R46

Loose Taped Fig.1 Fig.2 meTAllized PolYPRoPYlene Film CAPACiToR SELF-HEALING PRoPERTIES Typical applications: interference suppression and «across-the-line» applications. Suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. PRoDUCT CoDE: R46 X2 CLASS (IEC 60384-14) - MKP Series R.46 Insulated rigid leads Insulated flexible leads 0.5mm2 note: R.46 series has replaced the 1.40 series and 1.47 series. For new design we suggest the use of the R.46 series. Pitch Box thickness (B) (mm) (mm) 10.0 15.0 15.0 22.5 27.5 37.5 All 0.33µF Solder bath temperature: +260°C ± 5°C Dipping time (with heat screen):10 s ± 1 s Performance Capacitance change |∆C/C|: ≤2% Winding scheme * Typical value Test voltage between terminations (on all pieces): 1500Vac for 1 s + 2200Vdc for 1 s at +25°C±5°C single sided metallized polypropylene film 09/2008 150 meTAllized PolYPRoPYlene Film CAPACiToR SELF-HEALING PRoPERTIES Rated Cap. 275 Vac / 560 Vdc Std dimensions B 0.010 µF 0.015 µF 0.022 µF 0.033 µF 0.047 µF 0.068 µF 0.10 µF 0.010 µF 0.015 µF 0.022 µF 0.033 µF 0.047 µF 0.068 µF 0.10 µF 0.15 µF 0.15 µF 0.22 µF 0.22 µF 0.22 µF 0.33 µF 0.33 µF 0.33 µF 0.33 µF 0.33 µF 0.47 µF 0.47 µF 0.47 µF 0.56 µF 0.60 µF 0.15 µF 0.22 µF 0.33 µF 0.47 µF 0.68 µF 1.0 µF 1.0 µF 0.47 µF 0.68 µF 1.0 µF 1.5 µF 2.2 µF 2.2 µF 3.3 µF 4.7 µF 4.7 µF 1.5 µF 2.2 µF 2.2 µF 3.3 µF 4.7 µF 4.7 µF 6.8 µF 6.8 µF 10.0 µF 4.0 4.0 4.0 5.0 5.0 6.0 6.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 6.0 9.0 7.5 9.0 6.0 8.5 10.0 9.0 7.5 13.0 7.5 10.0 11.0 11.0 11.0 6.0 6.0 6.0 7.0 10.0 10.0 11.0 9.0 9.0 11.0 13.0 13.0 14.0 18.0 18.0 22.0 11.0 11.0 13.0 16.0 16.0 19.0 20.0 24.0 30.0 H 9.0 9.0 9.0 11.0 11.0 12.0 12.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 12.0 12.5 13.5 12.5 17.5 14.5 16.0 12.5 18.5 12.0 18.5 16.0 19.0 19.0 19.0 15.0 15.0 15.0 16.0 18.5 18.5 20.0 17.0 17.0 20.0 22.0 25.0 28.0 33.0 33.0 37.0 22.0 22.0 24.0 28.5 28.5 32.0 40.0 44.0 45.0 l 13.0 13.0 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 26.5 26.5 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 p 10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Ød max dv/dt at 390Vdc (V/ µs) 500 500 500 500 500 500 500 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 200 200 200 200 200 200 200 150 150 150 150 150 150 150 150 150 100 100 100 100 100 100 100 100 100 R46 KF R46 KF R46 KF R46 KF R46 KF R46 KF R46 KF R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KN R46 KN R46 KN R46 KN R46 KN R46 KN R46 KN R46 KR R46 KR R46 KR R46 KR R46 KR R46 KR R46 KR R46 KR R46 KR 2100 - - N0 2150 - - N0 2220 - - N0 2330 - - M1 2470 - - N0 2680 - - M1 3100 - - M1 2100 - - 01 2150 - - 01 2220 - - 01 2330 - - 01 2470 - - 01 2680 - - 01 3100 - - M1 3150 - - M2 3150 - - L2 3220 - - M2 3220 - - L2 3220 - - 02 3330 - - N0 3330 - - M1 3330 - - N1 3330 - - 02 3330 - - 01 3470 - - 02 3470 - - N0 3470 - - M1 3560 - - N0 3600 - - N0 3150 - - 01 3220 - - M1 3330 - - N0 3470 - - N0 3680 - - M2 4100 - - N2 4100 - - N1 3470 - - 01 3680 - - M1 4100 - - M1 4150 - - M1 4220 - - M2 4220 - - M1 4330 - - M2 4470 - - M2 4470 - - M1 M M M M M M M Part number X2 CLASS (IEC 60384-14) - MKP Series R.46 Not for use in series with the mains. See www.kemet.com for more information. ENEC IEC 60384-14 UL 1414 (up to 1µF, 85°C; 250Vac) CSA - C22.2 No.1 (up to 1µF, 85°C; 250Vac) UL 1283 (310 Vac) Class X2 File No.V4413 APPRoVAlS Not for new design. (**) Across-the-line Across-the-line certified for Canada Electromagnetic Interference Filters Electromagnetic Interference Filters certified for Canada Class X2 File No.E97797 File No.E97797 File No.E85238 CSA - C22.2 No.8 (310 Vac) File No.E85238 GB/T 14472 File CQC03001008199 CQC03001008842 Approved according to IEC 60384-14 According to IEC 60065 (**) ENEC mark has replaced all the following European National marks: Table 1 Standard packaging style lead length (mm) AMMo-PACK AMMo-PACK REEL Ø500mm REEL Ø500mm Loose, short leads Loose, long leads Loose, long leads Loose, insulated rigid leads Loose, insulated flexible leads 04 +2 25 -1/+2 30 +5 30 +5 150 ±5 P2 (mm) 12.70 19.05 12.70 19.05 Taping style Fig. (No.) 1 2 1 2 Pitch (mm) 10.0/15.0 22.5 10.0/15.0 22.5/27.5 ordering code (Digit 10 to 11) DQ DQ CK CK 00 50 40 51 52 R46 KW 4150 - - M1 R46 KW 4220 - - M2 R46 KW 4220 - - M1 R46 KW 4330 - - M1 R46 KW 4470 - - M2 R46 KW 4470 - - M1 R46 KW 4680 - - M2 R46 KW 4680 - - M1 R46 KW 5100 - - M1 Note: Ammo-pack is the preferred packaging for taped version. Rated voltage (K=275Vac) Mechanical version and packaging (Table 1) Tolerance: K (±10%); M (±20%) For “capacitor connected in serial with main line” (two - phase and three - phase net) application, please read the “SHoRT GUIDE To CHooSE THE RIGHT FILM CAPACIToRS” and contact our Technical Service for choosing the safest solution. All dimensions are in mm E12 Series available upon request 151 09/2008 meTAllized PolYPRoPYlene Film CAPACiToR SELF-HEALING PRoPERTIES APPRoVAlS Rated Cap. 275 Vac / 560 Vdc Std dimensions B 0.033 µF 0.047 µF 0.068 µF 0.1 µF 0.1 µF 0.15 µF 0.15 µF 0.22 µF 0.33 µF 0.33 µF 0.33 µF 0.47 µF 0.47 µF 0.47 µF 0.47 µF 0.68 µF 0.68 µF 0.82 µF 0.47 µF 0.56 µF 0.56 µF 0.68 µF 1.0 µF 1.0 µF 1.5 µF 1.5 µF 2.2 µF 1.0 µF 1.5 µF 2.2 µF 3.3 µF 4.7 µF 4.7 µF 6.8 µF 2.2 µF 3.3 µF 4.7 µF 6.8 µF 10.0 µF 4.0 4.0 5.0 5.0 6.0 6.0 5.0 6.0 7.5 9.0 6.0 8.5 9.0 6.0 7.5 10.0 11.0 11.0 6.0 6.0 7.0 7.0 8.5 10.0 10.0 11.0 13.0 9.0 11.0 13.0 14.0 14.0 18.0 22.0 11.0 13.0 16.0 19.0 20.0 H 9.0 9.0 11.0 11.0 12.0 12.0 11.0 12.0 13.5 12.5 17.5 14.5 12.5 17.5 18.5 16.0 19.0 19.0 15.0 15.0 16.0 16.0 17.0 18.5 18.5 20.0 22.0 17.0 20.0 22.0 28.0 28.0 33.0 37.0 22.0 24.0 28.5 32.0 40.0 l 13.0 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 32.0 32.0 32.0 32.0 32.0 32.0 32.0 41.5 41.5 41.5 41.5 41.5 p 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 Ød max dv/dt at 390Vdc (V/ µs) 500 500 500 500 500 500 400 400 400 400 400 400 400 400 400 400 400 400 200 200 200 200 200 200 200 200 200 150 150 150 150 150 150 150 100 100 100 100 100 R46 KF R46 KF R46 KF R46 KF R46 KF R46 KF R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KN R46 KN R46 KN R46 KN R46 KN R46 KN R46 KN R46 KN R46 KN R46 KR R46 KR R46 KR R46 KR R46 KR R46 KR R46 KR 2330 - - P0 2470 - - P0 2680 - - P0 3100 - - P1 3100 - - P0 3150 - - P0 3150 - - P0 3220 - - P0 3330 - - P0 3330 - - P1 3330 - - P2 3470 - - P0 3470 - - P1 3470 - - P2 3470 - - P3 3680 - - P1 3680 - - P0 3820 - - P0 3470 - - P1 3560 - - P1 3560 - - P0 3680 - - P0 4100 - - P1 4100 - - P0 4150 - - P1 4150 - - P0 4220 - - P0 4100 - - P0 4150 - - P0 4220 - - P0 4330 - - P0 4470 - - P1 4470 - - P0 4680 - - P0 M M M M M M M M M M M Part number X2 CLASS (IEC 60384-14) - MKP Series R.46 (**) ENEC IEC 60384-14 UL 1414 (up to 1µF, 85°C; 250Vac) CSA - C22.2 No.1 (up to 1µF, 85°C; 250Vac) UL 1283 (310 Vac) Class X2 File No.V4413 Across-the-line Across-the-line certified for Canada Electromagnetic Interference Filters Electromagnetic Interference Filters certified for Canada Class X2 File No.E97797 File No.E97797 File No.E85238 CSA - C22.2 No.8 (310 Vac) File No.E85238 GB/T 14472 File CQC03001008199 CQC03001008842 Approved according to IEC 60384-14 According to IEC 60065 Not for use in series with the mains. See www.kemet.com for more information. . (**) ENEC mark has replaced all the following European National marks: Table 1 Standard packaging style lead length (mm) AMMo-PACK AMMo-PACK REEL Ø500mm REEL Ø500mm Loose, short leads Loose, long leads Loose, long leads Loose, insulated rigid leads Loose, insulated flexible leads 04 +2 25 -1/+2 30 +5 30 +5 150 ±5 P2 (mm) 12.70 19.05 12.70 19.05 Taping style Fig. (No.) 1 2 1 2 Pitch (mm) 10.0/15.0 22.5 10.0/15.0 22.5/27.5 ordering code (Digit 10 to 11) DQ DQ CK CK 00 50 40 51 52 R46 KW 4220 - - P0 R46 KW 4330 - - P0 R46 KW 4470 - - P0 R46 KW 4680 - - P0 R46 KW 5100 - - P0 Rated voltage (K=275Vac) Mechanical version and packaging (Table 1) Tolerance: K (±10%); M (±20%) Note: Ammo-pack is the preferred packaging for taped version. All dimensions are in mm E12 Series available upon request For “capacitor connected in serial with main line” (two - phase and three - phase net) application, please read the “SHoRT GUIDE To CHooSE THE RIGHT FILM CAPACIToRS” and contact our Technical Service for choosing the safest solution. 09/2008 152 Rated Cap. 300 Vac / 630 Vdc Std dimensions B H 9.0 9.0 9.0 11.0 11.0 12.0 12.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 12.0 12.5 13.5 12.5 17.5 14.5 16.0 18.5 12.0 16.0 19.0 19.0 19.0 15.0 15.0 15.0 16.0 18.5 18.5 20.0 17.0 17.0 20.0 22.0 25.0 28.0 33.0 33.0 37.0 22.0 22.0 24.0 28.5 28.5 32.0 40.0 44.0 45.0 l 13.0 13.0 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 26.5 26.5 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 p 10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 Ød max dv/dt at 390Vdc (V/ µs) 500 500 500 500 500 500 500 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 200 200 200 200 200 200 200 150 150 150 150 150 150 150 150 150 100 100 100 100 100 100 100 100 100 Part number meTAllized PolYPRoPYlene Film CAPACiToR SELF-HEALING PRoPERTIES APPRoVAlS X2 CLASS (IEC 60384-14) - MKP Series R.46 0.010 µF 0.015 µF 0.022 µF 0.033 µF 0.047 µF 0.068 µF 0.10 µF 0.010 µF 0.015 µF 0.022 µF 0.033 µF 0.047 µF 0.068 µF 0.10 µF 0.15 µF 0.15 µF 0.22 µF 0.22 µF 0.22 µF 0.33 µF 0.33 µF 0.33 µF 0.33 µF 0.47 µF 0.47 µF 0.56 µF 0.60 µF 0.15 µF 0.22 µF 0.33 µF 0.47 µF 0.68 µF 1.0 µF 1.0 µF 0.47 µF 0.68 µF 1.0 µF 1.5 µF 2.2 µF 2.2 µF 3.3 µF 4.7 µF 4.7 µF 1.5 µF 2.2 µF 2.2 µF 3.3 µF 4.7 µF 4.7 µF 6.8 µF 6.8 µF 10.0 µF 4.0 4.0 4.0 5.0 5.0 6.0 6.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 6.0 9.0 7.5 9.0 6.0 8.5 10.0 7.5 13.0 10.0 11.0 11.0 11.0 6.0 6.0 6.0 7.0 10.0 10.0 11.0 9.0 9.0 11.0 13.0 13.0 14.0 18.0 18.0 22.0 11.0 11.0 13.0 16.0 16.0 19.0 20.0 24.0 30.0 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 R46 3F R46 3F R46 3F R46 3F R46 3F R46 3F R46 3F R46 3I R46 3I R46 3I R46 3I R46 3I R46 3I R46 3I R46 3I R46 3I R46 3I R46 3I R46 3I R46 3I R46 3I R46 3I R46 3I R46 3I R46 3I R46 3I R46 3I R46 3N R46 3N R46 3N R46 3N R46 3N R46 3N R46 3N R46 3R R46 3R R46 3R R46 3R R46 3R R46 3R R46 3R R46 3R R46 3R R46 3W R46 3W R46 3W R46 3W R46 3W R46 3W R46 3W R46 3W R46 3W 2100 - - N0 2150 - - N0 2220 - - N0 2330 - - M1 2470 - - N0 2680 - - M1 3100 - - M1 2100 - - 01 2150 - - 01 2220 - - 01 2330 - - 01 2470 - - 01 2680 - - 01 3100 - - M1 3150 - - M2 3150 - - L2 3220 - - M2 3220 - - L2 3220 - - 02 3330 - - N0 3330 - - M1 3330 - - 02 3330 - - 01 3470 - - N0 3470 - - M1 3560 - - N0 3600 - - N0 3150 - - 01 3220 - - M1 3330 - - N0 3470 - - N0 3680 - - M2 4100 - - N2 4100 - - N1 3470 - - 01 3680 - - M1 4100 - - M1 4150 - - M1 4220 - - M2 4220 - - M1 4330 - - M2 4470 - - M2 4470 - - M1 4150 - - M1 4220 - - M2 4220 - - M1 4330 - - M1 4470 - - M2 4470 - - M1 4680 - - M2 4680 - - M1 5100 - - M1 M M M M M - (**) ENEC IEC 60384-14 UL 1414 (up to 1µF, 85°C; 250Vac) CSA - C22.2 No.1 (up to 1µF, 85°C; 250Vac) UL 1283 (310 Vac) Class X2 File No.V4413 Across-the-line Across-the-line certified for Canada Electromagnetic Interference Filters Electromagnetic Interference Filters certified for Canada Class X2 File No.E97797 File No.E97797 File No.E85238 CSA - C22.2 No.8 (310 Vac) File No.E85238 GB/T 14472 FileCQC03001008199 CQC03001008842 Approved according to IEC 60384-14 According to IEC 60065 Not for use in series with the mains. See www.kemet.com for more information. (**) ENEC mark has replaced all the following European National marks: Table 1 Standard packaging style lead length (mm) AMMo-PACK AMMo-PACK REEL Ø500mm REEL Ø500mm Loose, short leads Loose, long leads Loose, long leads Loose, insulated rigid leads Loose, insulated flexible leads 04 +2 25 -1/+2 30 +5 30 +5 150 ±5 P2 (mm) 12.70 19.05 12.70 19.05 Taping style Fig. (No.) 1 2 1 2 Pitch (mm) 10.0/15.0 22.5 10.0/15.0 22.5/27.5 ordering code (Digit 10 to 11) DQ DQ CK CK 00 50 40 51 52 Rated voltage (3=300Vac) Mechanical version and packaging (Table 1) Tolerance: K (±10%); M (±20%) Note: Ammo-pack is the preferred packaging for taped version. All dimensions are in mm E12 Series available upon request For “capacitor connected in serial with main line” (two - phase and three - phase net) application, please read the “SHoRT GUIDE To CHooSE THE RIGHT FILM CAPACIToRS” and contact our Technical Service for choosing the safest solution. 153 09/2008 Loose Fig.1 Taped Fig.2 meTAllized PolYPRoPYlene Film CAPACiToR SELF-HEALING PRoPERTIES X2 CLASS (IEC 60384-14) - MKP R.46 Typical applications: interference suppression and «acrossthe-line» applications. Suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. PRoDUCT CoDE: R46 p ≤15 0.6 or 0.8* p = 22.5 0.8 Not for use in series with the mains. See www.kemet.com for more information. Ø d ±0.05 *See size table. All dimensions are in mm. neW 125°C 275 Vac / 560 Vdc Std dimensions B 5.0 5.0 5.0 5.0 6.0 6.0 5.0 5.0 5.0 5.0 5.0 5.0 6.0 6.0 9.0 7.5 8.5 6.0 9.0 7.5 H 11.0 11.0 11.0 11.0 12.0 12.0 11.0 11.0 11.0 11.0 11.0 11.0 12.0 17.5 12.5 13.5 14.5 17.5 12.5 18.5 16.0 18.5 12.0 19.0 15.0 15.0 16.0 18.5 20.0 22.0 L 13.0 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 26.5 p 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 Ød max dv/dt at 390Vdc (V/ µs) 500 500 500 500 500 500 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 200 200 200 200 200 200 Part number R46 K F 2100 - - H1 R46 K F 2150 - - H1 R46 K F 2220 - - H1 R46 K F 2330 - - H1 R46 K F 2470 - - H1 R46 K F 2680 - - H1 R46 K I R46 K I R46 K I R46 K I R46 K I R46 K I R46 K I R46 K I R46 K I R46 K I R46 K I R46 K I R46 K I R46 K I R46 K I R46 K I R46 K I R46 K I 2100 - - H1 2150 - - H1 2220 - - H1 2330 - - H1 2470 - - H1 2680 - - H1 3100 - - H1 3150 - - H2 3150 - - H3 3150 - - H1 3220 - - H1 3220 - - H2 3220 - - H3 3220 - - H4 3330 - - H1 3330 - - H2 3330 - - H3 3470 - - H1 M M M M M M M - GeneRAl TeCHniCAl dATA dielectric: polypropylene film. Plates: metal layer deposited by evaporation under vacuum. Winding: non-inductive type. leads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. marking: Manufacturer’s logo, series, capacitance, tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant. Climatic category: 40/125/56 IEC 60068-1 operating temperature range: -40 to +125°C Related documents: IEC 60384-14; EN 60384-14 Rated Cap. 0.010 µF 0.015 µF 0.022 µF 0.033 µF 0.047 µF 0.068 µF 0.010 µF 0.015 µF 0.022 µF 0.033 µF 0.047 µF 0.068 µF 0.10 µF 0.15 µF 0.15 µF 0.15 µF 0.22 µF 0.22 µF 0.22 µF 0.22 µF 0.33 µF 0.33 µF 0.33 µF 0.47 µF eleCTRiCAl CHARACTeRiSTiCS Rated voltage (VR): Capacitance range: 275 Vac (50/60Hz) / 560 Vdc 0.01µF to 1µF TeST meTHod And PeRFoRmAnCe endurance: Test conditions Temperature: Test duration: +125°C±2°C 1000 h Voltage applied: 1.25 x VR +1000Vac 0.1 s/h Performance Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |∆C/C|: ≤ 10% Insulation resistance: ≥ 50% of initial limit. APPRoVAlS 10.0 7.5 13.0 11.0 6.0 6.0 7.0 10.0 11.0 13.0 (**) ENEC IEC 60384-14 UL 1414 (up to 1µF, 85°C; 250Vac) CSA - C22.2 No.1 (up to 1µF, 85°C; 250Vac) UL 1283 (310 Vac) CSA - C22.2 No.8 (310 Vac) Class X2 File No.CA08.00063 0.15 µF 0.22 µF 0.33 µF R46 K N 3150 - - H1 R46 K N 3220 - - H1 R46 K N 3330 - - H1 R46 K N 3470 - - H1 R46 K N 3680 - - H1 R46 K N 4100 - - H1 Across-the-line Across-the-line certified for Canada Electromagnetic Interference Filters Electromagnetic Interference Filters certified for Canada File No.E97797 0.47 µF 0.68 µF File No.E97797 1.0 µF File No.E85238 Rated voltage (K=275Vac) Mechanical version and packaging (Table 1) Tolerance: K (±10%); M (±20%) File No.E85238 300Vac available upon request E12 Series available upon request All dimensions are in mm For “capacitor connected in serial with main line” (two - phase and three - phase net) application, please read the “SHoRT GUIDE To CHooSE THE RIGHT FILM CAPACIToRS” and contact our Technical Service for choosing the safest solution. Approved according to IEC 60384-14 According to IEC 60065 (**) ENEC mark has replaced all the following European National marks: 09/2008 154 Loose Fig.1 Taped Fig.2 meTAllized PolYPRoPYlene Film CAPACiToR SELF-HEALING PRoPERTIES Typical applications: This special R46 release is designed for applications in series with the main . PRoDUCT CoDE: R46 X2 CLASS (IEC 60384-14) - MKP Series R.46 S VeRSion Not for new design. Not for use in series with the mains. See www.kemet.com for more information. Pitch Box thickness (B) (mm) (mm) Ø d ±0.05 p ≤15 0.6 or 0.8* 22.5 ≤ p ≤ 27.5 0.8 p = 37.5 1.0 10.0 15.0 15.0 22.5 27.5 37.5 All 0.33µF no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |∆C/C|: ≤10% Insulation resistance: ≥50% of initial limit. Resistance to soldering heat: Test conditions Dielectric strength: * Typical value Solder bath temperature: +260°C ± 5°C Dipping time (with heat screen):10 s ± 1 s Performance Test voltage between terminations (on all pieces): 1500Vac for 1 s + 2200Vdc for 1 s at +25°C±5°C Capacitance change |∆C/C|: ≤2% 155 09/2008 meTAllized PolYPRoPYlene Film CAPACiToR SELF-HEALING PRoPERTIES APPRoVAlS Rated Cap. (*) B 0.010 µF 0.015 µF 0.022 µF 0.033 µF 0.047 µF 0.068 µF 0.10 µF 0.10 µF 0.15 µF 0.15 µF 0.15 µF 0.22 µF 0.22 µF 0.22 µF 0.22 µF 0.33 µF 0.33 µF 0.33 µF 0.33 µF 0.47 µF 0.47 µF 0.56 µF 0.68 µF 0.22 µF 0.33 µF 0.33 µF 0.47 µF 0.47 µF 0.68 µF 1.0 µF 1.0 µF 1.2 µF 0.47 µF 0.68 µF 1.0 µF 1.5 µF 2.2 µF 3.3 µF 4.7 µF 1.5 µF 2.2 µF 2.2 µF 3.3 µF 4.7 µF 4.7 µF 6.8 µF 10.0 µF 5.0 5.0 5.0 5.0 5.0 5.0 5.0 6.0 6.0 7.5 9.0 7.5 8.5 6.0 9.0 13.0 8.5 10.0 7.5 11.0 10.0 11.0 11.0 6.0 6.0 7.0 7.0 8.5 10.0 10.0 11.0 13.0 9.0 9.0 11.0 13.0 13.0 18.0 18.0 11.0 11.0 13.0 16.0 16.0 19.0 20.0 30.0 275 Vac / 560 Vdc Std dimensions H 11.0 11.0 11.0 11.0 11.0 11.0 11.0 12.0 12.0 13.5 12.5 13.5 14.5 17.5 12.5 12.0 14.5 16.0 18.5 19.0 16.0 19.0 19.0 15.0 15.0 16.0 16.0 17.0 18.5 18.5 20.0 22.0 17.0 17.0 20.0 22.0 25.0 33.0 33.0 22.0 22.0 24.0 28.5 28.5 32.0 40.0 45.0 l 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 32.0 32.0 32.0 32.0 32.0 32.0 32.0 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 p 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Ød max dv/dt at 390Vdc (V/ µs) 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 200 200 200 200 200 200 200 200 200 150 150 150 150 150 150 150 100 100 100 100 100 100 100 100 R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KI R46 KN R46 KN R46 KN R46 KN R46 KN R46 KN R46 KN R46 KN R46 KN R46 KR R46 KR R46 KR R46 KR R46 KR R46 KR R46 KR 2100 - - S0 2150 - - S0 2220 - - S0 2330 - - S0 2470 - - S1 2680 - - S0 3100 - - S1 3100 - - S0 3150 - - S1 3150 - - S0 3150 - - S3 3220 - - S1 3220 - - S0 3220 - - S2 3220 - - S3 3330 - - S1 3330 - - S3 3330 - - S0 3330 - - S2 3470 - - S0 3470 - - S1 3560 - - S0 3680 - - S0 3220 - - S0 3330 - - S1 3330 - - S0 3470 - - S1 3470 - - S0 3680 - - S0 4100 - - S2 4100 - - S1 4120 - - S0 3470 - - S0 3680 - - S1 4100 - - S1 4150 - - S1 4220 - - S2 4330 - - S2 4470 - - S2 M M M M M M M M M M M Part number X2 CLASS (IEC60384-14) - MKP Series R.46 S VeRSion Not for new design. Class X2 File No.V4413 (**) ENEC IEC 60384-14 UL 1414 (up to 1µF, 85°C; 250Vac) CSA - C22.2 No.1 (up to 1µF, 85°C; 250Vac) UL 1283 (310 Vac) Across-the-line Across-the-line certified for Canada Electromagnetic Interference Filters Electromagnetic Interference Filters certified for Canada Class X2 File No.E97797 File No.E97797 File No.E85238 CSA - C22.2 No.8 (310 Vac) File No.E85238 GB/T 14472 File CQC03001008199 CQC03001008842 Approved according to IEC 60384-14 According to IEC 60065 Not for use in series with the mains. See www.kemet.com for more information. (**) ENEC mark has replaced all the following European National marks: Table 1 Standard packaging style lead length (mm) AMMo-PACK AMMo-PACK REEL Ø500mm REEL Ø500mm Loose, short leads Loose, long leads Loose, long leads Loose, insulated rigid leads Loose, insulated flexible leads 04 +2 25 -1/+2 30 +5 30 +5 150 ±5 P2 (mm) 12.70 19.05 12.70 19.05 Taping style Fig. (No.) 1 2 1 2 Pitch (mm) 10.0/15.0 22.5 10.0/15.0 22.5/27.5 ordering code (Digit 10 to 11) DQ DQ CK CK 00 50 40 51 52 R46 KW 4150 - - S1 R46 KW 4220 - - S2 R46 KW 4220 - - S1 R46 KW 4330 - - S1 R46 KW 4470 - - S2 R46 KW 4470 - - S1 R46 KW 4680 - - S2 R46 KW 5100 - - S1 Note: Ammo-pack is the preferred packaging for taped version. Rated voltage (K=275Vac) Mechanical version and packaging (Table 1) Tolerance: K (±10%); M (±20%) 300Vac Available upon request E12 Series available upon request All dimensions are in mm 09/2008 156 Loose Taped Fig.1 Fig.2 meTAllized PolYPRoPYlene Film CAPACiToR SELF-HEALING PRoPERTIES Typical applications: interference suppression and «across-the-line» applications. Suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. PRoDUCT CoDE: R46 Capacitors with discharge resistor X2 CLASS (IEC 60384-14) - MKP Series R.46+R Insulated rigid leads Insulated flexible leads 0.5mm2 Pitch Box thickness (B) (mm) (mm) 22.5 27.5 37.5 Ø d ±0.05 P= 22.5 to 27.5 0.8 p = 37.5 1 All All All Maximum dimensions (mm) B max H max L max B +0.2 B +0.2 B +0.3 H +0.1 H +0.1 H +0.1 L +0.3 L +0.3 L +0.3 TeST meTHod And PeRFoRmAnCe damp heat, steady state: Test conditions 1st All dimensions are in mm. GeneRAl TeCHniCAl dATA dielectric: polypropylene film. Plates: metal layer deposited by evaporation under vacuum. Winding: non-inductive type. leads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. marking: Manufacturer ’s logo, series, capacitance, tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant. Climatic category: 40/110/56 IEC 60068-1 Temperature: Relative humidity (RH): Test duration: Performance +40°C ± 2°C 93% ±2% 56 days no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |∆C/C|: ≤5% Insulation resistance: ≥50% of initial limit. endurance: Test conditions Dielectric strength: Temperature: Test duration: Voltage applied: Performance +110°C ± 2°C 1000 h 1.25 x VR +1000Vac 0.1 s/h operating temperature range: -40 to +110°C Related documents: IEC 60384-14, EN 60384-14. eleCTRiCAl CHARACTeRiSTiCS Rated voltage (VR): 275Vac (50/60Hz) / 560 Vdc 300Vac (50/60Hz) / 630 Vdc 0.22µF to 10µF no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |∆C/C|: ≤10% Insulation resistance: ≥50% of initial limit. Resistance to soldering heat: Test conditions Dielectric strength: Capacitance range: Capacitance values: E6 series (IEC 60063 Norm). Capacitance tolerances (measured at 1 kHz): ±10% (K); ±20% (M). dissipation factor (dF): tgδ 10-4 at +25°C ±5°C: Typical value insulation resistance: Test conditions ≤10 (6)* at 1kHz * Solder bath temperature: +260°C ± 5°C Dipping time (with heat screen):10 s ± 1 s Performance Capacitance change |∆C/C|: ≤2% APPRoVAlS ENEC IEC 60384-14 UL 1283 (310Vac-105°C) CSA - C22.2 No.8 (310Vac-105°C) Class X2 File No.V4413 Temperature: Voltage charge time: Voltage charge: Performance ≥1x105 MΩ (5x105 MΩ )* ≥30000 s (150000 s )* +25°C±5°C 1 min 100 Vdc for C≤0.33µF for C>0.33µF Electromagnetic Interference File No.E85238 Filters Electromagnetic Interference File No.E85238 Filters certified for Canada * Typical value Approved according to IEC 60384-14 According to IEC 60065. Not for use in series with the mains. See www.kemet.com for more information. Test voltage between terminations (on all pieces): 157 09/2008 meTAllized PolYPRoPYlene Film CAPACiToR SELF-HEALING PRoPERTIES PRoDUCT CoDE: R46 Not for use in series with the mains. See www.kemet.com for more information. Capacitors with discharge resistor X2 CLASS (IEC 60384-14) - MKP Series R.46+R Rated Cap. (*) 275 Vac / 560 Vdc Std dimensions Ød B 0.22 µF 0.33 µF H L p 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 max dv/dt at 390Vdc (V/ µs) 200 200 200 200 150 150 150 150 150 150 150 100 100 100 100 100 100 Part number Table 1 Standard packaging style lead length (mm) REEL Ø500mm Loose, short leads Loose, long leads Loose, long leads Loose, insulated rigid leads Loose, insulated flexible leads 04 25 -1/+2 30 +5 +2 Taping style P2 (mm) 19.05 Fig. (No.) 2 Pitch (mm) 22.5/27.5 ordering code (Digit 10 to 11) CK 00 50 40 51 52 7.0 16.0 26.5 22.5 8.5 17.0 26.5 22.5 R46KN 3220 - - 01 - x R46KN 3330 - - 01 - x R46KN 3470 - - 01 - x R46KN 3680 - - 01 - x R46KR 3470 - - 01 - x R46KR 3680 - - M1 - x R46KR 4100 - - M1 - x R46KR 4150 - - M1 - x R46KR 4220 - - M1 - x R46KR 4330 - - M2 - x R46KR 4470 - - M1 - x R46KW 4150 - - M1 - x R46KW 4220 - - M1 - x R46KW 4330 - - M1 - x R46KW 4470 - - M1 - x R46KW 4680 - - M2 - x R46KW 5100 - - M1 - x 0.47 µF 10.0 18.5 26.5 22.5 0.68 µF 11.0 20.0 26.5 22.5 0.47 µF 11.0 20.0 32.0 27.5 0.68 µF 11.0 20.0 32.0 27.5 1.0 µF 13.0 22.0 32.0 27.5 1.5 µF 13.0 22.0 32.0 27.5 2.2 µF 14.0 28.0 32.0 27.5 3.3 µF 18.0 33.0 32.0 27.5 4.7 µF 22.0 37.0 32.0 27.5 1.5 µF 11.0 22.0 41.5 37.5 2.2 µF 13.0 24.0 41.5 37.5 3.3 µF 16.0 28.5 41.5 37.5 4.7 µF 19.0 32.0 41.5 37.5 6.8 µF 20.0 40.0 41.5 37.5 10.0 µF 24.0 44.0 41.5 37.5 30 +5 150 ±5 PRodUCT Code SYSTem The part number, comprising 15 digits, is formed as follows: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 R46 Digit 1 to 3 Digit 4 - - Rated voltage (K=275Vac) Mechanical version and packaging (Table 1) Tolerance: K (±10%); M (±20%) Value of discharge resistor (Table 2) Rated Cap. (*) 300 Vac / 630 Vdc Std dimensions Ød B 0.22 µF 0.33 µF H L p 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 max dv/dt at 390Vdc (V/ µs) 200 200 200 200 150 150 150 150 150 150 150 100 100 100 100 100 100 Part number 7.0 16.0 26.5 22.5 8.5 17.0 26.5 22.5 R463N 3220 - - 01 - x R463N 3330 - - 01 - x R463N 3470 - - 01 - x R463N 3680 - - 01 - x R463R 3470 - - 01 - x R463R 3680 - - M1 - x R463R 4100 - - M1 - x R463R 4150 - - M1 - x R463R 4220 - - M1 - x R463R 4330 - - M2 - x R463R 4470 - - M1 - x R463W 4150 - - M1 - x R463W 4220 - - M1 - x R463W 4330 - - M1 - x R463W 4470 - - M1 - x R463W 4680 - - M2 - x R463W 5100 - - M1 - x 0.47 µF 10.0 18.5 26.5 22.5 0.68 µF 11.0 20.0 26.5 22.5 0.47 µF 11.0 20.0 32.0 27.5 0.68 µF 11.0 20.0 32.0 27.5 1.0 µF 13.0 22.0 32.0 27.5 1.5 µF 13.0 22.0 32.0 27.5 2.2 µF 14.0 28.0 32.0 27.5 3.3 µF 18.0 33.0 32.0 27.5 4.7 µF 22.0 37.0 32.0 27.5 1.5 µF 11.0 22.0 41.5 37.5 2.2 µF 13.0 24.0 41.5 37.5 3.3 µF 16.0 28.5 41.5 37.5 4.7 µF 19.0 32.0 41.5 37.5 6.8 µF 20.0 40.0 41.5 37.5 10.0 µF 24.0 44.0 41.5 37.5 Series code. a.c. rated voltage: K = 275Vac; 3 = 300Vac Digit 5 Pitch: N = 22.5; R = 27.5; W = 37.5 mm Digit 6 to 9 Digits 7 - 8 - 9 indicate the first three digits of Capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the Rated Capacitance in pF. Digit 10 to 11 Mechanical version and/or packaging (table 1) Digit 12 Identifies the dimensions and electrical characteristics. Digit 13 Internal use Digit 14 Capacitance tolerance: K=±10%; M=±20% Digit 15 Value of the discharge resistor (tolerance±10%) according to the following table*: Table 2 R 470 kΩ 680 kΩ 1 MΩ 1.2 MΩ 1.5 MΩ 2.2 MΩ 3.3 MΩ 4.7 MΩ 6.8 MΩ 10 MΩ code (x) E F G L N P Q S T V Rated voltage (3=300Vac) Mechanical version and packaging (Table 1) Tolerance: K (±10%); M (±20%) All dimensions are in mm Value of discharge resistor (Table 2) Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applic ations, but are not intended to constitute – and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. *other resistors are avaible upon request.