Printed Circuit Board Mount Power Film Capacitors
C4AQ Miniaturized, Radial, 2 or 4 Leads,
500 – 1,200 VDC, for DC Link (Automotive Grade)
Overview
Applications
The C4AQ M capacitor is a miniaturized polypropylene
metallized film capacitor with a rectangular, plastic box-type
design, filled with resin, and uses 2 or 4 tinned wires.
Typical applications include DC filtering, DC link, power
electronics, energy storage, renewable energy grid interface,
motor drives, and automotive applications.
Automotive grade devices meet the demanding Automotive
Electronics Council's AEC-Q200 qualification requirements.
Benefits
• Miniaturized Sizes
• Maximum Temperature: 125°C (passive)
• Self-healing
• Low loss
• Low ESL
• Low profile dimensions available
• High ripple current
• High dV/dt
• High capacitance density
• High contact reliability
• Suitable for high frequency applications
• Automotive Grades (AEC-Q200)
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Part Number System
C4
A
Q
U
B
W
5270
M
3
N
J
Series
Type
Application
Rated
Voltage
(VDC)
Case
Terminals
Code
Capacitance
Code (pF)
Release
Lead
Diameter
(mm)
Size
Code
Tolerance
C4 =
MKP
Power
Capacitors
A=
Box,
wire
terminals
Q=
DC Link
Automotive
Grade
U = 2 pins
W = 4 pins
Digits two –
four indicate
the first three
digits of the
capacitance
value. First
digit indicates
the number
of zeros to be
added.
L = 500
J = 700
I = 800
O = 900
N = 1000
Q = 1,100
P = 1,200
B, E = Box plastic
case
L = Low Profile
box, plastic case
M=
Standard
Miniature
Version
1 = 0.8
2 = 1.0
3 = 1.2
See
dimensions
table below
for valid
case sizes
J = 5%
K = 10%
Built Into Tomorrow
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3125_C4AQ_M • 12/1/2020
1
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AQ Miniaturized, Radial, 2 or 4 Leads, 500 – 1,200 VDC, for DC Link (Automotive Grade)
Dimensions – Millimeters
T
T
L
H
S
0.5
LL
F
0.5
S1
p
p
p1
2-pin
4-pin
Size Code
S
S1
Digit 6
Digit 14
Nominal
Tolerance
Nominal
B
W
27.5
±0.4
-
T
Tolerance Nominal
-
11.0
H
L
LL
F
Tolerance
Nominal
Tolerance
Nominal
Tolerance
Nominal
Tolerance
Nominal
Tolerance
+0.3/-0.7
20.0
+0.2/-0.7
31.5
+0.5/-0.7
6
+0/-2
0.8
±0.05
B
X
27.5
±0.4
-
-
13.0
+0.3/-0.7
25.0
+0.2/-0.7
31.5
+0.5/-0.7
6
+0/-2
0.8
±0.05
B
Y
27.5
±0.4
-
-
14.0
+0.3/-0.7
28.0
+0.2/-0.7
31.5
+0.5/-0.7
6
+0/-2
0.8
±0.05
B
8
27.5
±0.4
-
-
16.0
+0.3/-0.7
30.0
+0.2/-0.7
32.0
+0.5/-0.7
6
+0/-2
0.8
±0.05
B
E
27.5
±0.4
-
-
18.0
+0.6/-0.7
33.0
+0.2/-0.7
32.0
+0.5/-0.7
6
+0/-2
0.8
±0.05
B
1
27.5
±0.4
-
-
19.0
+0.3/-0.7
29.0
+0.2/-0.7
31.5
+0.5/-0.7
6
+0/-2
0.8
±0.05
B
2
27.5
±0.4
-
-
22.0
+0.3/-0.7
37.0
+0.2/-0.7
31.5
+0.5/-0.7
6
+0/-2
0.8
±0.05
B
F
37.5
±0.4
10.2
±0.4
20.0
+0.4/-0.7
40.0
+0.2/-0.7
42.0
+0.6/-0.7
6
+0/-2
1.2
±0.05
B
J
37.5
±0.4
10.2
±0.4
28.0
+0.4/-0.7
37.0
+0.2/-0.7
42.0
+0.6/-0.7
6
+0/-2
1.2
±0.05
B
H
37.5
±0.4
10.2
±0.4
24.0
+0.4/-0.7
44.0
+0.2/-0.7
41.5
+0.6/-0.7
6
+0/-2
1.2
±0.05
B
L
37.5
±0.4
20.3
±0.4
30.0
+0.4/-0.7
45.0
+0.2/-0.7
42.0
+0.6/-0.7
6
+0/-2
1.2
±0.05
B
6
37.5
±0.4
20.3
±0.4
35.0
+0.4/-0.7
46.0
+0.2/-0.7
42.0
+0.6/-0.7
6
+0/-2
1.2
±0.05
B
O
37.5
±0.4
20.3
±0.4
35.0
+0.4/-0.7
50.0
+0.2/-0.7
42.0
+0.6/-0.7
6
+0/-2
1.2
±0.05
E
C
37.5
±0.4
20.3
±0.4
38.0
+0.5/-0.7
57.0
+0.3/-0.7
42.0
+0.6/-0.7
6
+0/-2
1.2
±0.05
B
M
52.5
±0.4
20.3
±0.4
30.0
+0.5/-0.7
45.0
+0.3/-0.7
57.5
+0.8/-0.7
6
+0/-2
1.2
±0.05
B
N
52.5
±0.4
20.3
±0.4
35.0
+0.5/-0.7
50.0
+0.3/-0.7
57.5
+0.8/-0.7
6
+0/-2
1.2
±0.05
E
A
52.5
±0.4
20.3
±0.4
45.0
+0.5/-0.7
56.0
+0.3/-0.7
57.5
+0.8/-0.7
6
+0/-2
1.2
±0.05
E
B
52.5
±0.4
20.3
±0.4
45.0
+0.5/-0.7
65.0
+0.3/-0.7
57.5
+0.8/-0.7
6
+0/-2
1.2
±0.05
L
1
27.7
±0.4
-
-
21.0
+0.3/-0.7
12.5
+0.2/-0.7
32.0
+0.5/-0.7
6
+0/-2
0.8
±0.05
L
2
27.5
±0.4
-
-
24.0
+0.3/-0.7
15.0
+0.2/-0.7
32.0
+0.5/-0.7
6
+0/-2
0.8
±0.05
L
9
27.5
±0.4
-
-
31.0
+0.3/-0.7
19.0
+0.2/-0.7
32.0
+0.5/-0.7
6
+0/-2
0.8
±0.05
L
4
37.5
±0.4
10.2
±0.4
24.0
+0.4/-0.7
15.0
+0.2/-0.7
41.5
+0.6/-0.7
6
+0/-2
1.2
±0.05
L
3
37.5
±0.4
10.2
±0.4
24.0
+0.4/-0.7
19.0
+0.2/-0.7
41.5
+0.6/-0.7
6
+0/-2
1.2
±0.05
L
6
37.5
±0.4
20.3
±0.4
35.0
+0.4/-0.7
24.0
+0.2/-0.7
42.0
+0.6/-0.7
6
+0/-2
1.2
±0.05
L
8
37.5
±0.4
20.3
±0.4
43.0
+0.4/-0.7
25.0
+0.2/-0.7
42.0
+0.6/-0.7
6
+0/-2
1.2
±0.05
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3125_C4AQ_M • 12/1/2020
2
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AQ Miniaturized, Radial, 2 or 4 Leads, 500 – 1,200 VDC, for DC Link (Automotive Grade)
Qualification
Reference Standards
Climatic Category
IEC 61071, EN 61071, VDE0560
55/105/56 according to IEC
60068-1
Automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and
conditions are referenced in document AEC-Q200, Stress Test Qualification for Passive Components. For additional information regarding the
Automotive Electronics Council and AEC-Q200, visit the AEC website at www.aecouncil.com.
General Technical Data
Dielectric
Application
Special Features
Climatic Category
Temperature Range
Polypropylene metallized film, non-inductive type, self-healing property
DC filtering, DC link
AEC–Q200 qualified
55/105/56 IEC 60068–1
−55°C to +105°C
Endurance Test
500 hours + 500 hours at 1.3 x VNDC at 85°C
Standard
IEC 61071, EN 61071, VDE0560, AEC–Q200
Protection
Installation
Leads
Packaging
RoHS Compliance
Solvent resistant plastic case UL 94 V–0 compliant
Thermosetting resin sealing UL 94 V–0 compliant
Any position
Tinned wires, standard lead wire length 6 (+0/−2) mm
Packed in cardboard trays with protection for the terminals
Compliant with Directive 2002/95/EC and Directive 2011/65/EU of the
European Parliament and the Council of the EU on 8 June 2011, including
the Commission Delegated Directive (EU) 2015/863 that amended Annex
II to Directive 2011/65/EU.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3125_C4AQ_M • 12/1/2020
3
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AQ Miniaturized, Radial, 2 or 4 Leads, 500 – 1,200 VDC, for DC Link (Automotive Grade)
Electrical Characteristics
Rated Capacitance Range
Rated Voltage (VNDC) Range
Capacitance Tolerance
Dissipation Factor PP Typical
(tgδ0)
Surge Voltage
Overvoltage (IEC 61071)
Peak Non-Repetitive Current
Insulation Resistance
Capacitance Deviation in
Operation
Temperature Storage
Storage time
Permissible Relative
Humidity - Storage
1.1 – 210 µF
500 to 1,200 VDC
±5% (J) or ±10% (K) measured at T = +25°C ±5°C
≤ 0.0002 at 10 kHz with T = 25°C ±5°C
1.5 * VNDC for maximum 10 times in a lifetime at 25°C ±5°C
1.15 * VNDC for maximum 30 minutes, once per day
1.3 * VNDC for maximum 1 minute, once per day
1.5 * IPKR for maximum 1,000 times in a lifetime
IR x C ≥ 30.000 seconds at 100 VDC 1 minute at T = +25°C ±5°C
±2.0% maximum on capacitance value measured at T = +25°C ±5°C
−40 to +80°C
≤ 36 months from the date marked on the label glued to the package
Annual average ≤ 70%, 85% on 30 days/year randomly distributed
throughout year. Dewing not admissible.
Life Expectancy
120,000 hours at VNDC at hot spot temperature THS = +70°C
60,000 hours at VNDC at hot spot temperature THS = +85°C
Life Expectancy
40,000 hours at VOP105 at hot spot temperature THS = +105°C
500 hours at 0.6 x VOP85 at hot spot temperature THS = +115°C
200 hours at 0.5 x VOP85 at hot spot temperature THS = +125°C
Capacitance Drop at End of Life
Failure Rate IEC 61709
−5% (typical)
≤ 280 FIT at VNDC at hot spot temperature THS = +85°C
≤ 130 FIT at VOP70 at hot spot temperature THS = +70°C
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3125_C4AQ_M • 12/1/2020
4
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AQ Miniaturized, Radial, 2 or 4 Leads, 500 – 1,200 VDC, for DC Link (Automotive Grade)
Test Method
Test Voltage Between Terminals
1.5 * VNDC for 10 seconds or 1.65 * VNDC for 2 seconds,
at T = +25°C ±5°C
Test Voltage Between Terminals
and Case
3.2 k VAC 50 Hz for 2 seconds
Damp Heat
IEC 60068-2-78
Change of Temperature
IEC 60068-2-14
Biased Humidity Test 40°C/93%
R.H. at VNDC - 1,000 hours
|ΔC/C 0 | ≤ 5%
|ΔDF/DF0 | ≤ 200% (at 10 kHz)
IR ≥ 50% of initial limit
Biased Humidity Test 60°C/95%
R.H. at VNDC - 1,000 hours
|ΔC/C 0 | ≤ 5%
|ΔDF/DF0 | ≤ 200% (at 10 kHz)
IR ≥ 100 MΩ
Operative Voltage Derating
Symbol
Operating Voltage at 70°C (THS)
Voltage (VDC)
VOP70
600
800
Rated Voltage at 85°C (THS)
VNDC
500
700
Operating Voltage at 105°C (THS)
VOP105
350
490
1,200
1,320
1,440
800
900
1,000
1,100
1,200
560
650
700
770
850
Maximum Overtemperature ∆Tlim vs TAMB
Maximum Irms vs. TAMB
120%
30
100%
Temperature TAMB(°C)
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
115
105
110
95
100
90
85
80
75
70
65
0%
60
0
25
20%
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
125
130
135
5
55
40%
50
10
60%
45
15
80%
40
20
35
Maximum Irms
25
∆Tlim (°C)
1100
30
35
960
Temperature TAMB(°C)
F3125_C4AQ_M • 12/1/2020
5
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AQ Miniaturized, Radial, 2 or 4 Leads, 500 – 1,200 VDC, for DC Link (Automotive Grade)
Typical Waveforms
VNDC / VPK+
V
VPK-
t
VNDC / VPK+
VPK-
V
t
VNDC / VPK+
VPK-
V
t
The applied peak-to-peak ripple voltage shall not exceed 0.1 x VNDC .
The peak voltage shall not exceed the rated voltage VNDC .
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3125_C4AQ_M • 12/1/2020
6
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AQ Miniaturized, Radial, 2 or 4 Leads, 500 – 1,200 VDC, for DC Link (Automotive Grade)
Life Expectancy/Failure Quota Graphs
Lifetime Curve at Hot Spot Temperature
1,000,000
Lifetime Expectancy (h)
100,000
10,000
1,000
125°C
115°C
110°C
105°C
95°C
85°C
70°C
100
10
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
V/Vrated
Notes:
THS = TAMB + ΔT
ΔT = ESR * Irms2 * Rth
Irms should be limited to values granting ΔT ≤ 30°C
Confidence Level = 90%
FIT at Hot Spot Temperature
10,000
1,000
100
125°C FIT
115°C FIT
110°C FIT
105°C FIT
95°C FIT
85°C FIT
70°C FIT
10
1
0.1
0.3
0.5
0.7
0.9
1.1
1.3
V/Vrated
Notes:
Failure rate λ (FIT) data based on IEC 61709 standard
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3125_C4AQ_M • 12/1/2020
7
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AQ Miniaturized, Radial, 2 or 4 Leads, 500 – 1,200 VDC, for DC Link (Automotive Grade)
Environmental Compliance
As a leading global supplier of electronic components and an environmentally conscious company, KEMET continually
aspires to improve the environmental effects of our manufacturing processes and our finished electronic components.
In Europe (RoHS Directive) and in some other geographical areas such as China (China RoHS), legislation has been enacted
to prevent or otherwise limit the use of certain hazardous materials, including lead (Pb), in electronic equipment. KEMET
monitors legislation globally to ensure compliance and endeavors to adjust our manufacturing processes and/or electronic
components as may be required by applicable law.
For military, medical, automotive, and some commercial applications, the use of lead (Pb) in the termination is necessary
and/or required by design. KEMET is committed to communicating RoHS compliance to our customers. Information related
to RoHS compliance will be provided in data sheets and using specific identifiers on the packaging labels.
All KEMET power film capacitors are RoHS compliant.
Materials & Environment
The selection of raw materials that KEMET uses for the production of its electronic components is the result of extensive
experience. KEMET directs specific attention toward environmental protection. KEMET selects its suppliers according to
ISO 9001 standards and performs statistical analyses on raw materials before acceptance for use in manufacturing our
electronic components. All materials are, to the best of KEMET’s knowledge, non-toxic and free from cadmium; mercury;
chrome and compounds; polychlorine triphenyl (PCB); bromide and chlorinedioxins bromurate clorurate; CFC and HCFC;
and asbestos.
Dissipation Factor
Dissipation factor is a complex function involved with capacitor inefficiency. The tgδ may vary up and down with increased
temperature. For more information, refer to Performance Characteristics.
Sealing
Hermetically Sealed Capacitors
As the temperature increases, the pressure inside the capacitor increases. If the internal pressure is high enough, it can
cause a breach in the capacitor. Such a breach can result in leakage, impregnation, filling fluid, or moisture susceptibility.
Barometric Pressure
The altitude at which hermetically sealed capacitors are operated controls the capacitor's voltage rating. As the barometric
pressure decreases, the susceptibility to terminal arc-over increases. Non-hermetic capacitors can be affected by internal
stresses due to pressure changes. These effects can be in the form of capacitance changes, dielectric arc-over, and/or low
insulation resistance. Altitude can also affect heat transfer. Heat that is generated in an operation cannot be dissipated
properly, and high RI2 losses and eventual failure can result.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3125_C4AQ_M • 12/1/2020
8
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AQ Miniaturized, Radial, 2 or 4 Leads, 500 – 1,200 VDC, for DC Link (Automotive Grade)
Table 1 – Ratings & Part Number Reference
Cap
Value VDC
(µF)
Dimensions
(mm)
T
H
L
S
S1
dV/dt Ipkr
ESL
ESR
70°C at
10 kHz
V/µs
nH
mΩ
Apk
Irms*
70°C at
10 kHz
Arms
Rth
(HS/Amb) Packaging
Quantity
(°C/W)
PART
NUMBER
VOP70 at 70°C = 600 VDC; VNDC at 85°C = 500 VDC; VOP105 at 105°C = 350 VDC
5.6
10
12.5
14
15
18
25
40
50
54
70
80
90
110
100
130
180
210
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
11
13
14
16
19
18
22
20
28
24
30
35
35
38
30
35
45
45
20
25
28
30
29
33
37
40
37
44
45
46
50
57
45
50
56
65
31.5
31.5
31.5
32
31.5
32
31.5
42
42
41.5
42
42
42
42
57.5
57.5
57.5
57.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
52.5
52.5
52.5
52.5
/
/
/
/
/
/
/
10.2
10.2
10.2
20.3
20.3
20.3
20.3
20.3
20.3
20.3
20.3
65
65
65
65
65
65
65
30
30
30
30
30
30
30
15
15
15
15
364
650
812.5
910
975
1170
1625
1200
1500
1620
2100
2400
2700
3300
1500
1950
2700
3150
17
22
24
25
25
27
28
12
10
13
13
13
13
17
13
15
17
19
3.3
5.6
7
8.8
10
11
15
25
30
33
40
45
50
66
55
75
110
130
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
11
13
14
16
19
18
22
20
28
24
30
35
35
38
30
35
45
45
20
25
28
30
29
33
37
40
37
44
45
46
50
57
45
50
56
65
31.5
31.5
31.5
32
31.5
32
31.5
42
42
41.5
42
42
42
42
57.5
57.5
57.5
57.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
52.5
52.5
52.5
52.5
/
/
/
/
/
/
/
10.2
10.2
10.2
20.3
20.3
20.3
20.3
20.3
20.3
20.3
20.3
65
65
65
65
65
65
65
30
30
30
30
30
30
30
15
15
15
15
214.5
364
455
572
650
715
975
750
900
990
1200
1350
1500
1980
825
1125
1650
1950
17
22
24
25
25
27
28
12
10
13
13
13
13
17
13
15
17
19
T
H
L
S
S1
V/µs
Apk
nH
ESL
12.7
7.8
6.7
6.2
5.6
5.3
4.4
3.4
2.8
2.6
2.1
1.8
1.7
1.4
2.9
2.3
1.7
1.6
6.8
9.6
11.0
12.0
12.9
13.7
16.0
19.6
22.8
24.2
29.1
32.4
35.1
40.8
27.4
33.3
42.6
47.7
44
36
33
29
29
27
23
20
18
17
15
14
13
11
12
10
8
7
256
234
96
88
72
80
64
58
36
44
36
30
30
24
27
23
18
18
C4AQLBU4560M1WK
C4AQLBU5100M1XK
C4AQLBU5125M1YK
C4AQLBU5140M18K
C4AQLBU5150M11K
C4AQLBU5180M1EK
C4AQLBU5250M12K
C4AQLBW5400M3FK
C4AQLBW5500M3JK
C4AQLBW5540M3HK
C4AQLBW5700M3LK
C4AQLBW5800M36K
C4AQLBW5900M3OK
C4AQLEW6110M3CK
C4AQLBW6100M3MK
C4AQLBW6130M3NK
C4AQLEW6180M3AK
C4AQLEW6210M3BK
5.9
8.2
9.5
10.9
11.7
12.4
14.6
17.4
19.9
21.3
24.9
27.6
29.9
36.2
23.0
28.7
37.9
42.9
44
36
33
29
29
27
23
20
18
17
15
14
13
11
12
10
8
7
256
234
96
88
72
80
64
58
36
44
36
30
30
24
27
23
18
18
C4AQJBU4330M1WJ
C4AQJBU4560M1XJ
C4AQJBU4700M1YJ
C4AQJBU4880M18J
C4AQJBU5100M11J
C4AQJBU5110M1EJ
C4AQJBU5150M12J
C4AQJBW5250M3FJ
C4AQJBW5300M3JJ
C4AQJBW5330M3HJ
C4AQJBW5400M3LJ
C4AQJBW5450M36J
C4AQJBW5500M3OJ
C4AQJEW5660M3CJ
C4AQJBW5550M3MJ
C4AQJBW5750M3NJ
C4AQJEW6110M3AJ
C4AQJEW6130M3BJ
mΩ
Arms
(°C/W)
ESR
70°C at
10 kHz
Irms*
70°C at
10 kHz
Rth
(HS/Amb)
Packaging
Quantity
PART
NUMBER
VOP70 at 70°C = 800 VDC; VNDC at 85°C = 700 VDC; VOP105 at 105°C = 490 VDC
Cap
Value
(µF)
VDC
Dimensions (mm)
dV/dt
lpkr
17.0
10.7
9.0
7.5
6.8
6.4
5.3
4.3
3.6
3.3
2.8
2.5
2.3
1.8
4.1
3.1
2.2
1.9
(*) Irms value that leads to a ΔT of ≈ 30°C in the hot spot > THS = TAMB + ΔT = 70°C + 30°C = 100°C. Attention: Hot spot at 100°C reduced the life time!
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3125_C4AQ_M • 12/1/2020
9
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AQ Miniaturized, Radial, 2 or 4 Leads, 500 – 1,200 VDC, for DC Link (Automotive Grade)
Table 1 – Ratings & Part Number Reference cont.
Cap
Value VDC
(µF)
Dimensions
(mm)
T
H
L
S
S1
dV/dt Ipkr
ESL
ESR
70°C at
10 kHz
V/µs
nH
mΩ
Apk
Irms*
70°C at
10 kHz
Arms
Rth
(HS/Amb) Packaging
Quantity
(°C/W)
PART
NUMBER
VOP70 at 70°C = 960 VDC; VNDC at 85°C = 800 VDC; VOP105 at 105°C = 560 VDC
2.7
4
5
6.5
8
8.5
12
15
22
24
30
35
40
52
45
60
85
100
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
11
13
14
16
19
18
22
20
28
24
30
35
35
38
30
35
45
45
20
25
28
30
29
33
37
40
37
44
45
46
50
57
45
50
56
65
31.5
31.5
31.5
32
31.5
32
31.5
42
42
41.5
42
42
42
42
57.5
57.5
57.5
57.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
52.5
52.5
52.5
52.5
/
/
/
/
/
/
/
10.2
10.2
10.2
20.3
20.3
20.3
20.3
20.3
20.3
20.3
20.3
65
65
65
65
65
65
65
30
30
30
30
30
30
30
15
15
15
15
175.5
260
325
422.5
520
552.5
780
450
660
720
900
1050
1200
1560
675
900
1275
1500
17
22
24
25
25
27
28
12
10
13
13
13
13
17
13
15
17
19
2
3.5
4.4
5.2
6.3
7
10
14
18
20
25
28
33
40
36
45
65
80
900
900
900
900
900
900
900
900
900
900
900
900
900
900
900
900
900
900
11
13
14
16
19
18
22
20
28
24
30
35
35
38
30
35
45
45
20
25
28
30
29
33
37
40
37
44
45
46
50
57
45
50
56
65
31.5
31.5
31.5
32
31.5
32
31.5
42
42
41.5
42
42
42
42
57.5
57.5
57.5
57.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
52.5
52.5
52.5
52.5
/
/
/
/
/
/
/
10.2
10.2
10.2
20.3
20.3
20.3
20.3
20.3
20.3
20.3
20.3
70
70
70
70
70
70
70
35
35
35
35
35
35
35
15
15
15
15
140
245
308
364
441
490
700
490
630
700
875
980
1155
1400
540
675
975
1200
17
22
24
25
25
27
28
12
10
13
13
13
13
17
13
15
17
19
T
H
L
S
S1
V/µs
Apk
nH
ESL
18.3
12.9
10.7
8.7
7.3
7.1
5.7
6.2
4.3
4.0
3.2
2.8
2.5
2.0
4.4
3.3
2.5
2.2
5.7
7.5
8.7
10.1
11.2
11.8
14.1
14.5
18.2
19.5
23.2
26.1
28.7
34.5
22.3
27.5
35.8
40.6
44
36
33
29
29
27
23
20
18
17
15
14
13
11
12
10
8
7
256
234
96
88
72
80
64
58
36
44
36
30
30
24
27
23
18
18
C4AQIBU4270M1WJ
C4AQIBU4400M1XJ
C4AQIBU4500M1YJ
C4AQIBU4650M18J
C4AQIBU4800M11J
C4AQIBU4850M1EJ
C4AQIBU5120M12J
C4AQIBW5150M3FJ
C4AQIBW5220M3JJ
C4AQIBW5240M3HJ
C4AQIBW5300M3LJ
C4AQIBW5350M36J
C4AQIBW5400M3OJ
C4AQIEW5520M3CJ
C4AQIBW5450M3MJ
C4AQIBW5600M3NJ
C4AQIEW5850M3AJ
C4AQIEW6100M3BJ
5.2
7.4
8.6
9.7
10.6
11.4
13.8
14.8
17.5
18.9
22.4
24.8
27.6
32.4
21.2
25.4
33.5
38.7
44
36
33
29
29
27
23
20
18
17
15
14
13
11
12
10
8
7
256
234
96
88
72
80
64
58
36
44
36
30
30
24
27
23
18
18
C4AQOBU4200M1WJ
C4AQOBU4350M1XJ
C4AQOBU4440M1YJ
C4AQOBU4520M18J
C4AQOBU4630M11J
C4AQOBU4700M1EJ
C4AQOBU5100M12J
C4AQOBW5140M3FJ
C4AQOBW5180M3JJ
C4AQOBW5200M3HJ
C4AQOBW5250M3LJ
C4AQOBW5280M36J
C4AQOBW5330M3OJ
C4AQOEW5400M3CJ
C4AQOBW5360M3MJ
C4AQOBW5450M3NJ
C4AQOEW5650M3AJ
C4AQOEW5800M3BJ
mΩ
Arms
(°C/W)
ESR
70°C at
10 kHz
Irms*
70°C at
10 kHz
Rth
(HS/Amb)
Packaging
Quantity
PART
NUMBER
VOP70 at 70°C = 1,100 VDC; VNDC at 85°C = 900 VDC; VOP105 at 105°C = 650 VDC
Cap
Value
(µF)
VDC
Dimensions (mm)
dV/dt
lpkr
21.9
13.2
10.9
9.5
8.1
7.6
6.0
6.0
4.7
4.3
3.5
3.1
2.7
2.3
4.8
3.9
2.8
2.4
(*) Irms value that leads to a ΔT of ≈ 30°C in the hot spot > THS = TAMB + ΔT = 70°C + 30°C = 100°C. Attention: Hot spot at 100°C reduced the life time!
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3125_C4AQ_M • 12/1/2020
10
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AQ Miniaturized, Radial, 2 or 4 Leads, 500 – 1,200 VDC, for DC Link (Automotive Grade)
Table 1 – Ratings & Part Number Reference cont.
Cap
Value VDC
(µF)
Dimensions
(mm)
T
H
L
S
S1
dV/dt Ipkr
ESL
ESR
70°C at
10 kHz
V/µs
nH
mΩ
Apk
Irms*
70°C at
10 kHz
Arms
Rth
(HS/Amb) Packaging
Quantity
(°C/W)
PART
NUMBER
VOP70 at 70°C = 1,200 VDC; VNDC at 85°C = 1,000 VDC; VOP105 at 105°C = 700 VDC
1.7
2.7
3.3
4
5
5.5
8
12
14
15
20
22
25
33
30
40
55
65
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
11
13
14
16
19
18
22
20
28
24
30
35
35
38
30
35
45
45
20
25
28
30
29
33
37
40
37
44
45
46
50
57
45
50
56
65
31.5
31.5
31.5
32
31.5
32
31.5
42
42
41.5
42
42
42
42
57.5
57.5
57.5
57.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
52.5
52.5
52.5
52.5
/
/
/
/
/
/
/
10.2
10.2
10.2
20.3
20.3
20.3
20.3
20.3
20.3
20.3
20.3
75
75
75
75
75
75
75
37
37
37
37
37
37
37
17
17
17
17
127.5
202.5
247.5
300
375
412.5
600
444
518
555
740
814
925
1221
510
680
935
1105
17
22
24
25
25
27
28
12
10
13
13
13
13
17
13
15
17
19
1.4
2.2
2.7
3.3
4
4.4
6.6
10
12
13
16
18
20
27
24
30
45
55
1,100
1,100
1,100
1,100
1,100
1,100
1,100
1,100
1,100
1,100
1,100
1,100
1,100
1,100
1,100
1,100
1,100
1,100
11
13
14
16
19
18
22
20
28
24
30
35
35
38
30
35
45
45
20
25
28
30
29
33
37
40
37
44
45
46
50
57
45
50
56
65
31.5
31.5
31.5
32
31.5
32
31.5
42
42
41.5
42
42
42
42
57.5
57.5
57.5
57.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
52.5
52.5
52.5
52.5
/
/
/
/
/
/
/
10.2
10.2
10.2
20.3
20.3
20.3
20.3
20.3
20.3
20.3
20.3
80
80
80
80
80
80
80
40
40
40
40
40
40
40
20
20
20
20
112
176
216
264
320
352
528
400
480
520
640
720
800
1080
480
600
900
1100
17
22
24
25
25
27
28
12
10
13
13
13
13
17
13
15
17
19
T
H
L
S
S1
V/µs
Apk
nH
ESL
23.3
15.3
12.9
11.0
9.1
8.5
6.6
6.3
5.4
5.1
3.9
3.6
3.2
2.5
5.2
4.0
3.0
2.6
5.1
6.9
7.9
9.0
10.1
10.8
13.2
14.4
16.3
17.3
21.2
23.3
25.5
31.1
20.4
25.2
32.5
37.0
44
36
33
29
29
27
23
20
18
17
15
14
13
11
12
10
8
7
256
234
96
88
72
80
64
58
36
44
36
30
30
24
27
23
18
18
C4AQNBU4170M1WJ
C4AQNBU4270M1XJ
C4AQNBU4330M1YJ
C4AQNBU4400M18J
C4AQNBU4500M11J
C4AQNBU4550M1EJ
C4AQNBU4800M12J
C4AQNBW5120M3FJ
C4AQNBW5140M3JJ
C4AQNBW5150M3HJ
C4AQNBW5200M3LJ
C4AQNBW5220M36J
C4AQNBW5250M3OJ
C4AQNEW5330M3CJ
C4AQNBW5300M3MJ
C4AQNBW5400M3NJ
C4AQNEW5550M3AJ
C4AQNEW5650M3BJ
4.8
6.5
7.5
8.6
9.5
10.2
12.6
13.8
15.8
16.9
19.9
22.1
24.0
29.6
19.2
23.0
31.0
35.8
44
36
33
29
29
27
23
20
18
17
15
14
13
11
12
10
8
7
256
234
96
88
72
80
64
58
36
44
36
30
30
24
27
23
18
18
C4AQQBU4140M1WJ
C4AQQBU4220M1XJ
C4AQQBU4270M1YJ
C4AQQBU4330M18J
C4AQQBU4400M11J
C4AQQBU4440M1EJ
C4AQQBU4660M12J
C4AQQBW5100M3FJ
C4AQQBW5120M3JJ
C4AQQBW5130M3HJ
C4AQQBW5160M3LJ
C4AQQBW5180M36J
C4AQQBW5200M3OJ
C4AQQEW5270M3CJ
C4AQQBW5240M3MJ
C4AQQBW5300M3NJ
C4AQQEW5450M3AJ
C4AQQEW5550M3BJ
mΩ
Arms
(°C/W)
ESR
70°C at
10 kHz
Irms*
70°C at
10 kHz
Rth
(HS/Amb)
Packaging
Quantity
PART
NUMBER
VOP70 at 70°C = 1,320 VDC; VNDC at 85°C = 1,100 VDC; VOP105 at 105°C = 770 VDC
Cap
Value
(µF)
VDC
Dimensions (mm)
dV/dt
lpkr
25.9
17.1
14.3
12.0
10.2
9.5
7.1
6.9
5.7
5.4
4.4
3.9
3.6
2.8
5.9
4.8
3.3
2.8
(*) Irms value that leads to a ΔT of ≈ 30°C in the hot spot > THS = TAMB + ΔT = 70°C + 30°C = 100°C. Attention: Hot spot at 100°C reduced the life time!
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3125_C4AQ_M • 12/1/2020
11
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AQ Miniaturized, Radial, 2 or 4 Leads, 500 – 1,200 VDC, for DC Link (Automotive Grade)
Table 1 – Ratings & Part Number Reference cont.
Cap
Value VDC
(µF)
Dimensions
(mm)
S1
dV/dt Ipkr
ESL
ESR
70°C at
10 kHz
V/µs
nH
mΩ
Apk
Irms*
70°C at
10 kHz
Arms
Rth
(HS/Amb) Packaging
Quantity
(°C/W)
T
H
L
S
11
13
14
16
19
18
22
20
28
24
30
35
35
38
30
35
45
45
20
25
28
30
29
33
37
40
37
44
45
46
50
57
45
50
56
65
31.5
31.5
31.5
32
31.5
32
31.5
42
42
41.5
42
42
42
42
57.5
57.5
57.5
57.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
52.5
52.5
52.5
52.5
/
/
/
/
/
/
/
10.2
10.2
10.2
20.3
20.3
20.3
20.3
20.3
20.3
20.3
20.3
90
90
90
90
90
90
90
45
45
45
45
45
45
45
23
23
23
23
99
162
198
243
297
333
450
360
450
495
585
675
765
990
460
575
828
1035
17
22
24
25
25
27
28
12
10
13
13
13
13
17
13
15
17
19
29.1
18.5
15.5
13.0
10.9
10.0
8.0
7.7
6.2
5.6
4.8
4.2
3.8
3.0
6.3
5.1
3.7
3.0
4.5
6.3
7.2
8.3
9.2
9.9
11.9
13.1
15.2
16.4
19.0
21.4
23.4
28.4
18.5
22.2
29.3
34.3
44
36
33
29
29
27
23
20
18
17
15
14
13
11
12
10
8
7
T
H
L
S
S1
V/µs
Apk
nH
mΩ
Arms
(°C/W)
dV/dt
lpkr
ESL
ESR
70°C at
10 kHz
Irms*
70°C at
10 kHz
Rth
(HS/Amb)
PART
NUMBER
VOP70 at 70°C = 1,440 VDC; VNDC at 85°C = 1,200 VDC; VOP105 at 105°C = 850 VDC
1.1
1.8
2.2
2.7
3.3
3.7
5
8
10
11
13
15
17
22
20
25
36
45
Cap
Value
(µF)
1,200
1,200
1,200
1,200
1,200
1,200
1,200
1,200
1,200
1,200
1,200
1,200
1,200
1,200
1,200
1,200
1,200
1,200
VDC
Dimensions (mm)
256
234
96
88
72
80
64
58
36
44
36
30
30
24
27
23
18
18
C4AQPBU4110M1WJ
C4AQPBU4180M1XJ
C4AQPBU4220M1YJ
C4AQPBU4270M18J
C4AQPBU4330M11J
C4AQPBU4370M1EJ
C4AQPBU4500M12J
C4AQPBW4800M3FJ
C4AQPBW5100M3JJ
C4AQPBW5110M3HJ
C4AQPBW5130M3LJ
C4AQPBW5150M36J
C4AQPBW5170M3OJ
C4AQPEW5220M3CJ
C4AQPBW5200M3MJ
C4AQPBW5250M3NJ
C4AQPEW5360M3AJ
C4AQPEW5450M3BJ
Packaging
Quantity
PART
NUMBER
(*) Irms value that leads to a ΔT of ≈ 30°C in the hot spot > THS = TAMB + ΔT = 70°C + 30°C = 100°C. Attention: Hot spot at 100°C reduced the life time!
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3125_C4AQ_M • 12/1/2020
12
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AQ Miniaturized, Radial, 2 or 4 Leads, 500 – 1,200 VDC, for DC Link (Automotive Grade)
Table 2 – Ratings & Part Number Reference for Low Profile Design
Cap
Value VDC
(µF)
Dimensions
(mm)
T
H
L
S
S1
dV/dt Ipkr
ESL
ESR
70°C at
10 kHz
V/µs
nH
mΩ
Apk
Irms*
70°C at
10 kHz
Arms
Rth
(HS/Amb) Packaging
Quantity
(°C/W)
PART
NUMBER
VOP70 at 70°C = 600 VDC; VNDC at 85°C = 500 VDC; VOP105 at 105°C = 350 VDC
5.6
8
15
12
16
36
45
500
500
500
500
500
500
500
21
24
31
24
24
35
43
12.5
15
19
15
19
24
25
32
32
32
41.5
41.5
42
42
27.5
27.5
27.5
37.5
37.5
37.5
37.5
/
/
/
10.2
10.2
20.3
20.3
65
65
65
30
30
30
30
364
520
975
360
480
1080
1350
11
13
16
7
8
9
9
3.3
5
10
7.5
10
22
30
700
700
700
700
700
700
700
21
24
31
24
24
35
43
12.5
15
19
15
19
24
25
32
32
32
41.5
41.5
42
42
27.5
27.5
27.5
37.5
37.5
37.5
37.5
2.7
3.8
7.5
6
8
16
22
800
800
800
800
800
800
800
21
24
31
24
24
35
43
12.5
15
19
15
19
24
25
32
32
32
41.5
41.5
42
42
27.5
27.5
27.5
37.5
37.5
37.5
37.5
2
3
6
4.5
6.5
13
18
900
900
900
900
900
900
900
21
24
31
24
24
35
43
12.5
15
19
15
19
24
25
32
32
32
41.5
41.5
42
42
27.5
27.5
27.5
37.5
37.5
37.5
37.5
/
/
/
10.2
10.2
20.3
20.3
70
70
70
35
35
35
35
140
210
420
157.5
227.5
455
630
11
13
16
7
8
9
9
Cap
Value
(µF)
T
H
L
S
S1
V/µs
Apk
nH
VDC
ESL
12.4
9.1
5.5
10.7
8.1
3.7
3.0
6.8
8.6
12.6
8.6
10.5
17.8
21.4
46
39
30
33
29
23
19
192
168
80
132
88
60
48
C4AQLLU4560M11K
C4AQLLU4800M12K
C4AQLLU5150M19K
C4AQLLW5120M34K
C4AQLLW5160M33K
C4AQLLW5360M36K
C4AQLLW5450M38K
46
39
30
33
29
23
19
192
168
80
132
88
60
48
C4AQJLU4330M11J
C4AQJLU4500M12J
C4AQJLU5100M19J
C4AQJLW4750M34J
C4AQJLW5100M33J
C4AQJLW5220M36J
C4AQJLW5300M38J
46
39
30
33
29
23
19
192
168
80
132
88
60
48
C4AQILU4270M11J
C4AQILU4380M12J
C4AQILU4750M19J
C4AQILW4600M34J
C4AQILW4800M33J
C4AQILW5160M36J
C4AQILW5220M38J
5.1
6.7
10.4
6.6
8.5
13.5
17.2
46
39
30
33
29
23
19
192
168
80
132
88
60
48
C4AQOLU4200M11J
C4AQOLU4300M12J
C4AQOLU4600M19J
C4AQOLW4450M34J
C4AQOLW4650M33J
C4AQOLW5130M36J
C4AQOLW5180M38J
mΩ
Arms
(°C/W)
ESR
70°C at
10 kHz
Irms*
70°C at
10 kHz
Rth
(HS/Amb)
Packaging
Quantity
PART
NUMBER
VOP70 at 70°C = 800 VDC; VNDC at 85°C = 700 VDC; VOP105 at 105°C = 490 VDC
/
/
/
10.2
10.2
20.3
20.3
65
65
65
30
30
30
30
214.5
325
650
225
300
660
900
11
13
16
7
8
9
9
16.8
11.5
6.4
13.8
10.4
4.8
3.6
5.8
7.7
11.7
7.6
9.3
15.5
19.5
VOP70 at 70°C = 960 VDC; VNDC at 85°C = 800 VDC; VOP105 at 105°C = 560 VDC
/
/
/
10.2
10.2
20.3
20.3
65
65
65
30
30
30
30
175.5
247
487.5
180
240
480
660
11
13
16
7
8
9
9
18.0
13.2
7.3
15.1
11.4
5.8
4.3
5.6
7.1
10.9
7.2
8.9
14.2
17.9
VOP70 at 70°C = 1,100 VDC; VNDC at 85°C = 900 VDC; VOP105 at 105°C = 650 VDC
Dimensions (mm)
dV/dt
lpkr
21.6
14.8
8.1
18.0
12.5
6.3
4.6
(*) Irms value that leads to a ΔT of ≈ 30°C in the hot spot > THS = TAMB + ΔT = 70°C + 30°C = 100°C. Attention: Hot spot at 100°C reduced the life time!
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3125_C4AQ_M • 12/1/2020
13
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AQ Miniaturized, Radial, 2 or 4 Leads, 500 – 1,200 VDC, for DC Link (Automotive Grade)
Table 2 – Ratings & Part Number Reference for Low Profile Design cont.
Cap
Value VDC
(µF)
Dimensions
(mm)
T
H
L
S
S1
dV/dt Ipkr
ESL
ESR
70°C at
10 kHz
V/µs
nH
mΩ
Apk
Irms*
70°C at
10 kHz
Arms
Rth
(HS/Amb) Packaging
Quantity
(°C/W)
PART
NUMBER
VOP70 at 70°C = 1,200 VDC; VNDC at 85°C = 1,000 VDC; VOP105 at 105°C = 700 VDC
1.7
2.5
4.8
3.8
5
10
15
1000
1000
1000
1000
1000
1000
1000
21
24
31
24
24
35
43
12.5
15
19
15
19
24
25
32
32
32
41.5
41.5
42
42
27.5
27.5
27.5
37.5
37.5
37.5
37.5
/
/
/
10.2
10.2
20.3
20.3
75
75
75
37
37
37
37
127.5
187.5
360
140.6
185
370
555
11
13
16
7
8
9
9
23.0
16.1
9.0
19.3
14.7
7.4
5.0
1.4
2.1
4
3
4.4
8.5
12
1100
1100
1100
1100
1100
1100
1100
21
24
31
24
24
35
43
12.5
15
19
15
19
24
25
32
32
32
41.5
41.5
42
42
27.5
27.5
27.5
37.5
37.5
37.5
37.5
1.1
1.7
3.3
2.5
3.5
7.2
10
1200
1200
1200
1200
1200
1200
1200
21
24
31
24
24
35
43
12.5
15
19
15
19
24
25
32
32
32
41.5
41.5
42
42
27.5
27.5
27.5
37.5
37.5
37.5
37.5
/
/
/
10.2
10.2
20.3
20.3
90
90
90
45
45
45
45
99
153
297
112.5
157.5
324
450
11
13
16
7
8
9
9
28.9
19.1
10.5
23.9
17.1
8.4
6.1
T
H
L
S
S1
V/µs
Apk
nH
dV/dt
lpkr
ESL
5.0
6.5
9.8
6.4
7.8
12.5
16.5
46
39
30
33
29
23
19
192
168
80
132
88
60
48
C4AQNLU4170M11J
C4AQNLU4250M12J
C4AQNLU4480M19J
C4AQNLW4380M34J
C4AQNLW4500M33J
C4AQNLW5100M36J
C4AQNLW5150M38J
46
39
30
33
29
23
19
192
168
80
132
88
60
48
C4AQQLU4140M11J
C4AQQLU4210M12J
C4AQQLU4400M19J
C4AQQLW4300M34J
C4AQQLW4440M33J
C4AQQLW4850M36J
C4AQQLW5120M38J
4.4
5.9
9.1
5.7
7.2
11.7
14.9
46
39
30
33
29
23
19
192
168
80
132
88
60
48
C4AQPLU4110M11J
C4AQPLU4170M12J
C4AQPLU4330M19J
C4AQPLW4250M34J
C4AQPLW4350M33J
C4AQPLW4720M36J
C4AQPLW5100M38J
mΩ
Arms
(°C/W)
ESR
70°C at
10 kHz
Irms*
70°C at
10 kHz
Rth
(HS/Amb)
Packaging
Quantity
PART
NUMBER
VOP70 at 70°C = 1,320 VDC; VNDC at 85°C = 1,100 VDC; VOP105 at 105°C = 770 VDC
/
/
/
10.2
10.2
20.3
20.3
80
80
80
40
40
40
40
112
168
320
120
176
340
480
11
13
16
7
8
9
9
25.6
17.5
9.8
22.3
15.2
8.0
5.7
4.7
6.2
9.4
6.0
7.7
12.1
15.5
VOP70 at 70°C = 1,440 VDC; VNDC at 85°C = 1,200 VDC; VOP105 at 105°C = 850 VDC
Cap
Value
(µF)
VDC
Dimensions (mm)
(*) Irms value that leads to a ΔT of ≈ 30°C in the hot spot > THS = TAMB + ΔT = 70°C + 30°C = 100°C. Attention: Hot spot at 100°C reduced the life time!
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3125_C4AQ_M • 12/1/2020
14
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AQ Miniaturized, Radial, 2 or 4 Leads, 500 – 1,200 VDC, for DC Link (Automotive Grade)
Soldering Process
The implementation of the RoHS directive has resulted in the selection of SnAuCu (SAC) alloys, or SnCu alloys, as the primary
solder material. This has increased the liquidus temperature from 183°C for a SnPb eutectic alloy to 217 – 221°C for new alloys.
As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and
wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170°C).
Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 – 15 mm),
and great care must be taken during soldering. The recommended solder profiles from KEMET should be used. Contact KEMET
with any questions. In general, the wave soldering curve from IEC Publication 61760–1 Edition 2 serves as a solid guideline for
successful soldering. See Figure 1.
Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the
recommended limits may result in degradation or permanent damage to the capacitors.
Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert
through-hole parts after curing the surface mount parts. Contact KEMET to discuss the actual temperature profile in the oven, if
through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended.
Allow time for the capacitor surface temperature to return to normal before the second soldering cycle.
Wave Soldering Recommendations
Manual Soldering Recommendations
300
Following is the recommendation for manual
soldering with a soldering iron.
2+3 seconds max
260°C
250
Second Wave
First Wave
Recommended Soldering Temperature
Temperature (°C)
200
400
Soldering Iron Bit Temperature (°C)
350
300
∆ T < 150°C
Cooling
Preheating
150
ca. 2°C/second
ca. 3.5°C/second typical
ca. 5°C/second
Tpreheat
100
Typical
250
50
200
150
0
100
0
40
80
120
160
200
240
Time (seconds)
50
0
0
1
2
3
4
5
6
7
8
Soldering Time (seconds)
The soldering iron tip temperature should
be set at 350°C (+10°C maximum) with the
soldering duration not to exceed more than 3
seconds.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3125_C4AQ_M • 12/1/2020
15
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AQ Miniaturized, Radial, 2 or 4 Leads, 500 – 1,200 VDC, for DC Link (Automotive Grade)
Soldering Process cont.
Wave Soldering Recommendations cont.
1. The tables indicates the maximum set-up temperature of the soldering process
Dielectric Film
Material
Maximum Preheat
Temperature
Maximum
Peak Soldering
Temperature
Capacitor
Pitch
≤ 15 mm
Capacitor
Pitch
> 15 mm
Capacitor
Pitch
≤ 15 mm
Capacitor
Pitch
> 15 mm
Polyester
130°C
130°C
270°C
270°C
Polypropylene
110°C
130°C
260°C
270°C
Paper
130°C
140°C
270°C
270°C
Polyphenylene
Sulphide
150°C
160°C
270°C
270°C
2. The maximum temperature measured inside the capacitor: set the temperature so that inside the element the maximum
temperature is below the limit.
Dielectric Film Material
Maximum Temperature
Measured Inside the Element
Polyester
160°C
Polypropylene
110°C
Paper
160°C
Polyphenylene Sulphide
160°C
Temperature monitored inside the capacitor.
Selective Soldering Recommendations
Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole
components to be soldered is pre-heated and transported over the solder bath, as in normal flow soldering, without touching
the solder. When the board is over the bath, it is stopped. Pre-designed solder pots are lifted from the bath with molten
solder, only at the places of the selected components, and pressed against the lower surface of the board to solder the
components.
The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document.
However, instead of two baths, there is only one with a time from 3 – 10 seconds. In selective soldering, the risk of
overheating is greater than in double wave flow soldering, and great care must be taken so that the parts do not overheat.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3125_C4AQ_M • 12/1/2020
16
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AQ Miniaturized, Radial, 2 or 4 Leads, 500 – 1,200 VDC, for DC Link (Automotive Grade)
Mounting
Resistance to Vibration and Mechanical Shock
AEC-Q200 Mechanical Stress Tests:
Mechanical Shock
Vibration
MIL-SDT-202 Method 213
Test condition C
Peak value 100 g, duration 6 ms, half-sine-wave
(see MIL-HDBK for details)
MIL-SDT-202 Method 204
5 g for 20 minutes, 12 cycles each of 3 orientations
Use 8"X5" PCB, .031" thick. 7 secure points on one
8" side and 2 secure points at corners of opposite
sides. Parts mounted within 2" from any secure point.
Test from 10 – 2,000 Hz.
The capacitors are designed for PCB mounting.
The stand-off pipes must be in good contact with the printed circuit board.
The capacitor body has to be properly fixed (e.g. clamped or glued).
Construction
Single-sided Metallized
Polypropylene Film
(First Layer)
Molded Plastic
Case
Detailed Cross Section
Molded Plastic
Case
Self-Extinguishing Resin
Single-sided Metallized
Polypropylene Film
(Second Layer)
Margin
Margin
Metal
Contact
Layer
Metal
Contact
Layer
Margin
Leads
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3125_C4AQ_M • 12/1/2020
17
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AQ Miniaturized, Radial, 2 or 4 Leads, 500 – 1,200 VDC, for DC Link (Automotive Grade)
Construction cont.
Low Profile Version:
Winding Scheme:
Single-sided
Metallized
Polypropylene
Film
Marking
Dielectric Type, Series
Manufacturing
Logo
Capacitance, Tolerance
Rated Voltage
Climatic Category
(Temperature - Minimum/Maximum)
Self-Healing
Dielectric
Date Code
Internal Use
Manufacturing Date Code (IEC–60062)
Year
Code
Year
Code
Year
Code
Month
Code
Month
Code
2010
2011
2012
2013
2014
2015
2016
A
B
C
D
E
F
H
2017
2018
2019
2020
2021
2022
2023
J
K
L
M
N
P
R
2024
2025
2026
2027
2028
2029
2030
S
T
U
V
W
X
A
January
February
March
April
May
June
1
2
3
4
5
6
July
August
September
October
November
December
7
8
9
O
N
D
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3125_C4AQ_M • 12/1/2020
18
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AQ Miniaturized, Radial, 2 or 4 Leads, 500 – 1,200 VDC, for DC Link (Automotive Grade)
KEMET Electronics Corporation Sales Offices
For a complete list of our global sales offi ces, please visit www.kemet.com/sales.
Disclaimer
All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes
no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury
or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3125_C4AQ_M • 12/1/2020
19
工商网监
湘ICP备2023018690号
