MPC1260LR45

SMD Inductors NOT FOR NEW DESIGN Large-Current Power Inductors MPC Overview The KEMET MPC metal composite inductors are designed for use in power supplies with high ripple current. These inductors offer a superior saturation current when compared to technologies based on ferrite cores. Their low height makes them ideal in applications with thin profile requirements. Also, the flat wire used in the design of the MPC enables high ripple current carrying capabilities. Applications • • • • • • Switching DC-DC power supplies Notebook computers Tablets Embedded computer systems HDTVs DVD and BluRay players Part Number System MPC 0740 L R42C Series Size Code Inductor Inductance Code µH MPC 0730 0740 0750 1040 1055 1250 R = decimal point Examples: R42C = 0.42 µH 1R0C = 1.0 µH One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9001_MPC • 9/11/2018 1 NOT FOR NEW DESIGN SMD Inductors Large-Current Power Inductors MPC Table 1 – Ratings & Part Number Reference 1 2 Rated Current (A) Part Number Inductance (µH) at 100 kHz Inductance Tolerance DC Resistance (mΩ) ±10% Irms1 (Ref.) Isat2 (Ref.) MPC0730LR20C 0.20 ±25% 1.20 23.0 17.5 20.0 MPC0740LR42C 0.42 ±20% 1.55 22.0 MPC0750LR60C 0.60 ±20% 2.30 17.0 19.0 MPC0750LR68C 0.68 ±20% 2.20 18.0 16.0 30.0 MPC1040LR36C 0.36 ±20% 1.05 25.5 MPC1040LR45C 0.45 ±20% 1.10 25.0 27.0 MPC1040LR56C 0.56 ±20% 1.30 23.0 25.0 MPC1040LR88C 0.88 ±20% 2.30 17.0 24.0 MPC1055LR36C 0.36 ±20% 0.75 32.0 35.0 MPC1055L1R0C 1.00 ±20% 2.30 18.5 21.0 MPC1250LR36C 0.36 ±20% 0.65 38.0 40.0 MPC1250LR50C 0.50 ±20% 0.80 35.0 40.0 T = 40 K rise at rated current. Inductance drop 20% at rated current. DC-Superposed Characteristics 70 0.25 0.20 50 40 0.15 30 0.10 20 0.05 0.00 5 10 15 20 25 70 60 0.4 50 40 0.3 30 0.2 20 0 0 10 0 5 10 15 25 30 MPC0750LR68C 0 80 0.8 0.7 70 0.7 70 0.6 60 0.6 60 0.5 50 0.5 50 0.4 40 0.4 40 0.3 30 0.3 30 0.2 20 0.2 20 0.1 10 0.1 10 0 0.0 0 0 5 10 15 20 25 30 Idc (A) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Inductance (µH) 80 T (ºC) Inductance (µH) MPC0750LR60C 20 Idc (A) DC Current (A) 0.8 80 0.1 10 0 MPC0740LR42C 0.5 60 T (ºC) Inductance (µH) 0.6 T (ºC) 80 0 5 10 15 20 25 T (ºC) MPC0730LR20C Inductance (µH) 0.30 0 DC Current (A) L9001_MPC • 9/11/2018 2 NOT FOR NEW DESIGN SMD Inductors Large-Current Power Inductors MPC DC-Superposed Characteristics cont’d 0.7 60 50 0.3 40 0.2 30 20 0.1 Inductance (µH) 0.4 10 15 20 Idc (A) 25 30 MPC1040LR56C 50 40 0.3 30 0.2 20 0.1 0 Inductance (µH) Inductance (µH) 60 0.4 5 10 15 20 25 30 20 10 0 5 10 15 70 0.8 60 0.7 0.6 50 0.5 40 0.4 30 0.3 0 0 1.4 70 1.2 50 0.3 40 0.2 30 20 0.1 Inductance (µH) 80 60 20 10 0 5 10 15 20 Idc (A) 25 30 35 40 MPC1250LR36C 0.4 0.2 0.6 30 20 0.1 10 5 10 15 20 Idc (A) 0 25 30 35 40 80 70 60 50 40 30 0.4 70 40 MPC1055L1R0C 0.6 0.7 50 0 30 0.8 80 60 0.3 0 25 1.0 0 0 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Inductance (µH) 15 0 ∆T (ºC) Inductance (µH) 0.5 10 20 20 0.2 10 5 0 80 0.1 ∆T (ºC) Inductance (µH) MPC1055LR36C 0 30 Idc (A) 0.4 0 25 MPC1040LR88C Idc (A) 0.5 20 Idc (A) 0.2 10 0 30 0.2 0.9 70 0.5 40 0.3 1.0 80 0.6 50 0.4 10 0 5 10 15 20 Idc (A) 0 30 25 MPC1250LR50C 80 70 60 0.5 50 0.4 40 0.3 30 0.2 20 0.1 0 ∆T (ºC) 5 60 0.5 0 0 T (ºC) 0.7 0 70 0.1 10 0 80 0.6 T (ºC) Inductance (µH) 70 MPC1040LR45C T (ºC) 80 T (ºC) MPC1040LR36C ∆T (ºC) 0.5 10 0 5 10 15 20 Idc (A) 25 30 35 40 0 L9001_MPC • 9/11/2018 3 MPC1040LR36C 0.36 ±20% MPC0750LR60C 0.60 ±20% [RoHS MPC0750LR60C 0.60±20% ±20% [RoHS Compliant] Compliant] MPC1040LR36C 0.36 ±20% MPC1040LR36C 0.36 MPC0750LR60C 0.60 MPC1040LR36C 0.36 ±20% MPC1040LR45C 0.45 ±20% MPC1040LR36C 0.36 ±20% MPC1040LR36C 0.36 ±20% MPC1040LR45C 0.45 ±20% ･ Precautions (see page 80) MPC1040LR45C 0.45 MPC1040LR36C 0.36±20% MPC1040LR45C 0.45 ±20% 0.56 ±20% ･ MPC1040LR56C Precautions (see page 80) MPC1040LR45C 0.45 ±20% MPC1040LR45C 0.45±20% ±20% MPC1040LR56C 0.56 ±20% MPC1040LR56C 0.56 Inductance MPC1040LR45C 0.45 MPC1040LR56C 0.56 ±20% MPC1040LR88C 0.88 ±20% MPC1040LR56C 0.56 ±20% Inductance （μH） MPC1040LR56C 0.56 ±20% Model ･ Precautions (see page 80) MPC1040LR88C 0.88 ±20% MPC1040LR88C 0.88 ±20% MPC1040LR56C 0.56 MPC1040LR88C 0.88 ±20% （μH） Model MPC1055LR36C 0.36 ±20% at 100kHz MPC1040LR88C 0.88 ±20% MPC1040LR88C 0.88 ±20% MPC1055LR36C 0.36 ±20% Inductance MPC1055LR36C 0.36 at 100kHz MPC1040LR88C 0.88±20% MPC1055LR36C 0.36 ±20% SMD Inductors MPC0740LR42C 0.42 ±20% MPC1055L1R0C 1.00 ±20% MPC1055LR36C 0.36 ±20% （μH） Model MPC1055LR36C 0.36 ±20% MPC0740LR42C 0.42 ±20% MPC1055L1R0C 1.00 ±20% MPC1055L1R0C 1.00 MPC1055LR36C 0.36±20% MPC1055L1R0C 1.00 ±20% MPC0750LR60C 0.60 ±20% MPC1250LR36C 0.36 ±20% at 100kHz Large-Current Power Inductors MPC MPC1055L1R0C 1.00 ±20% MPC1055L1R0C 1.00 ±20% MPC0750LR60C 0.60 ±20% MPC1250LR36C 0.36 ±20% MPC1040LR36C 0.36 ±20% MPC1250LR36C 0.36 MPC1055L1R0C 1.00±20% MPC1250LR36C 0.36 ±20% MPC0740LR42C 0.42 ±20% MPC1250LR50C 0.50 ±20% MPC1250LR36C 0.36 ±20% MPC1040LR36C 0.36 ±20% MPC1250LR36C 0.36±20% ±20% MPC1040LR45C 0.45 ±20% MPC1250LR50C 0.50 ±20% MPC1250LR50C 0.50 MPC1250LR36C 0.36 MPC1250LR50C 0.50 ±20% MPC0750LR60C 0.60 ±20% 0.45 ±20% MPC1250LR50C MPC1040LR56C 0.56 ±20% current. ＊1　T=40K rise at ratedMPC1040LR45C current.　＊2　Inductance drop 20% at0.50 rated±20% MPC1250LR50C 0.50 ±20% MPC1040LR36C 0.36 ±20% MPC1250LR50C 0.50 ±20% MPC1040LR56C 0.56 ±20% ＊1　T=40K rise at ratedrange: current.　＊2　Inductance drop 20% at rated ＊1　T=40K rise current.　＊2　Inductance 20% rated current. ●Operating temperature －20～+120drop (Include self temperat rise) MPC1040LR88C 0.88 ±20% urecurrent. ＊1　T=40K riseatatrated rated current.　＊2　Inductance drop 20%atat rated current. 1.05 ±10% 2.30 ±10% 2.30±10% ±10% 1.05 ±10% 1.05 2.30 1.05 ±10% 1.10 ±10% 1.05 ±10% 1.05 ±10% 1.10 ±10% 1.10 1.05±10% 1.10 ±10% 1.30 ±10% 1.10 ±10% 1.10±10% ±10% 1.30 ±10% 1.30 1.10 1.30 ±10% 2.30 ±10% DC resistance 1.30 ±10% 1.30 ±10% 2.30 DC resistance 2.30 ±10% 1.30 2.30 ±10% （mΩ） typ.±10% 0.75 ±10% 2.30 ±10% （mΩ） typ. ±10% 2.30 ±10% 0.75 0.75 ±10% 2.30 0.75 ±10% 1.55 ±10%±10% 2.30 DC resistance 0.75 ±10% 0.75 ±10% 1.55 ±10% 2.30 ±10% 2.30 ±10% 0.75 2.30 ±10% （mΩ） typ. ±10% 2.30 ±10% 0.65 2.30 ±10% 2.30 ±10% 2.30 ±10% 0.65 1.05 ±10%±10% 0.65 ±10% 2.30 0.65 ±10% 1.55 ±10% 0.80 ±10% 0.65 ±10% 1.05 ±10% 0.65 ±10% 1.10 ±10%±10% 0.80 0.80 ±10% 0.65 0.80 ±10% 2.30 ±10% 1.10 ±10% 0.80 ±10% 1.30 ±10% 0.80 ±10% 1.05 ±10% 0.80 ±10% 1.30 2.30±10% ±10% 25.5 17.0 17.0 25.5 25.5 17.0 25.5 25.0 25.5 25.5 25.0 25.5 25.0 25.0 23.0 25.0 25.0 23.0 23.0 25.0 23.0 Rated current 17.0 23.0 Rated current 23.0 ＊1 Irms 17.0 17.0 23.0 17.0 ＊1 32.0 Irms (Ref.) 17.0 17.0 32.0 32.0 17.0 32.0 (Ref.) Rated current 22.0 18.5 32.0 32.0 ＊1 Irms 22.0 18.5 32.0 18.5 18.5 17.0 38.0 (Ref.) 18.5 18.5 17.0 25.5 38.0 18.5 38.0 38.0 22.0 35.0 38.0 25.5 38.0 25.0 35.0 35.0 38.0 35.0 17.0 25.0 35.0 23.0 35.0 25.5 35.0 23.0 17.0 19.0 19.0 30.0 19.0 30.0 30.0 30.0 27.0 30.0 27.0 27.0 27.0 25.0 27.0 25.0 （A） 25.0 （A） 25.0 Isat ＊224.0 25.0 24.0 Isat ＊224.0 (Ref.) 24.0 24.0 35.0 (Ref.) 35.0 （A） 20.0 35.0 35.0 Isat 20.0 ＊2 21.0 35.0 21.0 19.0 (Ref.) 21.0 21.0 19.0 40.0 30.0 21.0 40.0 20.0 30.0 40.0 40.0 27.0 40.0 40.0 19.0 27.0 40.0 25.0 40.0 30.0 40.0 NOT FOR NEW DESIGN 3 .3 4.14.1 3 .3 5.9 3 .3 3 .3 4.1 4.14.1 4.1 4.1 5.9 3 .3 5.9 3.3 3.3 5.9 3.3 3.3 3.3 3.3 3.3 5.9 3.3 3.3 3.3 5.9 5.95.9 5.9 3.3 5.9 3.3 5.9 3.3 5.9 3.3 3.3 3.3 3.6 3.63.6 3.6 3.6 3.6 5.9 3.3 5.9 3.3 3.3 3.3 4.1 4.14.1 4.1 4.1 4.14.1 3.3 3.3 3.3 3.63.6 3.3 3.6 4.1 3.3 5.9 3.3 3.3 3.3 5.9 5.9 5.9 3.3 5.9 3.3 5.9 3.3 5.9 5.9 3.3 3.3 4.1 3.3 3.3 3.3 3.3 3.3 3.3 3.6 3.5 ±0.5 3.5 ±0.5 3.5 3.5 ±0.5 3.5 ±0.5 3.5±0.5 ±0.5 3.5 ±0.5 3.5 ±0.5 5.5 Maximum 2.62.6 3 .3 5.9 35.9 3..33 33.3.3 3 .3 4.1 3 .3 3 .3 5.9 5.9 5.9 5.9 5.9 5.9 3 .3 4.1 3.0 ±0.5 (2.1) (2.1) (2.1)(2.1) (2.1) 5.5 Maximum (2.1) (2.1) Maximum (2.1) 5.5 5.55.5 Maximum 5.5Maximum Maximum (2.1) 5.5 5.5Maximum Maximum 5.5 Maximum 2.62.6 2.6 2.62.6 2.6 2.6 2.6 2.6 2.6 2.6 2.62.6 2.6 2.6 2.6 33..33 33.3.3 33.3.3 4.1 (2.1) (2.1) 5.5 Maximum 3.3 (2.1) (2.1) (2.1) (2.1) 3.0 ±0.5 3.4 3.3 3.4 3.4 8.6 8.6 3.4 8.6 3.4 3.4 3.6 [Part No] [Part No] [Part No]No] [Lot No] [Lot 5.9 [Part No] [Lot No] [Lot No] 3.4 8.6 3.4 3.6 [Lot No] 5.0 Maximum 5.0Maximum Maximum 5.0 5.0 Maximum 3.3 [mm] [mm] 3.3 3.6 10.0 ±0.3 5.9 5.9 [Lot No] [Part No] 14.5 Maximum 14.5 14.5 Maximum 14.5 Maximum Maximum 12.5 ±0.3 5.9 3.0 ±0.5 10.0 ±0.3 [Part[Part No]No] [Part[Lot No]No] [Lot No] 10.0 ±0.3 10.0 ±0.3 3.3 3.3 3.3 [mm] [mm] [mm] [mm] [mm] 3.6 5.5 Maximum 3.3 3.6 3.6 5.5 Maximum 5.5 Maximum 3.6 3.6 11.7 Maximum [mm] 3.0 ±0.5 11.7 Maximum 11.7 Maximum [mm] [mm] 3.0 ±0.5 11.7 Maximum 12.5 ±0.3 12.5 ±0.3 MPC1250LR36C MPC1250LR50C 12.5 ±0.3 ● MPC1250LR36C ● MPC1250LR36C ● MPC1250LR36C ● MPC1250LR36C ● MPC1250LR50C ● MPC1250LR50C ● MPC1250LR50C ● MPC1250LR50C 2.7 3.0 ±0.5 3.0 ±0.5 3.0 ±0.5 3.0 ±0.5 3.0 ±0.5 3.0 ±0.5 3.0 ±0.5 (2.1) [Part [PartNo] No] No] [Part [PartNo] No] [Part [LotNo] No] [Lot [Part No] [Part No] [PartNo] [Lot No] No] [Lot No] [Part No] [Lot [Lot [LotNo] No] [Lot No] [Lot No] 4 MPC1055L1R0C 3.5 (2.1) (2.1) (2.1)(2.1) (2.1) (2.1) (2.1) (2.1) Power Inductors VOL.11 4 4 44 2.7 5.5 Maximum Power Inductors VOL.11 ● MPC1055L1R0C Power Inductors VOL.11 4 ● MPC1055L1R0C Power Inductors Power Inductors VOL.11VOL.11 Power VOL.11 ● MPC1055L1R0C Power Inductors Inductors VOL.11 Power Inductors VOL.11 Power Inductors VOL.11 4 4 VOL.11 ● MPC1055L1R0C 4 4Power Inductors 2.7 3.0 ±0.5 3.0 ±0.5 MPC1055LR36C 11.7 Maximum [Lot No] 2.7 3.5 3.3 4.0 Maximum 11.7 Maximum [Lot No] 11.7 Maximum 11.7 Maximum 11.7 11.7 Maximum 11.7Maximum Maximum 11.7 11.7Maximum Maximum [Part No] 11.7 Maximum 10.0 ±0.3 10.0 ±0.3 10.0 ±0.3 10.0 ±0.3 10.0 ±0.3 10.0 ±0.3 10.0 ±0.3 ● MPC1055LR36C ● MPC1055LR36C ● MPC1055LR36C ●● MPC1055LR36C MPC1055LR36C ●● MPC1055LR36C MPC1055LR36C ● MPC1055LR36C ● MPC1055LR36C (1.5) 4.0 Maximum 2.7 2.7 4.1 10.0 ±0.3 10.0 ±0.3 ● MPC1055LR36C [Lot [LotNo] No] [Part No] [Lot No] [Lot [LotNo] No] [Lot No] [Lot No] [Part No] 3.5 2.7 3.0 ±0.5 3.0 ±0.5 MPC1040LR88C 2.7 (2.1) [Part No] [PartMaximum No] 11.5 [Lot No]No] [Part [PartNo] No] [Part [Lot No] [Part No] [Part No] [Part No] 10.0 ±0.3 10.0 ±0.3 10.0 ±0.3 10.0 ±0.3 10.0 ±0.3 10.0 ±0.3 ● MPC1040LR88C 10.0 ±0.3 10.0 ±0.3 ● MPC1040LR88C ● MPC1040LR88C ● MPC1040LR88C ●● MPC1040LR88C MPC1040LR88C ●● MPC1040LR88C MPC1040LR88C ● MPC1040LR88C ● MPC1040LR88C 4.0 Maximum (0.1) 2.7 3.5 2.72.7 3.5 2.7 2.7 3.5 3.52.7 2.7 2.73.5 2.7 2.7 3.5 3.5 2.7 2.7 2.7 3.5 2.7 [Lot No] (2.1) [Part No] (2.1) (2.1) (2.1) (2.1) 4.0 Maximum (2.1) 11.5 Maximum 4.0 Maximum [Lot No] 11.5 Maximum (2.1) 4.0 Maximum (2.1) 11.5 Maximum 4.0 11.5 4.0Maximum Maximum 11.5Maximum Maximum (2.1) 4.0 11.5 4.0Maximum Maximum 11.5Maximum Maximum 4.0 Maximum 11.5 Maximum 4.0 Maximum 11.5 Maximum 10.0 ±0.3 10.0 ±0.3 10.0 ±0.3 ● MPC1040LR36C MPC1040LR56C MPC1040LR56C ● MPC1040LR45C ● MPC1040LR56C 11.5 No] Maximum [Part No] [Part [PartNo] No] [Part [Lot[Part No] No] [Part No] [PartNo] No] 11.5 Maximum [Lot [Lot No] [Part No] [Lot No] [Lot No] [Lot [LotNo] No] [Lot No] [Part No] 10.0 ±0.3 10.0 ±0.3 10.0 ±0.3 10.0 ±0.3 10.0 ±0.3 10.0 ±0.3 10.0 ±0.3 ● MPC1040LR36C ● ●● MPC1040LR36C MPC1040LR36C ● MPC1040LR36C MPC1040LR45C ● MPC1040LR36C MPC1040LR36C ● MPC1040LR36C ● ●●●MPC1040LR45C MPC1040LR45C MPC1040LR36C ● MPC1040LR45C MPC1040LR56C ● MPC1040LR45C ● MPC1040LR45C MPC1040LR45C MPC1040LR36C ● MPC1040LR56C ● ●●MPC1040LR56C MPC1040LR56C MPC1040LR45C ● MPC1040LR36C ● MPC1040LR56C ●● MPC1040LR56C MPC1040LR56C MPC1040LR45C ● MPC1040LR56C ● MPC1040LR45C 10.0 ±0.3 10.0 ±0.3 10.0 ±0.3 ● MPC0750LR60C 2.7 2.7 2.6 6.7 ±0.36.7 ±0.3 6.7 ±0.3 ● MPC0750LR60C 3.5 2.6 6.7 ±0.3 6.7 ±0.3 6.7 ±0.3 6.7 ±0.3 6.7 ±0.3 MPC0750LR60C● MPC0750LR60C MPC0750LR68C 6.7 ±0.36.7 ±0.3 6.7 ±0.3 6.76.7 ±0.3 ±0.3 ● MPC0750LR60C ● MPC0740LR42C ● MPC0750LR60C ●● MPC0750LR60C MPC0750LR60C ●● MPC0750LR60C MPC0750LR60C ● MPC0750LR60C 3.5 2.7 2.0 ±0.3 2.0 ±0.3 2.0 ±0.3 2.0 ±0.3 2.0 ±0.3 2.0 ±0.32.0 ±0.3 (1.5) 3.0 Maximum (MPC0730) (1.5) (1.5) [Part No] (1.5) 8.08.0 Maximum 4.0 Maximum (MPC0740) 5.0 Maximum Maximum (1.5) [Lot No] (1.5) 8.0 Maximum 8.0 5.0 Maximum (1.5) 8.0Maximum Maximum [Part No] 5.0 5.0Maximum Maximum 8.0 5.0 8.0Maximum Maximum 5.0Maximum Maximum 8.0 Maximum [Lot No] 5.0 Maximum (1.5) [Part No] [Part No] [Part 8.0No] Maximum [Lot No] 5.0 Maximum [PartNo] No] [Part [Lot No] (1.5) [Part No] [Part No] No] [Lot No] [Lot No] [Part No] [Lot 8.0 Maximum 5.0 Maximum [Lot [LotNo] No] (1.5) [Part No] [Lot No] (0.1) (1.5) 8.0 Maximum 5.0 Maximum [Lot No] (0.1) (1.5) (0.1) [Part No] (0.1) (1.5) (1.5) (0.1) (1.5) (0.1) Maximum 11.5 Maximum [Lot No] (1.5) (0.1) 4.0 (1.5) (1.5) (0.1) 4.0 Maximum 4.0 11.5 Maximum 11.5 [Part No] 4.0Maximum Maximum 11.5Maximum Maximum 4.0 11.5 4.0Maximum Maximum 11.5Maximum Maximum [Lot No] 4.0 Maximum 11.5 Maximum11.5 Maximum4.0 Maximum (0.1) (1.5) 2.7 2.7 2.7 2.7 3.53.5 ±0.5 ±0.5 8.0 Maximum 3.5 3.5 3.5 3.03.0 ±0.5 ±0.5 4.0 Maximum (MPC0740) 3.0 Maximum (MPC0730) [Lot Shape and●Dimensions Land Pattern [LotNo] No] MPC0740LR42C　　Recommended 4.0 Maximum (MPC0740) [Lot No] ● MPC0740LR42C 2.7 2.7 2.7 3.53.5 ±0.5 ±0.5 6.76.7 ±0.3 ±0.3 6.7 ±0.3 6.7 ±0.3 6.7 ±0.3 6.7 ±0.3 6.7 ±0.3 [Part No] [Part No] [Lot No] [Lot No] Maximum [Part No] [Lot8.0No] 2.02.0 ±0.3 ±0.3 4.0 4.0Maximum Maximum(MPC0740) (MPC0740) 4.0 Maximum (MPC0740) 2.02.0 ±0.3 ±0.3 8.0 8.0Maximum Maximum Land Pattern 3.5 ±0.5 ● MPC0740LR42C ● MPC0740LR42C ●● MPC0740LR42C ＊1　T=40K rise at rated current.　＊2　Inductance8.0 drop 20% at rated current. MPC0740LR42C Maximum MPC0730LR20C ●● MPC0740LR42C ●OperatingShape temperature －20～+120 (Include self temperat ure rise) and range: Dimensions 　　Recommended MPC0740LR42C [Part No]Land Pattern ● MPC0740LR42C No] Pattern [Part [PartNo] No] [Part MPC0740LR42C Shape and Dimensions 　　Recommended Land [Lot No] 3.0 Maximum (MPC0730) 25.0 24.0 27.0 24.0 35.0 25.0 35.0 21.0 24.0 21.0 40.0 35.0 40.0 40.0 21.0 40.0 40.0 40.0 25.0 17.0 32.0 23.0 32.0 18.5 17.0 18.5 38.0 32.0 38.0 35.0 18.5 35.0 38.0 2.7 3.5 2.7 2.7 3.5 3.52.7 2.7 2.73.5 35.0 3.5 ±0.5 3.5 ±0.5 3.5 ±0.5 3.5 ±0.53.5 ±0.5 3.5 ±0.5 3.5 ±0.5 Dimensions (mm) 2.0 ±0.3 2.0 ±0.3 2.0 ±0.3 2.0 ±0.3 2.0 ±0.3 Part Number 1.10 ±10% 2.30 0.75±10% ±10% 1.30 ±10% 0.75 2.30±10% ±10% 2.30 ±10% 2.30 0.65±10% ±10% 0.75 ±10% 0.65 0.80±10% ±10% 2.30 ±10% 0.80 ±10% 0.65 ±10% 0.80 ±10% 2.7 2.7 2.0 ±0.3 0.45 ±20% current. ure rise) ure rise) ure rise) current. 0.88 ±20% 0.36 ±20% current. ure rise) 0.56 ±20% ure rise) 0.36 ±20% 1.00 ±20% ure rise) MPC1040LR88C 0.88 ±20% MPC1055L1R0C 1.00 ±20% MPC1250LR36C 0.36 ±20% Shape and Dimensions 　　Recommended Land Pattern MPC1055LR36C 0.36 ±20% MPC1250LR36C 0.36 ±20% MPC1250LR50C 0.50 ±20% Shape and Dimensions 　　Recommended Land Pattern Shape Dimensions 　　Recommended Land Shapeand and Dimensions 　　Recommended LandPattern Pattern MPC1055L1R0C 1.00 ±20% Shape and Dimensions 　　Recommended Land Pattern (MPC0730) MPC1250LR50C 0.50 ±20%3.0 Maximum Shapeand andDimensions Dimensions 　　Recommended Land Pattern ＊1　T=40K rise at rated current.　＊2　Inductance drop 20% atPattern rated current. Shape 　　Recommended Land MPC1250LR36C 0.36 ±20% 3.0 Maximum (MPC0730) 3.0 (MPC0730) 3.0Maximum Maximum (MPC0730) 4.0 Maximum ●Operating temperature range: －20～+120 (Include self temperat ure rise) (MPC0740) Maximum ＊1　T=40K rise at rated current.　＊2　Inductance drop 20% at8.0 rated current. 3.0 Maximum (MPC0730) 4.0 Maximum (MPC0740) 4.0 Maximum 3.0 Maximum (MPC0730) MPC1250LR50C 0.50 ±20% (MPC0740) 4.0 8.0 Maximum 8.0 Maximum 8.0self Maximum 3.0 Maximum Maximum (MPC0740) (MPC0730) ●Operating temperature range: －20～+120 (Include temperat ure rise) 2.0 ±0.32.0 ±0.3 2.0 ±0.3 Dimensions MPC1040LR45C ＊1　T=40K rise current.　＊2　Inductance 20% rated ●Operating temperature range: －20～+120 (Include self temperat ●Operating temperature range: －20～+120 (Include self temperat ●Operating temperature range: －20～+120 (Includedrop self temperat ＊1　T=40K riseatatrated rated current.　＊2　Inductance drop 20%atat rated MPC1040LR88C MPC1055LR36C ＊1　T=40Ktemperature rise at rated current.　＊2　Inductance drop temperat 20% at rated ●Operating (Include MPC1040LR56C ●Operating temperaturerange: range: －20～+120 －20～+120 (Includeself self temperat MPC1055LR36C MPC1055L1R0C ●Operating temperature range: －20～+120 (Include self temperat 30.0 30.0 27.0 27.0 25.0 25.0 24.0 24.0 35.0 35.0 21.0 21.0 40.0 40.0 40.0 40.0 (2.2) (2.2) (2.2) Operating temperature range: −20°C to +120°C (Include self temperature rise) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com (2.2) L9001_MPC • 9/11/2018 4 NOT FOR NEW DESIGN SMD Inductors Large-Current Power Inductors MPC Taping Specification MPC0740, 0750 Series (1,000pcs./reel) Dimensions of indented square hole plastic tape øD0 W F P2 E P0 T P1 Reel dimensions Case Size Dimensions (mm) Reel Quantity W MPC0740, 0750 Series F E P1 P2 P0 øD0 T ±0.1 ±0.1 ±0.1 ±0.1 ±0.1 ±0.05 ±0.05 7.5 1.75 12.0 2.0 4.0 1.55 0.4 W1 (1,000pcs./reel) A B CTolerance MPC0730 ±0.2 E D MPC0740 1,000 Dimensions of indented square hole plastic tape Nominal 16.0 MPC0750 øD0 P0Tolerance P2 ±0.3 24.0 ±0.1 11.5 ±0.1 1.75 ±0.1 16.0 ±0.1 2.0 ±0.1 4.0 ±0.05 1.55 ±0.05 0.4 500 Tolerance Nominal W2 ±0.2 24.0 ±0.1 11.5 ±0.1 1.75 ±0.1 24.0 ±0.1 2.0 ±0.1 4.0 ±0.05 1.55 ±0.05 0.4 500 Tolerance Nominal ±0.4 24.0 ±0.2 11.5 ±0.2 1.75 ±0.2 24.0 ±0.2 2.0 ±0.2 4.0 ±0.02 1.5 ±0.1 0.4 MPC1055 MPC1250 F 500 E Nominal MPC1040 W T P1 Reel Specifications Reel dimensions E C D A B W1 W2 Dimensions (mm) Case Size A B C D E Tolerance ±2.0 ±1.0 ±0.2 ±0.8 ±0.5 Nominal ø330 ø80 ø13.0 ø21.0 2.0 MPC1040 Tolerance Nominal ±5.0 ø330 ±5.0 ø80 ±0.5 ø13.5 ±1.0 ø21.0 ±0.5 2.0 MPC1055 Tolerance Nominal ±2.0 ø380 ±1.0 ø100 ±0.5 ø13.0 ±0.8 ø21.0 MPC1250 Tolerance Nominal ±2.0 ø380 ±5.0 ø100 ±0.5 ø13.0 ±0.8 ø21.0 MPC0730 MPC0740 MPC0750 W1 W2 ±1.0 ±1.0 R1.0 17.5 21.5 R1.0 ±2.0 24.4 ±3.0 30.4 ±0.5 2.0 R1.0 ±2.0 24.4 ±3.0 30.4 ±0.5 2.0 R1.0 ±2.0 25.5 ±3.0 28.5 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com r L9001_MPC • 9/11/2018 5 SMD Inductors NOT FOR NEW DESIGN Large-Current Power Inductors MPC Handling Precautions Inductors should be stored in normal working environments. While the inductors themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70% relative humidity. Atmospheres should be free of chlorine and sulfur bearing compounds. Temperature fluctuations should be minimized to avoid condensation on the parts. For optimized solderability, inductors’ stock should be used promptly, preferably within six months of receipt. Export Control For customers in Japan For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export. For customers outside Japan Inductors should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destruction weapons (nuclear, chemical, biological weapons or missiles), or any other weapons. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9001_MPC • 9/11/2018 6 SMD Inductors NOT FOR NEW DESIGN Large-Current Power Inductors MPC KEMET Electronics Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9001_MPC • 9/11/2018 7