PFR5221J1000J11L4BULK

General Purpose, Pulse and DC Transient Suppression PFR Polypropylene Film/Foil, Radial Overview Applications The PFR Series is a capacitor with polypropylene film and metal foil electrodes, encapsulated in self-extinguishing resin in a box of material meeting the requirements of UL 94 V–0. Typical applications include high speed applications requiring low losses at high frequencies and high dV/ dt, such as electrical ballasts, televisions, video and telecommunications. Benefits • Rated voltage: 63 – 1,000 VDC • Rated voltage: 40 – 250 VAC • Capacitance range: 0.0001 – 0.022 µF • Lead spacing: 5 mm • Capacitance tolerance: ±1%, ±2%, ±2.5%, ±5%, ±10% • Climatic category: 55/100/56, IEC 60068–1 • Tape & Reel packaging in accordance with IEC 60286–2 • RoHS Compliant and lead-free terminations • Category temperature range of −55°C to +100°C Customer Part Number PFR 5 101 J 63 J11 L4BULK Series Lead Spacing (mm) Capacitance Code (pF) Capacitance Tolerance Rated Voltage (VDC) Size Code Packaging Polypropylene Film/ Foil 5 (Standard) See Dimension Table See Ordering Options Table First two digits represent significant figures. Third digit specifies number of zeros. F = ±1% G = ±2% H = ±2.5% J = ±5% K = ±10% 63 = 63 100 = 100 250 = 250 400 = 400 630 = 630 1000 = 1,000 KEMET Internal Part Number F 411 J Capacitor Class Series Lead Spacing (mm) F = Film Polypropylene Film/Foil J = 5.0 H 101 J 063 C Size Code Capacitance Code (pF) Capacitance Tolerance Rated Voltage (VDC) Packaging First two digits represent significant figures. Third digit specifies number of zeros. F = ±1% G = ±2% R = ±2.5% J = ±5% K = ±10% 063 = 63 100 = 100 250 = 250 400 = 400 630 = 630 1K0 = 1,000 See Dimension Table See Ordering Options Table Built Into Tomorrow © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3036_PFR • 8/14/2023 1 Film Capacitors – General Purpose, Pulse and DC Transient Suppression PFR Polypropylene Film/Foil, Radial Ordering Options Table Lead Spacing Nominal (mm) Type of Leads and Packaging Lead Length (mm) KEMET Legacy Lead and Lead and Packaging Packaging Code Code Standard Lead and Packaging Options Bulk (Bag) – Short Leads Tape & Reel (Standard Reel F 360 mm) 5 4 +1/−0 H0= 18.5 ±0.5 C L L4BULK L16.5TR18 H0= 16.5 ±0.5 H0= 18.5 ±0.5 H0= 18.5 ±0.5 Q R P L16.5TA16 L16.5TA18 L16.5LR18 Other Lead and Packaging Options Ammo Pack Ammo Pack Tape & Reel (Large Reel F 500 mm) Dimensions – Millimeters L T H S LL F KEMET Size Code Legacy Size Code JH JK JR J11 J12 J13 S T H L F Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 5 5 5 −0.4 −0.4 −0.4 4.5 5.5 6.5 0/−0.5 0/−0.5 0/−0.5 6 7 8 0/−0.5 0/−0.5 0/−0.5 7.2 7.2 7.2 0/−0.5 0/−0.5 0/−0.5 0.5 0.5 0.5 ±0.05 ±0.05 ±0.05 Note: See Ordering Options Table for lead length (LL) options. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3036_PFR • 8/14/2023 2 Film Capacitors – General Purpose, Pulse and DC Transient Suppression PFR Polypropylene Film/Foil, Radial Performance Characteristics Voltage Range (VDC) 63 100 250 400 630 1,000 Voltage Range (VAC) 40 63 160 220 250 250 0.0001 – 0.022 0.0001 – 0.01 0.0001 – 0.0068 0.0001 – 0.0068 0.0001 – 0.0047 0.0001 – 0.001 Capacitance Range (µF) Capacitance Values In accordance with IEC E12 series Capacitance Tolerance ±1%, ±2%, ±2.5%, ±5%, ±10% Category Temperature Range −55°C to +100°C. An operating temperature up to +105°C is allowed under certain conditions. Please consult KEMET for details Climatic Category IEC 60068–1, 55/100/56 Capacitance Drift Maximum 0.3% after a 2 year storage period at a temperature of +10°C to +40°C and a relative humidity of 40% to 60% Temperature Coefficient −200 (+50, -100) ppm/°C at 1 kHz Self-Inductance Approximately 6 nH/cm for the total length of capacitor winding and the leads Maximum Values at +23°C C ≤ 0.001 µF 0.001 µF < C ≤ 0.0047 µF C > 0.0047 µF 1 kHz 0.0004 0.0004 0.0004 10 kHz 0.0004 0.0005 0.0007 100 kHz 0.0005 0.0007 – Dissipation Factor tanδ Measured at +20°C, according to IEC 60384–13 Insulation Resistance Between Terminals: ≥ 100,000 MΩ Resonance Frequencies Z (Ω) 10 1.0 pF 100 100 µF 2 µF 10 0 pF 0.01 1 0.02 0.01 1,00 0.1 1,000 MHz © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3036_PFR • 8/14/2023 3 Film Capacitors – General Purpose, Pulse and DC Transient Suppression PFR Polypropylene Film/Foil, Radial Environmental Test Data Test Voltage Proof IEC Publication 60384–1 Clause 4.6 Clause 4.6 2.3 Procedure 1.6 x VR after 60 seconds 2 x VR (minimum 400 VDC to case) after 60 seconds 6 hours with 10 – 500 Hz and 0.75 mm amplitude or 98 m/s2 depending on frequency Vibration 60068–2–6 Test Fc Bump 60068–2–29 Test Eb 4,000 bumps with 390 m/s2 mounted on PCB Resistance to Soldering Heat 60068–2–20 Method 1A Solder bath at + 260°C ±5°C with screening Climatic Sequence 60384–1 Paragraph 4:21 Damp Heat Steady State 60068–2–3 Test Ca Endurance, AC Charge and Discharge 60384–17 Paragraph 4.13 60068–2.2 dry heat 16 hours 60068–2–34 damp heat, one cycle 60068–2–1 Test Aa 2 hours +40°C and 90 – 95% RH Requirements The capacitors must withstand the voltage without breakdowns or flashovers and without decreased insulation resistance below the value in each detail specification. No visible damage As above No visible damage tanδ ≤ 1.2 x stated value at 100 kHz Δ C/C ≤ ±0.5% Δ C/C ≤ ±0.5% tanδ ≤ 1.2 x stated value at 100 kHz Insulation resistance: ≥ 100,000 MΩ for CR ≤ 0.33 µF ≥ 30,000 MΩ, µF for CR > 0.33 µF Immersion of the terminations into the solder bath shall be completed in a time not exceeding 1 second and the terminations shall remain immersed to the specified depth for 10 + 1 second and then be withdrawn. ∆ C/C ≤ ±1.0% tanδ increase < 0.001 No visible damage Insulation resistance: ≥ 100,000 MΩ for CR ≤ 0.33 µF ≥ 30,000 MΩ, µF for CR > 0.33 µF Δ C/C ≤ ±0.5% tanδ ≤ 1.2 x stated value at 100 kHz 56 days no visible damage Insulation resistance: ≥ 50,000 MΩ for CR ≤ 0.33 µF ≥ 15,000 MΩ, µF for CR > 0.33 µF Δ C/C ≤ ±1% tanδ ≤ 1.2 x stated value at 100 kHz 1,000 hours at +85°C and 1.25 x VR AC No visible damage Δ C/C ≤ ±3% tanδ ≤ 1.5 x stated value at 100 kHz Insulation resistance: ≥ 100,000 MΩ for CR ≤ 0.33 µF ≥ 30,000 MΩ, µF for CR > 0.33 µF 10,000 pulses and with (2 x) dV/dt according to detail specification tanδ (100 kHz) ≤ 2 x stated value (100 kHz) Δ C/C ≤ ±0.5% Insulation resistance: ≥ 50,000 MΩ for CR ≤ 0.33 µF ≥ 15,000 MΩ • µF for CR > 0.33 µF © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3036_PFR • 8/14/2023 4 Film Capacitors – General Purpose, Pulse and DC Transient Suppression PFR Polypropylene Film/Foil, Radial Environmental Compliance All KEMET pulse capacitors are RoHS Compliant. Table 1 – Ratings & Part Number Reference Maximum Dimensions in mm VDC VAC Cap Value (µF) T H 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 100 100 100 100 100 100 100 100 100 100 100 100 100 250 250 250 250 250 250 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 63 63 63 63 63 63 63 63 63 63 63 63 63 160 160 160 160 160 160 0.00010 0.00015 0.00022 0.00033 0.00047 0.00068 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.020 0.022 0.00010 0.00015 0.00022 0.00033 0.00047 0.00068 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.00010 0.00015 0.00022 0.00033 0.00047 0.00068 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 5.5 6.5 6.5 6.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 5.5 5.5 6.5 6.5 4.5 4.5 4.5 4.5 4.5 4.5 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 7.0 8.0 8.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 7.0 7.0 8.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 VDC VAC Cap Value (µF) T (mm) H (mm) L Lead Spacing (S) dV/ dt (V/ µs) Size Code (New/ Legacy) KEMET Part Number Legacy Part Number 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 JH/J11 JH/J11 JH/J11 JH/J11 JH/J11 JH/J11 JH/J11 JH/J11 JH/J11 JH/J11 JH/J11 JH/J11 JK/J12 JR/J13 JR/J13 JR/J13 JH/J11 JH/J11 JH/J11 JH/J11 JH/J11 JH/J11 JH/J11 JH/J11 JH/J11 JK/J12 JK/J12 JR/J13 JR/J13 JH/J11 JH/J11 JH/J11 JH/J11 JH/J11 JH/J11 F411JH101(3)063(2) F411JH151(3)063(2) F411JH221(3)063(2) F411JH331(3)063(2) F411JH471(3)063(2) F411JH681(3)063(2) F411JH102(3)063(2) F411JH152(3)063(2) F411JH222(3)063(2) F411JH332(3)063(2) F411JH472(3)063(2) F411JH682(3)063(2) F411JK103(3)063(2) F411JR153(3)063(2) F411JR203(3)063(2) F411JR223(3)063(2) F411JH101(3)100(2) F411JH151(3)100(2) F411JH221(3)100(2) F411JH331(3)100(2) F411JH471(3)100(2) F411JH681(3)100(2) F411JH102(3)100(2) F411JH152(3)100(2) F411JH222(3)100(2) F411JK332(3)100(2) F411JK472(3)100(2) F411JR682(3)100(2) F411JR103(3)100(2) F411JH101(3)250(2) F411JH151(3)250(2) F411JH221(3)250(2) F411JH331(3)250(2) F411JH471(3)250(2) F411JH681(3)250(2) PFR5101(1)63J11(2) PFR5151(1)63J11(2) PFR5221(1)63J11(2) PFR5331(1)63J11(2) PFR5471(1)63J11(2) PFR5681(1)63J11(2) PFR5102(1)63J11(2) PFR5152(1)63J11(2) PFR5222(1)63J11(2) PFR5332(1)63J11(2) PFR5472(1)63J11(2) PFR5682(1)63J11(2) PFR5103(1)63J12(2) PFR5153(1)63J13(2) PFR5203(1)63J13(2) PFR5223(1)63J13(2) PFR5101(1)100J11(2) PFR5151(1)100J11(2) PFR5221(1)100J11(2) PFR5331(1)100J11(2) PFR5471(1)100J11(2) PFR5681(1)100J11(2) PFR5102(1)100J11(2) PFR5152(1)100J11(2) PFR5222(1)100J11(2) PFR5332(1)100J12(2) PFR5472(1)100J12(2) PFR5682(1)100J13(2) PFR5103(1)100J13(2) PFR5101(1)250J11(2) PFR5151(1)250J11(2) PFR5221(1)250J11(2) PFR5331(1)250J11(2) PFR5471(1)250J11(2) PFR5681(1)250J11(2) L (mm) Lead Spacing (S) dV/dt (V/µs) Size Code (New/Legacy) KEMET Part Number Legacy Part Number (1) F = ±1%, G = ±2%, H = ±2.5%, J = ±5%, K = ±10% for Legacy Part Number. (2) Insert lead and packaging code. See table for available options. (3) F = ±1%, G = ±2%, R = ±2.5%, J = ±5%, K = ±10% for New Kemet Part Number. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3036_PFR • 8/14/2023 5 Film Capacitors – General Purpose, Pulse and DC Transient Suppression PFR Polypropylene Film/Foil, Radial Table 1 – Ratings & Part Number Reference cont. Maximum Dimensions in mm VDC VAC Cap Value (µF) T H L Lead Spacing (S) dV/ dt (V/ µs) Size Code (New/ Legacy) KEMET Part Number Legacy Part Number 250 250 250 250 250 250 400 400 400 400 400 400 400 400 400 400 400 400 630 630 630 630 630 630 630 630 630 630 630 1000 1000 1000 1000 1000 1000 1000 160 160 160 160 160 160 220 220 220 220 220 220 220 220 220 220 220 220 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.00010 0.00015 0.00022 0.00033 0.00047 0.00068 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.00010 0.00015 0.00022 0.00033 0.00047 0.00068 0.0010 0.0015 0.0022 0.0033 0.0047 0.00010 0.00015 0.00022 0.00033 0.00047 0.00068 0.0010 4.5 4.5 4.5 5.5 6.5 6.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 5.5 6.5 6.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 5.5 6.5 6.5 4.5 4.5 4.5 5.5 5.5 5.5 6.5 6.0 6.0 6.0 7.0 8.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 7.0 8.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 7.0 8.0 8.0 6.0 6.0 6.0 7.0 7.0 7.0 8.0 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 JH/J11 JH/J11 JH/J11 JK/J12 JR/J13 JR/J13 JH/J11 JH/J11 JH/J11 JH/J11 JH/J11 JH/J11 JH/J11 JH/J11 JH/J11 JK/J12 JR/J13 JR/J13 JH/J11 JH/J11 JH/J11 JH/J11 JH/J11 JH/J11 JH/J11 JH/J11 JK/J12 JR/J13 JR/J13 JH/J11 JH/J11 JH/J11 JK/J12 JK/J12 JK/J12 JR/J13 F411JH102(3)250(2) F411JH152(3)250(2) F411JH222(3)250(2) F411JK332(3)250(2) F411JR472(3)250(2) F411JR682(3)250(2) F411JH101(3)400(2) F411JH151(3)400(2) F411JH221(3)400(2) F411JH331(3)400(2) F411JH471(3)400(2) F411JH681(3)400(2) F411JH102(3)400(2) F411JH152(3)400(2) F411JH222(3)400(2) F411JK332(3)400(2) F411JR472(3)400(2) F411JR682(3)400(2) F411JH101(3)630(2) F411JH151(3)630(2) F411JH221(3)630(2) F411JH331(3)630(2) F411JH471(3)630(2) F411JH681(3)630(2) F411JH102(3)630(2) F411JH152(3)630(2) F411JK222(3)630(2) F411JR332(3)630(2) F411JR472(3)630(2) F411JH101(3)1K0(2) F411JH151(3)1K0(2) F411JH221(3)1K0(2) F411JK331(3)1K0(2) F411JK471(3)1K0(2) F411JK681(3)1K0(2) F411JR102(3)1K0(2) PFR5102(1)250J11(2) PFR5152(1)250J11(2) PFR5222(1)250J11(2) PFR5332(1)250J12(2) PFR5472(1)250J13(2) PFR5682(1)250J13(2) PFR5101(1)400J11(2) PFR5151(1)400J11(2) PFR5221(1)400J11(2) PFR5331(1)400J11(2) PFR5471(1)400J11(2) PFR5681(1)400J11(2) PFR5102(1)400J11(2) PFR5152(1)400J11(2) PFR5222(1)400J11(2) PFR5332(1)400J12(2) PFR5472(1)400J13(2) PFR5682(1)400J13(2) PFR5101(1)630J11(2) PFR5151(1)630J11(2) PFR5221(1)630J11(2) PFR5331(1)630J11(2) PFR5471(1)630J11(2) PFR5681(1)630J11(2) PFR5102(1)630J11(2) PFR5152(1)630J11(2) PFR5222(1)630J12(2) PFR5332(1)630J13(2) PFR5472(1)630J13(2) PFR5101(1)1000J11(2) PFR5151(1)1000J11(2) PFR5221(1)1000J11(2) PFR5331(1)1000J12(2) PFR5471(1)1000J12(2) PFR5681(1)1000J12(2) PFR5102(1)1000J13(2) VDC VAC Cap Value (µF) T (mm) H (mm) L (mm) Lead Spacing (S) dV/dt (V/µs) Size Code (New/Legacy) KEMET Part Number Legacy Part Number (1) F = ±1%, G = ±2%, H = ±2.5%, J = ±5%, K = ±10% for Legacy Part Number. (2) Insert lead and packaging code. See table for available options. (3) F = ±1%, G = ±2%, R = ±2.5%, J = ±5%, K = ±10% for New Kemet Part Number. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3036_PFR • 8/14/2023 6 Film Capacitors – General Purpose, Pulse and DC Transient Suppression PFR Polypropylene Film/Foil, Radial Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221ºC for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170ºC). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm), and great care has to be taken during soldering. The recommended solder profiles from KEMET should be used. Please consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. Please see Figure 1. Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the above the recommended limits may result to degradation or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through-hole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle. Wave Soldering Recommendations Manual Soldering Recommendations 300 Following is the recommendation for manual soldering with a soldering iron. 2+3s max 260°C 250 First wave Temperature (°C) Recommended Soldering Temperature Soldering iron bit temperature (deg C) 400 350 300 Second wave 200 ΔT 15 mm ≤ 15 mm > 15 mm Polyester 130°C 130°C 130°C 270°C 270°C Polypropylene 100°C 110°C 130°C 260°C 270°C Paper 130°C 130°C 140°C 270°C 270°C Polyphenylene Sulphide 150°C 150°C 160°C 270°C 270°C 2. The maximum temperature measured inside the capacitor: Set the temperature so that inside the element the maximum temperature is below the limit: Dielectric Film Material Maximum temperature measured inside the element Polyester 160°C Polypropylene 110°C Paper 160°C Polyphenylene Sulphide 160°C Temperature monitored inside the capacitor. Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as in normal flow soldering without touching the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected components, and pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document, however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than in double wave flow soldering, and great care must be taken so that the parts are not overheated. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3036_PFR • 8/14/2023 8 Double-sided Metallized Polyester Film Film Capacitors – General Purpose, Pulse and DC Transient Suppression PFR Polypropylene Film/Foil, Radial Polypropylene Film Dielectric Double-sided Metallized Polypropylene Polyester Carrier Film Dielectric Film Double-sided Metallized Polyester Carrier Film Construction Molded Plastic Case Metal Foil (Fourth Layer) 1 Section Polypropylene Film Dielectric Metal Contact Layer 3 Sections Cross Section Molded Plastic Self-Extinguishing Case Resin 2 Sections Polypropylene Film (Third Layer) Margin Double-sided Metallized Polyester Carrier Film Single-sided Metallized Polypropylene Detailed Film Double-sided Metallized Polyester Carrier Film Polypropylene Film Dielectric Metal Foil (Second Layer) Polypropylene FilmSingle-sided Metallized (First Layer) Polypropylene Film Margin Metal Contact 4 Sections Layer Margin Leads Polypropylene Film/Foil Winding Scheme Metal Foil Single-sided Metallized Polypropylene Film Metal Foil Polypropylene Film Dielectric Polypropylene Film Dielectric 1 Section 2 Sections AXIAL - Polypropylene Film/Foil Polypropylene Film Dielectric Single-sided Metallized Polypropylene Film Polypropylene Film Dielectric Metal Foil 1 Section 2 Sections © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com ingle-sided Metallized Polyester Film AXIAL - Double-sided Metallized Polyester Film F3036_PFR • 8/14/2023 9 Film Capacitors – General Purpose, Pulse and DC Transient Suppression PFR Polypropylene Film/Foil, Radial Marking FRONT TOP Manufacturer’s Logo Series Capacitance Rated Voltage Tolerance Packaging Quantities KEMET Legacy Size Code Size Code JF JJ JL JQ JT JU JH JK JR J01 J02 J03 J04 J05 J06 J11 J12 J13 Lead Spacing Thickness (mm) Height (mm) Length (mm) Bulk Short Leads Bulk Long Leads Standard Reel ø 360 mm 5 2.5 3.5 4.5 5 6 7.2 4.5 5.5 6.5 6.5 8 9 10 11 13 6 7 8 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 2,000 2,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 2,000 2,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 2,500 2,000 1,500 1,300 1,000 800 1,500 1,200 900 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Large Reel Ammo ø 500 mm 5,000 4,000 3,000 2,600 2,000 1,600 3,000 2,400 1,800 3,000 2,000 1,700 1,500 1,200 – 1,700 1,300 1,100 F3036_PFR • 8/14/2023 10 Film Capacitors – General Purpose, Pulse and DC Transient Suppression PFR Polypropylene Film/Foil, Radial Lead Taping & Packaging (IEC 60286–2) Lead Spacing 5 mm Lead Spacing 7.5 mm 0 0 Lead Spacing 22.5 – 27.5 mm Lead Spacing 10 – 15mm 0 0 Formed Leads from 10 and 15 mm to 7.5 mm 0 Taping Specification Standard IEC 60286-2 Dimensions in mm Lead Spacing +0.6/−0.1 F 5 7.5 Formed 7.5 10 15 22.5 27.5 F ±0.5 W 18 18 18 18 18 18 18 18+1/−0.5 Minimum W0 5 5 5 5 5 5 5 Position of Sprocket Hole ±0.5 W1 9 9 9 9 9 9 9 9+0.75/−0.5 Distance Between Tapes Maximum W2 3 3 3 3 3 3 3 3 Sprocket Hole Diameter ±0.2 D0 4 4 4 4 4 4 4 4 Feed Hole Lead Spacing ±0.3 P0 (1) 12.7 12.7 12.7 (4) 12.7 12.7 12.7 12.7 12.7 Distance Lead – Feed Hole ±0.7 P1 3.85 3.75 3.75 7.7 5.2 5.3 5.3 P1 Deviation Tape – Plane Maximum Δ p 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 Lateral Deviation Maximum Δ h 2 2 2 2 2 2 2 2 0.7 0.9 Maximum 0.9 Maximum 0.9 Maximum 18.5±0.5 18.5±0.5 18.0+2/−0 58 58 58 Maximum Carrier Tape Width Hold-down Tape Width Total Thickness Sprocket Hole/Cap Body Sprocket Hole/ Top of Cap Body ±0.2 t Nominal H0 (2) Maximum H1 (3) 0.7 0.7 0.7 18.5±0.5 18.5±0.5 18.5±0.5 32 (1) Maximum cumulative feed hole error, 1 mm per 20 parts (2) 16.5 mm available on request © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 31 43 0.7 18.5±0.5 18.5±0.5 43 43 (3) Depending on case size (4) 15 mm available on request F3036_PFR • 8/14/2023 11 Film Capacitors – General Purpose, Pulse and DC Transient Suppression PFR Polypropylene Film/Foil, Radial Lead Taping & Packaging (IEC 60286-2) cont. Ammo Specifications Dimensions (mm) Series R4x, R4x+R, R7x, RSB F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx, SMR & PFR H W T 360 340 59 330 330 50 H T W Reel Specifications Dimensions (mm) Series R4x, R4x+R, R7x, RSB F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx, SMR & PFR D H W 355 500 30 25 55 (Max) 360 500 30 46 (Max) D H W Manufacturing Date Code (IEC–60062) Y = Year, Z = Month Year 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 Code A B C D E F H J K L M N P R S T U V W X A Month January February March April May June July August September October November December Code 1 2 3 4 5 6 7 8 9 O N D © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3036_PFR • 8/14/2023 12 Film Capacitors – General Purpose, Pulse and DC Transient Suppression PFR Polypropylene Film/Foil, Radial KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer YAGEO Corporation and its affi liates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space fl ight. All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. Additional information about production site flexibility can be found KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3036_PFR • 8/14/2023 13