Radial Through-Hole Multilayer Ceramic Capacitors
Goldmax, 300, Radial, Conformally Coated,
X8L Dielectric, 25 – 50 VDC
(Commercial and Automotive Grade)
Overview
KEMET’s Goldmax conformally coated radial through-hole
ceramic capacitors in X8L dielectric feature a +150°C
maximum operating temperature and is considered "general
purpose high temperature". These components are fixed,
ceramic dielectric capacitors that are suited for high
temperature bypass and decoupling applications or frequency
discriminating circuits, where Q and stability of capacitance
characteristics are not critical. X8L exhibits a predictable
change in capacitance with respect to time and voltage,
and boasts a minimal change in capacitance with reference
to ambient temperature up to +125°C. Beyond +125°C X8L
displays a wider variation in capacitance. Capacitance change
is limited to ±15% from −55°C to +125°C and +15, −40% from
+125°C to +150°C.
Driven by the demand for a more robust and reliable component,
X8L dielectric capacitors were developed for critical applications
where reliability at higher operating temperatures are a concern.
These capacitors are widely used in automotive circuits as well
as general high temperature applications.
In addition to commercial grade, automotive grade devices
are available and meet the demanding Automotive Electronics
Council's AEC–Q200 qualification requirements.
These devices meet the flame test requirements outlined in UL
Standard 94V–0.
Benefits
• Radial through-hole form factor
• Conformally coated
• Operating temperature range of -55°C to +150°C
• Lead (Pb)-Free, RoHS and REACH compliant
• DC voltage ratings of 25 and 50 V
• Capacitance offerings ranging from 0.15 μF up to 4.7 μF
• Available capacitance tolerances of ±5%, ±10% & ±20%
• Commercial and Automotive (AEC–Q200) grades available
• Non-polar device, minimizing installation concerns
• 100% pure matte tin-plated lead finish allowing for
excellent solderability
• SnPb-plated lead finish option available upon request
(60/40)
• Encapsulation meets flammability standard UL 94V–0
Built Into Tomorrow
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1093_GOLDMAX_X8L • 12/12/2023
1
Radial Through-Hole Multilayer Ceramic Capacitors
Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade)
Ordering Information
C
320
C
475
K
3
N
5
T
A
7301
Ceramic
Style/Size
Specification/
Series
Capacitance
Code (pF)
Capacitance
Tolerance1
Rated Voltage
(VDC)
Dielectric
Design
Lead
Finish2
Failure
Rate
Packaging
(C-Spec)
N=
X8L
5=
Multilayer
A=
N/A
See
"Packaging
C-Spec
Ordering
Options
Table" below
315
316
317
318
320
321
322
323
324
325
326
327
328
C=
Standard
First two digits J = ±5%
represent
K = ±10%
significant
M = ±20%
figures. Third
digit specifies
number of
zeros.
3 = 25
5 = 50
T = 100%
Matte Sn
H = SnPb
(60/40)*
Additional capacitance Tolerance offerings may be available. Contact KEMET for details.
Lead wire materials:
Standard: 100% matte tin (Sn) with nickel (Ni) underplate and steel core ( “T” designation).
Alternative 1: 60% tin (Sn)/40% lead (Pb) finish with copper-clad steel core ( “H” designation). KEMET does not recommend the usage of this
termination for Automotive applications.
Additional lead finish options may be available. Contact KEMET for details.
* Only available as Commercial Grade.
1
2
Applications
Typical applications include use in extreme environments, such as down-hole oil exploration, under-hood automotive, military
and aerospace.
Application Notes
These devices are not recommended for use in overmold applications and/or processes.
Packaging C-Spec Ordering Options Table
Packaging/Grade
Ordering Code (C-Spec)
Packaging Type1
Commercial Grade
Bulk Bag
12" Tape & Reel (16.0±0.5 mm lead length)
12" Tape & Reel (18.0 mm minimum lead length)
Ammo Pack (16.0±0.5 mm lead length)
Ammo Pack (18.0 mm minimum lead length)
Not required (Blank)
7301
7303
7305
7317
Automotive Grade
Bulk Bag Automotive Grade
12" Tape & Reel (16.0±0.5 mm lead length)
12" Tape & Reel (18.0 mm minimum lead length)
Ammo Pack (16.0±0.5 mm lead length)
Ammo Pack (18.0 mm minimum lead length)
1
9170
9170 7301
9170 7303
9170 7305
9170 7317
Bulk bag option is required for Size/Style C321 and C331.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1093_GOLDMAX_X8L • 12/12/2023
2
Radial Through-Hole Multilayer Ceramic Capacitors
Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade)
Dimensions – Inches (Millimeters)
Shoulder Bend (Short)
L
C317
C321
C322
T
Shoulder Bend (Tall)
L
C318
C323
C328
H
Seating Plane
F
F
S
L
T
LL
LL
F
S
L
C324
H
All Others:
0.06 max
(1.52 mm)
Snap-In Type 2
H
T
C315
C320
S
Outside Kink
C316
C326
C327
L
C340:
0.10 max
(2.54 mm)
H
Seating Plane
LL
Straight
T
T
Snap-In Type 1
L
T
C325
H
H
Seating Plane
Seating Plane
F
LL
C31X
C32X
C31X
C32X
1
F
Style /
Size
315
316
324
320
326
317
318
321
322
323
325
328
327
LL
F
S
E
S
E
Series
Seating Plane
LL
S
Lead Spacing
± 0.030 (0.78)
0.100 (2.54)
0.200 (5.08)
0.250 (6.35)
0.200 (5.08)
S
* May be supplied in a “Shoulder Bend” or “Straight” Lead
configuration. Please see Capacitance Range Waterfall section
of this document to determine lead configuration availability by
capacitance value.
L
Length
Maximum
H
Height
Maximum
T
Thickness
Maximum
0.150 (3.81)
0.150 (3.81)
0.200 (5.08)
0.200 (5.08)
0.200 (5.08)
0.150 (3.81)
0.150 (3.81)
0.200 (5.08)
0.200 (5.08)
0.200 (5.08)
0.200 (5.08)
0.200 (5.08)
0.200 (5.08)
0.120 (3.14)
0.230 (5.08)
0.230 (5.84)
0.230 (5.84)
0.300 (7.62)
0.200 (5.08)
0.235 (5.97)
0.260 (6.60)
0.260 (6.60)
0.300 (7.62)
0.300 (7.62)
0.300 (7.62)
0.320 (8.13)
0.100 (2.54)
0.100 (2.54)
0.125 (3.18)1
0.125 (3.18)1
0.125 (3.18)1
0.100 (2.54)
0.100 (2.54)
0.125 (3.18)1
0.125 (3.18)1
0.125 (3.18)1
0.125 (3.18)1
0.125 (3.18)1
0.125 (3.18)1
F
Lead Diameter
+0.004 (0.10),
−0.001 (0.025)
LL
Lead Length
Minimum
0.020 (0.51)
0.276 (7.00)
0.200 (5.08)
0.276 (7.00)
0.276 (7.00)
0.200 (5.08)
0.276 (7.00)
0.276 (7.00)
0.276 (7.00)
0.276 (7.00)
0.276 (7.00)
0.276 (7.00)
0.276 (7.00)
0.200 (5.08)
Thickness maximum (T) = 0.160" (4.07 mm) for capacitance values greater than or equal to 4.7 µF
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1093_GOLDMAX_X8L • 12/12/2023
3
Radial Through-Hole Multilayer Ceramic Capacitors
Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade)
Automotive C-Spec Information
KEMET Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. The
details regarding test methods and conditions are referenced in the document AEC–Q200, Stress Test Qualification for
Passive Components. These products are supported by a Product Change Notification (PCN) and Production Part Approval
Process warrant (PPAP).
Automotive products offered through our distribution channel have been assigned an inclusive ordering code C-Spec, “9170.”
This C-Spec was developed in order to better serve small and medium-sized companies that prefer an automotive grade
component, without the requirement to submit a customer Source Controlled Drawing (SCD) or specification for review by a
KEMET engineering specialist. This C-Spec is therefore not intended for use by KEMET’s OEM Automotive customers and are
not granted the same “privileges” as other automotive C-Specs. Customer PCN approval and PPAP request levels are limited
(see details below).
Product Change Notification (PCN)
The KEMET Product Change Notification system is used to communicate primarily the following types of changes:
• Product/process changes that affect product form, fit, function, and/or reliability
• Changes in manufacturing site
• Product obsolescence
Process/Product change
Obsolescence*
Days prior to
implementation
KEMET assigned
Yes (with approval and sign off)
Yes
180 days Minimum
9170
Yes (without approval)
Yes
90 days Minimum
1
1
Customer Notification due to:
KEMET Automotive
C-Spec
KEMET assigned C-Specs require the submittal of a customer SCD or customer specification for review. For additional information contact KEMET.
Production Part Approval Process (PPAP)
The purpose of the Production Part Approval Process is:
• To ensure that supplier can meet the manufacturability and quality requirements for the purchased parts.
• To provide the evidence that all customer engineering design record and specification requirements are properly
understood and fulfilled by the manufacturing organization.
• To demonstrate that the established manufacturing process has the potential to produce the part
PPAP Level
KEMET Automotive
C-Spec
1
2
3
4
5
KEMET assigned
●
●
●
●
●
1
9170
1
○
KEMET assigned C-Specs require the submittal of a customer SCD or customer specification for review. For additional information contact KEMET.
● Part number specific PPAP available with customer information included.
○ Product family PPAP only
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1093_GOLDMAX_X8L • 12/12/2023
4
Radial Through-Hole Multilayer Ceramic Capacitors
Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade)
Qualification/Certification
Commercial Grade products are subject to internal qualification. Details regarding test methods and conditions are
referenced in Table 2, Performance & Reliability.
Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details
regarding test methods and conditions are referenced in document AEC–Q200, Stress Test Qualification for Passive
Components. For additional information regarding the Automotive Electronics Council and AEC–Q200, please visit their
website at www.aecouncil.com.
Environmental Compliance
Lead (Pb)-free, REACH and RoHS compliant without exemptions when ordered with a 100% tin (Sn) wire lead finish.
Product ordered with tin/ lead (Sn60/Pb40) wire lead finish do not meet RoHS criteria.
Series
300 (C3XX)
1
Termination
Finish
(Wire Lead)
RoHS
Compliant
RoHS
Exemption
Code
REACH
Compliant1
Halogen
Free
100% Matte Sn
Yes
n/a
Yes
Yes
Sn60/Pb40
No
n/a
Yes
Yes
REACH compliance indicates product does not contain Substance/s of Very High Concern (SVHC
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1093_GOLDMAX_X8L • 12/12/2023
5
Radial Through-Hole Multilayer Ceramic Capacitors
Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade)
Electrical Parameters/Characteristics
Item
Parameters/Characteristics
Operating Temperature Range:
Capacitance Change with Reference to +25°C
and 0 VDC Applied (TCC):
Aging Rate (Maximum % Cap Loss/Decade Hour):
Dielectric Withstanding Voltage:
Dissipation Factor (DF) Maximum Limit at +25ºC:
Insulation Resistance (IR) Limit at +25°C:
−55°C to +150°C
±15%(−55ºC to +125ºC) +15%, −40% (+125°C to +150°C)
3.0%
250% of rated voltage
(5±1 seconds and charge/discharge not exceeding 50 mA at +25°C)
2.5%
1,000 megohm microfarads or 100 GΩ
(Rated voltage applied for 120±5 seconds at +25°C)
To obtain IR limit, divide MΩ-µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits.
Capacitance and dissipation factor (DF) measured under the following conditions:
1 MHz ±100 kHz and 1.0 Vrms ±0.2 V if capacitance ≤ 1,000 pF
1 kHz ±50 Hz and 1.0 Vrms ±0.2 V if capacitance > 1,000 pF
Note: When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature known
as Automatic Level Control (ALC). The ALC feature should be switched to "ON."
Post Environmental Limits
High Temperature Life, Biased Humidity and Storage Life
Dielectric
Rated
DC Voltage
Capacitance
Value
DF (%)
Capacitance
Shift
IR
X8L
25
50
All
5.0
3.0
±20%
10% of
initial limit
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1093_GOLDMAX_X8L • 12/12/2023
6
Radial Through-Hole Multilayer Ceramic Capacitors
Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade)
Table 1A - C31X Style/Size (0.100" & 0.200" Lead Spacing), Capacitance Range Waterfall
C315, C316, C317, C318 Style/Size (0.100" & 0.200" Lead Spacing)
Rated Voltage (VDC)
25
50
Voltage Code
3
5
Capacitance
0.15µF
0.18µF
0.22µF
0.27µF
0.33µF
0.39µF
0.47µF
0.56µF
0.68µF
Capacitance
Tolerance
Capacitance Code (Available
Capacitance)
154
184
224
274
334
394
474
564
684
154
184
224
Rated Voltage (VDC)
25
50
Voltage Code
3
5
J = ±5%
K = ±10%
M = ±20%
Table 1B - C32X Style/Size (0.100" & 0.200" Lead Spacing), Capacitance Range Waterfall
C320, C322, C323, C326, C328 Style/Size (0.100" & 0.200" Lead Spacing)
Rated Voltage (VDC)
25
50
Voltage Code
3
5
Capacitance
0.15µF
0.18µF
0.22µF
0.27µF
0.33µF
0.39µF
0.47µF
0.56µF
0.68µF
0.82µF
1.0µF
1.2µF
1.5µF
1.8µF
2.2µF
2.7µF
3.3µF
3.9µF
4.7µF
Capacitance
Tolerance
J = ±5%
K = ±10%
M = ±20%
Capacitance Code (Available
Capacitance)
154
184
224
274
334
394
474
564
684
824
105
125
155
185
225
275
335
395
475
154
184
224
394
474
564
684
824
105
125
155
185
225
Rated Voltage (VDC)
25
50
Voltage Code
3
5
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1093_GOLDMAX_X8L • 12/12/2023
7
Radial Through-Hole Multilayer Ceramic Capacitors
Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade)
Table 1C - C32X Style/Size (0.100" & 0.200" Lead Spacing), Capacitance Range Waterfall
C321, C324, C325, C327 Style/Size (0.100" & 0.200" Lead Spacing)
Rated Voltage (VDC)
25
50
Voltage Code
3
5
Capacitance
0.39µF
0.47µF
0.56µF
0.68µF
0.82µF
1.0µF
1.2µF
1.5µF
1.8µF
2.2µF
2.7µF
3.3µF
3.9µF
4.7µF
Capacitance
Tolerance
Capacitance Code (Available
Capacitance)
394
474
564
684
824
105
125
155
185
225
275
335
395
475
394
474
564
684
824
105
Rated Voltage (VDC)
25
50
Voltage Code
3
5
J = ±5%
K = ±10%
M = ±20%
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1093_GOLDMAX_X8L • 12/12/2023
8
Radial Through-Hole Multilayer Ceramic Capacitors
Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade)
Soldering Process
Recommended Soldering Methods:
• Solder Wave
• Hand Soldering (Manual)
Recommended Soldering Profile:
• Optimum Wave Solder Profile
Solder Wave Peak
Temperature 260ºC
Entrance to Solder Wave
Degrees – Cº
Flux Zone
250
225
200
175
150
125
100
75
50
25
Exit from Solder Wave
(Time in Wave – 2 to 4 Seconds)
Preheat Zone
Hot Air Debridging
Exit from
Solder
Machine
80ºC
to 120ºC
Entrance
to Solder
Machine
Free
Air
Cool
Bottom Side
Temperature
Range
Entrance to
In-Line Cleaner
Exit from
In-Line Cleaner
(time in cleaner
may be less)
Immersion in
Cleaning
Vapor
150ºC
Maximum
Top Side
Nominal
0
1
2
3
Time (Minutes)
4
5
6
Mounting
All encased capacitors will pass the Resistance to Soldering Heat of MIL-STD-202, Method 210, Condition B. This test
simulates wave solder topside board mount product. This demonstration of resistance to solder heat is in accordance with
what is believed to be the industry standard. More severe treatment must be considered reflective of an improper soldering
process.
The above figure is a recommended solder wave profile for both axial and radial leaded ceramic capacitors.
• Hand Soldering (Manual)
Manual Solder Profile with Pre-heating
Soldering
Gradual Cooling
Gradual Preheat
60 – 120 Seconds
Recommend 2.5°C/second
Maximum 3 seconds
Delta T < = 120ºC
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1093_GOLDMAX_X8L • 12/12/2023
9
Radial Through-Hole Multilayer Ceramic Capacitors
Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade)
Table 2 – Performance & Reliability: Test Methods and Conditions
Stress
Reference
Solderability
J–STD–002
Temperature Cycling
JESD22 Method JA–104
Biased Humidity
MIL–STD–202 Method
103
Moisture Resistance
Thermal Shock
High Temperature Life
Storage Life
Vibration
Resistance to Soldering
Heat
Terminal Strength
Mechanical Shock
Resistance to Solvents
MIL–STD–202 Method
106
MIL–STD–202 Method
107
MIL–STD–202 Method
108/EIA–198
MIL–STD–202 Method
108
MIL–STD–202 Method
204
MIL–STD–202 Method
210
MIL–STD–202 Method
211
MIL–STD–202 Method
213
MIL–STD–202 Method
215
Test or Inspection Method
Magnification 50X. Conditions:
a) Method A, at 235°C, Category 3
5 cycles (−55°C to +125°C), measurement at 24 hours +/−4 hours after test conclusion.
Load humidity, 1,000 hours 85°C/85%RH and rated voltage. Add 100 K ohm resistor.
Measurement at 24 hours +/−4 hours after test conclusion.
Low volt humidity, 1,000 hours 85C°/85%RH and 1.5 V. Add 100 K ohm resistor.
Measurement at 24 hours +/−4 hours after test conclusion.
t = 24 hours/cycle. Steps 7a & 7b not required. Unpowered. Measurement at 24 hours +/−4
hours after test conclusion.
−55ºC to +125°C. Note: Number of cycles required – 300. Maximum transfer time – 20
seconds. Dwell time – 15 minutes. Air – Air.
1,000 hours at 125°C (85°C for Z5U) with 1 X rated voltage applied.
125°C, 0 VDC for 1,000 hours.
5 g for 20 minutes, 12 cycles each of 3 orientations. Note: Use 8"X5" PCB .031" thick 7
secure points on one long side and 2 secure points at corners of opposite sides. Parts
mounted within 2" from any secure point. Test from 10–2000 Hz.
Condition B. No preheat of samples. Note: single wave solder – procedure 2.
Conditions A (454g), Condition C (227g)
Figure 1 of Method 213, Condition C.
Add aqueous wash chemical – OKEM Clean or equivalent.
Storage & Handling
The un-mounted storage life of a leaded ceramic capacitor is dependent upon storage and atmospheric conditions as
well as packaging materials. While the ceramic chips enveloped under the epoxy coating themselves are quite robust
in most environments, solderability of the wire lead on the final epoxy-coated product will be degraded by exposure to
high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be
degraded by high temperature and exposure to direct sunlight – reels may soften or warp, and tape peel force may increase.
KEMET recommends storing the un-mounted capacitors in their original packaging, in a location away from direct sunlight,
and where the temperature and relative humidity do not exceed 40 degrees centigrade and 70% respectively. For optimum
solderability, capacitor stock should be used promptly, preferably within 18 months of receipt. For applications requiring
pre-tinning of components, storage life may be extended if solderability is verified. Before cleaning, bonding or molding these
devices, it is important to verify that your process does not affect product quality and performance. KEMET recommends
testing and evaluating the performance of a cleaned, bonded or molded product prior to implementing and/or qualifying any
of these processes.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1093_GOLDMAX_X8L • 12/12/2023
10
Radial Through-Hole Multilayer Ceramic Capacitors
Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade)
Construction
Epoxy
Encapsulation
Finish Layer
(Sn)
Detailed Cross Section
Barrier Layer
(Ni)
Base Metal
(Cu)
Lead Attach Solder
(95Sn/5Ag)
Lead Attach Solder
(95Sn/5Ag)
Dielectric Material
(BaTiO3)
Inner Electrodes
(Ni)
Base Metal
(Cu)
Finish Layer
(Sn)
Barrier Layer
(Ni)
Core Metal
Barrier Layer
Lead Wire
Std
Alt 1
Steel
Cu
Ni
100% 60% Sn
Finish Layer Matte Sn 40% Pb
Alt 2
Cu
—
60% Sn
40% Pb
Inner Electrodes
(Ni)
Epoxy
Encapsulation
Marking
STYLE/SIZE C31X, C32X
KEMET ID
Capacitance
Tolerance Code
Rated Capacitance Code
Rated
Voltage Code
Front
Back
To properly request the inclusion of the date code in the marking ordering code
please contact your KEMET representative.
1
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1093_GOLDMAX_X8L • 12/12/2023
11
Radial Through-Hole Multilayer Ceramic Capacitors
Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade)
Packaging Quantities
Style/
Size
315
316
317
318
320
321
322
323
324
325
326
327
328
Standard Bulk
Quantity
Ammo Pack
Quantity
Maximum
Reel Quantity
Maximum
(12" Reel)
2,500
2,500
N/A
N/A
2,500
2,500
500/Bag
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1093_GOLDMAX_X8L • 12/12/2023
12
Radial Through-Hole Multilayer Ceramic Capacitors
Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade)
Tape & Reel Packaging Information
KEMET offers standard reeling of Molded and Conformally
Coated Radial Leaded Capacitors in accordance with EIA
standard 468. Parts are taped to a tagboard carrier strip,
and wound on a reel as shown in Figure 1. Kraft paper
interleaving is inserted between the layers of capacitors on
the reel. Ammopack is also available, with the same lead
tape configuration and package quantities.
P
H1 D0
∆H
P2
H
1mm Maximum
(0.039”)
W2
P1
H0
W0
F
W
Carrier
L1
T
Tape
P0
Ceramic Radial Tape and Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
D0
±0.2 (0.008)
P0
±0.3 (0.012)
∆H
±0.2 (0.008)
L1
Maximum
t
±0.2 (0.008)
T
Maximum
W
+1.0/−0.5
(+0.039/−0.020)
W0
Minimum
W2
Maximum
4.00 (0.157)
12.7 (0.500)
4.0 (0.157)
1.0 (0.039)
0.7 (0.051)
1.5 (0.059)
18.0 (0.709)
5.0 (0.197)
3.0 (0.118)
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1093_GOLDMAX_X8L • 12/12/2023
13
Radial Through-Hole Multilayer Ceramic Capacitors
Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade)
Ceramic Radial Tape and Reel Dimensions cont.
Metric will govern
Variable Dimensions — Millimeters (Inches)
F
±0.78 (0.030)1
P1
±0.30 (0.012)1
P
±0.3 (0.012)
P2
±1.3 (0.051)
2.54 (0.100)
5.08 (0.200)
12.7 (0.500)
6.35 (0.250)
4.32 (0.170)
3.89 (0.153)
12.7 (0.500)
6.35 (0.250)
5.08 (0.200)
3.81 (0.150)
12.7 (0.500)
6.35 (0.250)
5.59 (0.220)
3.25 (0.128)
12.7 (0.500)
6.35 (0.250)
6.98 (0.275)
2.54 (0.100)
12.7 (0.500)
6.35 (0.250)
7.62 (0.300)
2.24 (0.088)
12.7 (0.500)
6.35 (0.250)
9.52 (0.375)
7.62 (0.300)
12.7 (0.500)
6.35 (0.250)
10.16 (0.400)
7.34 (0.290)
25.4 (1.000)
N/A
12.06 (0.475)
6.35 (0.250)
25.4 (1.000)
N/A
14.60 (0.575)
5.08 (0.200)
25.4 (1.000)
N/A
17.14 (0.675)
3.81 (0.15)
25.4 (1.000)
N/A
H
H0
Straight Lead Configuration
Formed Lead Configuration2
Packaging C-Spec3
7301/7305
7303/7317
7301/7305
7303/7317
16.0±0.5
(0.630±0.020)
18.0 (0.709)
Minimum
16.0±0.5
(0.630±0.020)
18.0 (0.709)
Minimum
Measured at the egress from the carrier tape, on the component side.
Formed lead confi guration includes: "shoulder bend", "inside kink", "outside kink", and "snap-in". For more information regarding available lead
confi gurations see "Dimensions" section of this document.
3
The "Packaging C-Spec" is a 4 digit code which identifi es the packaging type, lead length and/or lead material. When ordering, the proper code must be
included in the 15th through 18th character positions of the ordering code. See "Ordering Information" section of this document for further details.
1
2
Symbol Reference Table
D0
P0
P
F
P1
P2
H
H0
H1
∆H
L1
t
W
W0
W2
Sprocket Hole Diameter
Sprocket Hole Pitch
Component Pitch
Lead Spacing
Sprocket Hole Center to Lead Center
Sprocket Hole Center To Component Center
Height to Seating Plane (Straight Leads Only)
Height to Seating Plane (Formed Leads Only)
Component Height Above Tape Center
Component Alignment
Lead Protrusion
Composite Tape Thickness
Carrier Tape Width
Hold-Down Tape Width
Hold-Down Tape Location
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1093_GOLDMAX_X8L • 12/12/2023
14
Radial Through-Hole Multilayer Ceramic Capacitors
Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade)
KEMET Electronics Corporation Sales Offices
For a complete list of our global sales offices, please visit www.kemet.com/sales.
Disclaimer
YAGEO Corporation and its affiliates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space flight.
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes
no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury
or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
C1093_GOLDMAX_X8L • 12/12/2023
15