Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X2, 520 VAC, 85°C
(Automotive Grade)
Overview
Applications
The R47 series is constructed of metallized polypropylene
film encapsulated with self-extinguishing resin in a box of
material that meets the requirements of UL 94 V–0.
For worldwide use in electromagnetic interference (EMI)
suppression in across-the-line applications that require X2
safety classification. Intended for use in situations in which
capacitor failure would not result in exposure to electric
shock.
Automotive Grade devices (up to 22.5 mm lead spacing)
meet the demanding Automotive Electronics Council's
AEC-Q200 qualification requirements.
Benefits
• Approvals: ENEC, UL, cUL
• X2 CLASS (IEC 60384–14)
• Rated voltage: 520VAC 50/60Hz
• Capacitance range: 0.0047 – 2.2 µF
• Lead spacing: 10.0 – 37.5 mm
• Capacitance tolerance: ±20%, ±10%
• Climatic category 40/85/56, IEC 60068–1
• Tape & Reel in accordance with IEC 60286–2
• RoHS compliant and lead-free terminations
• Operating temperature range of −40°C to +85°C
• 100% screening factory test at 2,700 VDC/1,700 VAC
• Self healing properties
• Automotive (AEC–Q200) grades available up to 22.5 mm lead spacing
Part Number System
R47
5
I
2100
00
01
M
Series
Rated Voltage
(VAC)
Lead Spacing
(mm)
Capacitance
Code (pF)
Lead and
Packaging Code
Internal Use
Capacitance
Tolerance
The last three
digits represent
significant figures.
The first digit
specifies number
of zeros to be
added.
See Ordering
Options Table
X2, Metallized
Polypropylene
5 = 520
F = 10.0
I = 15.0
N = 22.5
R = 27.5
W = 37.5
01
02
03
K = ±10%
M = ±20%
One world. One KEMET
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3008_R47_X2_520 • 8/10/2023
1
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X2, 520 VAC, 85°C (Automotive Grade)
Ordering Options Table
Lead Spacing
Nominal
(mm)
Lead Length
(mm)
Lead and
Packaging Code
4 +2/−0
H0= 18.5 ±0.5
00
DQ
Tape & Reel (Large Reel)
H0= 18.5 ±0.5
CK
Bulk (Bag)2 – Short Leads
3.5 +0.5/−0
JB
Bulk (Bag)2 – Short Leads
4.0 +0.5/−0
JE
Bulk (Bag) – Long Leads
30 +5/−0
40
Bulk (Bag) – Long Leads
25+2/−1
50
4 +2/−0
H0= 18.5 ±0.5
00
CK1
3.5 +0.5/−0
30 +5/−0
25 +2/−1
JB
40
50
Type of Leads and Packaging
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
Ammo Pack
10
15
22.5
Other Lead and Packaging Options
Standard Lead and Packaging Options
27.5
37.5
1
2
Bulk (Tray) – Short Leads
Tape & Reel (Large Reel)
Other Lead and Packaging Options
Bulk (Tray) – Short Leads
Bulk (Tray) – Long Leads
Bulk (Tray) – Long Leads
Not for all sizes, see "Packaging Quantities" table.
For lead spacing 22.5 case sizes ≥ 8.5*17*26.5 the parts are packed in a Pizza box 335*320*34 mm
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3008_R47_X2_520 • 8/10/2023
2
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X2, 520 VAC, 85°C (Automotive Grade)
Dimensions – Millimeters
FRONT VIEW
SIDE VIEW
L
T
H
S
LL
F
S
T
H
L
F
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
10.0
10.0
10.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
22.5
22.5
22.5
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
4.0
5.0
6.0
5.0
6.0
6.0
7.5
7.5
8.5
9.0
10.0
11.0
13.0
6.0
6.5
7.0
8.5
10.0
11.0
13.0
9.0
11.0
13.0
14.0
18.0
22.0
11.0
13.0
16.0
19.0
20.0
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.7
+0.2/−0.7
+0.2/−0.7
+0.2/−0.7
+0.2/−0.7
+0.2/−0.7
+0.3/−0.7
+0.3/−0.7
+0.3/−0.7
+0.3/−0.7
+0.3/−0.7
9.0
11.0
12.0
11.0
12.0
17.5
13.5
18.5
14.5
12.5
16.0
19.0
12.0
15.0
13.5
16.0
17.0
18.5
20.0
22.0
17.0
20.0
22.0
28.0
33.0
37.0
22.0
24.0
28.5
32.0
40.0
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.5
+0.1/−0.7
+0.1/−0.7
+0.1/−0.7
+0.1/−0.7
+0.1/−0.7
+0.1/−0.7
+0.1/−0.7
+0.1/−0.7
+0.1/−0.7
+0.1/−0.7
+0.1/−0.7
13.0
13.0
13.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
26.5
26.5
26.5
26.5
26.5
26.5
26.5
32.0
32.0
32.0
32.0
32.0
32.0
41.5
41.5
41.5
41.5
41.5
+0.2/−0.5
+0.2/−0.5
+0.2/−0.5
+0.3/−0.5
+0.3/−0.5
+0.3/−0.5
+0.5/−0.5
+0.5/−0.5
+0.5/−0.5
+0.5/−0.5
+0.5/−0.5
+0.5/−0.5
+0.5/−0.5
+0.3/−0.5
+0.3/−0.5
+0.3/−0.5
+0.3/−0.5
+0.3/−0.5
+0.3/−0.5
+0.3/−0.5
+0.3/−0.7
+0.3/−0.7
+0.3/−0.7
+0.3/−0.7
+0.3/−0.7
+0.3/−0.7
+0.3/−0.7
+0.3/−0.7
+0.3/−0.7
+0.3/−0.7
+0.3/−0.7
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1.0
1.0
1.0
1.0
1.0
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
Note: See Ordering Options Table for lead length (LL/H 0) options.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3008_R47_X2_520 • 8/10/2023
3
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X2, 520 VAC, 85°C (Automotive Grade)
Performance Characteristics
Dielectric
Plates
Winding
Leads
Protection
Related Documents
Rated Voltage VR
Recommended DC Voltage
Polypropylene film
Metal layer deposited by evaporation under vacuum
Non-inductive type
Tinned wire
Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94.
IEC 60384–14, EN 60384–14
520 VAC (50/60 Hz)
≤ 1,000 VDC
Capacitance Range
4,700 pF to 1 µF
Capacitance Values
E6 series (IEC 60063) measured at 1 kHz and +20 ±1°C
Capacitance Tolerance
Temperature Range
Climatic Category
±10%, ±20%
−40°C to +85°C
40/85/56 IEC 60068-1
Storage time: ≤ 24 months from the date marked on the label package
Average relative humidity per year ≤ 70%
Storage Conditions
RH ≤ 85% for 30 days randomly distributed throughout the year
Dew is absent
Temperature: −40 to 80°C (see "Maximum Humidity in Storage Conditions" graph below)
Approvals
Dissipation Factor (tanδ)
Test Voltage Between Terminals
ENEC, UL, cUL
≤ 0.1% (0.06%*) at 1 kHz , +25°C ±5°C (* typical value)
The 100% screening factory test is carried out at 2,700 VDC/1,700 VAC. The voltage level is selected to meet
the requirements in applicable equipment standards. All electrical characteristics are checked after the test.
This test cannot be repeated, as there is a risk of damaging the capacitor. KEMET is not liable in such cases
for any failures.
Measured at +25°C ±5°C, according to IEC 60384–2
Insulation Resistance
In DC Applications
Minimum Values Between Terminals
Voltage Charge
Voltage Charge Time
C ≤ 0.33 μF
C > 0.33 μF
100 VDC
1 minute
≥ 1 • 105 MΩ
≥ 30,000 MΩ • µF
Recommended voltage ≤ 1,000 VDC
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3008_R47_X2_520 • 8/10/2023
4
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X2, 520 VAC, 85°C (Automotive Grade)
Performance Characteristics cont.
Maximum Humidity in Storage Condition
100
Relative Humidity (%)
90
80
70
60
50
40
30 Days
Annual Average
30
20
10
0
−40
−20
0
20
Temperature (°C)
40
60
80
Qualification
Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details
regarding test methods and conditions are referenced in document AEC–Q200, Stress Test Qualification for Passive
Components. For additional information regarding the Automotive Electronics Council and AEC–Q200, please visit the
website at www.aecouncil.com.
Impedance Graph
Z[Ω]
100
10
1
0.1
0.01
0.001
4.7 μF p.37.5
0.1
1
0.1 μF p.15
0.33 μF p.22.5
1 μF p.27.5
F [MHz]
10
0.01 μF p.10
100
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3008_R47_X2_520 • 8/10/2023
5
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X2, 520 VAC, 85°C (Automotive Grade)
Environmental Test Data
Test
IEC Publication
Procedure
Endurance
EN/IEC 60384–14
Vibration
IEC 60068–2–6 Test Fc
3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s2
Bump
IEC 60068–2–29 Test Eb
1,000 bumps at 390 m/s2
Change of Temperature
IEC 60068–2–14 Test Na
Upper and lower rated temperature 5 cycles
Active Flammability
IEC 60384–14
VR + 20 surge pulses at 2.5 kV (pulse every 5 seconds)
Passive Flammability
IEC 60384–14
IEC 60384–1, IEC 60695–11–5 Needle flame test
Damp Heat Steady State
IEC 60068–2–78 Test Cab
1.25 x VR VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1
second, 1,000 hours at upper rated temperature
+40°C and 93% RH, 56 days
Approvals
Mark
Specification
File Number
EN/IEC 60384–14
CA08.00101
UL 60384–14 and
CAN/CSA E60384–14
(440VAC)
E97797
Environmental Compliance
All KEMET EMI capacitors are RoHS compliant.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3008_R47_X2_520 • 8/10/2023
6
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X2, 520 VAC, 85°C (Automotive Grade)
Table 1 – Ratings & Part Number Reference
Dimensions in mm
Capacitance
Value (µF)
T
H
0.0047
0.0068
0.0082
0.010
0.010
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.047
0.047
0.056
0.068
0.068
0.068
0.082
0.10
0.047
0.047
0.068
0.10
0.12
0.15
0.18
0.22
0.27
0.33
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.2
1.5
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.2
4.0
5.0
6.0
6.0
5.0
5.0
5.0
5.0
6.0
6.0
6.0
7.5
7.5
6.0
9.0
8.5
10.0
7.5
13.0
10.0
11.0
6.0
6.5
6.0
7.0
8.5
10.0
10.0
11.0
13.0
13.0
9.0
9.0
9.0
9.0
11.0
11.0
13.0
13.0
14.0
18.0
18.0
18.0
22.0
11.0
11.0
13.0
16.0
16.0
19.0
19.0
20.0
20.0
9.0
11.0
12.0
12.0
11.0
11.0
11.0
11.0
12.0
12.0
12.0
13.5
13.5
17.5
12.5
14.5
16.0
18.5
12.0
16.0
19.0
15.0
13.5
15.0
16.0
17.0
18.5
18.5
20.0
22.0
22.0
17.0
17.0
17.0
17.0
20.0
20.0
22.0
22.0
28.0
33.0
33.0
33.0
37.0
22.0
22.0
24.0
28.5
28.5
32.0
32.0
40.0
40.0
Capacitance
Value (µF)
T (mm)
H (mm)
L
Lead Spacing
(S)
dV/dt
(V/µs)
KEMET
Part Number
Legacy Part
Number
13.0
13.0
13.0
13.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
10.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
750
750
750
750
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
300
300
300
300
300
300
300
300
300
300
225
225
225
225
225
225
225
225
225
225
225
225
225
150
150
150
150
150
150
150
150
150
475F1470(1)01(2)
475F1680(1)01(2)
475F1820(1)01(2)
475F2100(1)01(2)
475I2100(1)01(2)
475I2120(1)01(2)
475I2150(1)01(2)
475I2180(1)01(2)
475I2220(1)01(2)
475I2270(1)01(2)
475I2330(1)01(2)
475I2390(1)01(2)
475I2470(1)01(2)
475I2470(1)02(2)
475I2470(1)03(2)
475I2560(1)01(2)
475I2680(1)01(2)
475I2680(1)02(2)
475I2680(1)03(2)
475I2820(1)01(2)
475I3100(1)01(2)
475N2470(1)01(2)
475N2470(1)02(2)
475N2680(1)01(2)
475N3100(1)01(2)
475N3120(1)01(2)
475N3150(1)01(2)
475N3180(1)01(2)
475N3220(1)01(2)
475N3270(1)01(2)
475N3330(1)01(2)
475R3150(1)01(2)
475R3180(1)01(2)
475R3220(1)01(2)
475R3270(1)02(2)
475R3330(1)02(2)
475R3390(1)01(2)
475R3470(1)01(2)
475R3560(1)01(2)
475R3680(1)01(2)
475R3820(1)01(2)
475R4100(1)01(2)
475R4120(1)01(2)
475R4150(1)01(2)
475W3470(1)01(2)
475W3560(1)01(2)
475W3680(1)01(2)
475W3820(1)01(2)
475W4100(1)01(2)
475W4120(1)01(2)
475W4150(1)01(2)
475W4180(1)01(2)
475W4220(1)01(2)
R475F1470(1)01(2)
R475F1680(1)01(2)
R475F1820(1)01(2)
R475F2100(1)01(2)
R475I2100(1)01(2)
R475I2120(1)01(2)
R475I2150(1)01(2)
R475I2180(1)01(2)
R475I2220(1)01(2)
R475I2270(1)01(2)
R475I2330(1)01(2)
R475I2390(1)01(2)
R475I2470(1)01(2)
R475I2470(1)02(2)
R475I2470(1)03(2)
R475I2560(1)01(2)
R475I2680(1)01(2)
R475I2680(1)02(2)
R475I2680(1)03(2)
R475I2820(1)01(2)
R475I3100(1)01(2)
R475N2470(1)01(2)
R475N2470(1)02(2)
R475N2680(1)01(2)
R475N3100(1)01(2)
R475N3120(1)01(2)
R475N3150(1)01(2)
R475N3180(1)01(2)
R475N3220(1)01(2)
R475N3270(1)01(2)
R475N3330(1)01(2)
R475R3150(1)01(2)
R475R3180(1)01(2)
R475R3220(1)01(2)
R475R3270(1)02(2)
R475R3330(1)02(2)
R475R3390(1)01(2)
R475R3470(1)01(2)
R475R3560(1)01(2)
R475R3680(1)01(2)
R475R3820(1)01(2)
R475R4100(1)01(2)
R475R4120(1)01(2)
R475R4150(1)01(2)
R475W3470(1)01(2)
R475W3560(1)01(2)
R475W3680(1)01(2)
R475W3820(1)01(2)
R475W4100(1)01(2)
R475W4120(1)01(2)
R475W4150(1)01(2)
R475W4180(1)01(2)
R475W4220(1)01(2)
L (mm)
Lead Spacing (S)
dV/dt (V/µs)
KEMET
Part Number
Legacy Part Number
(1) Insert lead and packaging code. See table for available options.
(2) M = ±20%, K = ±10%
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3008_R47_X2_520 • 8/10/2023
7
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X2, 520 VAC, 85°C (Automotive Grade)
Soldering Process
The implementation of the RoHS directive has resulted in the selection of SnAuCu (SAC) alloys or SnCu alloys as primary
solder material. This has increased the liquidus temperature from 183°C for SnPb eutectic alloys to 217 – 221°C for the new
alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher preheat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene
is 160 – 170°C). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead
spacing of 5 – 15 mm). Great care must be taken during soldering. The recommended solder profiles from KEMET should be
used. Consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves
as a solid guideline for successful soldering. See Figure 1.
Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess
of the above-recommended limits may result to degradation of or permanent damage to the capacitors.
Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components.
Insert through-hole parts after curing surface mount parts. Consult KEMET to discuss the actual temperature profile in
the oven, if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles
is recommended. Allow time for the capacitor surface temperature to return to normal temperature before performing the
second soldering cycle.
Wave Soldering Recommendations
Manual Soldering Recommendations
Following is the recommendation for manual
soldering with a soldering iron.
300
Second Wave
First Wave
Recommended Soldering Temperature
200
Temperature (°C)
400
350
Soldering Iron Bit Temperature (°C)
2+3 seconds max
260°C
250
300
250
∆ T < 150°C
Cooling
Preheating
150
ca. 2°C/second
ca. 3.5°C/second typical
ca. 5°C/second
Tpreheat
100
Typical
200
50
150
100
0
50
0
40
80
120
160
200
240
Time (seconds)
0
0
1
2
3
4
5
6
7
8
Soldering Time (seconds)
The soldering iron tip temperature should
be set at 350°C (+10°C maximum), with the
soldering duration not to exceed more than
3 seconds.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3008_R47_X2_520 • 8/10/2023
8
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X2, 520 VAC, 85°C (Automotive Grade)
Soldering Process cont.
Wave Soldering Recommendations cont.
1. The table indicates the maximum set-up temperature of the soldering process.
Dielectric
Film Material
Maximum
Preheat
Temperature
Maximum
Peak Soldering
Temperature
Capacitor Capacitor Capacitor Capacitor
Pitch
Pitch
Pitch
Pitch
≤ 15 mm > 15 mm ≤ 15 mm > 15 mm
Polyester
130°C
130°C
270°C
270°C
Polypropylene
110°C
130°C
260°C
270°C
Paper
130°C
140°C
270°C
270°C
Polyphenylene
Sulphide
150°C
160°C
270°C
270°C
2. The maximum temperature measured inside the capacitor: set the temperature so that the maximum temperature inside
the element is below the limit.
Dielectric Film Material
Maximum Temperature
Measured Inside the Element
Polyester
160°C
Polypropylene
110°C
Paper
160°C
Polyphenylene Sulphide
160°C
Temperature monitored inside the capacitor.
Selective Soldering Recommendations
Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole
components to be soldered is preheated and transported over the solder bath as it is in normal flow soldering, without
touching the solder. When the board is over the bath, it is stopped. Pre-designed solder pots are lifted from the bath with
molten solder, only at the places of the selected components, and pressed against the lower surface of the board to solder
the components.
The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document.
However, instead of two baths, there is only one with a time from 3 – 10 seconds. In selective soldering, the risk of
overheating is greater than in double wave flow soldering, and great care must be taken so that the parts do not overheat.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3008_R47_X2_520 • 8/10/2023
9
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X2, 520 VAC, 85°C (Automotive Grade)
Construction
2 Sections
Molded Plastic
Case
Single-sided Metallized
Polypropylene Film
(First Layer)
Detailed Cross Section
Molded Plastic Self-Extinguishing
Case
Resin
Single-sided Metallized
Polypropylene Film
(Second Layer)
Margin
Margin
Metal Contact
Layer
Metal Contact
Layer
FILM WINDINGMargin
SCHEME OPTIONS
Leads
etallized Polypropylene Film
Double-sided Metallized Polyester Film
Winding Scheme
sided
lized
pylene
m
Single-sided
Metallized
Polypropylene
Film
Single-sided
Metallized
Polypropylene
Film
Double-sided
Metallized
Polyester
Carrier
Film
4 Sections
© KEMET Electronics Corporation • One East Broward Boulevard
Metallized Polyphenylene
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Sulfide Film (SMR)
2 Sections
1 Section
2 Sections
sided
lized
pylene
m
Double-sided
Metallized
Polypropylene Polyester Carrier
Film Dielectric
Film
Double-sided
Metallized
Polyester
Carrier
Film
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
3 Sections
4 Sections
F3008_R47_X2_520 • 8/10/2023
Polypropylene Film/Foil
10
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X2, 520 VAC, 85°C (Automotive Grade)
Marking
Lead Spacing 10 mm
FRONT
TOP
Capacitance Tolerance
Series,
Dielectric
Code, Safety
Class, Self
Healing
Approval
Marks
Manufacturer’s
Logo
Capacitance,
Rated Voltage
IEC Climatic
Category
Date Code
Passive Flammability
Category:
C for volume < 1750 mm3
Manufacturing
Plant
NOTE: Hot imprinting with or without
color or ink jet or laser marking
Lead Spacing 15 mm, 22.5 mm, and 27.5 mm
FRONT
TOP
Capacitance Tolerance
Series,
Dielectric
Code, Safety
Class, Self
Healing
Approval
Marks
Manufacturer’s
Logo
Capacitance,
Rated Voltage
IEC Climatic
Category
Date Code
Passive Flammability
Category:
B for volume ≥ 1750 mm3
C for volume < 1750 mm3
Manufacturing
Plant
NOTE: Hot imprinting with or without
color or ink jet or laser marking
Slight change in the layout can be possible but this does not affect the content of the information of the current marking.
This change will be achieved without impact to product form, fit or function, as the products are equivalent with respect to physical, mechanical, quality
Lead Spacing 22.5 and 27.5 mm (alternatives*) and 37.5 mm
and reliability characteristics.
FRONT
TOP
Series Dielectric Safety
Code
Class
Approval
Marks
Manufacturer’s
Logo
IEC Climatic
Category
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Passive
Flammability
Category
Self
Healing
Capacitance,
Capacitance
Tolerance,
Rated Voltage
QA Number
Manufacturing Date Code
Plant F3008_R47_X2_520 • 8/10/2023
11
IEC Climatic
Category
Date Code
Manufacturing
Plant
Metallized Polypropylene Film EMI
Suppression
Capacitors
Passive
Flammability
Category:
R47, Class X2, 520 VAC, 85°C (Automotive
B for volumeGrade)
≥ 1750 mm3
C for volume < 1750 mm3
NOTE: Hot imprinting with or without
color or ink jet or laser marking
Marking cont.
Lead Spacing 22.5 and 27.5 mm (alternatives*) and 37.5 mm
FRONT
TOP
Series Dielectric Safety
Code
Class
Self
Healing
Capacitance,
Capacitance
Tolerance,
Rated Voltage
Manufacturer’s
Logo
Approval
Marks
IEC Climatic
Category
QA Number
Passive
Flammability
Category
Manufacturing
Plant
Date Code
*Differences are caused by technology
(clichee, laser, or ink) and production line.
Slight change in the layout can be possible but this does not affect the content of the information of the current marking.
This change will be achieved without impact to product form, fit or function, as the products are equivalent with respect to physical, mechanical, quality
and reliability characteristics.
Manufacturing Date Code (IEC 60062)
Year
Code
Year
Code
Year
Code
Month
Code
Month
Code
2020
2021
2022
2023
2024
2025
2026
M
N
P
R
S
T
U
2027
2028
2029
2030
2031
2032
2033
V
W
X
A
B
C
D
2034
2035
2036
2037
2038
2039
2040
E
F
G
H
K
L
M
January
February
March
April
May
June
1
2
3
4
5
6
July
August
September
October
November
December
7
8
9
O
N
D
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3008_R47_X2_520 • 8/10/2023
12
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X2, 520 VAC, 85°C (Automotive Grade)
Packaging Quantities
Lead
Spacing
(mm)
Thickness
(mm)
Height
(mm)
Length
(mm)
Lead and Packaging Code:
Bulk
Short
Leads
Bulk
Long Leads
Standard
Reel
ø 355 mm
Large
Reel
ø 500 mm
Ammo
Taped
00 - JA - JB
JE - JH
JM
40 – 50
GY
CK
DQ
10
4
5
6
9
11
12
13
13
13
2,000
1,300
1,000
2,200
2,000
1,800
1,800
1,500
1,200
750
600
500
1,500
1,250
1,000
1,000
800
680
15
5
6
6
7.5
7.5
8.5
9
10
11
13
11
12
17.5
13.5
18.5
14.5
12.5
16
19
12
18
18
18
18
18
18
18
18
18
18
2,000
1,750
1,000
1,000
900
1,000
1,000
750
450
750
1,250
1,000
800
650
650
700
550
400
350
520
1,000
900
700
700
500
500
520
500
350
490
600
500
500
350
300
270
270
200
1,250
1,000
1,000
800
800
700
650
600
500
480
800
680
680
500
500
440
410
380
340
280
22.5
6
6.5
7
8.5
10
11
13
15
13,5
16
17
18.5
20
22
26.5
26.5
26.5
26.5
26.5
26.5
26.5
805
800
700
468
396
360
300
450
450
350
350
200
150
500
500
300
300
250
200
-
700
550
450
350
350
300
464
380
280
235
217
-
27.5
9
11
13
14
18
22
17
20
22
28
33
37
32
32
32
32
32
32
816
560
480
352
256
168
408
336
288
176
128
112
408
336
288
176
128
112
-
450
350
300
-
-
37.5
11
13
16
19
20
22
24
28.5
32
40
41.5
41.5
41.5
41.5
41.5
420
360
216
192
126
252
216
108
96
84
252
216
108
96
84
-
-
-
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3008_R47_X2_520 • 8/10/2023
13
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X2, 520 VAC, 85°C (Automotive Grade)
Lead Taping & Packaging (IEC 60286–2)
Figure 1
Lead Spacing 10 mm
Figure 2
Lead Spacing 15 mm
Figure 3
Lead Spacing 22.5 – 27.5 mm
P
W2
P2
ød
A
B
W
W0
W1
H0
P1 P0
F
P
h
h
D0
P1
P2
A-B
t
Taping Specification
Dimensions (mm)
Description
Symbol
10
Fig. 1
Lead Space
15
22.5
Fig. 2
Fig. 3
27.5
Fig. 3
Tol.
Lead wire diameter
d
0.6
0.6–0.8
0.8
0.8
±0.05
Taping lead space
P
25.4
25.4
38.1
38.1
±1
Feed hole lead space *
P0
12.7
12.7
12.7
12.7
±0.2 **
Centering of the lead wire
P1
7.7
5.2
7.8
5.3
±0.7
Centering of the body
P2
12.7
12.7
19.05
19.05
±1.3
Lead spacing (pitch) ***
F
10
15
22.5
27.5
+0.6/−0.1
Component alignment
∆h
0
0
0
0
±2
Height of component
from tape center
H 0 ****
18.5
18.5
18.5
18.5
±0.5
Carrier tape width
W
18
18
18
18
+1/−0.5
Hold down tape width
W0
9
10
10
10
Minimum
Hole position
W1
9
9
9
9
±0.5
Hold down tape position
W2
3
3
3
3
Maximum
Feed hole diameter
D0
4
4
4
4
±0.2
Total tape thickness
t
0.7
0.7
0.7
0.7
±0.2
* 15 mm also available
** Maximum of 1 mm on 20 lead spaces
*** Pitches 15 mm and 10 mm taped to 7.5 mm (crimped leads) available upon request
**** H0 = 16.5 mm is available upon request
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3008_R47_X2_520 • 8/10/2023
14
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X2, 520 VAC, 85°C (Automotive Grade)
Lead Taping & Packaging (IEC 60286–2) cont.
Ammo Specifications
Dimensions (mm)
H
W
T
360
340
59
H
T
W
Reel Specifications
Reel Size
Standard
Large
Dimensions (mm)
D
H
W
355
500
30
25
55 Maximum
D
H
W
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3008_R47_X2_520 • 8/10/2023
15
Metallized Polypropylene Film EMI Suppression Capacitors
R47, Class X2, 520 VAC, 85°C (Automotive Grade)
KEMET Electronics Corporation Sales Offices
For a complete list of our global sales offi ces, please visit www.kemet.com/sales.
Disclaimer
YAGEO Corporation and its affi liates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space fl ight.
All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes
no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury
or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other
measures may not be required.
Additional information about production site flexibility can be found
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3008_R47_X2_520 • 8/10/2023
16
