MKT

Loose Taped MeTAllIZeD POlyeSTeR FIlM CAPACITOR D.C. MulTIPuRPOSe APPlICATIONS MKT Series R82 Typical applications: by-passing, blocking, coupling, decoupling, timing, oscillator circuits. For inverter applications please refer to RSB Series. All dimensions are in mm. B Ød ±0.05 ≤6 0.5 >6 0.6 PRoDUCT CoDe: R82 Pitch Box thickness (B) (mm) (mm) 5.0 5.0 0.1µF +40°C±2°C 93% ±2% 56 days ≤ 5% ≤ 50x10-4 at 1kHz ≥ 50% of initial limit. ≤ 80 ≤ 120 ≤ 250 ≤ 80 ≤ 120 endurance: Test conditions +105°C ±2°C Temperature: Test duration: 2000 h Voltage applied: 1.25xVC Performance Capacitance change |∆C/C|: ≤ 5% DF change (∆tgδ): ≤ 30x10-4 at 10kHz for C≤1µF for C>1µF ≤ 20x10-4 at 1kHz Insulation resistance: ≥50% of initial limit. Resistance to soldering heat: Test conditions +260°C±5°C Solder bath temperature: Dipping time (with heat screen):10 s ±1 s Performance Capacitance change |∆C/C|: ≤2% DF change (∆tgδ): ≤ 30x10-4 at 10kHz for C≤ 1µF ≤ 20x10-4 at 1kHz for C> 1µF Insulation resistance: ≥ initial limit. long term stability (after two years): Storage: standard environmental conditions (see page 12). Performance Capacitance change |∆C/C|: ≤ 3% for C≤ 0.1µF ≤ 2% for C> 0.1µF RelIABIlITy: Reference MIL HDB 217 Application conditions: +40°C±2°C Temperature: Voltage: 0.5xVR Failure rate: ≤ 1 FIT (1 FIT = 1x10-9 failures/components x h) Failure criteria: (according to DIN 44122) Short or open circuit Capacitance change |∆C/C|: > 10% DF change (∆tgδ): > 2 x initial limit. Insulation resistance: < 0.005 x initial limit. Insulation resistance: Test conditions Temperature: Voltage charge time: Voltage charge: +25°C±5°C 1 min 50 Vdc for VR 0.33µF and ≤1µF ≥ 1000 s for C > 1µF For VR >100 Vdc ≥ 30000 MΩ *Typical value Test voltage between terminations: 1.4xVR applied for 2 s at +25°C±5°C. 09/2008 28 MeTAllIZeD POlyeSTeR FIlM CAPACITOR D.C. MulTIPuRPOSe APPlICATIONS p = 5 mm PRoDUCT CoDe: R82 MKT Series R82 MAX. VoLTAGe (Vr.m.s.) VeRSUS FReQUeNCY (sinusoidal wave-form / Th ≤ 40°C) 29 09/2008 MeTAllIZeD POlyeSTeR FIlM CAPACITOR D.C. MulTIPuRPOSe APPlICATIONS p = 5 mm PRoDUCT CoDe: R82 MKT Series R82 MAX. CURReNT (Ir.m.s.) VeRSUS FReQUeNCY (sinusoidal wave-form / Th ≤ 40°C) 1 Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.