C4AFABU4100T11K

Printed Circuit Board Mount Power Film Capacitors C4AF, Radial, 2 or 4 Leads, 250 – 600 VAC, for Harsh Environment AC Filtering (Automotive Grade) Overview Applications The C4AF capacitor is a polypropylene metallized film capacitor with a rectangular, plastic box-type design filled with resin, and uses 2 or 4 tinned wires. These capacitors are intended to withstand harsh environmental conditions. Typical applications include AC and harmonic filtering in UPS systems, motor drives, renewable energy, and automotive systems. Automotive grade devices meet the demanding Automotive Electronics Council's AEC–Q200 qualification requirements. Benefits • C4AF-T High Ripple Current & THB • C4AF-F Miniaturized & Advanced THB • Self-healing • Low loss • High contact reliability • Optimized AC voltage performance • Suitable for high frequency applications • Able to withstand harsh environmental conditions • Automotive grades (AEC–Q200) Simulator Tool and Lifetime Expectancy model available online: K-SIM K-LEM Part Number System C4 A Series Type C4 = MKP Power Capacitors A= Box, wire terminals F 1 Rated Application Voltage (VAC) F= AC filtering 1 = 250 9 = 310 7 = 350 3 = 400 A = 500 B = 600 B W 5330 T 3 N J Case Terminals Code Capacitance Code (pF) Release Lead Diameter (mm) Size Code: B x H x L (mm) Tolerance U = 2 pins W = 4 pins Digits 2 – 4 indicate the first three digits of the capacitance value. First digit indicates the number of zeros to be added. B, E = Box plastic case A = THB 500 hours 85°C/85% R.H. (Not for new design) T = THB 1,000 hours 85°C/85% R.H. 1 = 0.8 3 = 1.2 See Dimensions Table for valid case sizes K = 10% F = THB 1,500 hours 85°C/85% R.H. Vrac Built Into Tomorrow © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3116_C4AF • 8/15/2023 1 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AF, Radial, 2 or 4 Leads, 250 – 600 VAC, for Harsh Environment AC Filtering (Automotive Grade) Dimensions – Millimeters T T L H S 0.5 LL F 0.5 S1 p p p1 2-pin 4-pin Size Code S S1 Digit 6 Digit 14 Nominal Tolerance Nominal B W 27.5 ±0.4 - T Tolerance Nominal - 11.0 H L LL F Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance +0.3/−0.7 20.0 +0.2/−0.7 31.5 +0.5/−0.7 6 +0/−2 0.8 ±0.05 B X 27.5 ±0.4 - - 13.0 +0.3/−0.7 25.0 +0.2/−0.7 31.5 +0.5/−0.7 6 +0/−2 0.8 ±0.05 B Y 27.5 ±0.4 - - 14.0 +0.3/−0.7 28.0 +0.2/−0.7 31.5 +0.5/−0.7 6 +0/−2 0.8 ±0.05 B 1 27.5 ±0.4 - - 19.0 +0.3/−0.7 29.0 +0.2/−0.7 31.5 +0.5/−0.7 6 +0/−2 0.8 ±0.05 B 2 27.5 ±0.4 - - 22.0 +0.3/−0.7 37.0 +0.2/−0.7 31.5 +0.5/−0.7 6 +0/−2 0.8 ±0.05 B F 37.5 ±0.4 10.2 ±0.4 20.0 +0.4/−0.7 40.0 +0.2/−0.7 42.0 +0.6/−0.7 6 +0/−2 1.2 ±0.05 B J 37.5 ±0.4 10.2 ±0.4 24.0 +0.4/−0.7 44.0 +0.2/−0.7 42.0 +0.6/−0.7 6 +0/−2 1.2 ±0.05 B L 37.5 ±0.4 20.3 ±0.4 28.0 +0.4/−0.7 37.0 +0.2/−0.7 42.0 +0.6/−0.7 6 +0/−2 1.2 ±0.05 B O 37.5 ±0.4 20.3 ±0.4 30.0 +0.4/−0.7 45.0 +0.2/−0.7 42.0 +0.6/−0.7 6 +0/−2 1.2 ±0.05 B M 52.5 ±0.4 20.3 ±0.4 30.0 +0.5/−0.7 45.0 +0.3/−0.7 57.5 +0.6/−0.7 6 +0/−2 1.2 ±0.05 B N 52.5 ±0.4 20.3 ±0.4 35.0 +0.5/−0.7 50.0 +0.3/−0.7 57.5 +0.8/−0.7 6 +0/−2 1.2 ±0.05 E A 52.5 ±0.4 20.3 ±0.4 45.0 +0.5/−0.7 56.0 +0.3/−0.7 57.5 +0.8/−0.7 6 +0/−2 1.2 ±0.05 E B 52.5 ±0.4 20.3 ±0.4 45.0 +0.5/−0.7 65.0 +0.3/−0.7 57.5 +0.8/−0.7 6 +0/−2 1.2 ±0.05 Qualification Reference Standards Climatic Category IEC 61071, EN 61071, VDE0560 55/105/56 according to IEC 60068–1 Automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AEC–Q200, Stress Test Qualification for Passive Components. For additional information regarding the Automotive Electronics Council and AEC–Q200, please visit their website at www.aecouncil.com. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3116_C4AF • 8/15/2023 2 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AF, Radial, 2 or 4 Leads, 250 – 600 VAC, for Harsh Environment AC Filtering (Automotive Grade) General Technical Data Dielectric Application Special Features Climatic Category Polypropylene metallized film, non-inductive type, self-healing property AC Filtering (250 VAC, 310 VAC, 350 VAC, 400 VAC, 500 VAC, 600 VAC) 250 VAC rating recommended ONLY for controlled output filtering AEC-Q200 qualified 55/105/56 IEC 60068-1 Maximum Operating Temperature 105 °C Lower Operating Temperature –55°C Standard Protection Installation Leads Packaging RoHS Compliance IEC 61071, EN 61071, VDE0560, AEC-Q200 Solvent resistant plastic case UL 94 V-0 compliant Thermosetting resin sealing UL 94 V-0 compliant Any position Tinned wires - standard lead wire length 6 (+0/−2) mm Packed in cardboard trays with protection for the terminals Compliant with Directive 2002/95/EC and Directive 2011/65/EU of the European Parliament and of the Council on 8 June 2011, including Commission Delegated Directive (EU) 2015/863 amending Annex II to Directive 2011/65/EU. Electrical Characteristics Rated Capacitance Range Rated Voltage (VNAC) Range Capacitance Tolerance Dissipation Factor PP Maximum (tgδ0) Surge Voltage Overvoltage (IEC 61071) Peak Non-Repetitive Current Insulation Resistance Capacitance Deviation in the operating temperature range −55 to 105°C Temperature Storage Storage time Permissible Relative Humidity - Storage 1 to 75 µF 250 to 600 VAC (50/60 Hz) ±10% (K) measured at T = +25°C ±5°C ≤ 0.0007 with T = 25°C ±5°C 1.5 * VNDC for maximum 10 times in lifetime at T = 25°C ±5°C 1.15 * VNDC for maximum 30 minutes, once per day 1.3 * VNDC for maximum 1 minute, once per day 1.5 * IPKR , for maximum 1,000 times in lifetime IR x C ≥ 30,000 seconds at 100 VDC 1 minute at T = +25°C, ±5°C ±2.5% maximum on capacitance value measured at T = +25°C, ±5°C –40 to +80°C ≤ 36 months from the date marked on the label glued to the package Annual average ≤ 70%, 85% on 30 days/year randomly distributed throughout year. Dewing not admissible. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3116_C4AF • 8/15/2023 3 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AF, Radial, 2 or 4 Leads, 250 – 600 VAC, for Harsh Environment AC Filtering (Automotive Grade) Life Expectancy Life Expectancy Failure Rate at 40°C and 0.5 x VR acc. to IEC 61709 Please refer to our Lifetime Expectancy Model ≤ 5 FIT Test Method Peak Non-Repetitive Maximum Current Test Voltage Terminal to Terminal VTT Test Voltage Terminal to Case VTC Endurance Test Damp Heat I PKR x 1.5 1.5 * VNDC for 10 seconds 2 k VAC – 50/60 Hz for 60 seconds 500 hours + 500 hours at 1.25 x rated voltage at 85°C 500 hours + 500 hours at 1.25 x operative voltage at 105°C IEC 60068-2-78 Test Voltages: THB Test 85/85 with Voltage Release "A": 500 hours Release "T": 1,000 hours THB Test 85/85 with Rated Voltage Release "F": 1,500 hours Change of Temperature 250 and 310 VNAC version: 350 and 400 VNAC version: 500 VNAC version: 600 VNAC version: 240 VAC 310 VAC 410 VAC 500 VAC Performance: |ΔC/C|