R474F210000A1M

Metallized Polypropylene Film EMI Suppression Capacitors R47, Class X1, 440 VAC, 110°C (Automotive Grade) Overview Applications The R47 is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material meeting the requirements of UL 94 V–0. For use as a electromagnetic interference (EMI) suppression filter in across-the-line applications requiring X1 safety classification. Intended for use in situations where exposure to a shock in the event of capacitor failure is not possible. X1 classified capacitors are for use only in a permanently connected apparatus with a connection to mains which cannot be loosened without the use of a tool. Automotive Grade devices meet the demanding Automotive Electronics Council's AEC–Q200 qualification requirements. Benefits • Approvals: ENEC, UL, cUL • Class X1 (IEC 60384-14) • THB Grade IB • Rated voltage: 440 VAC 50/60 Hz • Capacitance range: 0.0047 – 2.2 µF • Lead spacing: 10.0 – 37.5 mm • Capacitance tolerance: ±20%, ±10% • Climatic category: 40/110/56, IEC 60068–1 • Tape and reel in accordance with IEC 60286–2 • RoHS Compliant and lead-free terminations • Operating temperature range of -40˚C to +110˚C • 100% screening factory test at 2,700 VDC/1,700 VAC • Self-healing properties • Automotive (AEC–Q200) grade Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality Part Number System R47 4 I 2100 00 A1 M V057 Series Rated Voltage (VAC) Lead Spacing (mm) Capacitance Code (pF) Packaging Internal Use Capacitance Tolerance C-Spec X1, Metallized Polypropylene 4 = 440 F = 10.0 I = 15.0 N = 22.5 R = 27.5 W = 37.5 The last three digits represent significant figures. The first digit specifies number of zeros to be added. See Ordering Options Table A1 A2 A3 K = ±10% M = ±20% V057 = Standard (Grade IB and AEC-Q200) Built Into Tomorrow © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3097_R47_X1_440 • 12/4/2020 1 Metallized Polypropylene Film EMI Suppression Capacitors R47, Class X1, 440 VAC, 110ºC (Automotive Grade) Ordering Options Table Lead Spacing Nominal (mm) Lead Length (mm) Lead and Packaging Code 4 +2/−0 H0= 18.5 ±0.5 00 DQ Tape & Reel (Large Reel) H0= 18.5 ±0.5 CK Bulk (Bag) – Short Leads 3.5 +0.5/−0 JB Bulk (Bag) – Short Leads 4.0 +0.5/−0 JE Bulk (Bag) – Short Leads 3.2 +0.3/−0 JH Bulk (Bag) – Long Leads 18 ±1 JM Bulk (Bag) – Long Leads 30 +5/−0 40 Bulk (Bag) – Long Leads 25 +2/−1 50 4 +2/−0 H0= 18.5 ±0.5 00 CK1 3.5 +0.5/−0 4.0 +0.5/−0 3.2 +0.3/−0 18 ±1 30 +5/−0 25 +2/−1 JB JE JH JM 40 50 4 +2/−0 00 2.7 +0.5/−0 3.5 +0.5/−0 4.0 +0.5/−0 3.2 +0.3/−0 18 ±1 30 +5/−0 25 +2/−1 JA JB JE JH JM 40 50 Type of Leads and Packaging Standard Lead and Packaging Options Bulk (Bag) – Short Leads Ammo Pack Other Lead and Packaging Options 10, 15, 22.5 Standard Lead and Packaging Options Bulk (Tray)–Short Leads Tape & Reel (Large Reel) Other Lead and Packaging Options 27.5 Bulk (Tray)–Short Leads Bulk (Tray)–Short Leads Bulk (Tray)–Short Leads Bulk (Tray)–Long Leads Bulk (Tray)–Long Leads Bulk (Tray)–Long Leads Standard Lead and Packaging Options Bulk (Tray)–Short Leads Other Lead and Packaging Options 37.5 1 Bulk (Tray)–Short Leads Bulk (Tray)–Short Leads Bulk (Tray)–Short Leads Bulk (Tray)–Short Leads Bulk (Tray)–Long Leads Bulk (Tray)–Long Leads Bulk (Tray)–Long Leads Not for all sizes, see "Packaging Quantities" table © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3097_R47_X1_440 • 12/4/2020 2 Metallized Polypropylene Film EMI Suppression Capacitors R47, Class X1, 440 VAC, 110ºC (Automotive Grade) Dimensions – Millimeters Loose Taped L T H H0 S LL F P2 P2 S T H P2 L F Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 ± 0.4 ± 0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 4.0 5.0 6.0 5.0 6.0 6.0 7.5 7.5 8.5 9.0 10.0 11.0 13.0 6.0 6.5 7.0 8.5 10.0 11.0 13.0 9.0 11.0 13.0 14.0 18.0 22.0 11.0 13.0 16.0 19.0 20.0 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.7 +0.2/−0.7 +0.2/−0.7 +0.2/−0.7 +0.2/−0.7 +0.2/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 9.0 11.0 12.0 11.0 12.0 17.5 13.5 18.5 14.5 12.5 16.0 19.0 12.0 15.0 13,5 16.0 17.0 18.5 20.0 22.0 17.0 20.0 22.0 28.0 33.0 37.0 22.0 24.0 28.5 32.0 40.0 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 26.5 26.5 32.0 32.0 32.0 32.0 32.0 32.0 41.5 41.5 41.5 41.5 41.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.5/−0.5 +0.5/−0.5 +0.5/−0.5 +0.5/−0.5 +0.5/−0.5 +0.5/−0.5 +0.5/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 Note: See Ordering Options Table for lead length (LL/H 0) options. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3097_R47_X1_440 • 12/4/2020 3 Metallized Polypropylene Film EMI Suppression Capacitors R47, Class X1, 440 VAC, 110ºC (Automotive Grade) Performance Characteristics Dielectric Plates Winding Leads Protection Related documents Rated Voltage (VR) Recommended DC Voltage Polypropylene film Metal layer deposited by evaporation under vacuum Non-inductive type Tinned wire Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94. IEC 60384-14, EN 60384-14 440 VAC (50/60 Hz) 1,000 VDC Capacitance Range 0.0047 – 2.2 µF Capacitance Values E6/E12 series (IEC 60063) Capacitance Tolerance Temperature Range Climatic Category ±10%, ±20% −40° to +110°C 40/110/56 IEC 60068-1 Storage time: ≤ 24 months from the date marked on the label package Average relative humidity per year ≤ 70% Storage Conditions RH ≤ 85% for 30 days randomly distributed throughout the year Dew is absent Temperature: −40 to 80°C (see "Maximum Humidity in Storage Conditions" graph below) Approvals Dissipation Factor (tanδ) at 1 kHz Test Voltage Between Terminals ENEC, UL, cUL Maximum Values at +25°C ±5°C Pitch = 10 mm Pitch ≥ 15 mm 0.8% 0.3% (Typical: 0.2%) The 100% screening factory test is carried out at 2,700 VDC/1,700 VAC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. It is not permitted to repeat this test as there is a risk to damage the capacitor. KEMET is not liable in such case for any failures. Measured at +25°C ±5°C, according to IEC 60384–2 Insulation Resistance Minimum Values Between Terminals Voltage Charge Voltage Charge Time C ≤ 0.33 μF C > 0.33 μF 100 VDC 1 minute ≥ 1 • 105 MΩ ≥ 30,000 MΩ • µF © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3097_R47_X1_440 • 12/4/2020 4 Metallized Polypropylene Film EMI Suppression Capacitors R47, Class X1, 440 VAC, 110ºC (Automotive Grade) Performance Characteristics cont. Maximum Humidity in Storage Condition Maximum Overtemperature ∆Tlim vs Th 25 Relative Humidity (%) 20 ∆Tlim (°C) 15 10 30 Days Annual Average 5 120 110 100 Temperature Th(°C) 90 80 70 0 60 Temperature (°C) 80 50 60 40 40 30 20 20 0 10 −20 0 100 90 80 70 60 50 40 30 20 10 0 −40 Maximum Irms vs. Th 120% Maximum Irms 100% 80% 60% 40% 20% 0% 25 35 45 55 65 75 85 95 105 115 Temperature Th(°C) Qualification Automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AEC–Q200, Stress Test Qualification for Passive Components. For additional information regarding the Automotive Electronics Council and AEC–Q200, please visit their website at www.aecouncil.com. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3097_R47_X1_440 • 12/4/2020 5 Metallized Polypropylene Film EMI Suppression Capacitors R47, Class X1, 440 VAC, 110ºC (Automotive Grade) Impedance Graph Environmental Test Data Test IEC Publication Endurance EN/IEC 60384–14 Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s2 Bump IEC 60068–2–29 Test Eb 1,000 bumps at 390 m/s2 Change of Temperature IEC 60068–2–14 Test Na Upper and lower rated temperature 5 cycles Active Flammability IEC 60384–14 VR +20 surge pulses at 4 kV (pulse every 5 seconds) Passive Flammability IEC 60384–14 IEC 60384–1, IEC 60695–11–5 Needle flame test Damp Heat Steady State IEC 60068–2–78 Test Cab Biased Humidity MIL–STD–202 Method 103 THB Test © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Procedure 1.25 x VR VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1 second, 1,000 hours at upper rated temperature +40°C and 93% RH, 56 days 1,000 hours 40°C/93%RH. Rated Voltage. Measurement at 24 ±2 hours after test conclusion. 85°C, 85% RH and 440 VAC, 168 hours Capacitance change (∆C/C): ≤ 10% Dissipation factor change (Δtanδ): ≤ 150 * 10−4 (at 1 kHz for Cap > 1 µF) Dissipation factor change (Δtanδ): ≤ 240 * 10−4 (at 10 kHz for Cap ≤ 1 µF) IR ≥ 50% of initial limit or minimum 200 MΩ F3097_R47_X1_440 • 12/4/2020 6 Metallized Polypropylene Film EMI Suppression Capacitors R47, Class X1, 440 VAC, 110ºC (Automotive Grade) Approvals Certification Body Mark Specification File Number IMQ S.p.A. EN/IEC 60384-14 CA08.00101 UL UL 60384-14 and CAN/CSA E60384-14 (440 VAC) E97797 Environmental Compliance All KEMET EMI capacitors are RoHS Compliant. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3097_R47_X1_440 • 12/4/2020 7 Metallized Polypropylene Film EMI Suppression Capacitors R47, Class X1, 440 VAC, 110ºC (Automotive Grade) Table 1 – Ratings & Part Number Reference Dimensions in mm Capacitance Value (µF) T H 0.0047 0.0068 0.0082 0.010 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.047 0.047 0.056 0.068 0.068 0.068 0.082 0.10 0.047 0.068 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 4.0 5.0 6.0 6.0 5.0 5.0 5.0 5.0 6.0 6.0 6.0 7.5 7.5 6.0 9.0 8.5 10.0 7.5 13.0 10.0 11.0 6.0 6.0 7.0 8.5 10.0 10.0 11.0 13.0 13.0 9.0 9.0 9.0 9.0 11.0 11.0 13.0 13.0 14.0 18.0 18.0 18.0 22.0 11.0 11.0 13.0 16.0 16.0 19.0 19.0 20.0 20.0 9.0 11.0 12.0 12.0 11.0 11.0 11.0 11.0 12.0 12.0 12.0 13.5 13.5 17.5 12.5 14.5 16.0 18.5 12.0 16.0 19.0 15.0 15.0 16.0 17.0 18.5 18.5 20.0 22.0 22.0 17.0 17.0 17.0 17.0 20.0 20.0 22.0 22.0 28.0 33.0 33.0 33.0 37.0 22.0 22.0 24.0 28.5 28.5 32.0 32.0 40.0 40.0 Capacitance Value (µF) T (mm) H (mm) L Lead Spacing (S) dV/dt (V/µs) KEMET Part Number Customer Part Number 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 750 750 750 750 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 300 300 300 300 300 300 300 300 300 225 225 225 225 225 225 225 225 225 225 225 225 225 150 150 150 150 150 150 150 150 150 474F1470(1)A1(2) V057 474F1680(1)A1(2) V057 474F1820(1)A1(2) V057 474F2100(1)A1(2) V057 474I2100(1)A1(2) V057 474I2120(1)A1(2) V057 474I2150(1)A1(2) V057 474I2180(1)A1(2) V057 474I2220(1)A1(2) V057 474I2270(1)A1(2) V057 474I2330(1)A1(2) V057 474I2390(1)A1(2) V057 474I2470(1)A1(2) V057 474I2470(1)A2(2) V057 474I2470(1)A3(2) V057 474I2560(1)A1(2) V057 474I2680(1)A1(2) V057 474I2680(1)A2(2) V057 474I2680(1)A3(2) V057 474I2820(1)A1(2) V057 474I3100(1)A1(2) V057 474N2470(1)A1(2) V057 474N2680(1)A1(2) V057 474N3100(1)A1(2) V057 474N3120(1)A1(2) V057 474N3150(1)A1(2) V057 474N3180(1)A1(2) V057 474N3220(1)A1(2) V057 474N3270(1)A1(2) V057 474N3330(1)A1(2) V057 474R3150(1)A1(2) V057 474R3180(1)A1(2) V057 474R3220(1)A1(2) V057 474R3270(1)A2(2) V057 474R3330(1)A2(2) V057 474R3390(1)A1(2) V057 474R3470(1)A1(2) V057 474R3560(1)A1(2) V057 474R3680(1)A1(2) V057 474R3820(1)A1(2) V057 474R4100(1)A1(2) V057 474R4120(1)A1(2) V057 474R4150(1)A1(2) V057 474W3470(1)A1(2) V057 474W3560(1)A1(2) V057 474W3680(1)A1(2) V057 474W3820(1)A1(2) V057 474W4100(1)A1(2) V057 474W4120(1)A1(2) V057 474W4150(1)A1(2) V057 474W4180(1)A1(2) V057 474W4220(1)A1(2) V057 R474F1470(1)A1(2) V057 R474F1680(1)A1(2) V057 R474F1820(1)A1(2) V057 R474F2100(1)A1(2) V057 R474I2100(1)A1(2) V057 R474I2120(1)A1(2) V057 R474I2150(1)A1(2) V057 R474I2180(1)A1(2) V057 R474I2220(1)A1(2) V057 R474I2270(1)A1(2) V057 R474I2330(1)A1(2) V057 R474I2390(1)A1(2) V057 R474I2470(1)A1(2) V057 R474I2470(1)A2(2) V057 R474I2470(1)A3(2) V057 R474I2560(1)A1(2) V057 R474I2680(1)A1(2) V057 R474I2680(1)A2(2) V057 R474I2680(1)A3(2) V057 R474I2820(1)A1(2) V057 R474I3100(1)A1(2) V057 R474N2470(1)A1(2) V057 R474N2680(1)A1(2) V057 R474N3100(1)A1(2) V057 R474N3120(1)A1(2) V057 R474N3150(1)A1(2) V057 R474N3180(1)A1(2) V057 R474N3220(1)A1(2) V057 R474N3270(1)A1(2) V057 R474N3330(1)A1(2) V057 R474R3150(1)A1(2) V057 R474R3180(1)A1(2) V057 R474R3220(1)A1(2) V057 R474R3270(1)A2(2) V057 R474R3330(1)A2(2) V057 R474R3390(1)A1(2) V057 R474R3470(1)A1(2) V057 R474R3560(1)A1(2) V057 R474R3680(1)A1(2) V057 R474R3820(1)A1(2) V057 R474R4100(1)A1(2) V057 R474R4120(1)A1(2) V057 R474R4150(1)A1(2) V057 R474W3470(1)A1(2) V057 R474W3560(1)A1(2) V057 R474W3680(1)A1(2) V057 R474W3820(1)A1(2) V057 R474W4100(1)A1(2) V057 R474W4120(1)A1(2) V057 R474W4150(1)A1(2) V057 R474W4180(1)A1(2) V057 R474W4220(1)A1(2) V057 L (mm) Lead Spacing (S) dV/dt (V/µs) KEMET Part Number Customer Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (2) M = ±20%, K = ±10% © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3097_R47_X1_440 • 12/4/2020 8 Metallized Polypropylene Film EMI Suppression Capacitors R47, Class X1, 440 VAC, 110ºC (Automotive Grade) Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183°C for SnPb eutectic alloy to 217 – 221°C for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170°C). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm), and great care has to be taken during soldering. The recommended solder profiles from KEMET should be used. Please consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. Please see Figure 1. Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the above the recommended limits may result to degradation or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through-hole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle. Wave Soldering Recommendations Manual Soldering Recommendations The following is the recommendation for manual soldering with a soldering iron. 300 Second Wave First Wave Recommended Soldering Temperature Temperature (°C) 200 400 350 Soldering Iron Bit Temperature (°C) 2+3 seconds max 260°C 250 300 ∆ T < 150°C Cooling Preheating 150 ca. 2°C/second ca. 3.5°C/second typical ca. 5°C/second Tpreheat 100 Typical 250 50 200 150 0 100 0 40 80 120 160 200 240 Time (seconds) 50 0 0 1 2 3 4 5 6 7 8 Soldering Time (seconds) The soldering iron tip temperature should be set at 350°C (+10°C maximum) with the soldering duration not to exceed more than 3 seconds. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3097_R47_X1_440 • 12/4/2020 9 Metallized Polypropylene Film EMI Suppression Capacitors R47, Class X1, 440 VAC, 110ºC (Automotive Grade) Soldering Process cont. Wave Soldering Recommendations cont. 1. The table indicates the maximum set-up temperature of the soldering process Figure 1 Dielectric Film Material Maximum Preheat Temperature Maximum Peak Soldering Temperature Capacitor Capacitor Capacitor Capacitor Pitch Pitch Pitch Pitch ≤ 15 mm > 15 mm ≤ 15 mm > 15 mm Polyester 130°C 130°C 270°C 270°C Polypropylene 110°C 130°C 260°C 270°C Paper 130°C 140°C 270°C 270°C Polyphenylene Sulphide 150°C 160°C 270°C 270°C 2. The maximum temperature measured inside the capacitor: Set the temperature so that inside the element the maximum temperature is below the limit: Dielectric Film Material Maximum temperature measured inside the element Polyester 160°C Polypropylene 110°C Paper 160°C Polyphenylene sulphide 160°C Temperature monitored inside the capacitor. Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as in normal flow soldering without touching the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected components, and pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document, however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than in double wave flow soldering, and great care must be taken so that the parts are not overheated. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3097_R47_X1_440 • 12/4/2020 10 Metallized Polypropylene Film EMI Suppression Capacitors R47, Class X1, 440 VAC, 110ºC (Automotive Grade) Mounting Resistance to Vibration and Mechanical Shock AEC-Q200 Mechanical Stress Tests: Mechanical Shock Vibration MIL-SDT-202 Method 213 Test condition C Peak value 100 g, duration 6 ms, half-sine-wave (see MIL-HDBK for details) MIL-SDT-202 Method 204 5 g for 20 minutes, 12 cycles each of 3 orientations Use 8"X5" PCB, 0.031" thick. 7 secure points on one 8" side and 2 secure points at corners of opposite sides. Parts mounted within 2" from any secure point. Test from 10 – 2,000 Hz. The capacitors are designed for PCB mounting. The stand-off pipes must be in good contact with the printed circuit board. The capacitors with pitch ≤ 22.5 mm can be mechanically fixed by the leads, for pitch > 22.5 mm, the capacitor body has to be properly fixed (e.g. clamped or glued). Construction 2 Sections Molded Plastic Case Detailed Cross Section Molded Plastic Self-Extinguishing Case Resin Single-sided Metallized Polypropylene Film (Second Layer) Margin Margin Metal Contact Layer Metal Contact Layer FILM WINDING SCHEME OPTIONS Margin LeadsDouble-sided Metallized Polyester Film etallized Polypropylene Film Winding Scheme sided lized pylene m sided lized pylene Single-sided Metallized Polypropylene Film (First Layer) Single-sided Metallized Polypropylene Film Double-sided Metallized Polypropylene Polyester Carrier Film Dielectric Film Double-sided Metallized Polyester Carrier Film 2 Sections © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Double-sided Single-sided Metallized Metallized Polyester Polypropylene 2 Sections 1 Section F3097_R47_X1_440 • 12/4/2020 Double-sided Metallized Polypropylene Polyester Carrier Film Dielectric Film 11 Metallized Polypropylene Film EMI Suppression Capacitors R47, Class X1, 440 VAC, 110ºC (Automotive Grade) Marking Lead Spacing 10 mm FRONT TOP Capacitance Tolerance Approval Marks Series, Dielectric Code, Safety Class, Self Healing Manufacturer’s Logo Rated Voltage, T-Series Capacitance Date Code IEC Climatic Category Passive Flammability Category NOTE: Hot imprinting with or without color or ink jet or laser marking Manufacturing Plant Lead Spacing 15 mm, 22.5 mm (small case sizes) FRONT TOP Capacitance Tolerance Approval Marks Series, Dielectric Code, Safety Class, Self Healing Manufacturer’s Logo Rated Voltage, T-Series Capacitance Date Code IEC Climatic Category Passive Flammability Category: B for volume ≥ 1750 mm3 C for volume < 1750 mm3 Manufacturing Plant NOTE: Hot imprinting with or without color or ink jet or laser marking * Differences caused by technology (clichee, laser or ink jet) and production line Lead Spacing 22.5 and 27.5 mm (alternatives*) and 37.5 mm FRONT TOP Dielectric Code Safety Class Self Healing Capacitance, Capacitance Tolerance, Rated Voltage, T-Series QA Number Series Approval Marks Manufacturer’s Logo IEC Climatic Category Passive Flammability Category © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Date Code F3097_R47_X1_440 • 12/4/2020 Manufacturing Plant 12 T-Series Date Code Manufacturing Plant IEC Climatic Category Metallized Polypropylene Film EMI Suppression Capacitors Passive Flammability R47, Class X1, 440 VAC, 110ºC (Automotive Grade) Category: B for volume ≥ 1750 mm3 C for volume < 1750 mm3 NOTE: Hot imprinting with or without color or ink jet or laser marking Marking cont. Lead Spacing 22.5 and 27.5 mm (alternatives*) and 37.5 mm FRONT TOP Dielectric Code Safety Class Self Healing Capacitance, Capacitance Tolerance, Rated Voltage, T-Series QA Number Series Manufacturer’s Logo Approval Marks IEC Climatic Category Passive Flammability Category Date Code Manufacturing Plant * Differences caused by technology (clichee, laser or ink jet) and production line Manufacturing Date Code (IEC 60062) Year Code Month Code 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 A B C D E F H J K L M N P R S T U V W X A January February March April May June July August September October November December 1 2 3 4 5 6 7 8 9 O N D © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3097_R47_X1_440 • 12/4/2020 13 Metallized Polypropylene Film EMI Suppression Capacitors R47, Class X1, 440 VAC, 110ºC (Automotive Grade) Packaging Quantities Lead Spacing (mm) Thickness (mm) Height (mm) Length (mm) Bulk Short Leads Bulk Long Leads Standard Reel ø 355 mm Large Reel ø 500 mm Ammo Taped 10 4.0 5.0 6.0 9.0 11.0 12.0 13.0 13.0 13.0 2,000 1,300 1,000 1,800 1,500 1,200 750 600 500 1,500 1,250 1,000 1,000 800 680 15 5.0 6.0 6.0 7.5 7.5 8.5 9.0 10.0 11.0 13.0 11.0 12.0 17.5 13.5 18.5 14.5 12.5 16.0 19.0 12.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 2,000 1,750 1,000 1,000 900 1,000 1,000 750 450 750 1,000 900 700 700 500 500 520 500 350 490 600 500 500 350 300 270 300 200 1,250 1,000 1,000 800 800 700 650 600 500 480 800 680 680 500 500 440 410 380 340 280 22.5 6.0 6.5 7.0 8.5 10.0 11.0 13.0 15.0 13.5 16.0 17.0 18.5 20.0 22.0 26.5 26.5 26.5 26.5 26.5 26.5 26.5 805 800 700 468 396 360 300 500 – 500 300 300 250 200 – – – – – – – 700 – 550 450 350 350 300 464 – 380 280 235 217 – 27.5 9.0 11.0 13.0 14.0 18.0 22.0 22.0 17.0 20.0 22.0 28.0 33.0 37.0 37.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 816 560 480 352 256 168 168 408 336 288 176 128 112 112 – – – – – – – 450 350 300 – – – – – – – – – – – 37.5 11.0 13.0 16.0 19.0 20.0 22.0 24.0 28.5 32.0 40.0 41.5 41.5 41.5 41.5 41.5 420 360 216 192 126 252 216 108 96 84 – – – – – – – – – – – – – – – © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3097_R47_X1_440 • 12/4/2020 14 Metallized Polypropylene Film EMI Suppression Capacitors R47, Class X1, 440 VAC, 110ºC (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) Figure 1 Lead Spacing 10 mm Figure 2 Lead Spacing 15 mm Figure 3 Lead Spacing 22.5 – 27.5 mm P W2 P2 ød A B W W0 W1 H0 P1 P0 F P h h D0 P1 P2 A-B t Taping Specification Dimensions (mm) Description Symbol 10 Fig. 1 Lead Space 15 22.5 Fig. 2 Fig. 3 27.5 Fig. 3 Tol. Lead wire diameter d 0.6 0.6–0.8 0.8 0.8 ±0.05 Taping lead space P 25.4 25.4 38.1 38.1 ±1 Feed hole lead space * P0 12.7 12.7 12.7 12.7 ±0.2 ** Centering of the lead wire P1 7.7 5.2 7.8 5.3 ±0.7 Centering of the body P2 12.7 12.7 19.05 19.05 ±1.3 Lead spacing (pitch) *** F 10 15 22.5 27.5 +0.6/−0.1 Component alignment ∆h 0 0 0 0 ±2 Height of component from tape center H 0 **** 18.5 18.5 18.5 18.5 ±0.5 Carrier tape width W 18 18 18 18 +1/−0.5 Hold down tape width W0 9 10 10 10 Minimum Hole position W1 9 9 9 9 ±0.5 Hold down tape position W2 3 3 3 3 Maximum Feed hole diameter D0 4 4 4 4 ±0.2 Total tape thickness t 0.7 0.7 0.7 0.7 ±0.2 * 15 mm also available ** Maximum of 1 mm on 20 lead spaces *** Pitches 15 mm and 10 mm taped to 7.5 mm (crimped leads) available upon request **** H0 = 16.5 mm is available upon request © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3097_R47_X1_440 • 12/4/2020 15 Metallized Polypropylene Film EMI Suppression Capacitors R47, Class X1, 440 VAC, 110ºC (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) cont. Ammo Specifications Dimensions (mm) H W T 360 340 59 H T W Reel Specifications Reel Size Standard Large Dimensions (mm) D H W 355 500 30 25 55 Maximum D H W © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3097_R47_X1_440 • 12/4/2020 16 Metallized Polypropylene Film EMI Suppression Capacitors R47, Class X1, 440 VAC, 110ºC (Automotive Grade) KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3097_R47_X1_440 • 12/4/2020 17