R71XI410050H0K

Polypropylene Pulse/High Frequency Capacitors R71, 125°C Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Overview Applications The R71H is constructed of metallized polypropylene film with radial leads of tinned wire. The radial leads are electrically welded to the metal layer on the ends of the capacitor winding. The capacitor is encapsulated in a self-extinguishing solvent resistant plastic case with thermosetting resin material meeting UL 94 V–0 requirements. Typical applications include power factor correction and pulse applications. Not suitable for across-the-line application (see Suppressor Capacitors). Automotive grade devices meet the demanding Automotive Electronics Council's AEC–Q200 qualification requirements. Benefits • Voltage range: 450 – 630 VDC • Capacitance range: 0.033 – 22 µF • Lead Spacing: 10 – 27.5 mm • Capacitance tolerance: ±10%, ±20%, ±5% (on request) • Climatic category: 55/110/56 IEC 60068–1 • Operating temperature range of −55°C to +125°C • RoHS compliance and lead-free terminations • Tape & Reel packaging in accordance with IEC 60286–2 • Self-healing Part Number System R71 X I 4100 AA H0 K Series Rated Voltage (VDC) Lead Spacing (mm) Capacitance Code (pF) Packaging Internal Use Capacitance Tolerance Metallized Polypropylene X = 450 V = 520 P = 630 F = 10 I = 15 N = 22.5 R = 27.5 The last three digits represent significant figures. The first digit specifies the total number of zeros to be added. See Ordering Options Table H0 H1 H2 H3 H4 H5 H6 H7 J = ±5% K = ±10% M = ±20% Built Into Tomorrow © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3130_R71H • 4/30/2021 1 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R71, 125°C Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Ordering Options Table Lead Spacing Nominal (mm) Lead Length (mm) Lead and Packaging Code 4 +2/−0 H0 = 18.5±0.5 AA DQ Tape & Reel (Standard Reel Ø 355 mm) H0 = 18.5±0.5 GY Tape & Reel (Large Reel Ø 500 mm) H0 = 18.5±0.5 CK Bulk (Bag) – Short Leads 3.5 +0.5/−0 JB Bulk (Bag)2 – Short Leads 4.0 +0.5/−0 JE Bulk (Bag)2 – Short Leads 3.2 +0.3/−0.2 JH Bulk (Bag) – Long Leads 18±1 JM Bulk (Bag) – Long Leads 30 +5/−0 40 Bulk (Bag) – Long Leads 25 +2/−1 50 4 +2/−0 AA H0 = 18.5±0.5 H0 = 18.5±0.5 3.5 +0.5/−0 4.0 +0.5/−0 3.2 +0.3/−0.2 18±1 30 +5/−0 25 +2/−1 GY CK1 JB JE JH JM 40 50 Type of Leads and Packaging Standard Lead and Packaging Options Bulk (Bag)2 – Short Leads Ammo Pack Other Lead and Packaging Options 10 15 22.5 2 Standard Lead and Packaging Options Bulk (Tray) – Short Leads Other Lead and Packaging Options 27.5 1 2 Tape & Reel (Standard Reel Ø 355 mm) Tape & Reel (Large Reel Ø 500 mm) Bulk (Tray) – Short Leads Bulk (Tray) – Short Leads Bulk (Tray) – Short Leads Bulk (Tray) – Long Leads Bulk (Tray) – Long Leads Bulk (Tray) – Long Leads = Not for all sizes, see "Packaging Quantities" table. = For lead spacing 22.5 case sizes ≥ 8.5*17*26.5 the parts are packed in a Pizza box 335*320*34 mm © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3130_R71H • 4/30/2021 2 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R71, 125°C Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Dimensions – Millimeters Loose Taped L T H H0 S LL F P2 P2 S T H P2 L F Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 ±0.4 ±0.4 ±0.4 ± 0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 4.0 5.0 6.0 5.0 6.0 6.0 7.5 7.5 8.5 9.0 10.0 11.0 13.0 6.0 7.0 8.5 10.0 11.0 13.0 9.0 11.0 13.0 13.0 14.0 16.0 18.0 22.0 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.2/-0.7 +0.2/-0.7 +0.2/-0.7 +0.2/-0.7 +0.2/-0.7 +0.2/-0.7 +0.2/-0.7 +0.2/-0.7 9.0 11.0 12.0 11.0 12.0 17.5 13.5 18.5 14.5 12.5 16.0 19.0 12.0 15.0 16.0 17.0 18.5 20.0 22.0 17.0 20.0 22.0 25.0 28.0 30.0 33.0 37.0 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.5 +0.1/-0.7 +0.1/-0.7 +0.1/-0.7 +0.1/-0.7 +0.1/-0.7 +0.1/-0.7 +0.1/-0.7 +0.1/-0.7 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 26.5 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 +0.2/-0.5 +0.2/-0.5 +0.2/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.5/-0.5 +0.5/-0.5 +0.5/-0.5 +0.5/-0.5 +0.5/-0.5 +0.5/-0.5 +0.5/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.5 +0.3/-0.7 +0.3/-0.7 +0.3/-0.7 +0.3/-0.7 +0.3/-0.7 +0.3/-0.7 +0.3/-0.7 +0.3/-0.7 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ± 0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 Note: See Ordering Options Table for lead length (LL/H0) options. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3130_R71H • 4/30/2021 3 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R71, 125°C Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Performance Characteristics Dielectric Plates Winding Leads Protection Polypropylene film Metal layer deposited by evaporation under vacum Non-inductive type Tinned wire Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94. Rated Voltage VR 450 VDC 160 VAC 520 VDC 200 VAC 630 VDC 220 VAC Capacitance Range (µF) 0.1 – 22 0.1 – 15 0.033 – 10 Capacitance Values Capacitance Tolerance Operating Temperature Range Rated Temperature TR Voltage Derating Climatic Category E12 series (IEC 60063) measured at 1 kHz and +20 ±1°C ±10%, ±20%, ±5% on request −55°C to +125°C +85°C The following decreasing factor has to be applied on the rated voltage: +85°C to 125°C: 1.25% per °C for VR (DC and AC) = operating voltage Vop 55/110/56 IEC 60068–1 Storage time: ≤ 24 months from the date marked on the package label Average relative humidity per year ≤ 70% Storage Conditions RH ≤ 85% for 30 days randomly distributed throughout the year Dew is absent Temperature: −40 to 80°C (see "Maximum Humidity in Storage Conditions" graph below) Test Voltage Capacitance Drift Maximum Pulse Steepness Temperature Coefficient Self-Inductance (Lead Length ~ 2 mm) 1.5 x VR VDC for 2 seconds (between terminations) at +25°C ±5°C Maximum 0.5% after a 2 year storage period at a temperature of +10°C to +40°C and a relative humidity of 40% to 60% dV/dt according to Table 1. For working voltages lower than rated voltage (V < VR), the specified dV/dt can be multiplied by the factor VR /V. −(200±100) ppm/°C at 1 kHz Lead Spacing (mm) 10 15 22.5 27.5 L (nH) ≈ 9 10 16 18 Maximum 1 nH per 1 mm lead and capacitor length. Dissipation Factor tanδ for C ≤ 2.2 µF: ≤ 0.1% (0.04%)* at 25°C ±5°C for C > 2.2 µF: ≤ 0.15% (0.06%)* at 25°C ±5°C Measured at +25°C, 100 VDC 60 seconds Minimum Values Between Terminals Insulation Resistance C ≤ 0.33 μF C > 0.33 µF ≥ 100,000 MΩ (≥ 500,000 MΩ)* ≥ 30,000 MΩ • µF (≥ 150,000 MΩ • µF)* * Typical value © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3130_R71H • 4/30/2021 4 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R71, 125°C Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Performance Characteristics cont. Maximum Humidity in Storage Condition 100 25 80 20 70 60 ∆Tlim (°C) 50 40 30 Days Annual Average 30 20 10 5 10 0 15 0 −40 −20 0 20 Temperature (°C) 40 60 80 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 Relative Humidity (%) 90 Maximum Overtemperature ∆Tlim vs Th Temperature Th(°C) Th is the maximum ambient temperature surrounding the capacitor or hottest contact point (e.g. tracks), whichever is higher, in the worst operation conditions in °C. Qualification Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AEC–Q200, Stress Test Qualification for Passive Components. For additional information regarding the Automotive Electronics Council and AEC–Q200, please visit their website at www.aecouncil.com. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3130_R71H • 4/30/2021 5 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R71, 125°C Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Maximum Voltage (Vrms) Versus Frequency (Sinusoidal Waveform/Th ≤ 100°C) 520 VDC/200 VAC 450 VDC/160 VAC 100 100 Voltage (Vrms) 1,000 Voltage (Vrms) 1,000 10 1 0.15 µF p=10 0.33 µF p=15 1 µF p=15 3.3 µF p=22.5 6.8 µF p=27.5 22 µF p=27.5 0 1 10 Frequency (kHz) 100 1,000 100 1,000 0.15 µF p=10 0.33 µF p=15 1 µF p=15 3.3 µF p=22.5 6.8 µF p=27.5 15 µF p=27.5 10 1 0 1 10 Frequency (kHz) 100 1,000 630 VDC/220 VAC 1,000 Voltage (Vrms) 100 10 1 0.047 µF p=10 0.22 µF p=15 0.47 µF p=15 1.5 µF p=22.5 3.3 µF p=27.5 10 µF p=27.5 0 1 10 Frequency (kHz) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3130_R71H • 4/30/2021 6 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R71, 125°C Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Maximum Current (Irms) Versus Frequency (Sinusoidal Waveform/Th ≤ 100°C) 450 VDC/160 VAC 520 VDC/200 VAC 10 10 Current (Arms) 100 Current (Arms) 100 1 0.15 µF p=10 0.33 µF p=15 1 µF p=15 3.3 µF p=22.5 6.8 µF p=27.5 22 µF p=27.5 0.1 0.01 1 0.1 0.01 0 1 10 Frequency (kHz) 100 0.15 µF p=10 0.33 µF p=15 1 µF p=15 3.3 µF p=22.5 6.8 µF p=27.5 15 µF p=27.5 1,000 0 1 10 Frequency (kHz) 100 1,000 630 VDC/220 VAC 100 Current (Arms) 10 1 0.047 µF p=10 0.22 µF p=15 0.47 µF p=15 1.5 µF p=22.5 3.3 µF p=27.5 10 µF p=27.5 0.1 0.01 0 1 10 Frequency (kHz) 100 1,000 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3130_R71H • 4/30/2021 7 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R71, 125°C Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Environmental Test Data Damp Heat, Steady State Test Test Conditions: Temperature: Relative humidity (RH): Test duration: Endurance Test +40°C ±2°C 93% ±2% 56 days Performances |Δ C/C| ≤ 5%, IR after test ≥ 50% of initial limit Test Conditions Performances Temperature: Voltage applied: Test duration: +105°C ±2°C 1.0 x VOP (DC) 1,000 hours |Δ C/C| ≤ 5%, IR after test ≥ 50% of initial limit Temperature: Voltage applied: Test duration: +125°C ±2°C 1.0 x VOP (DC) 1,000 hours |Δ C/C| ≤ 5%, IR after test ≥ 50% of initial limit Temperature: Relative humidity (RH): Voltage applied: Test duration: +40°C ±2°C 93% ±2% 1.0 x VR (DC) 1,000 hours |Δ C/C| ≤ 10%, Δ tanδ ≤ 0.001 at 1 kHz IR after test ≥ 50% of initial limit Resistance to Soldering Heat Test Test Conditions Solder bath temperature: Dipping time (with heat screen): 260°C ±5°C 10 seconds ±1 second Performances |Δ C/C| ≤ 2%, Environmental Compliance All KEMET pulse capacitors are RoHS compliant. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3130_R71H • 4/30/2021 8 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R71, 125°C Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Table 1 – Ratings & Part Number Reference VDC VAC Cap Value (µF) 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 520 520 520 520 520 520 520 520 520 520 520 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 200 200 200 200 200 200 200 200 200 200 200 0.10 0.15 0.22 0.33 0.47 0.33 0.47 0.68 1.0 1.5 2.2 1.0 1.5 2.2 3.3 4.7 2.2 3.3 4.7 6.8 10 15 22 0.10 0.15 0.22 0.22 0.33 0.47 0.68 1.0 1.5 1.0 1.5 VAC Cap Value VDC Dimensions in mm Irms max (*) Rth Ød (mm) dV/dt (V/µs) Max K0 (V2/µs) Ipkr Lead Length 2x4 mm at 100 kHz at 100 kHz, 85°C Apk nH mΩ Arms (°C/W) 15.0 22.5 33.0 49.5 70.5 33.0 47.0 68.0 100.0 150.0 220.0 70.0 105.0 154.0 231.0 329.0 110.0 165.0 235.0 340.0 500.0 750.0 1,100.0 20.0 30.0 44.0 30.8 46.2 65.8 95.2 140.0 210.0 85.0 127.5 9 9 9 9 9 10 10 10 10 10 10 16 16 16 16 16 18 18 18 18 18 18 18 9 9 9 10 10 10 10 10 10 16 16 199 133 90 60 42 84 59 53 36 27 18 51 34 23 15 11 29 19 14 9 10 7 7 199 133 90 127 84 59 53 36 27 51 34 1.1 1.39 1.79 2.28 2.72 1.98 2.46 2.61 3.32 4.14 5.24 3.01 3.79 4.74 6.02 7.67 4.45 5.45 6.86 8.57 8.68 11.33 11.78 1.13 1.48 1.86 1.62 2.06 2.46 2.74 3.56 4.33 3.09 3.92 79 79 69 64 64 60 56 56 51 44 40 43 41 38 36 31 35 35 31 29 26 23 21 79 69 64 60 56 56 51 44 40 41 38 Apk Lead Length at 100 kHz at 100 kHz, 85°C (°C/W) Ipkr ESL ESR Irms max (*) R th T H L 9.0 9.0 11.0 12.0 12.0 11.0 12.0 12.0 13.5 16.0 19.0 15.0 16.0 17.0 18.5 22.0 17.0 17.0 20.0 22.0 28.0 33.0 37.0 9.0 11.0 12.0 11.0 12.0 12.0 13.5 16.0 19.0 16.0 17.0 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 32.0 32.0 32.0 32.0 32.0 32.0 32.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 150 150 150 150 150 100 100 100 100 100 100 70 70 70 70 70 50 50 50 50 50 50 50 200 200 200 140 140 140 140 140 140 85 85 135,000 135,000 135,000 135,000 135,000 90,000 90,000 90,000 90,000 90,000 90,000 63,000 63,000 63,000 63,000 63,000 45,000 45,000 45,000 45,000 45,000 45,000 45,000 208,000 208,000 208,000 145,600 145,600 145,600 145,600 145,600 145,600 88,400 88,400 L Lead Spacing (S) Ød (mm) dV/dt (V/µs) Max K0 (V2/µs) H ESR max Lead Spacing (S) 4.0 4.0 5.0 6.0 6.0 5.0 6.0 6.0 7.5 10.0 11.0 6.0 7.0 8.5 10.0 13.0 9.0 9.0 11.0 13.0 14.0 18.0 22.0 4.0 5.0 6.0 5.0 6.0 6.0 7.5 10.0 11.0 7.0 8.5 T ESL KEMET Part Number Customer Part Number 71XF3100(1)H0(2) R71XF3100(1)H0(2) 71XF3150(1)H0(2) R71XF3150(1)H0(2) 71XF3220(1)H0(2) R71XF3220(1)H0(2) 71XF3330(1)H0(2) R71XF3330(1)H0(2) 71XF3470(1)H0(3) R71XF3470(1)H0(3) 71XI3300(1)H0(2) R71XI3300(1)H0(2) 71XI3470(1)H0(2) R71XI3470(1)H0(2) 71XI3680(1)H0(2) R71XI3680(1)H0(2) 71XI4100(1)H0(2) R71XI4100(1)H0(2) 71XI4150(1)H0(2) R71XI4150(1)H0(2) 71XI4220(1)H0(2) R71XI4220(1)H0(2) 71XN4100(1)H0(2) R71XN4100(1)H0(2) 71XN4150(1)H0(2) R71XN4150(1)H0(2) 71XN4220(1)H0(2) R71XN4220(1)H0(2) 71XN4330(1)H0(2) R71XN4330(1)H0(2) 71XN4470(1)H0(2) R71XN4470(1)H0(2) 71XR4220(1)H0(2) R71XR4220(1)H0(2) 71XR4330(1)H0(2) R71XR4330(1)H0(2) 71XR4470(1)H0(2) R71XR4470(1)H0(2) 71XR4680(1)H0(2) R71XR4680(1)H0(2) 71XR5100(1)H0(2) R71XR5100(1)H0(2) 71XR5150(1)H0(2) R71XR5150(1)H0(2) 71XR5220(1)H0(2) R71XR5220(1)H0(2) 71VF3100(1)H6(2) R71VF3100(1)H6(2) 71VF3150(1)H6(2) R71VF3150(1)H6(2) 71VF3220(1)H6(2) R71VF3220(1)H6(2) 71VI3220(1)H6(2) R71VI3220(1)H6(2) 71VI3330(1)H6(2) R71VI3330(1)H6(2) 71VI3470(1)H6(2) R71VI3470(1)H6(2) 71VI3680(1)H6(2) R71VI3680(1)H6(2) 71VI4100(1)H6(2) R71VI4100(1)H6(2) 71VI4150(1)H6(2) R71VI4150(1)H6(2) 71VN4100(1)H6(2) R71VN4100(1)H6(2) 71VN4150(1)H6(2) R71VN4150(1)H6(2) KEMET Part Number Customer Part Number (1) Insert lead and packaging code. See table for available options. (2) J=5%, K = 10%, M = 20% (3) M = ±20% (only available tolerance) (4) K = 10%, M = ±20% (only available tolerance) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3130_R71H • 4/30/2021 9 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R71, 125°C Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Table 1 – Ratings & Part Number Reference cont. VDC VAC Cap Value (µF) 520 520 520 520 520 520 520 520 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 200 200 200 200 200 200 200 200 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 2.2 3.3 2.2 3.3 4.7 6.8 10 15 0.033 0.047 0.068 0.10 0.15 0.22 0.15 0.22 0.33 0.47 0.68 1.0 1.5 0.68 1.0 1.5 2.2 3.3 1.5 2.2 3.3 4.7 6.8 10 VAC Cap Value VDC Dimensions in mm Irms max (*) Rth Ød (mm) dV/dt (V/µs) Max K0 (V2/µs) Ipkr Lead Length 2x4 mm at 100 kHz at 100 kHz, 85°C Apk nH mΩ Arms (°C/W) 187.0 280.5 154.0 231.0 329.0 476.0 700.0 1,050.0 8.6 12.2 17.7 26.0 39.0 57.2 25.5 37.4 56.1 79.9 115.6 170.0 255.0 74.8 110.0 165.0 242.0 363.0 120.0 176.0 264.0 376.0 544.0 800.0 16 16 18 18 18 18 18 18 9 9 9 9 9 9 10 10 10 10 10 10 10 16 16 16 16 16 18 18 18 18 18 18 23 15 29 19 14 9 10 7 603 423 293 199 133 90 186 127 84 59 53 36 27 75 51 34 23 15 42 29 19 14 9 10 4.91 6.43 4.45 5.75 7.13 9.05 9.25 11.91 0.65 0.78 0.93 1.21 1.54 1.86 1.34 1.62 2.06 2.58 2.82 3.73 4.33 2.48 3.20 4.06 5.04 6.43 3.67 4.69 5.97 7.30 9.33 9.73 36 31 35 31 29 26 23 21 79 79 79 69 64 64 60 60 56 51 48 40 40 43 38 36 34 31 35 31 29 28 25 21 Apk Lead Length at 100 kHz at 100 kHz, 85°C (°C/W) Ipkr ESL ESR Irms max (*) R th T H L 18.5 22.0 17.0 20.0 22.0 28.0 33.0 37.0 9.0 9.0 9.0 11.0 12.0 12.0 11.0 11.0 12.0 13.5 14.5 19.0 19.0 15.0 17.0 18.5 20.0 22.0 17.0 20.0 22.0 25.0 30.0 37.0 26.5 26.5 32.0 32.0 32.0 32.0 32.0 32.0 13.0 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 32.0 32.0 32.0 32.0 32.0 32.0 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 85 85 70 70 70 70 70 70 260 260 260 260 260 260 170 170 170 170 170 170 170 110 110 110 110 110 80 80 80 80 80 80 88,400 88,400 72,800 72,800 72,800 72,800 72,800 72,800 327,600 327,600 327,600 327,600 327,600 327,600 214,200 214,200 214,200 214,200 214,200 214,200 214,200 138,600 138,600 138,600 138,600 138,600 100,800 100,800 100,800 100,800 100,800 100,800 L Lead Spacing (S) Ød (mm) dV/dt (V/µs) Max K0 (V2/µs) H ESR max Lead Spacing (S) 10.0 13.0 9.0 11.0 13.0 14.0 18.0 22.0 4.0 4.0 4.0 5.0 6.0 6.0 5.0 5.0 6.0 7.5 8.5 11.0 11.0 6.0 8.5 10.0 11.0 13.0 9.0 11.0 13.0 13.0 16.0 22.0 T ESL KEMET Part Number Customer Part Number 71VN4220(1)H6(2) R71VN4220(1)H6(2) 71VN4330(1)H6(2) R71VN4330(1)H6(2) 71VR4220(1)H6(2) R71VR4220(1)H6(2) 71VR4330(1)H6(2) R71VR4330(1)H6(2) 71VR4470(1)H6(2) R71VR4470(1)H6(2) 71VR4680(1)H6(2) R71VR4680(1)H6(2) 71VR5100(1)H6(2) R71VR5100(1)H6(2) 71VR5150(1)H6(2) R71VR5150(1)H6(2) 71PF2330(1)H6(2) R71PF2330(1)H6(2) 71PF2470(1)H6(2) R71PF2470(1)H6(2) 71PF2680(1)H6(2) R71PF2680(1)H6(2) 71PF3100(1)H6(2) R71PF3100(1)H6(2) 71PF3150(1)H6(2) R71PF3150(1)H6(2) 71PF3220(1)H6(3) R71PF3220(1)H6(3) 71PI3150(1)H6(2) R71PI3150(1)H6(2) 71PI3220(1)H6(2) R71PI3220(1)H6(2) 71PI3330(1)H6(2) R71PI3330(1)H6(2) 71PI3470(1)H6(2) R71PI3470(1)H6(2) 71PI3680(1)H6(2) R71PI3680(1)H6(2) 71PI4100(1)H6(2) R71PI4100(1)H6(2) 71PI4150(1)H6(4) R71PI4150(1)H6(4) 71PN3680(1)H6(2) R71PN3680(1)H6(2) 71PN4100(1)H6(2) R71PN4100(1)H6(2) 71PN4150(1)H6(2) R71PN4150(1)H6(2) 71PN4220(1)H6(2) R71PN4220(1)H6(2) 71PN4330(1)H6(2) R71PN4330(1)H6(2) 71PR4150(1)H6(2) R71PR4150(1)H6(2) 71PR4220(1)H6(2) R71PR4220(1)H6(2) 71PR4330(1)H6(2) R71PR4330(1)H6(2) 71PR4470(1)H6(4) R71PR4470(1)H6(4) 71PR4680(1)H6(2) R71PR4680(1)H6(2) 71PR5100(1)H6(2) R71PR5100(1)H6(2) KEMET Part Number Customer Part Number (1) Insert lead and packaging code. See table for available options. (2) J=5%, K = 10%, M = 20% (3) M = ±20% (only available tolerance) (4) K = 10%, M = ±20% (only available tolerance) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3130_R71H • 4/30/2021 10 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R71, 125°C Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183°C for SnPb eutectic alloy to 217 – 221°C for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170°C). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm), and great care has to be taken during soldering. The recommended solder profiles from KEMET should be used. Please consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760–1 Edition 2 serves as a solid guideline for successful soldering. Please see Figure 1. Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the above recommended limits may result in degradation or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through-hole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle. Manual Soldering Recommendations Wave Soldering Recommendations 300 Following is the recommendation for manual soldering with a soldering iron. 2+3 seconds maximum 260°C 250 Second Wave First Wave Recommended Soldering Temperature Temperature (°C) 200 400 Soldering Iron Bit Temperature (°C) 350 300 ∆ T < 150°C Cooling Preheating 150 ca. 2°C/second ca. 3.5°C/second typical ca. 5°C/second Tpreheat 100 Typical 250 50 200 150 0 100 0 40 80 120 160 200 240 Time (seconds) 50 0 0 1 2 3 4 5 6 7 8 Soldering Time (seconds) The soldering iron tip temperature should be set at 350°C (+10°C maximum) with the soldering duration not to exceed more than 3 seconds. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3130_R71H • 4/30/2021 11 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R71, 125°C Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Soldering Process cont. Wave Soldering Recommendations cont. 1. The table indicates the maximum set-up temperature of the soldering process Figure 1 Film Material Single Metallized HT Polypropylene Maximum Preheat Temperature Maximum Peak Soldering Temperature Capacitor Pitch ≤ 15 mm Capacitor Pitch > 15 mm Capacitor Pitch ≤ 15 mm Capacitor Pitch > 15 mm 125°C 130°C 260°C 270°C 2. The maximum temperature measured on the capacitor body: Set the temperature so that the maximum temperature is below the limit: Film Material Maximum Temperature Measured on the Capacitor Body Single Metallized Polypropylene 120°C (for series R71H) Sensor Position Duration: < 60 seconds Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as in normal flow soldering without touching the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected components, and pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document, however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than in double wave flow soldering, and great care must be taken so that the parts are not overheated. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3130_R71H • 4/30/2021 12 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R71, 125°C Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Mounting Resistance to Vibration and Mechanical Shock AEC-Q200 Mechanical Stress Tests: Mechanical Shock Vibration MIL-SDT-202 Method 213 Test condition C Peak value 100 g, duration 6 ms, half-sine-wave (see MIL-HDBK for details) MIL-SDT-202 Method 204 5 g for 20 minutes, 12 cycles each of 3 orientations Use 8"X5" PCB, 0.031" thick. 7 secure points on one 8" side and 2 secure points at corners of opposite sides. Parts mounted within 2" from any secure point. Test from 10 – 2,000 Hz. The capacitors are designed for PCB mounting. The stand-off pipes must be in good contact with the printed circuit board. The capacitors with pitch ≤ 22.5 mm can be mechanically fixed by the leads, for pitch > 22.5 mm, the capacitor body has to be properly fixed (e.g. clamped or glued). Construction Single-sided Metallized Polypropylene Film (First Layer) Molded Plastic Case Detailed Cross Section Molded Plastic Case Self-Extinguishing Resin Single-sided Metallized Polypropylene Film (Second Layer) Margin Margin Metal Contact Layer Metal Contact Layer Margin FILM WINDING SCHEME OPTIONS Leads Single-sided Metallized Polypropylene Film Double-sided Winding Scheme Single-sided Metallized Polypropylene Film 1 Section Single-sided Metallized Polypropylene Film Double-sided Metallized Polyester Carrier Film 2 Sections 1 Section © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Single-sided Polypro Film Die Single-sided F3130_R71H • 4/30/2021 Double-sided 13 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R71, 125°C Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Marking Pitch – 10, 15 & 22.5 FRONT TOP KEMET Logo Series Capacitance Tolerance Dielectric Climatic Category Date Code Manufacturing Plant Code Capacitance Voltage Code Pitch – 10, 15 & 22.5 Alternatives* FRONT TOP Capacitance Tolerance Series KEMET Logo Dielectric Climatic Category Date Code Manufacturing Plant Code Capacitance Voltage Code Pitch – 10, 15 & 22.5 Alternatives* FRONT TOP KEMET Logo Capacitance Tolerance Series Dielectric Climatic Category Date Code Manufacturing Plant Code Capacitance Voltage Code * Differences are caused by technology (clichee, laser or ink jet) and technic (production line). © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3130_R71H • 4/30/2021 14 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R71, 125°C Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Marking cont. Pitch – 10, 15, 22.5 Alternatives* & 27.5 FRONT TOP Series Capacitance Tolerance KEMET Logo Dielectric Rated Voltage Capacitance Date Code Climatic Category Manufacturing Plant Code Pitch – 27.5 Alternatives* FRONT TOP Capacitance Tolerance Series KEMET Logo Dielectric Rated Voltage Capacitance Climatic Category Manufacturing Plant Code QA-Number Date Code * Differences are caused by technology (clichee, laser, or ink) and technic (production line) Manufacturing Date Code (IEC–60062) Year Code Year Code Month Code Month Code 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 A B C D E F H J K L 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 M N P R S T U V W X January February March April May June 1 2 3 4 5 6 July August September October November December 7 8 9 O N D © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3130_R71H • 4/30/2021 15 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R71, 125°C Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Packaging Quantities Lead Spacing Thickness Height (mm) (mm) Length Bulk (mm) Short Leads Lead and Packaging Code AA – JB JE – JH Bulk Long Leads Standard Reel ø 355 mm Large Reel ø 500 mm Ammo Taped JM 40 – 50 GY CK DQ 2,000 1,300 1,000 2,200 2,000 1,800 1,800 1,500 1,200 750 600 500 1,500 1,250 1,000 1,000 800 680 10 4.0 5.0 6.0 9.0 11.0 12.0 13.0 13.0 13.0 15 5.0 6.0 6.0 7.5 7.5 8.5 9.0 10.0 11.0 13.0 11.0 12.0 17.5 13.5 18.5 14.5 12.5 16.0 19.0 12.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 2,000 1,750 1,000 1,000 900 1,000 1,000 750 450 750 1,250 1,000 1,500 800 650 650 700 550 400 520 1,000 900 700 700 500 500 520 500 350 490 600 500 500 350 350 300 270 270 270 200 1,250 1,000 1,000 800 800 700 650 600 500 480 800 680 680 500 500 440 410 380 340 280 22.5 6.0 7.0 8.5 10.0 11.0 13.0 15.0 16.0 17.0 18.5 20.0 22.0 26.5 26.5 26.5 26.5 26.5 26.5 805 700 468 396 360 300 450 450 350 350 200 150 500 500 300 300 250 200 300 250 250 160 190 130 700 550 450 350 350 300 464 380 280 235 217 - 27.5 9.0 11.0 13.0 13.0 13.0 14.0 18.0 22.0 24.0 17.0 20.0 12.0 22.0 25.0 28.0 33.0 37.0 15.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 816 560 672 480 480 352 256 168 336 - 408 336 288 288 288 176 128 112 144 230 190 150 - 450 350 300 300 - - © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3130_R71H • 4/30/2021 16 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R71, 125°C Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Lead Taping & Packaging (IEC 60286–2) Lead Spacing 10 & 15 mm P Lead Spacing 22.5 & 27.5 mm ∆h P2 W2 H0 W0 F P1 P0 P ∆h Ød W1 A B W D0 P1 A-B P2 t Taping Specification Description Dimensions (mm) Symbol 10.0 Lead Spacing 15.0 22.5 27.5 Tolerance Lead wire diameter d 0.6 0.6 – 0.8 0.8 0.8 ±0.05 Taping lead space P 25.4 25.4 38.1 38.1 ±1 Feed hole lead space * P0 12.7 12.7 12.7 12.7 ±0.2 ** Centering of the lead wire P1 7.7 5.2 7.8 5.3 ±0.7 Centering of the body P2 12.7 12.7 19.05 19.05 ±1.3 Lead spacing *** F 10.0 15.0 22.5 27.5 +0.6/−0.1 Component alignment ∆h 0 0 0 0 ±2 Component deviation ∆p 0 0 0 0 ±1 Height of component from tape center H0 **** 18.5 18.5 18.5 18.5 ±0.5 Carrier tape width W 18 18 18 18 +1/−0.5 Hold down tape width W0 9 10 10 10 Minimum Hole position W1 9 9 9 9 ±0.5 Hold down tape position W2 3 3 3 3 Maximum Feed hole diameter D0 4 4 4 4 ±0.2 Total tape thickness t 0.7 0.7 0.7 0.7 ±0.2 * Available also 15 mm. ** Maximum 1 mm on 20 lead spacing. *** 15 mm and 10 mm taped to 7.5 mm (crimped leads) available upon request. **** H0 = 16.5 mm is available upon request. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3130_R71H • 4/30/2021 17 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R71, 125°C Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Lead Taping & Packaging (IEC 60286–2) cont. Ammo Specifications Dimensions (mm) H W T 360 340 59 H T Reel Specifications W Dimensions (mm) D H W 355 500 30 25 55 Maximum D H W © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3130_R71H • 4/30/2021 18 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R71, 125°C Single Metallized Polypropylene Film, Radial, SMPS PFC Applications KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3130_R71H • 4/30/2021 19