PEH534YDC3220M2

Snap-In Aluminum Electrolytic Capacitors PEH534, +105°C Overview Applications KEMET's PEH534 is a long-life electrolytic capacitor designed to offer high ripple current capability and low mounting cost. Low ESR is the result of a very low resistive paper/electrolyte system. Low ESR, together with the TDC thermal concept, gives the PEH534 a high ripple current capability. Typical applications for KEMET's PEH534 capacitor include switch mode power supplies (SMPS), drives, welding equipment, uninterruptible power supplies (UPS), and other power electronic applications where high current ratings and compact size are important. Benefits • Snap-In • 3,000 hours at +105°C (VR , IR applied) • PCB mounting • Low ESR and ESL • High ripple current Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality Part Number System PEH534 J BC 456 0 M 2 Series Rated Voltage (VDC) Size Code Capacitance Code (µF) Version Capacitance Tolerance Termination 0 = Standard M = ±20% Snap-In type Aluminum Electrolytic J = 35 M = 63 P = 100 R = 200 S = 250 U = 350 V = 400 Y = 450 See Dimension Table The last two digits represent significant figures. The first digit indicates the total number digits. See Termination Table Built Into Tomorrow © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com A4024_PEH534 • 2/18/2021 1 Snap-In Aluminum Electrolytic Capacitors – PEH534, +105°C Performance Characteristics Item Performance Characteristics Capacitance Range 150 – 22,000 µF Rated Voltage 35 – 450 VDC Operating Temperature −40 to +105°C Capacitance Tolerance ±20% at 100 Hz/+20°C Operational Lifetime Shelf Life Leakage Current Vibration Test Specifications Standards D (mm) Rated Voltage and Ripple Current at +105°C (hours) Rated Voltage at +105°C (hours) 22 – 40 3,000 4,000 4 years at +40°C 0 VDC I = 0.003 CV (µA) C = rated capacitance (µF), V = rated voltage (VDC). Voltage applied for 5 minutes at +20°C. Procedure Requirements 0.75 mm displacement amplitude or 10 g maximum acceleration. Vibration applied for three 2-hour sessions at 10 – 500 Hz (Capacitor clamped by body). No leakage of electrolyte or other visible damage. Deviations in capacitance from initial measurements must not exceed: Δ C/C < 5% IEC 60384–4 long life grade 40/105/56, in accordance with CECC 30 301–809 Test Method & Performance Endurance Life Test Conditions Performance Temperature +105°C Test Duration 2,000 hours Ripple Current Voltage Performance Capacitance Change Equivalent Series Resistance Leakage Current Maximum ripple current specified in table The sum of DC voltage and the peak AC voltage must not exceed the rated voltage of the capacitor The following specifications will be satisfied when the capacitor is tested at +20°C: ≤ 160 V Within 15% of the initial value > 160 V Within 10% of the initial value Does not exceed 200% of the initial value Does not exceed leakage current limit © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com A4024_PEH534 • 2/18/2021 2 Snap-In Aluminum Electrolytic Capacitors – PEH534, +105°C Dimensions – Millimeters Dimensions in mm D1 L1 DXL Size Code ±0.5 ±1.0 Approximate Weight Grams 25 x 30 25 x 35 25 x 40 25 x 45 25 x 50 30 x 25 30 x 30 30 x 35 30 x 40 BC BD BE BF BG CB CC CD CE 25.5 25.5 25.5 25.5 25.5 30.5 30.5 30.5 30.5 31 36 41 46 51 26 31 36 41 21 24 27 30 33 24 29 34 39 30 x 45 30 x 50 35 x 25 35 x 30 35 x 35 35 x 40 35 x 45 35 x 50 CF CG DB DC DD DE DF DG 30.5 30.5 35.5 35.5 35.5 35.5 35.5 35.5 46 51 26 31 36 41 46 51 45 51 32 40 48 56 64 72 Note: Add 0.5 mm to D and 1 mm to L for Sleeving © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com A4024_PEH534 • 2/18/2021 3 Snap-In Aluminum Electrolytic Capacitors – PEH534, +105°C Termination Tables Termination Code 2 2S 3 25 • • • 30 • • • 35 • • • Diameter (mm) 4 4S • • Mounting: These capacitors are designed to be mounted by their terminations alone and may be used in any position. Dummy pins on 4-pin decks must be isolated. Termination Code LL Termination Style ±1 Standard Termination Option 2 2 Pin 6.3 Other Termination Options 2S 2 Pin 4.0 3 3 Pin 4.0 4 4 Pin 6.3 4S 4 Pin 4.0 Dimensions in mm Style 2/2S SIDE VIEW PCB LAYOUT TERMINAL END VIEW L D 2 ±0.1 LL Style 3 SIDE VIEW Ø2.5 Minimum + ve 3.3 ±0.1 D SIDE VIEW 4.75 ±0.1 TERMINAL END VIEW L Ø2 ±0.1 Typical - + LL Style 4/4S PCB LAYOUT TERMINAL END VIEW L 10 ±0.1 10 ±0.1 PCB LAYOUT 4 Holes Ø2 ±0.1 on a Ø22.5 PCD - ve - D + 30° 30° LL © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com + ve A4024_PEH534 • 2/18/2021 4 Snap-In Aluminum Electrolytic Capacitors – PEH534, +105°C Shelf Life The capacitance, ESR and impedance of a capacitor will not change significantly after extended storage periods, however the leakage current will very slowly increase. KEMET products are particularly stable and allow a shelf life in excess of three years at 40°C. See sectional specification under each product series for specific data. Re-age (Reforming) Procedure Apply the rated voltage to the capacitor at room temperature for a period of one hour, or until the leakage current has fallen to a steady value below the specified limit. During re-aging a maximum charging current of twice the specified leakage current or 5 mA (whichever is greater) is suggested. Reliability The reliability of a component can be defined as the probability that it will perform satisfactorily under a given set of conditions for a given length of time. In practice, it is impossible to predict with absolute certainty how any individual component will perform; thus, we must utilize probability theory. It is also necessary to clearly define the level of stress involved (e.g. operating voltage, ripple current, temperature and time). Finally, the meaning of satisfactory performance must be defined by specifying a set of conditions which determine the end of life of the component. Reliability as a function of time, R(t), is normally expressed as: R(t)=e-λt where R(t) is the probability that the component will perform satisfactorily for time t, and λ is the failure rate. Failure Rate The failure rate is the number of components failing per unit time. The failure rate of most electronic components follows the characteristic pattern: • Early failures are removed during the manufacturing process. • The operational life is characterized by a constant failure rate. • The wear out period is characterized by a rapidly increasing failure rate. The failures in time (FIT) are given with a 60% confidence level for the various type codes. By convention, FIT is expressed as 1 x 10-9 failures per hour. Failure rate is also expressed as a percentage of failures per 1,000 hours. e.g., 100 FIT = 1 x 10-7 failures per hour = 0.01%/1,000 hours End of Life Definition Catastrophic Failure: short circuit, open circuit or safety vent operation Parametric Failure: • Change in capacitance > ±10% • Leakage current > specified limit • ESR > 2 x initial ESR value © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com A4024_PEH534 • 2/18/2021 5 Snap-In Aluminum Electrolytic Capacitors – PEH534, +105°C MTBF The mean time between failures (MTBF) is simply the inverse of the failure rate. MTBF= 1/λ Failure Rate early failures wear out operational life Time The failure rate is derived from our periodic test results. The failure rate (λR) is, therefore, only given at test temperature for life tests. An estimation is also given at 40°C. The expected failure rate for this capacitor range is based on our periodic test results for capacitors with structural similarity. Failure rate is frequently quoted in FIT (Failures In Time) where 1 FIT = 1 x 10-9 failures per hour. Failure rate per hour includes both catastrophic and parametric failures. Environmental Compliance All Part Numbers in this datasheet are Reach and RoHS compliant. As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental effects of both our capacitors and their production. In Europe (RoHS Directive) and in some other geographical areas such as China, legislation has been put in place to prevent the use of some hazardous materials, such as lead (Pb), in electronic equipment. All products in this catalog are produced to help our customers' obligations to guarantee their products and fulfill these legislative requirements. The only material of concern in our products has been lead (Pb), which has been removed from all designs to fulfill the requirement of containing less than 0.1% of lead in any homogeneous material. KEMET will closely follow any changes in legislation worldwide and make any necessary changes in its products, whenever needed. Some customer segments such as medical, military and automotive electronics may still require the use of lead in electrode coatings. To clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels for RoHS compatible capacitors. Due to customer requirements, there may appear additional markings such as lead-free (LF), or lead-free wires (LFW) on the label. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com A4024_PEH534 • 2/18/2021 6 Snap-In Aluminum Electrolytic Capacitors – PEH534, +105°C Table 1 – Ratings & Part Number Reference VDC 35 35 35 35 35 35 35 35 35 35 35 63 63 63 63 63 63 63 63 63 63 63 100 100 100 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 250 250 250 250 250 250 250 250 250 250 250 250 350 350 350 350 350 350 350 VDC Rated Capacitance 100 Hz 20°C (µF) 5600 6800 6800 8200 8200 8200 10000 10000 15000 15000 22000 2200 3300 3300 4700 4700 5600 5600 6800 6800 8200 10000 1500 1500 2200 2200 3300 3300 3900 4700 470 560 560 680 680 680 820 820 1000 1000 1500 390 390 470 470 470 560 560 680 680 820 820 1000 220 220 220 330 330 390 390 Rated Capacitance Size Code Ripple Current Maximum Case Size D x L (mm) BC BD CB BE CC DB BF CD CF DD DG BC BE CC CE DC CF DD CG DE DF DG BE CC CE DC CG DE DF DG BD BE CC BF CD DC CE DC CG DD DF BE CC BF CD DC BG CE CF DD CG DE DF BE CC DB CE DC CF DD 25 x 30 25 x 35 30 x 25 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 30 x 45 35 x 35 35 x 50 25 x 30 25 x 40 30 x 30 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 25 x 40 30 x 30 30 x 40 35 x 30 30 x 50 35 x 40 35 x 45 35 x 50 25 x 35 25 x 40 30 x 30 25 x 45 30 x 35 35 x 30 30 x 40 35 x 30 30 x 50 35 x 35 35 x 45 25 x 40 30 x 30 25 x 45 30 x 35 35 x 30 25 x 50 30 x 40 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 25 x 40 30 x 30 35 x 25 30 x 40 35 x 30 30 x 45 35 x 35 Size Code Case Size 100 Hz 105°C (A) 2.3 2.7 2.9 3.1 3.5 3.1 3.5 4.1 5.3 4.5 6.2 1.9 2.5 2.7 3.6 3.1 4.0 3.7 4.5 4.2 4.7 5.2 1.9 2.0 2.6 2.4 3.3 3.3 3.6 4.1 1.1 1.3 1.3 1.4 1.5 1.5 1.7 1.6 2.0 1.9 2.5 1.1 1.1 1.3 1.3 1.3 1.4 1.5 1.7 1.7 1.9 1.9 2.2 0.9 0.9 0.9 1.2 1.2 1.4 1.4 20 kHz 40°C (A) 7.6 9.0 9.8 10.2 12.1 10.0 11.3 14.3 17.8 14.4 20.1 6.9 9.3 10.6 14.0 11.2 15.6 13.3 17.1 15.2 16.8 18.4 7.0 7.4 9.8 8.8 12.4 11.7 13.1 14.5 7.1 8.0 8.9 8.9 10.4 9.8 11.8 9.8 13.9 11.6 14.7 7.9 8.7 8.8 10.1 9.6 9.6 11.4 12.8 11.5 14.2 13.1 14.6 5.8 6.0 5.8 8.0 7.4 9.0 8.6 Ripple Current ESR Maximum 100 Hz 20°C (mΩ) 54 43 40 36 31 37 31 25 17 21 14 92 61 56 39 44 33 36 28 30 26 22 140 130 91 96 62 64 54 46 290 250 240 200 200 200 160 170 130 140 93 290 280 240 240 240 200 200 160 170 140 140 110 560 550 560 370 370 310 320 100 kHz 20°C (mΩ) 43 34 31 28 23 29 24 18 13 17 11 43 34 31 28 23 29 24 18 13 17 11 110 100 70 75 48 50 43 36 160 130 130 110 100 110 87 93 71 75 51 140 140 120 110 120 100 95 79 83 66 69 57 350 340 350 230 230 190 200 ESR Part Number PEH534JBC4560M(1) PEH534JBD4680M(1) PEH534JCB4680M(1) PEH534JBE4820M(1) PEH534JCC4820M(1) PEH534JDB4820M(1) PEH534JBF5100M(1) PEH534JCD5100M(1) PEH534JCF5150M(1) PEH534JDD5150M(1) PEH534JDG5220M(1) PEH534MBC4220M(1) PEH534MBE4330M(1) PEH534MCC4330M(1) PEH534MCE4470M(1) PEH534MDC4470M(1) PEH534MCF4560M(1) PEH534MDD4560M(1) PEH534MCG4680M(1) PEH534MDE4680M(1) PEH534MDF4820M(1) PEH534MDG5100M(1) PEH534PBE4150M(1) PEH534PCC4150M(1) PEH534PCE4220M(1) PEH534PDC4220M(1) PEH534PCG4330M(1) PEH534PDE4330M(1) PEH534PDF4390M(1) PEH534PDG4470M(1) PEH534RBD3470M(1) PEH534RBE3560M(1) PEH534RCC3560M(1) PEH534RBF3680M(1) PEH534RCD3680M(1) PEH534RDC3680M(1) PEH534RCE3820M(1) PEH534RDC3820M(1) PEH534RCG4100M(1) PEH534RDD4100M(1) PEH534RDF4150M(1) PEH534SBE3390M(1) PEH534SCC3390M(1) PEH534SBF3470M(1) PEH534SCD3470M(1) PEH534SDC3470M(1) PEH534SBG3560M(1) PEH534SCE3560M(1) PEH534SCF3680M(1) PEH534SDD3680M(1) PEH534SCG3820M(1) PEH534SDE3820M(1) PEH534SDF4100M(1) PEH534UBE3220M(1) PEH534UCC3220M(1) PEH534UDB3220M(1) PEH534UCE3330M(1) PEH534UDC3330M(1) PEH534UCF3390M(1) PEH534UDD3390M(1) Part Number (1) Termination code: See Termination Tables for available options. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com A4024_PEH534 • 2/18/2021 7 Snap-In Aluminum Electrolytic Capacitors – PEH534, +105°C Table 1 – Ratings & Part Number Reference cont. VDC 350 350 400 400 400 400 400 400 400 400 400 400 400 450 450 450 450 450 450 450 450 450 VDC Rated Capacitance 100 Hz 20°C (µF) 470 560 150 150 220 220 220 330 330 390 390 470 560 150 150 150 220 220 330 330 390 470 Rated Capacitance Size Code Ripple Current Maximum Case Size D x L (mm) DE DF BD CB BF CD DC CF DD CG DE DF DG BE CC DB CE DC CG DE DF DG 35 x 40 35 x 45 25 x 35 30 x 25 25 x 45 30 x 35 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 25 x 40 30 x 30 35 x 25 30 x 40 35 x 30 30 x 50 35 x 40 35 x 45 35 x 50 Size Code Case Size 100 Hz 105°C (A) 1.6 1.8 0.8 0.8 1.0 1.0 1.1 1.4 1.4 1.5 1.5 1.8 2.0 0.9 0.9 0.9 1.2 1.2 1.5 1.5 1.7 1.9 20 kHz 40°C (A) 9.7 10.9 5.1 5.2 6.5 7.1 7.0 9.2 8.7 10.2 9.8 11.1 12.3 5.8 6.1 5.9 8.1 7.5 10.3 9.9 11.3 12.4 Ripple Current ESR Maximum 100 Hz 20°C (mΩ) 260 220 680 680 470 460 460 310 310 260 260 220 180 570 560 570 380 390 260 260 220 180 100 kHz 20°C (mΩ) 160 140 410 400 280 270 280 180 190 160 160 130 110 330 330 330 220 230 150 150 130 110 ESR Part Number PEH534UDE3470M(1) PEH534UDF3560M(1) PEH534VBD3150M(1) PEH534VCB3150M(1) PEH534VBF3220M(1) PEH534VCD3220M(1) PEH534VDC3220M(1) PEH534VCF3330M(1) PEH534VDD3330M(1) PEH534VCG3390M(1) PEH534VDE3390M(1) PEH534VDF3470M(1) PEH534VDG3560M(1) PEH534YBE3150M(1) PEH534YCC3150M(1) PEH534YDB3150M(1) PEH534YCE3220M(1) PEH534YDC3220M(1) PEH534YCG3330M(1) PEH534YDE3330M(1) PEH534YDF3390M(1) PEH534YDG3470M(1) Part Number (1) Termination code: See Termination Tables for available options. Mechanical Data The capacitor may be mounted in any position. PEH534 is supplied with an insulation sleeve. Voltage proof of the insulation sleeve = 2.5 kVDC (1 min). The minus pole is marked on the case surface. UL recognized sleeving is available for custom parts in this range, upon request. (UL No. E358957) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com A4024_PEH534 • 2/18/2021 8 Snap-In Aluminum Electrolytic Capacitors – PEH534, +105°C Marking KEMET Logo Part Number Code Operating Temperature Date of Manufacture, Batch Number Rated Capacitance, Rated Voltage (VDC) Polarity Stripe (−) Construction Detailed Cross Section Termination Pin Insulating End Disc Polarity Stripe (−) Aluminum Can with Safety Vent Rubber Seal Tab Connection to Terminal Margin Wound Element Tabs Aluminum Can Insulating Sleeve Insulating Sleeve Rubber Seal Paper Spacer Impregnated with Electrolyte (First Layer) Termination Pin (+) Cathode Aluminum Foil, Etched (Second Layer) Paper Spacer Impregnated with Electrolyte (Third Layer) Termination Pin (−) Anode Aluminum Foil, Etched, Covered with Aluminum Oxide (Fourth Layer) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com A4024_PEH534 • 2/18/2021 9 Snap-In Aluminum Electrolytic Capacitors – PEH534, +105°C Construction Data The manufacturing process begins with the anode foil being electrochemically etched to increase the surface area and then “formed” to produce the aluminum oxide layer. Both the anode and cathode foils are then interleaved with absorbent paper and wound into a cylinder. During the winding process, aluminum tabs are attached to each foil to provide the electrical contact. Extended cathode Anode foil The deck, complete with terminals, is attached to the tabs and then folded down to rest on top of the winding. The complete winding is impregnated with electrolyte before being housed in a suitable container, usually an aluminum can, and sealed. Throughout the process, all materials inside the housing must be maintained at the highest purity and be compatible with the electrolyte. Each capacitor is aged and tested before being sleeved and packed. The purpose of aging is to repair any damage in the oxide layer and thus reduce the leakage current to a very low level. Aging is normally carried out at the rated temperature of the capacitor and is accomplished by applying voltage to the device while carefully controlling the supply current. The process may take several hours to complete. Damage to the oxide layer can occur due to variety of reasons: • Slitting of the anode foil after forming • Attaching the tabs to the anode foil • Minor mechanical damage caused during winding A sample from each batch is taken by the quality department after completion of the production process. The following tests are applied and may be varied at the request of the customer. In this case the batch, or special procedure, will determine the course of action. Electrical: • Leakage current • Capacitance • ESR • Impedance • Tan Delta Mechanical/Visual: • Overall dimensions • Torque test of mounting stud • Print detail • Box labels • Packaging, including packed quantity © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Foil tabs Tissues Cathode foil Etching Forming Winding Decking Impregnation Assembly Aging Testing Sleeving Packing A4024_PEH534 • 2/18/2021 10 Snap-In Aluminum Electrolytic Capacitors – PEH534, +105°C KEMET Electronics Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com A4024_PEH534 • 2/18/2021 11