F862FN225K310ZLH0J

AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions - F862, Class X2, 310 VAC (Automotive Grade) Overview Applications The F862 is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box material recognized by UL 94 V–0. The F862 Series is ideal for harsh environmental conditions and meets the demanding Automotive Electronics Council's AEC–Q200 qualification requirements. Typical applications include connection in series with the mains, capacitive power supplies and energy meters, with special emphasis in automotive applications for severe ambient conditions. Benefits • Approvals: ENEC, UL, cUL, CQC • THB Grade IIB: 85°C, 85% RH, 500 hours at URAC acc. to IEC 60384-14 (not for Halogen-Free variant) • Rated voltage: 310 VAC 50/60 Hz • Capacitance range: 0.1 – 4.7 µF • Lead spacing: 15.0 – 27.5 mm • Capacitance tolerance: ±20%, ±10% • Climatic category: 40/110/56, IEC 60068–1 • Tape & Reel in accordance with IEC 60286–2 • RoHS compliant and lead-free terminations • Operating temperature range of −40˚C to +110˚C • 100% screening factory test at 1,900 VDC • Qualification based on AEC–Q200 guidelines Simulator Tool and Lifetime Expectancy model available online: K-SIM K-LEM Part Number System F 862 B C 104 Capacitor Class Series Lead Spacing (mm) Size Code Capacitance Code (pF) F = Film X2, Metallized Polypropylene B = 15 D = 22.5 F = 27.5 See Dimension Table First two digits represent significant figures. Third digit specifies number of zeros. M 310 Capacitance Voltage (VAC) Tolerance K = ±10% M = ±20% 310 C V054 Packaging C-Spec See Ordering Options Table V054 = Standard Blank = Halogenfree, green box Built Into Tomorrow © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3092_F862_X2_310 • 7/14/2022 1 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitorsfor Harsh Environmental Conditions F862, Class X2, 310 VAC (Automotive Grade) Ordering Options Table Lead Spacing Nominal (mm) Type of Leads and Packaging Lead Length (mm) Lead and Packaging Code 4+2/−0 Z 3.2 +0.3/−0.2 25 +5/−0 H0 = 18.5 ±0.5 ZL32K ALR0L R 4 +2/−0 17 +0/−1 Z ZLH0J 3.2 +0.3/−0.2 25 +5/−0 H0= 18.5±0.5 ZL32K ZLR0L R 4 +2/−0 17 +0/−1 3.2 +0.3/−0.2 Z ZLH0J ZL32K Standard Lead and Packaging Options Pizza Pack 15 Other Lead and Packaging Options Pizza – Short Leads Bulk (Bag) – Maximum Length Leads Ammo Pack Standard Lead and Packaging Options Pizza Pack Pizza Pack – Long Leads 22.5 Other Lead and Packaging Options Pizza – Short Leads Pizza Pack – Max Length Leads Ammo Pack Standard Lead and Packaging Options 27.5 Pizza Pack Pizza – Long Leads Pizza – Short Leads © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3092_F862_X2_310 • 7/14/2022 2 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitorsfor Harsh Environmental Conditions F862, Class X2, 310 VAC (Automotive Grade) Dimensions – Millimeters FRONT VIEW SIDE VIEW L T H S 0.5 LL F Size Code BG BK BP BS BY BZ DB DI DJ DO DP DU FC FI FN FS FY S T H L F Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 6.0 7.5 8.5 10.0 11.0 12.0 6.0 7.0 8.5 10.0 11.0 13.0 11.0 13.0 14.0 19.0 22.0 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 12.0 13.5 14.5 16.0 19.0 20.0 14.5 16.0 17.0 18.5 20.0 22.0 20.0 25.0 28.0 29.0 37.0 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 18.0 18.0 18.0 18.0 18.0 18.0 26.0 26.0 26.0 26.0 26.0 26.0 31.5 31.5 31.5 31.5 31.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 Note: See Ordering Options Table for lead length (LL/H 0) options. Qualification Automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AEC–Q200, Stress Test Qualification for Passive Components. For additional information regarding the Automotive Electronics Council and AEC–Q200, please visit their website at www.aecouncil.com. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3092_F862_X2_310 • 7/14/2022 3 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitorsfor Harsh Environmental Conditions F862, Class X2, 310 VAC (Automotive Grade) Performance Characteristics Rated Voltage 310 VAC 50/60 Hz Capacitance Range 0.1 – 4.7 µF Capacitance Tolerance ±20%, ±10% Temperature Range Climatic Category Storage Conditions Approvals −40°C to +110°C 40/110/56 Storage time: ≤ 24 months from the date marked on the label package Average relative humidity per year ≤ 70% RH ≤ 85% for 30 days randomly distributed throughout the year Dew is absent Temperature: −40 to 80°C (see "Maximum Humidity in Storage Conditions" graph below) ENEC, UL, cUL, CQC Maximum Values at +23°C Dissipation Factor 1 kHz Test Voltage Between Terminals C ≤ 0.1 µF C > 0.1 µF 0.3% 0.2% The 100% screening factory test is carried out at 1,900 VDC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. It is not permitted to repeat this test as there is a risk of damage to the capacitor. KEMET is not liable in such case for any failures. Minimum Values Between Terminals Insulation Resistance In DC Applications C ≤ 0.33 µF ≥ 30,000 MΩ C > 0.33 µF ≥ 10,000 MΩ • µF Recommended voltage ≤ 630 VDC © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3092_F862_X2_310 • 7/14/2022 4 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitorsfor Harsh Environmental Conditions F862, Class X2, 310 VAC (Automotive Grade) Performance Characteristics cont. Maximum Humidity in Storage Condition 100 90 80 70 60 50 40 30 20 10 0 −40 Maximum Irms vs. Th Relative Humidity (%) 120% Maximum Irms 100% 30 Days Annual Average 80% 60% 40% 20% −20 0 20 40 Temperature (°C) 60 80 0% 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 Temperature Th(°C) Maximum Overtemperature ∆Tlim vs Th 25 ∆Tlim (°C) 20 15 10 5 0 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 Temperature Th(°C) Th is the maximum ambient temperature surrounding the capacitor or hottest contact point (e.g. tracks), whichever is higher, in the worst operation conditions in °C. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3092_F862_X2_310 • 7/14/2022 5 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitorsfor Harsh Environmental Conditions F862, Class X2, 310 VAC (Automotive Grade) Maximum Voltage (Vrms) Versus Frequency (Sinusoidal Waveform/Th ≤ 80°C) Lead Spacing 15 mm Lead Spacing 22.5 mm 100 100 0.1 µF 0.22 µF 0.33 µF 0.56 µF 10 1 Voltage (Vrms) 1,000 Voltage (Vrms) 1,000 0.1 1.0 0.15 µF 0.33 µF 0.47 µF 0.68 µF 1.0 µF 1.2 µF 10 Frequency (kHz) 10.0 100.0 1 0.1 1.0 Frequency (kHz) 10.0 100.0 Lead Spacing 27.5 mm 1,000 Voltage (Vrms) 100 1 1.5 2.2 3.3 4.7 10 1 0.1 µF µF µF µF µF 1.0 Frequency (kHz) 10.0 100.0 All the curves are evaluated in accordance to the datasheet declarations and considering an environmental condition as Dry Condition. If your environment is too harsh in terms of temperature and relative humidity, please contact KEMET for any kind of information. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3092_F862_X2_310 • 7/14/2022 6 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitorsfor Harsh Environmental Conditions F862, Class X2, 310 VAC (Automotive Grade) Maximum Current (Arms) Versus Frequency (Sinusoidal Waveform/Th ≤ 80°C) Lead Spacing 15 mm Lead Spacing 22.5 mm 1 1 0.1 µF 0.22 µF 0.33 µF 0.56 µF 0.1 0.01 Current (Arms) 10 Current (Arms) 10 0.1 1.0 Frequency (kHz) 10.0 0.15 µF 0.33 µF 0.47 µF 0.68 µF 1.0 µF 1.2 µF 0.1 100.0 0.01 0.1 1.0 Frequency (kHz) 10.0 100.0 Lead Spacing 27.5 mm 10 Current (Arms) 1 1 1.5 2.2 3.3 4.7 0.1 0.01 0.1 1.0 Frequency (kHz) 10.0 µF µF µF µF µF 100.0 All the curves are evaluated in accordance to the datasheet declarations and considering an environmental condition as Dry Condition. If your environment is too harsh in terms of temperature and relative humidity, please contact KEMET for any kind of information. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3092_F862_X2_310 • 7/14/2022 7 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitorsfor Harsh Environmental Conditions F862, Class X2, 310 VAC (Automotive Grade) Impedance Graph 100 10 Z [Ω] 1 0.10 µF p. 15 0.33 µF p. 22.5 1 µF p. 27.5 0.1 0.01 0.001 0.1 1 Frequency (MHz) 10 100 Environmental Test Data Test Publication Procedure Endurance IEC 60384–14 1.25 x VR VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1 second, 1,000 hours at upper rated temperature Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s2 Bump IEC 60068–2–29 Test Eb 1,000 bumps at 390 m/s2 Temperature Cycling JESD22–MethodJA–104 1,000 cycles (−55°C to 85°C) Note: If 100°C or 125°C part the 1,000 cycles will be at that temperature rating. Measurement at 24 ±4 hours after test conclusion. 30 minute maximum dwell time at each temperature extreme. 1 minute maximum transition time. Active Flammability IEC 60384–14 VR + 20 surge pulses at 2.5 kV (pulse every 5 seconds) Passive Flammability IEC 60384–14 IEC 60384–1, IEC 60695–11–5 Needle-flame test Biased Humidity MIL–STD–202 Method 103 1,000 hours 40°C/93%RH. Rated voltage. Measurement at 24 ±2 hours after test conclusion. 85°C, 85% RH and 240 VAC, 1,000 hours Capacitance change (∆C/C): ≤ 10% Dissipation factor change (∆tan δ): ≤ 5 * 10−3 (at 1 kHz) Insulation resistance Rins or time constant τ = CR Rins: ≥ 50% of initial limit THB Test 1 THB Test 2 Not for halogen-free variant. 85°C, 85% RH and 310 VAC, 500 hours Capacitance change (∆C/C): ≤ 10% Dissipation factor change (∆tan δ): ≤ 5 * 10−3 (at 1 kHz) Insulation resistance Rins or time constant τ = CR Rins: ≥ 50% of initial limit © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3092_F862_X2_310 • 7/14/2022 8 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitorsfor Harsh Environmental Conditions F862, Class X2, 310 VAC (Automotive Grade) Approvals Certification Body Mark Specification File Number IMQ S.p.A. EN/IEC 60384–14 CA08.00203 UL UL 60384–14 and CAN/CSA– E60384–14 E97797 IEC 60384–14 CQC17001166651 CQC17001166767 CQC17001167225 CQC17001167220 CQC17001166886 CQC17001167231 CQC Environmental Compliance All KEMET EMI capacitors in green boxes are RoHS compliant and Halogen-Free. With C-Spec V054 All KEMET EMI capacitors are RoHS compliant. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3092_F862_X2_310 • 7/14/2022 9 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitorsfor Harsh Environmental Conditions F862, Class X2, 310 VAC (Automotive Grade) Table 1 – Ratings & Part Number Reference Capacitance Value (µF) Size Code 0.1 0.15 0.22 0.33 0.39 0.47 0.56 0.15 0.22 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.0 1.5 2.2 3.3 4.7 Capacitance Value (µF) Dimensions in mm Lead Spacing (p) dV/dt (V/µs) Part Number 18.0 18.0 18.0 18.0 18.0 18.0 18.0 26.0 26.0 26.0 26.0 26.0 26.0 26.0 26.0 26.0 26.0 31.5 31.5 31.5 31.5 31.5 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 400 400 400 400 400 400 400 200 200 200 200 200 200 200 200 200 200 150 150 150 150 150 F862BK104(1)310(2) V054 F862BK154(1)310(2) V054 F862BP224(1)310(2) V054 F862BS334(1)310(2) V054 F862BS394(1)310(2) V054 F862BY474(1)310(2) V054 F862BZ564(1)310(2) V054 F862DB154(1)310(2) V054 F862DI224(1)310(2) V054 F862DJ334(1)310(2) V054 F862DJ394(1)310(2) V054 F862DO474(1)310(2) V054 F862DO564(1)310(2) V054 F862DP684(1)310(2) V054 F862DP824(1)310(2) V054 F862DU105(1)310(2) V054 F862DU125(1)310(2) V054 F862FC105(1)310(2) V054 F862FI155(1)310(2) V054 F862FN225(1)310(2) V054 F862FS335(1)310(2) V054 F862FY475(1)310(2) V054 L (mm) Lead Spacing (p) dV/dt (V/µs) Part Number T H L BK BK BP BS BS BY BZ DB DI DJ DJ DO DO DP DP DU DU FC FI FN FS FY 7.5 7.5 8.5 10.0 10.0 11.0 12.0 6.0 7.0 8.5 8.5 10.0 10.0 11.0 11.0 13.0 13.0 11.0 13.0 14.0 19.0 22.0 13.5 13.5 14.5 16.0 16.0 19.0 20.0 14.5 16.0 17.0 17.0 18.5 18.5 20.0 20.0 22.0 22.0 20.0 25.0 28.0 29.0 37.0 Size Code T (mm) H (mm) (1) M = ±20%, K = ±10%. (2) Insert lead and packaging code. See Ordering Options Table for available options. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3092_F862_X2_310 • 7/14/2022 10 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitorsfor Harsh Environmental Conditions F862, Class X2, 310 VAC (Automotive Grade) Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221°C for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170°C). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 – 15 mm), and great care has to be taken during soldering. The recommended solder profiles from KEMET should be used. Please consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760–1 Edition 2 serves as a solid guideline for successful soldering. Please see Figure 1. Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the above the recommended limits may result to degradation or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through-hole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle. Wave Soldering Recommendations Manual Soldering Recommendations Following is the recommendation for manual soldering with a soldering iron. 300 Second Wave First Wave Recommended Soldering Temperature 200 Temperature (°C) 400 350 Soldering Iron Bit Temperature (°C) 2+3 seconds max 260°C 250 300 250 ∆ T < 150°C Cooling Preheating 150 ca. 2°C/second ca. 3.5°C/second typical ca. 5°C/second Tpreheat 100 Typical 200 50 150 100 0 50 0 40 80 120 160 200 240 Time (seconds) 0 0 1 2 3 4 5 6 7 8 Soldering Time (seconds) The soldering iron tip temperature should be set at 350°C (+10°C maximum), with the soldering duration not to exceed more than 3 seconds. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3092_F862_X2_310 • 7/14/2022 11 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitorsfor Harsh Environmental Conditions F862, Class X2, 310 VAC (Automotive Grade) Soldering Process cont. Wave Soldering Recommendations cont. 1. The table indicates the maximum set-up temperature of the soldering process Figure 1. Dielectric Film Material Maximum Preheat Temperature Maximum Peak Soldering Temperature Capacitor Capacitor Capacitor Capacitor Pitch Pitch Pitch Pitch ≤ 15 mm > 15 mm ≤ 15 mm > 15 mm Polyester 130°C 130°C 270°C 270°C Polypropylene 110°C 130°C 260°C 270°C Paper 130°C 140°C 270°C 270°C Polyphenylene Sulphide 150°C 160°C 270°C 270°C 2. The maximum temperature measured inside the capacitor: Set the temperature so that inside the element the maximum temperature is below the limit: Dielectric Film Material Maximum temperature measured inside the element Polyester 160°C Polypropylene 110°C Paper 160°C Polyphenylene Sulphide 160°C Temperature monitored inside the capacitor. Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as in normal flow soldering without touching the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected components, and pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document, however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than in double wave flow soldering, and great care must be taken so that the parts are not overheated. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3092_F862_X2_310 • 7/14/2022 12 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitorsfor Harsh Environmental Conditions F862, Class X2, 310 VAC (Automotive Grade) Mounting Resistance to Vibration and Mechanical Shock AEC-Q200 Mechanical Stress Tests: Mechanical Shock Vibration MIL-SDT-202 Method 213 Test condition C Peak value 100 g, duration 6 ms, half-sine-wave (see MIL-HDBK for details) MIL-SDT-202 Method 204 5 g for 20 minutes, 12 cycles each of 3 orientations Use 8"X5" PCB, 0.031" thick. 7 secure points on one 8" side and 2 secure points at corners of opposite sides. Parts mounted within 2" from any secure point. Test from 10 – 2,000 Hz. The capacitors are designed for PCB mounting. The stand-off pipes must be in good contact with the printed circuit board. The capacitors with pitch ≤ 22.5 mm can be mechanically fixed by the leads, for pitch > 22.5 mm, the capacitor body has to be properly fixed (e.g. clamped or glued). Construction Molded Plastic Case Single-sided Metallized Polypropylene Film (First Layer) Detailed Cross Section Molded Plastic Self-Extinguishing Case Resin Single-sided Metallized Polypropylene Film (Second Layer) Margin Margin Metal Contact Layer Metal Contact Layer Margin FILM WINDING SCHEME OPTIONS Leads Single-sided Metallized Polypropylene Film Double-sided Winding Scheme Single-sided Metallized Polypropylene Film 1 Section Single-sided Metallized Polypropylene Film Double-sided Metallized Polyester Carrier Film 2 Sections 1 Section © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Single-sided Metallized Polyprop Film Diel Single-sided Metallized F3092_F862_X2_310 • 7/14/2022 Double-sided Metallized 13 Polypropy Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitorsfor Harsh Environmental Conditions F862, Class X2, 310 VAC (Automotive Grade) Marking FRONT TOP Approval Marks Rated Voltage Series & Safety Class Manufacturing Plant Code Manufacturer’s Logo Manufacturing Date Code IEC Climatic Category Capacitance Capacitance Tolerance Passive Flammability Category: B for volume ≥ 1750 mm3 C for volume < 1750 mm3 OR FRONT Approval Marks Series & Safety Class Manufacturer’s Logo Rated Voltage Capacitance IEC Climatic Category TOP Manufacturing Date Code Passive Flammability Category: B for volume ≥ 1750 mm3 C for volume < 1750 mm3 Capacitance Tolerance Manufacturing Plant Code © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3092_F862_X2_310 • 7/14/2022 14 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitorsfor Harsh Environmental Conditions F862, Class X2, 310 VAC (Automotive Grade) Manufacturing Date Code (IEC–60062) Y = Year, Z = Month Year 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 Code A B C D E F H J K L M N Year 2022 2023 2024 2025 2026 2027 2028 2029 2030 Code P R S T U V W X A Month January February March April May June July August September October November December Code 1 2 3 4 5 6 7 8 9 O N D Packaging Quantities Size Code BG BK BP BS BY BZ DB DI DJ DO DP DU FC FI FN FS FY Lead Spacing Thickness (mm) Height (mm) Length (mm) 15 6 7.5 8.5 10 11 12 12 13.5 14.5 16 19 20 18 18 18 18 18 18 1,750 1,000 1,000 750 450 350 22.5 6 7 8.5 10 11 13 14.5 16 17 18.5 20 22 26 26 26 26 26 26 805 700 450 360 300 230 27.5 11.0 13.0 14.0 19.0 22.0 20.0 25.0 28.0 29.0 37.0 31.5 31.5 31.5 31.5 31.5 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Bulk Bulk Short Leads Long Leads Ammo Pizza 1,000 800 650 550 400 300 680 500 440 380 340 330 935 748 663 561 510 459 450 450 350 350 200 150 464 380 280 235 217 200 660 564 468 396 360 300 300 250 230 170 150 F3092_F862_X2_310 • 7/14/2022 15 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitorsfor Harsh Environmental Conditions F862, Class X2, 310 VAC (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) Lead Spacing 5 mm ∆p Lead Spacing 7.5 mm ∆p ∆h H1 W2 F H0 P1 ∆p W0 W1 W W D0 P1 ∆p ∆h t P0 ∆p ∆h H1 W0 W1 P1 ∆p ∆h W2 F H0 D0 P0 Lead Spacing 22.5 – 27.5 mm Lead Spacing 10 – 15 mm H1 ∆h W2 F H0 t ∆p ∆h H1 W0 W1 P0 ∆p ∆h W2 F H0 W0 W1 W D0 P0 P1 ∆h W D0 t t Taping Specification Dimensions in mm Lead Spacing Standard IEC 60286–2 +0.6/−0.1 F 5.0 7.5 10.0 15.0 22.5 27.5 +1/−0.5 W 18.0 18.0 18.0 18.0 18.0 18.0 Minimum W0 6.0 6.0 9.0 10.0 10.0 10.0 Position of Sprocket Hole ±0.5 W1 9.0 9.0 9.0 9.0 9.0 9.0 9+0.75/−0.5 Distance Between Tapes Maximum W2 3.0 3.0 3.0 3.0 3.0 3.0 3.0 Sprocket Hole Diameter ±0.2 D0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 Carrier Tape Width Hold-Down Tape Width 18 12.7 12.7 12.7 12.7 12.7 12.7 12.7 ±0.7 P1 3.85 3.75 7.7 5.2 7.8 5.3 P1 Maximum ∆p 1.3 1.3 1.3 1.3 1.3 1.3 1.3 Lateral Deviation ±2 ∆h 2.0 2.0 2.0 2.0 2.0 2.0 2.0 Total Thickness ±0.2 t 0.7 0.7 0.7 0.7 0.9MAX 0.9MAX 0.9MAX Sprocket Hole/Cap Body ±0.5 H0 18.5 18.5 18.5 18.5 18.5 18.5 18 +2/−0 Feed Hole Lead Spacing Distance Lead – Feed Hole Deviation Tape – Plane ±0.2 (1) P0 F +1/−0.5 (3) (2) ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 (1) Maximum cumulative feed hole error, 1 mm per 20 parts. (2) 16.5 mm available on request. (3) 15 mm available on request (F ≥ 10 mm). © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3092_F862_X2_310 • 7/14/2022 16 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitorsfor Harsh Environmental Conditions F862, Class X2, 310 VAC (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) cont. Ammo Specifications Dimensions (mm) Series R4x, R4x+R, R7x, RSB F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx H W T 360 340 59 330 330 50 H T Reel Specifications W Dimensions (mm) Series R4x, R4x+R, R7x, RSB F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx D H W 355 500 30 25 55 (Max) 360 500 30 46 (Max) D Manufacturing Date Code (IEC–60062) H W Y = Year, Z = Month Year 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 Code A B C D E F H J K L M N P R S T U V W X A Month January February March April May June July August September October November December Code 1 2 3 4 5 6 7 8 9 O N D © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3092_F862_X2_310 • 7/14/2022 17 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitorsfor Harsh Environmental Conditions F862, Class X2, 310 VAC (Automotive Grade) KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3092_F862_X2_310 • 7/14/2022 18