C4GAHUD4330AA1J

Printed Circuit Board Mount Power Film Capacitors C4G, Axial Round, 250 – 850 VDC/160 – 450 VAC Overview Applications The C4G capacitor is a polypropylene metallized film capacitor with a polyester tape wrapping filled with resin, and uses tinned copper wires. Typical applications include clamping, blocking, coupling/ decoupling, AC harmonic filtering, and low power. Benefits • Self-healing • Low loss • High ripple current • High contact reliability • Suitable for high frequency applications • PP metallized Part Number System C4 G A D U B 4100 AA Series Type Fire Protection Rated Voltage (VDC) Insulation Lead Diameter (mm) Capacitance Code (pF) Packaging C4 = MKP Capacitors G = Round body, switching application A = No fire retardant S = Fire retardant (on request) D = 250 F = 400 H = 600 J = 700 M = 850 U = Polyester tape and resin protection 0 = Uninsulated (upon request, but not in combination with Fire Protection "S") B = 0.8 C = 1.0 D = 1.2 Digits 2 – 4 indicate the first three digits of the capacitance value. First digit indicates the number of zeros to be added. AA = Bulk (Bag) – straight leads see Dimensions Table 4 J Capacitor Length Tolerance (mm) 4 = 20.5 5 = 28 0 = 33 1 = 44 3 = 58 J = 5% K = 10% Built Into Tomorrow © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3040_C4G_AXIAL • 9/7/2022 1 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4G, Axial Round, 250 – 850 VDC/160 – 450 VAC Dimensions – Millimeters SIDE VIEW FRONT VIEW LL L LL D d D L d LL Maximum Maximum Nominal ±5 11 20.5 0.8 40 9.5 28 0.8 40 10 – 13 33 0.8 40 13.5 – 20.5 33 1 40 18 – 22.5 44 1 40 23.5 – 33 44 1.2 40 28 – 35 58 1.2 40 Qualification Reference Standards Application Class (DIN 40040) Vibration Strength VDE 0560, IEC 61071, EN 61071 GPE/LS DIN 40040, Table 6, Class V © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3040_C4G_AXIAL • 9/7/2022 2 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4G, Axial Round, 250 – 850 VDC/160 – 450 VAC Performance Characteristics Temperature Range Maximum Permissible Ambient Temperature IEC Climatic Category Peak Non-Repetitive Maximum Current Test Voltage Terminal to Terminal (VTT) Test Voltage Terminal to Case (VTC) Insulation Resistance Test Conditions Dissipation Factor (DF) Capacitance Deviation in Operating Temperature Range of -40°C to +85°C Life Expectancy Failure Quota Change of Capacitance vs. Operating Time Protection Flame Retardant (IEC 384–1) Leads Installation Damp Heat Test −40°C to +85°C +70°C 40/85/56 according to IEC 68–1 IPKR x 1.5 2 Vn for 10 seconds 3 k VDC 50 Hz for 60 seconds Temperature: +25°C ±5% Voltage charge time: 1 minute Test voltage: 100 VDC Typical value (Ris x C): 3,000 seconds ≤ 5 x 10−4 at 1 kHz and 20°C ±1.5% maximum on capacitance value measured at +20°C ≥ 30,000 hours at VRMS, ≥ 100,000 hours at Vn 300/109 components per hour −3% after 30,000 hours at VRMS or after 100,000 hours at Vn Polyester wrapping with epoxy resin fill Standard execution: non-flame retardant On request: flame retardant execution Category C Tinned copper (lead content = 5%) Any position Test Conditions Relative humidity: 93% ±2% Temperature: +40°C Test duration: 56 days Capacitance change: ≤ ±5% DF change: ≤ 50% of nominal value at 1 kHz Insulation resistance: ≥ 50% of limit value © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3040_C4G_AXIAL • 9/7/2022 3 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4G, Axial Round, 250 – 850 VDC/160 – 450 VAC Table 1 – Ratings & Part Number Reference Cap Value (µF) VDC 1 2.2 2.5 3 3.3 4 5 6.8 10 15 20 25 30 40 0.47 0.68 1 1.5 2 2.2 2.5 3 3.3 4 4.7 5 6.8 10 15 20 0.47 0.68 1 2 2.2 3 3.3 4 4.7 5 6.8 10 0.47 0.68 1 1.5 2 2.2 3 3.3 4 4.7 5 6.8 250 250 250 250 250 250 250 250 250 250 250 250 250 250 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 600 600 600 600 600 600 600 600 600 600 600 600 700 700 700 700 700 700 700 700 700 700 700 700 160 160 160 160 160 160 160 160 160 160 160 160 160 160 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 330 330 330 330 330 330 330 330 330 330 330 330 400 400 400 400 400 400 400 400 400 400 400 400 Capacitance Value (µF) VDC VAC VAC Peak VDC Maximum Dimensions (mm) Ripple Current Peak Current ESR (Maximum) dV/dt (V/ µs) Packaging Quantity Part Number D L 100 kHz 70°C (A) (A) 100 kHz (mΩ) 400 400 400 400 400 400 400 400 400 400 400 400 400 400 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 800 800 800 800 800 800 800 800 800 800 800 800 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 11 11.5 12 13.5 14 15.5 17 19.5 20 24.5 28 31 29 33.5 9.5 10 12 14.5 16.5 17.5 18.5 20 18 19.5 21 21.5 25 30 31.5 35 11 13 15.5 18.5 19.5 22.5 23.5 25.5 27.5 28.5 28.5 34.5 14.5 17 20.5 20.5 23.5 24.5 28.5 30 33 29.5 30.5 35 20.5 33 33 33 33 33 33 33 44 44 44 44 58 58 28 33 33 33 33 33 33 33 44 44 44 44 44 44 58 58 33 33 33 44 44 44 44 44 44 44 58 58 33 33 33 44 44 44 44 44 44 58 58 58 6 6 7 8 9 9 9 9 9 12 12 12 12 12 6 6 7 9 9 9 9 9 9 9 9 9 12 12 12 12 6 7 9 9 9 9 12 12 12 12 12 12 8 9 9 9 12 12 12 12 12 12 12 12 60 66 75 90 99 120 150 204 200 300 400 500 450 600 28 31 45 68 90 99 113 135 99 120 141 150 204 300 300 400 28 41 60 80 88 120 132 160 188 200 204 300 38 55 80 90 120 132 180 198 240 188 200 272 6.7 10.9 9.8 8.2 7.5 6.4 5.4 4.4 5.3 3.9 3.4 3.1 4 3.5 11.1 11.7 8.3 5.8 4.7 4.4 4 3.6 5.2 4.6 4.1 4 3.2 2.7 4.8 4 13.1 9.4 6.6 6.3 5.2 4.8 4.3 3.8 3.5 3.4 6.8 5.3 9.5 7 5.2 6.4 5 4.7 3.9 3.7 3.5 7.9 7.5 6.1 60 30 30 30 30 30 30 30 20 20 20 20 15 15 60 45 45 45 45 45 45 45 30 30 30 30 30 30 20 20 60 60 60 40 40 40 40 40 40 40 30 30 80 80 80 60 60 60 60 60 60 40 40 40 500 300 300 250 250 200 150 100 100 50 50 50 30 30 600 400 300 200 200 150 150 100 100 100 100 100 50 50 30 30 300 300 200 100 100 70 70 50 50 50 30 30 200 150 100 100 70 50 50 50 50 30 30 30 C4G(1)D(2)B4100AA4(3) C4G(1)D(2)B4220AA0(3) C4G(1)D(2)B4250AA0(3) C4G(1)D(2)C4300AA0(3) C4G(1)D(2)C4330AA0(3) C4G(1)D(2)C4400AA0(3) C4G(1)D(2)C4500AA0(3) C4G(1)D(2)C4680AA0(3) C4G(1)D(2)C5100AA1(3) C4G(1)D(2)D5150AA1(3) C4G(1)D(2)D5200AA1(3) C4G(1)D(2)D5250AA1(3) C4G(1)D(2)D5300AA3(3) C4G(1)D(2)D5400AA3(3) C4G(1)F(2)B3470AA5(3) C4G(1)F(2)B3680AA0(3) C4G(1)F(2)B4100AA0(3) C4G(1)F(2)C4150AA0(3) C4G(1)F(2)C4200AA0(3) C4G(1)F(2)C4220AA0(3) C4G(1)F(2)C4250AA0(3) C4G(1)F(2)C4300AA0(3) C4G(1)F(2)C4330AA1(3) C4G(1)F(2)C4400AA1(3) C4G(1)F(2)C4470AA1(3) C4G(1)F(2)C4500AA1(3) C4G(1)F(2)D4680AA1(3) C4G(1)F(2)D5100AA1(3) C4G(1)F(2)D5150AA3(3) C4G(1)F(2)D5200AA3(3) C4G(1)H(2)B3470AA0(3) C4G(1)H(2)B3680AA0(3) C4G(1)H(2)C4100AA0(3) C4G(1)H(2)C4200AA1(3) C4G(1)H(2)C4220AA1(3) C4G(1)H(2)C4300AA1(3) C4G(1)H(2)D4330AA1(3) C4G(1)H(2)D4400AA1(3) C4G(1)H(2)D4470AA1(3) C4G(1)H(2)D4500AA1(3) C4G(1)H(2)D4680AA3(3) C4G(1)H(2)D5100AA3(3) C4G(1)J(2)C3470AA0(3) C4G(1)J(2)C3680AA0(3) C4G(1)J(2)C4100AA0(3) C4G(1)J(2)C4150AA1(3) C4G(1)J(2)D4200AA1(3) C4G(1)J(2)D4220AA1(3) C4G(1)J(2)D4300AA1(3) C4G(1)J(2)D4330AA1(3) C4G(1)J(2)D4400AA1(3) C4G(1)J(2)D4470AA3(3) C4G(1)J(2)D4500AA3(3) C4G(1)J(2)D4680AA3(3) D (mm) D (mm) L (mm) Ripple Current Peak Current ESR dV/dt (V/µs) Packaging Quantity Part Number (1) A = No fire retardant; S = fire retardant (on request) (2) U = Tape and resin protection; 0 = unprotected (upon request, but not in combination with Fire retadant code "S") (3) K = ±10%, J = ±5% © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3040_C4G_AXIAL • 9/7/2022 4 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4G, Axial Round, 250 – 850 VDC/160 – 450 VAC Table 1 – Ratings & Part Number Reference cont. Cap Value (µF) VDC 0.15 0.22 0.33 0.47 0.68 1 1.5 2 2.2 2.5 3 3.3 4 850 850 850 850 850 850 850 850 850 850 850 850 850 450 450 450 450 450 450 450 450 450 450 450 450 450 Capacitance Value (µF) VDC VAC VAC Peak VDC Maximum Dimensions (mm) Ripple Current Peak Current ESR (Maximum) dV/dt (V/ µs) Packaging Quantity Part Number D L 100 kHz 70°C (A) (A) 100 kHz (mΩ) 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 10 12 14.5 17 20.5 20.5 24.5 28.5 29.5 31.5 28 29.5 32.5 33 33 33 33 33 44 44 44 44 44 58 58 58 5 7 9 9 9 9 12 12 12 12 12 12 12 32 46 69 99 143 140 210 280 308 350 270 297 360 14.5 10.3 7.1 5.4 4.2 4.7 3.5 3.1 3 2.9 3.6 3.5 3.2 210 210 210 210 210 140 140 140 140 140 90 90 90 400 300 200 150 100 100 70 50 50 50 30 30 30 C4G(1)M(2)B3150AA0(3) C4G(1)M(2)B3220AA0(3) C4G(1)M(2)C3330AA0(3) C4G(1)M(2)C3470AA0(3) C4G(1)M(2)C3680AA0(3) C4G(1)M(2)C4100AA1(3) C4G(1)M(2)D4150AA1(3) C4G(1)M(2)D4200AA1(3) C4G(1)M(2)D4220AA1(3) C4G(1)M(2)D4250AA1(3) C4G(1)M(2)D4300AA3(3) C4G(1)M(2)D4330AA3(3) C4G(1)M(2)D4400AA3(3) D (mm) D (mm) L (mm) Ripple Current Peak Current ESR dV/dt (V/µs) Packaging Quantity Part Number (1) A = No fire retardant; S = fire retardant (on request) (2) U = Tape and resin protection; 0 = unprotected (upon request, but not in combination with Fire retadant code "S") (3) K = ±10%, J = ±5% Environmental Compliance As a leading global supplier of electronic components and an environmentally conscious company, KEMET continually aspires to improve the environmental effects of our manufacturing processes and our finished electronic components. In Europe (RoHS Directive) and in some other geographical areas such as China (China RoHS), legislation has been enacted to prevent or otherwise limit the use of certain hazardous materials, including lead (Pb), in electronic equipment. KEMET monitors legislation globally to ensure compliance and endeavors to adjust our manufacturing processes and/or electronic components as may be required by applicable law. For military, medical, automotive, and some commercial applications, the use of lead (Pb) in the termination is necessary and/or required by design. KEMET is committed to communicating RoHS compliance to our customers. Information related to RoHS compliance will be provided in data sheets and using specific identifiers on the packaging labels. All KEMET power film capacitors are RoHS compliant. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3040_C4G_AXIAL • 9/7/2022 5 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4G, Axial Round, 250 – 850 VDC/160 – 450 VAC Materials & Environment The selection of raw materials that KEMET uses for the production of its electronic components is the result of extensive experience. KEMET directs specific attention toward environmental protection. KEMET selects its suppliers according to ISO 9001 standards and performs statistical analyses on raw materials before acceptance for use in manufacturing our electronic components. All materials are, to the best of KEMET’s knowledge, non-toxic and free from cadmium; mercury; chrome and compounds; polychlorine triphenyl (PCB); bromide and chlorinedioxins bromurate clorurate; CFC and HCFC; and asbestos. Dissipation Factor Dissipation factor is a complex function involved with capacitor inefficiency. The tgδ may vary up and down with increased temperature. For more information, refer to Performance Characteristics. Sealing Hermetically Sealed Capacitors As the temperature increases, the pressure inside the capacitor increases. If the internal pressure is high enough, it can cause a breach in the capacitor. Such a breach can result in leakage, impregnation, filling fluid, or moisture susceptibility. Barometric Pressure The altitude at which hermetically sealed capacitors are operated controls the capacitor's voltage rating. As the barometric pressure decreases, the susceptibility to terminal arc-over increases. Non-hermetic capacitors can be affected by internal stresses due to pressure changes. These effects can be in the form of capacitance changes, dielectric arc-over, and/or low insulation resistance. Altitude can also affect heat transfer. Heat that is generated in an operation cannot be dissipated properly, and high RI2 losses and eventual failure can result. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3040_C4G_AXIAL • 9/7/2022 6 Single-sided Single-sided Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors Metallized Metallized Polypropylene Polypropylene C4G, Axial Round, 250 – 850 VDC/160 – 450 VAC Film Film Double-sided Metallized Polyester Carrier Film Soldering Process Polypropylene Film Dielectric 300 3 Sections Sections has required the The implementation of the RoHS4Directive Temperature (°C) selection SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183°C for SnPb eutectic alloy to 217 – 221°C for the new alloys. As a result, the heat stress to components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene d Impregnated Paperare especiallyMetallized capacitors sensitive Polyphenylene to heat (melting point Sulfide Film of polypropylene is 160 – 170°C). Wave(SMR) soldering can be destructive especially for mechanically small polypropylene capacitors (lead spacings 5 – 10 mm) and great care must be taken during soldering. The solder profiles from KEMET are highly Metallized recommended. You may also refer to the wave Metallized PolyphenylsolderingImpregnated curve 2. Film with ene Sulfide Paperfrom IEC Publication 61760–1 Edition Vacuum-Evaporated Please consult KEMET with any questions. Aluminum Electrodes 3 Sections SnPb: 235 - 260°C SnAgCu: 250 - 260°C 250 10 s maximum Second wave First wave 200 Cooling ∆T < 150°C Preheating 150 ca. 3.5°C/s typical ca. 2°C/s 130°C 120°C 100°C 100 ca. 5°C/s Polypropylene Film/Fo Typical 50 0 0 20 40 Metal Foil 60 Construction Time (s) Film Dielectric 1 Section Detailed Cross Section Single-sided Metallized Margin Polypropylene Film (Second Layer) Metallized Polyester Film Metal F Polypropylene 220 240 80 100 120 140 160 180 200 1 Section 1 Section Double-sid Metallize Polyester Ca Film Metal Contact Layer AXIAL - Polypropylene Film/Foil Lead Polypropylene Single-sided Metallized Polyester Film Polyester Tape Wrapping Lead Single-sided Metallized Polypropylene Film Metal (FirstFoil Layer) 1 Section Winding Scheme Polyester Tape Wrapping Thermosetting Resin End-Fill Metal Contact Layer AXIAL - Single-sided Metallized Polypropylene Film Metal Foil Margin 1 Section Margin Thermosetting Resin End-Fill Film Dielectric AXIAL - Single-sided Metallized Polyester Film Single-sided Metallized Polypropylene Film 1 Section © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Single-sided Metallized Polyester Film AXIAL Metallize Double-sided Metallized Polyester Carrier Film 1 Section F3040_C4G_AXIAL • 9/7/2022 7 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4G, Axial Round, 250 – 850 VDC/160 – 450 VAC Marking Capacitance Dielectric Capacitance Tolerance Code Series Rated AC Voltage Date Code Logo Self Healing Rated DC Voltage Rated Temperature Range Application Code © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Batch Number F3040_C4G_AXIAL • 9/7/2022 8 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4G, Axial Round, 250 – 850 VDC/160 – 450 VAC KEMET Electronics Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3040_C4G_AXIAL • 9/7/2022 9