GF-220U

EMI-RFI Filters GF Metal Box Single-Phase Filters Overview Applications The KEMET GF compact metal box filters cover singlephase requirements with a wide variety of characteristics. These filters are optimized for conduction noise. Their input/output terminals are screw type or Faston® type. • Industrial equipment • Electronic equipment Benefits • Single-phase 250 VAC • Current range from 5 to 20 A • Operating temperature range from -20°C to +60°C (except GF-205E at -20°C to +55°C) • UL or CSA approved versions available • RoHS compliant Part Number System GF- 2 20 U Series Phase Rated Current (A) Specification GF 2 = Single-phase 0x = 0x A xx = xx A E = Faston® terminal, CSA approved U = Screw terminal, UL approved Note: Faston® is a registered trademark of Tyco Electronics AMP Built Into Tomorrow © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com ERF0003_GF • 12/2/2020 1 EMI-RFI Filters – GF Metal Box Single-Phase Filters Dimensions – Millimeters GF-2**U Recommended torque (N-m) maximum • Line terminal (M4: 0.78) • Earth terminal (M4: 1.18) GF-2**E Recommended torque (N-m) maximum • Line terminal (M4: 0.78) • Earth terminal (M4: 1.18) Faston® is a registered trademark of Tyco Electronics AMP. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com ERF0003_GF • 12/2/2020 2 EMI-RFI Filters – GF Metal Box Single-Phase Filters Environmental Compliance KEMET GF EMI-RFI Filters comply with EU RoHS Directive 2011/65/EU and (EU) 2015/863. Products that fall under the exemptions listed in below table are also included. Part Number RoHS Compliant RoHS Exemption Code GF-205U Yes 6(c) and 7(c)-I GF-210U Yes 6(c) and 7(c)-I GF-220U Yes 6(c) and 7(c)-I GF-205E Yes 7(c)-I Code Exemption 6(c) Copper alloy containing up to 4% lead by weight 7(c)-I Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound Approvals Certification Body File Number Part Number UL E59551 GF-205U, GF-210U and GF-220U CSA LR50413 GF-205E Performance Characteristics Item Rated Voltage Rated Current Range Withstanding Voltage Insulation Resistance Leakage Current Input/Output Terminal Type Operating Temperature Range Performance Characteristics 250 V 5 – 20 A 1,500 VAC (1 minute, line to ground) 300 MΩ minimum at 500 VDC (1 minute, line to ground) 1 mA maximum at 250 V/60 Hz Screw and Faston® −20°C to +60°C, except GF-205E at −20°C to +55°C (not including self temperature rise) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com ERF0003_GF • 12/2/2020 3 EMI-RFI Filters – GF Metal Box Single-Phase Filters Table 1 – Ratings & Part Number Reference Rated Current AC/DC (A) Leakage Operating Current at 250 Temperature Rise (K) Temperature V/60 Hz (mA) Maximum Range Maximum Part Number Phase Rated Voltage AC/DC (V) GF-205U Single-phase 250 5 1 30 -20°C to +60°C Screw UL 130 GF-210U Single-phase 250 10 1 30 -20°C to +60°C Screw UL 140 GF-220U Single-phase 250 20 1 30 -20°C to +60°C Screw UL 150 GF-205E Single-phase 250 5 1 30 -20°C to +55°C Faston® CSA 130 Terminal Type Approval Weight (g) Circuit Diagram Measuring Circuit - Common Mode Measuring Circuit - Normal Mode © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com ERF0003_GF • 12/2/2020 4 EMI-RFI Filters – GF Metal Box Single-Phase Filters Attenuation (Static Characteristics) GF-205U GF-210U GF-220U GF-205E © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com ERF0003_GF • 12/2/2020 5 EMI-RFI Filters – GF Metal Box Single-Phase Filters Packaging Part Type Packaging Type Pieces per Box GF-2**U GF-2**E Tray 10 50 Handling Precautions Precautions for product storage EMI-RFI Filters should be stored in normal working environments. While the filters themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. KEMET recommends that maximum storage temperature not exceed 40°C, maximum storage humidity not exceed 70% relative humidity, and atmospheres should be free of chlorine and sulfur bearing compounds. Temperature fluctuations should be minimized to avoid condensation on the parts. Also, avoid storage near strong magnetic fields as this might magnetize the product. EMI-RFI Filters’ stock should be used promptly, preferably within 12 months of receipt. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com ERF0003_GF • 12/2/2020 6 EMI-RFI Filters – GF Metal Box Single-Phase Filters KEMET Electronics Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. When providing KEMET products and technologies contained herein to other countries, the customer must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the International Traffic in Arms Regulations (ITAR), the US Export Administration Regulations (EAR) and the Japan Foreign Exchange and Foreign Trade Act. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com ERF0003_GF • 12/2/2020 7