Class X2
Metallized Polyester Film EMI Suppression Capacitors
PHE820E, Class X2, 300 VAC
Overview
Applications
Series winding of metallized polyester, encapsulated in
self-extinguishing material meeting the requirements
of UL 94 V–0.
Typical applications include worldwide use in
electromagnetic interference suppression in
all X2 and across-the-line applications.
Benefits
• Approvals: ENEC, UL, cUL
• Rated voltage: 300 VAC 50/60 Hz
• Capacitance range: 0.01 – 2.2 µF
• Lead spacing: 15.0 – 37.5 mm
• Capacitance tolerance: ±20%, ±10%, ±5% on request
• Climatic category: 40/100/56, IEC 60068–1
• Tape and reel in accordance with IEC 60286–2
• RoHS Compliant and lead-free terminations
• Operating temperature range of −40°C to +100°C
• 100% screening factory test at 2,150 VDC
Customer Part Number
PHE820
E
B
5100
M
R17
Series
Rated Voltage (VAC)
Lead Spacing (mm)
Capacitance Code (pF)
Capacitance
Tolerance
Packaging
X2, Metallized
Polyester
E = 300
B = 15.0
D = 22.5
F = 27.5
R = 37.5
The last three digits
represent significant
figures. The first digit
specifies the total
number of digits.
J = ±5%
K = ±10%
M = ±20%
See Ordering
Options Table
KEMET Internal Part Number
F
720
B
D
103
M
300
A
Capacitor Class
Series
Lead Spacing
(mm)
Size Code
Capacitance
Code (pF)
Capacitance
Tolerance
Rated Voltage
(VAC)
Packaging
F = Film
X2, Metallized
Polyester
B = 15.0
D = 22.5
F = 27.5
R = 37.5
See Dimension
Table
First two digits
represent
significant
figures. Third
digit specifies
number of
zeros.
J = ±5%
K = ±10%
M = ±20%
300 = 300
See Ordering
Options Table
Built Into Tomorrow
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3010_PHE820E_X2_300 • 11/10/2021
1
Class X2
Metallized Polyester Film EMI Suppression Capacitors – PHE820E, Class X2, 300 VAC
Ordering Options Table
Lead Spacing
Nominal
(mm)
Type of Leads and Packaging
Lead Length
(mm)
KEMET
Legacy
Lead and Lead and
Packaging Packaging
Code
Code
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
Bulk (Bag) – Long Leads
15
Native 15
formed to 7.5
6 +0/−1
17 +0/−1
C
A
R06
R17
Other Lead and Packaging Options
Bulk (Bag) – Max Length
Leads
Tape & Reel (Standard Reel)
30 +5/−0
ALW0L
R30
H0= 18.5 ±0.5
L
R17T0
Tape & Reel (Large Reel)
H0= 18.5 ±0.5
P
R17T1
Ammo Pack
Tape & Reel (Standard Reel)
H0= 16.5 ±0.5
H0= 16.5 ±0.5
XLAF1
XLTF1
R25XA
R25X2
6 +0/−1
C
R06L2(1)
H0= 18.5 ±0.5
H0= 18.5 ±0.5
6 +0/−1
L
P
Z
R17T0
R17T1
R06L2(1)
6 +0/−1
C
R06L2(1)
H0= 18.5 ±0.5
6 +0/−1
P
Z
R17T1
R06L2(1)
6 +0/−1
C
R06L2(1)
6 +0/−1
Z
R06L2(1)
Standard Lead and Packaging Options
Bulk (Tray) – Short Leads
22.5
Other Lead and Packaging Options
Tape & Reel (Standard Reel)
Tape & Reel (Large Reel)
Pizza Pack
Standard Lead and Packaging Options
Bulk (Tray) – Short Leads
27.5
Other Lead and Packaging Options
Tape & Reel (Large Reel)
Pizza Pack
Standard Lead and Packaging Options
37.5
Bulk (Tray) – Short Leads
Other Lead and Packaging Options
Pizza Pack
(1) Please specify Bulk (Tray) or Pizza Packaging.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3010_PHE820E_X2_300 • 11/10/2021
2
Class X2
Metallized Polyester Film EMI Suppression Capacitors – PHE820E, Class X2, 300 VAC
Dimensions – Millimeters
FRONT VIEW
SIDE VIEW
L
T
H
S
LL
F
KEMET
Internal
Size Code
Customer
Size
Code
BD
BE
BL
BJ
BQ
DD
DH
DM
DT
FE
FG
FM
FR
RK
RM
B04
B05
B06
B10
B11
D13
D14
D15
D16
F11
F12
F13
F14
R02
R03
S
T
H
L
F
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
15.0
15.0
15.0
15.0
15.0
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
37.5
37.5
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
5.5
5.5
7.5
6.5
8.5
6.5
8.0
9.0
11.0
10.5
11.5
14.5
17.5
16.5
19.0
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
10.5
12.5
14.5
12.5
16.0
14.5
16.0
18.5
21.5
20.5
22.5
24.5
28.0
32.0
36.0
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
18.0
18.0
18.0
18.0
18.0
26.0
26.0
26.0
26.0
31.5
31.5
31.5
31.5
41.0
41.0
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1.0
1.0
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
Note: See Ordering Options Table for lead length (LL) options.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3010_PHE820E_X2_300 • 11/10/2021
3
Class X2
Metallized Polyester Film EMI Suppression Capacitors – PHE820E, Class X2, 300 VAC
Performance Characteristics
Rated Voltage
Capacitance Range
Capacitance Tolerance
Temperature Range
Climatic Category
Approvals
Dissipation Factor
Test Voltage Between Terminals
300 VAC 50/60 Hz
0.01 – 2.2 µF
±20%, ±10%, ±5% on request
−40ºC to +100°C
40/100/56
ENEC, UL, cUL
Maximum Values at +23°C
1 kHz
1.0%
The 100% screening factory test is carried out at 2,150 VDC. The
voltage level is selected to meet the requirements in applicable
equipment standards. All electrical characteristics are checked
after the test. It is not permitted to repeat this test as there is a
risk to damage the capacitor. KEMET is not liable in such case
for any failures.
Minimum Values Between Terminals
Insulation Resistance
In DC Applications
C ≤ 0.33 µF
≥ 30,000 MΩ
C > 0.33 µF
≥ 10,000 MΩ • µF
Recommended voltage ≤ 760 VDC
Environmental Test Data
Test
IEC Publication
Procedure
Endurance
EN/IEC 60384–14
Vibration
IEC 60068–2–6 Test Fc
3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s2
Bump
IEC 60068–2–29 Test Eb
1,000 bumps at 390 m/s2
Change of Temperature
IEC 60068–2–14 Test Na
Upper and lower rated temperature 5 cycles
Active Flammability
IEC 60384–14
VR + 20 surge pulses at 2.5 kV (pulse every 5 seconds)
Passive Flammability
IEC 60384–14
IEC 60384–1, IEC 60695–11–5 Needle-flame test
Damp Heat Steady State
IEC 60068–2–78 Test Cab
1.25 x VR VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1
second, 1,000 hours at upper rated temperature
+40°C and 93% RH, 56 days
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3010_PHE820E_X2_300 • 11/10/2021
4
Class X2
Metallized Polyester Film EMI Suppression Capacitors – PHE820E, Class X2, 300 VAC
Approvals
Mark
Specification
File Number
EN/IEC 60384–14
SE/0140–12E
UL 1414 (up to 1 μF, 85°C, 250
VAC)
CSA – C22.2 No. 1
(up to 1 μF, 85°C, 250 VAC)
E73869
E73869
UL 1283 (310 VAC)
E100117
CSA – C22.2 No. 8 (310 VAC)
E100117
Environmental Compliance
All KEMET EMI capacitors are RoHS Compliant.
Table 1 – Ratings & Part Number Reference
Max Dimensions in
mm
Capacitance
Value (µF)
Box Code
(KEMET/
Legacy)
Lead
Spacing (S)
fo
(MHz)
dV/dt
(V/
µs)
KEMET
Part Number
Legacy
Part Number
T
H
L
0.010
0.015
0.022
0.033
0.047
0.068
0.10
0.10
0.15
0.22
0.33
0.33
0.47
0.68
1.0
1.5
2.2
BD/B04
BD/B04
BD/B04
BE/B05
BJ/B10
BL/B06
BQ/B11
DD/D13
DH/D14
DM/D15
DT/D16
FE/F11
FG/F12
FM/F13
FR/F14
RK/R02
RM/R03
5.5
5.5
5.5
5.5
6.5
7.5
8.5
6.5
8.0
9.0
11.0
10.5
11.5
14.5
17.5
16.5
19.0
10.5
10.5
10.5
12.5
12.5
14.5
16.0
14.5
16.0
18.5
21.5
20.5
22.5
24.5
28.0
32.0
36.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
26.0
26.0
26.0
26.0
31.5
31.5
31.5
31.5
41.0
41.0
15
15
15
15
15
15
15
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
37.5
37.5
13
11
9.0
7.5
6.5
5.5
4.5
4.5
3.9
2.7
2.5
2.4
1.9
1.6
1.3
0.75
0.65
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
F720BD103(1)300(2)
F720BD153(1)300(2)
F720BD223(1)300(2)
F720BE333(1)300(2)
F720BJ473(1)300(2)
F720BL683(1)300(2)
F720BQ104(1)300(2)
F720DD104(1)300(2)
F720DH154(1)300(2)
F720DM224(1)300(2)
F720DT334(1)300(2)
F720FE334(1)300(2)
F720FG474(1)300(2)
F720FM684(1)300(2)
F720FR105(1)300(2)
F720RK155(1)300(2)
F720RM225(1)300(2)
PHE820EB5100(1)(2)
PHE820EB5150(1)(2)
PHE820EB5220(1)(2)
PHE820EB5330(1)(2)
PHE820EB5470(1)(2)
PHE820EB5680(1)(2)
PHE820EB6100(1)(2)
PHE820ED6100(1)(2)
PHE820ED6150(1)(2)
PHE820ED6220(1)(2)
PHE820ED6330(1)(2)
PHE820EF6330(1)(2)
PHE820EF6470(1)(2)
PHE820EF6680(1)(2)
PHE820EF7100(1)(2)
PHE820ER7150(1)(2)
PHE820ER7220(1)(2)
Capacitance
Value (µF)
Box Code
(KEMET/Legacy)
T (mm)
H (mm)
L (mm)
Lead Spacing
(S)
fo (MHz)
dV/dt
(V/µs)
KEMET
Part Number
Legacy
Part Number
(1) M = ±20%, K = ±10%, J = ±5% on request.
(2) Insert ordering code for lead type and packaging. See Ordering Options Table for available options.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3010_PHE820E_X2_300 • 11/10/2021
5
Class X2
Metallized Polyester Film EMI Suppression Capacitors – PHE820E, Class X2, 300 VAC
Soldering Process
The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder.
This has increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221°C for the new alloys. As a
result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave
temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170°C).
Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 – 15
mm), and great care has to be taken during soldering. The recommended solder profiles from KEMET should be used. Please
consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760–1 Edition 2 serves as a solid
guideline for successful soldering. Please see Figure 1.
Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the
above the recommended limits may result to degradation or permanent damage to the capacitors.
Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert
through-hole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven,
if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended.
Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle.
Wave Soldering Recommendations
Manual Soldering Recommendations
Following is the recommendation for manual
soldering with a soldering iron.
300
2+3 seconds maximum
260°C
250
Second Wave
First Wave
Recommended Soldering Temperature
Temperature (°C)
200
400
Soldering Iron Bit Temperature (°C)
350
300
∆T<
150°C
Cooling
Preheating
150
ca. 2°C/second
ca. 3.5°C/second typical
ca. 5°C/second
Tpreheat
100
Typical
250
200
50
150
0
100
0
40
80
120
160
200
240
Time (seconds)
50
0
0
1
2
3
4
5
6
7
8
Soldering Time (seconds)
The soldering iron tip temperature should
be set at 350°C (+10°C maximum) with the
soldering duration not to exceed more than 3
seconds.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3010_PHE820E_X2_300 • 11/10/2021
6
Class X2
Metallized Polyester Film EMI Suppression Capacitors – PHE820E, Class X2, 300 VAC
Soldering Process cont.
Wave Soldering Recommendations cont.
1. The table indicates the maximum set-up temperature of the soldering process
Figure 1
Dielectric
Film Material
Maximum Preheat
Temperature
Maximum
Peak Soldering
Temperature
Capacitor Capacitor Capacitor Capacitor Capacitor
Pitch
Pitch
Pitch
Pitch
Pitch
≤ 10 mm = 15 mm > 15 mm ≤ 15 mm > 15 mm
Polyester
130°C
130°C
130°C
270°C
270°C
Polypropylene
100°C
110°C
130°C
260°C
270°C
Paper
130°C
130°C
140°C
270°C
270°C
Polyphenylene
Sulphide
150°C
150°C
160°C
270°C
270°C
2. The maximum temperature measured inside the capacitor:
Set the temperature so that inside the element the maximum temperature is below the limit:
Dielectric Film Material
Maximum temperature
measured inside the element
Polyester
160°C
Polypropylene
110°C
Paper
160°C
Polyphenylene Sulphide
160°C
Temperature monitored inside the capacitor.
Selective Soldering Recommendations
Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole
components to be soldered is preheated and transported over the solder bath as in normal flow soldering without touching
the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten
solder only at the places of the selected components, and pressed against the lower surface of the board to solder the
components.
The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document,
however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of
overheating is greater than in double wave flow soldering, and great care must be taken so that the parts are not overheated.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3010_PHE820E_X2_300 • 11/10/2021
7
Single-sided
Single-sided
Metallized
Metallized
Polypropylene
Polypropylene
Metallized Polyester Film EMI Suppression
Capacitors – PHE820E, Class X2, 300 VAC
Film
Film
Double-sided
Metallized
Polyester
Carrier
Film
Class X2
Polyprop
Film Diel
Construction
3 Sections
3 Sections
4 Sections
Molded Plastic
Case
Single-sided Metallized
Polyester Film
(First Layer)
Detailed Cross Section
Molded Plastic Self-Extinguishing
Case
Resin
Single-sided Metallized
Polyester Film
(Second Layer)
Metallized Impregnated Paper
Metallized Polyphenylene
Margin
Sulfide Film (SMR)
Polyp
Margin
Metal Contact
Layer
Metallized
Impregnated
Paper
Metal Foil
Poly
Film
Metallized PolyphenylMetalFilm
Contact
ene Sulfide
with
Layer
Vacuum-Evaporated
Aluminum Electrodes
Margin
1 Section
1 Section
1 Section
Leads
Single-sided Metallized Polyester Film
Winding Scheme
AXIAL - Polyprop
Single-sided
Metallized
Polyester
Film
Polypropylene
Film Dielectric
Metal Foil
1 Section
1 Section
AXIAL - Single-sided Metallized
Polypropylene Film
AXIAL - Single-sided Metallized
Polyester Film
Single-sided
Metallized
Polypropylene
Film
1 Section
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Doub
Me
Polyes
F
Single-sided
Metallized
Polyester
Film
1 Section
F3010_PHE820E_X2_300 • 11/10/2021
8
Class X2
Metallized Polyester Film EMI Suppression Capacitors – PHE820E, Class X2, 300 VAC
Marking
FRONT
TOP
RIFA
Logo
150nK B N8
Approval
Mark
Series
Rated
Voltage
Capacitance
IEC
Climatic
Category
Capacitance
Tolerance
Approval
Mark
Manufacturing
Date Code
Manufacturing
Plant Code
Manufacturing Date Code (IEC–60062)
Year
Code
Year
Code
Month
Code
Month
Code
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
A
B
C
D
E
F
H
J
K
L
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
M
N
P
R
S
T
U
V
W
X
January
February
March
April
May
June
1
2
3
4
5
6
July
August
September
October
November
December
7
8
9
O
N
D
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3010_PHE820E_X2_300 • 11/10/2021
9
Class X2
Metallized Polyester Film EMI Suppression Capacitors – PHE820E, Class X2, 300 VAC
Packaging Quantities
KEMET Legacy
Bulk
Bulk Standard Large
Standard
Lead Thickness Height Length
Ammo
Size
Size
Short Long
Reel
Reel Pizza
Reel
Spacing
(mm)
(mm) (mm)
Formed
Code
Code
Leads Leads 360 mm 500 mm
Formed
BD
BE
BL
BJ
BQ
BM
BV
BG
BY
BU
B04
B05
B06
B10
B11
B12
B14
B15
B16
B17
DD
DH
DM
DT
DF
DR
DY
DW
D13
D14
D15
D16
D17
D18
D19
D20
FK
FE
FG
FM
FR
FS
FV
FH
FT
FQ
F03
F11
F12
F13
F14
F15
F16
F17
F18
F19
RK
RM
RH
RF
RP
RS
R02
R03
R04
R05
R06
R08
15
5.5
5.5
7.5
6.5
8.5
8
9.5
6
11
13
10.5
12.5
14.5
12.5
16
15
17.5
12
19
12.5
18
18
18
18
18
18
18
18
18
18
1,000
1,000
800
1,000
600
600
500
1,000
450
400
22.5
6.5
8
9
11
7
10.5
15.5
13.5
14.5
16
18.5
21.5
16.5
19
24.5
23
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
234
186
308
253
216
264
176
209
27.5
13.5
10.5
11.5
14.5
17.5
19
21
21
31
27.5
23
20.5
22.5
24.5
28
29
30
12.5
18.5
16
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
171
216
198
153
126
117
108
108
72
81
37.5
16.5
19
15
13
21
28
32
36
26
24
38
43
41
41
41
41
41
41
105
91
119
140
84
54
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
800
800
400
600
400
400
300
800
250
300
600
600
400
500
400
400
350
500
300
250
1,200
1,200
800
1,000
800
800
700
1,000
600
500
550
550
350
450
350
350
250
450
250
200
300
250
250
200
300
200
110
160
600
500
500
400
600
400
250
300
440
352
308
253
396
264
176
209
250
350
300
250
171
216
198
153
126
117
108
108
72
81
570
570
378
480
324
351
297
520
252
216
105
91
119
140
84
54
F3010_PHE820E_X2_300 • 11/10/2021
10
Class X2
Metallized Polyester Film EMI Suppression Capacitors – PHE820E, Class X2, 300 VAC
Lead Taping & Packaging (IEC 60286–2)
Lead Spacing 5 mm
∆p
Lead Spacing 7.5 mm
∆p
∆h
H1
W2
F
H0
P1
∆p
W0 W1
W
W
D0
P1
∆p
∆h
t
P0
∆p
∆h
H1
W0 W1
P1
∆p
∆h
W2
F
H0
D0
P0
Lead Spacing 22.5 – 27.5 mm
Lead Spacing 10 – 15 mm
H1
∆h
W2
F
H0
t
∆p
∆h
H1
W0 W1
P0
∆p
∆h
W2
F
H0
W0 W1
W
D0
P0
P1
∆h
W
D0
t
t
Taping Specification
Dimensions in mm
Lead Spacing
Standard IEC 60286–2
+0.6/−0.1
F
5.0
7.5
10.0
15.0
22.5
27.5
Carrier Tape Width
±0.5
W
18.0
18.0
18.0
18.0
18.0
18.0
Hold-Down Tape Width
±0.3
W0
9.0
9.0
9.0
9.0
9.0
9.0
Position of Sprocket Hole
±0.5
W1
9.0
9.0
9.0
9.0
9.0
9.0
9+0.75/−0.5
Distance Between Tapes
Maximum
W2
3.0
3.0
3.0
3.0
3.0
3.0
3.0
Sprocket Hole Diameter
±0.2
D0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
Feed Hole Lead Spacing
±0.3
P0
12.7
12.7
12.7
12.7
12.7
12.7
12.7
Distance Lead – Feed Hole
±0.7
P1
3.85
3.75
7.7
5.2
7.8
5.3
P1
Deviation Tape – Plane
Maximum
∆p
1.3
1.3
1.3
1.3
1.3
1.3
1.3
Lateral Deviation
Maximum
∆h
2.0
2.0
2.0
2.0
2.0
2.0
2.0
Total Thickness
±0.2
t
0.7
0.7
0.7
0.7
0.9 MAX
0.9 MAX
0.9 MAX
18.5
18.5
18.5
18.5
18.5
18.5
18 +2/−0
Sprocket Hole/Cap Body
Sprocket Hole/Top of Cap Body
Nominal
H0
(1)
(2)
H1(3)
±0.5
32.0
±0.5
31.0
±0.5
43.0
±0.5
43.0
±0.5
58.0
±0.5
58.0
F
18
+1/−0.5
58 MAX
(1) Cumulative lead spacing error.
(2) 16.5 mm available on request.
(3) Depending on case size.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3010_PHE820E_X2_300 • 11/10/2021
11
Class X2
Metallized Polyester Film EMI Suppression Capacitors – PHE820E, Class X2, 300 VAC
Lead Taping & Packaging (IEC 60286–2) cont.
Ammo Specifications
Series
R4x, R4x+R, R7x, RSB
F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx
Dimensions (mm)
H
W
T
360
340
59
330
330
50
H
T
Reel Specifications
Series
R4x, R4x+R, R7x, RSB
F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx
W
Dimensions (mm)
D
H
W
355
500
30
25
55 (Max)
360
500
30
46 (Max)
D
H
W
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3010_PHE820E_X2_300 • 11/10/2021
12
Class X2
Metallized Polyester Film EMI Suppression Capacitors – PHE820E, Class X2, 300 VAC
KEMET Electronics Corporation Sales Offices
For a complete list of our global sales offi ces, please visit www.kemet.com/sales.
Disclaimer
All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes
no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury
or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3010_PHE820E_X2_300 • 11/10/2021
13
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
KEMET:
PHE820EF6330MR06L2 PHE820EF6470MR06L2 PHE820EF6680MR06L2 PHE820EF7100MR06L2
PHE820EB6100KR17 PHE820ER7150MR06L2 PHE820ER7220MR06L2 PHE820EB5100MR17
PHE820EB5150MR17 PHE820EB5220MR17 PHE820EB5330MR17 PHE820EB5470MR17 PHE820EB5680MR17
PHE820EB6100MR17 PHE820ED6100MR06L2 PHE820ED6150MR06L2 PHE820ED6220MR06L2
PHE820ED6330MR06L2 PHE820EB6100MR17T0 PHE820EB5680KR17 PHE820EF6680KR06L2
F720DM224K300C F720DH154K300C
工商网监
湘ICP备2023018690号
