CBR05C101JAGAC

Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications Ultra HiQ-CBR Squared Series, C0G Dielectric, Low ESR 250 VDC, 1 MHz – 50 GHz (RF & Microwave) Overview KEMET’s Ultra HiQ-CBR 0505 Series surface mount multilayer ceramic capacitors (MLCCs) in C0G dielectric feature a robust and exceptionally stable copper electrode dielectric system as well as a square case size that offers excellent low loss performance (ultra high Q). These devices provide extremely low ESR and high self-resonance characteristics, and are well-suited for higher power applications where minimal heating due to I2R losses are a factor. CBR Series capacitors exhibit no change in capacitance with respect to time and voltage, and boast a negligible change in capacitance with reference to ambient temperature. Capacitance change is limited to ±30 ppm/ºC from −55°C to +125°C. CBR Series devices are suitable for many circuit applications including RF power amplifiers, mixers, oscillators, low noise amplifiers, filter networks, antenna tuning, timing circuits, delay lines, and MRI imaging coils. Benefits • Ultra high Q and extremely low ESR • 0505 Square case size for higher SRF versus standard EIA case sizes • High thermal stability • 1 MHz to 50 GHz frequency range • Operating temperature range of −55°C to +125°C • Base metal electrode (BME) dielectric system • Pb-free and RoHS compliant • DC voltage rating of 250 V • Capacitance offerings ranging from 0.4 pF up to 100 pF • Available capacitance tolerances of ±0.05 pF, ±0.1 pF, ±0.25 pF, ±0.5 pF, ±1%, ±2%, and ±5% Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality Ordering Information 1 CBR 05 C 330 F A G Series Case Size (L"x W") Specification/ Series Capacitance Code (pF) Capacitance Tolerance Rated Voltage (VDC) Dielectric CBR 05 = 0505 C = Standard Two significant digits and number of zeros Use 9 for 1.0 – 9.9 pF Use 8 for 0.1 – 0.99 pF e.g., 2.2 pF = 229 e.g., 0.5 pF = 508 A = ±0.05 pF B = ±0.10 pF C = ±0.25 pF D = ±0.50 pF F = ±1% G = ±2% J = ±5% A = 250 V G = C0G A C Termination Termination Finish Style A = N/A C = 100% Matte Sn Packaging/ Grade (C-Spec)1 Blank = 7" Reel Unmarked When ordering CBR Series devices, a "suffix" or "C-Spec" is not required to indicate a 7" reel packaging option. CBR devices are only available and shipped on 7" reels (paper tape). Bulk bag and cassette packaging options are not available. Please contact KEMET if you have a specific, nonstandard packaging requirement. One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com C1082_C0G_CBR_0505 • 7/9/2019 1 Ultra HiQ-CBR Squared Series, C0G Dielectric, Low ESR 250 VDC, 1 MHz – 50 GHz (RF & Microwave) Benefits cont. • No piezoelectric noise • No capacitance change with respect to applied rated DC voltage • Negligible capacitance change with respect to temperature • No capacitance decay with time • Non-polar device, minimizing installation concerns • 100% pure matte tin-plated termination finish allowing for excellent solderability Applications Typical applications include critical timing, tuning, bypass, coupling, feedback, filtering, impedance matching and DC blocking. Field applications include wireless and cellular base stations, wireless LAN, subscriber-based wireless services, wireless broadcast equipment, satellite communications, RF power amplifier (PA) modules, filters, voltage-controlled oscillators (VCOs), PAs, matching networks, RF modules, satellite communications and medical electronics. Qualification RF and microwave products are subject to internal qualification. Details regarding test methods and conditions are referenced in Table 4, Performance & Reliability. Environmental Compliance Pb-free and RoHS compliant. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com C1082_C0G_CBR_0505 • 7/9/2019 2 Ultra HiQ-CBR Squared Series, C0G Dielectric, Low ESR 250 VDC, 1 MHz – 50 GHz (RF & Microwave) Dimensions – Millimeters (Inches) W T B L Case Size (in.) Case Size (mm) L Length W Width T Thickness B Bandwidth Mounting Technique 0505 1414 1.40+0.38/−0.25 (0.055+0.015/−0.01) 1.40±0.38 (0.055±0.015) 1.15±0.15 (0.045±0.006) 0.25+0.25−0.13 (0.010+0.010−0.005) Solder Reflow Only Electrical Parameters/Characteristics Item Parameters/Characteristics Operating Temperature Range: Capacitance Change with Reference to +25°C and 0 VDC Applied (TCC): Aging Rate (Maximum % Capacitance Loss/Decade Hour): Dielectric Withstanding Voltage (DWV): 1 2 3 Quality Factor (Q): Insulation Resistance (IR) Limit at 25°C: −55°C to +125°C 0 ±30 ppm/ºC 0% See Dielectric Withstanding Voltage Table (5±1 seconds and charge/discharge not exceeding 50 mA) ≥ 1,400 for capacitance values ≥30 pF ≥ 800 + 20°C for capacitance values < 30 pF (C = Capacitance in pF) 10 GΩ minimum (rated voltage applied for 120±5 seconds) DWV is the voltage a capacitor can withstand (survive) for a short period of time. It exceeds the nominal and continuous working voltage of the capacitor. 2 Capacitance and quality factor (Q) measured at 1 MHz ±100 kHz and 1.0 ±0.2 Vrms. 3 To obtain IR limit, divide MΩ-µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits. Note: When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature known as Automatic Level Control (ALC). The ALC feature should be switched to "ON." 1 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com C1082_C0G_CBR_0505 • 7/9/2019 3 Ultra HiQ-CBR Squared Series, C0G Dielectric, Low ESR 250 VDC, 1 MHz – 50 GHz (RF & Microwave) Dielectric Withstanding Voltage Table Rated Voltage (VDC) 250 V DWV 200% Electrical Characteristics SRF (MHz) vs. Cap (pF) 10,000 SRF (MHz) 0402 0603 0505 0805 1,000 100 0.1 1 Cap (pF) 10 100 ESR vs. Frequency 0505 Q vs. Frequency 0505 10,000 1 1 pF 1,000 4.7 pF 4.7 pF 10 pF 0.1 Q ESR (Ohms) 1 pF 22 pF 10 pF 100 22 pF 47 pF 10 47 pF 68 pF 0.01 100 1,000 Freq (MHz) 10,000 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 68 pF 1 100 1,000 Freq (MHz) C1082_C0G_CBR_0505 • 7/9/2019 10,000 4 Ultra HiQ-CBR Squared Series, C0G Dielectric, Low ESR 250 VDC, 1 MHz – 50 GHz (RF & Microwave) Table 1 – CBR Series, Capacitance Range Waterfall Case Size – Inches (mm) 0505 (1414) mm (Inches) mm (Inches) mm (Inches) mm (Inches) Length Width Thickness Bandwidth 1.40 +0.38 / −0.25 (0.055 +0.015 / −0.01) 1.40 ± 0.38 (0.055 ± 0.015) 1.15 ± 0.15 (0.045 ± 0.006) 0.25 + 0.25 − 0.13 (0.010 + 0.010 − 0.005) Rated Voltage (VDC) 250 Voltage Code Capacitance A Capacitance Tolerance Capacitance Code (Available Capacitance) A = ±0.05pF B = ±0.10pF C = ±0.25pF D = ±0.50pF 408 508 608 708 808 908 109 119 129 139 149 159 169 179 189 199 209 219 229 239 249 259 269 279 289 299 309 319 329 339 349 359 369 379 389 399 409 419 429 439 449 459 469 479 489 499 509 0.4 pF 0.5 pF 0.6 pF 0.7 pF 0.8 pF 0.9 pF 1.0 pF 1.1 pF 1.2 pF 1.3 pF 1.4 pF 1.5 pF 1.6 pF 1.7 pF 1.8 pF 1.9 pF 2.0 pF 2.1 pF 2.2 pF 2.3 pF 2.4 pF 2.5 pF 2.6 pF 2.7 pF 2.8 pF 2.9 pF 3.0 pF 3.1 pF 3.2 pF 3.3 pF 3.4 pF 3.5 pF 3.6 pF 3.7 pF 3.8 pF 3.9 pF 4.0 pF 4.1 pF 4.2 pF 4.3 pF 4.4 pF 4.5 pF 4.6 pF 4.7 pF 4.8 pF 4.9 pF 5.0 pF Rated Voltage (VDC) 250 Voltage Code A * Available only in "B" ( ±0.1 pF) capacitance tolerance. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com C1082_C0G_CBR_0505 • 7/9/2019 5 Ultra HiQ-CBR Squared Series, C0G Dielectric, Low ESR 250 VDC, 1 MHz – 50 GHz (RF & Microwave) Table 1 – CBR Series, Capacitance Range Waterfall cont'd Case Size – Inches (mm) mm (Inches) mm (Inches) mm (Inches) mm (Inches) Length Width Thickness Bandwidth Rated Voltage (VDC) Voltage Code Capacitance 0505 (1414) 1.40 +0.38 / −0.25 (0.055 +0.015 / −0.01) 1.40 ± 0.38 (0.055 ± 0.015) 1.15 ± 0.15 (0.045 ± 0.006) 0.25 + 0.25 − 0.13 (0.010 + 0.010 − 0.005) 250 A Capacitance Tolerance Capacitance Code (Available Capacitance) B = ±0.10pF C = ±0.25pF D = ±0.50pF 519 529 539 549 559 569 579 589 599 609 619 629 639 649 659 669 679 689 699 709 719 729 739 749 759 769 779 789 799 809 819 829 839 849 859 869 879 889 899 909 919 929 939 949 959 5.1 pF 5.2 pF 5.3 pF 5.4 pF 5.5 pF 5.6 pF 5.7 pF 5.8 pF 5.9 pF 6.0 pF 6.1 pF 6.2 pF 6.3 pF 6.4 pF 6.5 pF 6.6 pF 6.7 pF 6.8 pF 6.9 pF 7.0 pF 7.1 pF 7.2 pF 7.3 pF 7.4 pF 7.5 pF 7.6 pF 7.7 pF 7.8 pF 7.9 pF 8.0 pF 8.1 pF 8.2 pF 8.3 pF 8.4 pF 8.5 pF 8.6 pF 8.7 pF 8.8 pF 8.9 pF 9.0 pF 9.1 pF 9.2 pF 9.3 pF 9.4 pF 9.5 pF Rated Voltage (VDC) 250 Voltage Code A © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com C1082_C0G_CBR_0505 • 7/9/2019 6 Ultra HiQ-CBR Squared Series, C0G Dielectric, Low ESR 250 VDC, 1 MHz – 50 GHz (RF & Microwave) Table 1 – CBR Series, Capacitance Range Waterfall cont'd Case Size – Inches (mm) mm (Inches) mm (Inches) mm (Inches) mm (Inches) Length Width Thickness Bandwidth Rated Voltage (VDC) Voltage Code Capacitance 0505 (1414) 1.40 +0.38 / −0.25 (0.055 +0.015 / −0.01) 1.40 ± 0.38 (0.055 ± 0.015) 1.15 ± 0.15 (0.045 ± 0.006) 0.25 + 0.25 − 0.13 (0.010 + 0.010 − 0.005) 250 A Capacitance Tolerance Capacitance Code (Available Capacitance) F = ±1% G = ±2% J = ±5% 969 979 989 999 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 101 9.6 pF 9.7 pF 9.8 pF 9.9 pF 10 pF 11 pF 12 pF 13 pF 15 pF 16 pF 18 pF 20 pF 22 pF 24 pF 27 pF 30 pF 33 pF 36 pF 39 pF 43 pF 47 pF 51 pF 56 pF 62 pF 68 pF 75 pF 82 pF 91 pF 100 pF Rated Voltage (VDC) 250 Voltage Code A © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com C1082_C0G_CBR_0505 • 7/9/2019 7 Ultra HiQ-CBR Squared Series, C0G Dielectric, Low ESR 250 VDC, 1 MHz – 50 GHz (RF & Microwave) Table 2 – Chip Thickness/Reeling Quantities Chip Size Chip Thickness Inches (mm) (mm) 0505 (1414) 1.15 ±0.15 Reel Quantity 7" Paper 13" Paper 3,000 Contact KEMET for availability. Table 3 – Chip Capacitor Land Pattern Design Recommendations per IPC–7351 (mm) Case Size (Inches) Case Size (mm) 0505 1414 Density Level A: Maximum (Most) Land Protrusion Density Level B: Median (Nominal) Land Protrusion Density Level C: Minimum (Least) Land Protrusion C Y X V1 V2 C Y X V1 V2 C Y X V1 V2 0.92 1.15 1.89 3.99 2.89 0.82 0.95 1.79 3.09 2.29 0.72 0.75 1.69 2.43 1.93 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. KEMET only recommends wave soldering of 0603(1608) and 0805 (2012) case sizes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC Standard 7351 (IPC–7351). Image below based on Density Level B for an EIA 1608 case size. V1 Y Y X V2 X C C Grid Placement Courtyard © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com C1082_C0G_CBR_0505 • 7/9/2019 8 Ultra HiQ-CBR Squared Series, C0G Dielectric, Low ESR 250 VDC, 1 MHz – 50 GHz (RF & Microwave) Soldering Process Recommended Soldering Technique: • 0505 case sizes are limited to solder reflow only Recommended Soldering Profile: • KEMET recommends following the guidelines outlined in IPC/JEDEC J–STD–020 Recommended Solder Alloys: Alloy Composition Solidus Liquidous In50 50 In, 50 Pb 180°C 209°C In52 52 In, 48 Sn 118°C 118°C Sn62 62.5 Sn, 36.1 Pb, 1.4 Ag 179°C 179°C Sn63 63 Sn, 37 Pb 183°C 183°C Pb-free 95.5 Sn, 3.8 Ag, 0.7 Cu 217°C 217°C Hi-Temp 5 Sn, 93.5 Pb, 1.5 Ag 296°C 301°C Sn5 5 Sn, 95 Pb 308°C 312°C © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com C1082_C0G_CBR_0505 • 7/9/2019 9 Ultra HiQ-CBR Squared Series, C0G Dielectric, Low ESR 250 VDC, 1 MHz – 50 GHz (RF & Microwave) Table 4 – Performance & Reliability: Test Methods & Conditions Stress Terminal Strength Vibration Resistance Solderability Board Flex Resistance to Soldering Heat Test or Inspection Method Pressurizing force: 0505 case sizes: 5N Requirements No visible damage or separation of termination system. Test time: 10±1 second Vibration frequency: 10 ~ 55 Hz/minimum Total amplitude: 1.5 mm Test time: 6 hours (Two hours each in three mutually perpendicular directions.) Solder temperature: 235±5°C Dipping time: 2±0.5 seconds Capacitor is mounted to a substrate which is flexed by means of ram at a rate of 1 mm per second until the deflection becomes 1 mm. (Deflection is maintained for 5±1 second) Store at room temperature for 24±2 hours before measuring electrical properties. Solder temperature: 260±5°C Dipping time: 10±1 second Preheating: 120 to 150°C for 1 minute before immerse the capacitor in a eutectic solder. Store at room temperature for 24±2 hours before measuring electrical properties. No visible damage. Capacitance change and Q/DF: To meet initial specification 95% minimum coverage of termination finish. No visible damage. Capacitance change: within ±5.0% or ±0.5 pF, whichever is larger. (Capacitance change is monitored during flexure.) No visible damage. Capacitance change: within ±2.5% or ±0.25 pF, whichever is larger. Q/DF, IR and dielectric strength: To meet initial requirements. 25% maximum leaching on each edge. 5 cycles of steps 1 – 4: Temperature Cycling Step Temperature (ºC) Time (minutes) 1 Minimum operating temperatue +0/−3 Room temperature Maximum operating temperature +3/−0 Room temperature (25ºC) 30±3 2 3 4 2~3 30±3 No visible damage. Capacitance change: within ±2.5% or ±0.25 pF, whichever is larger. Q/DF, IR and dielectric strength: To meet initial requirements. 2~3 Store at room temperature for 24±2 hours before measuring electrical properties. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com C1082_C0G_CBR_0505 • 7/9/2019 10 Ultra HiQ-CBR Squared Series, C0G Dielectric, Low ESR 250 VDC, 1 MHz – 50 GHz (RF & Microwave) Table 4 – Performance & Reliability: Test Methods & Conditions cont. Stress Test or Inspection Method Humidity (Damp Heat) Steady State Test temperature: 40±2°C Humidity: 90 ~ 95% RH Test time: 500 +24/−0 hours Store at room temperature for 24±2 hours before measuring electrical properties. Humidity (Damp Heat) Load Test temperature: 40±2°C Humidity: 90 ~ 95% RH Test time: 500 +24/−0 hours Applied voltage: rated voltage Store at room temperature for 24±2 hours before measuring electrical properties. High Temperature Life Test temperature: 125±3°C Applied voltage: 200% of rated voltage (6.3 VDC – 250 VDC) Test time: 1,000 +24/−0 hours Store at room temperature for 24±2 hours before measuring electrical properties. Requirements No visible damage. Capacitance change: within ±5.0% or ±0.5 pF, whichever is larger. Q/DF value: Capacitance ≥ 30 pF, Q ≥ 350, 10 pF ≤ Capacitance < 30 pF, Q ≥ 275 +2.5°C Capacitance < 10 pF; Q ≥ 200 +10ºC IR: ≥ 1GΩ No visible damage. Capacitance change: within ±7.5% or ±0.75 pF, whichever is larger. Q/DF value: Capacitance ≥ 30 pF, Q ≥ 200, Capacitance < 30 pF, Q ≥ 100+10/3ºC IR: ≥ 500MΩ No visible damage. Capacitance change: within ±3.0% or ±0.3 pF, whichever is larger. Q/DF value: Capacitance ≥ 30 pF, Q ≥350, 10 pF ≤ Capacitance < 30 pF, Q ≥ 275 +2.5°C Capacitance