C901U120JUNDBA7317

Radial Through-Hole Ceramic Disc Capacitors Safety Standard Recognized, 900 Series, Radial Disc, Encapsulated, AH Type, X1 400 VAC/Y1 250 VAC (Industrial Grade) Overview KEMET’s 900 series encapsulated radial through-hole ceramic disc capacitors are specifically designed for interferencesuppression AC line filtering applications. Having internationally recognized safety certifications, these capacitors are well-suited for applications that require keeping potentially disruptive or damaging line transients and EMI out of susceptible equipment. They are also an ideal solution when needing to suppress line disturbances at the source. With a working voltage of 400 VAC in line-to-line (Class X)and 250 VAC in line-to-ground (Class Y) applications, these safety capacitors meet the impulse test criteria outlined in IEC Standard 60384. Meeting subclass X1 and Y1 requirements, these devices are certified to withstand impulses up to 4 KV (X1) and 8 KV (Y1) respectively. These encapsulated devices also meet the flame test requirements outlined in UL Standard 94V-0. Safety Certified Capacitors are classified as either X and/or Y capacitors. Class X capacitors are primarily used in line-to line (across-the-line) applications. In this application there is no danger of electric shock to humans should the capacitor fail, but could result in a risk of fire. The class Y capacitor is primarily used in line-to-ground (line by-pass) applications. In this application, failure of the capacitor could lead to danger of electric shock. Ordering Information C9 1 1 U 620 J U Ceramic Series Body Diameter Lead Spacing1 Spec. Capacitance Code (pF) Capacitance Tolerance Rated Voltage 2 significant digits + Number of zeroes Use 9 for 1.0 9.9pF e.g., 2.2pF = 229 C = ±0.25pF D = ±0.5pF J = ±5% K = ±10% M = ±10% U = X1 400 VAC / Y1 250 VAC C9 = Ceramic 900 Series 0 = 7.0 mm 1 = 10.0 mm U = 1 = 8.0 mm Safety 2 = 9.0 mm 3 = 10.0 mm 4 = 11.0 mm 5 = 12.0 mm 7 = 14.0 mm S D Dielectric/ Design Temp. Char. N = CH (NP0) S = SL Y = Y5P W = Y5U V = Y5V D= Disc A A 7317 Lead Config.2 Failure Rate Packaging (C-Spec)1,2 A= N/A 7317 = Ammo Pack WL30 = Bulk/3.0 mm Lead length WL35 = Bulk/3.5 mm Lead length WL40 = Bulk/4.0 mm Lead length WL45 = Bulk/4.5 mm Lead length WL50 = Bulk/5.0 mm Lead length WL20 = Bulk/20 mm Lead length A= Straight B= Vertical Kink C= Outside Kink 1 "Vertical Kink" and "Outside Kink" lead configurations cannot be combined with the bulk/20 mm lead length option (WL20). 20 mm lead length is only available on capacitors ordered with straight leads (lead configuration ordering code "A"). For nonstandard lead length inquiries, please contact KEMET. 2 Bulk packaging lead length availability is dependent upon "Lead Configuration." See "Dimensions" section of this document to verify availability of a specific lead length option. For nonstandard lead length inquiries, please contact KEMET. One world. One KEMET © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1067_X1_400 VAC_Y1_250 VAC • 11/14/2013 1 Radial Through-Hole Ceramic Disc Capacitors Safety Standard Recognized, 900 Series, Radial Disc, Encapsulated, AH Type, X1 400 VAC/Y1 250 VAC (Industrial Grade) Lead Configurations Straight Vertical Kink Outside Kink Dimensions – Millimeters Lead Config. F Lead Lead Config. Packaging Spacing Lead Ordering Type Tolerance Spacing 1 Code Ammo Pack Straight A 10.0 ±1.0 Bulk Ammo Pack Vertical Kink (Preformed) B 10.0 ±1.0 Bulk Ammo Pack Outside Kink (Preformed) C 10.0 ±1.0 Bulk L Lead Length D T e Packaging C-Spec Body Body Lead Ordering Diameter Thickness Meniscus Code2 20.0 +1.5/-1.0 7317 3.0 ±1.0 WL30 4.5 ±1.0 WL45 5.0 ±1.0 WL50 20.0 minimum WL20 18.0 +2.0/-0 7317 3.5 ±1.0 WL35 4.0 ±1.0 WL40 18.0 +2.0/-0 7317 3.5 ±1.0 WL35 4.0 ±1.0 WL40 5.0 ±1.0 WL50 See Table 1 - "Product Ordering Codes and Ratings" 3.0 maximum Ød Lead Dia. 0.5 ±0.1 Lead Configuration is identified in the 13th character of the ordering code. See "Lead Configuration" and "Ordering Information" sections of this document for further details. 2 The "Packaging C-Spec" is a 4-digit numeric or alphanumeric code which identifies both the packaging type and lead length requirement. When ordering, this code must be included in the 15th through 18th character positions of the ordering code. See "Ordering Information" section of this document for further details. 1 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1067_X1_400 VAC_Y1_250 VAC • 11/14/2013 2 Radial Through-Hole Ceramic Disc Capacitors Safety Standard Recognized, 900 Series, Radial Disc, Encapsulated, AH Type, X1 400 VAC/Y1 250 VAC (Industrial Grade) Benefits • • • • • • • • • • • • • Safety Standard Recognized (IEC 60384-14) Reliable operation up to 125°C Class X1/Y1 10 mm lead spacing Lead (Pb)-free and RoHS Compliant Halogen Free Capacitance offerings ranging from 2.0 pF up to 4,700 pF Available capacitance tolerances of ±0.25 pF, ±0.5 pF, ±5%, ±10%, and ±20% High reliability Preformed (crimped) or straight lead configurations Non-polar device, minimizing installation concerns 100% pure matte tin-plated lead finish allowing for excellent solderability Encapsulation meets flammability standard UL 94V–0 Applications Typical applications include: • Line-to-line (Class X) filtering • Line-to-ground (Class Y) filtering • Antenna coupling • Primary and secondary coupling (switching power supplies) • Line disturbances suppression (motors and motor controls, relays, switching power supplies, and inverters) Approval Standard and Certification No. Safety Standard Standard No. VDE (ENEC) IEC 60384–14 Subclass Working Voltage X1 400 VAC Y1 250 VAC Certificate No. 40036417 These devices are VDE/ENEC recognized for antenna coupling and AC line-to-line (Class X) and line-to-ground (Class Y) applications per IEC60384–14. Environmental Compliance These devices are Halogen Free and RoHS Compliant. They meet all requirements set forth by both EU and China RoHS directives. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1067_X1_400 VAC_Y1_250 VAC • 11/14/2013 3 Radial Through-Hole Ceramic Disc Capacitors Safety Standard Recognized, 900 Series, Radial Disc, Encapsulated, AH Type, X1 400 VAC/Y1 250 VAC (Industrial Grade) General Specifications/Performance Characteristics Dielectric/Temperature Characteristic: CH(NP0) SL Y5P Operating Temperature Range: Capacitance Change with Reference to +25°C and 0 VDC Applied (TCC): Dissipation Factor (tanδ) at +25ºC1 Y5V +20%/-55% ~ +30%/-80% -25°C to +125°C ±60 ppm/ºC -1,000 ~ +350 ppm/ºC ±10% 4,000 VAC (60 ±5 seconds at 25ºC) Dielectric Withstanding Voltage Quality Factor (Q) Y5U 30 pF% and above: ≥ 1,000 Below 30 pF: ≥ 400 +(20xC)* See “Dissipation Factor” See “Quality Factor” 2.50% 2.50% 5.0% 10,000 MΩ Minimum (500 VDC applied for 60 ±5 seconds @ 25°C) Insulation Resistance (IR) Limit at +25°C * C = Nominal capacitance 1 Capacitance and Dissipation Factor (DF) measured under the following conditions: CH(NP0) and SL: 1 MHz ±100 kHz and 1.0 ±0.2 Vrms X5P, Y5U and Y5V: 1 kHz ±50 Hz and 1.0 ±0.2 Vrms Note: When measuring capacitance, it is important to ensure the set voltage level is held constant. The HP4284 & Agilent E4980 have a feature known as Automatic Level Control (ALC). The ALC feature should be switched to "ON." Table 1 – Product Ordering Codes and Ratings Dimensions (mm) Dielectric/ Temp. Char. KEMET Part Number Capacitance CH (NP0) C901U209CUND(1)A(2) C901U309CUND(1)A(2) C901U409CUND(1)A(2) C901U509CUND(1)A(2) C901U609DUND(1)A(2) C901U709DUND(1)A(2) C901U809DUND(1)A(2) C901U909DUND(1)A(2) C901U100DUND(1)A(2) C901U120JUND(1)A(2) C911U150JUND(1)A(2) C911U180JUND(1)A(2) C911U200JUND(1)A(2) C911U220JUND(1)A(2) C911U240JUND(1)A(2) C911U270JUND(1)A(2) 2.0 pF 3.0 pF 4.0 pF 5.0 pF 6.0 pF 7.0 pF 8.0 pF 9.0 pF 10 pF 12 pF 15 pF 18 pF 20 pF 22 pF 24 pF 27 pF KEMET Part Number Capacitance Capacitance Tolerance Lead Spacing Body Body Lead Diameter Thickness Diameter (Maximum) (Maximum) Bulk Packaging Ammo Packaging ±0.25 pF 7.0 ±0.5 pF ±5% 5.0 0.5 ±0.1 10 mm Body Thickness (Maximum) Lead Diameter Lead Spacing 8.0 Capacitance Tolerance Body Diameter (Maximum) (1) To properly complete ordering code, insert the one-digit character code to reflect the required lead configuration: (See "Lead Configuration" section of this document, page 2, for further details.) A = Straight B = Vertical Kink C = Outside Kink (2) To properly complete ordering code, enter the four-digit numeric or alphanumeric "Packaging C-Spec Ordering Code." See "Dimensions" section of this document, page 2, for available options. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1067_X1_400 VAC_Y1_250 VAC • 11/14/2013 Roll Over for Order Info. 4 Radial Through-Hole Ceramic Disc Capacitors Safety Standard Recognized, 900 Series, Radial Disc, Encapsulated, AH Type, X1 400 VAC/Y1 250 VAC (Industrial Grade) Table 1 – Product Ordering Codes and Ratings cont'd Dimensions (mm) Dielectric/ Temp. Char. KEMET Part Number Capacitance SL C901U150JUSD(1)A(2) C901U180JUSD(1)A(2) C901U200JUSD(1)A(2) C901U220JUSD(1)A(2) C901U240JUSD(1)A(2) C901U270JUSD(1)A(2) C901U300JUSD(1)A(2) C901U330JUSD(1)A(2) C901U360JUSD(1)A(2) C901U390JUSD(1)A(2) C911U470JUSD(1)A(2) C911U500JUSD(1)A(2) C911U510JUSD(1)A(2) C911U560JUSD(1)A(2) C911U620JUSD(1)A(2) C921U680JUSD(1)A(2) C921U750JUSD(1)A(2) C921U820JUSD(1)A(2) C931U101JUSD(1)A(2) 15 pF 18 pF 20 pF 22 pF 24 pF 27 pF 30 pF 33 pF 36 pF 39 pF 47 pF 50 pF 51 pF 56 pF 62 pF 68 pF 75 pF 82 pF 100 pF C901U101KUYD(1)A(2) C901U151KUYD(1)A(2) C901U221KUYD(1)A(2) C901U331KUYD(1)A(2) C911U471KUYD(1)A(2) C921U561KUYD(1)A(2) C921U681KUYD(1)A(2) C941U102KUYD(1)A(2) 100 pF 150 pF 220 pF 330 pF 470 pF 560 pF 680 pF 1,000 pF Y5U C911U102MUWD(1)A(2) C921U152MUWD(1)A(2) C931U222MUWD(1)A(2) C951U332MUWD(1)A(2) C961U392MUWD(1)A(2) C971U472MUWD(1)A(2) 1,000 pF 1,500 pF 2,200 pF 3,300 pF 3,900 pF 4,700 pF Y5V C901U102MUVD(1)A(2) C911U152MUVD(1)A(2) C921U222MUVD(1)A(2) C941U332MUVD(1)A(2) C951U472MUVD(1)A(2) KEMET Part Number Y5P Capacitance Tolerance Lead Spacing Body Body Lead Diameter Thickness Diameter (Maximum) (Maximum) Bulk Packaging Ammo Packaging 7.0 ±5% 5.0 0.5 ±0.1 10 mm 5.0 0.5 ±0.1 10 mm ±20% 8.0 9.0 10.0 12.0 13.0 14.0 5.0 0.5 ±0.1 10 mm 1,000 pF 1,500 pF 2,200 pF 3,300 pF 4,700 pF ±20% 7.0 8.0 9.0 11.0 12.0 5.5 0.5 ±0.1 10 mm Capacitance Capacitance Tolerance Body Diameter (Maximum) Body Thickness (Maximum) Lead Diameter Lead Spacing 8.0 9.0 10.0 7.0 ±10% 8.0 9.0 11.0 (1) To properly complete ordering code, insert the one-digit character code to reflect the required lead configuration: (See "Lead Configuration" section of this document, page 2, for further details.) A = Straight B = Vertical Kink C = Outside Kink (2) To properly complete ordering code, enter the four-digit numeric or alphanumeric "Packaging C-Spec Ordering Code." See "Dimensions" section of this document, page 2, for available options. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1067_X1_400 VAC_Y1_250 VAC • 11/14/2013 Roll Over for Order Info. 5 Radial Through-Hole Ceramic Disc Capacitors Safety Standard Recognized, 900 Series, Radial Disc, Encapsulated, AH Type, X1 400 VAC/Y1 250 VAC (Industrial Grade) Table 2 – Performance & Reliability: Test Methods and Conditions Item Specification -25ºC to +125ºC Operating Temperature Range Dielectric Strength Between lead wires No failures Body Insulation No failures Insulation Resistance (IR) 10,000 MΩ minimum Capacitance Within specified tolerance Dissipation Factor (DF) or Q Temperature Characteristics Temperature Characteristics Specification Y5P, Y5U DF ≤ 2.5% Y5V DF ≤ 5.0% NP0,SL ≥ 30 pF: Q ≥ 1,000 < 30 pF: Q ≥ 400 +(20 x C) C = Nominal capacitance Temperature Characteristics Capacitance Change Y5P Y5P, Y5U and Y5V: Capacitance is measured at 1 kHz ±20% and 5 Vrms or less. (20 ±2°C) NP0 and SL: Capacitance is measured at 1 MHz ±20% and 1.0 ±0.2 Vrms (25°C) A capacitance measurement is made at each step specified: Temperature 1 +20 ±2ºC Within ±10% 2 -25 ±2ºC Y5U Within +22%/-56% 3 +20 ±2ºC Y5V Within ~+30%/-80% 4 +85 ±2ºC CH 0 ±60 ppm/ºC 5 +20 ±2ºC SL -1,000 ~+350 ppmºC (+20ºC ~+85ºC) Lead wire or capacitor body shall not break. Bending Lead wire or capacitor body shall not break. Terminal Strength 1 The capacitor shall not be damaged when 4,000 VAC(rms) is applied between the lead wires for 60 seconds. The terminals (leads) of the capacitor shall be connected together. A metal foil is tightly wrapped around the body of the capacitor at a distance of about 3 to 4 mm from each terminal. The capacitor is then inserted into a container filled with metal balls approximately 1 mm in diameter. 4,000 VAC(rms) is applied for 60 seconds between the capacitor lead wires and metal balls. The insulation resistance shall be measured with 500 ±50 VDC applied after 60 ±5 seconds of charging. Step Tensile Solderability Test Method Lead wire should have a uniform coating of solder in the axial direction and over 3/4 of its circumference. Pre-treatment: Capacitor is stored at 85 ±2ºC for 1 hour and then placed at room condition1 for 24 ±2 hours before measurement. With the termination in its normal position, the specimen is held by its body in such a manner that the axis of the termination is vertical; a tensile force of 10 N is applied to the termination in the direction of its axis and acting in a direction away from the body of the specimen. With the termination in its normal position, the specimen is held by its body in such a manner that the axis of the termination is vertical; a mass force of 5 N is then suspended from the end of the termination. The body of the specimen is then inclined within a period of 2 to 3 seconds, through an angle of approximately 90° in the vertical plane and then resumed to its initial position over the same period of time; this operation constitutes one bend. One bend immediately followed by a second bend in the opposite direction. The lead wire of the capacitor is dipped into molten solder for 2 ±0.5 seconds. The depth of immersion is up to 1.5 mm (+5/-0 mm) from the root of lead wires. Solder Temperature: Lead free solder (Sn-3Ag – 0.5Cu) 245°C ±5°C. “Room Condition” is defined as follows: Temperature: 15 ~ 35°C/Humidity: 45 ~ 75%/Atmospheric Pressure: 86 ~ 106 kPa. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1067_X1_400 VAC_Y1_250 VAC • 11/14/2013 6 Radial Through-Hole Ceramic Disc Capacitors Safety Standard Recognized, 900 Series, Radial Disc, Encapsulated, AH Type, X1 400 VAC/Y1 250 VAC (Industrial Grade) Table 2 – Performance & Reliability: Test Methods and Conditions cont'd Item Soldering Effect (Non-Preheat) Specification Test Method Appearance No visual defect IR 1,000 MΩ Dielectric Strength Per item 1 As shown in the figure below, the lead wires are immersed in molten solder up to 1.5 mm (+5/-0 mm) from the end of the epoxy meniscus (root of lead wire). Duration/Solder Temperature: 3.5 ±0.5 seconds/350°C ±10°C or 10 ±1 seconds/260°C ±5°C Capacitance Y5P, Y5U and Y5V: Within ±10% SL, CH (NP0): Within ±2.5% or ±0.25 pF, whichever is larger. Appearance No visual defect IR 1,000 MΩ Dielectric Strength Per item 1 Capacitance Y5P, Y5U and Y5V: Within ±10% SL, CH (NP0): Within ±2.5% or ±0.25 pF, whichever is larger. Soldering Effect (Preheat) Appearance Capacitance Biased Humidity DF Q IR Dielectric Strength 1 No visual defect Temperature Characteristics Capacitance Change Y5P Within ±10% Y5U Within ±20% Y5V Within ±30% SL CH (NP0) Within ±2.5% or ±0.25 pF, whichever is larger. Y5P and Y5U: 5.0% maximum Y5V: 7.5% maximum SL&CH(NP0): Less than 30 pF: Q ≥ 100+10×C/3 More than 30 pF: Q ≥ 200 C = Nominal capacitance Y5P, Y5V and Y5U: 3,000 MΩ minimum SL and CH (NP0): 1,000 MΩ minimum Pre-treatment: Capacitor is stored at 85°C ±2°C for 1 hour and then placed at room condition1 for 24 ±2 hours before initial measurements. Post-treatment: Capacitor is stored for 1 to 2 hours at room condition1. Capacitor is stored at 120°C +0/-5°C for 60 +0/-5 seconds. Then, as shown in the figure below, the lead wires are immersed in molten solder up to 1.5 mm (+5/-0mm) from the end of the epoxy meniscus (root of lead wire). Duration/Solder Temperature: 7.5 +0/-1 seconds/260°C ±5°C Pre-treatment: Capacitor is stored at 85°C ±2°C for 1 hour and then placed at room condition1 for 24 ±2 hours before initial measurements. Post-treatment: Capacitor is stored for 1 to 2 hours at room condition1. Steady State Humidity: Load Humidity: 90 to 95% humidity at 40°C ±2°C for 500 ±12 hours. 90 to 95% humidity at 40°C ±2°C for 500 ±12 hours with full rated voltage applied. Post Treatment: Capacitor is stored for 1 to 2 hours at room condition1. Post Treatment: Capacitor is stored for 1 to 2 hours at room condition1. No failures “Room Condition” is defined as follows: Temperature: 15 ~ 35°C/Humidity: 45 ~ 75%/Atmospheric Pressure: 86 ~ 106 kPa. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1067_X1_400 VAC_Y1_250 VAC • 11/14/2013 7 Radial Through-Hole Ceramic Disc Capacitors Safety Standard Recognized, 900 Series, Radial Disc, Encapsulated, AH Type, X1 400 VAC/Y1 250 VAC (Industrial Grade) Table 2 – Performance & Reliability: Test Methods and Conditions cont'd Specification No visual defect Appearance Capacitance Change IR Y5P, Y5V and Y5U: Within ±20% SL and CH (NP0): Within ±3 or ±0.3 pF, whichever is larger. 3,000 MΩ minimum SL and CH (NPO): 1,000 MΩ minimum High Temperature Life Dielectric Strength No failures Test Method Impulse Voltage: Each individual capacitor is subjected to three 8 kv impulses prior to life testing. 0.9Vp Cx (uF) 0.01 0.1 UPR Vp Voltage Item UPP tr (uS) 1.2 1.5 td (uS) 46 47 0.5Vp tr td Time Capacitors are placed in a circulating air oven for a period of 1,000 hours. The air in the oven is maintained at a temperature of 125°C ±2°C throughout the test. The capacitors are subjected to AC 425 Vrms. Each hour the voltage is increased to AC 1,000 Vrms for 0.1 seconds. The capacitor is exposed to a flame for 15 seconds and then removed for 15 seconds. This test is repeated for 5 cycles. The capacitor flame extinguishes as follows: Flame Test Cycle Time 1~4 30 seconds maximum 5 60 seconds maximum The capacitors are individually wrapped in at least one, but not more than two, complete layers of cheesecloth. They are then subjected to 20 discharges. The interval between successive discharges is 5 seconds. The VAC is maintained for 2 minutes after the last discharge. Active Flammability 1 The cheesecloth should not ignite. C1, 2 1 μF ±10% C3 0.033 μF ±5% 10 kV L1-4 1.5 Mh ±20% 16A Rod core choke Cx Test capacitor R 100 ±2% VAC VR ±5% Ct 3 μF ±5% 10 kV VR Rated Voltage F Fuse, Rated 10A Vt Voltage applied to Ct “Room Condition” is defined as follows: Temperature: 15 ~ 35°C/Humidity: 45 ~ 75%/Atmospheric Pressure: 86 ~ 106 kPa. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1067_X1_400 VAC_Y1_250 VAC • 11/14/2013 8 Radial Through-Hole Ceramic Disc Capacitors Safety Standard Recognized, 900 Series, Radial Disc, Encapsulated, AH Type, X1 400 VAC/Y1 250 VAC (Industrial Grade) Table 2 – Performance & Reliability: Test Methods and Conditions cont'd Item Specification Test Method The capacitor under test is held into a flame and in a position which best promotes burning. Each specimen is exposed to the flame one time. Passive Flammability The burning time should not exceed 30 seconds. The tissue paper should not ignite. Time of exposure to flame: Length of flame: Gas burner length: Inside diameter: Outside diameter: Gas butane gas purity: Appearance Capacitance Temperature Cycle No visual defect Temperature Characteristics Capacitance Change SL, CH (NP0) Within ±5% Y5P Within ±10% Y5U, Y5V Within ±20% SL, CH (NP0) ≥30 pF: Q ≥ 350