PL-001L-W

Proximity Sensors PL Pyroelectric Infrared Sensors Overview Applications KEMET’s Pyroelectric Infrared Sensors have a low profile design and can be used without a lens to enable miniaturized designs and are ideal to detect human proximity by IR presence. Typical applications include human presence detection sensing for energy saving functions in: • Contact less switching • Office automation equipment • Home appliances • Lighting • Display products • Air-conditioners • TV • PC monitors • Rice cookers • Smart toilets KEMET’s proprietary piezoelectric ceramic material and structural development of the pyroelectric infrared sensor enables human presence detection through solid plastic materials or glass, which allows more mechanical and optical appearance design possibilities of the end product. The sensor can be used without a lens or, to extend the detection range, a proprietary KEMET lens can be used in 3 different colors. Benefits • Reflow capable SMD configuration • Lens not required • A lens can be attached to the sensor • Wide view angle up to ±60 degrees (lensless) • View angle up to ±37/±28 degrees (with lens) • Detection possible through glass or resin • Low power consumption, down in the μA range • Excellent radio wave performance in high-frequency band • Compact and low profile (5.0 x 4.8 x 1.7 mm) Natural Lens White Lens Sensor - Front Sensor - Back Black Lens One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com SE0206_PL • 5/6/2020 1 Proximity Sensors – PL Pyroelectric Infrared Sensors Ordering Information PL- N 823- 01 Series Lens Type Sensor Type Serial Number 823 873 01 02 N = Lens not supported Q = Lens supported1 PL 1 The Lens Type “Q = Lens supported” is not including the lens itself, to be selected and purchased separately, as per below table. PL- 001L- N Series Lens Type Color Type PL 001L BK = Black N = Natural W = White Performance Characteristics Measuring Method Heat source Horizontal angle (°) Sensor Detected Distance (m) (m) −22.5° 3 0° 22.5° 2.5 −45° 45° 2 ⊿5°C ⊿10°C ⊿20°C ⊿25°C 1.5 −67.5° 67.5° 1 0.5 0 −90° 90° Sensor -113 113 ∆T (°C) = Difference between room temperature and heat source temperature -135 135 -158 158 -180 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com SE0206_PL • 5/6/2020 2 Proximity Sensors – PL Pyroelectric Infrared Sensors Performance Characteristics cont. PL-001L-N - Field of View (Unit: m) ±37° ±28° Horizontal View Vertical View PL-001L-N - Projection View Projection View at 5 m Unit: m Sensor Detection Area (P/N: PL-Q873-02) Unit: mm Detecting Performance with Different Materials 1.8 Threshold Output Voltage [VO-p] 1.6 Glass 1.4 Glass (Gorilla®) 1.2 ASB 1.0 Acrylic 0.8 Polycarbonate Can detect 0.6 0.4 0.2 0.0 Cannot detect 5 10 15 20 25 30 35 Detecting Distance [cm] Measuring conditions: Transfer velocity - 1 m/s Heat source size - 170×70 mm (relative to hand) Temperature difference - Δ10°C Each material thickness - 1 mm (clear color) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com SE0206_PL • 5/6/2020 3 Proximity Sensors – PL Pyroelectric Infrared Sensors Dimensions in mm Sensor - Dimensions in mm 5 Sensor - Land Pattern in mm 1.7 (3) (1) (2) 4.2 4.8 1.75 (4) 4.7 4.4 1.2 3.3 (1) 1 pin mark GND (2) Vout (Source) 1.75 4.5 GND (4) (3) 1.2 Sensor - Pin Assignment Pin Number Pin Name 1 GND 2 Vout (Source) 3 Vin (Drain) 4 GND Vin (Drain) 3.3 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com SE0206_PL • 5/6/2020 4 Proximity Sensors – PL Pyroelectric Infrared Sensors Dimensions in mm cont. Lens - Dimensions in mm Lens Area with Crack 6.6 5.6 C0.7 6.0 7.0 6 A 1 A 4R0 2 5 .3 3R0 .5 3 4 2.0 Sensor and Lens Mounting Direction 5.0 2.0 2.0 3.87 1.0 B 4.8 B A−A B−B C Plane of Lens 0. 6 2-Ø Data Code Printing of Sensor Standard Position of Sensor Top View 3.3 PCB Hole Dimension 5.6 Side View 3.3 3.3 3.5 3.3 5.8 3.5 PCB 2-Φ0.8TH © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com SE0206_PL • 5/6/2020 5 Proximity Sensors – PL Pyroelectric Infrared Sensors Environmental Compliance All KEMET Pyroelectric Infrared Sensors are RoHS and REACH Compliant. Article 33(1) of the REACH Regulation states that manufacturers and importers of articles (products) are required to notify their customers of the presence of any Substances of Very High Concern (SVHC) in their products exceeding 0.1% by weight and provide instructions on safe use of the product. KEMET Corporation reports regarding the Article 33(1) of REACH Regulation as follows: 1. Applicable Product: Pyroelectric Infrared Sensors (PL series) 2. Report for the content of REACH SVHC list: The product(s) above contains a substance by more than 0.1wt% per product weight that was published in the 8th update of the REACH SVHC substances (December 19, 2012). 3. Regarding the safety of the pyroelectric infrared sensors (Piezoceramic products): The Piezoceramic that is used in this product becomes ceramic by sintering powder containing PZT as the main ingredient. It is chemically stable, with minimum risks toward the human body or environment within the intended use of the product. Please note that risks could occur in the case of inhalation or accidental oral uptake of powder ceramics. 4. Technical product information on the multilayer piezoelectric actuators (Piezoceramic products): The manufacturing technique of the “piezoceramic products” whose main ingredient is Lead Titanium Zirconium Oxide (PZT) has been established, and there is no alternative material that can exhibit superior performance than PZT at this moment. Please note that the piezoceramic is listed as an exempt on RoHS (2011/65/EU) AnnexIII (7c.1). 5. The responsibility of piezoceramic manufacturers: Piezoceramic manufacturers report information regarding PZT containment in their products to the customers to obey the article 33 of the REACH regulation © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com SE0206_PL • 5/6/2020 6 Proximity Sensors – PL Pyroelectric Infrared Sensors Table 1 – Ratings & Part Number Reference Sensor Part Number Supply Voltage (VDC) Output Voltage1 (mVp-p) Minimum Source Voltage2 (V) Noise3 (mVp-p) Maximum Warm up Time4 (seconds) Maximum PL-N823-01 2.0 ~ 15.0 550 0.3 ~ 0.9 140 30 PL-Q873-02 2.0 ~ 15.0 550 0.3 ~ 0.9 140 30 Part Number Field of View (°) MSL Reflow Temperature ≤ 240°C Operating Temperature (°C) Storage Temperature (°C) Weight (g) PL-N823-01 Horizontal: ±60° Vertical: ±60° 3 −40°C to +70°C −40°C to +85°C 0.1 PL-Q873-02 Horizontal: ±60° Vertical: ±60° 3 −40°C to +70°C −40°C to +85°C 0.1 Difference of temperature with ambient temperature and heat source: 70°C, aperture diameter: Φ10, 1 Hz and AMP: 26 dB Vd = 5 V and Rs = 47 kΩ 3 AMP = 72 dB and Rs = 47 kΩ 4 The warm up time is defined by the time needed for the source voltage to reach a rated value after the sensor’s power supply has been turned on. 1 2 Lens 1 Field of View (°) Operating Temperature (°C) Storage Temperature (°C) Weight (g) Part Number Lens Color Detection Distance1 (m) PL-001L-N Natural 5.0 Horizontal: ±37° Vertical: ±28° −20°C to +60°C −25°C to +75°C 0.07 PL-001L-BK Black 3.5 Horizontal: ±37° Vertical: ±28° −20°C to +60°C −25°C to +75°C 0.07 PL-001L-W White 3.5 Horizontal: ±37° Vertical : ±28° −20°C to +60°C −25°C to +75°C 0.07 Reference data using SS-430L © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com SE0206_PL • 5/6/2020 7 Proximity Sensors – PL Pyroelectric Infrared Sensors Applications Non-contact Switch Chassis surface (resin or glass) 10 ~ 20 cm PCB Sensor Detecting distance will vary by the chassis material used. Common Application Polyethylene 1~2m Chassis surface PCB Sensor Detecting distance increased to a few meters by using a polyethylene plate. Part Schematic Without Lens Type With Lens Type Drain Drain D D G G S Source S Source GND GND GND GND © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com SE0206_PL • 5/6/2020 8 Proximity Sensors – PL Pyroelectric Infrared Sensors Tape & Reel Packaging Information Sensor Series Packaging Type Pieces per Reel PL Tape & Reel 2,000 Series Packaging Type Pieces per Tray Pieces per Box PL Tray 100 2,000 Lens Taping Specifications Dimensions of indented square hole plastic tape 2±0.1 8±0.1 4±0.1 A 4 5.3±0.1 3 12±0.3 1 0.3±0.1 5.5±0.1 B 2 2.1±0.1 1.75±0.1 Ø1.5±0.1 0 A’ R0.3 B’ Ø1.5±0.1 0 5° 5.5±0.1 R0.3 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com SE0206_PL • 5/6/2020 9 Proximity Sensors – PL Pyroelectric Infrared Sensors Tape & Reel Packaging Information cont. Reel Specifications Label Cover tape Carrier tape Feed hole Handling Precautions Pyroelectric Infrared Sensors should be kept away from indirect and direct sunlight, the headlights of cars, wind, and exposure to strong vibration and strong shock. Do not use in water, alcohol ETA, corrosive gas or undersea breeze. Do not drop or apply any mechanical stress. Pyroelectric Infrared Sensors should be stored in normal working environments. Do not expose to high temperatures, high humidity, corrosive atmospheres, and avoid long-term storage. KEMET recommends that maximum storage temperature not exceed 25°C and maximum storage humidity not exceed 50% relative humidity. Atmospheres should be free of chlorine and sulfur-bearing compounds. Temperature fluctuations should be minimized to avoid condensation on the parts. The stock of sensors should be used promptly, preferably within six months of receipt. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com SE0206_PL • 5/6/2020 10 Proximity Sensors – PL Pyroelectric Infrared Sensors KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. When providing KEMET products and technologies contained herein to other countries, the customer must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the International Traffi c in Arms Regulations (ITAR), the US Export Administration Regulations (EAR) and the Japan Foreign Exchange and Foreign Trade Act. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com SE0206_PL • 5/6/2020 11