PYR7511-47

Accessories accessories PYR 5008 and 7511 resistors • For voltage balancing and/or discharge of electrolytic capacitors • Fits capacitor diameters 50–90 mm • Easy to mount application Basic design Voltage balancing of series connected The PYR resistors are wire wound on a electrolytic can type capacitors and/or dis- ceramic core and coated with high temperature silicone. The mounting brackets charge purposes. are made of stainless steel and connected by two point spot welding. Specification Standards Resistance range Resistance tolerance Rated voltage Temperature range CECC 40201, MIL -R26E 10–47 kW +/– 5% 700 VDC acc. to CECC 40201-003 –55 to +105°C Dimensions table PYR (mm) Type A L ±1 d ±2 m B H ±1 S ±1 D max PYR 5008 PYR 7511 22.0* 32.0 40 50 10.6 10.6 6.3 6.3 21 21 15 15 0.4 0.4 10 10 Weight approx (g) 9 11 * Brackets are adjustable up to A = 28.5 Article table PYR Article code PYR 5008 / 47 PYR 7511 / 10 PYR 7511 / 18 PYR 7511 / 27 PYR 7511 / 47 * Other R values on request 150 R (kW)* 47 10 18 27 47 Pmax (W) 40°C 10 13 13 13 13 Pmax (W) 85°C 8 11 11 11 11 Pmax (W) 105°C 7 10 10 10 10 Fits cap. diameter 50–65 75–90 75–90 75–90 75–90 Accessories Mounting data for the accessories Nylon cap nuts Mounting hole mm (min) Max chassis thickness (mm) Width of jaws (mm) Ø 17.5 5 17 Ø 17.5 5 Ø 22.5 Ø 30.5 Creepage distance (mm) Test voltage 50–60 Hz 1 min (KVAC) Max tightening torque (NM) Capacitor diameter (mm) 4.5 2.5 3 Ø = 35 19 2.5 2,5 8 Ø > 35 5 19 5 2.5 8 Ø > 35 5 19 9 4 8 Ø > 35 PYB 7033, M8 PYB 7026, M12 PYB 7041, M12 PYB 7042, M12 Screws stainless steel Washers stainless steel M l D d t S Max tightening torque (NM) 10 8.7 5.1 1.2 10 ØD Ød t M5 3 PYC 6750, M5 PYC 7150, M5 ØD Ød t PYC 6751, M6* M6 12 11.1 6.1 1.6 12 5* PYC 6756, M6* * M6 and M5 (max connector thickness 3 mm incl. washer) 151 Accessories Clips Dimensions mm M aterial Zinc plated steel Horizontal Mounting TYPE H1 H2 CAN DIA 25.0 35.0 A B C F 40.0 52.0 22.3 22.3 12.8 12.8 10.0 10.0 A B C F 49.0 58.0 65.0 19.0 19.0 19.0 37.0 45.0 52.4 10.0 9.0 9.5 Vertical Mounting TYPE V2 V3 V9 TYPE V4 V6 V8 PYC6041 CAN DIA 25.0 35.0 40.0 CAN DIA 51.0 45.0 63.5 35 TYPE CAN DIA UTE2736 35.0 TYPE V10 V11 V90 UTE2737 UTE2738 UTE2739 PYC6042 PYC6043 PYC6044 PYC6045 CAN DIA 65.0 76.0 90.0 50.0 65.0 72.0 50 65 75 90 A B C E F 75.0 69.5 88.9 64 25.4 17.4 25.4 19 64.0 58.0 77.5 52 5.0 4.0 5.0 4.5 10.0 10.0 9.5 11.5 A B C D F 63.0 12.2 54.0 17.2 9.0 A B C D E F G 90.0 103.0 116.0 75.5 88.5 97.0 78 90.5 100.5 115.5 40.0 45.5 53.5 33.5 39.0 44.0 32.5 38 43 50.5 30.0 30.0 30.0 27.0 27.0 28.0 30 36 36 36 5.0 5.0 5.0 4.3 4.3 4.3 5.5 5.5 5.5 5.5 4.5 4.5 4.5 4.3 4.3 4.3 4.5 4.5 4.5 4.5 - - - 39.5 45.0 50.0 39 44 49 56.5 10 10 10 10 10 10 12 12 12 12 Note When using mounting clamps care should be taken not to obscure any safety vent in the can. Delivered without bolts and nuts for mounting. 152 G ACCESSORIES MOUNTING KITS Insulated version M8 Stud (M12 Stud) Non-insulated version M8 Stud (M12 Stud) Dimensions mm. All the above accessories may be ordered individually using the part number shown, or as kits using the kit part numbers shown below. Kit Contents and Ordering Information Standard Kits Part code Description 2352 Steel washer M8 2353 Steel washer M12 2772 Stepped poly washer M8 2773 Stepped poly washer M12 2778 Plain poly washer M8 2779 Plain poly washer M12 2788 Steel nut M12 2789 Steel nut M8 PYB7033 Nylon nut M8 PYB7026 Nylon nut M12 Kit description Kit order number 2740 - - • - • - - - • - 2741 - - - • - • - - - • 2782 • - - - - - - • - - 2785 • • - Insulated M8 Insulated M12 Non-insulated M8 Non-insulated M12 Special Kits Part code 2352 2353 2772 2773 2778 2779 2788 2789 PYB7041 PYB7042 Description Steel washer M8 Steel washer M12 Stepped poly washer M8 Stepped poly washer M12 Plain poly washer M8 Plain poly washer M12 Steel nut M12 Steel nut M8 Nylon nut M12 Nylon nut M12 2690 - • - • - - • - - - 2691 - - • - • - - • - - Kit order number 2692 • - • - • - - • - - 2693 - • - • - • • - - - 2695 • • • - Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. 153 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Kemet: PYC6042 PYC6044 PYC6041 PYC6043 PYC6750 2740 2741 2772 2773 2778 2779 H1 H2 V10 V11 V2 V3 V4 V8 V9 PYR5008-47 PYR7511-10 PYR7511-18 PYR7511-47