MPX1D1770L1R5

SMD Inductors Metal Composite Power Inductors MPX Overview Applications The KEMET MPX metal composite inductors are ideal for use in DC to DC switching power supplies, as power inductors as well as EMI filter inductors. The metal composite core has high saturation characteristics maintaining function in rush current mode and characterized by temperature stable inductance. Consumer and commercial power applications such as: • High frequency DC-DC converters, including WBG GaN applications • PCs and servers • Points of loads (POL) • Field-programmable gate arrays (FPGA) • Battery powered regulators Benefits • Metal composite powder • Shielded construction, SMD configuration • Inductance range from 0.10 – 100.00 µH • Operating temperature up to +155°C • Low acoustic noise • Low magnetic flux leakage Part Number System MPX Version Series MPX 1 D0520 L 1R5 Size Code Inductor Inductance Code µH D0520 = 5x5x2.0 mm D0530 = 5x5x3.0 mm D0618 = 6x6x1.8 mm D0624 = 6x6x2.4 mm D0630 = 6x6x3.0 mm D0650 = 6x6x5.0 mm D0830 = 8x8x3.0 mm D0840 = 8x8x4.0 mm D1040 = 10x10x4.0 mm D1235 = 12x12x3.5 mm D1250 = 12x12x5.0 mm D1264 = 12x12x6.4 mm D1740 = 17x17x4.0 mm D1770 = 17x17x7.0 mm D2213 = 22x22x13.0 mm   The first two digits represent the inductance value. The third digit inidcates the number of zeros to be added. R = decimal point Examples: 100 = 10.00 μH R68 = 0.68 µH 1R5 = 1.50 µH 101 = 100.00 µH One world. One KEMET © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9012_MPX • 11/28/2023 1 SMD Inductors Metal Composite Power Inductors MPX Performance Characteristics Item Performance Characteristics Operating Temperature Rated Inductance Range Inductance Tolerance Rated DC Resistance Range Rated Current Range −55°C to +155°C (including self-temperature rise) 0.10 – 100.00 µH at 100 kHz, 1 mA ±20% 0.52 - 341.2 mΩ maximum 2 – 92 A Table 1 – Ratings & Part Number Reference  Part Number Inductance (µH) at 100 kHz, 1 mA Inductance Tolerance DC Resistance (mΩ) Typical DC Resistance (mΩ) Maximum MPX1D0520LR15 0.15 ±20% 3.4 3.9 MPX1D0520LR22 0.22 ±20% 4.3 MPX1D0520LR33 0.33 ±20% 5.3 MPX1D0520LR47 0.47 ±20% 6.7 MPX1D0520LR68 0.68 ±20% MPX1D0520L1R0 1.00 MPX1D0520L1R5 Rated Current (A) Weight (g) Irms1 (Reference) Isat2 (Reference) Isat3 (Reference) 16.9 15.5 22.0 0.23 5.0 15.0 14.5 19.0 0.23 6.2 13.4 11.0 16.0 0.23 7.8 12.0 9.0 14.0 0.23 10.6 12.2 9.5 7.5 11.0 0.23 ±20% 16.4 18.9 7.6 7.0 9.0 0.23 1.50 ±20% 30.9 35.6 5.6 4.5 7.0 0.23 MPX1D0520L2R2 2.20 ±20% 35.1 40.4 5.2 4.5 6.5 0.23 MPX1D0520L3R3 3.30 ±20% 55.8 64.2 4.1 3.5 5.5 0.23 MPX1D0520L4R7 4.70 ±20% 84.0 96.6 3.4 3.5 4.5 0.23 MPX1D0520L6R8 6.80 ±20% 113.4 130.5 2.9 2.5 4.0 0.23 0.23 MPX1D0520L100 10.00 ±20% 193.7 222.8 2.2 2.5 3.5 MPX1D0530LR15 0.15 ±20% 2.4 2.8 22.0 15.0 21.0 0.33 MPX1D0530LR22 0.22 ±20% 3.4 3.9 18.4 11.0 16.0 0.33 MPX1D0530LR33 0.33 ±20% 4.5 5.2 16.0 10.5 15.0 0.33 MPX1D0530LR47 0.47 ±20% 6.0 6.9 13.8 9.0 13.0 0.33 MPX1D0530LR68 0.68 ±20% 7.1 8.2 12.6 8.0 12.0 0.33 MPX1D0530L1R0 1.00 ±20% 10.0 11.5 10.7 7.5 10.5 0.33 MPX1D0530L1R5 1.50 ±20% 15.3 17.7 8.6 5.5 8.0 0.33 MPX1D0530L2R2 2.20 ±20% 21.4 24.6 7.3 4.5 6.5 0.33 MPX1D0530L3R3 3.30 ±20% 37.2 42.8 5.5 4.0 5.5 0.33 MPX1D0530L4R7 4.70 ±20% 54.1 62.2 4.6 3.0 4.5 0.33 MPX1D0530L6R8 6.80 ±20% 93.7 107.8 3.5 2.5 4.0 0.33 MPX1D0530L100 10.00 ±20% 121.8 140.1 3.1 2.5 3.5 0.33 MPX1D0530L150 15.00 ±20% 186.5 214.6 2.5 2.0 3.0 0.33 MPX1D0530L220 22.00 ±20% 296.6 341.2 2.0 1.8 2.5 0.33 MPX1D0618LR10 0.10 ±20% 2.4 2.8 18.9 Part Number Inductance (µH) at 100 kHz, 1 mA Irms 1 Inductance Tolerance DC Resistance DC Resistance (mΩ) Typical (mΩ) Maximum 22.5 40.0 Isat Isat 2 Rated Current (A) 0.37 3 Weight (g) T = 40 K rise at rated current Inductance drop 20% at rated current 3 Inductance drop 30% at rated current All electrical characteristics data is referenced to 25°C. 1 2 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9012_MPX • 11/28/2023 2 SMD Inductors Metal Composite Power Inductors MPX Table 1 – Ratings & Part Number Reference cont.  Part Number Inductance (µH) at 100 kHz, 1 mA Inductance Tolerance DC Resistance (mΩ) Typical DC Resistance (mΩ) Maximum Rated Current (A) Irms1 (Reference) Isat2 (Reference) Isat3 (Reference) Weight (g) MPX1D0618LR15 0.15 ±20% 3.2 3.8 16.2 20.0 30.0 0.37 MPX1D0618LR22 0.22 ±20% 4.6 5.3 13.7 16.0 26.0 0.37 MPX1D0618LR33 0.33 ±20% 5.3 6.1 12.7 15.0 20.0 0.37 MPX1D0618LR47 0.47 ±20% 7.4 8.5 10.7 11.0 17.0 0.37 MPX1D0618LR68 0.68 ±20% 11.0 12.7 8.8 9.0 13.0 0.37 MPX1D0618L1R0 1.00 ±20% 16.7 19.3 7.1 8.0 11.0 0.37 MPX1D0618L1R5 1.50 ±20% 22.4 25.8 6.2 6.5 10.5 0.37 MPX1D0618L2R2 2.20 ±20% 29.4 33.8 5.4 6.0 9.0 0.37 MPX1D0618L3R3 3.30 ±20% 53.4 61.5 4.0 4.5 6.5 0.37 MPX1D0618L4R7 4.70 ±20% 72.5 83.4 3.4 4.0 6.0 0.37 MPX1D0624LR10 0.10 ±20% 1.5 1.8 26.6 25.0 42.0 0.50 MPX1D0624LR15 0.15 ±20% 2.0 2.3 23.2 20.5 37.0 0.50 MPX1D0624LR22 0.22 ±20% 2.8 3.3 19.4 19.5 29.0 0.50 MPX1D0624LR33 0.33 ±20% 3.6 4.2 17.2 17.5 22.5 0.50 MPX1D0624LR47 0.47 ±20% 4.5 5.2 15.4 14.5 20.0 0.50 MPX1D0624LR68 0.68 ±20% 6.7 7.8 12.6 11.5 16.0 0.50 MPX1D0624L1R0 1.00 ±20% 9.1 10.5 10.8 9.0 13.0 0.50 MPX1D0624L1R5 1.50 ±20% 16.1 18.5 8.1 7.0 10.0 0.50 MPX1D0624L2R2 2.20 ±20% 26.6 30.7 6.3 6.0 9.0 0.50 MPX1D0624L3R3 3.30 ±20% 29.4 33.8 6.0 5.0 8.0 0.50 MPX1D0624L4R7 4.70 ±20% 44.0 50.6 4.9 5.5 6.5 0.50 MPX1D0624L6R8 6.80 ±20% 58.6 67.4 4.3 4.5 5.5 0.50 MPX1D0624L100 10.00 ±20% 98.4 113.2 3.3 3.5 4.5 0.50 MPX1D0630LR10 0.10 ±20% 1.3 1.5 31.1 35.0 50.0 0.62 MPX1D0630LR15 0.15 ±20% 1.6 1.9 27.6 24.0 40.0 0.62 MPX1D0630LR22 0.22 ±20% 2.2 2.6 23.3 22.0 33.0 0.62 MPX1D0630LR33 0.33 ±20% 2.7 3.2 21.1 17.0 25.0 0.62 MPX1D0630LR47 0.47 ±20% 3.5 4.0 18.7 15.0 21.0 0.62 MPX1D0630LR68 0.68 ±20% 5.3 6.2 15.1 11.5 17.0 0.62 MPX1D0630L1R0 1.00 ±20% 7.1 8.2 13.1 9.0 13.0 0.62 MPX1D0630L1R5 1.50 ±20% 11.0 12.7 10.5 7.0 11.0 0.62 MPX1D0630L2R2 2.20 ±20% 15.9 18.3 8.7 6.5 9.0 0.62 MPX1D0630L3R3 3.30 ±20% 26.3 30.3 6.8 5.0 7.0 0.62 MPX1D0630L4R7 4.70 ±20% 31.8 36.7 6.2 4.5 6.5 0.62 MPX1D0630L6R8 6.80 ±20% 44.2 50.9 5.2 4.0 5.5 0.62 MPX1D0630L100 10.00 ±20% 67.8 78.0 4.2 3.5 4.5 0.62 MPX1D0630L150 15.00 ±20% 113.2 130.2 3.3 3.0 4.0 0.62 MPX1D0630L220 22.00 ±20% 162.0 186.3 2.7 2.5 3.5 0.62 Irms1 Isat2 Isat3 Inductance (µH) Inductance DC Resistance DC Resistance Part Number at 100 kHz, 1 Tolerance (mΩ) Typical (mΩ) Maximum mA 1 T = 40 K rise at rated current 2 Inductance drop 20% at rated current 3 Inductance drop 30% at rated current All electrical characteristics data is referenced to 25°C © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Rated Current (A) Weight (g) L9012_MPX • 11/28/2023 3 SMD Inductors Metal Composite Power Inductors MPX Table 1 – Ratings & Part Number Reference cont.  Part Number Inductance (µH) at 100 kHz, 1 mA Inductance Tolerance DC Resistance (mΩ) Typical MPX1D0650LR68 0.68 ±20% 3.6 MPX1D0650L1R0 1.00 ±20% 5.1 MPX1D0650L1R5 1.50 ±20% 7.2 MPX1D0650L2R2 2.20 ±20% MPX1D0650L3R3 3.30 ±20% MPX1D0650L4R7 4.70 ±20% MPX1D0650L6R8 6.80 ±20% MPX1D0650L100 10.00 ±20% MPX1D0830LR22 0.22 MPX1D0830LR33 MPX1D0830LR47 DC Resistance (mΩ) Maximum Rated Current (A) Isat3 (Reference) Weight (g) Irms1 (Reference) Isat2 (Reference) 4.1 18.8 12.0 17.0 6.0 15.6 9.0 13.0 1.05 8.3 13.2 7.5 12.0 1.05 10.0 11.6 11.2 7.0 10.0 1.05 16.4 18.9 8.7 5.0 8.0 1.05 27.8 32.0 6.7 4.5 6.5 1.05 38.4 44.2 5.7 4.0 5.5 1.05 53.4 61.4 4.8 3.5 4.5 1.05 ±20% 1.6 1.9 30.7 27.0 43.0 1.07 0.33 ±20% 2.3 2.7 25.8 22.5 35.0 1.07 0.47 ±20% 2.7 3.1 24.0 20.5 30.0 1.07 MPX1D0830LR68 0.68 ±20% 3.8 4.4 20.1 20.0 28.0 1.07 MPX1D0830L1R0 1.00 ±20% 5.0 5.7 17.6 16.0 23.0 1.07 MPX1D0830L1R5 1.50 ±20% 7.9 9.1 14.0 13.0 18.0 1.07 MPX1D0830L2R2 2.20 ±20% 11.8 13.6 11.4 11.0 14.0 1.07 MPX1D0830L3R3 3.30 ±20% 19.4 22.3 8.9 9.0 12.5 1.07 MPX1D0830L4R7 4.70 ±20% 25.8 29.7 7.7 7.5 10.5 1.07 MPX1D0830L6R8 6.80 ±20% 32.9 37.9 6.8 7.5 10.0 1.07 MPX1D0830L100 10.00 ±20% 53.6 61.7 5.4 5.5 8.0 1.07 MPX1D0830L150 15.00 ±20% 82.3 94.6 4.3 4.5 6.5 1.07 MPX1D0830L220 22.00 ±20% 116.9 134.5 3.6 3.5 5.0 1.07 MPX1D0830L330 33.00 ±20% 199.6 229.5 2.8 3.0 4.0 1.07 MPX1D0840LR22 0.22 ±20% 1.2 1.5 35.4 35.0 53.0 1.45 MPX1D0840LR33 0.33 ±20% 2.0 2.4 27.7 30.0 45.0 1.45 MPX1D0840LR47 0.47 ±20% 2.3 2.7 25.8 26.0 38.0 1.45 MPX1D0840LR68 0.68 ±20% 3.1 3.6 22.4 20.5 30.0 1.45 MPX1D0840L1R0 1.00 ±20% 3.6 4.2 20.8 19.5 28.0 1.45 MPX1D0840L1R5 1.50 ±20% 5.8 6.8 16.2 14.0 19.0 1.45 MPX1D0840L2R2 2.20 ±20% 7.5 8.7 14.3 13.0 17.0 1.45 MPX1D0840L3R3 3.30 ±20% 12.1 14.0 11.3 11.0 15.0 1.45 MPX1D0840L4R7 4.70 ±20% 20.4 23.5 8.7 7.5 11.0 1.45 MPX1D0840L6R8 6.80 ±20% 29.0 33.4 7.3 6.5 9.0 1.45 MPX1D0840L100 10.00 ±20% 43.1 49.6 6.0 5.5 7.5 1.45 1.05 MPX1D0840L150 15.00 ±20% 56.5 65.0 5.2 4.5 6.5 1.45 MPX1D0840L220 22.00 ±20% 85.4 98.3 4.2 4.0 5.5 1.45 MPX1D0840L330 33.00 ±20% 134.1 154.2 3.4 3.5 4.5 1.45 MPX1D0840L470 47.00 ±20% 197.1 226.7 2.8 2.5 3.5 1.45 Irms1 Isat2 Isat3 Part Number Inductance (µH) at 100 kHz, 1 mA Inductance Tolerance DC Resistance DC Resistance (mΩ) Typical (mΩ) Maximum Rated Current (A) Weight (g) T = 40 K rise at rated current Inductance drop 20% at rated current 3 Inductance drop 30% at rated current All electrical characteristics data is referenced to 25°C 1 2 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9012_MPX • 11/28/2023 4 SMD Inductors Metal Composite Power Inductors MPX Table 1 – Ratings & Part Number Reference cont.  Part Number Inductance (µH) at 100 kHz, 1 mA Inductance Tolerance DC Resistance (mΩ) Typical DC Resistance (mΩ) Maximum MPX1D1040LR22 0.22 ±20% 1.4 MPX1D1040LR33 0.33 ±20% 1.6 MPX1D1040LR47 0.47 ±20% MPX1D1040LR68 0.68 MPX1D1040L1R0 1.00 MPX1D1040L1R5 Rated Current (A) Weight (g) Irms1 (Reference) Isat2 (Reference) Isat3 (Reference) 1.6 32.7 40.0 60.0 1.9 29.7 31.0 47.0 2.20 2.1 2.4 26.4 29.0 42.0 2.20 ±20% 2.7 3.2 23.1 23.0 34.5 2.20 ±20% 3.3 3.8 21.1 19.5 29.0 2.20 1.50 ±20% 4.6 5.4 17.7 18.0 26.0 2.20 MPX1D1040L2R2 2.20 ±20% 6.8 7.9 14.6 13.0 18.5 2.20 MPX1D1040L3R3 3.30 ±20% 11.1 12.8 11.4 11.0 15.0 2.20 MPX1D1040L4R7 4.70 ±20% 13.8 15.9 10.3 10.0 14.0 2.20 MPX1D1040L6R8 6.80 ±20% 20.9 24.1 8.3 8.0 11.5 2.20 MPX1D1040L100 10.00 ±20% 29.6 34.1 7.0 7.5 10.5 2.20 MPX1D1040L150 15.00 ±20% 44.5 51.2 5.7 5.5 8.5 2.20 MPX1D1040L220 22.00 ±20% 66.2 76.1 4.7 5.0 7.0 2.20 MPX1D1040L330 33.00 ±20% 104.1 119.7 3.7 3.5 5.0 2.20 MPX1D1040L470 47.00 ±20% 158.8 182.6 3.0 3.0 4.0 2.20 MPX1D1235LR15 0.15 ±20% 1.1 1.3 39.9 54.0 85.0 2.90 MPX1D1235LR22 0.22 ±20% 1.3 1.6 35.2 50.0 75.0 2.90 MPX1D1235LR33 0.33 ±20% 1.5 1.8 33.4 40.0 55.0 2.90 MPX1D1235LR47 0.47 ±20% 2.0 2.3 28.9 31.0 45.0 2.90 MPX1D1235LR68 0.68 ±20% 2.5 2.9 25.9 28.0 40.0 2.90 MPX1D1235L1R0 1.00 ±20% 3.6 4.2 21.5 22.0 32.5 2.90 MPX1D1235L1R5 1.50 ±20% 5.2 6.0 17.9 19.0 28.0 2.90 MPX1D1235L2R2 2.20 ±20% 7.3 8.4 15.2 15.5 23.0 2.90 MPX1D1235L3R3 3.30 ±20% 10.6 12.2 12.5 12.0 18.0 2.90 MPX1D1235L4R7 4.70 ±20% 14.2 16.4 10.9 11.5 17.5 2.90 MPX1D1235L6R8 6.80 ±20% 18.8 21.7 9.4 9.5 14.0 2.90 MPX1D1235L100 10.00 ±20% 30.4 35.0 7.4 8.5 12.0 2.90 MPX1D1250LR22 0.22 ±20% 1.0 1.2 42.7 55.0 85.0 4.20 MPX1D1250LR33 0.33 ±20% 1.1 1.3 41.6 45.0 65.0 4.20 MPX1D1250LR47 0.47 ±20% 1.5 1.8 34.8 37.0 55.0 4.20 MPX1D1250LR68 0.68 ±20% 1.7 2.0 32.7 30.0 45.0 4.20 MPX1D1250L1R0 1.00 ±20% 2.2 2.6 28.8 30.5 43.0 4.20 MPX1D1250L1R5 1.50 ±20% 3.1 3.6 24.2 22.0 32.0 4.20 MPX1D1250L2R2 2.20 ±20% 4.1 4.8 21.0 20.0 28.5 4.20 MPX1D1250L3R3 3.30 ±20% 6.4 7.4 16.8 15.0 22.0 4.20 MPX1D1250L4R7 4.70 ±20% 8.8 10.1 14.4 12.0 17.5 4.20 MPX1D1250L6R8 6.80 ±20% 13.4 15.5 11.6 10.0 14.0 4.20 MPX1D1250L100 10.00 ±20% 17.9 20.6 10.1 9.0 13.5 4.20 Irms1 Isat2 Isat3 Inductance (µH) Inductance DC Resistance DC Resistance Part Number at 100 kHz, 1 Tolerance (mΩ) Typical (mΩ) Maximum mA 1 T = 40 K rise at rated current 2 Inductance drop 20% at rated current 3 Inductance drop 30% at rated current All electrical characteristics data is referenced to 25°C © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Rated Current (A) 2.20 Weight (g) L9012_MPX • 11/28/2023 5 SMD Inductors Metal Composite Power Inductors MPX Table 1 – Ratings & Part Number Reference cont.  Part Number Inductance (µH) at 100 kHz, 1 mA Inductance Tolerance DC Resistance (mΩ) Typical DC Resistance (mΩ) Maximum Rated Current (A) Irms1 (Reference) Isat2 (Reference) Isat3 (Reference) Weight (g) MPX1D1250L150 15.00 ±20% 26.8 30.8 8.2 7.5 11.0 4.20 MPX1D1250L220 22.00 ±20% 40.1 46.2 6.7 6.5 9.0 4.20 MPX1D1250L330 33.00 ±20% 62.6 72.0 5.4 5.0 7.5 4.20 MPX1D1250L470 47.00 ±20% 91.6 105.4 4.5 4.0 5.5 4.20 4.20 MPX1D1250L680 68.00 ±20% 141.7 163.0 3.6 3.0 4.5 MPX1D1264LR22 0.22 ±20% 0.8 0.9 53.0 68.0 100.0 5.50 MPX1D1264LR33 0.33 ±20% 1.0 1.2 45.6 48.0 70.0 5.50 MPX1D1264LR47 0.47 ±20% 1.4 1.7 38.2 40.0 58.0 5.50 MPX1D1264LR68 0.68 ±20% 1.7 1.9 35.4 34.0 50.0 5.50 MPX1D1264L1R0 1.00 ±20% 2.0 2.3 32.2 30.0 45.0 5.50 MPX1D1264L1R5 1.50 ±20% 2.5 2.9 28.8 25.0 35.5 5.50 MPX1D1264L2R2 2.20 ±20% 3.2 3.7 25.4 23.0 32.0 5.50 MPX1D1264L3R3 3.30 ±20% 5.3 6.2 19.7 16.5 22.5 5.50 MPX1D1264L4R7 4.70 ±20% 7.1 8.2 17.1 14.0 19.5 5.50 MPX1D1264L6R8 6.80 ±20% 10.6 12.3 14.0 11.5 16.0 5.50 MPX1D1264L100 10.00 ±20% 14.0 16.1 12.2 10.0 14.0 5.50 MPX1D1264L150 15.00 ±20% 21.6 24.9 9.8 8.0 11.5 5.50 MPX1D1264L220 22.00 ±20% 30.5 35.1 8.2 7.0 9.5 5.50 MPX1D1740LR47 0.47 ±20% 1.4 1.6 36.5 39.0 53.5 6.30 MPX1D1740LR68 0.68 ±20% 1.7 2.0 32.5 40.5 55.0 6.30 MPX1D1740L1R0 1.00 ±20% 1.9 2.2 31.0 34.0 47.0 6.30 6.30 MPX1D1740L1R5 1.50 ±20% 2.8 3.2 25.5 23.5 32.0 MPX1D1740L2R2 2.20 ±20% 4.1 4.7 21.0 21.5 28.5 6.30 MPX1D1740L3R3 3.30 ±20% 6.0 6.9 17.5 17.5 23.0 6.30 MPX1D1740L4R7 4.70 ±20% 8.1 9.3 15.0 13.5 18.5 6.30 MPX1D1740L6R8 6.80 ±20% 11.4 13.1 12.5 11.5 15.5 6.30 MPX1D1740L100 10.00 ±20% 15.5 17.8 10.5 8.5 11.5 6.30 MPX1D1740L150 15.00 ±20% 23.3 26.8 8.5 9.0 12.5 6.30 MPX1D1740L220 22.00 ±20% 37.0 42.6 7.0 8.0 10.5 6.30 MPX1D1740L330 33.00 ±20% 58.7 67.5 5.5 6.0 8.0 6.30 MPX1D1740L470 47.00 ±20% 86.3 99.3 4.5 4.0 5.5 6.30 MPX1D1770LR47 0.47 ±20% 0.7 0.8 58.0 60.0 85.0 11.0 MPX1D1770LR68 0.68 ±20% 0.8 0.9 52.0 58.0 81.0 11.0 MPX1D1770L1R0 1.00 ±20% 1.2 1.4 41.0 40.0 55.0 11.0 MPX1D1770L1R5 1.50 ±20% 1.6 1.9 39.0 39.0 50.0 11.0 MPX1D1770L2R2 2.20 ±20% 1.9 2.2 35.0 31.0 42.0 11.0 MPX1D1770L3R3 3.30 ±20% 2.4 2.8 30.0 30.0 39.0 11.0 MPX1D1770L4R7 4.70 ±20% 4.1 4.8 24.0 23.5 35.0 11.0 Isat Isat Inductance (µH) Inductance DC Resistance DC Resistance Part Number at 100 kHz, 1 Tolerance (mΩ) Typical (mΩ) Maximum mA 1 T = 40 K rise at rated current 2 Inductance drop 20% at rated current 3 Inductance drop 30% at rated current All electrical characteristics data is referenced to 25°C © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Irms 1 2 Rated Current (A) 3 Weight (g) L9012_MPX • 11/28/2023 6 SMD Inductors Metal Composite Power Inductors MPX Table 1 – Ratings & Part Number Reference cont. Inductance (µH) at 100 kHz, 1 mA Inductance Tolerance DC Resistance (mΩ) Typical MPX1D1770L6R8 6.80 ±20% 5.8 MPX1D1770L100 10.00 ±20% 8.9 MPX1D1770L150 15.00 ±20% 13.5 MPX1D1770L220 22.00 ±20% MPX1D1770L330 33.00 ±20% MPX1D1770L470 47.00 ±20% MPX1D1770L680 68.00 MPX1D1770L101  Part Number DC Resistance (mΩ) Maximum Rated Current (A) Isat3 (Reference) Weight (g) Irms1 (Reference) Isat2 (Reference) 6.7 20.0 20.0 28.0 10.3 16.0 17.0 22.0 11.0 15.6 13.0 13.0 17.0 11.0 19.5 22.5 11.0 11.0 14.0 11.0 28.8 33.2 9.0 9.0 13.0 11.0 42.7 49.2 7.0 8.0 11.0 11.0 ±20% 60.0 69.0 6.0 6.0 8.5 11.0 100.00 ±20% 80.0 92.0 5.0 5.0 8.0 11.0 MPX1D2213LR47 0.47 ±20% 0.5 0.5 92.0 80.0 124.0 37.0 MPX1D2213LR68 0.68 ±20% 0.5 0.6 88.0 92.0 132.0 37.0 MPX1D2213L1R0 1.00 ±20% 0.6 0.7 80.0 60.0 80.0 37.0 MPX1D2213L1R5 1.50 ±20% 0.8 0.9 70.0 62.0 75.0 37.0 MPX1D2213L2R2 2.20 ±20% 1.0 1.2 65.0 47.0 65.0 37.0 11.0 MPX1D2213L3R3 3.30 ±20% 1.2 1.4 60.0 42.0 60.0 37.0 MPX1D2213L4R7 4.70 ±20% 1.6 1.9 50.0 45.0 58.0 37.0 MPX1D2213L6R8 6.80 ±20% 2.4 2.8 44.0 35.0 50.0 37.0 MPX1D2213L100 10.00 ±20% 3.6 4.2 35.0 30.0 40.0 37.0 MPX1D2213L150 15.00 ±20% 4.3 5.0 32.0 24.0 32.0 37.0 MPX1D2213L220 22.00 ±20% 8.7 10.1 22.0 18.0 25.0 37.0 MPX1D2213L330 33.00 ±20% 9.2 10.6 18.0 16.0 21.0 37.0 37.0 MPX1D2213L470 47.00 ±20% 16.4 18.9 16.0 13.0 17.0 MPX1D2213L680 68.00 ±20% 25.2 29.0 12.0 9.0 13.0 37.0 MPX1D2213L101 100.00 ±20% 30.9 35.6 11.0 8.0 11.0 37.0 Irms1 Isat2 Isat3 Part Number Inductance (µH) at 100 kHz, 1 mA Inductance Tolerance DC Resistance DC Resistance (mΩ) Typical (mΩ) Maximum Rated Current (A) Weight (g) T = 40 K rise at rated current Inductance drop 20% at rated current 3 Inductance drop 30% at rated current All electrical characteristics data is referenced to 25°C 1 2 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9012_MPX • 11/28/2023 7 SMD Inductors Metal Composite Power Inductors MPX DC-Superposed Characteristics MPX1D0520LR22 MPX1D0520LR15 0.20 Inductance [uH] Inductance [uH] 0.25 0.15 0.10 0.05 0.00 0 5 10 15 DC Current [A] 20 0.30 0.25 0.20 0.15 0.10 0.05 0.00 25 0 0.4 Inductance [uH] Inductance [uH] 0.5 0.3 0.2 0.1 0 5 10 15 DC Current [A] 20 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0 MPX1D0520LR68 Inductance [uH] Inductance [uH] 5 10 15 DC Current [A] 20 0.4 0.2 0 5 10 15 DC Current [A] 0.9 0.6 0.3 0.0 20 0 Inductance [uH] 2.0 1.5 1.0 0.5 0 2 4 6 8 DC Current [A] 2 4 6 8 10 DC Current [A] 12 14 MPX1D0520L2R2 MPX1D0520L1R5 Inductance [uH] 25 1.2 0.6 0.0 20 MPX1D0520L1R0 0.8 0.0 10 15 DC Current [A] MPX1D0520LR47 MPX1D0520LR33 0.0 5 10 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 12 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 2 4 6 8 DC Current [A] 10 12 L9012_MPX • 11/28/2023 8 SMD Inductors Metal Composite Power Inductors MPX DC-Superposed Characteristics cont. MPX1D0520L3R3 MPX1D0520L4R7 Inductance [uH] Inductance [uH] 4 3 2 1 0 0 2 4 6 8 DC Current [A] 10 12 6 5 4 3 2 1 0 0 2 MPX1D0520L6R8 Inductance [uH] Inductance [uH] 4 2 0 2 4 DC Current [A] 6 9 6 3 0 8 0 1 MPX1D0530LR15 Inductance [uH] Inductance [uH] 0.20 0.15 0.10 0.05 0.00 0 5 10 15 DC Current [A] 20 25 0.30 0.25 0.20 0.15 0.10 0.05 0.00 0 MPX1D0530LR33 Inductance [uH] 0.4 0.3 0.2 0.1 5 4 5 10 15 DC Current [A] © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 5 10 15 DC Current [A] 20 25 MPX1D0530LR47 0.5 0 2 3 DC Current [A] MPX1D0530LR22 0.25 Inductance [uH] 10 12 6 0.0 8 MPX1D0520L100 8 0 4 6 DC Current [A] 20 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0 5 10 15 DC Current [A] 20 L9012_MPX • 11/28/2023 9 SMD Inductors Metal Composite Power Inductors MPX DC-Superposed Characteristics cont. MPX1D0530LR68 MPX1D0530L1R0 1.2 Inductance [uH] Inductance [uH] 0.8 0.6 0.4 0.2 0.0 0 4 8 12 DC Current [A] 0.9 0.6 0.3 0.0 16 0 MPX1D0530L1R5 Inductance [uH] Inductance [uH] 1.5 1.0 0.5 0 2 4 6 8 DC Current [A] 10 12 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 MPX1D0530L3R3 Inductance [uH] Inductance [uH] 3 2 1 0 1 2 3 4 DC Current [A] 5 6 6 5 4 3 2 1 0 0 12 14 4 6 DC Current [A] 8 10 2 3 DC Current [A] 4 5 4 5 MPX1D0530L100 12 Inductance [uH] 8 Inductance [uH] 2 1 MPX1D0530L6R8 6 4 2 0 6 8 10 DC Current [A] MPX1D0530L4R7 4 0 4 MPX1D0530L2R2 2.0 0.0 2 0 1 2 3 DC Current [A] 4 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 5 9 6 3 0 0 1 2 3 DC Current [A] L9012_MPX • 11/28/2023 10 SMD Inductors Metal Composite Power Inductors MPX DC-Superposed Characteristics cont. MPX1D0530L220 20 25 15 20 Inductance [uH] Inductance [uH] MPX1D0530L150 10 5 0 0.0 0.5 1.0 1.5 2.0 DC Current [A] 2.5 15 10 5 0 3.0 0.0 0.25 0.09 0.20 Inductance [uH] Inductance [uH] 0.12 0.06 0.03 0 10 20 30 DC Current [A] 0.05 0.00 40 0 0.4 Inductance [uH] Inductance [uH] 0.5 0.18 0.12 0.06 20 30 DC Current [A] 40 0.2 0.1 0.0 40 0 5 10 15 20 DC Current [A] 25 30 MPX1D0618LR68 0.8 Inductance [uH] Inductance [uH] 20 30 DC Current [A] 0.3 MPX1D0618LR47 0.6 0.5 0.4 0.3 0.2 0.1 0.0 10 MPX1D0618LR33 0.24 10 2.5 0.10 0.30 0 2.0 0.15 MPX1D0618LR22 0.00 1.0 1.5 DC Current [A] MPX1D0618LR15 MPX1D0618LR10 0.00 0.5 0 5 10 15 DC Current [A] 20 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 25 0.6 0.4 0.2 0.0 0 5 10 15 DC Current [A] 20 L9012_MPX • 11/28/2023 11 SMD Inductors Metal Composite Power Inductors MPX DC-Superposed Characteristics cont. MPX1D0618L1R0 MPX1D0618L1R5 2.0 Inductance [uH] Inductance [uH] 1.2 0.9 0.6 0.3 0.0 0 5 10 15 DC Current [A] 1.5 1.0 0.5 0.0 20 0 3 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 2 4 6 8 DC Current [A] 10 10 40 50 3 2 1 0 12 0 2 4 6 DC Current [A] MPX1D0624LR10 0.15 Inductance [uH] Inductance [uH] 8 4 0 2 4 DC Current [A] 6 0.12 0.09 0.06 0.03 0.00 8 0 MPX1D0624LR15 0.25 0.30 0.20 0.24 0.15 0.10 0.05 0.00 0 10 20 30 DC Current [A] © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 10 20 30 DC Current [A] MPX1D0624LR22 Inductance [uH] Inductance [uH] 15 5 MPX1D0618L4R7 6 5 4 3 2 1 0 12 MPX1D0618L3R3 Inductance [uH] Inductance [uH] MPX1D0618L2R2 6 9 DC Current [A] 40 0.18 0.12 0.06 0.00 0 5 10 15 20 25 DC Current [A] 30 35 L9012_MPX • 11/28/2023 12 SMD Inductors Metal Composite Power Inductors MPX DC-Superposed Characteristics cont. MPX1D0624LR47 0.6 0.4 0.5 Inductance [uH] Inductance [uH] MPX1D0624LR33 0.5 0.3 0.2 0.1 0.0 0 5 10 15 20 DC Current [A] 25 0.4 0.3 0.2 0.1 0.0 30 0 5 Inductance [uH] Inductance [uH] 0.8 0.6 0.4 0.2 0.0 0 5 10 15 DC Current [A] 20 0.9 0.6 0.3 0.0 25 0 5 MPX1D0624L1R5 Inductance [uH] 1.5 1.0 0.5 0.0 0 5 10 15 DC Current [A] 20 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 MPX1D0624L3R3 Inductance [uH] 4 3 2 1 2 4 6 8 10 DC Current [A] 20 2 4 6 8 10 12 DC Current [A] 14 16 MPX1D0624L4R7 5 0 10 15 DC Current [A] MPX1D0624L2R2 2.0 Inductance [uH] 30 1.2 1.0 Inductance [uH] 25 MPX1D0624L1R0 MPX1D0624LR68 0 10 15 20 DC Current [A] 12 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 14 6 5 4 3 2 1 0 0 2 4 6 8 DC Current [A] 10 12 L9012_MPX • 11/28/2023 13 SMD Inductors Metal Composite Power Inductors MPX DC-Superposed Characteristics cont. MPX1D0624L6R8 MPX1D0624L100 Inductance [uH] Inductance [uH] 8 6 4 2 0 0 2 4 6 DC Current [A] 8 10 12 10 8 6 4 2 0 0 2 MPX1D0630LR10 0.12 Inductance [uH] Inductance [uH] 0.20 0.09 0.06 0.03 0.00 0 10 20 30 DC Current [A] 40 0.15 0.10 0.05 0.00 50 0 0.5 0.24 0.4 0.18 0.12 0.06 0.00 0 10 10 20 30 DC Current [A] 40 MPX1D0630LR33 0.30 Inductance [uH] Inductance [uH] MPX1D0630LR22 20 30 DC Current [A] 0.3 0.2 0.1 0.0 40 0 MPX1D0630LR47 5 10 15 20 25 DC Current [A] 30 35 MPX1D0630LR68 0.8 Inductance [uH] Inductance [uH] 8 MPX1D0630LR15 0.15 0.6 0.5 0.4 0.3 0.2 0.1 0.0 4 6 DC Current [A] 0 5 10 15 20 25 DC Current [A] 30 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 35 0.6 0.4 0.2 0.0 0 5 10 15 20 DC Current [A] 25 30 L9012_MPX • 11/28/2023 14 SMD Inductors Metal Composite Power Inductors MPX DC-Superposed Characteristics cont. MPX1D0630L1R0 MPX1D0630L1R5 2.0 1.2 Inductance [uH] Inductance [uH] 1.5 0.9 0.6 0.3 0.0 0 5 10 15 DC Current [A] 1.5 1.0 0.5 0.0 20 0 5 5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 2 4 6 8 10 12 DC Current [A] 14 4 3 2 1 0 16 0 2 0 2 4 6 8 DC Current [A] 10 12 14 6 4 2 0 12 0 2 4 6 DC Current [A] 8 10 MPX1D0630L150 20 Inductance [uH] Inductance [uH] 6 8 10 DC Current [A] MPX1D0630L6R8 MPX1D0630L100 12 10 8 6 4 2 0 4 8 Inductance [uH] Inductance [uH] MPX1D0630L4R7 6 5 4 3 2 1 0 20 MPX1D0630L3R3 Inductance [uH] Inductance [uH] MPX1D0630L2R2 10 15 DC Current [A] 0 2 4 DC Current [A] 6 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 8 15 10 5 0 0 1 2 3 4 DC Current [A] 5 6 L9012_MPX • 11/28/2023 15 SMD Inductors Metal Composite Power Inductors MPX DC-Superposed Characteristics cont. MPX1D0630L220 MPX1D0650LR68 0.8 20 Inductance [uH] Inductance [uH] 25 15 10 5 0 0 1 2 3 DC Current [A] 4 0.6 0.4 0.2 0.0 5 0 MPX1D0650L1R0 Inductance [uH] Inductance [uH] 1.2 0.9 0.6 0.3 0 5 10 15 DC Current [A] 20 30 1.5 1.0 0.5 0.0 25 0 MPX1D0650L2R2 Inductance [uH] 2.0 1.5 1.0 0.5 0.0 0 5 5 10 15 DC Current [A] 20 MPX1D0650L3R3 2.5 Inductance [uH] 25 2.0 0.0 10 15 DC Current [A] 20 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 MPX1D0650L4R7 4 8 12 DC Current [A] 16 MPX1D0650L6R8 8 Inductance [uH] Inductance [uH] 10 15 20 DC Current [A] MPX1D0650L1R5 1.5 6 5 4 3 2 1 0 5 0 3 6 9 DC Current [A] 12 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 15 6 4 2 0 0 2 4 6 DC Current [A] 8 10 L9012_MPX • 11/28/2023 16 SMD Inductors Metal Composite Power Inductors MPX DC-Superposed Characteristics cont. 12 10 8 6 4 2 0 MPX1D0830LR22 0.30 Inductance [uH] Inductance [uH] MPX1D0650L100 0.20 0.10 0.00 0 2 4 DC Current [A] 6 0 8 MPX1D0830LR33 Inductance [uH] Inductance [uH] 0.3 0.2 0.1 0 10 20 30 DC Current [A] 0.2 0 Inductance [uH] Inductance [uH] 0.8 0.6 0.4 0.2 0 5 10 15 20 DC Current [A] 25 30 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 MPX1D0830L1R5 Inductance [uH] 1.5 1.0 0.5 5 10 15 DC Current [A] 20 30 DC Current [A] 40 5 10 15 20 DC Current [A] 25 30 MPX1D0830L2R2 2.0 0 10 MPX1D0830L1R0 MPX1D0830LR68 Inductance [uH] 50 0.4 0.0 40 1.0 0.0 40 0.6 0.4 0.0 20 30 DC Current [A] MPX1D0830LR47 0.5 0.0 10 20 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 25 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 5 10 15 DC Current [A] 20 25 L9012_MPX • 11/28/2023 17 SMD Inductors Metal Composite Power Inductors MPX DC-Superposed Characteristics cont. MPX1D0830L3R3 MPX1D0830L4R7 4 Inductance [uH] Inductance [uH] 5 3 2 1 0 0 5 10 15 DC Current [A] 20 6 5 4 3 2 1 0 0 3 MPX1D0830L6R8 Inductance [uH] Inductance [uH] 6 4 2 0 2 4 6 DC Current [A] 8 10 12 10 8 6 4 2 0 0 2 15 20 Inductance [uH] Inductance [uH] 25 10 5 0 1 2 3 4 DC Current [A] 5 6 8 10 5 0 6 0 1 2 3 DC Current [A] 4 5 MPX1D0840LR22 0.30 Inductance [uH] 40 Inductance [uH] 4 DC Current [A] 15 MPX1D0830L330 30 20 10 0 15 MPX1D0830L220 MPX1D0830L150 20 0 12 MPX1D0830L100 8 0 6 9 DC Current [A] 0 1 2 DC Current [A] 3 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 4 0.24 0.18 0.12 0.06 0.00 0 10 20 30 40 DC Current [A] 50 60 L9012_MPX • 11/28/2023 18 SMD Inductors Metal Composite Power Inductors MPX DC-Superposed Characteristics cont. MPX1D0840LR47 0.6 0.4 0.5 Inductance [uH] Inductance [uH] MPX1D0840LR33 0.5 0.3 0.2 0.1 0.0 0 10 20 30 40 DC Current [A] 50 0.4 0.3 0.2 0.1 0.0 60 0 10 0.8 1.2 Inductance [uH] Inductance [uH] 1.5 0.6 0.4 0.2 0 5 10 15 20 25 DC Current [A] 30 0.9 0.6 0.3 0.0 35 0 5 2.5 2.5 2.0 2.0 1.5 1.0 0.5 0 5 10 15 DC Current [A] 20 0.5 0.0 25 0 5 5 Inductance [uH] Inductance [uH] 4 3 2 1 10 15 DC Current [A] © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 10 15 DC Current [A] 20 MPX1D0840L4R7 6 5 30 1.0 5 0 25 1.5 MPX1D0840L3R3 0 10 15 20 DC Current [A] MPX1D0840L2R2 Inductance [uH] Inductance [uH] MPX1D0840L1R5 0.0 40 MPX1D0840L1R0 MPX1D0840LR68 1.0 0.0 20 30 DC Current [A] 20 4 3 2 1 0 0 2 4 6 8 10 12 14 16 18 DC Current [A] L9012_MPX • 11/28/2023 19 SMD Inductors Metal Composite Power Inductors MPX DC-Superposed Characteristics cont. MPX1D0840L6R8 MPX1D0840L100 12 Inductance [uH] Inductance [uH] 8 6 4 2 0 0 2 4 6 8 10 12 DC Current [A] 14 10 8 6 4 2 0 16 0 15 20 Inductance [uH] Inductance [uH] 25 12 9 6 3 0 2 4 6 8 DC Current [A] 10 0 2 4 6 DC Current [A] 8 10 MPX1D0840L470 60 Inductance [uH] Inductance [uH] 14 5 0 2 4 DC Current [A] 6 50 40 30 20 10 0 8 0 MPX1D1040LR22 1 2 3 4 DC Current [A] 5 6 50 60 MPX1D1040LR33 0.4 0.25 Inductance [uH] Inductance [uH] 12 10 0 12 0.30 0.20 0.15 0.10 0.05 0.00 6 8 10 DC Current [A] 15 MPX1D0840L330 40 35 30 25 20 15 10 5 0 4 MPX1D0840L220 MPX1D0840L150 18 0 2 0 20 40 60 DC Current [A] © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 80 0.3 0.2 0.1 0.0 0 10 20 30 40 DC Current [A] L9012_MPX • 11/28/2023 20 SMD Inductors Metal Composite Power Inductors MPX DC-Superposed Characteristics cont. MPX1D1040LR68 1.0 0.5 0.8 Inductance [uH] Inductance [uH] MPX1D1040LR47 0.6 0.4 0.3 0.2 0.1 0.0 0 10 20 30 DC Current [A] 40 0.6 0.4 0.2 0.0 50 0 0.8 0.6 0.4 0.2 0 5 10 15 20 25 DC Current [A] 30 1.5 1.0 0.5 0.0 35 2.0 4 1.5 1.0 0.5 0 5 10 15 DC Current [A] 20 5 10 15 20 DC Current [A] 25 30 3 2 1 0 25 0 MPX1D1040L4R7 5 10 DC Current [A] 15 20 MPX1D1040L6R8 6 8 5 Inductance [uH] Inductance [uH] 0 MPX1D1040L3R3 5 Inductance [uH] Inductance [uH] MPX1D1040L2R2 2.5 4 3 2 1 0 40 2.0 Inductance [uH] Inductance [uH] 1.2 1.0 0.0 20 30 DC Current [A] MPX1D1040L1R5 MPX1D1040L1R0 0.0 10 0 5 10 DC Current [A] 15 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 20 6 4 2 0 0 3 6 9 DC Current [A] 12 15 L9012_MPX • 11/28/2023 21 SMD Inductors Metal Composite Power Inductors MPX DC-Superposed Characteristics cont. MPX1D1040L150 12 10 8 6 4 2 0 20 Inductance [uH] Inductance [uH] MPX1D1040L100 15 10 5 0 0 3 6 9 DC Current [A] 12 15 0 2 MPX1D1040L220 Inductance [uH] Inductance [uH] 15 10 5 0 2 4 6 DC Current [A] 8 30 20 10 0 10 0 2 8 10 80 100 0.25 Inductance [uH] Inductance [uH] 4 6 DC Current [A] MPX1D1235LR15 MPX1D1040L470 0 1 2 3 4 DC Current [A] 5 0.20 0.15 0.10 0.05 0.00 6 0 0.5 0.25 0.4 Inductance [uH] 0.30 0.20 0.15 0.10 0.05 0.00 0 20 40 60 DC Current [A] 20 40 60 DC Current [A] MPX1D1235LR33 MPX1D1235LR22 Inductance [uH] 12 40 20 60 50 40 30 20 10 0 10 MPX1D1040L330 25 0 4 6 8 DC Current [A] 80 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 100 0.3 0.2 0.1 0.0 0 10 20 30 40 DC Current [A] 50 60 L9012_MPX • 11/28/2023 22 SMD Inductors Metal Composite Power Inductors MPX DC-Superposed Characteristics cont. MPX1D1235LR68 1.0 0.5 0.8 Inductance [uH] Inductance [uH] MPX1D1235LR47 0.6 0.4 0.3 0.2 0.1 0.0 0 10 20 30 DC Current [A] 40 0.6 0.4 0.2 0.0 50 0 MPX1D1235L1R0 Inductance [uH] Inductance [uH] 0.8 0.6 0.4 0.2 0 10 20 30 DC Current [A] 1.0 0.5 0.0 40 2.0 4 1.5 1.0 0.5 0 5 0 5 10 15 20 DC Current [A] 25 30 MPX1D1235L3R3 5 Inductance [uH] Inductance [uH] MPX1D1235L2R2 10 15 20 DC Current [A] 25 3 2 1 0 30 0 5 10 15 DC Current [A] 20 25 MPX1D1235L6R8 MPX1D1235L4R7 8 6 5 Inductance [uH] Inductance [uH] 50 1.5 2.5 4 3 2 1 0 40 2.0 1.0 0.0 20 30 DC Current [A] MPX1D1235L1R5 1.2 0.0 10 0 5 10 DC Current [A] 15 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 20 6 4 2 0 0 5 10 DC Current [A] 15 20 L9012_MPX • 11/28/2023 23 SMD Inductors Metal Composite Power Inductors MPX DC-Superposed Characteristics cont. MPX1D1250LR22 12 0.25 10 0.20 Inductance [uH] Inductance [uH] MPX1D1235L100 8 6 4 2 0 0 2 4 6 8 10 DC Current [A] 12 0.15 0.10 0.05 0.00 14 0 MPX1D1250LR33 Inductance [uH] Inductance [uH] 0.4 0.3 0.2 0.1 0 20 40 60 DC Current [A] 0.3 0.2 0.1 0 40 60 DC Current [A] 80 MPX1D1250L1R0 Inductance [uH] Inductance [uH] 20 1.2 0.6 0.4 0.2 0 20 40 60 DC Current [A] 1.0 0.8 0.6 0.4 0.2 0.0 80 0 MPX1D1250L1R5 2.5 1.5 2.0 1.0 0.5 0 5 10 15 20 25 30 DC Current [A] 10 20 30 DC Current [A] 40 50 MPX1D1250L2R2 2.0 Inductance [uH] Inductance [uH] 100 0.4 MPX1D1250LR68 0.0 80 0.6 0.5 0.0 80 0.8 0.0 40 60 DC Current [A] MPX1D1250LR47 0.5 0.0 20 35 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 40 1.5 1.0 0.5 0.0 0 5 10 15 20 25 DC Current [A] 30 35 L9012_MPX • 11/28/2023 24 SMD Inductors Metal Composite Power Inductors MPX DC-Superposed Characteristics cont. MPX1D1250L3R3 MPX1D1250L4R7 4 Inductance [uH] Inductance [uH] 5 3 2 1 0 0 5 10 15 20 DC Current [A] 25 30 6 5 4 3 2 1 0 0 5 Inductance [uH] Inductance [uH] 25 12 8 6 4 2 0 0 5 10 DC Current [A] 15 10 8 6 4 2 0 20 0 5 25 15 20 Inductance [uH] 20 10 5 0 0 3 6 9 DC Current [A] 12 20 15 10 5 0 15 0 MPX1D1250L330 2 4 6 8 DC Current [A] 10 12 MPX1D1250L470 40 Inductance [uH] 60 30 20 10 0 10 15 DC Current [A] MPX1D1250L220 MPX1D1250L150 Inductance [uH] 20 MPX1D1250L100 MPX1D1250L6R8 Inductance [uH] 10 15 DC Current [A] 0 2 4 6 DC Current [A] 8 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 10 50 40 30 20 10 0 0 2 4 6 DC Current [A] 8 10 L9012_MPX • 11/28/2023 25 SMD Inductors Metal Composite Power Inductors MPX DC-Superposed Characteristics cont. MPX1D1264LR22 80 0.25 60 0.20 Inductance [uH] Inductance [uH] MPX1D1250L680 40 20 0 0 2 4 6 DC Current [A] 8 0.15 0.10 0.05 0.00 10 0 0.5 0.6 0.4 0.5 0.3 0.2 0.1 0.0 0 20 40 60 DC Current [A] 80 0.2 0.1 0 20 80 MPX1D1264L1R0 0.8 Inductance [uH] Inductance [uH] 40 60 DC Current [A] 1.2 0.6 0.4 0.2 0 20 40 60 DC Current [A] 0.9 0.6 0.3 0.0 80 0 MPX1D1264L1R5 2.0 2.5 1.5 2.0 Inductance [uH] Inductance [uH] 120 0.3 MPX1D1264LR68 1.0 0.5 0.0 100 0.4 0.0 100 1.0 0.0 40 60 80 DC Current [A] MPX1D1264LR47 Inductance [uH] Inductance [uH] MPX1D1264LR33 20 0 5 10 15 20 25 30 DC Current [A] 35 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 40 10 20 30 40 DC Current [A] 50 60 MPX1D1264L2R2 1.5 1.0 0.5 0.0 0 5 10 15 20 25 30 DC Current [A] 35 40 L9012_MPX • 11/28/2023 26 SMD Inductors Metal Composite Power Inductors MPX DC-Superposed Characteristics cont. MPX1D1264L4R7 6 4 5 Inductance [uH] Inductance [uH] MPX1D1264L3R3 5 3 2 1 0 0 5 10 15 20 DC Current [A] 25 4 3 2 1 0 30 0 5 MPX1D1264L6R8 Inductance [uH] Inductance [uH] 6 4 2 0 5 10 DC Current [A] 15 20 12 10 8 6 4 2 0 0 Inductance [uH] Inductance [uH] 10 15 DC Current [A] 20 0 3 6 9 DC Current [A] 12 20 15 10 5 0 15 0 MPX1D1740LR47 3 6 9 DC Current [A] 12 15 MPX1D1740LR68 0.8 0.5 Inductance [uH] Inductance [uH] 5 25 0.6 0.4 0.3 0.2 0.1 0.0 25 MPX1D1264L220 MPX1D1264L150 18 15 12 9 6 3 0 20 MPX1D1264L100 8 0 10 15 DC Current [A] 0 20 40 DC Current [A] 60 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 80 0.6 0.4 0.2 0.0 0 20 40 DC Current [A] 60 80 L9012_MPX • 11/28/2023 27 SMD Inductors Metal Composite Power Inductors MPX DC-Superposed Characteristics cont. MPX1D1740L1R0 MPX1D1740L1R5 2.0 1.2 Inductance [uH] Inductance [uH] 1.5 0.9 0.6 0.3 0.0 0 20 1.5 1.0 0.5 0 10 30 Inductance [uH] 4 3 2 1 5 10 15 20 DC Current [A] 25 MPX1D1740L100 12 Inductance [uH] 8 6 4 2 0 0 2 4 6 8 10 DC Current [A] 12 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 14 40 2 1 0 5 10 15 20 DC Current [A] 25 30 MPX1D1740L6R8 8 6 4 2 0 5 10 DC Current [A] 15 20 MPX1D1740L150 18 10 30 3 0 30 20 DC Current [A] MPX1D1740L3R3 10 5 0 10 4 0 40 MPX1D1740L4R7 6 Inductance [uH] 20 DC Current [A] 0 5 2.0 0 0.0 80 2.5 0.0 0.5 Inductance [uH] Inductance [uH] 60 1.0 MPX1D1740L2R2 3.0 Inductance [uH] 40 DC Current [A] 1.5 15 12 9 6 3 0 0 2 4 6 8 10 DC Current [A] 12 14 L9012_MPX • 11/28/2023 28 SMD Inductors Metal Composite Power Inductors MPX DC-Superposed Characteristics cont. MPX1D1740L220 20 15 10 5 0 0 30 20 10 0 2 4 DC Current [A] 6 0 Inductance [uH] 0.4 0.2 0 20 40 60 DC Current [A] 80 0.2 0.1 0 Inductance [uH] 1.0 0.5 0 10 20 30 40 DC Current [A] 50 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 60 20 40 60 DC Current [A] 80 100 MPX1D1770L1R0 1.2 0.9 0.6 0.3 0 10 20 30 40 DC Current [A] 50 60 MPX1D1770L2R2 3.0 1.5 8 0.3 MPX1D1770L1R5 2.0 6 0.4 0.0 100 4 DC Current [A] MPX1D1770LR47 1.5 0.6 2 0.5 0.0 8 MPX1D1770LR68 0.8 0.0 10 0.6 40 0.0 20 0 12 Inductance [uH] Inductance [uH] 10 50 0 Inductance [uH] 4 6 8 DC Current [A] 30 MPX1D1740L470 60 Inductance [uH] 2 MPX1D1740L330 40 Inductance [uH] Inductance [uH] 25 2.5 2.0 1.5 1.0 0.5 0.0 0 10 20 30 DC Current [A] 40 50 L9012_MPX • 11/28/2023 29 SMD Inductors Metal Composite Power Inductors MPX DC-Superposed Characteristics cont. MPX1D1770L3R3 4 3 2 1 0 0 10 Inductance [uH] Inductance [uH] 2 5 10 15 20 DC Current [A] 25 Inductance [uH] 10 5 0 5 10 DC Current [A] 15 Inductance [uH] 20 10 0 3 6 9 DC Current [A] 0 12 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 15 10 20 DC Current [A] 30 40 MPX1D1770L100 10 8 6 4 2 0 5 10 15 DC Current [A] 20 25 MPX1D1770L220 25 20 15 10 5 0 5 10 DC Current [A] 15 20 MPX1D1770L470 60 30 0 1 0 20 MPX1D1770L330 40 2 30 15 0 3 0 30 MPX1D1770L150 20 4 12 4 0 5 0 40 6 0 Inductance [uH] 30 MPX1D1770L6R8 8 Inductance [uH] 20 DC Current [A] MPX1D1770L4R7 6 Inductance [uH] Inductance [uH] 5 50 40 30 20 10 0 0 2 4 6 DC Current [A] 8 10 L9012_MPX • 11/28/2023 30 SMD Inductors Metal Composite Power Inductors MPX DC-Superposed Characteristics cont. MPX1D1770L680 60 40 20 0 0 2 0.1 40 60 80 100 DC Current [A] 120 MPX1D2213L1R0 Inductance [uH] 0.6 0.3 20 40 60 DC Current [A] 80 100 1.0 0.5 40 DC Current [A] 60 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 80 4 6 DC Current [A] 8 10 0.6 0.4 0.2 0 20 40 60 80 100 DC Current [A] 120 140 MPX1D2213L1R5 1.5 1.0 0.5 0.0 Inductance [uH] 1.5 20 2 MPX1D2213LR68 0 20 40 DC Current [A] 60 80 60 80 MPX1D2213L3R3 5 2.0 0 0 0.8 MPX1D2213L2R2 2.5 0.0 20 2.0 0.9 0 40 0.0 140 1.2 0.0 60 0 Inductance [uH] Inductance [uH] 0.2 20 80 1.0 0.3 0 100 10 0.4 1.5 Inductance [uH] 8 0.5 0.0 Inductance [uH] 4 6 DC Current [A] MPX1D2213LR47 0.6 MPX1D1770L101 120 Inductance [uH] Inductance [uH] 80 4 3 2 1 0 0 20 40 DC Current [A] L9012_MPX • 11/28/2023 31 SMD Inductors Metal Composite Power Inductors MPX DC-Superposed Characteristics cont. MPX1D2213L4R7 5 4 3 2 1 0 0 20 Inductance [uH] Inductance [uH] 6 4 2 10 20 DC Current [A] 30 Inductance [uH] 20 15 10 5 0 5 10 15 20 DC Current [A] 25 Inductance [uH] 40 30 20 10 0 5 10 15 DC Current [A] 20 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 25 20 30 40 DC Current [A] 50 60 MPX1D2213L150 12 9 6 3 0 10 20 DC Current [A] 30 40 MPX1D2213L330 30 20 10 0 5 10 15 20 DC Current [A] 25 30 MPX1D2213L680 80 50 0 10 15 0 30 MPX1D2213L470 60 0 40 25 0 2 0 40 MPX1D2213L220 30 4 18 8 0 6 0 80 10 0 Inductance [uH] 60 MPX1D2213L100 12 Inductance [uH] 40 DC Current [A] MPX1D2213L6R8 8 Inductance [uH] Inductance [uH] 6 60 40 20 0 0 5 10 DC Current [A] 15 20 L9012_MPX • 11/28/2023 32 SMD Inductors Metal Composite Power Inductors MPX DC-Superposed Characteristics cont. MPX1D2213L101 Inductance [uH] 120 90 60 30 0 0 5 10 DC Current [A] 15 20 Dimensions Case Size Dimensions (mm) Land Pattern (mm) 6.756 (1.0) (1.0) 2.790 5.0 ± 0.2 MPX1D0520 2.0 Maximum 2.5 ± 0.2 5.3 ± 0.2 2.946 6.756 (1.0) 2.790 (1.0) 2.5 ± 0.2 MPX1D0530 3.0 Maximum 5.0 ± 0.2 5.3 ± 0.2 2.946 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9012_MPX • 11/28/2023 33 SMD Inductors Metal Composite Power Inductors MPX Dimensions cont. Case Size Dimensions (mm) Land Pattern (mm) 8.255 (1.3) 3.429 6.5 ± 0.2 MPX1D0618 (1.3) 3.2 ± 0.3 1.8 Maximum 7.0 ± 0.25 3.429 8.255 (1.3) 3.429 6.5 ± 0.2 MPX1D0624 (1.3) 3.2 ± 0.3 2.4 Maximum 7.0 ± 0.25 3.429 8.255 3.429 (1.3) 3.2 ± 0.3 6.5 ± 0.2 MPX1D0630 (1.3) 3.0 Maximum 7.0 ± 0.25 3.429 8.255 3.2 ± 0.3 6.5 ± 0.2 MPX1D0650 (1.3) (1.3) 3.429 5.0 Maximum 7.0 ± 0.25 3.429 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9012_MPX • 11/28/2023 34 SMD Inductors Metal Composite Power Inductors MPX Dimensions cont. Case Size Dimensions (mm) Land Pattern (mm) 9.652 (1.3) 5.334 8.0 ± 0.2 MPX1D0830 (1.3) 5.1 ± 0.3 3.0 Maximum 8.65 ± 0.25 4.826 9.652 (1.3) 5.1 ± 0.3 8.0 ± 0.2 MPX1D0840 (1.3) 5.334 4.0 Maximum 8.65 ± 0.25 4.826 12.192 (2.0) (2.0) 4.7 ± 0.3 10.0 ± 0.2 MPX1D1040 For values up to 1.5 μH or below 4.0 Maximum 4.953 10.8 ± 0.30 5.842 12.065 (2.0) 3.251 (2.0) 3.0 ± 0.3 MPX1D1040 For values from 2.2 μH or above 4.0 Maximum 10.0 ± 0.2 10.8 ± 0.3 5.817 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9012_MPX • 11/28/2023 35 SMD Inductors Metal Composite Power Inductors MPX Dimensions cont. Dimensions (mm) 13.2 ± 0.40 (2.2) 14.732 (2.2) 4.7 ± 0.3 12.5 ± 0.2 MPX1D1235 For values up to 0.47 μH or below 3.5 Maximum Land Pattern (mm) 4.953 Case Size 8.255 (2.2) 14.605 (2.2) 3.0 ± 0.3 12.5 ± 0.2 MPX1D1235 For values from 0.68 μH or above 3.5 Maximum 3.251 13.2 ± 0.40 8.255 14.732 (2.2) (2.2) 4.7 ± 0.3 12.5 ± 0.2 MPX1D1250 5.0 Maximum 4.953 13.2 ± 0.40 8.280 14.732 (2.2) 4.953 (2.2) 4.7 ± 0.3 MPX1D1264 6.4 Maximum 12.5 ± 0.2 13.2 ± 0.40 8.280 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9012_MPX • 11/28/2023 36 SMD Inductors Metal Composite Power Inductors MPX Dimensions cont. Case Size Dimensions (mm) Land Pattern (mm) 20.1 (2.1) 12.35 17.1 ± 0.5 MPX1D1740 (2.1) (11.9) 4.0 Maximum 17.0 ± 0.5 12.4 20.1 (2.1) (11.9) 17.1 ± 0.5 MPX1D1770 (2.1) 12.35 7.0 Maximum 17.0 ± 0.5 12.4 24.26 (5.0) 18.8 (5.0) (18.5) MPX1D2213 13.0 Maximum 22.0 ± 0.5 22.0 ± 0.5 11.5 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9012_MPX • 11/28/2023 37 SMD Inductors Metal Composite Power Inductors MPX Construction Metal composite Copper coil Taping Specification Dimensions of Indented Square Hole Plastic Tape P0 øD0 P2 E1 W F T P1 Case Size Reel Quantity MPX1D0520 3,500 MPX1D0530 2,500 MPX1D0618 A02,500 C D A B Dimensions 05XX Metal terminal Enlarged MPX1D0624 1,500   Dimensions (mm) W F E Nominal 12.00 5.50 ±0.10 1.75 ±0.10 8.00 ±0.10 2.00 ±0.10 4.00 ±0.10 1.50 ±0.05 0.40 Tolerance Nominal ±0.30 12.00 ±0.10 5.50 ±0.10 1.75 ±0.10 8.00 ±0.10 2.00 ±0.10 4.00 ±0.10 1.50 ±0.05 0.40 Tolerance Nominal ±0.30 16.00 ±0.10 7.50 ±0.10 A0 1.75C ±0.10 12.00 ±0.10 2.00 ±0.10 4.00 ±0.10 1.50 ±0.05 0.40 Tolerance W2Nominal ±0.30 16.00 ±0.10 7.50 ±0.10 1.75 ±0.10 12.00 ±0.10 2.00 ±0.10 4.00 ±0.10 1.55 ±0.05 0.40 ±0.30 16.00 ±0.10 7.50 ±0.10 1.75 ±0.10 12.00 ±0.10 2.00 ±0.10 4.00 ±0.10 1.55 ±0.05 0.40 MPX1D06XX, MPX1D08XX, MPX1D10XX, MPX1D12XX, MPX1D17XX, Tolerance ±0.30MPX1D22XX ±0.10 W1 Enlarged D P1 P2 P0 øD0 T MPX1D0630 1,500 Tolerance Nominal MPX1D0650 1,000 Tolerance Nominal ±0.30 16.00 ±0.10 7.50 ±0.10 1.75 ±0.10 12.00 ±0.10 2.00 ±0.10 4.00 ±0.05 1.55 ±0.05 0.40 MPX1D0830 1,500 Tolerance Nominal ±0.30 16.00 ±0.10 7.50 ±0.10 1.75 ±0.10 12.00 ±0.10 2.00 ±0.10 4.00 ±0.05 1.55 ±0.05 0.40 MPX1D0840 1,000 Tolerance Nominal ±0.30 16.00 ±0.10 7.50 ±0.10 1.75 ±0.10 12.00 ±0.10 2.00 ±0.10 4.00 ±0.05 1.50 ±0.05 0.40 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9012_MPX • 11/28/2023 38 SMD Inductors Metal Composite Power Inductors MPX Taping Specification cont. Dimensions of Indented Square Hole Plastic Tape øD0 E1 W F P2 P1 Case Size Reel Quantity MPX1D1040 500 MPX1D1235 500 A B Dimensions 05XX P0 T MPX1D1250 Enlarged MPX1D1264 A0 C 250 D 250   Dimensions (mm) W F E Nominal 24.0 11.5 ±0.1 1.75 ±0.1 16.0 ±0.1 2.0 ±0.1 4.0 ±0.05 1.55 ±0.05 0.4 Tolerance Nominal ±0.3 24.0 ±0.1 11.5 ±0.1 1.75 ±0.1 24.0 ±0.1 2.0 ±0.1 4.0 ±0.05 1.55 ±0.05 0.4 Tolerance Nominal ±0.3 24.0 ±0.1 11.5 ±0.1 24.0 ±0.1 2.0 ±0.1 4.0 ±0.05 1.55 ±0.05 0.4 Tolerance W2Nominal ±0.3 24.0 Enlarged ±0.1A 0 1.75C ±0.1 11.5 ±0.1 1.75 ±0.1 24.0 ±0.1 2.0 ±0.1 4.0 ±0.05 1.55 ±0.05 0.4 ±0.3 32.0 ±0.1 14.2 ±0.1 1.75 ±0.1 24.0 ±0.1 2.0 ±0.1 4.0 ±0.1 1.50 ±0.05 0.5 MPX1D06XX, MPX1D08XX, MPX1D10XX, MPX1D12XX, MPX1D17XX, Tolerance ±0.3MPX1D22XX±0.1 W1 D P1 P2 P0 øD0 T MPX1D1740 100 Tolerance Nominal MPX1D1770 100 Tolerance Nominal ±0.3 32.0 ±0.1 14.2 ±0.1 1.75 ±0.1 24.0 ±0.1 2.0 ±0.1 4.0 ±0.1 1.50 ±0.05 0.5 MPX1D2213 50 Tolerance Nominal ±0.3 44.0 ±0.1 20.2 ±0.1 1.75 ±0.1 32.0 ±0.1 2.0 ±0.1 4.0 ±0.1 1.50 ±0.05 0.5 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9012_MPX • 11/28/2023 39 P0 øD0 P2 E1 F T W SMD Inductors Metal Composite Power Inductors MPX P1 Reel Specifications Reel Dimensions MPX1D05XX MPX1D06XX, MPX1D08XX, MPX1D10XX, MPX1D12XX, MPX1D17XX, MPX1D22XX A B W1 Enlarged A0 C Enlarged D W2 A0 C D Dimensions (mm) Case Size A B C D A0 W1 W2 MPX1D0520 Tolerance Nominal ±2.0 ø330 ±2.0 ø80 ±0.2 ø13.0 ±0.8 ø21.0 ±0.5 2.0 13.5 17.5 MPX1D0530 Tolerance Nominal ±2.0 ø330 ±2.0 ø80 ±0.2 ø13.0 ±0.8 ø21.0 ±0.5 2.0 13.5 17.5 MPX1D0618 Tolerance Nominal ±2.0 ø330 ±2.0 ø100 ±0.2 ø13.2 ±0.8 ø21.5 ±0.5 2.5 16.9 21.3 MPX1D0624 Tolerance Nominal ±2.0 ø330 ±2.0 ø100 ±0.2 ø13.2 ±0.8 ø21.5 ±0.5 2.5 16.9 21.3 MPX1D0630 Tolerance Nominal ±2.0 ø330 ±2.0 ø100 ±0.2 ø13.2 ±0.8 ø21.5 ±0.5 2.5 16.9 21.3 MPX1D0650 Tolerance Nominal ±2.0 ø330 ±2.0 ø100 ±0.2 ø13.2 ±0.8 ø21.5 ±0.5 2.5 16.9 21.3 MPX1D0830 Tolerance Nominal ±2.0 ø330 ±2.0 ø100 ±0.2 ø13.2 ±0.8 ø21.5 ±0.5 2.5 16.9 21.3 MPX1D0840 Tolerance Nominal ±2.0 ø330 ±2.0 ø100 ±0.2 ø13.2 ±0.8 ø21.5 ±0.5 2.5 16.9 21.3 MPX1D1040 Tolerance Nominal ±3.0 ø330 ±2.0 ø100 ±0.5 ø13.0 ±0.8 ø21.5 ±0.5 2.6 17.0 20.6 MPX1D1235 Tolerance Nominal ±3.0 ø330 ±2.0 ø100 ±0.5 ø13.0 ±0.8 ø21.5 ±0.5 2.6 17.0 20.6 MPX1D1250 Tolerance Nominal ±3.0 ø330 ±2.0 ø100 ±0.5 ø13.0 ±0.8 ø21.5 ±0.5 2.6 17.0 20.6 MPX1D1264 Tolerance Nominal ±3.0 ø330 ±2.0 ø100 ±0.5 ø13.0 ±0.8 ø21.5 ±0.5 2.6 17.0 20.6 MPX1D1740 Tolerance Nominal ±3.0 ø330 ±2.0 ø100 ±0.2 ø13.0 ±0.8 ø21.0 ±0.5 2.0 32.4 38.4 MPX1D1770 Tolerance Nominal ±3.0 ø330 ±2.0 ø100 ±0.2 ø13.0 ±0.8 ø21.0 ±0.5 2.0 32.4 38.4 MPX1D2213 Tolerance Nominal ±3.0 ø330 ±2.0 ø100 ±0.2 ø13.0 ±0.8 ø21.0 ±0.5 2.0 44.4 50.4 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9012_MPX • 11/28/2023 40 SMD Inductors Metal Composite Power Inductors MPX Soldering Process Recommended Reflow Soldering Profile Reference ICP/JEDEC J-STD-020E Pb-Free Assembly Preheat/Soak Temperature Minimum (TSmin) Temperature Maximum (TSmax) Time (ts) from Tsmin to Tsmax 150°C 200°C 60 – 120 seconds Ramp-Up Rate (TL to TP) 3°C/second maximum Time Above Liquidous (tL) 60 – 150 seconds Liquidous Temperature (TL) Peak Temperature (TP) 217°C 260°C for MPX1D0520, 0618, 0624 250°C for MPX1D0530, 0630, 0650, 0830, 0840 245°C for MPX1D1040, 1235, 1250, 1264, 1740, 1770, 2213 Time within 5°C of Maximum Peak Temperature (tP) Ramp-Down Rate (TP to TL) Time 25°C to Peak Temperature TP TL Temperature Profile Feature tP Maximum Ramp-up Rate = 3°C/second Maximum Ramp-down Rate = 6°C/second tL Tsmax Tsmin 25 ts 25°C to Peak Time 30 seconds maximum 6°C/second maximum 8 minutes maximum Environmental Compliance All KEMET SMD Inductors are RoHS compliant. Handling Precautions Inductors should be stored in normal working environments. While the inductors themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70% relative humidity. Atmospheres should be free of chlorine and sulfur bearing compounds. Temperature fluctuations should be minimized to avoid condensation on the parts. For optimized solderability, inductors’ stock should be used promptly, preferably within six months of receipt. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9012_MPX • 11/28/2023 41 SMD Inductors Metal Composite Power Inductors MPX KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer YAGEO Corporation and its affi liates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space fl ight. All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. When providing KEMET products and technologies contained herein to other countries, the customer must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the International Traffi c in Arms Regulations (ITAR), the US Export Administration Regulations (EAR) and the Japan Foreign Exchange and Foreign Trade Act. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9012_MPX • 11/28/2023 42