SMD Inductors
Large-Current Power Inductors MPLCG
Overview
Applications
The KEMET MPLCG metal composite inductors are
ideal for use in DC to DC switching power supplies. The
MPLCG’s small size makes it ideal for applications with
tight space requirements. The combination of composite
core material and round wire allows these inductors to be
used in applications with high switching frequencies and
where efficiency is important.
• Switching DC-DC power supplies
• Notebook computers
• Tablets
• Embedded computer systems
• Servers and storage
• HDTVs
Benefits
• Metal composite powder
• Operating temperature up to +125°C
• High inductance
• Low DCR
• Low profile 3 mm maximum
• Low core loss
• Low acoustic noise
Part Number System
MPLCG
0530
L
R22
Series
Size Code
Inductor
Inductance Code µH
MPLCG
0530
0630
R = decimal point
Examples:
R22 = 0.22 µH
1R0 = 1.0 µH
One world. One KEMET
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
L9005_MPLCG • 3/26/2019
1
SMD Inductors
Large-Current Power Inductors MPLCG
Performance Characteristics
Item
Operating Temperature
Rated Inductance Range
Inductance Tolerance
Rated DC Resistance Range
Rated Current Range
Performance Characteristics
–40°C to +125°C (including self-temperature rise)
0.22 – 4.70 µH at 100 kHz, 1 mA
±20%
2.7 – 74.0 mΩ maximum
4.5 – 14.1 A
Table 1 – Ratings & Part Number Reference
Part Number
Inductance (µH)
at 100 kHz, 1 mA
Inductance
Tolerance
DC Resistance
(mΩ) Maximum
MPLCG0530LR22
0.22
±20%
MPLCG0530LR33
0.33
±20%
Rated Current (A)
Irms1 (Ref.)
Isat2 (Ref.)
3.7
14.1
10.2
7.3
10.3
8.9
MPLCG0530LR47
0.47
±20%
8.4
9.5
8.9
MPLCG0530LR68
0.68
±20%
11.6
7.9
6.8
MPLCG0530L1R0
1.00
±20%
14.6
7.4
5.6
MPLCG0530L1R5
1.50
±20%
21.7
5.9
5.6
MPLCG0530L2R2
2.20
±20%
36.4
4.5
5.0
MPLCG0530L3R3*
3.30
±20%
58.0
3.6
3.1
MPLCG0530L4R7*
4.70
±20%
74.0
3.1
3.0
MPLCG0630LR22*
0.22
±20%
2.7
21.4
17.9
MPLCG0630LR33*
0.33
±20%
4.3
16.9
17.3
MPLCG0630LR47
0.47
±20%
5.0
15.8
15.6
MPLCG0630LR68*
0.68
±20%
6.0
14.2
12.6
MPLCG0630LR82*
0.82
±20%
7.0
13.1
11.8
MPLCG0630L1R0
1.00
±20%
9.0
11.9
11.3
8.3
MPLCG0630L1R5
1.50
±20%
15.0
9.9
MPLCG0630L2R2
2.20
±20%
19.0
8.2
7.8
MPLCG0630L3R3
3.30
±20%
30.0
6.5
6.3
MPLCG0630L4R7
4.70
±20%
41.0
5.5
5.4
T = 40 K rise at rated current
Inductance drop 20% at rated current
All electrical characteristics data is referenced to 20°C.
* This part is not for new design.
1
2
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
L9005_MPLCG • 3/26/2019
2
SMD Inductors
Large-Current Power Inductors MPLCG
SMD
DC-Superposed Characteristics
3.0
Large-Current Power Inductors
MPLCG Series
MPLCG06
MPLCG05
[RoHS
[RoHS Compliant]
Compliant]
2R2
SMD Type
5.0
1R5
Large-Current Power
Inductors
1R0
MPLCG Series
R68
In ducta n ce
D C re sis ta n ce
(μH)
RD C(m Ω)m ax.
at 100kHz
MPLCG0530LR22
0.22±20%
3.7
4.0
MPLCG0530LR33
0.33±20%
7.3
MPLCG0530L1R 0
1.0±20%
14.6
MPLCG0530L1R 5
1.5±20%
21.7
MPLCG0530L2R2
2.2±20%
36.4
MPLCG0630L1R 0
1.0±20%
9.0
MPLCG0630L1R 5
1.5±20%
15.0
3.0
MPLCG0630L2R2
2.2±20%
19.0
Rated cu rr e n t(A)
D C MPLCG0630L3R3
re sis ta n ce
3.3±20%
30.0
Irms *1
Is at *2
RD C(m
Ω)m ax.
MPLCG0630L4R7
4.7±20% (Ref.)
41.0
(Ref.)
3.7
14.1
10.2
*1 T=40K
ris e at rated c urr e n t. *2 I n d u cta n ce d rop 20% at
rated c urr e n t.
●Ope rati ng te m7.3
pe rat ur e ra ng e: -20~+120 (I 10.3n cl u de s elf te m pe rat ur8.9
e ris e)
14.6
7.4
5.6
21.7
5.9
5.6
2.0
36.4
4.5
5.0
Shape and Dimensions
9.0
11.9
11.3
(1.1)
5.5 Maximum
SMD
Type
3.0 Maximum
15.0
9.9
8.3
● MPLCG0530 SMD Type
19.0
8.2
7.8
30.0
6.5
6.3
41.0
5.5
5.4
Part No.
1.0
R47
R33
R22
In ducta n ce
Large-Current Power Inductors
Large-Current Power Inductors
MPLCG Series
MPLCG
Series
[RoHS
[RoHS Compliant]
Compliant]
*1 T=40K
ris e at rated c urr e n t. *2 I n d u cta n ce d rop 20% at
rated c urr e n t.
●Ope rati ng te m pe rat ur e ra ng e: -20~+120 (I
n cl u de s elf te m pe rat ur e ris e)
Lot No.
5.5 Maximum
5.5 Maximum
● MPLCG0530
PL o
a rt t NNoo. .
Lot No.
2.5 ±0.2
2.5 ±0.2
3.0 Maximum
(1.1)
3.0 Maximum
(1.1)
Recommended
co mm e n deLand
d Land
Pattern
Patt e rn
● MPLCG0530
(0.1)
(0.1)
2.8
● MPLCG0630
10.2
8.9
10.2
5.6
8.9
5.6
5.6
5.0
5.6
11.3
5.0
8.3
11.3
7.8
8.3
6.3 (1.4)
7.8
5.4
6.3
Part No.
(Ref.)
(1.4)
3.2 ±0.2
Lot No.
(1.1)
(1.1)
15
(1.4)
20
(0.1)
5.4
(0.1)
● MPLCG0630
● MPLCG0630
1.7
7.5 Maximum
3.0 Maximum
(1.4)
(1.4)
2.3
1 .7
1.7
3.7
2. 0
2.0
2.0
2.0
2. 0
3.7
Power Inductors VOL.11
(0.1)
(0.1)
1.7
*2
(1.1)
DC Current (A)
Land Pattern (mm)
(1.4)
Lot No.
Is at
rr e n t(A)
(Ref.)
5.5
(1.4)
Part No.
cu
(1.4)
10
Recommended
co mm e n deLand
d Land
Pattern
Patt e rn
● MPLCG0530
3.0 Maximum
PL o
a rt t NNoo. .
3.2 ±0.2
3.2 ±0.2
14.1
10.3
14.1
7.4
10.3
5.9
7.4
4.5
5.9
(0.1)
11.9
4.5
9.9
11.9
8.2
3.0 Maximum 9.9
6.5
8.2
5.5
6.5
(Ref.)
7.5 Maximum
6.7 ±0.2
6.7 ±0.2
● MPLCG0630
*1
Rated
(Ref.)
*2
10.2
8.9
5.6
5.6
5.0
11.3
8.3
7.8
6.3
5.4
[mm]
5.0 ±0.2
5.0 ±0.2
Part No.
MPLCG0530
MPLCG0630
2.5 ±0.2
Dimensions (mm)
Irms
3.0 Maximum
5
Is at
(Ref.)
3.5
41.0
Part No.
*1
rr e n t(A)
R47
Is at
14.1
10.3
7.4
5.9
4.5
11.9
9.9
8.2
6.5
5.5
3.5
Shape and Dimensions
Shape and Dimensions
● MPLCG0530
4.7±20%
n ce d rop 20%
at
rated c urr e n t.
n cl u de s elf te m pe rat ur e ris e)
n ce d rop 20% at
rated c urr e n t.
n cl u de s elf te m pe rat ur e ris e)
Irms
7.5 Maximum
0
● MPLCG0630
Rated cu
(0.1)
2.8
MPLCG0630
*1 T=40K MPLCG0630L4R7
ris e at rated c urr e n t. *2 I n d u cta
●Ope rati ng te m pe rat ur e ra ng e: -20~+120 (I
*1 T=40K
ris e at rated c urr e n t. *2 I n d u cta
●Ope rati ng te m pe rat ur e ra ng e: -20~+120 (I
Case Size
5.0 ±0.2
DC Current (A)
20
6.7 ±0.2
Dimensions
Model
MPLCG0530LR22
MPLCG0530LR33
MPLCG0530LR22
MPLCG0530L1R 0
MPLCG0530LR33
MPLCG0530L1R 05
MPLCG0530L1R
MPLCG0530L2R2
MPLCG0530L1R
5
MPLCG0630L1R 0
MPLCG0530L2R2
MPLCG0630L1R 05
MPLCG0630L1R
MPLCG0630L2R2
MPLCG0630L1R
5
MPLCG0630L3R3
MPLCG0630L2R2
●
MPLCG0630L4R7
MPLCG0630L3R3
D C re sis ta n ce
RD C(m Ω)m ax.
PDaCr t re
N osis
. ta n ce
RD C(m Ω)m
3.7 ax.
L o t N o . 7.3
3.7
14.6
7.3
21.7
14.6
36.4
21.7
9.0
36.4
15.0
9.0
19.0
15.0
7.5 Maximum
30.0
19.0
41.0
30.0
2.5 ±0.2
2.5 ±0.2
Model
15
n ce
(μH)
In
atducta
100kHzn ce
(μH)
0.22±20%
at
100kHz
0.33±20%
0.22±20%
1.0±20%
0.33±20%
1.5±20%
1.0±20%
2.2±20%
1.5±20%
1.0±20%
2.2±20%
1.5±20%
1.0±20%
2.2±20%
1.5±20%
3.3±20%
2.2±20%
4.7±20%
3.3±20%
2.5 ±0.2
10 In ducta
(1.1)
1R0
rr e n t(A)
3.2 ±0.2
● MPLCG0530
0.0
(1.1)
3.0 Maximum
2.3
16
3.2 ±0.2
3.2 ±0.2
5
2.5 ±0.2
0
5.5 Maximum
3.2 ±0.2
0.0
Lot No.
Shape and Dimensions
[RoHS
[RoHS Compliant]
Compliant]
1R5
*1
(Ref.)
2.5 ±0.2
1.0
2R2
Rated cu
Irms
3.2 ±0.2
MPLCG0530LR22
MPLCG0530LR33
MPLCG0530L1R 0
MPLCG0530L1R 5
MPLCG0530L2R2
MPLCG0630L1R 0
MPLCG0630L1R 5
MPLCG0630L2R2
MPLCG0630L3R3
MPLCG0630L4R7
3R3
5.0 ±0.2
(μH)
at 100kHz
0.22±20%
0.33±20%
1.0±20%
1.5±20%
2.2±20%
1.0±20%
1.5±20%
2.2±20%
3.3±20%
4.7±20%
Model
4R7
6.7 ±0.2
[RoHS
[RoHS Compliant]
Compliant]
2.0
Inductance at 20°C (µH)
Inductance at 20°C (µH)
Model
[mm]
2.0[mm]
1.7
1 .7
● MPLCG0630
Recommended
co mm e n deLand
d Land
Pattern
Patt e rn
● MPLCG0530
Recommended
co mm e n deLand
d Land
Pattern
Patt e rn
● MPLCG0530
● MPLCG0630
3.5 3.5
16
2.8 2.8
Power Inductors VOL.11
1.7
2.3
1.7
1 .7
2.0
3.7
2. 0
2.0
1.7
2.3
1.7
1 .7
2.0
3.7
2. 0
2.0
Power Inductors VOL.11
Power
16 Inductors VOL.11
© KEMET Electronics
Corporation • KEMET Tower • One East Broward Boulevard
16
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
L9005_MPLCG • 3/26/2019
3
*2
SMD Inductors
Large-Current Power Inductors MPLCG
Taping Specification
Dimensions of Indented Square Hole Plastic tape
F
P2
E1
D0
REEL
2R 2
Lot No.
Part No.
W
P0
T
1R 5
REEL
P1
Reel Dimensions
W2
Dimensions (mm)
Case
Reel
Size
Quantity
Dimensions
ofAIndented Square
HoleWPlasticFtape E
C
P1
P2
P0
1
D
0
C
D
MPLCG0630
T
3,500
Nominal
REEL
±0.1 E
1
8.0
±0.1
2.0
±0.1
4.0
±0.05
1.55
±0.05
0.4
±0.1
7.5
±0.1
1.75
±0.1
12.0
±0.1
2.0
±0.1
4.0
±0.05
1.55
±0.05
0.4
Lot No.
Reel Specifications
T
±0.1
1.75
A
B
±0.3
W1 16.0
øD0
±0.1
5.5 D0
P2
Part No.
Tolerance
Nominal
2,000
Enlarged
View
±0.3
12.0
F
W
MPLCG0530
A0
P0
Tolerance
2R 2
1R 5
REEL
P1
Reel Dimensions
D
A0
C
A
C
B
A0
W2
D
Enlarged
View
W1
Dimensions (mm)
Case
Size
A
B
C
D
MPLCG0530
Tolerance
Nominal
±5.0
ø380
±10.0
ø95
±1.0
ø13.5
±0.8
ø21.0
±0.5
2.0
A0
±1.5
14.5
±2.0
18.5
MPLCG0630
Tolerance
Nominal
±5.0
ø380
±10.0
ø95
±1.0
ø13.5
±0.8
ø21.0
±0.5
2.0
±1.0
18.0
±1.5
21.6
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
W1
W2
L9005_MPLCG • 3/26/2019
4
SMD Inductors
Large-Current Power Inductors MPLCG
Soldering Process
Recommended Reflow Soldering Profile
Reference ICP/JEDEC J-STD-020E
Pb-Free Assembly
Preheat/Soak
Temperature Minimum (TSmin)
Temperature Maximum (TSmax)
Time (ts) from Tsmin to Tsmax
150°C
200°C
60 – 120 seconds
Ramp-up Rate (TL to TP)
3°C/second maximum
Liquidous Temperature (TL)
217°C
Time Above Liquidous (tL)
60 – 150 seconds
Peak Temperature (TP)
250°C
Time within 5°C of Maximum Peak
Temperature (tP)
30 seconds maximum
Ramp-down Rate (TP to TL)
6°C/second maximum
Time 25°C to Peak Temperature
8 minutes maximum
TP
TL
Temperature
Profile Feature
tP
Maximum Ramp-up Rate = 3°C/second
Maximum Ramp-down Rate = 6°C/second
tL
Tsmax
Tsmin
25
ts
25°C to Peak
Time
Handling Precautions
Inductors should be stored in normal working environments. While the inductors themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and
long term storage.
KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70%
relative humidity. Atmospheres should be free of chlorine and sulfur bearing compounds. Temperature fluctuations should
be minimized to avoid condensation on the parts. For optimized solderability, inductors’ stock should be used promptly,
preferably within six months of receipt.
Export Control
For customers in Japan
For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export
license specified by the law is required for export.
For customers outside Japan
Inductors should not be used or sold for use in the development, production, stockpiling or utilization of any conventional
weapons or mass-destruction weapons (nuclear, chemical, biological weapons or missiles), or any other weapons.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
L9005_MPLCG • 3/26/2019
5
SMD Inductors
Large-Current Power Inductors MPLCG
KEMET Electronics Corporation Sales Offices
For a complete list of our global sales offi ces, please visit www.kemet.com/sales.
Disclaimer
All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes
no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury
or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
L9005_MPLCG • 3/26/2019
6
很抱歉,暂时无法提供与“MPLCG0530LR22”相匹配的价格&库存,您可以联系我们找货
免费人工找货