Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X1, 440 VAC, 110°C
(Automotive Grade)
Overview
Applications
The R47 is constructed of metallized polypropylene film
encapsulated with self-extinguishing resin in a box of
material meeting the requirements of UL 94 V–0.
For use as a electromagnetic interference (EMI) suppression
filter in across-the-line applications requiring X1 safety
classification. Intended for use in situations where exposure
to a shock in the event of capacitor failure is not possible.
X1 classified capacitors are for use only in a permanently
connected apparatus with a connection to mains which
cannot be loosened without the use of a tool.
Automotive Grade devices meet the demanding Automotive
Electronics Council's AEC–Q200 qualification requirements.
Benefits
• Approvals: ENEC, UL, cUL
• Class X1 (IEC 60384-14)
• THB Grade IB
• Rated voltage: 440 VAC 50/60 Hz
• Capacitance range: 0.0047 – 2.2 µF
• Lead spacing: 10.0 – 37.5 mm
• Capacitance tolerance: ±20%, ±10%
• Climatic category: 40/110/56, IEC 60068–1
• Tape and reel in accordance with IEC 60286–2
• RoHS Compliant and lead-free terminations
• Operating temperature range of -40˚C to +110˚C
• 100% screening factory test at 2,700 VDC/1,700 VAC
• Self-healing properties
• Automotive (AEC–Q200) grade
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Part Number System
R47
4
I
2100
00
A1
M
V057
Series
Rated Voltage
(VAC)
Lead Spacing
(mm)
Capacitance
Code (pF)
Packaging
Internal
Use
Capacitance
Tolerance
C-Spec
X1, Metallized
Polypropylene
4 = 440
F = 10.0
I = 15.0
N = 22.5
R = 27.5
W = 37.5
The last three
digits represent
significant figures.
The first digit
specifies number
of zeros to be
added.
See Ordering
Options Table
A1
A2
A3
K = ±10%
M = ±20%
V057 = Standard
(Grade IB and
AEC-Q200)
Built Into Tomorrow
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3097_R47_X1_440 • 11/3/2020
1
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X1, 440 VAC, 110ºC (Automotive Grade)
Ordering Options Table
Lead Spacing
Nominal
(mm)
Lead Length
(mm)
Lead and
Packaging Code
4 +2/−0
H0= 18.5 ±0.5
00
DQ
Tape & Reel (Large Reel)
H0= 18.5 ±0.5
CK
Bulk (Bag) – Short Leads
3.5 +0.5/−0
JB
Bulk (Bag) – Short Leads
4.0 +0.5/−0
JE
Bulk (Bag) – Short Leads
3.2 +0.3/−0
JH
Bulk (Bag) – Long Leads
18 ±1
JM
Bulk (Bag) – Long Leads
30 +5/−0
40
Bulk (Bag) – Long Leads
25 +2/−1
50
4 +2/−0
H0= 18.5 ±0.5
00
CK1
3.5 +0.5/−0
4.0 +0.5/−0
3.2 +0.3/−0
18 ±1
30 +5/−0
25 +2/−1
JB
JE
JH
JM
40
50
4 +2/−0
00
2.7 +0.5/−0
3.5 +0.5/−0
4.0 +0.5/−0
3.2 +0.3/−0
18 ±1
30 +5/−0
25 +2/−1
JA
JB
JE
JH
JM
40
50
Type of Leads and Packaging
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
Ammo Pack
Other Lead and Packaging Options
10,
15,
22.5
Standard Lead and Packaging Options
Bulk (Tray)–Short Leads
Tape & Reel (Large Reel)
Other Lead and Packaging Options
27.5
Bulk (Tray)–Short Leads
Bulk (Tray)–Short Leads
Bulk (Tray)–Short Leads
Bulk (Tray)–Long Leads
Bulk (Tray)–Long Leads
Bulk (Tray)–Long Leads
Standard Lead and Packaging Options
Bulk (Tray)–Short Leads
Other Lead and Packaging Options
37.5
1
Bulk (Tray)–Short Leads
Bulk (Tray)–Short Leads
Bulk (Tray)–Short Leads
Bulk (Tray)–Short Leads
Bulk (Tray)–Long Leads
Bulk (Tray)–Long Leads
Bulk (Tray)–Long Leads
Not for all sizes, see "Packaging Quantities" table
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3097_R47_X1_440 • 11/3/2020
2
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X1, 440 VAC, 110ºC (Automotive Grade)
Dimensions – Millimeters
Loose
Taped
L
T
H
H0
S
LL
F
P2
P2
S
T
H
P2
L
F
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
10.0
10.0
10.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
22.5
22.5
22.5
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
± 0.4
± 0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
4.0
5.0
6.0
5.0
6.0
6.0
7.5
7.5
8.5
9.0
10.0
11.0
13.0
6.0
6.5
7.0
8.5
10.0
11.0
13.0
9.0
11.0
13.0
14.0
18.0
22.0
11.0
13.0
16.0
19.0
20.0
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.7
+0.2/−0.7
+0.2/−0.7
+0.2/−0.7
+0.2/−0.7
+0.2/−0.7
+0.3/−0.7
+0.3/−0.7
+0.3/−0.7
+0.3/−0.7
+0.3/−0.7
9.0
11.0
12.0
11.0
12.0
17.5
13.5
18.5
14.5
12.5
16.0
19.0
12.0
15.0
13,5
16.0
17.0
18.5
20.0
22.0
17.0
20.0
22.0
28.0
33.0
37.0
22.0
24.0
28.5
32.0
40.0
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.7
+0.1/−0.7
+0.1/−0.7
+0.1/−0.7
+0.1/−0.7
+0.1/−0.7
+0.1/−0.7
+0.1/−0.7
+0.1/−0.7
+0.1/−0.7
+0.1/−0.7
13.0
13.0
13.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
26.5
26.5
26.5
26.5
26.5
26.5
26.5
32.0
32.0
32.0
32.0
32.0
32.0
41.5
41.5
41.5
41.5
41.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.3/−0.5
+0.3/−0.5
+0.3/−0.5
+0.5/−0.5
+0.5/−0.5
+0.5/−0.5
+0.5/−0.5
+0.5/−0.5
+0.5/−0.5
+0.5/−0.5
+0.3/−0.5
+0.3/−0.5
+0.3/−0.5
+0.3/−0.5
+0.3/−0.5
+0.3/−0.5
+0.3/−0.5
+0.3/−0.7
+0.3/−0.7
+0.3/−0.7
+0.3/−0.7
+0.3/−0.7
+0.3/−0.7
+0.3/−0.7
+0.3/−0.7
+0.3/−0.7
+0.3/−0.7
+0.3/−0.7
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1.0
1.0
1.0
1.0
1.0
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
Note: See Ordering Options Table for lead length (LL/H 0) options.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3097_R47_X1_440 • 11/3/2020
3
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X1, 440 VAC, 110ºC (Automotive Grade)
Performance Characteristics
Dielectric
Plates
Winding
Leads
Protection
Related documents
Rated Voltage (VR)
Recommended DC Voltage
Polypropylene film
Metal layer deposited by evaporation under vacuum
Non-inductive type
Tinned wire
Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94.
IEC 60384-14, EN 60384-14
440 VAC (50/60 Hz)
1,000 VDC
Capacitance Range
0.0047 – 2.2 µF
Capacitance Values
E6/E12 series (IEC 60063)
Capacitance Tolerance
Temperature Range
Climatic Category
±10%, ±20%
−40° to +110°C
40/110/56 IEC 60068-1
Storage time: ≤ 24 months from the date marked on the label package
Average relative humidity per year ≤ 70%
Storage Conditions
RH ≤ 85% for 30 days randomly distributed throughout the year
Dew is absent
Temperature: −40 to 80°C (see "Maximum Humidity in Storage Conditions" graph below)
Approvals
Dissipation Factor (tanδ)
at 1 kHz
Test Voltage Between Terminals
ENEC, UL, cUL
Maximum Values at +25°C ±5°C
Pitch = 10 mm
Pitch ≥ 15 mm
0.8%
0.3% (Typical: 0.2%)
The 100% screening factory test is carried out at 2,700 VDC/1,700 VAC. The voltage level is selected to meet
the requirements in applicable equipment standards. All electrical characteristics are checked after the test.
It is not permitted to repeat this test as there is a risk to damage the capacitor. KEMET is not liable in such
case for any failures.
Measured at +25°C ±5°C, according to IEC 60384–2
Insulation Resistance
Minimum Values Between Terminals
Voltage Charge
Voltage Charge Time
C ≤ 0.33 μF
C > 0.33 μF
100 VDC
1 minute
≥ 1 • 105 MΩ
≥ 30,000 MΩ • µF
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3097_R47_X1_440 • 11/3/2020
4
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X1, 440 VAC, 110ºC (Automotive Grade)
Performance Characteristics cont.
Maximum Humidity in Storage Condition
Maximum Overtemperature ∆Tlim vs Th
25
Relative Humidity (%)
20
∆Tlim (°C)
15
10
30 Days
Annual Average
5
120
110
100
Temperature Th(°C)
90
80
70
0
60
Temperature (°C)
80
50
60
40
40
30
20
20
0
10
−20
0
100
90
80
70
60
50
40
30
20
10
0
−40
Maximum Irms vs. Th
120%
Maximum Irms
100%
80%
60%
40%
20%
0%
25
35
45
55
65
75
85
95
105
115
Temperature Th(°C)
Qualification
Automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details
regarding test methods and conditions are referenced in document AEC–Q200, Stress Test Qualification for Passive
Components. For additional information regarding the Automotive Electronics Council and AEC–Q200, please visit their
website at www.aecouncil.com.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3097_R47_X1_440 • 11/3/2020
5
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X1, 440 VAC, 110ºC (Automotive Grade)
Impedance Graph
Environmental Test Data
Test
IEC Publication
Endurance
EN/IEC 60384–14
Vibration
IEC 60068–2–6 Test Fc
3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s2
Bump
IEC 60068–2–29 Test Eb
1,000 bumps at 390 m/s2
Change of Temperature
IEC 60068–2–14 Test Na
Upper and lower rated temperature 5 cycles
Active Flammability
IEC 60384–14
VR +20 surge pulses at 4 kV (pulse every 5 seconds)
Passive Flammability
IEC 60384–14
IEC 60384–1, IEC 60695–11–5 Needle flame test
Damp Heat Steady State
IEC 60068–2–78 Test Cab
Biased Humidity
MIL–STD–202 Method 103
THB Test
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Procedure
1.25 x VR VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1
second, 1,000 hours at upper rated temperature
+40°C and 93% RH, 56 days
1,000 hours 40°C/93%RH. Rated Voltage.
Measurement at 24 ±2 hours after test conclusion.
85°C, 85% RH and 440 VAC, 168 hours
Capacitance change (∆C/C): ≤ 10%
Dissipation factor change (Δtanδ): ≤ 150 * 10−4 (at 1 kHz for Cap > 1 µF)
Dissipation factor change (Δtanδ): ≤ 240 * 10−4 (at 10 kHz for Cap ≤ 1 µF)
IR ≥ 50% of initial limit or minimum 200 MΩ
F3097_R47_X1_440 • 11/3/2020
6
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X1, 440 VAC, 110ºC (Automotive Grade)
Approvals
Certification Body
Mark
Specification
File Number
IMQ S.p.A.
EN/IEC 60384-14
CA08.00101
UL
UL 60384-14 and
CAN/CSA E60384-14
(440 VAC)
E97797
Environmental Compliance
All KEMET EMI capacitors are RoHS Compliant.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3097_R47_X1_440 • 11/3/2020
7
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X1, 440 VAC, 110ºC (Automotive Grade)
Table 1 – Ratings & Part Number Reference
Dimensions in mm
Capacitance
Value (µF)
T
H
0.0047
0.0068
0.0082
0.010
0.010
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.047
0.047
0.056
0.068
0.068
0.068
0.082
0.10
0.047
0.047
0.068
0.10
0.12
0.15
0.18
0.22
0.27
0.33
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.2
1.5
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.2
4.0
5.0
6.0
6.0
5.0
5.0
5.0
5.0
6.0
6.0
6.0
7.5
7.5
6.0
9.0
8.5
10.0
7.5
13.0
10.0
11.0
6.0
6.5
6.0
7.0
8.5
10.0
10.0
11.0
13.0
13.0
9.0
9.0
9.0
9.0
11.0
11.0
13.0
13.0
14.0
18.0
18.0
18.0
22.0
11.0
11.0
13.0
16.0
16.0
19.0
19.0
20.0
20.0
9.0
11.0
12.0
12.0
11.0
11.0
11.0
11.0
12.0
12.0
12.0
13.5
13.5
17.5
12.5
14.5
16.0
18.5
12.0
16.0
19.0
15.0
13.5
15.0
16.0
17.0
18.5
18.5
20.0
22.0
22.0
17.0
17.0
17.0
17.0
20.0
20.0
22.0
22.0
28.0
33.0
33.0
33.0
37.0
22.0
22.0
24.0
28.5
28.5
32.0
32.0
40.0
40.0
Capacitance Value (µF)
T (mm)
H (mm)
L
Lead Spacing
(S)
dV/dt
(V/µs)
KEMET
Part Number
Customer
Part Number
13.0
13.0
13.0
13.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
10.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
750
750
750
750
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
300
300
300
300
300
300
300
300
300
300
225
225
225
225
225
225
225
225
225
225
225
225
225
150
150
150
150
150
150
150
150
150
474F1470(1)A1(2) V057
474F1680(1)A1(2) V057
474F1820(1)A1(2) V057
474F2100(1)A1(2) V057
474I2100(1)A1(2) V057
474I2120(1)A1(2) V057
474I2150(1)A1(2) V057
474I2180(1)A1(2) V057
474I2220(1)A1(2) V057
474I2270(1)A1(2) V057
474I2330(1)A1(2) V057
474I2390(1)A1(2) V057
474I2470(1)A1(2) V057
474I2470(1)A2(2) V057
474I2470(1)A3(2) V057
474I2560(1)A1(2) V057
474I2680(1)A1(2) V057
474I2680(1)A2(2) V057
474I2680(1)A3(2) V057
474I2820(1)A1(2) V057
474I3100(1)A1(2) V057
474N2470(1)A1(2) V057
474N2470(1)A2(2) V057
474N2680(1)A1(2) V057
474N3100(1)A1(2) V057
474N3120(1)A1(2) V057
474N3150(1)A1(2) V057
474N3180(1)A1(2) V057
474N3220(1)A1(2) V057
474N3270(1)A1(2) V057
474N3330(1)A1(2) V057
474R3150(1)A1(2) V057
474R3180(1)A1(2) V057
474R3220(1)A1(2) V057
474R3270(1)A2(2) V057
474R3330(1)A2(2) V057
474R3390(1)A1(2) V057
474R3470(1)A1(2) V057
474R3560(1)A1(2) V057
474R3680(1)A1(2) V057
474R3820(1)A1(2) V057
474R4100(1)A1(2) V057
474R4120(1)A1(2) V057
474R4150(1)A1(2) V057
474W3470(1)A1(2) V057
474W3560(1)A1(2) V057
474W3680(1)A1(2) V057
474W3820(1)A1(2) V057
474W4100(1)A1(2) V057
474W4120(1)A1(2) V057
474W4150(1)A1(2) V057
474W4180(1)A1(2) V057
474W4220(1)A1(2) V057
R474F1470(1)A1(2) V057
R474F1680(1)A1(2) V057
R474F1820(1)A1(2) V057
R474F2100(1)A1(2) V057
R474I2100(1)A1(2) V057
R474I2120(1)A1(2) V057
R474I2150(1)A1(2) V057
R474I2180(1)A1(2) V057
R474I2220(1)A1(2) V057
R474I2270(1)A1(2) V057
R474I2330(1)A1(2) V057
R474I2390(1)A1(2) V057
R474I2470(1)A1(2) V057
R474I2470(1)A2(2) V057
R474I2470(1)A3(2) V057
R474I2560(1)A1(2) V057
R474I2680(1)A1(2) V057
R474I2680(1)A2(2) V057
R474I2680(1)A3(2) V057
R474I2820(1)A1(2) V057
R474I3100(1)A1(2) V057
R474N2470(1)A1(2) V057
R474N2470(1)A2(2) V057
R474N2680(1)A1(2) V057
R474N3100(1)A1(2) V057
R474N3120(1)A1(2) V057
R474N3150(1)A1(2) V057
R474N3180(1)A1(2) V057
R474N3220(1)A1(2) V057
R474N3270(1)A1(2) V057
R474N3330(1)A1(2) V057
R474R3150(1)A1(2) V057
R474R3180(1)A1(2) V057
R474R3220(1)A1(2) V057
R474R3270(1)A2(2) V057
R474R3330(1)A2(2) V057
R474R3390(1)A1(2) V057
R474R3470(1)A1(2) V057
R474R3560(1)A1(2) V057
R474R3680(1)A1(2) V057
R474R3820(1)A1(2) V057
R474R4100(1)A1(2) V057
R474R4120(1)A1(2) V057
R474R4150(1)A1(2) V057
R474W3470(1)A1(2) V057
R474W3560(1)A1(2) V057
R474W3680(1)A1(2) V057
R474W3820(1)A1(2) V057
R474W4100(1)A1(2) V057
R474W4120(1)A1(2) V057
R474W4150(1)A1(2) V057
R474W4180(1)A1(2) V057
R474W4220(1)A1(2) V057
L (mm)
Lead
Spacing (S)
dV/dt (V/µs)
KEMET
Part Number
Customer
Part Number
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) M = ±20%, K = ±10%
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3097_R47_X1_440 • 11/3/2020
8
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X1, 440 VAC, 110ºC (Automotive Grade)
Soldering Process
The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder.
This has increased the liquidus temperature from that of 183°C for SnPb eutectic alloy to 217 – 221°C for the new alloys. As a
result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave
temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170°C). Wave
soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm),
and great care has to be taken during soldering. The recommended solder profiles from KEMET should be used. Please consult
KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline
for successful soldering. Please see Figure 1.
Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the
above the recommended limits may result to degradation or permanent damage to the capacitors.
Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert
through-hole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven,
if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended.
Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle.
Wave Soldering Recommendations
Manual Soldering Recommendations
The following is the recommendation for
manual soldering with a soldering iron.
300
Second Wave
First Wave
Recommended Soldering Temperature
Temperature (°C)
200
400
350
Soldering Iron Bit Temperature (°C)
2+3 seconds max
260°C
250
300
∆ T < 150°C
Cooling
Preheating
150
ca. 2°C/second
ca. 3.5°C/second typical
ca. 5°C/second
Tpreheat
100
Typical
250
50
200
150
0
100
0
40
80
120
160
200
240
Time (seconds)
50
0
0
1
2
3
4
5
6
7
8
Soldering Time (seconds)
The soldering iron tip temperature should
be set at 350°C (+10°C maximum) with the
soldering duration not to exceed more than 3
seconds.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3097_R47_X1_440 • 11/3/2020
9
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X1, 440 VAC, 110ºC (Automotive Grade)
Soldering Process cont.
Wave Soldering Recommendations cont.
1. The table indicates the maximum set-up temperature of the soldering process
Figure 1
Dielectric
Film Material
Maximum
Preheat
Temperature
Maximum
Peak Soldering
Temperature
Capacitor Capacitor Capacitor Capacitor
Pitch
Pitch
Pitch
Pitch
≤ 15 mm > 15 mm ≤ 15 mm > 15 mm
Polyester
130°C
130°C
270°C
270°C
Polypropylene
110°C
130°C
260°C
270°C
Paper
130°C
140°C
270°C
270°C
Polyphenylene
Sulphide
150°C
160°C
270°C
270°C
2. The maximum temperature measured inside the capacitor:
Set the temperature so that inside the element the maximum temperature is below the limit:
Dielectric Film Material
Maximum temperature
measured inside the element
Polyester
160°C
Polypropylene
110°C
Paper
160°C
Polyphenylene
sulphide
160°C
Temperature monitored inside the capacitor.
Selective Soldering Recommendations
Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole
components to be soldered is preheated and transported over the solder bath as in normal flow soldering without touching
the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten
solder only at the places of the selected components, and pressed against the lower surface of the board to solder the
components.
The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document,
however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of
overheating is greater than in double wave flow soldering, and great care must be taken so that the parts are not overheated.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3097_R47_X1_440 • 11/3/2020
10
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X1, 440 VAC, 110ºC (Automotive Grade)
Mounting
Resistance to Vibration and Mechanical Shock
AEC-Q200 Mechanical Stress Tests:
Mechanical Shock
Vibration
MIL-SDT-202 Method 213
Test condition C
Peak value 100 g, duration 6 ms, half-sine-wave (see MIL-HDBK for details)
MIL-SDT-202 Method 204
5 g for 20 minutes, 12 cycles each of 3 orientations
Use 8"X5" PCB, 0.031" thick. 7 secure points on one 8" side and 2 secure
points at corners of opposite sides. Parts mounted within 2" from any
secure point. Test from 10 – 2,000 Hz.
The capacitors are designed for PCB mounting. The stand-off pipes must be in good contact with the printed circuit board.
The capacitors with pitch ≤ 22.5 mm can be mechanically fixed by the leads, for pitch > 22.5 mm, the capacitor body has to
be properly fixed (e.g. clamped or glued).
Construction
2 Sections
Molded Plastic
Case
Detailed Cross Section
Molded Plastic Self-Extinguishing
Case
Resin
Single-sided Metallized
Polypropylene Film
(Second Layer)
Margin
Margin
Metal Contact
Layer
Metal Contact
Layer
FILM WINDING SCHEME OPTIONS
Margin
LeadsDouble-sided Metallized Polyester Film
etallized Polypropylene Film
Winding Scheme
sided
lized
pylene
m
sided
lized
pylene
Single-sided Metallized
Polypropylene Film
(First Layer)
Single-sided
Metallized
Polypropylene
Film
Double-sided
Metallized
Polypropylene Polyester Carrier
Film Dielectric
Film
Double-sided
Metallized
Polyester
Carrier
Film
2 Sections
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Double-sided
Single-sided
Metallized
Metallized
Polyester
Polypropylene
2 Sections
1 Section
F3097_R47_X1_440
• 11/3/2020
Double-sided
Metallized
Polypropylene Polyester Carrier
Film Dielectric
Film
11
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X1, 440 VAC, 110ºC (Automotive Grade)
Marking
Lead Spacing 10 mm
FRONT
TOP
Capacitance Tolerance
Approval
Marks
Series,
Dielectric
Code, Safety
Class, Self
Healing
Manufacturer’s
Logo
Rated Voltage,
T-Series
Capacitance
Date Code
IEC Climatic
Category
Passive
Flammability
Category
NOTE: Hot imprinting with or without
color or ink jet or laser marking
Manufacturing
Plant
Lead Spacing 15 mm, 22.5 mm (small case sizes)
FRONT
TOP
Capacitance Tolerance
Approval
Marks
Series,
Dielectric
Code, Safety
Class, Self
Healing
Manufacturer’s
Logo
Rated Voltage,
T-Series
Capacitance
Date Code
IEC Climatic
Category
Passive Flammability
Category:
B for volume ≥ 1750 mm3
C for volume < 1750 mm3
Manufacturing
Plant
NOTE: Hot imprinting with or without
color or ink jet or laser marking
* Differences caused by technology (clichee, laser or ink jet) and production line
Lead Spacing 22.5 and 27.5 mm (alternatives*) and 37.5 mm
FRONT
TOP
Dielectric
Code
Safety
Class
Self
Healing
Capacitance,
Capacitance
Tolerance,
Rated Voltage,
T-Series
QA Number
Series
Approval
Marks
Manufacturer’s
Logo
IEC Climatic
Category
Passive Flammability
Category
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Date Code
F3097_R47_X1_440 • 11/3/2020
Manufacturing
Plant
12
T-Series
Date Code
Manufacturing
Plant
IEC Climatic
Category
Metallized
Polypropylene Film EMI Suppression Capacitors
Passive Flammability
R47, Class X1, 440 VAC, 110ºC (Automotive
Grade)
Category:
B for volume ≥ 1750 mm3
C for volume < 1750 mm3
NOTE: Hot imprinting with or without
color or ink jet or laser marking
Marking cont.
Lead Spacing 22.5 and 27.5 mm (alternatives*) and 37.5 mm
FRONT
TOP
Dielectric
Code
Safety
Class
Self
Healing
Capacitance,
Capacitance
Tolerance,
Rated Voltage,
T-Series
QA Number
Series
Manufacturer’s
Logo
Approval
Marks
IEC Climatic
Category
Passive Flammability
Category
Date Code
Manufacturing
Plant
* Differences caused by technology (clichee, laser or ink jet) and production line
Manufacturing Date Code (IEC 60062)
Year
Code
Month
Code
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
T
U
V
W
X
A
January
February
March
April
May
June
July
August
September
October
November
December
1
2
3
4
5
6
7
8
9
O
N
D
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3097_R47_X1_440 • 11/3/2020
13
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X1, 440 VAC, 110ºC (Automotive Grade)
Packaging Quantities
Lead Spacing
(mm)
Thickness
(mm)
Height
(mm)
Length
(mm)
Bulk
Short Leads
Bulk
Long Leads
Standard
Reel
ø 355 mm
Large Reel
ø 500 mm
Ammo
Taped
10
4.0
5.0
6.0
9.0
11.0
12.0
13.0
13.0
13.0
2,000
1,300
1,000
1,800
1,500
1,200
750
600
500
1,500
1,250
1,000
1,000
800
680
15
5.0
6.0
6.0
7.5
7.5
8.5
9.0
10.0
11.0
13.0
11.0
12.0
17.5
13.5
18.5
14.5
12.5
16.0
19.0
12.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
2,000
1,750
1,000
1,000
900
1,000
1,000
750
450
750
1,000
900
700
700
500
500
520
500
350
490
600
500
500
350
300
270
300
200
1,250
1,000
1,000
800
800
700
650
600
500
480
800
680
680
500
500
440
410
380
340
280
22.5
6.0
6.5
7.0
8.5
10.0
11.0
13.0
15.0
13.5
16.0
17.0
18.5
20.0
22.0
26.5
26.5
26.5
26.5
26.5
26.5
26.5
805
800
700
468
396
360
300
500
–
500
300
300
250
200
–
–
–
–
–
–
–
700
–
550
450
350
350
300
464
–
380
280
235
217
–
27.5
9.0
11.0
13.0
14.0
18.0
22.0
22.0
17.0
20.0
22.0
28.0
33.0
37.0
37.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
816
560
480
352
256
168
168
408
336
288
176
128
112
112
–
–
–
–
–
–
–
450
350
300
–
–
–
–
–
–
–
–
–
–
–
37.5
11.0
13.0
16.0
19.0
20.0
22.0
24.0
28.5
32.0
40.0
41.5
41.5
41.5
41.5
41.5
420
360
216
192
126
252
216
108
96
84
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3097_R47_X1_440 • 11/3/2020
14
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X1, 440 VAC, 110ºC (Automotive Grade)
Lead Taping & Packaging (IEC 60286–2)
Figure 1
Lead Spacing 10 mm
Figure 2
Lead Spacing 15 mm
Figure 3
Lead Spacing 22.5 – 27.5 mm
P
W2
P2
ød
A
B
W
W0
W1
H0
P1 P0
F
P
h
h
D0
P1
P2
A-B
t
Taping Specification
Dimensions (mm)
Description
Symbol
10
Fig. 1
Lead Space
15
22.5
Fig. 2
Fig. 3
27.5
Fig. 3
Tol.
Lead wire diameter
d
0.6
0.6–0.8
0.8
0.8
±0.05
Taping lead space
P
25.4
25.4
38.1
38.1
±1
Feed hole lead space *
P0
12.7
12.7
12.7
12.7
±0.2 **
Centering of the lead wire
P1
7.7
5.2
7.8
5.3
±0.7
Centering of the body
P2
12.7
12.7
19.05
19.05
±1.3
Lead spacing (pitch) ***
F
10
15
22.5
27.5
+0.6/−0.1
Component alignment
∆h
0
0
0
0
±2
Height of component
from tape center
H 0 ****
18.5
18.5
18.5
18.5
±0.5
Carrier tape width
W
18
18
18
18
+1/−0.5
Hold down tape width
W0
9
10
10
10
Minimum
Hole position
W1
9
9
9
9
±0.5
Hold down tape position
W2
3
3
3
3
Maximum
Feed hole diameter
D0
4
4
4
4
±0.2
Total tape thickness
t
0.7
0.7
0.7
0.7
±0.2
* 15 mm also available
** Maximum of 1 mm on 20 lead spaces
*** Pitches 15 mm and 10 mm taped to 7.5 mm (crimped leads) available upon request
**** H0 = 16.5 mm is available upon request
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3097_R47_X1_440 • 11/3/2020
15
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X1, 440 VAC, 110ºC (Automotive Grade)
Lead Taping & Packaging (IEC 60286–2) cont.
Ammo Specifications
Dimensions (mm)
H
W
T
360
340
59
H
T
W
Reel Specifications
Reel Size
Standard
Large
Dimensions (mm)
D
H
W
355
500
30
25
55 Maximum
D
H
W
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3097_R47_X1_440 • 11/3/2020
16
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X1, 440 VAC, 110ºC (Automotive Grade)
KEMET Electronics Corporation Sales Offices
For a complete list of our global sales offi ces, please visit www.kemet.com/sales.
Disclaimer
All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes
no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury
or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3097_R47_X1_440 • 11/3/2020
17