F873DP104M760L

AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitors − F873, Class X1, 760 VAC Overview Applications Metallized polypropylene film encapsulated with self− extinguishing resin in a box of material recognized to UL 94 V–0. For worldwide use as electromagnetic interference (EMI) suppression filter in across−the−line applications requiring X1 safety classification. Benefits • Approvals: ENEC, UL, cUL, CQC • Rated voltage: 760 VAC 50/60 Hz • Capacitance range: 0.01 – 1.8 µF • Lead spacing: 22.5 – 37.5 mm • Capacitance tolerance: ±20%, ±10% • Climatic category 40/110/56, IEC 60068–1 • Tape & Reel in accordance with IEC 60286–2 • RoHS Compliant and lead−free terminations • Operating temperature range of −40°C to +110°C • 100% screening factory test at 4,250 VDC Part Number System F 873 D U 104 M 760 C Capacitor Class Series Lead Spacing (mm) Size Code Capacitance Code (pF) Capacitance Tolerance Voltage (VAC) Packaging F = Film X1, Metallized Polypropylene 760 See Ordering Options Table D = 22.5 F = 27.5 R = 37.5 See Dimension Table First two digits represent significant figures. Third digit specifies number of zeros. K = ±10% M = ±20% Built Into Tomorrow © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3004_F873_X1_760 • 9/20/2023 1 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitors - F873, Class X1, 760 VAC Ordering Options Table Lead Spacing Nominal (mm) Type of Leads and Packaging Lead Length (mm) Lead and Packaging Code 17+0/−1 4+2/−0 ZLH0J Z H0= 18.5±0.5 H0= 18.5±0.5 H0= 18.5±0.5 L P R 17+0/−1 4+2/−0 ZLH0J Z 17+0/−1 4+2/−0 ZLH0J Z Standard Lead and Packaging Options Pizza – Long Leads Pizza Pack 22.5 Other Lead and Packaging Options Tape & Reel (Standard Reel) Tape & Reel (Large Reel) Ammo Pack Standard Lead and Packaging Options 27.5 Pizza – Long Leads Pizza Pack Standard Lead and Packaging Options 37.5 Pizza – Long Leads Pizza Pack © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3004_F873_X1_760 • 9/20/2023 2 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitors - F873, Class X1, 760 VAC Dimensions – Millimeters FRONT VIEW SIDE VIEW L T H S 0.5 LL F Size Code DB DI DH DJ DM DO DP DU DY FB FC FI FN FO FR FS FY FH FQ FT RB RF RH RC RD RP RO RU RV RW Version High Profile Low Profile Low Profile Low Profile Low Profile Low Profile S T H L F Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 6.0 7.0 8.0 8.5 9.0 10.0 11.0 13.0 15.5 9.0 11.0 13.0 14.0 17.0 17.5 19.0 22.0 21.0 27.5 31.0 11.0 13.0 15.0 16.0 19.0 21.0 24.0 30.0 24.0 24.0 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 14.5 16.0 16.0 17.0 18.5 18.5 20.0 22.0 24.5 17.0 20.0 25.0 28.0 40.0 28.0 29.0 37.0 12.5 16.0 19.0 22.0 24.0 26.0 28.5 32.0 38.0 44.0 45.0 15.0 19.0 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 26.0 26.0 26.0 26.0 26.0 26.0 26.0 26.0 26.0 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 41.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.5 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 +0/−0.7 Nominal Tolerance 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 Note: See Ordering Options Table for lead length (LL) options. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3004_F873_X1_760 • 9/20/2023 3 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitors - F873, Class X1, 760 VAC Performance Characteristics Rated Voltage Capacitance Range Capacitance Tolerance Temperature Range Climatic Category Storage Conditions Approvals 760 VAC 50/60 Hz 0.01 – 1.8 µF ±20%, ±10% –40 to +110°C 40/110/56 Storage time: ≤ 24 months from the date marked on the label package Average relative humidity per year ≤ 70% RH ≤ 85% for 30 days randomly distributed throughout the year Dew is absent Temperature: -40 to 80°C (see "Maximum Humidity in Storage Conditions" graph below) ENEC, UL, cUL, CQC Maximum Values at +23°C Dissipation Factor C ≤ 0.1 µF C > 0.1 µF 0.1% 0.1% 1 kHz Test Voltage Between Terminals The 100% screening factory test is carried out at 4,250 VDC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. It's not permitted to repeat this Test as there is a risk to damage the Capacitor. KEMET is not liable in such case for any failures Measured at +25°C ±5°C, according to IEC 60384-2 Minimum Values Between Terminals Insulation Resistance In DC Applications Voltage Charge Voltage Charge time C ≤ 0.33 μF C > 0.33 μF 100 VDC 1 minute ≥ 3 • 104 MΩ ≥ 10,000 MΩ • µF Recommended Voltage ≤ 1,500 VDC Maximum Humidity in Storage Condition Relative Humidity (%) 100 90 80 70 60 50 40 30 20 10 0 −40 30 Days Annual Average −20 0 20 40 Temperature (°C) 60 80 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3004_F873_X1_760 • 9/20/2023 4 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitors - F873, Class X1, 760 VAC Impedance Graph 100 10 Z[Ω] 1 0.1 0.01 0.001 0.1 1 F [MHz] 10 100 Environmental Test Data Test IEC Publication Procedure Endurance IEC 60384–14 1.25 x VR VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1 second, 1,000 hours at upper rated temperature Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s2 Bump IEC 60068–2–29 Test Eb 1,000 bumps at 390 m/s2 Change of Temperature IEC 60068–2–14 Test Na Upper and lower rated temperature 5 cycles Active Flammability IEC 60384–14 VR + 20 surge pulses at 4 kV (pulse every 5 seconds) Passive Flammability IEC 60384–14 IEC 60384–1, IEC 60695–11–5 Needle−flame test Damp Heat Steady State IEC 60068–2–78 Test Cab © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com +40°C and 93% RH, 56 days F3004_F873_X1_760 • 9/20/2023 5 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitors - F873, Class X1, 760 VAC Approvals Certification Body Mark Specification File Number IMQ S.p.A. EN/IEC 60384–14 CA08.00188 UL UL 60384–14 and CAN/CSA–E60384–14 E97797 IEC 60384–14 CQC12001084815 CQC12001084817 CQC12001084814 CQC12001084820 CQC12001088068 CQC Environmental Compliance All new KEMET EMI capacitors are RoHS compliant and Halogen−Free. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3004_F873_X1_760 • 9/20/2023 6 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitors - F873, Class X1, 760 VAC Table 1 – Ratings & Part Number Reference Maximum Dimensions in mm Capacitance Value (µF) Size Code Lead Spacing (S) dV/dt (V/µs) Part Number T H L 0.01 0.012 0.015 0.018 0.022 0.025 0.025 0.027 0.033 0.039 0.047 0.047 0.056 0.056 0.068 0.082 0.082 0.1 0.1 0.12 0.15 0.18 0.056 0.068 0.082 0.082 0.1 0.1 0.12 0.12 0.15 0.15 0.18 0.22 0.22 0.22 0.25 0.25 0.25 0.25 DB DB DB DB DB DB DI DI DI DI DH DJ DJ DM DO DO DP DP DU DU DY DY FB FB FB FC FC FH FC FH FH FI FI FI FN FQ FN FO FQ FR 6 6 6 6 6 6 7 7 7 7 8 8.5 8.5 9 10 10 11 11 13 13 15.5 15.5 9 9 9 11 11 21 11 21 21 13 13 13 14 27.5 14 17 27.5 17.5 14.5 14.5 14.5 14.5 14.5 14.5 16 16 16 16 16 17 17 18.5 18.5 18.5 20 20 22 22 24.5 24.5 17 17 17 20 20 12.5 20 12.5 12.5 25 25 25 28 16 28 40 16 28 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 F873DB103(1)760(2) F873DB123(1)760(2) F873DB153(1)760(2) F873DB183(1)760(2) F873DB223(1)760(2) F873DB253(3)760(2) F873DI253(1)760(2) F873DI273(1)760(2) F873DI333(1)760(2) F873DI393(1)760(2) F873DH473(3)760(2) F873DJ473(1)760(2) F873DJ563(3)760(2) F873DM563(1)760(2) F873DO683(1)760(2) F873DO823(3)760(2) F873DP823(1)760(2) F873DP104(3)760(2) F873DU104(1)760(2) F873DU124(1)760(2) F873DY154(1)760(2) F873DY184(1)760(2) F873FB563(1)760(2) F873FB683(1)760(2) F873FB823(3)760(2) F873FC823(1)760(2) F873FC104(1)760(2) F873FH104(1)760(2) F873FC124(3)760(2) F873FH124(1)760(2) F873FH154(3)760(2) F873FI154(1)760(2) F873FI184(1)760(2) F873FI224(3)760(2) F873FN224(1)760(2) F873FQ224(1)760(2) F873FN254(3)760(2) F873FO254(1)760(2) F873FQ254(3)760(2) F873FR254(1)760(2) Capacitance Value (µF) Size Code T (mm) H (mm) L (mm) Lead Spacing (S) dV/dt (V/µs) Part Number (1) M = ±20%, K = ±10%. (2) Insert lead and packaging code. See table for available options. (3) M = ±20% (only available tolerance). © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3004_F873_X1_760 • 9/20/2023 7 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitors - F873, Class X1, 760 VAC Table 1 – Ratings & Part Number Reference cont. Maximum Dimensions in mm Capacitance Value (µF) Size Code Lead Spacing (S) dV/dt (V/µs) Part Number T H L 0.27 0.27 0.27 0.33 0.33 0.33 0.33 0.39 0.39 0.39 0.47 0.56 0.15 0.18 0.22 0.22 0.25 0.25 0.27 0.27 0.33 0.33 0.33 0.33 0.39 0.39 0.47 0.47 0.47 0.56 0.68 0.68 0.82 0.82 1 1.2 1.5 1.8 FO FR FT FO FR FS FT FO FS FY FY FY RB RB RB RV RF RV RF RV RF RH RV RW RC RW RC RD RW RD RD RP RO RP RO RO RU RU 17 17.5 31 17 17.5 19 31 17 19 22 22 22 11 11 11 24 13 24 13 24 13 15 24 24 16 24 16 19 24 19 19 21 24 21 24 24 30 30 40 28 19 40 28 29 19 40 29 37 37 37 22 22 22 15 24 15 24 15 24 26 15 19 28.5 19 28.5 32 19 32 32 38 44 38 44 44 45 45 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 225 225 225 225 225 225 225 225 225 225 225 225 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 F873FO274(1)760(2) F873FR274(1)760(2) F873FT274(1)760(2) F873FO334(1)760(2) F873FR334(3)760(2) F873FS334(1)760(2) F873FT334(1)760(2) F873FO394(1)760(2) F873FS394(3)760(2) F873FY394(1)760(2) F873FY474(1)760(2) F873FY564(1)760(2) F873RB154(1)760(2) F873RB184(1)760(2) F873RB224(3)760(2) F873RV224(1)760(2) F873RF254(1)760(2) F873RV254(1)760(2) F873RF274(1)760(2) F873RV274(1)760(2) F873RF334(3)760(2) F873RH334(1)760(2) F873RV334(3)760(2) F873RW334(1)760(2) F873RC394(1)760(2) F873RW394(1)760(2) F873RC474(3)760(2) F873RD474(1)760(2) F873RW474(3)760(2) F873RD564(1)760(2) F873RD684(3)760(2) F873RP684(1)760(2) F873RO824(1)760(2) F873RP824(3)760(2) F873RO105(1)760(2) F873RO125(1)760(2) F873RU155(1)760(2) F873RU185(3)760(2) Capacitance Value (µF) Size Code T (mm) H (mm) L (mm) Lead Spacing (S) dV/dt (V/µs) Part Number (1) M = ±20%, K = ±10%. (2) Insert lead and packaging code. See table for available options. (3) M = ±20% (only available tolerance). © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3004_F873_X1_760 • 9/20/2023 8 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitors - F873, Class X1, 760 VAC Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221°C for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre−heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170°C). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 – 15 mm), and great care has to be taken during soldering. The recommended solder profiles from KEMET should be used. Please consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760–1 Edition 2 serves as a solid guideline for successful soldering. Please see Figure 1. Reflow soldering is not recommended for through−hole film capacitors. Exposing capacitors to a soldering profile in excess of the above the recommended limits may result to degradation or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through−hole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through−hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle. Wave Soldering Recommendations Manual Soldering Recommendations Following is the recommendation for manual soldering with a soldering iron. 300 Second Wave First Wave Recommended Soldering Temperature 200 Temperature (°C) 400 350 Soldering Iron Bit Temperature (°C) 2+3 seconds max 260°C 250 300 250 ∆ T < 150°C Cooling Preheating 150 ca. 2°C/second ca. 3.5°C/second typical ca. 5°C/second Tpreheat 100 Typical 200 50 150 100 0 50 0 40 80 120 160 200 240 Time (seconds) 0 0 1 2 3 4 5 6 7 8 Soldering Time (seconds) The soldering iron tip temperature should be set at 350°C (+10°C maximum), with the soldering duration not to exceed more than 3 seconds. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3004_F873_X1_760 • 9/20/2023 9 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitors - F873, Class X1, 760 VAC Soldering Process cont. Wave Soldering Recommendations cont. 1. The table indicates the maximum set−up temperature of the soldering process Figure 1 Dielectric Film Material Maximum Preheat Temperature Maximum Peak Soldering Temperature Capacitor Capacitor Capacitor Capacitor Pitch Pitch Pitch Pitch ≤ 15 mm > 15 mm ≤ 15 mm > 15 mm Polyester 130°C 130°C 270°C 270°C Polypropylene 110°C 130°C 260°C 270°C Paper 130°C 140°C 270°C 270°C Polyphenylene Sulphide 150°C 160°C 270°C 270°C 2. The maximum temperature measured inside the capacitor: Set the temperature so that inside the element the maximum temperature is below the limit: Dielectric Film Material Maximum temperature measured inside the element Polyester 160°C Polypropylene 110°C Paper 160°C Polyphenylene Sulphide 160°C Temperature monitored inside the capacitor. Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through−hole components to be soldered is preheated and transported over the solder bath as in normal flow soldering without touching the solder. When the board is over the bath, it is stopped and pre−designed solder pots are lifted from the bath with molten solder only at the places of the selected components, and pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document, however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than in double wave flow soldering, and great care must be taken so that the parts are not overheated. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3004_F873_X1_760 • 9/20/2023 10 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitors - F873, Class X1, 760 VAC Construction Molded Plastic Case Single-sided Metallized Polypropylene Film (First Layer) Detailed Cross Section Molded Plastic Case Self-Extinguishing Resin Single-sided Metallized Polypropylene Film (Second Layer) Margin FILM WINDING SCHEME OPTIONS Single-sided Metallized Polypropylene Film Double-sided Margin Metal Contact Layer Single-sided Metallized Polypropylene Film 1 Section Metal Contact Layer Margin Single-sided Metallized Polypropylene Film Double-sided Metallized Polyester Carrier Film Leads 2 Sections Polyprop Film Diel 1 Section Winding Scheme Single-sided Metallized Polypropylene Film Single-sided Metallized Polypropylene Film 3 Sections 4 Sections Metallized Impregnated Paper Metallized Polyphenylene Sulfide Film (SMR) Metallized Impregnated Paper © KEMET Electronics 1 Section 1 Section Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Double-sided Metallized Polyester Carrier Film Polypropy Film Diele 3 Sections Polyp Metal Foil Polyp Film D Metallized Polyphenylene Sulfide Film with Vacuum-Evaporated Aluminum Electrodes F3004_F873_X1_760 • 9/20/2023 1 Section 11 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitors - F873, Class X1, 760 VAC Marking FRONT TOP Approval Marks Rated Voltage Series & Safety Class Manufacturing Plant Code Manufacturer’s Logo Manufacturing Date Code Capacitance Capacitance Tolerance Passive Flammability Category: B for volume ≥ 1750 mm3 C for volume < 1750 mm3 IEC Climatic Category Slight change in the layout can be possible but this does not affect the content of the information of the current marking. This change will be achieved without impact to product form, fit or function, as the products are equivalent with respect to physical, mechanical, quality and reliability characteristics Manufacturing Date Code (IEC 60062) Year Code Year Code Year Code Month Code Month Code 2020 2021 2022 2023 2024 2025 2026 M N P R S T U 2027 2028 2029 2030 2031 2032 2033 V W X A B C D 2034 2035 2036 2037 2038 2039 2040 E F G H K L M January February March April May June 1 2 3 4 5 6 July August September October November December 7 8 9 O N D © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3004_F873_X1_760 • 9/20/2023 12 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitors - F873, Class X1, 760 VAC Packaging Quantities Height (mm) Length (mm) Bulk Short Leads Bulk Long Leads Standard Reel ø 355 mm Large Reel ø 500 mm Ammo Pizza 22.5 6 7 8.0 8.5 9 10 11 13 15.5 14.5 16 16.0 17 18.5 18.5 20 22 24.5 26 26 26 26 26 26 26 26 26 805 700 520 450 400 360 300 230 150 450 450 300 350 225 350 200 150 100 300 250 240 250 200 160 190 150 120 700 550 500 450 400 350 350 300 250 464 380 330 280 300 235 217 200 170 660 564 492 468 444 396 360 300 252 27.5 9.0 11.0 13.0 14.0 17.0 17.5 19.0 22.0 21.0 27.5 31.0 17.0 20.0 25.0 28.0 40.0 28.0 29.0 37.0 12.5 16.0 19.0 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 370 300 250 230 190 190 170 150 150 120 100 37.5 11.0 13.0 15.0 16.0 19.0 21.0 24.0 30.0 24.0 24.0 22.0 24.0 26.0 28.5 32.0 38.0 44.0 45.0 15.0 19.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 210 175 154 140 119 105 91 77 91 91 Lead Thickness Size Code Spacing (mm) DB DI DH DJ DM DO DP DU DY FB FC FI FN FO FR FS FY FH FQ FT RB RF RH RC RD RP RO RU RV RW © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3004_F873_X1_760 • 9/20/2023 13 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitors - F873, Class X1, 760 VAC Lead Taping & Packaging (IEC 60286–2) Lead Spacing 5 mm ∆p Lead Spacing 7.5 mm ∆p ∆h H1 W2 F H0 P1 ∆p W0 W1 W W D0 P1 ∆p ∆h t P0 ∆p ∆h H1 W0 W1 P1 ∆p ∆h W2 F H0 D0 P0 Lead Spacing 22.5 – 27.5 mm Lead Spacing 10 – 15 mm H1 ∆h W2 F H0 t ∆p ∆h H1 W0 W1 P0 ∆p ∆h W2 F H0 W0 W1 W D0 P0 P1 ∆h W D0 t t Taping Specification Dimensions in mm Lead Spacing Standard IEC 60286–2 +0.6/−0.1 F 5.0 7.5 10.0 15.0 22.5 27.5 +1/−0.5 W 18.0 18.0 18.0 18.0 18.0 18.0 Minimum W0 6.0 6.0 9.0 10.0 10.0 10.0 Position of Sprocket Hole ±0.5 W1 9.0 9.0 9.0 9.0 9.0 9.0 9+0.75/−0.5 Distance Between Tapes Maximum W2 3.0 3.0 3.0 3.0 3.0 3.0 3.0 Sprocket Hole Diameter ±0.2 D0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 Carrier Tape Width Hold-Down Tape Width 18 12.7 12.7 12.7 12.7 12.7 12.7 12.7 ±0.7 P1 3.85 3.75 7.7 5.2 7.8 5.3 P1 Maximum ∆p 1.3 1.3 1.3 1.3 1.3 1.3 1.3 Lateral Deviation ±2 ∆h 2.0 2.0 2.0 2.0 2.0 2.0 2.0 Total Thickness ±0.2 t 0.7 0.7 0.7 0.7 0.9MAX 0.9MAX 0.9MAX Sprocket Hole/Cap Body ±0.5 H0 18.5 18.5 18.5 18.5 18.5 18.5 18 +2/−0 Feed Hole Lead Spacing Distance Lead – Feed Hole Deviation Tape – Plane ±0.2 (1) P0 F +1/−0.5 (3) (2) ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 (1) Maximum cumulative feed hole error, 1 mm per 20 parts. (2) 16.5 mm available on request. (3) 15 mm available on request (F ≥ 10 mm). © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3004_F873_X1_760 • 9/20/2023 14 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitors - F873, Class X1, 760 VAC Lead Taping & Packaging (IEC 60286–2) cont. Ammo Specifications Series F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx Dimensions (mm) H W T 360 340 59 330 330 50 H T W Reel Specifications Series F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx Dimensions (mm) D H W 355 500 360 500 30 25 55 (Max) 30 46 (Max) D H W © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3004_F873_X1_760 • 9/20/2023 15 Film Capacitors – AC Line EMI Suppression and RC Networks Metallized Polypropylene Film EMI Suppression Capacitors - F873, Class X1, 760 VAC KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer YAGEO Corporation and its affi liates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space fl ight. All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. Additional information about production site flexibility can be found KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3004_F873_X1_760 • 9/20/2023 16