Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110ºC
Overview
Applications
The R46 Series is constructed of metallized polypropylene
film encapsulated with self-extinguishing resin in a box of
material meeting the requirements of UL 94 V–0.
For worldwide use in electromagnetic interference (EMI)
suppression in across-the-line applications requiring X2
safety classification. Intended for use in situations where
capacitor failure would not result in exposure to electric
shock. Not for use in “series with mains” type applications.
Benefits
• Approvals: ENEC, UL, cUL, CQC
• Class X2 (IEC 60384-14)
• Rated voltage: 275 VAC 50/60 Hz
• Capacitance range: 0.033 – 10 µF
• Lead spacing: 10.0 – 37.5 mm
• Capacitance tolerance: ±20%, ±10%
• Climatic category: 40/110/56, IEC 60068–1
• Tape and reel in accordance with IEC 60286–2
• RoHS Compliant and lead-free terminations
• Operating temperature range of −40˚C to +110˚C
• 100% screening factory test at 2,200 VDC/1,500 VAC
• Self-healing properties
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Part Number System
R46
K
I
3470
00
P0
M
Series
Rated Voltage
(VAC)
Lead Spacing
(mm)
Capacitance
Code (pF)
Packaging
Internal Use
Capacitance
Tolerance
See Ordering
Options Table
P0
P1
P2
P3
X2, Metallized
Polypropylene
K = 275
F = 10.0
I = 15.0
N = 22.5
R = 27.5
W = 37.5
The last three
digits represent
significant figures.
The first digit
specifies number
of zeros to be
added.
K = ±10%
M = ±20%
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 9/27/2016
1
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110ºC
Ordering Options Table
Lead Spacing
Nominal
(mm)
Lead Length
(mm)
Lead and
Packaging Code
4 +2/-0
H0= 18.5 +/-0.5
00
DQ
Tape & Reel (Large Reel)
H0= 18.5 +/-0.5
CK
Bulk (Bag) – Short Leads
2.7 +0.5/-0
JA
Bulk (Bag) – Short Leads
3.5 +0.5/-0
JB
Bulk (Bag) – Short Leads
4.0 +0.5/-0
JE
Bulk (Bag) – Short Leads
3.2 +0.3/-0.2
JH
Bulk (Bag) – Long Leads
18 +1/-1
JM
Bulk (Bag) – Long Leads
30 +5/-0
40
Bulk (Bag) – Long Leads
25 +2/-1
50
Bulk (Bag) – Insulated Rigid Leads
30 +5/-0 (sp 8+2/-2)
51
Bulk (Bag) – Insulated Flexible Leads
150 +5/-5 (sp 8+2/-2)
52
4 +2/-0
H0= 18.5 +/-0.5
00
CK
2.7 +0.5/-0
3.5 +0.5/-0
4.0 +0.5/-0
3.2 +0.3/-0.2
18 +1/-1
30 +5/-0
25 +2/-1
30 +5/-0 (sp 8+2/-2)
150 +5/-5 (sp 8+2/-2)
JA
JB
JE
JH
JM
40
50
51
52
4 +2/-0
00
2.7 +0.5/-0
3.5 +0.5/-0
4.0 +0.5/-0
3.2 +0.3/-0.2
18 +1/-1
30 +5/-0
25 +2/-1
30 +5/-0 (sp 8+2/-2)
150 +5/-5 (sp 8+2/-2)
JA
JB
JE
JH
JM
40
50
51
52
Type of Leads and Packaging
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
Ammo Pack
Other Lead and Packaging Options
10,
15,
22.5
Standard Lead and Packaging Options
27.5
Bulk (Bag) – Short Leads
Tape & Reel (Large Reel)
Other Lead and Packaging Options
Bulk (Bag) – Short Leads
Bulk (Bag) – Short Leads
Bulk (Bag) – Short Leads
Bulk (Bag) – Short Leads
Bulk (Bag) – Long Leads
Bulk (Bag) – Long Leads
Bulk (Bag) – Long Leads
Bulk (Bag) – Insulated Rigid Leads
Bulk (Bag) – Insulated Flexible Leads
Standard Lead and Packaging Options
37.5
Bulk (Bag) – Short Leads
Other Lead and Packaging Options
Bulk (Bag) – Short Leads
Bulk (Bag) – Short Leads
Bulk (Bag) – Short Leads
Bulk (Bag) – Short Leads
Bulk (Bag) – Long Leads
Bulk (Bag) – Long Leads
Bulk (Bag) – Long Leads
Bulk (Bag) – Insulated Rigid Leads
Bulk (Bag) – Insulated Flexible Leads
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 9/27/2016
2
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110ºC
Dimensions – Millimeters
Loose
Insulated Rigid Leads
Insulated Flexible Leads 0.5 mm2
FRONT VIEW
SIDE VIEW
FRONT VIEW
SIDE VIEW
FRONT VIEW
SIDE VIEW
L
B
L
B
L
B
H
H
d
H
LL
p
B
H
d
L
8 ±2
8 ±2
d
150 ±5
35 +0/-5
p
d
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
10.0
10.0
10.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
22.5
22.5
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
4.0
5.0
6.0
5.0
6.0
6.0
7.5
7.5
8.5
9.0
10.0
11.0
6.0
7.0
8.5
10.0
11.0
13.0
9.0
11.0
13.0
14.0
18.0
22.0
11.0
13.0
16.0
19.0
20.0
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.3
+0.3
+0.3
+0.3
+0.3
9.0
11.0
12.0
11.0
12.0
17.5
13.5
18.5
14.5
12.5
16.0
19.0
15.0
16.0
17.0
18.5
20.0
22.0
17.0
20.0
22.0
28.0
33.0
37.0
22.0
24.0
28.5
32.0
40.0
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
13.0
13.0
13.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
26.5
26.5
26.5
26.5
26.5
26.5
32.0
32.0
32.0
32.0
32.0
32.0
41.5
41.5
41.5
41.5
41.5
+0.2
+0.2
+0.2
+0.3
+0.3
+0.3
+0.5
+0.5
+0.5
+0.5
+0.5
+0.5
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1.0
1.0
1.0
1.0
1.0
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
Note: See Ordering Options Table for lead length (LL/H 0) options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 9/27/2016
3
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110ºC
Performance Characteristics
Dielectric
Plates
Winding
Leads
Protection
Related documents
Rated Voltage (VR)
Polypropylene film
Metal layer deposited by evaporation under vacuum
Non-inductive type
Tinned wire
Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94.
IEC 60384-14, EN 60384-14
275 VAC (50/60 Hz), 560 VDC
Capacitance Range
0.033 µF to 10 µF
Capacitance Values
E6 series (IEC 60063) measured @ 1 kHz and +20 ±1°C
Capacitance Tolerance
Temperature Range
Climatic Category
±10%, ±20%
−40ºC to +110°C
40/110/56 IEC 60068-1
Storage time: ≤ 24 months from the date marked on the label package
Average relative humidity per year ≤ 70%
Storage Conditions
RH ≤ 85% for 30 days randomly distributed throughout the year
Dew is absent
Temperature: −40 to 80°C (see "Maximum Humidity in Storage Conditions" graph below)
Approvals
ENEC, UL, cUL, CQC
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 9/27/2016
4
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110ºC
Performance Characteristics cont'd
Dissipation Factor (tanδ)
Test Voltage Between Terminals
≤ 0.1% (0.06%*) @ 1 kHz , +25°C ±5°C (* typical value)
The 100% screening factory test is carried out at 2,200 VDC/1,500 VAC. The voltage level is selected to meet
the requirements in applicable equipment standards. All electrical characteristics are checked after the test.
It is not permitted to repeat this test as there is a risk to damage the capacitor. KEMET is not liable in such
case for any failures.
Measured at +25°C ±5°C, according to IEC 60384–2
Insulation Resistance
Minimum Values Between Terminals
Voltage Charge
Voltage Charge Time
C ≤ 0.33 μF
C > 0.33 μF
1 minute
≥ 1 • 105 MΩ
( ≥ 5 • 105 MΩ )*
≥ 30,000 MΩ • µF
( ≥ 150,000 MΩ • µF )*
100 VDC
In DC Applications
Recommended voltage ≤ 560 VDC
* Typical value
Impedance Graph
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 9/27/2016
5
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110ºC
Environmental Test Data
Test
IEC Publication
Procedure
Endurance
EN/IEC 60384–14
Vibration
IEC 60068–2–6 Test Fc
3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s2
Bump
IEC 60068–2–29 Test Eb
1,000 bumps at 390 m/s2
Change of Temperature
IEC 60068–2–14 Test Na
Upper and lower rated temperature 5 cycles
Active Flammability
IEC 60384–14
VR + 20 surge pulses at 2.5 kV (pulse every 5 seconds)
Passive Flammability
IEC 60384–14
IEC 60384–1, IEC 60695–11–5 Needle flame test
Damp Heat Steady State
IEC 60068–2–78 Test Cab
1.25 x VR VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1
second, 1,000 hours at upper rated temperature
+40°C and 93% RH, 56 days
Approvals
Mark
Specification
File Number
EN/IEC 60384-14
V4413
UL 60384-14 and
CAN/CSA E60384-14
(310VAC)
E97797
IEC 60384-14
CQC08001026549
CQC11001060118
CQC13001087757
CQC14001116028
CQC13001101266
CQC14001116000
Environmental Compliance
All KEMET EMI capacitors are RoHS Compliant.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 9/27/2016
6
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110ºC
Table 1 – Ratings & Part Number Reference
Dimensions in mm
Capacitance
Value (µF)
B
H
0.033
0.047
0.068
0.10
0.10
0.15
0.15
0.22
0.33
0.33
0.33
0.47
0.47
0.47
0.47
0.68
0.68
0.82
0.47
0.56
0.56
0.68
1.0
1.0
1.5
1.5
2.2
1.0
1.5
2.2
3.3
4.7
4.7
6.8
2.2
3.3
4.7
6.8
10.0
4.0
4.0
5.0
5.0
6.0
6.0
5.0
6.0
7.5
9.0
6.0
8.5
9.0
6.0
7.5
10.0
11.0
11.0
6.0
6.0
7.0
7.0
8.5
10.0
10.0
11.0
13.0
9.0
11.0
13.0
14.0
14.0
18.0
22.0
11.0
13.0
16.0
19.0
20.0
9.0
9.0
11.0
11.0
12.0
12.0
11.0
12.0
13.5
12.5
17.5
14.5
12.5
17.5
18.5
16.0
19.0
19.0
15.0
15.0
16.0
16.0
17.0
18.5
18.5
20.0
22.0
17.0
20.0
22.0
28.0
28.0
33.0
37.0
22.0
24.0
28.5
32.0
40.0
Capacitance Value (µF)
B (mm)
H (mm)
L
Lead Spacing
(p)
dV/dt
(V/µs)
New KEMET
Part Number
Legacy Part
Number
13.0
13.0
13.0
13.0
13.0
13.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
32.0
32.0
32.0
32.0
32.0
32.0
32.0
41.5
41.5
41.5
41.5
41.5
10.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
500
500
500
500
500
500
400
400
400
400
400
400
400
400
400
400
400
400
200
200
200
200
200
200
200
200
200
150
150
150
150
150
150
150
100
100
100
100
100
46KF2330(1)P0(2)
46KF2470(1)P0(2)
46KF2680(1)P0(2)
46KF3100(1)P1(3)
46KF3100(1)P0(2)
46KF3150(1)P0(3)
46KI3150(1)P0(2)
46KI3220(1)P0(2)
46KI3330(1)P0(2)
46KI3330(1)P1(2)
46KI3330(1)P2(2)
46KI3470(1)P0(2)
46KI3470(1)P1(3)
46KI3470(1)P2(3)
46KI3470(1)P3(2)
46KI3680(1)P1(3)
46KI3680(1)P0(2)
46KI3820(1)P0(3)
46KN3470(1)P1(2)
46KN3560(1)P1(3)
46KN3560(1)P0(2)
46KN3680(1)P0(2)
46KN4100(1)P1(3)
46KN4100(1)P0(2)
46KN4150(1)P1(3)
46KN4150(1)P0(2)
46KN4220(1)P0(3)
46KR4100(1)P0(2)
46KR4150(1)P0(2)
46KR4220(1)P0(2)
46KR4330(1)P0(2)
46KR4470(1)P1(3)
46KR4470(1)P0(2)
46KR4680(1)P0(2)
46KW4220(1)P0(2)
46KW4330(1)P0(2)
46KW4470(1)P0(2)
46KW4680(1)P0(2)
46KW5100(1)P0(2)
R46KF2330(1)P0(2)
R46KF2470(1)P0(2)
R46KF2680(1)P0(2)
R46KF3100(1)P1(3)
R46KF3100(1)P0(2)
R46KF3150(1)P0(3)
R46KI3150(1)P0(2)
R46KI3220(1)P0(2)
R46KI3330(1)P0(2)
R46KI3330(1)P1(2)
R46KI3330(1)P2(2)
R46KI3470(1)P0(2)
R46KI3470(1)P1(3)
R46KI3470(1)P2(3)
R46KI3470(1)P3(2)
R46KI3680(1)P1(3)
R46KI3680(1)P0(2)
R46KI3820(1)P0(3)
R46KN3470(1)P1(2)
R46KN3560(1)P1(3)
R46KN3560(1)P0(2)
R46KN3680(1)P0(2)
R46KN4100(1)P1(3)
R46KN4100(1)P0(2)
R46KN4150(1)P1(3)
R46KN4150(1)P0(2)
R46KN4220(1)P0(3)
R46KR4100(1)P0(2)
R46KR4150(1)P0(2)
R46KR4220(1)P0(2)
R46KR4330(1)P0(2)
R46KR4470(1)P1(3)
R46KR4470(1)P0(2)
R46KR4680(1)P0(2)
R46KW4220(1)P0(2)
R46KW4330(1)P0(2)
R46KW4470(1)P0(2)
R46KW4680(1)P0(2)
R46KW5100(1)P0(2)
L (mm)
Lead
Spacing (p)
dV/dt (V/µs)
New KEMET
Part Number
Legacy
Part Number
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) M = ±20%, K = ±10%
(3) M = ±20% (only available tolerance).
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 9/27/2016
7
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110ºC
Soldering Process
The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder.
This has increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221ºC for the new alloys. As a
result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave
temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170ºC). Wave
soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm),
and great care has to be taken during soldering. The recommended solder profiles from KEMET should be used. Please consult
KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline
for successful soldering. Please see Figure 1.
Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the
above the recommended limits may result to degradation or permanent damage to the capacitors.
Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert
through-hole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven,
if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended.
Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle.
Manual Soldering Recommendations
Wave Soldering Recommendations
300
Following is the recommendation for manual
soldering with a soldering iron.
2+3s max
260°C
250
First wave
Temperature (°C)
Recommended Soldering Temperature
Soldering iron bit temperature (deg C)
400
350
300
Second wave
200
Cooling
ΔT 15 mm ≤ 15 mm > 15 mm
Polyester
130°C
130°C
130°C
270°C
270°C
Polypropylene
100°C
110°C
130°C
260°C
270°C
Paper
130°C
130°C
140°C
270°C
270°C
Polyphenylene
Sulphide
150°C
150°C
160°C
270°C
270°C
2. The maximum temperature measured inside the capacitor:
Set the temperature so that inside the element the maximum temperature is below the limit:
Dielectric Film Material
Maximum temperature
measured inside the element
Polyester
160°C
Polypropylene
110°C
Paper
160°C
Polyphenylene
sulphide
160°C
Temperature monitored inside the capacitor.
Selective Soldering Recommendations
Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole
components to be soldered is preheated and transported over the solder bath as in normal flow soldering without touching
the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten
solder only at the places of the selected components, and pressed against the lower surface of the board to solder the
components.
The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document,
however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of
overheating is greater than in double wave flow soldering, and great care must be taken so that the parts are not overheated.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 9/27/2016
9
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110ºC
Construction
Molded Plastic
Case
Single-sided Metallized
Polypropylene Film
(First Layer)
Detailed Cross Section
Molded Plastic Self-Extinguishing
Case
Resin
Single-sided Metallized
Polypropylene Film
(Second Layer)
Margin
Margin
Metal Contact
Layer
Metal Contact
Layer
Margin
FILM WINDING SCHEME OPTIONS
Leads
Single-sided Metallized Polypropylene Film
Double-sided
Winding Scheme
Single-sided
Metallized
Polypropylene
Film
1 Section
Single-sided
Metallized
Polypropylene
Film
2 Sections
Single-sided
Metallized
Polypropylene
Film
3 Sections
Double-sided
Metallized
Polyester
Carrier
Film
Polypro
Film Die
1 Section
Single-sided
Metallized
Polypropylene
Film
4 Sections
Metallized
Impregnated Paper
Metallized Polyphenylene
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
Sulfide Film (SMR)
Double-sided
Metallized
Polyester
Carrier
Film
Polyprop
Film Die
3 Sections
F3094_R46_X2_275_110C_MIN • 9/27/2016
10
Polyp
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110ºC
Marking
Lead Spacing 10 mm
FRONT
TOP
Series,
Dielectric
Code, Safety
Class, Self
Healing
Capacitance,
Rated Voltage
Approval
Marks
Manufacturer’s
Logo
IEC Climatic
Category
Capacitance Tolerance
Date Code
Passive Flammability
Category
Manufacturing
Plant
Lead Spacing 15 mm, 22.5 mm (small case sizes)
FRONT
TOP
Series,
Dielectric
Code, Safety
Class, Self
Healing
Capacitance,
Rated Voltage
Approval
Marks
Manufacturer’s
Logo
IEC Climatic
Category
Capacitance Tolerance
Date Code
Passive Flammability
Category:
B for volume ≥ 1750 mm3
C for volume < 1750 mm3
Manufacturing
Plant
Lead Spacing 22.5 mm (large case sizes), 27.5 mm, 37.5 mm
FRONT
TOP
Series Dielectric Safety
Code
Class
Approval
Marks
Manufacturer’s
Logo
IEC Climatic
Category
Passive
Flammability
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
Category
Self
Healing
Capacitance,
Capacitance
Tolerance,
Rated Voltage
QA Number
Manufacturing Date Code
F3094_R46_X2_275_110C_MIN
• 9/27/2016
Plant
11
Manufacturing
Plant
Passive Flammability
Category:Capacitors
Metallized Polypropylene Film EMI Suppression
B for volume ≥ 1750 mm3
R46 (Miniature) Series, Class X2,
275volume
VAC, 110ºC
C for
< 1750 mm3
Marking cont'd
Lead Spacing 22.5 mm (large case sizes), 27.5 mm, 37.5 mm
FRONT
TOP
Series Dielectric Safety
Code
Class
Self
Healing
Capacitance,
Capacitance
Tolerance,
Rated Voltage
Manufacturer’s
Logo
Approval
Marks
IEC Climatic
Category
QA Number
Passive
Flammability
Category
Manufacturing
Plant
Date Code
Manufacturing Date Code (IEC 60062)
Y = Year, Z = Month
Year
Code
Month
Code
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
M
N
P
R
S
T
U
V
W
X
A
B
C
D
E
F
H
J
K
L
M
January
February
March
April
May
June
July
August
September
October
November
December
1
2
3
4
5
6
7
8
9
O
N
D
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 9/27/2016
12
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110ºC
Packaging Quantities
Lead Spacing
(mm)
Thickness
(mm)
Height
(mm)
Length
(mm)
Bulk
Short Leads
Bulk
Long Leads
Standard
Reel
ø 355 mm
Large Reel
ø 500 mm
Ammo
Taped
10
4
5
6
9
11
12
13
13
13
2000
1300
1000
1800
1500
1200
750
600
500
1500
1250
1000
1000
800
680
15
5
6
6
7.5
7.5
8.5
9
10
11
11
12
17.5
13.5
18.5
14.5
12.5
16
19
18
18
18
18
18
18
18
18
18
2000
1750
1000
1000
900
1000
1000
750
450
1000
900
700
700
500
500
520
500
350
600
500
500
350
–
300
270
300
–
1250
1000
1000
800
800
700
650
600
500
800
680
680
500
500
440
410
380
340
22.5
6
7
8.5
10
11
13
15
16
17
18.5
20
22
26.5
26.5
26.5
26.5
26.5
26.5
805
700
468
396
360
300
500
500
300
300
250
200
–
–
–
–
–
–
700
550
450
350
350
300
464
380
280
235
217
–
27.5
9
11
13
14
18
22
22
17
20
22
28
33
37
37
32
32
32
32
32
32
32
816
560
480
352
256
168
168
408
336
288
176
128
112
112
–
–
–
–
–
–
–
450
350
300
–
–
–
–
–
–
–
–
–
–
–
37.5
11
13
16
19
20
22
24
28.5
32
40
41.5
41.5
41.5
41.5
41.5
420
360
216
192
126
252
216
108
96
84
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 9/27/2016
13
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110ºC
Lead Taping & Packaging (IEC 60286–2)
Figure 1
Lead Spacing 10 mm
Figure 2
Lead Spacing 15 mm
Figure 3
Lead Spacing 22.5 – 27.5 mm
P
W2
P2
ød
W
W0
W1
H0
P1 P0
F
P
h
h
D0
t
P1
P2
Taping Specification
Dimensions (mm)
Description
Symbol
10
Fig. 1
Lead Space
15
22.5
Fig. 2
Fig. 3
27.5
Fig. 3
Tol.
Lead wire diameter
d
0.6
0.6 – 0.8
0.8
0.8
±0.05
Taping lead space
P
25.4
25.4
38.1
38.1
±1
Feed hole lead space *
P0
12.7
12.7
12.7
12.7
±0.2 **
Centering of the lead wire
P1
7.7
5.2
7.8
5.3
±0.7
Centering of the body
P2
12.7
12.7
19.05
19.05
±1.3
Lead spacing (pitch) ***
F
10
15
22.5
27.5
+0.6/−0.1
Component alignment
∆h
0
0
0
0
±2
Height of component
from tape center
H 0 ****
18.5
18.5
18.5
18.5
±0.5
Carrier tape width
W
18
18
18
18
+1/−0.5
Hold down tape width
W0
9
10
10
10
Minimum
Hole position
W1
9
9
9
9
±0.5
Hold down tape position
W2
3
3
3
3
Maximum
Feed hole diameter
D0
4
4
4
4
±0.2
Tape thickness
t
0.7
0.7
0.7
0.7
±0.2
* Also available in 15 mm.
** Max 1 mm on 20 lead spaces.
*** Pitches 15 mm and 10 mm taped to 7.5 mm (crimped leads) available upon request.
**** H0 = 16.5 mm available upon request.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 9/27/2016
14
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110ºC
Lead Taping & Packaging (IEC 60286–2) cont'd
Ammo Specifications
Dimensions (mm)
H
W
T
360
340
59
H
T
W
Reel Specifications
Reel Size
Standard
Large
Dimensions (mm)
D
H
W
355
500
30
25
55 Maximum
D
H
W
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 9/27/2016
15
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110ºC
KEMET Electronic Corporation Sales Offices
For a complete list of our global sales offi ces, please visit www.kemet.com/sales.
Disclaimer
All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no
obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or
property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 9/27/2016
16