EMI Cores
ESD-FPD-1 Series Split Cores with Plastic Clamp
for Flat Cables for High Frequency (Bare)
Overview
Applications
The KEMET ESD-FPD-1 Series split cores are designed
for use on flat cables. A wide range of Nickel Zinc (NiZn)
options allow for targeting of specific high frequency
ranges. Each product features two core parts and two nylon
clamps.
• Office equipment
• Home appliances
• Inkjet printers
• Consumer electronics
• Industrial equipment
• Test and measurement equipment
• Medical equipment
• Audio-visual equipment
EMI cores are part of a family of passive components which
address the issues of noise or electromagnetic interference
(EMI) in circuits or systems.
Benefits
• NiZn ≤ 300 MHz (FM band range) options available
• Split construction
• Easy to install through its clamp mecanism
• Quick solution for post-cable assembly noise issue
• Nylon clamp
Each part number includes two ferrite parts and two clamps, as shown in the picture.
Part Number System
ESD-
FPD-
16-
1
Series
Form Type
Applicable Cable
Clamp Type
ESD-
Split
xx = xx Core
1 = Nylon clamp
One world. One KEMET
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
E5008_ESD-FPD-1 • 3/31/2020
1
EMI Core – ESD-FPD-1 Series Split Cores with Plastic Clamp for Flat Cables for High Frequency (Bare)
Core Material and Effective Frequency Range
There are two ferrite material options for KEMET
EMI Cores: Nickel-Zinc (NiZn) and Manganese
Zinc (MnZn). Each core material has a different
resistance and effective frequency range. The
MnZn core material has a lower resistance
compared to the NiZn; therefore, adequate
insulation is required before use.
It is recommended to measure the actual
frequency range effectiveness in the target
application.
1,000
AM band range
Impedance (Ω)
The NiZn core material is typically effective for
frequencies in the MHz band range such as the
FM-band, while the MnZn core material is typically
effective for the kHz band range such as the AMband. See Figure 1.
Figure 1 – Effective band range of Mn-Zn and Ni-Zn ferrite core material.
(Representative example, measured with same-dimension ring core)
FM band range
Ni-Zn series core
100
Mn-Zn series core
10
1
0.01
0.1
1
10
100
1,000
Frequency (MHz)
Environmental Compliance
All KEMET EMI cores are RoHS compliant.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
E5008_ESD-FPD-1 • 3/31/2020
2
EMI Core – ESD-FPD-1 Series Split Cores with Plastic Clamp for Flat Cables for High Frequency (Bare)
Magnetic Permeability of Ferrite Material
In order to achieve most efficient noise reduction, it is important to select the material according to the target frequency
band. Depending on its magnetic permeability, a particular ferrite material will be effective in a certain frequency band.
A schematic representation of the relationship between the magnetic permeability of each material and the corresponding
effective band range is shown in Figure 1. Materials with higher magnetic permeability are effective in the lower frequency
range, while those with lower magnetic permeability are effective in the higher frequency range. Thus, Mn-Zn products are
mainly used for reducing conduction noise, while Ni-Zn products are commonly used for radiation noise countermeasures.
The effective frequency range varies depending on core shape, size and number of windings. This frequency dependence
of the magnetic permeability as shown in the figure serves for reference purposes only and it should be tested on the actual
device to determine its effectiveness.
S18H, S15H, 10H, 7H, 5H, 1400L and 700L are KEMET’s proprietary ferrite material names.
Other materials can also be available on request.
Figure 2 - Relationship between the magnetic permeability of each material and its effective frequency range
20,000
Higher magnetic permeability:
Higher noise suppression effect
in the lower frequency range
Mn-Zn Series
Magnetic Permeability
S18H
S15H
10H
10,000
Lower magnetic permeability:
Higher noise suppression effect
in the higher frequency range
7H
5H
Ni-Zn Series
0
10 kHz
1400L
700L
100 kHz
1 MHz
10 MHz
100 MHz
1 GHz
Effective Frequency Range
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
E5008_ESD-FPD-1 • 3/31/2020
3
EMI Core – ESD-FPD-1 Series Split Cores with Plastic Clamp for Flat Cables for High Frequency (Bare)
Dimensions – Millimeters
Core
Clamp (Black nylon with cable stopper)
See Table 1 for dimensions
Installation Example
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
E5008_ESD-FPD-1 • 3/31/2020
4
EMI Core – ESD-FPD-1 Series Split Cores with Plastic Clamp for Flat Cables for High Frequency (Bare)
Performance Characteristics
Item
Performance Characteristics
Operating temperature
Frequency range
Outer length
Outer width
Inner length
Inner width
Thickness
Type
Material
−25°C to +85°C
High Frequency
37.0 – 80.0 mm
10.0 mm
25.4 – 68.6 mm
2.0 – 2.6 mm
12.7 mm
Bare with nylon clamp
NiZn 700L
Table 1 – Ratings & Part Number Reference
Part
Number
ESD-FPD-16-1
ESD-FPD-34-1
ESD-FPD-40-1
ESD-FPD-50-1
1
Dimensions (mm)
Weight
A
B
C
D
E
(g)
37.0 ±1.0
60.0 ±1.0
68.0 ±1.0
80.0 ±1.0
25.4 ±1.0
48.3 ±1.0
56.0 ±1.0
68.6 ±1.0
10.0 ±2.0
10.0 ±2.0
10.0 ±2.0
10.0 ±2.0
12.7 ±1.0
12.7 ±1.0
12.7 ±1.0
12.7 ±1.0
2.6 ±1.0
2.0 ±1.0
2.0 ±1.0
2.0 ±1.0
23.84
34.54
39.34
44.74
Applicable
Cable
16 Core
34 Core
40 Core
50 Core
Frequency Range1
Material
≤ 300 MHz
(FM band range)
MnZN
NiZn
X
X
X
X
–
–
–
–
700L
700L
700L
700L
Frequency range is for reference only. Please test with actual device before use.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
E5008_ESD-FPD-1 • 3/31/2020
5
EMI Core – ESD-FPD-1 Series Split Cores with Plastic Clamp for Flat Cables for High Frequency (Bare)
Impedance vs. Frequency
Packaging
Part Number
ESD-FPD-16-1
ESD-FPD-34-1
ESD-FPD-40-1
ESD-FPD-50-1
Packaging Type
Tray
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Pieces per Box
800
250
240
E5008_ESD-FPD-1 • 3/31/2020
6
EMI Core – ESD-FPD-1 Series Split Cores with Plastic Clamp for Flat Cables for High Frequency (Bare)
Handling Precautions
EMI Cores should be stored in normal working environments. While the EMI Cores themselves are quite robust in other
environments, avoid exposure to high temperatures, high humidity, corrosive atmospheres and long term storage for case,
snap-on and split types.
KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 75%
relative humidity. Atmospheres should be free of chlorine, sulfur and alkali bearing compounds. Avoid also storage near
strong magnetic fields as this might magnetize the product.
Temperature fluctuations should be minimized to avoid condensation or cracks on the parts. Mechanical shocks can bring
to cracks as well.
Export Control
For customers in Japan
For products that are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license
specified by the law is required for export.
For customers outside Japan
EMI Core products should not be used or sold for use in the development, production, stockpiling or utilization of any
conventional weapons or mass-destructive weapons (nuclear weapons, chemical or biological weapons, or missiles), or any
other weapons.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
E5008_ESD-FPD-1 • 3/31/2020
7
EMI Core – ESD-FPD-1 Series Split Cores with Plastic Clamp for Flat Cables for High Frequency (Bare)
KEMET Electronics Corporation Sales Offices
For a complete list of our global sales offi ces, please visit www.kemet.com/sales.
Disclaimer
All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no
obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or
property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
When providing KEMET products and technologies contained herein to other countries, the customer must abide by the procedures and provisions stipulated in all
applicable export laws and regulations, including without limitation the International Traffi c in Arms Regulations (ITAR), the US Export Administration Regulations
(EAR) and the Japan Foreign Exchange and Foreign Trade Act.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
E5008_ESD-FPD-1 • 3/31/2020
8