C4AQLBW6100A3MK

Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Overview Applications The C4AQ capacitor is a polypropylene metallized film capacitor with a rectangular, plastic box-type design (white or grey in color) filled with resin, and uses 2 or 4 tinned wires. Typical applications include DC filtering, DC link, power electronics, energy storage, renewable energy grid interface, motor drives, and automotive applications. Automotive grade devices meet the demanding Automotive Electronics Council's AEC-Q200 qualification requirements. Benefits • Self-healing • Low loss • Low ESL • Low profile dimensions available • High ripple current • High capacitance density • High contact reliability • Suitable for high frequency applications • Automotive Grades (AEC-Q200) Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality Part Number System C4 A Q U B W 5270 Series Type Application Rated Voltage (VDC) Case Terminals Code Capacitance Code (pF) C4 = MKP Power Capacitors A= Box, wire terminals Q= DC Link Automotive Grade U = 2 pins W = 4 pins Digits two – four indicate the first three digits of the capacitance value. First digit indicates the number of zeros to be added. L = 500 C = 650 I = 800 Q = 1,100 U = 1,300 S = 1,500 B, E = Box plastic case L = Low Profile box plastic case A 3 Lead Release Diameter (mm) A= Standard B–Z= Special 1 = 0.8 2 = 1.0 3 = 1.2 N J Size Code Tolerance See dimensions table below for valid case sizes J = 5% K = 10% One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3114_C4AQ • 7/29/2020 1 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Dimensions – Millimeters T T L H S 0.5 LL F 0.5 S1 p p p1 2-pin 4-pin Size Code S S1 Digit 6 Digit 14 Nominal Tolerance Nominal B W 27.5 ±0.4 - T Tolerance Nominal - 11.0 H L LL F Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance +0.3/−0.7 20.0 +0.2/−0.7 31.5 +0.5/−0.7 6 +0/−2 0.8 ±0.05 B X 27.5 ±0.4 - - 13.0 +0.3/−0.7 25.0 +0.2/−0.7 31.5 +0.5/−0.7 6 +0/−2 0.8 ±0.05 B Y 27.5 ±0.4 - - 14.0 +0.3/−0.7 28.0 +0.2/−0.7 31.5 +0.5/−0.7 6 +0/−2 0.8 ±0.05 B 1 27.5 ±0.4 - - 19.0 +0.3/−0.7 29.0 +0.2/−0.7 31.5 +0.5/−0.7 6 +0/−2 0.8 ±0.05 B 2 27.5 ±0.4 - - 22.0 +0.3/−0.7 37.0 +0.2/−0.7 31.5 +0.5/−0.7 6 +0/−2 0.8 ±0.05 B F 37.5 ±0.4 5.1/10.2 ±0.4 20.0 +0.4/−0.7 40.0 +0.2/−0.7 42.0 +0.6/−0.7 6 +0/−2 1.2 ±0.05 B J 37.5 ±0.4 10.2 ±0.4 28.0 +0.4/−0.7 37.0 +0.2/−0.7 42.0 +0.6/−0.7 6 +0/−2 1.2 ±0.05 B L 37.5 ±0.4 20.3 ±0.4 30.0 +0.4/−0.7 45.0 +0.2/−0.7 42.0 +0.6/−0.7 6 +0/−2 1.2 ±0.05 B O 37.5 ±0.4 20.3 ±0.4 35.0 +0.4/−0.7 50.0 +0.2/−0.7 42.0 +0.6/−0.7 6 +0/−2 1.2 ±0.05 B M 52.5 ±0.4 20.3 ±0.4 30.0 +0.5/−0.7 45.0 +0.3/−0.7 57.5 +0.8/−0.7 6 +0/−2 1.2 ±0.05 B N 52.5 ±0.4 20.3 ±0.4 35.0 +0.5/−0.7 50.0 +0.3/−0.7 57.5 +0.8/−0.7 6 +0/−2 1.2 ±0.05 E A 52.5 ±0.4 20.3 ±0.4 45.0 +0.5/−0.7 56.0 +0.3/−0.7 57.5 +0.8/−0.7 6 +0/−2 1.2 ±0.05 E B 52.5 ±0.4 20.3 ±0.4 45.0 +0.5/−0.7 65.0 +0.3/−0.7 57.5 +0.8/−0.7 6 +0/−2 1.2 ±0.05 L 1 27.7 ±0.4 - - 21.0 +0.3/−0.7 12.5 +0.2/−0.7 32.0 +0.5/−0.7 6 +0/−2 0.8 ±0.05 L 2 27.5 ±0.4 - - 24.0 +0.3/−0.7 15.0 +0.2/−0.7 32.0 +0.5/−0.7 6 +0/−2 0.8 ±0.05 L 3 37.5 ±0.4 10.2 ±0.4 24.0 +0.4/−0.7 19.0 +0.2/−0.7 41.5 +0.6/−0.7 6 +0/−2 1.2 ±0.05 L 4 37.5 ±0.4 10.2 ±0.4 24.0 +0.4/−0.7 15.0 +0.2/−0.7 41.5 +0.6/−0.7 6 +0/−2 1.2 ±0.05 L 6 37.5 ±0.4 20.3 ±0.4 35.0 +0.4/−0.7 24.0 +0.2/−0.7 42.0 +0.6/−0.7 6 +0/−2 1.2 ±0.05 L 8 37.5 ±0.4 20.3 ±0.4 43.0 +0.4/−0.7 25.0 +0.2/−0.7 42.0 +0.6/−0.7 6 +0/−2 1.2 ±0.05 L 9 27.5 ±0.4 - - 31.0 +0.3/−0.7 19.0 +0.2/−0.7 32.0 +0.5/−0.7 6 +0/−2 0.8 ±0.05 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3114_C4AQ • 7/29/2020 2 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Qualification Reference Standards Climatic Category IEC 61071, EN 61071, VDE0560 55/105/56 according to IEC 60068-1 Automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AEC-Q200, Stress Test Qualification for Passive Components. For additional information regarding the Automotive Electronics Council and AEC-Q200, visit the AEC website at www.aecouncil.com. General Technical Data Dielectric Application Special Features Climatic Category Temperature Range Polypropylene metallized film, non-inductive type, self-healing property DC filtering, DC link AEC–Q200 qualified 55/105/56 IEC 60068–1 −55°C to +105°C 500 hours + 500 hours at 1.3 x VNDC at 70°C Endurance Test 500 hours + 500 hours at 1.3 x VOP85 at 85°C 500 hours + 500 hours at 1.3 x VOP105 at 105°C Standard Protection Installation Leads Packaging RoHS Compliance IEC 61071, EN 61071, VDE0560, AEC–Q200 Solvent resistant plastic case UL 94 V–0 compliant Thermosetting resin sealing UL 94 V–0 compliant Any position Tinned copper wires - standard lead wire length 6 (+0/−2) mm Packed in cardboard trays with protection for the terminals Compliant with Directive 2002/95/EC and Directive 2011/65/EU of the European Parliament and the Council of the EU on 8 June 2011, including the Commission Delegated Directive (EU) 2015/863 that amended Annex II to Directive 2011/65/EU. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3114_C4AQ • 7/29/2020 3 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Electrical Characteristics Rated Capacitance Range Rated Voltage (VNDC) Range Capacitance Tolerance Dissipation Factor PP Typical (tgδ0) Surge Voltage Overvoltage (IEC 61071) Peak Non-Repetitive Current Insulation Resistance Capacitance Deviation in Operation Temperature Storage Storage time Permissible Relative Humidity - Storage 1 to 210 µF 500 to 1,500 VDC ±5% (J) or ±10% (K) measured at T = +25°C ±5°C ≤ 0.0002 at 10 kHz with T = 25°C ±5°C 1.5 * VNDC for maximum 10 times in a lifetime at 25°C ±5°C 1.15 * VNDC for maximum 30 minutes, once per day 1.3 * VNDC for maximum 1 minute, once per day 1.5 * IPKR for maximum 1,000 times in a lifetime IR x C ≥ 30.000 seconds at 100 VDC 1 minute at T = +25°C ±5°C ±2.0% maximum on capacitance value measured at T = +25°C ±5°C −40 to +80°C ≤ 36 months from the date marked on the label glued to the package Annual average ≤ 70%, 85% on 30 days/year randomly distributed throughout year. Dewing not admissible. Life Expectancy 100,000 hours at VNDC at hot spot temperature THS = +70°C 100,000 hours at VOP85 at hot spot temperature THS = +85°C Life Expectancy 10,000 hours at VOP105 at hot spot temperature THS = +105°C 500 hours at 0.7 × VOP85 at hot spot temperature THS = +115°C 200 hours at 0.6 × VOP85 at hot spot temperature THS = +125°C Capacitance Drop at End of Life Failure Rate IEC 61709 −5% (typical) ≤ 200 FIT at VOP85 at hot spot temperature THS = +85°C ≤ 130 FIT at VNDC at hot spot temperature THS = +70°C © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3114_C4AQ • 7/29/2020 4 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Test Method Test Voltage Between Terminals 1.5 * VNDC for 10 seconds or 1.65 * VNDC for 2 seconds, at T = +25°C ±5°C Test Voltage Between Terminals and Case 3.2 k VAC 50 Hz for 2 seconds Damp Heat IEC 60068-2-78 Change of Temperature IEC 60068-2-14 Biased Humidity Test 40°C/93% R.H. at VNDC - 1,000 hours |ΔC/C 0 | ≤ 5% |ΔDF/DF0 | ≤ 200% (at 10 kHz) IR ≥ 50% of initial limit Biased Humidity Test 60°C/95% R.H. at VNDC - 1,000 hours |ΔC/C 0 | ≤ 5% |ΔDF/DF0 | ≤ 200% (at 10 kHz) IR ≥ 100 MΩ Operative Voltage Derating Symbol Life Expectancy (Hours) Voltage (VDC) Rated Voltage at 70°C (THS) VNDC 500 650 800 1,100 1,300 1,500 100,000 Operating Voltage at 85°C (THS) VOP85 450 600 700 900 1,100 1,200 100,000 Operating Voltage at 105°C (THS) VOP105 350 450 550 700 850 900 10,000 Maximum Overtemperature ∆Tlim vs TAMB Maximum Irms vs. TAMB 120% 30 100% Temperature TAMB(°C) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 115 105 110 95 100 90 85 80 75 70 65 0% 60 0 25 20% 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 5 55 40% 50 10 60% 45 15 80% 40 20 35 Maximum Irms ∆Tlim (°C) 25 30 35 Temperature TAMB(°C) F3114_C4AQ • 7/29/2020 5 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Typical Waveforms VNDC / VPK+ V VPK- t VNDC / VPK+ VPK- V t VNDC / VPK+ VPK- V t The applied peak-to-peak ripple voltage shall not exceed 0.1 x VNDC . The peak voltage shall not exceed the rated voltage VNDC . © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3114_C4AQ • 7/29/2020 6 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Life Expectancy/Failure Quota Graphs Lifetime Curve at Hot Spot Temperature - VNDC = 500 VDC 1,000,000 Lifetime Expectancy (h) 100,000 10,000 1,000 125 °C 115 °C 110°C 105 °C 95 °C 85 °C 70 °C 100 10 200 300 400 500 600 Voltage (V) Lifetime Curve at Hot Spot Temperature - VNDC = 650 VDC 1,000,000 Lifetime Expectancy (h) 100,000 10,000 1,000 125 °C 115 °C 110°C 105 °C 95 °C 85 °C 70 °C 100 10 300 400 500 600 700 800 Voltage (V) Notes: THS = TAMB + ΔT ΔT = ESR * Irms2 * Rth Irms should be limited to values granting ΔT ≤ 30°C © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3114_C4AQ • 7/29/2020 7 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Life Expectancy/Failure Quota Graphs cont. Lifetime Curve at Hot Spot Temperature - VNDC = 800 VDC 1,000,000 Lifetime Expectancy (h) 100,000 10,000 1,000 125 °C 115 °C 110°C 105 °C 95 °C 85 °C 70 °C 100 10 300 400 500 600 700 800 900 1,000 Voltage (V) Lifetime Curve at Hot Spot Temperature - VNDC = 1100 VDC 1,000,000 Lifetime Expectancy (h) 100,000 10,000 1,000 125 °C 115 °C 110°C 105 °C 95 °C 85 °C 70 °C 100 10 400 500 600 700 800 900 1,000 1,100 1,200 1,300 Voltage (V) Notes: THS = TAMB + ΔT ΔT = ESR * Irms2 * Rth Irms should be limited to values granting ΔT ≤ 30°C © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3114_C4AQ • 7/29/2020 8 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Life Expectancy/Failure Quota Graphs cont. Lifetime Curve at Hot Spot Temperature - VNDC = 1300 VDC 1,000,000 Lifetime Expectancy (h) 100,000 10,000 1,000 125 °C 115 °C 110°C 105 °C 95 °C 85 °C 70 °C 100 10 500 600 700 800 900 1,000 1,100 1,200 1,300 1,400 1,500 Voltage (V) Lifetime Curve at Hot Spot Temperature - VNDC = 1500 VDC 1,000,000 Lifetime Expectancy (h) 100,000 10,000 1,000 125 °C 115 °C 110°C 105 °C 95 °C 85 °C 70 °C 100 10 600 700 800 900 1,000 1,100 1,200 1,300 1,400 1,500 1,600 1,700 Voltage (V) Notes: THS = TAMB + ΔT ΔT = ESR * Irms2 * Rth Irms should be limited to values granting ΔT ≤ 30°C © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3114_C4AQ • 7/29/2020 9 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Life Expectancy/Failure Quota Graphs cont. FIT at Hot Spot Temperature - VNDC = 500 VDC 100,000 FIT (10-9/h) 10,000 1,000 100 125°C FIT 120°C FIT 110°C FIT 105 °C FIT 95 °C FIT 85 °C FIT 70 °C FIT 10 1 200 300 400 500 600 Voltage (V) FIT at Hot Spot Temperature - VNDC = 650 VDC 100,000 FIT (10-9/h) 10,000 1,000 100 125°C FIT 120°C FIT 110°C FIT 105 °C FIT 95 °C FIT 85 °C FIT 70 °C FIT 10 1 300 400 500 600 700 800 Voltage (V) Notes: FIT data based on IEC 61709 standard. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3114_C4AQ • 7/29/2020 10 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Life Expectancy/Failure Quota Graphs cont. FIT at Hot Spot Temperature - VNDC = 800 VDC 100,000 FIT (10-9/h) 10,000 1,000 100 125°C FIT 120°C FIT 110°C FIT 105 °C FIT 95 °C FIT 85 °C FIT 70 °C FIT 10 1 300 400 500 600 700 800 900 1,000 Voltage (V) FIT at Hot Spot Temperature - VNDC = 1100 VDC 100,000 FIT (10-9/h) 10,000 1,000 100 125°C FIT 120°C FIT 110°C FIT 105 °C FIT 95 °C FIT 85 °C FIT 70 °C FIT 10 1 400 500 600 700 800 900 1,000 1,100 1,200 1,300 Voltage (V) Notes: FIT data based on IEC 61709 standard. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3114_C4AQ • 7/29/2020 11 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Life Expectancy/Failure Quota Graphs cont. FIT at Hot Spot Temperature - VNDC = 1300 VDC 100,000 FIT (10-9/h) 10,000 1,000 100 125°C FIT 120°C FIT 110°C FIT 105 °C FIT 95 °C FIT 85 °C FIT 70 °C FIT 10 1 500 600 700 800 900 1,000 1,100 1,200 1,300 1,400 1,500 Voltage (V) FIT at Hot Spot Temperature - VNDC = 1500 VDC 100,000 FIT (10-9/h) 10,000 1,000 100 125°C FIT 120°C FIT 110°C FIT 105 °C FIT 95 °C FIT 85 °C FIT 70 °C FIT 10 1 600 700 800 900 1,000 1,100 1,200 1,300 1,400 1,500 1,600 1,700 Voltage (V) Notes: FIT data based on IEC 61709 standard. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3114_C4AQ • 7/29/2020 12 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Environmental Compliance As a leading global supplier of electronic components and an environmentally conscious company, KEMET continually aspires to improve the environmental effects of our manufacturing processes and our finished electronic components. In Europe (RoHS Directive) and in some other geographical areas such as China (China RoHS), legislation has been enacted to prevent or otherwise limit the use of certain hazardous materials, including lead (Pb), in electronic equipment. KEMET monitors legislation globally to ensure compliance and endeavors to adjust our manufacturing processes and/or electronic components as may be required by applicable law. For military, medical, automotive, and some commercial applications, the use of lead (Pb) in the termination is necessary and/or required by design. KEMET is committed to communicating RoHS compliance to our customers. Information related to RoHS compliance will be provided in data sheets and using specific identifiers on the packaging labels. All KEMET power film capacitors are RoHS compliant. Materials & Environment The selection of raw materials that KEMET uses for the production of its electronic components is the result of extensive experience. KEMET directs specific attention toward environmental protection. KEMET selects its suppliers according to ISO 9001 standards and performs statistical analyses on raw materials before acceptance for use in manufacturing our electronic components. All materials are, to the best of KEMET’s knowledge, non-toxic and free from cadmium; mercury; chrome and compounds; polychlorine triphenyl (PCB); bromide and chlorinedioxins bromurate clorurate; CFC and HCFC; and asbestos. Dissipation Factor Dissipation factor is a complex function involved with capacitor inefficiency. The tgδ may vary up and down with increased temperature. For more information, refer to Performance Characteristics. Sealing Hermetically Sealed Capacitors As the temperature increases, the pressure inside the capacitor increases. If the internal pressure is high enough, it can cause a breach in the capacitor. Such a breach can result in leakage, impregnation, filling fluid, or moisture susceptibility. Barometric Pressure The altitude at which hermetically sealed capacitors are operated controls the capacitor's voltage rating. As the barometric pressure decreases, the susceptibility to terminal arc-over increases. Non-hermetic capacitors can be affected by internal stresses due to pressure changes. These effects can be in the form of capacitance changes, dielectric arc-over, and/or low insulation resistance. Altitude can also affect heat transfer. Heat that is generated in an operation cannot be dissipated properly, and high RI2 losses and eventual failure can result. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3114_C4AQ • 7/29/2020 13 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Table 1 – Ratings & Part Number Reference Cap Value VDC (µF) Dimensions (mm) T H L S S1 dV/dt Ipkr ESL ESR 70°C at 10 kHz V/µs nH mΩ Apk Irms* 70°C at 10 kHz Arms Rth (HS/Amb) Packaging Quantity (°C/W) PART NUMBER VNDC at 70°C = 500 VDC; VOP85 at 85°C = 450 VDC; VOP105 at 105°C = 350 VDC 5.6 10 12.5 15 25 40 50 70 90 100 130 170 210 500 500 500 500 500 500 500 500 500 500 500 500 500 11 13 14 19 22 20 28 30 35 30 35 45 45 20 25 28 29 37 40 37 45 50 45 50 56 65 31.5 31.5 31.5 31.5 31.5 42 42 42 42 57.5 57.5 57.5 57.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 52.5 52.5 52.5 52.5 \ \ \ \ \ 10.2 10.2 20.3 20.3 20.3 20.3 20.3 20.3 10 10 10 10 10 7 7 7 7 4 4 4 4 54 96 122 147 245 262 332 464 585 442 581 780 840 17 22 24 25 28 12 10 13 14 13 15 17 19 12.7 7.8 6.7 5.8 4.4 3.4 2.8 2.1 1.7 2.9 2.3 1.8 1.6 3.3 5.6 7 10 15 20 30 40 50 55 75 110 130 650 650 650 650 650 650 650 650 650 650 650 650 650 11 13 14 19 22 20 28 30 35 30 35 45 45 20 25 28 29 37 40 37 45 50 45 50 56 65 31.5 31.5 31.5 31.5 31.5 42 42 42 42 57.5 57.5 57.5 57.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 52.5 52.5 52.5 52.5 2.7 4 5 8 12.5 15 20 15 30 40 45 55 60 85 100 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 11 13 14 19 22 20 28 20 30 35 30 35 35 45 45 20 25 28 29 37 40 37 40 45 50 45 50 50 56 65 31.5 31.5 31.5 31.5 31.5 42 42 42 42 42 57.5 57.5 57.5 57.5 57.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 52.5 52.5 52.5 52.5 52.5 \ \ \ \ \ 5.1 10.2 10.2 20.3 20.3 20.3 20.3 20.3 20.3 20.3 19 19 19 19 19 13 13 13 13 13 9 9 9 9 9 51 77 96 154 241 196 262 196 389 524 389 485 530 728 883 17 22 24 25 28 12 10 12 13 14 13 15 15 17 19 18.3 12.9 10.7 7.3 5.5 6.2 4.7 6.2 3.2 2.5 4.4 3.6 3.3 2.5 2.2 T H L S S1 V/µs Apk nH dV/dt lpkr ESL 6.8 9.6 11.0 12.6 12.6 19.6 22.8 29.1 35.1 27.4 33.3 41.6 47.7 44 36 33 29 23 20 18 15 13 12 10 8 7 256 234 96 72 64 58 36 36 30 27 23 18 18 C4AQLBU4560A1WK C4AQLBU5100A1XK C4AQLBU5125A1YK C4AQLBU5150A11K C4AQLBU5250A12K C4AQLBW5400A3FK C4AQLBW5500A3JK C4AQLBW5700A3LK C4AQLBW5900A3OK C4AQLBW6100A3MK C4AQLBW6130A3NK C4AQLEW6170A3AK C4AQLEW6210A3BK 44 36 33 29 23 20 18 15 13 12 10 8 7 256 234 96 72 64 58 36 36 30 27 23 18 18 C4AQCBU4330A1WJ C4AQCBU4560A1XJ C4AQCBU4700A1YJ C4AQCBU5100A11J C4AQCBU5150A12J C4AQCBW5200A3FJ C4AQCBW5300A3JJ C4AQCBW5400A3LJ C4AQCBW5500A3OJ C4AQCBW5550A3MJ C4AQCBW5750A3NJ C4AQCEW6110A3AJ C4AQCEW6130A3BJ 5.7 7.5 8.7 11.2 12.6 14.5 17.4 14.5 23.2 28.7 22.3 26.4 27.5 35.8 40.6 44 36 33 29 23 20 18 20 15 13 12 10 10 8 7 256 234 96 72 64 58 36 58 36 30 27 23 23 18 18 C4AQIBU4270A1WJ C4AQIBU4400A1XJ C4AQIBU4500A1YJ C4AQIBU4800A11J C4AQIBU5125A12J C4AQIBW5150A3FJ C4AQIBW5200A3JJ C4AQIBW5150B3FJ C4AQIBW5300A3LJ C4AQIBW5400A3OJ C4AQIBW5450A3MJ C4AQIBW5550A3NJ C4AQIBW5600A3NJ C4AQIEW5850A3AJ C4AQIEW6100A3BJ mΩ Arms (°C/W) ESR 70°C at 10 kHz Irms* 70°C at 10 kHz Rth (HS/Amb) Packaging Quantity PART NUMBER VNDC at 70°C = 650 VDC; VOP85 at 85°C = 600 VDC; VOP105 at 105°C = 450 VDC \ \ \ \ \ 10.2 10.2 20.3 20.3 20.3 20.3 20.3 20.3 13 13 13 13 13 9 9 9 9 6 6 6 6 41 71 88 127 190 172 255 344 430 319 435 625 754 17 22 24 25 28 12 10 13 14 13 15 17 19 17.0 10.7 9.0 6.8 5.3 5.3 3.6 2.8 2.3 4.1 3.1 2.2 1.9 5.9 8.2 9.5 11.7 12.6 15.6 19.9 24.9 29.9 23.0 28.7 37.9 42.9 VNDC at 70°C = 800 VDC; VOP85 at 85°C = 700 VDC; VOP105 at 105°C = 550 VDC Cap Value (µF) VDC Dimensions (mm) (*) Irms value that leads to a ΔT of ≈ 30°C in the hot spot > THS = TAMB + ΔT = 70°C + 30°C = 100°C. Attention: Hot spot at 100°C reduced the life time! © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3114_C4AQ • 7/29/2020 14 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Table 1 – Ratings & Part Number Reference cont. Cap Value VDC (µF) Dimensions (mm) T H L S S1 dV/dt Ipkr ESL ESR 70°C at 10 kHz V/µs nH mΩ Apk Irms* 70°C at 10 kHz Arms Rth (HS/Amb) Packaging Quantity (°C/W) PART NUMBER VNDC at 70°C = 1,100 VDC; VOP85 at 85°C = 900 VDC; VOP105 at 105°C = 700 VDC 1.5 2.7 3.3 5 8 12 14 20 25 30 40 55 65 1,100 1,100 1,100 1,100 1,100 1,100 1,100 1,100 1,100 1,100 1,100 1,100 1,100 11 13 14 19 22 20 28 30 35 30 35 45 45 20 25 28 29 37 40 37 45 50 45 50 56 65 31.5 31.5 31.5 31.5 31.5 42 42 42 42 57.5 57.5 57.5 57.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 52.5 52.5 52.5 52.5 \ \ \ \ \ 10.2 10.2 20.3 20.3 20.3 20.3 20.3 20.3 24 24 24 24 24 16 16 16 16 11 11 11 11 36 65 79 120 193 190 229 321 409 324 428 595 717 17 22 24 25 28 12 10 13 14 13 15 17 19 26.3 15.3 12.9 9.1 6.6 6.3 5.4 3.9 3.2 5.2 4.0 3.0 2.6 1 1.8 2.2 3.3 5 8 10 12 18 20 25 27 38 45 1,300 1,300 1,300 1,300 1,300 1,300 1,300 1,300 1,300 1,300 1,300 1,300 1,300 1,300 11 13 14 19 22 20 28 30 35 30 35 35 45 45 20 25 28 29 37 40 37 45 50 45 50 50 56 65 31.5 31.5 31.5 31.5 31.5 42 42 42 42 57.5 57.5 57.5 57.5 57.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 52.5 52.5 52.5 52.5 52.5 1 1.5 2 3 4.5 6 8 12 15 17 22 32 40 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 11 13 14 19 22 20 28 30 35 30 35 45 45 20 25 28 29 37 40 37 45 50 45 50 56 65 31.5 31.5 31.5 31.5 31.5 42 42 42 42 57.5 57.5 57.5 57.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 52.5 52.5 52.5 52.5 \ \ \ \ \ 10.2 10.2 20.3 20.3 20.3 20.3 20.3 20.3 31 31 32 32 33 22 22 22 22 14 14 14 14 31 49 65 95 148 132 176 256 326 236 308 460 562 17 22 24 25 28 12 10 13 14 13 15 17 19 29.8 20.5 15.8 11.1 8.2 9.4 7.1 4.8 3.9 6.9 5.4 3.8 3.1 T H L S S1 V/µs Apk nH dV/dt lpkr ESL 4.8 6.9 7.9 10.1 12.6 14.4 16.3 21.2 25.5 20.4 25.2 32.5 37.0 44 36 33 29 23 20 18 15 13 12 10 8 7 256 234 96 72 64 58 36 36 30 27 23 18 18 C4AQQBU4150A1WJ C4AQQBU4270A1XJ C4AQQBU4330A1YJ C4AQQBU4500A11J C4AQQBU4800A12J C4AQQBW5120A3FJ C4AQQBW5140A3JJ C4AQQBW5200A3LJ C4AQQBW5250A3OJ C4AQQBW5300A3MJ C4AQQBW5400A3NJ C4AQQEW5550A3AJ C4AQQEW5650A3BJ 44 36 33 29 23 20 18 15 13 12 10 10 8 7 256 234 96 72 64 58 36 36 30 27 23 23 18 18 C4AQUBU4100A1WJ C4AQUBU4180A1XJ C4AQUBU4220A1YJ C4AQUBU4330A11J C4AQUBU4500A12J C4AQUBW4800A3FJ C4AQUBW5100A3JJ C4AQUBW5120A3LJ C4AQUBW5180A3OJ C4AQUBW5200A3MJ C4AQUBW5250A3NJ C4AQUBW5270A3NJ C4AQUEW5380A3AJ C4AQUEW5450A3BJ 4.5 6.0 7.1 9.1 11.8 11.8 14.2 19.0 22.9 17.7 21.7 28.8 33.7 44 36 33 29 23 20 18 15 13 12 10 8 7 256 234 96 72 64 58 36 36 30 27 23 18 18 C4AQSBU4100A1WJ C4AQSBU4150A1XJ C4AQSBU4200A1YJ C4AQSBU4300A11J C4AQSBU4450A12J C4AQSBW4600A3FJ C4AQSBW4800A3JJ C4AQSBW5120A3LJ C4AQSBW5150A3OJ C4AQSBW5170A3MJ C4AQSBW5220A3NJ C4AQSEW5320A3AJ C4AQSEW5400A3BJ mΩ Arms (°C/W) ESR 70°C at 10 kHz Irms* 70°C at 10 kHz Rth (HS/Amb) Packaging Quantity PART NUMBER VNDC at 70°C = 1,300 VDC; VOP85 at 85°C = 1,100 VDC; VOP105 at 105°C = 850 VDC \ \ \ \ \ 10.2 10.2 20.3 20.3 20.3 20.3 20.3 20.3 20.3 28 29 29 29 29 20 20 20 19 13 13 13 13 13 28 52 63 95 145 157 196 235 350 262 331 354 498 596 17 22 24 25 28 12 10 13 14 13 15 15 17 19 33.1 19.1 16.0 11.2 8.2 7.9 6.3 5.3 3.7 6.5 5.2 4.9 3.6 3.1 4.2 6.2 7.1 9.1 11.8 12.9 15.0 18.1 23.7 18.3 22.0 22.8 29.8 34.0 VNDC at 70°C = 1,500 VDC; VOP85 at 85°C = 1,200 VDC; VOP105 at 105°C = 900 VDC Cap Value (µF) VDC Dimensions (mm) (*) Irms value that leads to a ΔT of ≈ 30°C in the hot spot > THS = TAMB + ΔT = 70°C + 30°C = 100°C. Attention: Hot spot at 100°C reduced the life time! © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3114_C4AQ • 7/29/2020 15 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Table 2 – Ratings & Part Number Reference for Low Profile Design Cap Value VDC (µF) Dimensions (mm) T H L S S1 dV/dt Ipkr ESL ESR 70°C at 10 kHz V/µs nH mΩ Apk Irms* 70°C at 10 kHz Arms Rth (HS/Amb) Packaging Quantity (°C/W) PART NUMBER VNDC at 70°C = 500 VDC; VOP85 at 85°C = 450 VDC; VOP105 at 105°C = 350 VDC 5.6 8 15 12 16 36 45 500 500 500 500 500 500 500 21 24 31 24 24 35 43 12.5 15 19 15 19 24 25 32 32 32 41.5 41.5 42 42 27.5 27.5 27.5 37.5 37.5 37.5 37.5 \ \ \ 10.2 10.2 20.3 20.3 10 10 10 6 7 6 7 54 81 144 78 104 232 294 11 13 16 7 8 9 9 12.4 9.1 5.5 10.7 8.1 3.7 3.0 3.3 5 10 7.5 10 20 30 650 650 650 650 650 650 650 21 24 31 24 24 35 43 12.5 15 19 15 19 24 25 32 32 32 41.5 41.5 42 42 27.5 27.5 27.5 37.5 37.5 37.5 37.5 2.7 3.8 7.5 5.8 8 15 22 800 800 800 800 800 800 800 21 24 31 24 24 35 43 12.5 15 19 15 19 24 25 32 32 32 41.5 41.5 42 42 27.5 27.5 27.5 37.5 37.5 37.5 37.5 1.5 2.5 4.8 3.8 5 10 14 1,100 1,100 1,100 1,100 1,100 1,100 1,100 21 24 31 24 24 35 43 12.5 15 19 15 19 24 25 32 32 32 41.5 41.5 42 42 27.5 27.5 27.5 37.5 37.5 37.5 37.5 1 1.8 3.3 2.6 3.5 7.5 10 1,300 1,300 1,300 1,300 1,300 1,300 1,300 21 24 31 24 24 35 43 12.5 15 19 15 19 24 25 32 32 32 41.5 41.5 42 42 27.5 27.5 27.5 37.5 37.5 37.5 37.5 1 1.5 2.8 2.2 3 6 8 1,500 1,500 1,500 1,500 1,500 1,500 1,500 21 24 31 24 24 35 43 12.5 15 19 15 19 24 25 32 32 32 41.5 41.5 42 42 27.5 27.5 27.5 37.5 37.5 37.5 37.5 \ \ \ 10.2 10.2 20.3 20.3 31 31 31 21 21 21 21 31 47 87 46 63 127 170 11 13 16 7 8 9 9 29.6 20.1 11.4 25.2 18.5 9.4 7.1 T H L S S1 V/µs Apk nH dV/dt lpkr ESL 6.8 8.6 12.6 8.6 10.5 17.8 21.4 46 39 30 33 29 23 19 192 168 80 132 88 60 48 C4AQLLU4560A11K C4AQLLU4800A12K C4AQLLU5150A19K C4AQLLW5120A34K C4AQLLW5160A33K C4AQLLW5360A36K C4AQLLW5450A38K 46 39 30 33 29 23 19 192 168 80 132 88 60 48 C4AQCLU4330A11J C4AQCLU4500A12J C4AQCLU5100A19J C4AQCLW4750A34J C4AQCLW5100A33J C4AQCLW5200A36J C4AQCLW5300A38K 46 39 30 33 29 23 19 192 168 80 132 88 60 48 C4AQILU4270A11J C4AQILU4380A12J C4AQILU4750A19J C4AQILW4580A34J C4AQILW4800A33J C4AQILW5150A36J C4AQILW5220A38J 46 39 30 33 29 23 19 192 168 80 132 88 60 48 C4AQQLU4150A11J C4AQQLU4250A12J C4AQQLU4480A19J C4AQQLW4380A34J C4AQQLW4500A33J C4AQQLW5100A36J C4AQQLW5140A38J 46 39 30 33 29 23 19 192 168 80 132 88 60 48 C4AQULU4100A11J C4AQULU4180A12J C4AQULU4330A19J C4AQULW4260A34J C4AQULW4350A33J C4AQULW4750A36J C4AQULW5100A38J 4.4 5.8 8.8 5.6 7 11.1 13.9 46 39 30 33 29 23 19 192 168 80 132 88 60 48 C4AQSLU4100A11J C4AQSLU4150A12J C4AQSLU4280A19J C4AQSLW4220A34J C4AQSLW4300A33J C4AQSLW4600A36J C4AQSLW4800A38J mΩ Arms (°C/W) ESR 70°C at 10 kHz Irms* 70°C at 10 kHz Rth (HS/Amb) Packaging Quantity PART NUMBER VNDC at 70°C = 650 VDC; VOP85 at 85°C = 600 VDC; VOP105 at 105°C = 450 VDC \ \ \ 10.2 10.2 20.3 20.3 13 13 13 9 9 9 8 41 63 127 64 86 172 245 11 13 16 7 8 10 9 16.8 11.5 6.4 13.8 10.4 5.3 3.6 5.8 7.7 11.7 7.6 9.3 14.8 19.5 VNDC at 70°C = 800 VDC; VOP85 at 85°C = 700 VDC; VOP105 at 105°C = 550 VDC \ \ \ 10.2 10.2 20.3 20.3 19 19 19 13 13 13 13 51 73 145 75 104 196 288 11 13 16 7 8 9 9 18.0 13.2 7.3 15.7 11.4 6.2 4.3 5.6 7.1 10.9 7.1 8.9 13.7 17.9 VNDC at 70°C = 1,100 VDC; VOP85 at 85°C = 900 VDC; VOP105 at 105°C = 700 VDC \ \ \ 10.2 10.2 20.3 20.3 24 24 24 16 16 16 16 36 60 116 62 81 163 229 11 13 16 7 8 9 9 26.0 16.1 9.0 19.3 14.7 7.4 5.4 4.7 6.5 9.8 6.4 7.8 12.5 15.9 VNDC at 70°C = 1,300 VDC; VOP85 at 85°C = 1,100 VDC; VOP105 at 105°C = 850 VDC \ \ \ 10.2 10.2 20.3 20.3 28 29 29 19 20 20 20 28 52 95 51 68 147 196 11 13 16 7 8 9 9 32.9 18.8 10.8 23.7 17.6 8.3 6.3 4.2 6.0 9.0 5.8 7.1 11.8 14.7 VNDC at 70°C = 1,500 VDC; VOP85 at 85°C = 1,200 VDC; VOP105 at 105°C = 900 VDC Cap Value (µF) VDC Dimensions (mm) (*) Irms value that leads to a ΔT of ≈ 30°C in the hot spot > THS = TAMB + ΔT = 70°C + 30°C = 100°C. Attention: Hot spot at 100°C reduced the life time! © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3114_C4AQ • 7/29/2020 16 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAuCu (SAC) alloys, or SnCu alloys, as the primary solder material. This has increased the liquidus temperature from 183°C for a SnPb eutectic alloy to 217 – 221°C for new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170°C). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 – 15 mm), and great care must be taken during soldering. The recommended solder profiles from KEMET should be used. Contact KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760–1 Edition 2 serves as a solid guideline for successful soldering. See Figure 1. Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the recommended limits may result in degradation or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through-hole parts after curing the surface mount parts. Contact KEMET to discuss the actual temperature profile in the oven, if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Allow time for the capacitor surface temperature to return to normal before the second soldering cycle. Wave Soldering Recommendations Manual Soldering Recommendations 300 Following is the recommendation for manual soldering with a soldering iron. 2+3 seconds max 260°C 250 Second Wave First Wave Recommended Soldering Temperature Temperature (°C) 200 400 Soldering Iron Bit Temperature (°C) 350 300 ∆T< 150°C Cooling Preheating 150 ca. 2°C/second ca. 3.5°C/second typical Tpreheat 100 Typical 250 50 200 150 0 100 0 40 80 120 160 200 240 Time (seconds) 50 0 0 1 2 3 4 5 6 7 8 Soldering Time (seconds) The soldering iron tip temperature should be set at 350°C (+10°C maximum) with the soldering duration not to exceed more than 3 seconds. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3114_C4AQ • 7/29/2020 17 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Soldering Process cont. Wave Soldering Recommendations cont. 1. The tables indicates the maximum set-up temperature of the soldering process Dielectric Film Material Maximum Preheat Temperature Maximum Peak Soldering Temperature Capacitor Pitch ≤ 15 mm Capacitor Pitch > 15 mm Capacitor Pitch ≤ 15 mm Capacitor Pitch > 15 mm Polyester 130°C 130°C 270°C 270°C Polypropylene 110°C 130°C 260°C 270°C Paper 130°C 140°C 270°C 270°C Polyphenylene Sulphide 150°C 160°C 270°C 270°C 2. The maximum temperature measured inside the capacitor: set the temperature so that inside the element the maximum temperature is below the limit. Dielectric Film Material Maximum Temperature Measured Inside the Element Polyester 160°C Polypropylene 110°C Paper 160°C Polyphenylene Sulphide 160°C Temperature monitored inside the capacitor. Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is pre-heated and transported over the solder bath, as in normal flow soldering, without touching the solder. When the board is over the bath, it is stopped. Pre-designed solder pots are lifted from the bath with molten solder, only at the places of the selected components, and pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document. However, instead of two baths, there is only one with a time from 3 – 10 seconds. In selective soldering, the risk of overheating is greater than in double wave flow soldering, and great care must be taken so that the parts do not overheat. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3114_C4AQ • 7/29/2020 18 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Mounting Resistance to Vibration and Mechanical Shock AEC-Q200 Mechanical Stress Tests: Mechanical Shock Vibration MIL-SDT-202 Method 213 Test condition C Peak value 100 g, duration 6 ms, half-sine-wave (see MIL-HDBK for details) MIL-SDT-202 Method 204 5 g for 20 minutes, 12 cycles each of 3 orientations Use 8"X5" PCB, .031" thick. 7 secure points on one 8" side and 2 secure points at corners of opposite sides. Parts mounted within 2" from any secure point. Test from 10 – 2,000 Hz. The capacitors are designed for PCB mounting. The stand-off pipes must be in good contact with the printed circuit board. The capacitor body has to be properly fixed (e.g. clamped or glued). Construction Single-sided Metallized Polypropylene Film (First Layer) Molded Plastic Case Detailed Cross Section Molded Plastic Case Self-Extinguishing Resin Single-sided Metallized Polypropylene Film (Second Layer) Margin Margin Metal Contact Layer Metal Contact Layer Margin Leads © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3114_C4AQ • 7/29/2020 19 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Construction cont. Low Profile Version: Winding Scheme: Single-sided Metallized Polypropylene Film Marking Dielectric Type, Series Manufacturing Logo Capacitance, Tolerance Rated Voltage Climatic Category (Temperature - Minimum/Maximum) Self-Healing Dielectric Date Code Internal Use Manufacturing Date Code (IEC–60062) Y = Year, Z = Month Year Code Year Code Year Code Month Code Month Code 2010 2011 2012 2013 2014 2015 2016 A B C D E F H 2017 2018 2019 2020 2021 2022 2023 J K L M N P R 2024 2025 2026 2027 2028 2029 2030 S T U V W X A January February March April May June 1 2 3 4 5 6 July August September October November December 7 8 9 O N D © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3114_C4AQ • 7/29/2020 20 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3114_C4AQ • 7/29/2020 21