R41BI147050T0K

Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Overview Applications The R41B is constructed of metallized polypropylene film, encapsulated with self-extinguishing resin, in a box of material meeting the requirements of UL 94 V–0. For use in electromagnetic interference (EMI) suppression filter in "line-to-ground" and "across-the-line" applications, requiring Y2/X1 safety classification. Suitable for use in situations where failure of the capacitor could lead to danger of electric shock. Automotive Grade devices meet the demanding Automotive Electronics Council's AEC–Q200 qualification requirements. Benefits • Approvals: ENEC, UL, cUL, CQC • Class Y2/X1 (IEC 60384-14) • THB Grade IIIB: 85°C, 85% RH, 1,000 hours at 350 V URAC acc. to IEC 60384-14 • Halogen-Free (black case) upon request • Rated voltage: 350 VAC 50/60 Hz • Capacitance range: 0.0022 – 1.2 µF • Lead spacing: 10 – 37.5 mm • Capacitance tolerance: ±20%, ±10% • Climatic category 40/125/56, IEC 60068-1 • Tape and reel in accordance with IEC 60286-2 • RoHS compliant and lead-free terminations • Operating temperature range of −40˚C to +125˚C • Self-healing properties • Automotive (AEC–Q200) grade Part Number System R41 B I 2330 00 T0 M V106 Series Rated Voltage (VAC) Lead Spacing (mm) Capacitance Code (pF) Packaging Internal Use Capacitance Tolerance Optional C-Spec See Ordering Options Table T0 T1 Y2, Metallized Polypropylene B = 350 F = 10.0 I = 15.0 N = 22.5 R = 27.5 W = 37.5 The last three digits represent significant figures. The first digit specifies number of zeros to be added. K = ±10% M = ±20% Blank = Standard, grey case V106 = Halogen Free Version, black case Built Into Tomorrow © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3127_R41B_Y2_350 • 12/3/2021 1 Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Ordering Options Table Lead Spacing Nominal (mm) Lead Length (mm) Lead and Packaging Code 4 +2/−0 H0= 18.5 ±0.5 00 DQ Tape & Reel (Large Reel) H0= 18.5 ±0.5 CK Tape & Reel (Standard Reel) H0= 18.5 ±0.5 GY Bulk (Bag)2 – Short Leads 3.5 +0.5/−0 JB Bulk (Bag) – Short Leads 4.0 +0.5/−0 JE Bulk (Bag) – Short Leads 3.2 +0.3/−0.2 JH Bulk (Bag) – Long Leads 18 ±1 JM Bulk (Bag) – Long Leads 30 +5/−0 40 Bulk (Bag) – Long Leads 25 +2/−1 50 4 +2/−0 H0= 18.5 ±0.5 00 CK1 30 +5/−0 25 +2/−1 40 50 4 +2/−0 00 30 +5/−0 25 +2/−1 40 50 Type of Leads and Packaging Standard Lead and Packaging Options Bulk (Bag) – Short Leads Ammo Pack 10 15 22.5 Other Lead and Packaging Options 2 2 Standard Lead and Packaging Options 27.5 Bulk (Tray) – Short Leads Tape & Reel (Large Reel) Other Lead and Packaging Options Bulk (Tray) – Long Leads Bulk (Tray) – Long Leads Standard Lead and Packaging Options Bulk (Tray)3 – Short Leads 37.5 Other Lead and Packaging Options Bulk (Tray)3 – Long Leads Bulk (Tray)3 – Long Leads Not for all sizes, see "Packaging Quantities" table For lead spacing 22.5 case sizes ≥ 8.5*17*26.5 the parts are packed in a Pizza box 335*320*34 mm 3 For standard (no C-Spec); with C-Spec "V106" packaging is in Pizza Pack 1 2 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3127_R41B_Y2_350 • 12/3/2021 2 Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Dimensions – Millimeters FRONT VIEW SIDE VIEW L T H S LL F S T H L F Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 37.5 37.5 37.5 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 4.0 5.0 6.0 5.0 6.0 7.5 8.5 10.0 11.0 6.0 7.0 8.5 10.0 11.0 13.0 13.0 14.0 18.0 13.0 16.0 20.0 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.7 +0.2/−0.7 +0.2/−0.7 +0.2/−0.7 +0.2/−0.7 +0.2/−0.7 9.0 11.0 12.0 11.0 12.0 13.5 14.5 16.0 19.0 15.0 16.0 17.0 18.5 20.0 22.0 22.0 28.0 33.0 24.0 28.5 40.0 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 26.5 32.0 32.0 32.0 41.5 41.5 41.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 Note: See Ordering Options Table for lead length (LL/H0) options. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3127_R41B_Y2_350 • 12/3/2021 3 Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Dimensions – Millimeters for parts with C-Spec "V106" (Halogen-Free parts) FRONT VIEW SIDE VIEW L T H S LL F S T H L F Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 37.5 37.5 37.5 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 4.0 5.0 6.0 5.0 6.0 7.5 8.5 10.0 11.0 6.0 7.0 8.5 10.0 11.0 13.0 13.0 14.0 18.0 13.0 16.0 20.0 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.7 +0.3/-0.7 +0.3/-0.7 +0.3/-0.7 +0.3/-0.7 +0.3/-0.7 9.0 11.0 12.0 11.0 12.0 13.5 14.5 16.0 19.0 15.0 16.0 17.0 18.5 20.0 22.0 22.0 28.0 33.0 24.0 28.5 40.0 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.7 +0.3/-0.7 +0.3/-0.7 +0.3/-0.7 +0.3/-0.7 +0.3/-0.7 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 26.5 32.0 32.0 32.0 42.0 42.0 42.0 +0.5/-0.5 +0.5/-0.5 +0.5/-0.5 +0.5/-0.5 +0.5/-0.5 +0.5/-0.5 +0.5/-0.5 +0.5/-0.5 +0.5/-0.5 +0.5/-0.5 +0.5/-0.5 +0.5/-0.5 +0.5/-0.5 +0.5/-0.5 +0.5/-0.5 +0.5/-0.7 +0.5/-0.7 +0.5/-0.7 +0.5/-0.7 +0.5/-0.7 +0.5/-0.7 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 Note: See Ordering Options Table for lead length (LL/H0) options. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3127_R41B_Y2_350 • 12/3/2021 4 Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Performance Characteristics Dielectric Plates Winding Leads Protection Related Documents Rated Voltage (VR) Polypropylene film Metal layer deposited by evaporation under vacum Non-inductive type Tinned wire Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL 94 IEC 60384-14, EN 60384-14 350 VAC (50/60 Hz)/1,500 VDC Capacitance Range 0.0022 – 1.2 µF Capacitance Values E6 series (IEC 60063) Capacitance Tolerance Temperature Range Climatic Category Reliability ±10%, ±20% −40°C to +125°C 40/125/56 IEC 60068-1 Operational life 100,000 hours at 85°C; 2,000 hours at 125°C Storage time: ≤ 24 months from the date marked on the label package Average relative humidity per year ≤ 70% Storage Conditions RH ≤ 85% for 30 days randomly distributed throughout the year Dew is absent Temperature: −40 to 80°C (see "Maximum Humidity in Storage Conditions" graph below) Approvals ENEC, UL, cUL, CQC Maximum Values at +25°C ±5°C Dissipation Factor (tanδ) at 1 kHz Hi-Pot Test pitch = 10 mm pitch ≥ 15 mm 0.8% 0.3% (typical: 0.2%) Terminal To Terminal 4.0k VDC (Type test 60 seconds, each ramp 5 seconds) Terminal To Case 4.0k VDC (Type test 60 seconds, each ramp 5 seconds) Measured at +25°C ±5°C Insulation Resistance Minimum Values Between Terminals Voltage Charge Voltage Charge Time C ≤ 0.33 μF C > 0.33 μF 1 minute ≥ 1 • 10 MΩ ( ≥ 5 • 105 MΩ )* ≥ 30,000 MΩ • µF ( ≥ 150,000 MΩ • µF )* 100 VDC 5 * Typical value © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3127_R41B_Y2_350 • 12/3/2021 5 Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Performance Characteristics cont. Maximum Humidity in Storage Condition 100 90 80 70 60 50 40 30 20 10 0 −40 Maximum Irms vs. Th Relative Humidity (%) 120% Maximum Irms 100% 30 Days Annual Average 80% 60% 40% 20% −20 0 20 40 60 Temperature (°C) 80 0% 25 35 45 55 65 75 85 95 105 115 125 Temperature Th(°C) Maximum Overtemperature ∆Tlim vs Th 25 ∆Tlim (°C) 20 15 10 5 130 120 110 100 90 80 70 60 50 40 30 20 0 10 0 Temperature Th(°C) Th is the maximum ambient temperature surrounding the capacitor or hottest contact point (e.g. tracks), whichever is higher, in the worst operation conditions in °C. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3127_R41B_Y2_350 • 12/3/2021 6 Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Maximum Voltage (Vrms) Versus Frequency (Sinusoidal Waveform/Th ≤ 85°C) Lead Spacing 15 mm Lead Spacing 10 mm 100 100 Voltage (Vrms) 1,000 Voltage (Vrms) 1,000 0.022 µF 0.068 µF 10 1 0.1 1.0 Frequency (kHz) 10.0 1 100.0 0.01 µF 0.022 µF 0.068 µF 10 0.1 1.0 Lead Spacing 22.5 mm 100 Voltage (Vrms) 100 Voltage (Vrms) 1,000 1 0.047 µF 0.1 µF 0.22 µF 0.1 1.0 Frequency (kHz) 10.0 10.0 100.0 Lead Spacing 27.5 mm 1,000 10 Frequency (kHz) 100.0 0.22 µF 0.47 µF 0.68 µF 10 1 0.1 1.0 Frequency (kHz) 10.0 100.0 Lead Spacing 37.5 mm 1,000 Voltage (Vrms) 100 0.47 µF 1 µF 10 1 0.1 1.0 Frequency (kHz) 10.0 100.0 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3127_R41B_Y2_350 • 12/3/2021 7 Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Maximum Current (Irms) Versus Frequency (Sinusoidal Waveform/Th ≤ 85°C) Lead Spacing 15 mm Lead Spacing 10 mm 1 10 1 Current (Arms) Current (Arms) 0.022 µF 0.068 µF 0.1 0.1 0.01 µF 0.022 µF 0.068 µF 0.01 0.01 0.1 1.0 Frequency (kHz) 10.0 0.1 100.0 1.0 Lead Spacing 22.5 mm Frequency (kHz) 100.0 Lead Spacing 27.5 mm 10 1 1 Current (Arms) Current (Arms) 10 0.047 µF 0.1 µF 0.22 µF 0.1 10.0 0.22 µF 0.47 µF 0.68 µF 0.1 0.01 0.01 0.1 1.0 Frequency (kHz) 10.0 100.0 0.1 1.0 Frequency (kHz) 10.0 100.0 Lead Spacing 37.5 mm 10 Current (Arms) 1 0.47 µF 1 µF 0.1 0.01 0.1 1.0 Frequency (kHz) 10.0 100.0 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3127_R41B_Y2_350 • 12/3/2021 8 Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Qualification Automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AEC–Q200, Stress Test Qualification for Passive Components. For additional information regarding the Automotive Electronics Council and AEC–Q200, please visit their website at www.aecouncil.com. Impedance Graph 10000000 1000000 100000 |Z| (Ω ) 10000 1000 1 nF - p 10 10 nF - p 15 100 100 nF - p 22.5 1µF - p 37.5 10 1 0.1 0.01 0.0001 0.001 0.01 0.1 1 10 Frequency (MHz) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 100 1000 10000 F3127_R41B_Y2_350 • 12/3/2021 9 Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Environmental Test Data Test IEC Publication Procedure Endurance IEC 60384-14 1.7 x VR VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1 second, 1,000 hours at upper rated temperature Vibration IEC 60068-2-6 Test Fc 3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98m/s2 Bump IEC 60068-2-29 Test Eb 1,000 bumps at 390 m/s2 Change of Temperature IEC 60068-2-14 Test Na Upper and lower rated temperature 5 cycles Active Flammability IEC 60384-14 VR +20 surge pulses at 5 kV (pulse every 5 seconds) Passive Flammability IEC 60384-14 IEC 60384-1, IEC 60695-11-5 Needle Flame Test Damp Heat Steady State IEC 60068-2-78 Test Cab +40°C and 93% RH, 56 days 65°C, 93% RH and 1,000 VDC, 1,600 hours Capacitance change (Δ C/C): ≤ 10% Dissipation factor change (Δtanδ): ≤ 150 * 10−4 (at 1 kHz for Cap > 1 µF) Dissipation factor change (Δtanδ): ≤ 240 * 10−4 (at 10 kHz for Cap ≤ 1 µF) IR ≥ 50% of initial limit or minimum 200 MΩ 85°C, 85% RH and 1,500 VDC, 1,000 hours Capacitance change (Δ C/C): ≤ 10% Dissipation factor change (Δtanδ): ≤ 150 * 10−4 (at 1 kHz for Cap > 1 µF) Dissipation factor change (Δtanδ): ≤ 240 * 10−4 (at 10 kHz for Cap ≤ 1 µF) IR ≥ 50% of initial limit or minimum 200 MΩ 85°C, 85% RH and 350 VAC, 1,000 hours Capacitance change (Δ C/C): ≤ 10% Dissipation factor change (Δtanδ): ≤ 150 * 10−4 (at 1 kHz for Cap > 1 µF) Dissipation factor change (Δtanδ): ≤ 240 * 10−4 (at 10 kHz for Cap ≤ 1 µF) IR ≥ 50% of initial limit or minimum 200 MΩ THB test1 THB test2 THB test3 Approvals Certification Body Mark Specification File Number IMQ S.p.A. EN/IEC 60384-14 Applying UL UL 60384-14 and CAN/CSA E60384-14 (350 VAC) Applying CQC IEC 60384-14 Applying © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3127_R41B_Y2_350 • 12/3/2021 10 Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Environmental Compliance R41B HF with C-Spec "V106" Table 1 – Ratings & Part Number Reference Dimensions in mm Capacitance Value (µF) T H L Lead Spacing (S) dV/dt (V/µs) KEMET Part Number Customer Part Number 0.0022 0.0033 0.0047 0.0047 0.0068 0.0047 0.0068 0.010 0.015 0.015 0.022 0.022 0.033 0.033 0.047 0.068 0.047 0.068 0.10 0.10 0.15 0.15 0.22 0.22 0.33 0.47  0.68 0.47 0.68 1.0 1.2 4.0 5.0 5.0 6.0 6.0 5.0 5.0 5.0 5.0 6.0 6.0 7.5 7.5 8.5 10.0 11.0 6.0 7.0 8.5 10.0 10.0 11.0 13.0 13.0 14.0 18.0 18.0 13.0 16.0 20.0 20.0 9.0 11.0 11.0 12.0 12.0 11.0 11.0 11.0 11.0 12.0 12.0 13.5 13.5 14.5 16.0 19.0 15.0 16.0 17.0 18.5 18.5 20.0 22.0 22.0 28.0 33.0 33.0 24.0 28.5 40.0 40.0 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 26.5 26.5 32.0 32.0 32.0 32.0 41.5 41.5 41.5 41.5 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 800 800 800 800 800 600 600 600 600 600 600 600 600 600 600 600 500 500 500 500 500 500 500 400 400 400 400 300 300 300 300 41BF1220(1)T0(2) 41BF1330(1)T0(2) 41BF1470(1)T1(2) 41BF1470(1)T0(2) 41BF1680(1)T0(2) 41BI1470(1)T0(2) 41BI1680(1)T0(2) 41BI2100(1)T0(2) 41BI2150(1)T1(2) 41BI2150(1)T0(2) 41BI2220(1)T1(2) 41BI2220(1)T0(2) 41BI2330(1)T1(2) 41BI2330(1)T0(2) 41BI2470(1)T0(2) 41BI2680(1)T0(2) 41BN2470(1)T0(2) 41BN2680(1)T0(2) 41BN3100(1)T1(2) 41BN3100(1)T0(2) 41BN3150(1)T1(2) 41BN3150(1)T0(2) 41BN3220(1)T0(2) 41BR3220(1)T0(2) 41BR3330(1)T0(2) 41BR3470(1)T0(2) 41BR3680(1)T0(2) 41BW3470(1)T0(2) 41BW3680(1)T0(2) 41BW4100(1)T0(2) 41BW4120(1)T0(2) R41BF1220(1)T0(2) R41BF1330(1)T0(2) R41BF1470(1)T1(2) R41BF1470(1)T0(2) R41BF1680(1)T0(2) R41BI1470(1)T0(2) R41BI1680(1)T0(2) R41BI2100(1)T0(2) R41BI2150(1)T1(2) R41BI2150(1)T0(2) R41BI2220(1)T1(2) R41BI2220(1)T0(2) R41BI2330(1)T1(2) R41BI2330(1)T0(2) R41BI2470(1)T0(2) R41BI2680(1)T0(2) R41BN2470(1)T0(2) R41BN2680(1)T0(2) R41BN3100(1)T1(2) R41BN3100(1)T0(2) R41BN3150(1)T1(2) R41BN3150(1)T0(2) R41BN3220(1)T0(2) R41BR3220(1)T0(2) R41BR3330(1)T0(2) R41BR3470(1)T0(2) R41BR3680(1)T0(2) R41BW3470(1)T0(2) R41BW3680(1)T0(2) R41BW4100(1)T0(2) R41BW4120(1)T0(2) Capacitance Value (µF) T (mm) H (mm) L (mm) Lead Spacing (S) dV/dt (V/µs) KEMET Part Number Customer Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (2) M = ±20%, K = ±10% (3) M = ±20% (only available tolerance). © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3127_R41B_Y2_350 • 12/3/2021 11 Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Table 2 – Ratings & Part Number Reference for parts with C-Spec "V106" Dimensions in mm Capacitance Value (µF) T H 0.0022 0.0033 0.0047 0.0047 0.0068 0.0047 0.0068 0.010 0.015 0.015 0.022 0.022 0.033 0.033 0.047 0.068 0.047 0.068 0.10 0.10 0.15 0.15 0.22 0.22 0.33 0.47  0.68 0.47 0.68 1.0 1.2 4.0 5.0 5.0 6.0 6.0 5.0 5.0 5.0 5.0 6.0 6.0 7.5 7.5 8.5 10.0 11.0 6.0 7.0 8.5 10.0 10.0 11.0 13.0 13.0 14.0 18.0 18.0 13.0 16.0 20.0 20.0 9.0 11.0 11.0 12.0 12.0 11.0 11.0 11.0 11.0 12.0 12.0 13.5 13.5 14.5 16.0 19.0 15.0 16.0 17.0 18.5 18.5 20.0 22.0 22.0 28.0 33.0 33.0 24.0 28.5 40.0 40.0 Capacitance Value (µF) T (mm) H (mm) L Lead Spacing (S) dV/dt (V/µs) KEMET Part Number Customer Part Number 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 26.5 26.5 32.0 32.0 32.0 32.0 42.0 42.0 42.0 42.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 800 800 800 800 800 600 600 600 600 600 600 600 600 600 600 600 500 500 500 500 500 500 500 400 400 400 400 300 300 300 300 41BF1220(1)T0(2)V106 41BF1330(1)T0(2)V106 41BF1470(1)T1(2)V106 41BF1470(1)T0(2)V106 41BF1680(1)T0(2)V106 41BI1470(1)T0(2)V106 41BI1680(1)T0(2)V106 41BI2100(1)T0(2)V106 41BI2150(1)T1(2)V106 41BI2150(1)T0(2)V106 41BI2220(1)T1(2)V106 41BI2220(1)T0(2)V106 41BI2330(1)T1(2)V106 41BI2330(1)T0(2)V106 41BI2470(1)T0(2)V106 41BI2680(1)T0(2)V106 41BN2470(1)T0(2)V106 41BN2680(1)T0(2)V106 41BN3100(1)T1(2)V106 41BN3100(1)T0(2)V106 41BN3150(1)T1(2)V106 41BN3150(1)T0(2)V106 41BN3220(1)T0(2)V106 41BR3220(1)T0(2)V106 41BR3330(1)T0(2)V106 41BR3470(1)T0(2)V106 41BR3680(1)T0(2)V106 41BW3470(1)T0(2)V106 41BW3680(1)T0(2)V106 41BW4100(1)T0(2)V106 41BW4120(1)T0(2)V106 R41BF1220(1)T0(2)V106 R41BF1330(1)T0(2)V106 R41BF1470(1)T1(2)V106 R41BF1470(1)T0(2)V106 R41BF1680(1)T0(2)V106 R41BI1470(1)T0(2)V106 R41BI1680(1)T0(2)V106 R41BI2100(1)T0(2)V106 R41BI2150(1)T1(2)V106 R41BI2150(1)T0(2)V106 R41BI2220(1)T1(2)V106 R41BI2220(1)T0(2)V106 R41BI2330(1)T1(2)V106 R41BI2330(1)T0(2)V106 R41BI2470(1)T0(2)V106 R41BI2680(1)T0(2)V106 R41BN2470(1)T0(2)V106 R41BN2680(1)T0(2)V106 R41BN3100(1)T1(2)V106 R41BN3100(1)T0(2)V106 R41BN3150(1)T1(2)V106 R41BN3150(1)T0(2)V106 R41BN3220(1)T0(2)V106 R41BR3220(1)T0(2)V106 R41BR3330(1)T0(2)V106 R41BR3470(1)T0(2)V106 R41BR3680(1)T0(2)V106 R41BW3470(1)T0(2)V106 R41BW3680(1)T0(2)V106 R41BW4100(1)T0(2)V106 R41BW4120(1)T0(2)V106 L (mm) Lead Spacing (S) dV/dt (V/µs) KEMET Part Number Customer Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (2) M = ±20%, K = ±10% © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3127_R41B_Y2_350 • 12/3/2021 12 Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183°C for SnPb eutectic alloy to 217 – 221°C for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170°C). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm), and great care has to be taken during soldering. The recommended solder profiles from KEMET should be used. Please consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. Please see Figure 1. Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the above the recommended limits may result to degradation or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through-hole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle. Wave Soldering Recommendations Manual Soldering Recommendations The following is the recommendation for manual soldering with a soldering iron. 300 Second Wave First Wave Recommended Soldering Temperature Temperature (°C) 200 400 350 Soldering Iron Bit Temperature (°C) 2+3 seconds max 260°C 250 300 ∆ T < 150°C Cooling Preheating 150 ca. 2°C/second ca. 3.5°C/second typical ca. 5°C/second Tpreheat 100 Typical 250 50 200 150 0 100 0 40 80 120 160 200 240 Time (seconds) 50 0 0 1 2 3 4 5 6 7 8 Soldering Time (seconds) The soldering iron tip temperature should be set at 350°C (+10°C maximum) with the soldering duration not to exceed more than 3 seconds. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3127_R41B_Y2_350 • 12/3/2021 13 Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Soldering Process cont. Wave Soldering Recommendations cont. 1. The table indicates the maximum set-up temperature of the soldering process Figure 1 Dielectric Film Material Maximum Preheat Temperature Maximum Peak Soldering Temperature Capacitor Capacitor Capacitor Capacitor Pitch Pitch Pitch Pitch ≤ 15 mm > 15 mm ≤ 15 mm > 15 mm Polyester 130°C 130°C 270°C 270°C Polypropylene 125°C 130°C 260°C 270°C Paper 130°C 140°C 270°C 270°C Polyphenylene Sulphide 150°C 160°C 270°C 270°C 2. The maximum temperature measured inside the capacitor: Set the temperature so that inside the element the maximum temperature is below the limit: Dielectric Film Material Maximum temperature measured inside the element Polyester 160°C Polypropylene 125°C Paper 160°C Polyphenylene sulphide 160°C Temperature monitored inside the capacitor. Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as in normal flow soldering without touching the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected components, and pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document, however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than in double wave flow soldering, and great care must be taken so that the parts are not overheated. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3127_R41B_Y2_350 • 12/3/2021 14 Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Mounting Resistance to Vibration and Mechanical Shock AEC-Q200 Mechanical Stress Tests: Mechanical Shock Vibration MIL-SDT-202 Method 213 Test condition C Peak value 100 g, duration 6 ms, half-sine-wave (see MIL-HDBK for details) MIL-SDT-202 Method 204 5 g for 20 minutes, 12 cycles each of 3 orientations Use 8"X5" PCB, 0.031" thick. 7 secure points on one 8" side and 2 secure points at corners of opposite sides. Parts mounted within 2" from any secure point. Test from 10 – 2,000 Hz. The capacitors are designed for PCB mounting. The stand-off pipes must be in good contact with the printed circuit board. The capacitors with pitch ≤ 22.5 mm can be mechanically fixed by the leads, for pitch > 22.5 mm, the capacitor body has to be properly fixed (e.g. clamped or glued). Construction 2 Sections Molded Plastic Case Detailed Cross Section Molded Plastic Self-Extinguishing Case Resin Single-sided Metallized Polypropylene Film (Second Layer) Margin Margin Metal Contact Layer Metal Contact Layer FILM WINDING SCHEME OPTIONS Margin Leads etallized Polypropylene Film Winding Scheme sided ized pylene m sided ized pylene Single-sided Metallized Polypropylene Film (First Layer) Double-sided Metallized Polyester Film With C-Spec "V106", the case will be in black color Single-sided Metallized Polypropylene Film Double-sided Metallized Polypropylene Polyester Carrier Film Dielectric Film Double-sided Metallized Polyester Carrier Film 2 Sections © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Double-sided Single-sided Metallized Metallized Polyester Polypropylene 2 Sections 1 Section F3127_R41B_Y2_350 • 12/3/2021 Double-sided Metallized Polypropylene Polyester Carrier Film Dielectric Film 15 Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Marking Lead Spacing 10 mm (Small Case Sizes) FRONT TOP Series, Dielectric Code, Safety Class, Self Healing Approval Marks Manufacturer’s Logo Capacitance Tolerance Capacitance, Rated Voltage, T Series Date Code IEC Climatic Category Passive Flammability Category Manufacturing Plant NOTE: Hot imprinting with or without color or ink jet or laser marking Lead Spacing 15 – 27.5 mm (Small Case Sizes) FRONT TOP Capacitance Tolerance Series, Dielectric Code, Safety Class, Self Healing Approval Marks Manufacturer’s Logo Capacitance, Rated Voltage T-Series Date Code IEC Climatic Category Passive Flammability Category Manufacturing Plant NOTE: Hot imprinting with or without color or ink jet or laser marking Manufacturing Date Code (IEC 60062) Lead Spacing 27.5 mm (alternatives*) and 37.5 mm Year 2010 2011 2012 2013 2014 2015 Approval 2016 Marks Code A B C D E F H Year 2017 FRONT 2018 2019 2020 2021 2022 2023 Code Year J K L M N P R 2024 2025 2026 2027 2028 2029 2030 Code S T U V Manufacturer’s W Logo X A Capacitance, Capacitance Tolerance © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com IEC Climatic Category Month Code TOP January 1 February Series Dielectric 2 Safety March Code 3 Class April 4 May 5 June 6 Month Code July August Self Healing September October November December 7 8 9 O N Rated D Voltage T Series Passive Flammability Category QA Number F3127_R41B_Y2_350 • 12/3/2021 16 Manufacturing Date Code Plant Date Code IEC Climatic Manufacturing Category Plant Metallized Polypropylene Film EMI Suppression Capacitors Passive Flammability Category R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) NOTE: Hot imprinting with or without color or ink jet or laser marking Marking cont. Lead Spacing 27.5 mm (alternatives*) and 37.5 mm FRONT TOP Series Dielectric Code Safety Class Self Healing Manufacturer’s Logo Approval Marks Rated Voltage Capacitance, Capacitance Tolerance IEC Climatic Category T Series Passive Flammability Category QA Number Manufacturing Plant Date Code * Differences caused by technology (clichee, laser or ink jet) and production line Lead Spacing 10 mm (C-Spec “V106”) FRONT TOP Series, Dielectric Code, Safety Class, Self Healing Approval Marks Manufacturer’s Logo Capacitance Tolerance Capacitance, Rated Voltage, T Series IEC Climatic Category Date Code Manufacturing Plant Passive Flammability Category NOTE: Hot imprinting with or without color or ink jet or laser marking Manufacturing Date Code (IEC 60062) Year Code Year Code Year Code Month Code Month Code 2010 2011 2012 2013 2014 2015 2016 A B C D E F H 2017 2018 2019 2020 2021 2022 2023 J K L M N P R 2024 2025 2026 2027 2028 2029 2030 S T U V W X A January February March April May June 1 2 3 4 5 6 July August September October November December 7 8 9 O N D © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3127_R41B_Y2_350 • 12/3/2021 17 Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Packaging Quantities Lead Spacing (mm) Thickness (mm) Height Length (mm) (mm) Bulk Short Leads Bulk Long Leads 00 - JA - JB JE - JH JM - 40 - 50 GY - CK1 Ammo Taped T19 Pizza Short Leads T19 Pizza Long Leads CK DQ 00 40 - 50 Standard Large Reel Reel ø 355 mm ø 500 mm 10 4.0 5.0 6.0 9.0 11.0 12.0 13.0 13.0 13.0 2,000 1,300 1,000 1,800 1,500 1,200 750 600 500 1,500 1,250 1,000 1,000 800 680 - 1,000 800 680 15 5.0 6.0 7.5 8.5 10.0 11.0 11.0 12.0 13.5 14.5 16.0 19.0 18.0 18.0 18.0 18.0 18.0 18.0 2,000 1,750 1,000 1,000 750 450 1,000 900 700 500 500 350 600 500 350 300 270 270 1,250 1,000 800 700 600 500 800 680 500 440 380 340 - 800 680 500 440 380 340 22.5 6.0 7.0 8.5 10.0 11.0 13.0 15.0 16.0 17.0 18.5 20.0 22.0 26.5 26.5 26.5 26.5 26.5 26.5 805 700 468 396 360 300 500 500 300 300 250 200 300 250 250 160 160 130 700 550 450 350 350 300 464 380 280 235 217 - - 464 380 280 235 217 - 27.5 13.0 14.0 18.0 22.0 28.0 33.0 32.0 32.0 32.0 480 352 256 288 176 128 - 300 - - - - 37.5 13.0 16.0 20.0 24.0 28.5 40.0 41.5 41.5 41.5 360 216 126 216 108 84 - - - - - - - 168 66 58 84 66 58 R41B with C-Spec "V106" in black case: 37.5 13.0 16.0 20.0 24.0 28.5 40.0 42.0 42.0 42.0    -    - © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com - F3127_R41B_Y2_350 • 12/3/2021 18 Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) Figure 1 Lead Spacing 10 mm Figure 2 Lead Spacing 15 mm Figure 3 Lead Spacing 22.5 – 27.5 mm P W2 P2 ød A B W W0 W1 H0 P1 P0 F P h h D0 P1 P2 A-B t Taping Specification Dimensions (mm) Description Symbol 10 Fig. 1 Lead Space 15 22.5 Fig. 2 Fig. 3 27.5 Fig. 3 Tol. Lead wire diameter d 0.6 0.6–0.8 0.8 0.8 ±0.05 Taping lead space P 25.4 25.4 38.1 38.1 ±1 Feed hole lead space * P0 12.7 12.7 12.7 12.7 ±0.2 ** Centering of the lead wire P1 7.7 5.2 7.8 5.3 ±0.7 Centering of the body P2 12.7 12.7 19.05 19.05 ±1.3 Lead spacing (pitch) *** F 10 15 22.5 27.5 +0.6/−0.1 Component alignment Δh 0 0 0 0 ±2 Height of component from tape center H 0 **** 18.5 18.5 18.5 18.5 ±0.5 Carrier tape width W 18 18 18 18 +1/−0.5 Hold down tape width W0 9 10 10 10 Minimum Hole position W1 9 9 9 9 ±0.5 Hold down tape position W2 3 3 3 3 Maximum Feed hole diameter D0 4 4 4 4 ±0.2 Total tape thickness t 0.7 0.7 0.7 0.7 ±0.2 * 15 mm also available ** Maximum of 1 mm on 20 lead spaces *** Pitches 15 mm and 10 mm taped to 7.5 mm (crimped leads) available upon request **** H0 = 16.5 mm is available upon request © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3127_R41B_Y2_350 • 12/3/2021 19 Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) cont. Ammo Specifications Dimensions (mm) H W T 360 340 59 H T W Reel Specifications Reel Size Standard Large Dimensions (mm) D H W 355 500 30 25 55 Maximum D H W © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3127_R41B_Y2_350 • 12/3/2021 20 Metallized Polypropylene Film EMI Suppression Capacitors R41B, THB GradeIIIB, Class X1/Y2, 350 VAC, 125°C (Automotive Grade) KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3127_R41B_Y2_350 • 12/3/2021 21