PHA226MKP3370QE4

Hybrid Axial Capacitors PHA226, +150°C, Hybrid Axial, AEC-Q200 Overview Applications KEMET’s PHA226 is a conductive polymer hybrid capacitor with outstanding electrical performance. The device has a polarized all-welded design, tinned copper wire leads, and a negative pole connected to the case. The PHA226 winding is housed in a cylindrical aluminum can with a high purity aluminum lid and high-quality rubber gasket. Low ESR is conditioned by a highly conductive polymer (PEDOT/PSS) and an all-welded design. The polymer system creates an electrical pathway between the anodic oxide layer and the cathode through a mechanical separator - paper. The PHA226 winding is impregnated with liquid electrolyte that results to self-healing features of the capacitor. Thanks to its mechanical robustness, the PHA226 is suitable for use in mobile, automotive and aircraft installations with operation up to +150°C.  KEMET’s PHA226 is a series of high performance axial hybrid capacitors. It is designed for automotive applications with extremely high demands. Benefits • More than 10,000 hours at +125°C • High temperature capability up to 150°C • Extremely high ripple current • Up to 32 A rms, continuous load at case 105°C • High vibration resistance up to 30 g 22 h/axis • Polarized all-welded design • Self-healing behaviours • Outstanding electrical performance Part Number System PHA226 M KP 337 R Q E4 Series Rated Voltage (VDC) Size Code Capacitance Code (μF) Version Capacitance Tolerance Packaging Hybrid Axial Capacitor M = 63 See Dimension Table The last two digits represent significant figures. The first digit indicates the total number digits 0 = Standard Q = −10 +30% E4 = Tray Built Into Tomorrow © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com A4110_PHA226 • 8/8/2023 1 Hybrid Axial Capacitors – PHA226, +150°C, Hybrid Axial, AEC-Q200 Performance Characteristics Item Performance Characteristics 370 – 560 μF Capacitance Range 63 VDC Rated Voltage Operating Temperature −40 to +150°C Capacitance Tolerance −10/+30%, at 100 Hz/+20°C Surge Voltage High Temperature Storage 1.15 x VR After storage for 1,000 hours at +150°C with no voltage applied and then being stabilized at +20°C, capacitors shall meet the limits specified in Endurance. I = 0.005 CV (μA) Leakage Current Vibration Test Specifications C = rated capacitance (µF), V = rated voltage (VDC). Procedure Requirements 1.5 mm displacement amplitude or 30 g maximum acceleration. Vibration applied for three 22-hour sessions at 10 – 2,000 Hz (capacitor clamped by body). No leakage of electrolyte or other visible damage. Deviations in capacitance from initial measurements must not exceed: Δ C/C < 5% AEC–Q200; IEC 60384–4 long life grade 40/150/56 Standards Compensation Factor of Ripple Current (RC) vs. Frequency Frequency 0.1 kHz 0.2 kHz 1 kHz 5 kHz 10 kHz 20 kHz 40 kHz 100 kHz Coefficient 0.20 0.30 0.55 0.85 0.90 0.95 1 1 Test Method & Performance Endurance Life Test Conditions Performance Temperature +150°C Test Duration 2,000 hours Voltage Performance The sum of DC voltage must not exceed the rated voltage of the capacitor The following specifications will be satisfied when the capacitor is tested at +20°C: Capacitance Change Equivalent Series Resistance Leakage Current Within 15% of initial value (within 10% at 1,000 hour test) ≤ 3x specified limit* (≤ 2x at 1,000 hour test) Does not exceed leakage current limit *ESR measured at 100 kHz +20°C © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com A4110_PHA226 • 8/8/2023 2 Hybrid Axial Capacitors – PHA226, +150°C, Hybrid Axial, AEC-Q200 Ordering Options Table Packaging Kind Lead and Packaging Code Lead Length (mm) Standard Packaging Option Tray 40 ±2 E4 Dimensions – Millimeters END VIEW (+) SIDE VIEW LL D LL d L L1 Length to Lead Bend Size Code KP LL LP D L Dimensions in mm L1 ±0.5 ±1 Minimum ±0.03 16.2 18.2 18.2 34.7 26.7 34.7 41 33 41 1.0 1.0 1.0 d LL b±2 Box 40 40 40 Approximate Weight Grams 11 13 20 Note: L1 is KEMET's recommendation for minimum distance between symmetrical Lead bend. Available only for Customer specific part numbers. Lead bend dimensions must be specified and confirmed per article. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com A4110_PHA226 • 8/8/2023 3 Hybrid Axial Capacitors – PHA226, +150°C, Hybrid Axial, AEC-Q200 Shelf Life The capacitance, ESR and impedance of a capacitor will not change significantly after extended storage periods at temperatures up to 40°C, however the leakage current will very slowly increase. After storage for 10 years at +40°C or 1,000 hours at maximum rated temperature with no voltage applied and then being stabilized at +20°C, capacitors shall meet the limits specified in Endurance. Environmental Compliance All Part Numbers in this datasheet are Reach and RoHS compliant and Halogen-Free. As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental effects of both our capacitors and their production. In Europe (RoHS Directive) and in some other geographical areas such as China, legislation has been put in place to prevent the use of some hazardous materials, such as lead (Pb), in electronic equipment. All products in this catalog are produced to help our customers' obligations to guarantee their products and fulfill these legislative requirements. The only material of concern in our products has been lead (Pb), which has been removed from all designs to fulfill the requirement of containing less than 0.1% of lead in any homogeneous material. KEMET will closely follow any changes in legislation world wide and makes any necessary changes in its products, whenever needed. Some customer segments such as medical, military, and automotive electronics may still require the use of lead in electrode coatings. To clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels for RoHS compatible capacitors. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com A4110_PHA226 • 8/8/2023 4 Hybrid Axial Capacitors – PHA226, +150°C, Hybrid Axial, AEC-Q200 Table 1 – Ratings & Part Number Reference CR DxL IRACa TC = 70°C 100 kHz µF mm A RMS 370 380 560 16x35 18x27 18x35 IRACa TC = 105°C 100 kHz IRACb TC = 125°C 100 kHz IRACb TC = 145°C 100 kHz ESR (Maximum) 20°C 100 Hz ESR (Maximum) −40 to 150°C 100 kHz A RMS A RMS A RMS mOhm mOhm 10.9 10.5 11.4 145 147 92 6.1 7.1 6.0 42.0 40.5 44.0 30.5 30.0 32.0 24.2 23.5 25.4 63 VDC (UR) Part Number PHA226MKP3370QE4 PHA226MLL3380QE4* PHA226MLP3560QE4* a 3,000 hours b 2,000 hours * Available upon request Operational Life Operational life (Lop) at case temperature Tc and ripple current IAC. 3.5 3 IAC/IRAC (145oC) 2.5 2 1.5 1 0 500h 0.5 50 60 70 80 90 100 110 Case Temperature Tc 120 130 140 150 160 (oC) © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com A4110_PHA226 • 8/8/2023 5 Hybrid Axial Capacitors – PHA226, +150°C, Hybrid Axial, AEC-Q200 Marking KEMET Logo, Polarity Indication Part Number Batch Number prefixed by Week and Year of Manufacture Rated Capacitance, Rated Voltage Construction Tinned Copper Wire Lead (-) Aluminum Can Welded Terminal Tab (+) Tinned Copper Wire Lead (+) Detailed Cross Section Rubber Gasket High Purity Aluminum Lid High Purity Welded Aluminum Lid Terminal Tab (+) Margin Aluminum Can Paper Spacer Impregnated with Electrolyte and Coated with Polymer Cathode Aluminum Foil, Coated with Polymer Tinned Copper Paper Spacer Impregnated Wire Lead (+) with Electrolyte and Coated with Polymer Anode Aluminum Foil, Etched, Covered with Aluminum Oxide Rubber Gasket and Coated with Polymer © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Welded Terminal Tab (−) Tinned Copper Wire Lead (−) A4110_PHA226 • 8/8/2023 6 Hybrid Axial Capacitors – PHA226, +150°C, Hybrid Axial, AEC-Q200 Construction Data The manufacturing process begins with the anode foil being electrochemically etched to increase the surface area and then “formed” to produce the aluminum oxide layer. Both the anode and cathode foils are then interleaved with absorbent paper and wound into a cylinder. During the winding process, aluminum tabs are attached to each foil to provide the electrical contact. The winding is assembled to the capacitor Al-can and to the Al-lid. The can is filled with electrolyte and the winding is impregnated during a vacuum treatment. The capacitor is sealed. Throughout the process, all materials inside the housing must be maintained at the highest purity and be compatible with the electrolyte. Coating with polymer is applied during manufacturing process to achieve enhanced performance. Each capacitor is aged and tested before being packed. The purpose of aging is to repair any damage in the oxide layer and thus reduce the leakage current to a very low level. Aging is carried out at elevated temperature and is accomplished by applying voltage to the device while carefully controlling the supply current. The process takes between 2 and 20 hours, depending on voltage rating. Damage to the oxide layer can occur due to a variety of reasons: • Slitting of the anode foil after forming • Attaching the tabs to the anode foil • Minor mechanical damage caused during winding The following tests are applied for each individual capacitor. Electrical: • Leakage current • Capacitance • ESR • Tan Delta Mechanical/Visual: • Pull strength test of wire terminals • Print detail • Box labels • Packaging, including packed quantity © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Anode foil Foil tab Tissues Cathode foil Etching Forming Winding/Coating Assembly Filling Impregnation Sealing Aging Testing Labeling Packing A4110_PHA226 • 8/8/2023 7 Hybrid Axial Capacitors – PHA226, +150°C, Hybrid Axial, AEC-Q200 KEMET Electronics Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer YAGEO Corporation and its affiliates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space flight. All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. KEMET requires its products to be packaged and shipped on pallets. This is because KEMET’s products are specifically designed to be packed onto pallets during shipment. If for any reason, the products are removed from pallets by the shipping party and shipped to the end customer, then additional external protection is required. In this instance, an external box with two carton layers and an upwards orientation sticker must be used by the shipping party, with the empty space filled with filling material, and afterwards sealing the box. If this packing and packaging guideline is not followed by the shipping party, the shipping party, and not KEMET, will be held responsible for any packaging, packing and/or product damages upon delivery of the products to the end customer. KEMET hereby disclaims any liability for damages to the products or otherwise that have been, or threaten to be, inflicted, result from or are in any way related to the packaging, packing or damage by the shipping party in contravention of the packing and packaging guidelines herein. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com A4110_PHA226 • 8/8/2023 8