R523W468050P0K

Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Overview Applications The R52 series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material that meets the requirements of UL 94 V–0. The R52 Series is ideal for harsh environmental conditions and meets the demanding Automotive Electronics Council's AEC–Q200 qualification requirements. For worldwide use in electromagnetic interference (EMI) suppression in across-the-line applications that require X2 safety classification. Intended for use in situations in which capacitor failure would not result in exposure to electric shock. Typical applications include connection in series with the mains, capacitive power supplies and energy meters, with special emphasis in automotive applications for severe ambient conditions. Benefits • Approvals: ENEC, UL, cUL, CQC • X2 CLASS (IEC 60384-14) • THB Grade IIB: 85°C, 85% RH, 500 hours at URAC acc. to IEC 60384-14 • Rated voltage: 310 VAC 50/60 Hz • Capacitance range: 0.047 – 22 µF • Lead spacing: 10.0 – 37.5 mm • Capacitance tolerance: ±20%, ±10% • Climatic category 40/110/56, IEC 60068-1 • Tape & Reel in accordance with IEC 60286-2 • RoHS compliant and lead-free terminations • Operating temperature range of −40°C to +110°C • 100% screening factory test at 1,900 VDC • Self healing properties • Automotive (AEC-Q200) grade Simulator Tool and Lifetime Expectancy model available online: K-SIM K-LEM Part Number System R52 3 I 3470 00 P0 M Series Rated Voltage (VAC) Lead Spacing (mm) Capacitance Code (pF) Packaging Internal Use Capacitance Tolerance See Ordering Options Table P0 P1 P2 P3 X2, Metallized Polypropylene 3 = 310 F = 10.0 I = 15.0 N = 22.5 R = 27.5 W = 37.5 The last three digits represent significant figures. The first digit specifies number of zeros to be added. K = ±10% M = ±20% Built Into Tomorrow © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3123_R52_X2_310_110C_MIN • 8/15/2023 1 Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Ordering Options Table Lead Spacing Nominal (mm) 10 15 22.5 Type of Leads and Packaging Lead Length (mm) Lead and Packaging Code Standard Lead and Packaging Options Bulk (Bag) – Short Leads Pizza Pack – Short Leads Ammo Pack Other Lead and Packaging Options 4 +2/-0 4 +2/-0 H0 = 18.5 ±0.5 00 BB DQ1 Tape & Reel (Large Reel) H0 = 18.5 ±0.5 CK Tape & Reel (Standard Reel) H0 = 18.5 ±0.5 GY1 Bulk (Bag)2 – Short Leads 2.7 +0.5/−0 JA Bulk (Bag) – Short Leads 3.5 +0.5/−0 JB Bulk (Bag) – Short Leads 4.0 +0.5/−0 JE Bulk (Bag) – Short Leads 3.2 +0.3/−0.2 JH Bulk (Bag) – Long Leads 18 ±1 JM Bulk (Bag) – Long Leads 30 +5/−0 40 Bulk (Bag) – Long Leads 25 +2/−1 50 4 +2/−0 4 +2/-0 H0= 18.5 ±0.5 00 BB CK1 Bulk (Tray) – Short Leads 2.7 +0.5/−0 JA Bulk (Tray) – Short Leads 3.5 +0.5/−0 JB Bulk (Tray) – Short Leads 4.0 +0.5/−0 JE Bulk (Tray) – Short Leads 3.2 +0.3/−0.2 JH Bulk (Tray) – Long Leads 18 ±1 JM Bulk (Tray) – Long Leads 30 +5/−0 40 Bulk (Tray) – Long Leads 25 +2/−1 50 4 +2/−0 4 +2/-0 00 BB Bulk (Tray) – Short Leads 2.7 +0.5/−0 JA Bulk (Tray) – Short Leads 3.5 +0.5/−0 JB Bulk (Tray) – Short Leads 4.0 +0.5/−0 JE Bulk (Tray) – Short Leads 3.2 +0.3/−0.2 JH Bulk (Tray) – Long Leads 18 ±1 JM Bulk (Tray) – Long Leads 30 +5/−0 40 Bulk (Tray) – Long Leads 25 +2/−1 50 2 2 2 Standard Lead and Packaging Options Bulk (Tray) – Short Leads Pizza Pack – Short Leads Tape & Reel (Large Reel) Other Lead and Packaging Options 27.5 Standard Lead and Packaging Options Bulk (Tray) – Short Leads Pizza Pack – Short Leads Other Lead and Packaging Options 37.5 1 2 Not for all sizes, see "Packaging Quantities" table. For lead spacing 22.5 case sizes ≥ 8.5*17*26.5 the parts are packed in a Pizza box 335*320*34 mm © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3123_R52_X2_310_110C_MIN • 8/15/2023 2 Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Dimensions – Millimeters FRONT VIEW SIDE VIEW L T H S LL F S T H L F Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 4.0 5.0 6.0 5.0 6.0 7.5 7.5 8.5 9.0 10.0 11.0 7.0 8.5 10.0 11.0 13.0 9.0 11.0 13.0 14.0 16.0 18.0 22.0 11.0 13.0 16.0 19.0 20.0 24.0 30.0 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.7 +0.2/−0.7 +0.2/−0.7 +0.2/−0.7 +0.2/−0.7 +0.2/−0.7 +0.2/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 9.0 11.0 12.0 11.0 12.0 13.5 18.5 14.5 12.5 16.0 19.0 16.0 17.0 18.5 20.0 22.0 17.0 20.0 22.0 28.0 30.0 33.0 37.0 22.0 24.0 28.5 32.0 40.0 44.0 45.0 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 32.0 32.0 32.0 32.0 32.0 32.0 32.0 41.5 41.5 41.5 41.5 41.5 41.5 41.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.5/−0.5 +0.5/−0.5 +0.5/−0.5 +0.5/−0.5 +0.5/−0.5 +0.5/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 Note: See Ordering Options Table for lead length (LL/H0) options. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3123_R52_X2_310_110C_MIN • 8/15/2023 3 Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Performance Characteristics Dielectric Plates Winding Leads Protection Related Documents Rated Voltage VR Recommended DC Voltage Polypropylene film Metal layer deposited by evaporation under vacuum Non-inductive type Tinned wire Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94. IEC 60384-14, EN 60384-14 310 VAC (50/60 Hz) ≤ 630 VDC Capacitance Range 0.047 – 22 µF Capacitance Values E6 series (IEC 60063) measured at 1 kHz and +20 ±1°C Capacitance Tolerance Temperature Range Climatic Category ±10%, ±20% −40°C to +110°C 40/110/56 IEC 60068-1 Storage time: ≤ 24 months from the date marked on the label package Average relative humidity per year ≤ 70% Storage Conditions RH ≤ 85% for 30 days randomly distributed throughout the year Dew is absent Temperature: −40 to 80°C (see "Maximum Humidity in Storage Conditions" graph below) Approvals ENEC, UL, cUL, CQC Dissipation Factor (tanδ) at 1 kHz at 25 °C ±5°C Test Voltage Between Terminals C ≤ 0.1 µF C > 0.1 µF 0.3% 0.2% The 100% screening factory test is carried out at 1,900 VDC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. This test cannot be repeated, as there is a risk of damaging the capacitor. KEMET is not liable in such cases for any failures. Measured at +25°C ±5°C, according to IEC 60384–2 Insulation Resistance Minimum Values Between Terminals Voltage Charge 100 VDC * Typical value © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Voltage Charge Time C ≤ 0.33 μF C > 0.33 μF 1 minute ≥ 1 • 105 MΩ ( ≥ 5 • 105 MΩ )* ≥ 30,000 MΩ • µF ( ≥ 150,000 MΩ • µF )* F3123_R52_X2_310_110C_MIN • 8/15/2023 4 Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Performance Characteristics cont. Maximum Humidity in Storage Condition 100 25 80 20 70 60 ∆Tlim (°C) Relative Humidity (%) 90 Maximum Overtemperature ∆Tlim vs Th 50 40 30 Days Annual Average 30 20 10 5 10 0 15 0 −40 −20 0 20 Temperature (°C) 40 60 80 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 Temperature Th(°C) Maximum Irms vs. Th 120% Maximum Irms 100% 80% 60% 40% 20% 0% 40 45 50 55 60 65 70 75 80 85 Temperature Th(°C) 90 95 100 105 110 115 Th is the maximum ambient temperature surrounding the capacitor or hottest contact point (e.g. tracks), whichever is higher, in the worst operation conditions in °C. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3123_R52_X2_310_110C_MIN • 8/15/2023 5 Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Qualification Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AEC–Q200, Stress Test Qualification for Passive Components. For additional information regarding the Automotive Electronics Council and AEC–Q200, please visit the website at www.aecouncil.com. Impedance Graph 100 Z (Ohm) 10 1 47nF, p. 10 470nF, p. 15 1.0 µF, p. 22.5 4.7µF, p. 27.5 0.1 0.01 15µF, p. 37.5 0.1 1 10 100 Frequency (MHz) © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3123_R52_X2_310_110C_MIN • 8/15/2023 6 Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Maximum Voltage (Vrms) Versus Frequency (Sinusoidal Waveform/Th ≤ 80°C) Lead Spacing 15 mm Lead Spacing 10 mm 1,000 1,000 100 100 Voltage (Vrms) Voltage (Vrms) 0.047 µF 0.056 µF 0.068 µF 0.1 µF 10 1 0.1 1.0 Frequency (kHz) 10.0 1 100.0 100 100 0.47 0.68 1 2.2 Voltage (Vrms) 1,000 10 µF µF µF µF 1.0 Frequency (kHz) 1.0 10.0 100.0 1 1.5 3.3 4.7 6.8 10 1 1 0.1 0.1 µF µF µF µF µF Frequency (kHz) 10.0 100.0 Lead Spacing 27.5 mm Lead Spacing 22.5 mm 1,000 Voltage (Vrms) 0.15 0.33 0.47 0.68 0.82 10 0.1 µF µF µF µF µF 1.0 Frequency (kHz) 10.0 100.0 Lead Spacing 37.5 mm 1,000 Voltage (Vrms) 100 2.2 3.3 4.7 6.8 10 15 22 10 1 0.1 µF µF µF µF µF µF µF 1.0 Frequency (kHz) 10.0 100.0 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3123_R52_X2_310_110C_MIN • 8/15/2023 7 Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Maximum Current (Irms) Versus Frequency (Sinusoidal Waveform/Th ≤ 80°C) Lead Spacing 15 mm Lead Spacing 10 mm 10 10 1 Current (Arms) Current (Arms) 1 0.15 0.33 0.47 0.68 0.82 0.1 0.1 0.047 µF 0.056 µF 0.068 µF 0.1 µF µF µF µF µF µF 0.01 0.01 0.1 1.0 Frequency (kHz) 10.0 0.1 100.0 1.0 1 1 1 1.5 3.3 4.7 6.8 Current (Arms) 10 10 Current (Arms) 100.0 Lead Spacing 27.5 mm Lead Spacing 22.5 mm 0.47 µF 0.68 µF 1 µF 2.2 µF 0.1 10.0 Frequency (kHz) µF µF µF µF µF 0.1 0.01 0.01 0.1 1.0 Frequency (kHz) 10.0 100.0 0.1 1.0 Frequency (kHz) 10.0 100.0 Lead Spacing 37.5 mm 100 Current (Arms) 10 2.2 3.3 4.7 6.8 10 15 22 1 0.1 µF µF µF µF µF µF µF 0.01 0.1 1.0 Frequency (kHz) 10.0 100.0 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3123_R52_X2_310_110C_MIN • 8/15/2023 8 Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Environmental Test Data Test IEC Publication Procedure Endurance IEC 60384-14 Vibration MIL-STD-202 Method 204 Mechanical Shock MIL-STD-202 Method 213 Temperature Cycling JESD22-Method JA-104 Active Flammability IEC 60384-14 VR + 20 surge pulses at 2.5 kV (pulse every 5 seconds) Passive Flammability IEC 60384-14 IEC 60384–1, IEC 60695–11–5 Needle flame test 1.25 x VR VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1 second, 1,000 hours at upper rated temperature 5 G for 20 minutes, 12 cycles each of 3 orientations. Use 8" X 5" PCB, 0.031" thick. 7 secure points on one 8" side and 2 secure points at corners of opposite sides. Parts mounted within 2" from any secure point. Test from 10 – 2,000 Hz. Figure 1 of Method 213. Condition C 1,000 cycles (−40°C to 110°C) Note: Measurement at 24 ±4 hours after test conclusion. 30 minute maximum dwell time at each temperature extreme. 1 minute maximum transition time. 85°C/85% RH and 240 VAC, 1,000 hours Capacitance change (∆C/C): ≤ 10% Dissipation factor change (∆tan δ): ≤ 15 * 10−3 (at 1 kHz) Insulation resistance Rins or time constant τ = CR Rins: ≥ 50% of initial limit Biased Humidity According to Grade IIB 85°C/85% RH and 310 VAC, 500 hours Capacitance change (∆C/C): ≤ 10% Dissipation factor change (∆tan δ): ≤ 24 * 10−3 (at 10 kHz) for C ≤ 1 µF Dissipation factor change (∆tan δ): ≤ 15 * 10−3 (at 1 kHz) for C > 1 µF Insulation resistance Rins or time constant τ = CR Rins: ≥ 50% of initial limit Approvals Certification Body Mark Specification File Number IMQ S-p.A. EN/IEC 60384–14 CA08.00231 UL UL 60384–14 and CAN/CSA E60384–14 (310 VAC) E97797 IEC 60384–14 CQC20001263098 CQC20001263100 CQC20001263101 CQC20001263102 CQC20001263103 CQC © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3123_R52_X2_310_110C_MIN • 8/15/2023 9 Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Environmental Compliance All KEMET EMI capacitors are RoHS Compliant. Table 1 – Ratings & Part Number Reference Dimensions in mm Capacitance Value (µF) T H 0.047 0.056 0.068 0.10 0.10 0.15 0.22 0.33 0.33 0.47 0.47 0.47 0.56 0.68 0.68 0.82 1.0 0.47 0.56 0.68 0.82 1.0 1.0 1.5 1.5 2.2 1.0 1.5 2.2 3.3 4.7 4.7 4.7 6.8 2.2 3.3 4.7 6.8 10.0 15.0 22.0 4.0 5.0 5.0 6.0 5.0 5.0 6.0 7.5 9.0 8.5 9.0 7.5 10.0 10.0 11.0 11.0 12.0 7.0 7.0 7.0 8.5 8.5 10.0 10.0 11.0 13.0 9.0 11.0 13.0 14.0 14.0 16.0 18.0 22.0 11.0 13.0 16.0 19.0 20.0 24.0 30.0 9.0 11.0 11.0 12.0 11.0 11.0 12.0 13.5 12.5 14.5 12.5 18.5 16.0 16.0 19.0 19.0 20.0 16.0 16.0 16.0 17.0 17.0 18.5 18.5 20.0 22.0 17.0 20.0 22.0 28.0 28.0 30.0 33.0 37.0 22.0 24.0 28.5 32.0 40.0 44.0 45.0 Capacitance Value (µF) B (mm) H (mm) L Lead Spacing (S) dV/dt (V/µs) KEMET Part Number Legacy Part Number 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 41.5 41.5 41.5 41.5 41.5 41.5 41.5 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 500 500 500 500 400 400 400 400 400 400 400 400 400 400 400 400 400 200 200 200 200 200 200 200 200 200 150 150 150 150 150 150 150 150 100 100 100 100 100 100 100 523F2470(1)P0(2) 523F2560(1)P0(2) 523F2680(1)P0(2) 523F3100(1)P0(2) 523I3100(1)P0(2) 523I3150(1)P0(2) 523I3220(1)P0(2) 523I3330(1)P0(2) 523I3330(1)P1(2) 523I3470(1)P0(2) 523I3470(1)P1(3) 523I3470(1)P3(2) 523I3560(1)P0(2) 523I3680(1)P1(3) 523I3680(1)P0(2) 523I3820(1)P0(3) 523I4100(1)P0(3) 523N3470(1)P0(2) 523N3560(1)P0(2) 523N3680(1)P0(2) 523N3820(1)P0(2) 523N4100(1)P1(3) 523N4100(1)P0(2) 523N4150(1)P1(3) 523N4150(1)P0(2) 523N4220(1)P0(3) 523R4100(1)P0(2) 523R4150(1)P0(2) 523R4220(1)P0(2) 523R4330(1)P0(2) 523R4470(1)P1(3) 523R4470(1)P2(2) 523R4470(1)P0(2) 523R4680(1)P0(2) 523W4220(1)P0(2) 523W4330(1)P0(2) 523W4470(1)P0(2) 523W4680(1)P0(2) 523W5100(1)P0(2) 523W5150(1)P0(2) 523W5220(1)P0(2) R523F2470(1)P0(2) R523F2560(1)P0(2) R523F2680(1)P0(2) R523F3100(1)P0(2) R523I3100(1)P0(2) R523I3150(1)P0(2) R523I3220(1)P0(2) R523I3330(1)P0(2) R523I3330(1)P1(2) R523I3470(1)P0(2) R523I3470(1)P1(3) R523I3470(1)P3(2) R523I3560(1)P0(2) R523I3680(1)P1(3) R523I3680(1)P0(2) R523I3820(1)P0(3) R523I4100(1)P0(3) R523N3470(1)P0(2) R523N3560(1)P0(2) R523N3680(1)P0(2) R523N3820(1)P0(2) R523N4100(1)P1(3) R523N4100(1)P0(2) R523N4150(1)P1(3) R523N4150(1)P0(2) R523N4220(1)P0(3) R523R4100(1)P0(2) R523R4150(1)P0(2) R523R4220(1)P0(2) R523R4330(1)P0(2) R523R4470(1)P1(3) R523R4470(1)P2(2) R523R4470(1)P0(2) R523R4680(1)P0(2) R523W4220(1)P0(2) R523W4330(1)P0(2) R523W4470(1)P0(2) R523W4680(1)P0(2) R523W5100(1)P0(2) R523W5150(1)P0(2) R523W5220(1)P0(2) L (mm) Lead Spacing (p) dV/dt (V/µs) KEMET Part Number Legacy Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (2) M = ±20%, K = ±10% (3) M = ±20% (only available tolerance). © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3123_R52_X2_310_110C_MIN • 8/15/2023 10 Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAuCu (SAC) alloys or SnCu alloys as primary solder material. This has increased the liquidus temperature from 183°C for SnPb eutectic alloys to 217 – 221°C for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher preheat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170°C). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 – 15 mm). Great care must be taken during soldering. The recommended solder profiles from KEMET should be used. Consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. See Figure 1. Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the above-recommended limits may result to degradation of or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through-hole parts after curing surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Allow time for the capacitor surface temperature to return to normal temperature before performing the second soldering cycle. Wave Soldering Recommendations Manual Soldering Recommendations Following is the recommendation for manual soldering with a soldering iron. 300 Second Wave First Wave Recommended Soldering Temperature 200 Temperature (°C) 400 350 Soldering Iron Bit Temperature (°C) 2+3 seconds max 260°C 250 300 250 ∆ T < 150°C Cooling Preheating 150 ca. 2°C/second ca. 3.5°C/second typical ca. 5°C/second Tpreheat 100 Typical 200 50 150 100 0 50 0 40 80 120 160 200 240 Time (seconds) 0 0 1 2 3 4 5 6 7 8 Soldering Time (seconds) The soldering iron tip temperature should be set at 350°C (+10°C maximum), with the soldering duration not to exceed more than 3 seconds. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3123_R52_X2_310_110C_MIN • 8/15/2023 11 Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Soldering Process cont. Wave Soldering Recommendations cont. 1. The table indicates the maximum set-up temperature of the soldering process. Dielectric Film Material Maximum Preheat Temperature Maximum Peak Soldering Temperature Capacitor Capacitor Capacitor Capacitor Pitch Pitch Pitch Pitch ≤ 15 mm > 15 mm ≤ 15 mm > 15 mm Polyester 130°C 130°C 270°C 270°C Polypropylene 110°C 130°C 260°C 270°C Paper 130°C 140°C 270°C 270°C Polyphenylene Sulphide 150°C 160°C 270°C 270°C 2. The maximum temperature measured inside the capacitor: set the temperature so that the maximum temperature inside the element is below the limit. Dielectric Film Material Maximum Temperature Measured Inside the Element Polyester 160°C Polypropylene 110°C Paper 160°C Polyphenylene Sulphide 160°C Temperature monitored inside the capacitor. Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as it is in normal flow soldering, without touching the solder. When the board is over the bath, it is stopped. Pre-designed solder pots are lifted from the bath with molten solder, only at the places of the selected components, and pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document. However, instead of two baths, there is only one with a time from 3 – 10 seconds. In selective soldering, the risk of overheating is greater than in double wave flow soldering, and great care must be taken so that the parts do not overheat. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3123_R52_X2_310_110C_MIN • 8/15/2023 12 Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Mounting Resistance to Vibration and Mechanical Shock AEC-Q200 Rev. E, Mechanical Stress Tests: Figure 1 of Method 213 Mechanical Shock MIL-SDT-202 Method 213 Vibration MIL-SDT-202 Method 204 • THT: Condition C • SMD: Condition C • Tested per the Supplier’s recommended mounting method • 5 g for 20 minutes, 12 cycles each of 3 orientations • Tested per the Supplier’s recommended mounting method • Verification of transfer load: during setup, verify that with the selected PCB design (size, thickness and secure points), or an alternative mount, that the transferred load onto the component corresponds to the requested load. This verification can be achieved using a laser vibrometer or other adequate measuring device • Test from 10 Hz – 2,000 Hz. The capacitors are designed for PCB mounting. The stand-off pipes must be in good contact with the printed circuit board. The capacitor body has to be properly fixed (e.g. clamped or glued). Construction Molded Plastic Case Single-sided Metallized Polypropylene Film (First Layer) Detailed Cross Section Molded Plastic Self-Extinguishing Case Resin Single-sided Metallized Polypropylene Film (Second Layer) Margin Metal Contact Layer Metal Contact Layer Margin FILM WINDING SCHEME OPTIONS Leads Single-sided Metallized Polypropylene Film Double-sided Metallized Polyester Film Winding Scheme Single-sided Metallized Polypropylene Film 1 Section Single-sided Metallized Polypropylene Film 2 Sections 2 Sect 1 Section © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Single-sided Metallized Polypropylene Double-sided Metallized Polypropylene Polyester Carrier Film Dielectric Film Double-sided Metallized Polyester Carrier Film Single-sided Metallized Polypropylene F3123_R52_X2_310_110C_MIN • 8/15/2023 Double-sided Metallized Polyester Polypropylene Film Dielectric 13 Double-sided Metallized Polyester Carrier Film Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Marking Lead Spacing 15 mm, 22.5 mm, and 27.5 mm FRONT Approval Marks TOP Series, Safety Class, Self Healing Manufacturer’s Logo Capacitance Tolerance Capacitance, Rated Voltage Date Code IEC Climatic Category Flammability Category B for volume ≥ 1750 mm3 C for voulme < 1750 mm3 Manufacturing Plant NOTE: Hot imprinting with or without color or ink jet or laser marking Lead Spacing 22.5, 27.5 mm (alternatives*) and 37.5 mm FRONT TOP Series Safety Class Manufacturer’s Logo Approval Marks Self Healing Capacitance, Capacitance Tolerance, Rated Voltage IEC Climatic Category Flammability Category Date Code Manufacturing Plant *Differences are caused by technology (clichee, laser, or ink) and production line. Slight change in the layout can be possible but this does not affect the content of the information of the current marking. This change will be achieved without impact to product form, fit or function, as the products are equivalent with respect to physical, mechanical, quality and reliability characteristics. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3123_R52_X2_310_110C_MIN • 8/15/2023 14 Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Marking cont. Lead Spacing 10 mm FRONT TOP Approval Marks Capacitance Tolerance Series, Safety Class, Self Healing Manufacturer’s Logo Capacitance, Rated Voltage Date Code IEC Climatic Category Passive Flammability Category C for volume < 1750 mm3 Manufacturing Plant NOTE: Hot imprinting with or without color or ink jet or laser marking Slight change in the layout can be possible but this does not affect the content of the information of the current marking. This change will be achieved without impact to product form, fit or function, as the products are equivalent with respect to physical, mechanical, quality and reliability characteristics. Manufacturing Date Code (IEC 60062) Year Code Year Code Year Code Month Code Month Code 2020 2021 2022 2023 2024 2025 2026 M N P R S T U 2027 2028 2029 2030 2031 2032 2033 V W X A B C D 2034 2035 2036 2037 2038 2039 2040 E F G H K L M January February March April May June 1 2 3 4 5 6 July August September October November December 7 8 9 O N D © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3123_R52_X2_310_110C_MIN • 8/15/2023 15 Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Packaging Quantities Lead Spacing (mm) Thickness (mm) Height (mm) Length (mm) Lead and Packaging Code: Bulk Short Leads Bulk Long Leads Standard Reel ø 355 mm Large Reel ø 500 mm Ammo Taped Pizza 00 - JA - JB JE - JH JM 40 – 50 GY CK DQ BB 10 4 5 6 9 11 12 13 13 13 2,000 1,300 1,000 2,200 2,000 1,800 1,800 1,500 1,200 750 600 500 1,500 1,250 1000 1000 800 680 - 15 5 6 7.5 7.5 8.5 9 10 11 12 11 12 13.5 18.5 14.5 12.5 16 19 20 18 18 18 18 18 18 18 18 18 2,000 1,750 1,000 900 1,000 1,000 750 450 400 1,250 1,000 800 650 650 700 550 400 350 1,000 900 700 500 500 520 500 350 350 600 500 350 300 270 270 220 1,250 1,000 800 800 700 650 600 500 450 800 680 500 500 440 410 380 340 300 1,122 935 748 748 663 612 561 510 459 22.5 7 8.5 10 11 13 16 17 18.5 20 22 26.5 26.5 26.5 26.5 26.5 700 468 396 360 300 450 350 350 200 150 500 300 300 250 200 - 550 450 350 350 300 380 280 235 217 - 564 468 396 360 300 27.5 9 11 13 14 16 18 22 17 20 22 28 30 33 37 32 32 32 32 32 32 32 816 560 480 352 288 256 168 408 336 288 176 144 128 112 408 336 288 176 144 128 112 - 450 350 300 - - 370 300 250 230 200 170 150 37.5 11 13 16 19 20 24 30 22 24 28.5 32 40 44 45 41.5 41.5 41.5 41.5 41.5 41.5 41.5 420 360 216 192 126 108 90 252 216 108 96 84 72 60 252 216 108 96 84 72 60 - - - 210 175 140 119 112 91 77 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3123_R52_X2_310_110C_MIN • 8/15/2023 16 Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) Figure 1 Lead Spacing 10 mm Figure 2 Lead Spacing 15 mm Figure 3 Lead Spacing 22.5 – 27.5 mm P W2 P2 ød A B W W0 W1 H0 P1 P0 F P h h D0 P1 P2 A-B t Taping Specification Dimensions (mm) Description Symbol 10 Fig. 1 Lead Space 15 22.5 Fig. 2 Fig. 3 27.5 Fig. 3 Tol. Lead wire diameter d 0.6 0.6–0.8 0.8 0.8 ±0.05 Taping lead space P 25.4 25.4 38.1 38.1 ±1 Feed hole lead space * P0 12.7 12.7 12.7 12.7 ±0.2 ** Centering of the lead wire P1 7.7 5.2 7.8 5.3 ±0.7 Centering of the body P2 12.7 12.7 19.05 19.05 ±1.3 Lead spacing (pitch) *** F 10 15 22.5 27.5 +0.6/−0.1 Component alignment ∆h 0 0 0 0 ±2 Height of component from tape center H 0 **** 18.5 18.5 18.5 18.5 ±0.5 Carrier tape width W 18 18 18 18 +1/−0.5 Hold down tape width W0 9 10 10 10 Minimum Hole position W1 9 9 9 9 ±0.5 Hold down tape position W2 3 3 3 3 Maximum Feed hole diameter D0 4 4 4 4 ±0.2 Total tape thickness t 0.7 0.7 0.7 0.7 ±0.2 * 15 mm also available ** Maximum of 1 mm on 20 lead spaces *** Pitches 15 mm and 10 mm taped to 7.5 mm (crimped leads) available upon request **** H0 = 16.5 mm is available upon request © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3123_R52_X2_310_110C_MIN • 8/15/2023 17 Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) cont. Ammo Specifications Dimensions (mm) H W T 360 340 59 H T W Reel Specifications Reel Size Standard Large Dimensions (mm) D H W 355 500 30 25 55 Maximum D H W © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3123_R52_X2_310_110C_MIN • 8/15/2023 18 Metallized Polypropylene Film EMI Suppression Capacitors for Harsh Environmental Conditions R52 (Miniature), Class X2, 310 VAC, 110°C (Automotive Grade) KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer YAGEO Corporation and its affi liates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space fl ight. All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. Additional information about production site flexibility can be found KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3123_R52_X2_310_110C_MIN • 8/15/2023 19