Axial Aluminum Electrolytic Capacitors
PEG227, +125°C & +150°C
Overview
Applications
KEMET's PEG227 is an Ultra-High CV electrolytic capacitor
with an outstanding electrical performance and high energy
storage capability. The device has a polarized all-welded
design, tinned copper wire leads, and a negative pole
connected to the case. The PEG227 winding is housed in
a cylindrical aluminum can with a high purity aluminum lid
and high quality rubber gasket. Low ESR is the result of a
low resistive electrolyte/paper system and an all-welded
design. Thanks to its mechanical robustness, the PEG227
is suitable for use in mobile and aircraft installations,
with operation up to +150°C. KEMET's automotive grade
capacitors meet the demanding Automotive Electronics
Council's AEC–Q200 qualification requirements.
The KEMET PEG227 is a new generation of Ultra-High CV
axial electrolytic capacitors. It is designed for automotive
applications with extremely high demands.
Benefits
• AEC–Q200 automotive qualified
• 2,000 hours at +150°C
• Ultra-High CV
• Extremely high ripple current
• Up to 27 ARMS ripple current, continuous load
• ESR stability over lifetime
• High vibration resistance
• Polarized all-welded design
• Outstanding electrical performance
Part Number System
PEG227
H
KL
432
0
M
E4
Series
Rated Voltage
(VDC)
Size Code
Capacitance Code
(µF)
Version
Capacitance
Tolerance
Packaging
Axial Aluminum
Electrolytic
H = 25
K = 40
M = 63
See Dimension
Table
The last two
digits represent
significant figures.
The first digit
indicates the total
number digits.
0 = Standard
Q = −10 + 30%
M = ±20%
E4 = Tray
Built Into Tomorrow
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
A4094_PEG227 • 8/8/2023
1
Axial Aluminum Electrolytic Capacitors – PEG227, +125°C & +150°C
Performance Characteristics
Item
Performance Characteristics
Capacitance Range
Rated Voltage
780 – 10,500 µF
25 – 63 VDC
Operating Temperature
–40 to +125°C (–40 to +150°C at derated voltage)
Capacitance Tolerance
–10/+30%, (±20% select values) at 100 Hz/+20°C
Operational Lifetime
Shelf Life
Leakage Current
Vibration Test
Specifications
Standards
D (mm)
Rated voltage, +125°C (hours)
Rated voltage, +150°C (hours)
16
6,300
1,500
18 and 20
8,400
2,000
5,000 hours at +105°C or 10 years at +40°C 0 VDC
I = 0.003 CV + 4.0 (µA)
C = rated capacitance (µF), V = rated voltage (VDC). Voltage applied for 5 minutes at +20°C.
Procedure
Requirements
1.5 mm displacement amplitude or 20 g maximum acceleration. Vibration applied
for three 22-hour sessions at 10 – 2,000 Hz (capacitor clamped by body).
No leakage of electrolyte or
other visible damage. Deviations
in capacitance from initial
measurements must not exceed:
Δ C/C < 5%
IEC 60384–4 long life grade 40/125/56, AEC–Q200
Compensation Factor of Ripple Current (RC) vs. Frequency
Frequency
100 Hz
300 Hz
1 kHz
5 kHz
100 kHz
Coefficient
0.35
0.57
0.80
1.00
1.04
Test Method & Performance
Endurance Life Test
Conditions
Performance
Temperature
Test Duration
Ripple Current
Voltage
Performance
Capacitance Change
Equivalent Series Resistance
Leakage Current
+150°C
1,500 hours (D = 16 mm)
2,000 hours (D = 18 and 20 mm)
Maximum ripple current specified in table
The sum of DC voltage and the peak AC voltage must not exceed the rated voltage of the capacitor
The following specifications will be satisfied when the capacitor is tested at +20°C:
Within 15% of the initial value
≤ 2x initial value (typically ≤ 1.3x at 90% of the lifetime)
Does not exceed leakage current limit
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
A4094_PEG227 • 8/8/2023
2
Axial Aluminum Electrolytic Capacitors – PEG227, +125°C & +150°C
Ordering Options Table
Packaging Kind
Lead and
Packaging Code
Lead Length (mm)
Standard Packaging Option
Bulk (box)
40 ±2
E1 - Obsolete
Tray
40 ±2
E4
Size Code
Tray Quantity
Size Code
Tray Quantity
KL
100
LQ
100
KP
75
ML
125
LL
135
MP
100
LP
110
Dimensions – Millimeters
END VIEW (+)
SIDE VIEW
LL
D
LL
−
+
d
L
L1
Length to Lead Bend
D
L
Dimensions in mm
L1
d
LL
±0.5
±1
Minimum
±0.03
b ±2 Box
Approximate
Weight
Grams
KL
16.2
26.7
33
1.0
40
8
KP
16.2
34.7
41
1.0
40
11
LL
18.2
26.7
33
1.0
40
11
LP
18.2
34.7
41
1.0
40
14
Size
Code
LQ
18.2
38.7
45
1.0
40
16
ML
20.2
26.7
33
1.0
40
13
MP
20.2
34.7
41
1.0
40
20
MS
20.2
42.7
49
1.0
40
24
Note: L1 is KEMET's recommendation for minimum distance between symmetrical lead bend. Available only for
customer specific part numbers. Lead bend dimensions must be specified and confirmed per article.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
A4094_PEG227 • 8/8/2023
3
Axial Aluminum Electrolytic Capacitors – PEG227, +125°C & +150°C
Shelf Life
The capacitance, ESR, and impedance of a capacitor will not change significantly after extended storage periods; however,
the leakage current will very slowly increase. KEMET products are particularly stable and allow a shelf life in excess of ten
years at 40°C. See sectional specification under each product series for specific data.
Failure Rate
Estimated field failure rate: ≤ 0.15 ppm (failures per year/produced number of capacitors per year).
The expected failure rate for this capacitor range is based on field experience for capacitors with structural similarity.
Environmental Compliance
All Part Numbers in this datasheet are Reach and RoHS compliant and Halogen-Free.
As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental
effects of both our capacitors and their production.
In Europe (RoHS Directive) and in some other geographical areas such as China, legislation has been put in place to prevent
the use of some hazardous materials, such as lead (Pb), in electronic equipment. All products in this catalog are produced
to help our customers' obligations to guarantee their products and fulfill these legislative requirements. The only material of
concern in our products has been lead (Pb), which has been removed from all designs to fulfill the requirement of containing
less than 0.1% of lead in any homogeneous material. KEMET will closely follow any changes in legislation worldwide and
make any necessary changes in its products, whenever needed.
Some customer segments such as medical, military and automotive electronics may still require the use of lead in electrode
coatings. To clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels
for RoHS compatible capacitors.
Due to customer requirements, there may appear additional markings such as lead-free (LF), or lead-free wires (LFW) on the
label.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
A4094_PEG227 • 8/8/2023
4
Axial Aluminum Electrolytic Capacitors – PEG227, +125°C & +150°C
Table 1 – Ratings & Part Number Reference
1
2
Rated
Voltage
De-Rated
Voltage
150°C
Rated
Capacitance
(VDC)
(VDC)
100 Hz
20°C (µF)
25
25
25
25
25
25
25
25
40
40
40
40
40
40
40
40
63
63
63
63
63
63
63
63
18
18
18
18
18
18
18
18
32
32
32
32
32
32
32
32
54
54
54
54
54
54
54
54
3,200
4,600
4,300
6,200
7,100
5,600
8,100
10,500
1,500
2,200
2,100
3,000
3,500
2,700
4,200
5,200
780
1,100
1,100
1,600
1,900
1,500
2,100
2,800
KL
KP
LL
LP
LQ
ML
MP
MS
KL
KP
LL
LP
LQ
ML
MP
MS
KL
KP
LL
LP
LQ
ML
MP
MS
16 x 27
16 x 35
18 x 27
18 x 35
18 x 39
20 x 27
20 x 35
20 x 43
16 x 27
16 x 35
18 x 27
18 x 35
18 x 39
20 x 27
20 x 35
20 x 43
16 x 27
16 x 35
18 x 27
18 x 35
18 x 39
20 x 27
20 x 35
20 x 43
Rated
Voltage
De-Rated
Voltage 150°C
Rated
Capacitance
Size
Code
Case
Size
Size
Code
Ripple Current
Case
Size
Maximum
Rated
Maximum
(Reduced
Voltage)
DxL
(mm)
≥ 5 kHz
≥ 5 kHz
≥ 5 kHz
125°C (A)1 140°C (A)2 150°C (A)2
≥ 5 kHz
125°C (A)
≥ 5 kHz
125°C (A)
Part Number Options
6.2
7.4
7
8.3
8.8
7.6
9
9.9
6
7.2
6.9
8.2
8.7
7.4
9
9.8
4.6
5.7
5.5
6.7
7.2
6.1
7.5
8.5
7.8
9.3
8.9
10.5
11.1
9.6
11.4
12.5
7.6
9.1
8.7
10.4
11
9.4
11.4
12.4
5.9
7.2
6.9
8.5
9.1
7.8
9.5
10.7
PEG227HKL4320ME4
PEG227HKP4460ME4
PEG227HLL4430QE4
PEG227HLP4620QE4
PEG227HLQ4710QE4
PEG227HML4560QE4
PEG227HMP4810QE4
PEG227HMS5100QE4
PEG227KKL4150ME4
PEG227KKP4220ME4
PEG227KLL4210QE4
PEG227KLP4300QE4
PEG227KLQ4350QE4
PEG227KML4270QE4
PEG227KMP4420QE4
PEG227KMS4520QE4
PEG227MKL3780QE4
PEG227MKP4110QE4
PEG227MLL4110QE4
PEG227MLP4160QE4
PEG227MLQ4190QE4
PEG227MML4150QE4
PEG227MMP4210QE4
PEG227MMS4280QE4
17.2
19.3
19.4
21.6
22.2
23.1
25.7
27.1
16.8
19
19
21.2
22
22.7
25.5
26.7
12.9
14.9
15.2
17.3
18.2
18.8
21.3
23.4
10.9
12.2
12.3
13.6
14.1
14.6
16.2
17.1
10.6
12
12
13.4
13.9
14.4
16.1
16.9
8.2
9.4
9.6
11
11.5
11.9
13.5
14.8
4.9
5.5
5.5
6.1
6.3
6.5
7.3
7.7
4.8
5.4
5.4
6
6.2
6.4
7.2
7.6
3.7
4.2
4.3
4.9
5.1
5.3
6
6.6
Ripple Current
Part Number
Part Number
Capacitor-mounted with low thermal resistance path (heat-sink).
Valid for capacitor supplied with reduced DC voltage, capacitor-mounted with low thermal resistance path.
ESR Maximum
Part Number
100 Hz
20°C (mΩ)
100 kHz
20°C (mΩ)
5–100 kHz
125–150°C (mΩ)
Part Number Options
49
35
37
27
24
30
22
18
67
47
49
35
31
40
27
23
107
76
77
55
47
60
43
34
32
23
24
18
16
20
15
13
32
23
24
18
16
20
14
13
45
32
33
24
21
27
20
16
12.1
9.6
10.4
8.4
7.9
9.8
7.9
7.1
12.6
9.9
10.8
8.7
8.1
10.1
8
7.3
21.3
16
16.9
13
11.8
14.8
11.5
9.8
PEG227HKL4320ME4
PEG227HKP4460ME4
PEG227HLL4430QE4
PEG227HLP4620QE4
PEG227HLQ4710QE4
PEG227HML4560QE4
PEG227HMP4810QE4
PEG227HMS5100QE4
PEG227KKL4150ME4
PEG227KKP4220ME4
PEG227KLL4210QE4
PEG227KLP4300QE4
PEG227KLQ4350QE4
PEG227KML4270QE4
PEG227KMP4420QE4
PEG227KMS4520QE4
PEG227MKL3780QE4
PEG227MKP4110QE4
PEG227MLL4110QE4
PEG227MLP4160QE4
PEG227MLQ4190QE4
PEG227MML4150QE4
PEG227MMP4210QE4
PEG227MMS4280QE4
ESR
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Part Number
A4094_PEG227 • 8/8/2023
5
Axial Aluminum Electrolytic Capacitors – PEG227, +125°C & +150°C
Marking
KEMET logo, Polarity Indication
Part Number
Batch Number
[Year, Calendar Week,
Serial Number (YYWW1234)]
Rated Capacitance, Rated Voltage
Construction
Tinned Copper
Wire Lead (−)
Aluminum Can
Welded
Terminal Tab (+)
High Purity
Aluminum Lid
Tinned Copper
Wire Lead (+)
Rubber Gasket
Detailed Cross Section
High Purity
Aluminum Lid
Welded Terminal
Tab (+)
Margin
Aluminum Can
Paper Spacer Impregnated
with Electrolyte
(First Layer)
Cathode Aluminum Foil,
Etched (Second Layer)
Tinned Copper
Paper Spacer Impregnated
Wire Lead (+)
with Electrolyte
Anode Aluminum Foil, Etched,
(Third Layer)
Covered with Aluminum Oxide
(Fourth Layer)
Rubber Gasket
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Welded
Terminal Tab (−)
Extended Cathode
Tinned Copper
Wire Lead (−)
A4094_PEG227 • 8/8/2023
6
Axial Aluminum Electrolytic Capacitors – PEG227, +125°C & +150°C
Construction Data
The manufacturing process begins with the anode foil being
electrochemically etched to increase the surface area and
then “formed” to produce the aluminum oxide layer. Both the
anode and cathode foils are then interleaved with absorbent
paper and wound into a cylinder. During the winding process,
aluminum tabs are attached to each foil to provide the
electrical contact.
The winding is assembled to the capacitor Al-can and to
the Al-lid. The can is filled with electrolyte and the winding
is impregnated during a vacuum treatment. The capacitor
is sealed. Throughout the process, all materials inside the
housing must be maintained at the highest purity and be
compatible with the electrolyte.
Each capacitor is aged and tested before being packed. The
purpose of aging is to repair any damage in the oxide layer
and thus reduce the leakage current to a very low level. Aging
is carried out at elevated temperature and is accomplished by
applying voltage to the device while carefully controlling the
supply current. The process takes between 2 and 20 hours,
depending on voltage rating.
Damage to the oxide layer can occur due to a variety of
reasons:
• Slitting of the anode foil after forming
• Attaching the tabs to the anode foil
• Minor mechanical damage caused during winding
The following tests are applied for each individual capacitor.
Electrical:
• Leakage current
• Capacitance
• ESR
• Tan Delta
Mechanical/Visual:
• Pull strength test of wire terminals
• Print detail
• Box labels
• Packaging, including packed quantity
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Extended cathode
Anode foil
Foil tab
Tissues
Cathode foil
Etching
Forming
Winding
Assembly
Filling (elyt)
Impregnation
Sealing
Aging
Testing
Labeling
Packing
A4094_PEG227 • 8/8/2023
7
Axial Aluminum Electrolytic Capacitors – PEG227, +125°C & +150°C
KEMET Electronics Corporation Sales Offices
For a complete list of our global sales offi ces, please visit www.kemet.com/sales.
Disclaimer
YAGEO Corporation and its affi liates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space fl ight.
All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes
no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury
or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other
measures may not be required.
KEMET requires its products to be packaged and shipped on pallets. This is because KEMET’s products are specifi cally designed to be packed onto pallets during
shipment. If for any reason, the products are removed from pallets by the shipping party and shipped to the end customer, then additional external protection is
required. In this instance, an external box with two carton layers and an upwards orientation sticker must be used by the shipping party, with the empty space fi lled
with fi lling material, and afterwards sealing the box. If this packing and packaging guideline is not followed by the shipping party, the shipping party, and not KEMET,
will be held responsible for any packaging, packing and/or product damages upon delivery of the products to the end customer. KEMET hereby disclaims any liability
for damages to the products or otherwise that have been, or threaten to be, infl icted, result from or are in any way related to the packaging, packing or damage by the
shipping party in contravention of the packing and packaging guidelines herein.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
A4094_PEG227 • 8/8/2023
8