FLLE2032ASMD

FLLE2 – S Single phase EMI Filter Overview RoHS General purpose, single phase filter series with high/very high attenuation. Chassis mount for fast mounting, metal case filled with selfextinguishing resin. Fast-on or screw terminals available and options with flexible wire connections. Medical versions available without y-capacitors for no leakage current. Technical specifications Typical electrial schematics Item Parameters/ Characteristics Rated Voltage 300 VAC/VDC Rated Frequency 50 - 60 Hz Rated Current 1 - 32 A Rated Temperature 40°C Temperature range -25°C to 100°C Climate Category 25/100/21 Voltage Test Compliant P -> N 1300 VDC P/N -> E 2250 VDC Components Rated Current @ 40°C Leakage Current *) CX1 R L1 CY1 CX2 L2 (A) (mA) (µF) (MΩ) (mH) (nF) (µF) (mH) FLLE2001AS(1)(2) 1 0.37 0.33 0.68 22 4.7 0.33 22 FLLE2003AS(1)(2) 3 0.37 0.47 0.47 14 4.7 0.47 14 FLLE2006AS(1)(2) 6 0.37 1 0.22 8 4.7 1 8 FLLE2010AS(1)(2) 10 0.37 1 0.22 5 4.7 1 5 FLLE2013AS(1)(2) 13 0.37 1 0.22 4 4.7 1 4 FLLE2016AS(1)(2) 16 0.37 1 0.22 4 4.7 1 4 FLLE2020AS(1)(2) 20 0.37 2.2 0.15 2 4.7 2.2 2 FLLE2025AS(1)(2) 25 0.37 2.2 0.15 2 4.7 2.2 2 FLLE2032AS(1)(2) 32 0.37 2.2 0.15 1.3 4.7 2.2 1.3 Part Number (1) D = Standard, M = Medical (2) B = Fast-on (1-16A), I = Threaded (20-32A), D = Wire (1-32A) *) Leakage current @250 VAC / 50 Hz acc. to IEC60939-3. Medical version without CY-capacitors, no leakage current. May 2020 KEMET EMC Filters 1 FLLE2 – S Single phase EMI Filter Approvals (pendning) Standard IEC/EN 60939-3 ANSI/UL 60939-3-2016 Certification Body UL-Demko UL File Pending Pending Typical insertion loss May 2020 KEMET EMC Filters 2 FLLE2 – S May 2020 Single phase EMI Filter KEMET EMC Filters 3 FLLE2 – S Single phase EMI Filter Mechanical dimensions L W H Weight Fast-on Threaded Flexible (mm) (mm) (mm) (g) Terminal Terminal Wire (mm²) FLLE2001AS(1)(2) 51 45 28 130 6.3 x 0.8 0.75 FLLE2003AS(1)(2) 65 50 40 280 6.3 x 0.8 0.75 FLLE2006AS(1)(2) 91 51 45 410 6.3 x 0.8 1.5 FLLE2010AS(1)(2) 91 51 45 410 6.3 x 0.8 1.5 FLLE2013AS(1)(2) 130.5 56.5 48.5 690 6.3 x 0.8 1.5 FLLE2016AS(1)(2) 130.5 56.5 48.5 690 6.3 x 0.8 2.5 FLLE2020AS(1)(2) 130.5 56.5 48.5 720 M4 x 0.7 2.5 FLLE2025AS(1)(2) 130.5 56.5 48.5 720 M4 x 0.7 2.5 FLLE2032AS(1)(2) 130.5 56.5 48.5 800 M4 x 0.7 4 Part Number (1) D = Standard, M = Medical (2) B = Fast-on, I = Threaded, D = Wire (Lenght = 140±5 mm) May 2020 KEMET EMC Filters 4 FLLE2 – S Single phase EMI Filter 1A 3A 6A and 10A 13A and 16A 20A, 25A and 32A May 2020 KEMET EMC Filters 5 FLLE2 – S Single phase EMI Filter Legal disclaimer notice All product specifications, statements, information and data (collectively, the “information”) are subject to change without notice. products is given gratis, and we assume no obligation or liability for the advice given or results obtained. All information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that failure of an electrical component does not result in a risk of personal injury or property damage. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their applications. Any technical advice inferred from this information or otherwise provided by us with reference to the use of our May 2020 Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not required KEMET EMC Filters 6