MPLC0730L4R7

SMD Inductors NOT FOR NEW DESIGN Large-Current Power Inductors MPLC Overview The KEMET MPLC metal composite inductors offer large inductance values for use in DC to DC switching power supplies. These inductors offer superior permeability when compared to technologies based on ferrite cores. The round wire design allows for higher inductance compared to other wire designs. Applications • • • • • • Switching DC-DC power supplies Notebook computers Tablets Embedded computer systems HDTVs DVD and BluRay players Part Number System MPLC 0730 L 1R0 Series Size Code Inductor Inductance Code µH MPLC 0730 1040 R = decimal point Example: 1R0 = 1.0 µH One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9004_MPLC • 7/31/2018 1 NOT FOR NEW DESIGN MPLC1040L1R5 MPLC1040L2R2 MPLC1040L3R3 MPLC1040L4R7 SMD Inductors 1.5 ±20% 2.2 ±20% 3.3 ±20% 4.7 ±20% 7.0 10.0 14.0 19.0 ＊1　T=40K rise at rated current.　＊2　Inductance drop 20% at rated Large-Current Power Inductors MPLC 12.4 10.5 8.8 8.0 12.7 11.0 9.3 8.0 current. ●Operating temperature range: －20～+120 (Include self temperat ure rise) Table 1 – Ratings & Part Number Reference Inductance (µH) at 100 kHz Inductance Tolerance 1.0 ±20% 7.7 Maximum MPLC0730L1R0 8.6 8.8 19.0 7.3 8.2 MPLC0730L3R3 3.3 ±20% 30.0 5.7 6.5 MPLC0730L4R7 4.7 ±20% 41.0 2.05.0 MPLC1040L1R0 3.0 Maximum 1.0 ±20% MPLC1040L1R5 1.5 ±20% 10.0 ±0.2 MPLC1040L4R7 T = 40 K rise at rated current. Inductance drop 20% at rated current. ±20% 3.3 ±20% 4.7 ±20% 4.0 Maximum Large-Current Power Inductors MPLC Series MPLC Series [RoHS In d u c t a n c e [RoHS Compliant] Compliant] 3.0 Maximum ● MPLC1040 Series 3.0 Maximum ● MPLC1040 Series 11.5 Maximum 2.0 1.5 1.0 Irms 8.2 8.8 ＊1 (Ref.) R Isat 3R3 ＊2 a t e d c u r r e n t（A） (Ref.) 8.2 6.5 Isat 11.0 ＊2 (Ref.) 6.5 5.6 8.8 11.0 5.6 16.2 8.2 8.8 16.2 6.5 12.7 8.2 5.6 12.7 11.0 5 10 6.5 16.2 11.0 5.6 9.3 DC Current 12.7 9.3 16.2 8.0 11.0 8.0 12.7 9.3 11.0 8.0 9.3 8.0 2R2 ＊1 Irms 10.6 (Ref.) 8.6 10.6 7.3 0.5 8.6 5.7 7.3 0.0 5.0 0 5.7 14.3 5.0 12.4 14.3 10.5 8.0 12.4 8.8 10.5 8.0 8.8 8.0 1R5 1R0 15 20 (A) 3.5 2.0 3.9 2.0 3.9 2.0 3.8 6.0 3.8 6.03.8 6.0 3.8 3.8 3.9 3.9 3.8 [mm] (2.1) 3.8 [mm] (2.1) 4.0 Maximum DC-Superposed Characteristics [mm] (2.1) 4.0 Maximum 11.0 (Ref.) 4R7 R a t e d c u11.0 r8.8 r e n t（A） 2.0 2.0 2.0 [mm] (2.1) 4.0 Maximum 4.0 Maximum Isat 2.5 2.02.0 4.0 ±0.1 4.0 ±0.1 4.0 ±0.1 4.0 ±0.1 10.0 ±0.210.0 ±0.2 10.0 ±0.2 10.0 ±0.2 MPLC1040 Irms 10.6 (Ref.) 8.6 10.6 7.3 8.6 7.3 5.7 5.7 5.0 14.35.0 14.3 12.4 12.4 10.5 10.5 8.8 8.8 8.0 MPLC1040 Series (1.4) ● MPLC1040 Series MPLC1040 Series MPLC1040 Series ● ● ● 3.0 Maximum 11.5 Maximum ＊2 Isat R a t e d c u r r e n t（A） (Ref.) (1.4) 3.0 Maximum (1.4) (1.4) 11.5 Maximum 11.5 Maximum ＊2 3.0 ＊1 (Ref.) MPLC0730 Series ● 3.2 ±0.1 3.2 ±0.1 MPLC0730 ●MPLC1040 ● MPLC1040 Series Series 3.2 ±0.1 6.7 ±0.2 6.7 ±0.2 6.7 ±0.2 6.7 ±0.2 7.7 Maximum MPLC1040 Land Pattern 7.7 Maximum 3.2 ±0.1 ● MPLC0730 Series 3.8 Recommended RecommendedLand LandPattern Pattern MPLC0730 Recommended Land Pattern MPLC0730Series Series MPLC0730 Series ●● Recommended Land Pattern ● Dimensions (mm) ● MPLC0730 Series Shape and Dimensions 7.7 Maximum 7.7 Maximum 6.0 4.6 Part Number Shape and Dimensions 7.0 14.0 10.0 19.0 14.0 19.0 current. ure rise) current. ure rise) Power Inductors VOL.11 Shape and Dimensions Shape and Dimensions ● MPLC0730 Series Series ● MPLC0730 3.8 3.5 ure rise) ＊1　T=40K rise at rated current.　＊2　Inductance drop 20% at rated MPLC1040L4R7 4.7 ±20% ●Operating temperature range: －20～+120 (Include self temperat ＊1　T=40K rise at rated current.　＊2　Inductance drop 20% at rated ●Operating temperature range: －20～+120 (Include self temperat 8.0 4.6 Dimensions 19.0 1.5 ±20% ±20% current. 3.3 2.2 ±20% current.±20% ure rise) 4.7 3.3 ±20% 8.0 ＊13.5 3.5 4.7 ±20% MPLC1040L1R5 ＊1　T=40K rise at rated current.　＊2　Inductance drop 20% at rated ●Operating temperature range: －20～+120 (Include self MPLC1040L4R7 temperat MPLC1040L3R3 ●Operating temperature range: －20～+120 (Include self temperat 9.3 R a t e d c u r r e n t（A） 4.6 MPLC1040L4R7 ＊1　T=40K rise at rated current.　＊2　Inductance drop MPLC1040L3R3 20% at rated MPLC1040L2R2 11.0 8.8 4.0 Irms 3.5 3.5 10.5 4.5 4.6 Inductance (µH) 4R7 DC resistance at 100kHz, 1mA [RoHS Compliant] In d u c t a n c e （mΩ） max. [RoHS Compliant] （μH） DC resistance 3.0 Model at 100kHz, 1mA （mΩ） max. MPLC0730L1R0 1.0 ±20% 9.0 3R3 （μH） ･ Precautions (see page 80) 2.5 MPLC0730L1R5 1.5 ±20% MPLC0730L1R0 1.0 ±20% In d u c t a n c e 15.0 9.0 ･ Precautions (see page 80) DC resistance 2R2 19.015.0 Model at 100kHz, 1mA MPLC0730L2R2 2.2 ±20% MPLC0730L1R52.0 1.5 ±20% （mΩ） max. In d（μH） uctance DC resistance MPLC0730L2R21.5 2.2 ±20% 19.0 MPLC0730L3R3 3.3 ±20% 30.0 Model at 100kHz, 1mA 1R5 MPLC0730L1R0 1.0 ±20% 9.0 max. （mΩ） （μH） 41.030.0 1R0 MPLC0730L3R31.0 3.3 ±20% MPLC0730L4R7 4.7 ±20% MPLC0730L1R5 1.5 ±20% 15.0 MPLC0730L1R0 1.0 ±20% 9.0 MPLC0730L4R7 4.7 ±20% MPLC1040L1R0 1.0 ±20% 5.541.0 MPLC0730L2R2 2.2 ±20% 19.0 0.5 MPLC0730L1R5 1.5 ±20% 15.0 MPLC1040L1R0 1.0 ±20% 5.5 MPLC0730L3R3 3.3 ±20% 30.0 MPLC1040L1R5 1.5 ±20% 7.0 MPLC0730L2R2 2.2 ±20% 19.0 MPLC0730L4R7 4.7 ±20% 41.0 MPLC1040L1R50.0 0 1.55±20% MPLC1040L2R2 2.2 ±20% 10.0 7.0 10 15 MPLC0730L3R3 3.3 ±20% 30.0 MPLC1040L1R0 1.0 ±20% 5.5 MPLC1040L2R2 2.2 ±20% 10.0 MPLC0730L4R7 4.7 ±20% 14.0 41.0 MPLC1040L3R3 3.3 ±20% DC Current (A)1.5 MPLC1040L1R5 ±20% 7.0 MPLC1040L3R3 3.3 ±20% 14.0 MPLC1040L1R0 1.0 ±20% 19.0 5.5 MPLC1040L4R7 4.7 ±20% MPLC1040L2R2 2.2 ±20% 10.0 Model 5.0 Inductance (µH) ･ Precautions (see page 80) 10.0 14.0 SMD Type SMD Type Large-Current Power Inductors MPLC0730 [RoHS Compliant] 5.0 Large-Current Power Inductors 4.0 12.7 SMD Type [mm] MPLC Series [RoHS [RoHS Compliant] Compliant] 4.5 16.2 12.4 SMD Type Large-Current Power Inductors Large-Current Power Inductors MPLC Series DC-Superposed Characteristics DC-Superposed Characteristics ･ Precautions (see page 80) MPLC1040 Series ●7.0 19.0 (2.1) 2.0 5.6 3.9 14.3 4.6 2.2 5.5 4.0 ±0.1 11.5 Maximum (1.4) 3.5 ±20% ±20% MPLC1040L3R3 14 15.0 11.0 1.5 MPLC1040L2R2 2 10.6 2.2 ●MPLC1040 Series 1 9.0 MPLC0730L2R2 6.7 ±0.2 MPLC0730L1R5 Recommended Land Pattern DC Resistance MPLC0730 Series Rated Current (A) ● (mΩ) Maximum Irms1 (Ref.) Isat2 (Ref.) 3.2 ±0.1 Shape and Dimensions ● MPLC0730 Series Part Number 6.0 3.8 DC-Superposed Characteristics DC-Superposed Characteristics MPLC0730 MPLC1040 Operating temperature range: −20°C to +120°C (Include self temperature rise) DC-Superposed Characteristics 5.0 4.5 5.0 MPLC0730 4.5 MPLC1040 MPLC0730 4.5 3.5 4.0 3.0 3.5 2.5 3.0 4R7 2.0 2.5 1.5 2.0 1.0 5.0 MPLC1040 4.5 FL 33301 USA • 954-766-2800 • www.kemet.com Fort Lauderdale, 5.0 5.0 4.5 3.5 3.0 4R7 3R3 3R3 4.5 2R2 2R2 1R5 ce (µH) 3.5 4.0 3R3 H) H) 4.0 ce (µH) 4.5 4R7 4.0 3.5 1R0 4.0 3.5 3.0 Inductance ductance (µH) (µH) 5.0 Inductance ductance (µH) (µH) 5.0 5.0 4.0 4.0 MPLC0730 MPLC1040 © KEMET Electronics Corporation • KEMET Tower4R7• One East Broward Boulevard 4.5 3.5 4.0 3.0 3.5 2.5 3.0 2.0 2.5 1.5 2.0 1.0 L9004_MPLC • 7/31/2018 4R7 4R7 4R7 3R3 3R3 4R7 2R2 1R5 3R3 2R2 1R0 2 NOT FOR NEW DESIGN SMD Type SMD Inductors Large-Current Power Inductors MPLC Taping Specification MPLC0730 Series (1000pcs./reel) Dimensions of indented square hole plastic tape F P0 T P2 E1 D0 REEL C 0.5 øT 13.5 ±0.05 D 0.8 ø 21.0 2.0 0.4 E 1 ±0.050.1 0.41.75 P1 0.1 16.0 C 0.5 1 øE13.5 0.1 1.75 D 0.8 Pø 121.0 0.1 16.0 P0 0.1 4.0 øD 0 0.05 1.55 r W P1 W2 D REEL 500 Tolerance Nominal ±0.3 24.0 W1 Reel Specifications P2 E1 ±0.1 7.5 D0 F ±0.1 1.75 ±0.1 11.5 1R0L Lot No. ±0.3 16.0 B 1,000 T P0 Tolerance Nominal Ａ Dimensions (mm) ±0.1 1.75 P1 ±0.1 E1 12.0 W 4.0 ±0.1 0.3±0.1 2.0 24.04.0 ±0.1 16.0 W 0 A MPLC0730 Series (1000pcs./reel) Case Reel Size Quantity W tape F Dimensions ofA indented square hole plastic C MPLC1040 B 5.0 5.0 P2ø 380 P0 ø80øD0 ±0.1 ±0.1 ±0.05 P2 0.1 2.0 REEL Reel dimensions MPLC0730 P1 0.1 16.0 F 0.1 11.5 W 1R0L Lot No. SMD Type E1 0.1 1.75 W 0.3 24.0 1.55 F 0.1 ±0.05 11.5 1.55 A 0 1 0.5 2.0 R1.0 0.5 25.5 P2 0.1 2.0 P0 0.1 4.0 øD 0 0.05 1.55 r W REEL MPLC1040 Series P (500pcs./reel) 1 Reel dimensions Dimensions of indented square holeW2plastic tape F P0 T Ａ 5.0 øW380 0.3 24.0 B 5.0 F ø80 0.1 11.5 Ａ 2.0r ø 330 B W1 1.0 ø80 ±1.0 E1 D0 D A C REEL B A0 P2 A 0 1 0.5 øD 025.5 0.05 1.55 P 0 R1.0 0.1 4.0 1R0L Lot No. 3° W 0.5 P 2 2.0 0.1 2.0 W1 Reel dimensions Case MPLC1040 Series Size P1 W2 (500pcs./reel) A B Dimensions (mm) C D ±0.5 ø13.0 ±0.8 F ø21.0 ±0.5 E1 2.0 D0 ±0.8 ø21.0 ±0.5 2.0 Dimensions ofA0indented square hole plastic tape C MPLC1040 Tolerance REEL Nominal P0 ±5.0 D ø330 ±5.0 ø80 A T Tolerance Nominal B MPLC0730 ±2.0 ø330 ±1.0 ø80 P2 R1.0 W  0.3 R1.0 24.0 17.5 F ±2.0 0.1 24.4 11.5 Ａ 2.0 ø 330 B 1.0 ø80 C W20.5 ø 13.5 ±1.0 21.5 ±3.0 E 1 0.1 30.4 1.75 D 0.8 ø 21.0 P1 0.1 16.0 A r 0 W 1 0.5 2.0 2.0 24.4 R1.0 P2 0.1 2.0 P0 0.1 4.0 øD 0 0.05 1.55 r W 3° 1R0L Lot No. W1 ±0.5 ø13.5 A0 W REEL REEL P1 Reel dimensions D © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com W1 C 0.5 ø 13.5 D 0.8 ø 21.0 A 0 0.5 2.0 L9004_MPLC • 7/31/2018 1 2. 24.4 R1.0 A C B A0 W2 3 SMD Inductors NOT FOR NEW DESIGN Large-Current Power Inductors MPLC Handling Precautions Inductors should be stored in normal working environments. While the inductors themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70% relative humidity. Atmospheres should be free of chlorine and sulfur bearing compounds. Temperature fluctuations should be minimized to avoid condensation on the parts. For optimized solderability, inductors’ stock should be used promptly, preferably within six months of receipt. Export Control For customers in Japan For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export. For customers outside Japan Inductors should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destruction weapons (nuclear, chemical, biological weapons or missiles), or any other weapons. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9004_MPLC • 7/31/2018 4 SMD Inductors NOT FOR NEW DESIGN Large-Current Power Inductors MPLC KEMET Electronics Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9004_MPLC • 7/31/2018 5