R76PN3220SE30J

Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Overview Applications The R76 series is constructed of polypropylene film and double metallized polyester film as electrodes with radial leads of tinned wire. The radial leads are electrically welded to the metal layer on the ends of the capacitor winding. The capacitor is encapsulated in a selfextinguishing solvent resistant plastic case with thermosetting resin material meeting UL 94 V–0 requirements. Two different winding constructions are used depending on voltage parameters. Please see the Performance Characteristics for more information. Typical applications include resonant circuit, high frequency high current, snubber and silicon-controlled rectifier (SCR and IGBT) and SiC (e.g. MOSFET) commutation circuits as well as applications with high voltage and high current. Not suitable for across-the-line application (see Suppressor Capacitors). Automotive grade devices (up to lead spacing 22.5 mm) meet the demanding Automotive Electronics Council's AEC–Q200 qualification requirements. Benefits • Voltage range: 250 – 2,000 VDC • Capacitance range: 100 pF – 12 µF • Lead Spacing: 7.5 mm – 37.5 mm • Capacitance tolerance: ±2.5%, ±5%, ±10% • Climatic category: 55/110/56 IEC 60068–1 • Operating temperature range of −55°C to +110°C • RoHS compliance and lead-free terminations • Tape & Reel packaging in accordance with IEC 60286–2 • Self-healing • Automotive (AEC–Q200) grades available up to lead spacing 22.5 mm Part Number System R76 Series Double Metallized Polypropylene I D 1680 Rated Voltage (VDC) I = 250 M = 400 P = 630 Q = 1,000 T = 1,600 U = 2,000 Lead Spacing (mm) D = 7.5 F = 10 I = 15 N = 22.5 R = 27.5 W = 37.5 Capacitance Code (pF) The last three digits represent significant figures. The first digit specifies the total number of zeros to be added. SE 30 Packaging See Ordering Options Table K Internal Use 00 10 20 30 40 50 60 70 80 L0 Capacitance Tolerance H = ±2.5% (*) J = ±5% K = ±10% (*) = for C ≥ 1,000 pF Built Into Tomorrow © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 1 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Ordering Options Table Lead Spacing Nominal (mm) Lead Length (mm) Lead and Packaging Code 4 +2/−0 H0 = 18.5±0.5 SE DQ H0 = 18.5±0.5 2.7 +0.5/−0 3.5 +0.5/−0 4.0 +0.5/−0 3.2 +0.3/−0.2 18±1 17 +1/−2 CK JA JB JE JH JM Z3 4 +2/−0 H0 = 18.5±0.5 SE DQ Tape & Reel (Standard Reel Ø 355 mm) H0 = 18.5±0.5 GY Tape & Reel (Large Reel Ø 500 mm) H0 = 18.5±0.5 CK Bulk (Bag) – Short Leads 2.7 +0.5/−0 JA Bulk (Bag) – Short Leads 3.5 +0.5/−0 JB Bulk (Bag) – Short Leads 10±1 JC Bulk (Bag) – Short Leads 4.0 +0.5/−0 JE Bulk (Bag) – Short Leads 3.2 +0.3/−0.2 JH Bulk (Bag) – Long Leads 18±1 JM Bulk (Bag) – Long Leads 30 +5/−0 40 Bulk (Bag) – Long Leads 25 +2/−1 50 4 +2/−0 SE H0 = 18.5±0.5 H0 = 18.5±0.5 3.5 +0.5/−0 4.0 +0.5/−0 3.2 +0.3/−0.2 30 +5/−0 25 +2/−1 GY CK1 JB JE JH 40 50 Type of Leads and Packaging Standard Lead and Packaging Options Bulk – Short Leads Ammo Pack Other Lead and Packaging Options 7.5 Tape & Reel (Standard Reel Ø 355 mm) Bulk – Short Leads Bulk – Short Leads Bulk – Short Leads Bulk – Short Leads Bulk – Long Leads Bulk – Long Leads Standard Lead and Packaging Options Bulk (Bag) – Short Leads Ammo Pack Other Lead and Packaging Options 10 15 22.5 Standard Lead and Packaging Options Bulk (Tray) – Short Leads Other Lead and Packaging Options 27.5 1 Tape & Reel (Standard Reel Ø 355 mm) Tape & Reel (Large Reel Ø 500 mm) Bulk (Tray) – Short Leads Bulk (Tray) – Short Leads Bulk (Tray) – Short Leads Bulk (Tray) – Long Leads Bulk (Tray) – Long Leads = Not for all sizes, see "Packaging Quantities" table. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 2 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Ordering Options Table cont. Lead Spacing Nominal (mm) Type of Leads and Packaging Lead Length (mm) Lead and Packaging Code 4 +2/−0 SE 3.5 +0.5/−0 4.0 +0.5/−0 3.2 +0.3/−0.2 30 +5/−0 25 +2/−1 JB JE JH 40 50 Standard Lead and Packaging Options Bulk (Tray) – Short Leads Other Lead and Packaging Options Bulk (Tray) – Short Leads Bulk (Tray) – Short Leads Bulk (Tray) – Short Leads Bulk (Tray) – Long Leads Bulk (Tray) – Long Leads 37.5 Dimensions – Millimeters Loose Taped L T H H0 S LL F P2 P2 S T P2 H L F Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 7.5 7.5 7.5 7.5 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 3.0 4.0 5.0 6.0 4.0 5.0 6.0 4.0 5.0 6.0 7.5 8.5 9.0 10.0 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 8.0 9.0 10.5 12.0 9.0 11.0 12.0 10.0 11.0 12.0 13.5 14.5 12.5 16.0 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 10.0 10.0 10.0 10.5 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.5/−0.5 +0.5/−0.5 +0.5/−0.5 +0.5/−0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 Note: See Ordering Options Table for lead length (LL/Ho) options. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 3 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Dimensions – Millimeters cont. Loose Taped L T H H0 S LL F P2 P2 S T P2 H L F Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 11.0 13.0 6.0 7.0 8.5 10.0 11.0 13.0 14.5 9.0 11.0 13.0 13.0 14.0 16.0 18.0 22.0 24.0 11.0 13.0 16.0 19.0 20.0 24.0 24.0 24.0 30.0 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.5 +0.2/−0.7 +0.2/−0.7 +0.2/−0.7 +0.2/−0.7 +0.2/−0.7 +0.2/−0.7 +0.2/−0.7 +0.2/−0.7 +0.2/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 19.0 12.0 15.0 16.0 17.0 18.5 20.0 22.0 29.5 17.0 20.0 22.0 25.0 28.0 30.0 33.0 37.0 15.0 22.0 24.0 28.5 32.0 40.0 44.0 15.0 19.0 45.0 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 +0.1/−0.7 18.0 18.0 26.5 26.5 26.5 26.5 26.5 26.5 26.5 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 +0.5/−0.5 +0.5/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 +0.3/−0.7 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 Note: See Ordering Options Table for lead length (LL/Ho) options. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 4 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Performance Characteristics Dielectric Plates Winding Leads Protection Related Documents Polypropylene film Double sided metallized polyester film Non-inductive type Tinned wire Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94. IEC 60384–16 Sections Rated Voltage VR Capacitance Range (µF) Capacitance Values Capacitance Tolerance Operating Temperature Range Rated Temperature TR Voltage Derating Climatic Category 1 2 250 VDC 180 VAC 400 VDC 250 VAC 630 VDC 250 VAC 630 VDC 400 VAC 0.0068– 12 0.0027 – 8.2 0.00068 – 0.012 0.0039 – 3.9 1,000 VDC 400 VAC 1,000 VDC 600 VAC 0.00022 – 0.0033 0.00047 – 2.2 1,600 VDC 650 VAC 2,000 VDC 700 VAC 0.0022 – 1.2 0.0001 – 0.56 E12 series (IEC 60063) measured at 1 kHz and +20±1°C ±2.5%, ±5%, ±10% −55°C to +110°C +85°C for VR (DC and AC) The following decreasing factor has to be applied on the rated voltage: +85°C to +110°C: 1.25% per °C for VR (DC and AC) 55/110/56 IEC 60068–1 Storage time: ≤ 24 months from the date marked on the label package Average relative humidity per year ≤ 70% Storage Conditions RH ≤ 85% for 30 days randomly distributed throughout the year Dew is absent Temperature: −40 to 80°C (see "Maximum Humidity in Storage Conditions" graph below) Test Voltage Capacitance Drift Maximum Pulse Steepness 1.6 x VR VDC for 2 seconds (between terminations) at +25°C ±5°C Maximum 0.5% after a 2 year storage period at a temperature of +10°C to +40°C and a relative humidity of 40% to 60% dV/dt according to Table 1. For working voltages lower than rated voltage (V < VR), the specified dV/dt can be multiplied by the factor VR /V. Operational life > 200,000 hours at 85°C Reliability (Reference IEC 61709) Failure rate ≤ 1 FIT, T = +40°C, V = 0.5 x VR Failure criteria: open or short circuit, cap. change > 10%, DF 2 times the catalog limits, IR < 0.005 x initial limit Temperature Coefficient Self-Inductance (Lead Length ~ 2 mm) −(200±100) ppm/°C at 1 kHz Lead Spacing (mm) 7.5 10 15 22.5 27.5 37.5 L (nH) ≈ 8 9 10 16 18 20 Max 1 nH per 1 mm lead and capacitor length © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 5 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Performance Characteristics cont. Measured at 25°C ±5°C Dissipation Factor tanδ Frequency C ≤ 0.1 µF 0.1 µF < C ≤ 1.0 µF C > 1µF 1 kHz ≤ 0.03% ≤ 0.03% ≤ 0.04% 10 kHz ≤ 0.04% ≤ 0.06% – 100 kHz ≤ 0.10% – – Measured at +25°C, 100 VDC 60 seconds Minimum Values Between Terminals Insulation Resistance C ≤ 0.33 μF C > 0.33 μF ≥ 100,000 MΩ ( ≥ 500,000 MΩ )* ≥ 30,000 MΩ • µF ( ≥ 150,000 MΩ • µF )* * Typical value Maximum Humidity in Storage Condition 100 45 40 80 35 70 30 60 ∆Tlim (°C) 50 40 30 Days Annual Average 30 20 20 15 10 5 10 0 25 0 −40 −20 0 20 Temperature (°C) 40 60 80 110 120 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 Relative Humidity (%) 90 Maximum Overtemperature ∆Tlim vs Th Temperature Th(°C) Maximum Irms vs. Th 160% 140% Maximum Irms 120% 100% 80% 60% 40% 20% 0% 60 70 80 90 Temperature Th(°C) 100 Th is the maximum ambient temperature surrounding the capacitor or hottest contact point (e.g. tracks), whichever is higher, in the worst operation conditions in °C. Qualification Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AEC–Q200, Stress Test Qualification for Passive Components. For additional information regarding the Automotive Electronics Council and AEC–Q200, please visit their website at www.aecouncil.com. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 6 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Maximum Voltage (Vrms) Versus Frequency (Sinusoidal Waveform/Th ≤ 85°C) 400 Vdc / 250 Vac 250 Vdc / 180 Vac 100 100 Voltage (Vrms) 1,000 Voltage (Vrms) 1,000 0.015 µF p = 7.5 0.033 µF p = 10 0.1 µF p = 15 0.47 µF p = 22.5 2.2 µF p = 27.5 5.6 µF p = 37.5 10 1 0 1 10 Frequency (kHz) 100 1,000 0.015 µF p = 7.5 0.047 µF p = 10 0.1 µF p = 15 0.22 µF p = 22.5 1 µF p = 27.5 5.6 µF p = 37.5 10 1 0 1 630 VDC/400 VAC 100 Voltage (Vrms) 100 Voltage (Vrms) 1,000 1 2200 pF p=7.5 0.033 µF p=15 0.1 µF p=22.5 0.22 µF p=27.5 0.47 µF p=37.5 2.2 µF p=37.5 0.1 1 100 1 1000 0.1 1 1,600 VDC/650 VAC 100 Voltage (Vrms) 100 Voltage (Vrms) 1,000 1 3300 pF p=15 0.01 µF p=15 0.047 µF p=22.5 0.22 µF p=27.5 0.33 µF p=27.5 1.5 µF p=37.5 0.1 1 100 1000 100 1000 1000 pF p=15 0.01 µF p=15 0.022 µF p=22.5 0.047 µF p=27.5 0.1 µF p=27.5 0.47 µF p=37.5 10 10 Frequency (kHz) 10 Frequency (kHz) 2,000 VDC/700 VAC 1,000 10 1,000 1000 pF p=7.5 0.015 µF p=15 0.047 µF p=22.5 0.22 µF p=27.5 0.47 µF p=27.5 1.5 µF p=37.5 10 10 Frequency (kHz) 100 1,000 VDC/600 VAC 1,000 10 10 Frequency (kHz) 100 1000 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 1 0.1 1 10 Frequency (kHz) F3034_R76 • 8/14/2023 7 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Maximum Current (Irms) Versus Frequency (Sinusoidal Waveform/Th ≤ 85°C) 250 Vdc / 180 Vac 400 Vdc / 250 Vac 10 10 Current (Arms) 100 Current (Arms) 100 1 0.015 µF p = 7.5 0.033 µF p = 10 0.1 µF p = 15 0.47 µF p = 22.5 2.2 µF p = 27.5 5.6 µF p = 37.5 0.1 1 0.015 µF p = 7.5 0.047 µF p = 10 0.1 µF p = 15 0.22 µF p = 22.5 1 µF p = 27.5 5.6 µF p = 37.5 0.1 0.01 0.01 0 1 10 Frequency (kHz) 100 1,000 0 1 10 10 Current (Arms) 100 Current (Arms) 100 1 2200 pF p=7.5 0.033 µF p=15 0.1 µF p=22.5 0.22 µF p=27.5 0.47 µF p=37.5 2.2 µF p=37.5 1,000 1 1000 pF p=7.5 0.015 µF p=15 0.047 µF p=22.5 0.22 µF p=27.5 0.47 µF p=27.5 1.5 µF p=37.5 0.1 0.01 0.01 0.1 1 10 Frequency (kHz) 100 1000 0.1 1 10 10 Current (Arms) 100 1 3300 pF p=15 0.01 µF p=15 0.047 µF p=22.5 0.22 µF p=27.5 0.33 µF p=27.5 1.5 µF p=37.5 0.1 10 Frequency (kHz) 100 1000 2,000 VDC/700 VAC 1,600 VDC/650 VAC 100 Current (Arms) 100 1,000 VDC/600 VAC 630 VDC/400 VAC 0.1 10 Frequency (kHz) 1 1000 pF p=15 0.01 µF p=15 0.022 µF p=22.5 0.047 µF p=27.5 0.1 µF p=27.5 0.47 µF p=37.5 0.1 0.01 0.01 0.1 1 10 Frequency (kHz) 100 1000 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 0.1 1 10 Frequency (kHz) 100 F3034_R76 • 8/14/2023 1000 8 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Environmental Test Data Damp Heat, Steady State Test Test Conditions: Temperature: Relative humidity (RH): Test duration: Endurance Test +40°C ±2°C 93% ±2% 56 days Test Conditions Temperature: Voltage applied: Test duration: Resistance to Soldering Heat Test +85°C ±2°C 1.25 x VR (DC) 2,000 hours Test Conditions Solder bath temperature: Dipping time (with heat screen): 260°C ±5°C 10 seconds ±1 second Performances |Δ C/C| ≤ 2%, Δ tanδ ≤ 0.001 at 1 kHz IR after test ≥ 50% of initial limit Performances |Δ C/C| ≤ 2%, Δ tanδ ≤ 0.001 at 10 kHz for C ≤ 1 µF Δ tanδ ≤ 0.001 at 1 kHz for C > 1 µF IR after test ≥ 50% of initial limit Performances |Δ C/C| ≤ 1%, Δ tanδ ≤ 0.001 at 10 kHz for C ≤ 1 µF Δ tanδ ≤ 0.001 at 1 kHz for C > 1 µF IR after test ≥ initial limit Environmental Compliance All KEMET pulse capacitors are RoHS compliant. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 9 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Table 1 – Ratings & Part Number Reference VDC VAC Cap Value (µF) 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.068 0.082 0.1 0.12 0.15 0.18 0.18 0.22 0.22 0.27 0.27 0.33 0.33 0.39 0.47 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1 1.2 1.5 1.8 0.82 1 1 1.2 VDC VAC Cap Value Dimensions in mm T H L 3.0 3.0 3.0 4.0 4.0 4.0 4.0 5.0 5.0 6.0 6.0 4.0 4.0 4.0 5.0 5.0 6.0 6.0 5.0 5.0 5.0 6.0 6.0 7.5 9.0 7.5 9.0 8.5 9.0 10.0 13.0 10.0 11.0 6.0 6.0 6.0 7.0 7.0 8.5 10.0 10.0 11.0 13.0 14.5 14.5 9.0 11.0 24.0 11.0 8.0 8.0 8.0 9.0 9.0 9.0 9.0 10.5 10.5 12.0 12.0 9.0 9.0 9.0 11.0 11.0 12.0 12.0 11.0 11.0 11.0 12.0 12.0 13.5 12.5 13.5 12.5 14.5 12.5 16.0 12.0 16.0 19.0 15.0 15.0 15.0 16.0 16.0 17.0 18.5 18.5 20.0 22.0 29.5 29.5 17.0 20.0 15.0 20.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.5 10.5 13.0 13.0 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 32.0 32.0 32.0 32.0 T H L Lead Spacing (S) dV/dt (V/µs) Max K0 (V2/µs) 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 1,100 1,100 1,100 1,100 1,100 1,100 1,100 1,100 1,100 1,100 1,100 1,000 1,000 1,000 1,000 1,000 1,000 1,000 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 300 300 300 300 300 300 300 300 300 300 300 300 200 200 200 200 550,000 550,000 550,000 550,000 550,000 550,000 550,000 550,000 550,000 550,000 550,000 500,000 500,000 500,000 500,000 500,000 500,000 500,000 275,000 275,000 275,000 275,000 275,000 275,000 275,000 275,000 275,000 275,000 275,000 275,000 275,000 275,000 275,000 150,000 150,000 150,000 150,000 150,000 150,000 150,000 150,000 150,000 150,000 150,000 150,000 100,000 100,000 100,000 100,000 Lead Spacing (S) dV/dt (V/µs) Max K0 (V2/µs) ESL ESR max Irms max (*) Ipkr Lead Length 2x 4 mm at 100 kHz at 100 kHz 85°C Apk nH mΩ 8 8 8 8 8 8 8 8 8 8 8 9 9 9 9 9 9 9 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 16 16 16 16 16 16 16 16 16 16 16 16 18 18 18 18 94 78 64 53 42 35 29 24 19 16 14 24 19 16 14 20 16 14 16 14 11 13 11 9 9 7 7 6 6 5 5 4 3 11 9 7 8 7 6 4.7 3.9 5.6 4.6 3.7 3.1 6 6 6 5.3 Arms (°C/W) 7 9 11 13 17 20 24 30 36 43 52 27 33 39 47 56 68 82 37 45 55 66 83 99 99 121 121 149 149 182 182 215 259 66 81 99 117 141 168 204 246 300 360 450 540 164 200 200 240 0.8 0.9 1.1 1.4 1.7 2.0 2.5 3.1 3.6 4.2 4.6 3.1 3.6 3.9 4.6 3.8 4.4 4.8 4.5 4.9 5.5 5.2 5.8 6.7 6.8 7.4 7.5 8.4 8.3 9.7 9.6 10.5 12.1 6.5 7.2 8.0 7.7 8.5 9.6 10.9 12.0 10.3 11.7 14.1 15.4 9.9 10.7 11.5 11.0 98 98 98 88 88 88 88 78 78 69 69 79 79 79 69 69 64 64 60 60 60 56 56 51 50 51 50 48 50 44 45 44 40 43 43 43 41 41 38 36 36 34 31 27 27 35 31 27 31 Apk Lead Length 2x 4 mm at 100 kHz at 100 kHz 85°C (°C/W) Ipkr ESL ESR max Irms max (*) Rth Rth KEMET Internal Part Number Customer Part Number 76ID1680(1)30(2) 76ID1820(1)30(2) 76ID2100(1)30(2) 76ID2120(1)40(2) 76ID2150(1)40(2) 76ID2180(1)40(2) 76ID2220(1)40(2) 76ID2270(1)40(2) 76ID2330(1)40(2) 76ID2390(1)30(2) 76ID2470(1)30(2) 76IF2270(1)30(2) 76IF2330(1)30(2) 76IF2390(1)30(2) 76IF2470(1)30(2) 76IF2560(1)30(2) 76IF2680(1)30(2) 76IF2820(1)30(2) 76II2680(1)30(2) 76II2820(1)30(2) 76II3100(1)30(2) 76II3120(1)30(2) 76II3150(1)30(2) 76II3180(1)30(2) 76II3180(1)70(2) 76II3220(1)30(2) 76II3220(1)70(2) 76II3270(1)30(2) 76II3270(1)70(2) 76II3330(1)30(2) 76II3330(1)70(2) 76II3390(1)30(2) 76II3470(1)30(2) 76IN3220(1)00(2) 76IN3270(1)30(2) 76IN3330(1)30(2) 76IN3390(1)30(2) 76IN3470(1)30(2) 76IN3560(1)30(2) 76IN3680(1)30(2) 76IN3820(1)30(2) 76IN4100(1)30(2) 76IN4120(1)30(2) 76IN4150(1)30(2) 76IN4180(1)30(2) 76IR3820(1)30(2) 76IR4100(1)30(2) 76IR4100(1)L0(2) 76IR4120(1)40(2) R76ID1680(1)30(2) R76ID1820(1)30(2) R76ID2100(1)30(2) R76ID2120(1)40(2) R76ID2150(1)40(2) R76ID2180(1)40(2) R76ID2220(1)40(2) R76ID2270(1)40(2) R76ID2330(1)40(2) R76ID2390(1)30(2) R76ID2470(1)30(2) R76IF2270(1)30(2) R76IF2330(1)30(2) R76IF2390(1)30(2) R76IF2470(1)30(2) R76IF2560(1)30(2) R76IF2680(1)30(2) R76IF2820(1)30(2) R76II2680(1)30(2) R76II2820(1)30(2) R76II3100(1)30(2) R76II3120(1)30(2) R76II3150(1)30(2) R76II3180(1)30(2) R76II3180(1)70(2) R76II3220(1)30(2) R76II3220(1)70(2) R76II3270(1)30(2) R76II3270(1)70(2) R76II3330(1)30(2) R76II3330(1)70(2) R76II3390(1)30(2) R76II3470(1)30(2) R76IN3220(1)00(2) R76IN3270(1)30(2) R76IN3330(1)30(2) R76IN3390(1)30(2) R76IN3470(1)30(2) R76IN3560(1)30(2) R76IN3680(1)30(2) R76IN3820(1)30(2) R76IN4100(1)30(2) R76IN4120(1)30(2) R76IN4150(1)30(2) R76IN4180(1)30(2) R76IR3820(1)30(2) R76IR4100(1)30(2) R76IR4100(1)L0(2) R76IR4120(1)40(2) KEMET Internal Part Number Customer Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (2) H = 2.5% (only for C ≥ 1,000 pF), J = 5%, K = 10% (*) Irms value that leads to a ΔT of ≈ 20°C in the hot spot > THS = TAMB + ΔT = 85°C + 20°C = 105°C © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 10 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Table 1 – Ratings & Part Number Reference cont. VDC VAC Cap Value (µF) 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 1.2 1.5 1.5 1.8 1.8 2.2 2.7 2.7 3.3 3.9 4.7 5.6 1.2 1.5 1.5 1.8 1.8 2.2 2.2 2.7 2.7 3.3 3.3 3.9 4.7 5.6 6.8 8.2 10 12 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.01 0.012 0.015 0.018 0.022 VDC VAC Cap Value Dimensions in mm Lead Spacing (S) dV/dt (V/µs) Max K0 (V2/µs) 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 1,700 1,700 1,700 1,700 1,700 1,700 1,700 1,700 1,700 1,700 1,700 1,700 1,700 1,500 1,500 1,500 1,500 1,500 100,000 100,000 100,000 100,000 100,000 100,000 100,000 100,000 100,000 100,000 100,000 100,000 50,000 50,000 50,000 50,000 50,000 50,000 50,000 50,000 50,000 50,000 50,000 50,000 50,000 50,000 50,000 50,000 50,000 50,000 1,360,000 1,360,000 1,360,000 1,360,000 1,360,000 1,360,000 1,360,000 1,360,000 1,360,000 1,360,000 1,360,000 1,360,000 1,360,000 1,200,000 1,200,000 1,200,000 1,200,000 1,200,000 T H L 24.0 13.0 24.0 13.0 24.0 14.0 18.0 16.0 18.0 18.0 22.0 22.0 11.0 11.0 24.0 11.0 24.0 13.0 24.0 16.0 24.0 16.0 24.0 16.0 19.0 20.0 20.0 24.0 24.0 30.0 3.0 3.0 3.0 3.0 3.0 4.0 4.0 4.0 4.0 5.0 5.0 6.0 6.0 4.0 4.0 4.0 4.0 4.0 15.0 22.0 15.0 25.0 15.0 28.0 33.0 30.0 33.0 33.0 37.0 37.0 22.0 22.0 15.0 22.0 15.0 24.0 15.0 28.5 19.0 28.5 19.0 28.5 32.0 40.0 40.0 44.0 44.0 45.0 8.0 8.0 8.0 8.0 8.0 9.0 9.0 9.0 9.0 10.5 10.5 12.0 12.0 9.0 9.0 9.0 9.0 9.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.5 10.5 13.0 13.0 13.0 13.0 13.0 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 10.0 10.0 10.0 10.0 10.0 L Lead Spacing (S) T H dV/dt (V/µs) Max K0 (V2/µs) ESL ESR max Irms max (*) Ipkr Lead Length 2x 4 mm at 100 kHz at 100 kHz 85°C Apk nH mΩ Arms (°C/W) 240 300 300 360 360 440 540 540 660 780 940 1,120 120 150 150 180 180 220 220 270 270 330 330 390 470 560 680 820 1,000 1,200 5 6 7 8 10 12 14 17 20 26 31 37 46 15 18 23 27 33 18 18 18 18 18 18 18 18 18 18 18 18 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 8 8 8 8 8 8 8 8 8 8 8 8 8 9 9 9 9 9 5 4.2 4 5.3 5 4.3 7.1 7.1 5.8 4.9 4.1 3.4 5.3 4.2 4.2 5.3 5.3 4.3 4.3 7.1 7.1 5.8 5.8 4.9 4.1 3.4 7.0 5.8 4.8 9.9 236 193 163 135 114 94 78 64 53 42 35 29 24 64 53 42 35 29 11.8 12.7 13.2 11.7 11.8 13.3 11.1 10.7 12.3 13.3 15.4 16.8 11.8 13.2 13.9 11.8 12.4 13.5 13.7 11.2 11.1 12.4 12.3 13.5 15.4 17.7 12.3 14.1 15.6 11.2 0.4 0.5 0.6 0.7 0.9 1.1 1.3 1.6 1.9 2.4 2.7 3.2 3.5 1.6 1.9 2.4 2.7 3.0 27 29 27 28 27 26 23 25 23 23 21 21 27 27 24 27 24 25 24 23 23 23 23 23 21 19 19 17 17 16 98 98 98 98 98 88 88 88 88 78 78 69 69 79 79 79 79 79 Apk Lead Length 2x 4 mm at 100 kHz at 100 kHz 85°C (°C/W) Ipkr ESL ESR max Irms max (*) Rth Rth KEMET Internal Part Number Customer Part Number 76IR4120(1)L0(2) 76IR4150(1)30(2) 76IR4150(1)L0(2) 76IR4180(1)20(2) 76IR4180(1)L0(2) 76IR4220(1)40(2) 76IR4270(1)30(2) 76IR4270(1)40(2) 76IR4330(1)30(2) 76IR4390(1)30(2) 76IR4470(1)30(2) 76IR4560(1)40(2) 76IW4120(1)30(2) 76IW4150(1)30(2) 76IW4150(1)L0(2) 76IW4180(1)30(2) 76IW4180(1)L0(2) 76IW4220(1)30(2) 76IW4220(1)L0(2) 76IW4270(1)20(2) 76IW4270(1)L0(2) 76IW4330(1)30(2) 76IW4330(1)L0(2) 76IW4390(1)30(2) 76IW4470(1)30(2) 76IW4560(1)20(2) 76IW4680(1)30(2) 76IW4820(1)20(2) 76IW5100(1)30(2) 76IW5120(1)30(2) 76MD1270(1)30(2) 76MD1330(1)30(2) 76MD1390(1)30(2) 76MD1470(1)30(2) 76MD1560(1)30(2) 76MD1680(1)40(2) 76MD1820(1)40(2) 76MD2100(1)40(2) 76MD2120(1)40(2) 76MD2150(1)40(2) 76MD2180(1)40(2) 76MD2220(1)30(2) 76MD2270(1)30(2) 76MF2100(1)00(2) 76MF2120(1)00(2) 76MF2150(1)30(2) 76MF2180(1)30(2) 76MF2220(1)30(2) R76IR4120(1)L0(2) R76IR4150(1)30(2) R76IR4150(1)L0(2) R76IR4180(1)20(2) R76IR4180(1)L0(2) R76IR4220(1)40(2) R76IR4270(1)30(2) R76IR4270(1)40(2) R76IR4330(1)30(2) R76IR4390(1)30(2) R76IR4470(1)30(2) R76IR4560(1)40(2) R76IW4120(1)30(2) R76IW4150(1)30(2) R76IW4150(1)L0(2) R76IW4180(1)30(2) R76IW4180(1)L0(2) R76IW4220(1)30(2) R76IW4220(1)L0(2) R76IW4270(1)20(2) R76IW4270(1)L0(2) R76IW4330(1)30(2) R76IW4330(1)L0(2) R76IW4390(1)30(2) R76IW4470(1)30(2) R76IW4560(1)20(2) R76IW4680(1)30(2) R76IW4820(1)20(2) R76IW5100(1)30(2) R76IW5120(1)30(2) R76MD1270(1)30(2) R76MD1330(1)30(2) R76MD1390(1)30(2) R76MD1470(1)30(2) R76MD1560(1)30(2) R76MD1680(1)40(2) R76MD1820(1)40(2) R76MD2100(1)40(2) R76MD2120(1)40(2) R76MD2150(1)40(2) R76MD2180(1)40(2) R76MD2220(1)30(2) R76MD2270(1)30(2) R76MF2100(1)00(2) R76MF2120(1)00(2) R76MF2150(1)30(2) R76MF2180(1)30(2) R76MF2220(1)30(2) KEMET Internal Part Number Customer Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (2) H = 2.5% (only for C ≥ 1,000 pF), J = 5%, K = 10% (*) Irms value that leads to a ΔT of ≈ 20°C in the hot spot > THS = TAMB + ΔT = 85°C + 20°C = 105°C © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 11 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Table 1 – Ratings & Part Number Reference cont. VDC VAC Cap Value (µF) 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 0.027 0.027 0.033 0.039 0.039 0.047 0.047 0.056 0.068 0.033 0.039 0.047 0.056 0.068 0.068 0.082 0.1 0.1 0.1 0.12 0.12 0.15 0.15 0.15 0.18 0.18 0.18 0.22 0.27 0.27 0.33 0.39 0.12 0.15 0.18 0.22 0.22 0.27 0.27 0.33 0.39 0.39 0.47 0.56 0.56 0.68 0.68 0.82 VDC VAC Cap Value Dimensions in mm Lead Spacing (S) dV/dt (V/µs) Max K0 (V2/µs) 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 1,200,000 1,200,000 1,200,000 1,200,000 1,200,000 1,200,000 1,200,000 1,200,000 1,200,000 720,000 720,000 720,000 720,000 720,000 720,000 720,000 720,000 720,000 720,000 720,000 720,000 720,000 720,000 720,000 720,000 720,000 720,000 720,000 720,000 720,000 720,000 720,000 400,000 400,000 400,000 400,000 400,000 400,000 400,000 400,000 400,000 400,000 400,000 400,000 400,000 400,000 400,000 400,000 T H L 5.0 4.0 5.0 5.0 6.0 5.0 6.0 6.0 6.0 5.0 5.0 5.0 5.0 6.0 5.0 6.0 6.0 7.5 9.0 7.5 9.0 7.5 8.5 13.0 8.5 10.0 13.0 10.0 10.0 11.0 11.0 11.0 6.0 6.0 6.0 7.0 6.0 8.5 7.0 8.5 8.5 10.0 10.0 10.0 11.0 11.0 13.0 13.0 11.0 9.0 11.0 11.0 12.0 11.0 12.0 12.0 12.0 11.0 11.0 11.0 11.0 12.0 11.0 12.0 12.0 13.5 12.5 13.5 12.5 13.5 14.5 12.0 14.5 16.0 12.0 16.0 16.0 19.0 19.0 19.0 15.0 15.0 15.0 16.0 15.0 17.0 16.0 17.0 17.0 18.5 18.5 18.5 20.0 20.0 22.0 22.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 L Lead Spacing (S) T H dV/dt (V/µs) Max K0 (V2/µs) ESL ESR max Irms max (*) Ipkr Lead Length 2x 4 mm at 100 kHz at 100 kHz 85°C Apk nH mΩ Arms (°C/W) 41 41 50 59 59 71 71 84 102 30 35 42 50 61 61 74 90 90 90 108 108 135 135 135 162 162 162 198 243 243 297 351 60 75 90 110 110 135 135 165 195 195 235 280 280 340 340 410 9 9 9 9 9 9 9 9 9 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 24 24 19 16 16 14 14 20 16 19 16 14 20 16 16 14 11 11 11 13 13 11 11 11 9 9 9 7 6 6 5 4 20 16 13 11 11 9 9 7 8 8 7 6 6 5 4.7 3.9 3.5 3.3 3.9 4.2 4.4 4.6 4.8 4.0 4.4 4.1 4.5 5.0 4.1 4.7 4.5 5.1 5.7 6.0 6.0 5.5 5.5 6.1 6.3 6.5 6.9 7.2 7.1 7.9 8.8 9.2 10.2 11.0 4.8 5.4 5.9 6.7 6.5 7.7 7.4 8.5 8.0 8.3 9.1 9.9 10.2 11.2 11.7 12.8 69 79 69 69 64 69 64 64 64 60 60 60 60 56 60 56 56 51 50 51 50 51 48 45 48 44 45 44 44 40 40 40 43 43 43 41 43 38 41 38 38 36 36 36 34 34 31 31 Apk Lead Length 2x 4 mm at 100 kHz at 100 kHz 85°C (°C/W) Ipkr ESL ESR max Irms max (*) Rth Rth KEMET Internal Part Number Customer Part Number 76MF2270(1)30(2) 76MF2270(1)50(2) 76MF2330(1)30(2) 76MF2390(1)50(2) 76MF2390(1)30(2) 76MF2470(1)50(2) 76MF2470(1)30(2) 76MF2560(1)50(2) 76MF2680(1)50(2) 76MI2330(1)00(2) 76MI2390(1)30(2) 76MI2470(1)30(2) 76MI2560(1)30(2) 76MI2680(1)30(2) 76MI2680(1)50(2) 76MI2820(1)30(2) 76MI3100(1)50(2) 76MI3100(1)30(2) 76MI3100(1)70(2) 76MI3120(1)30(2) 76MI3120(1)70(2) 76MI3150(1)50(2) 76MI3150(1)30(2) 76MI3150(1)70(2) 76MI3180(1)50(2) 76MI3180(1)30(2) 76MI3180(1)70(2) 76MI3220(1)30(2) 76MI3270(1)50(2) 76MI3270(1)30(2) 76MI3330(1)50(2) 76MI3390(1)50(2) 76MN3120(1)30(2) 76MN3150(1)30(2) 76MN3180(1)30(2) 76MN3220(1)30(2) 76MN3220(1)50(2) 76MN3270(1)30(2) 76MN3270(1)50(2) 76MN3330(1)30(2) 76MN3390(1)50(2) 76MN3390(1)30(2) 76MN3470(1)30(2) 76MN3560(1)50(2) 76MN3560(1)30(2) 76MN3680(1)50(2) 76MN3680(1)30(2) 76MN3820(1)50(2) R76MF2270(1)30(2) R76MF2270(1)50(2) R76MF2330(1)30(2) R76MF2390(1)50(2) R76MF2390(1)30(2) R76MF2470(1)50(2) R76MF2470(1)30(2) R76MF2560(1)50(2) R76MF2680(1)50(2) R76MI2330(1)00(2) R76MI2390(1)30(2) R76MI2470(1)30(2) R76MI2560(1)30(2) R76MI2680(1)30(2) R76MI2680(1)50(2) R76MI2820(1)30(2) R76MI3100(1)50(2) R76MI3100(1)30(2) R76MI3100(1)70(2) R76MI3120(1)30(2) R76MI3120(1)70(2) R76MI3150(1)50(2) R76MI3150(1)30(2) R76MI3150(1)70(2) R76MI3180(1)50(2) R76MI3180(1)30(2) R76MI3180(1)70(2) R76MI3220(1)30(2) R76MI3270(1)50(2) R76MI3270(1)30(2) R76MI3330(1)50(2) R76MI3390(1)50(2) R76MN3120(1)30(2) R76MN3150(1)30(2) R76MN3180(1)30(2) R76MN3220(1)30(2) R76MN3220(1)50(2) R76MN3270(1)30(2) R76MN3270(1)50(2) R76MN3330(1)30(2) R76MN3390(1)50(2) R76MN3390(1)30(2) R76MN3470(1)30(2) R76MN3560(1)50(2) R76MN3560(1)30(2) R76MN3680(1)50(2) R76MN3680(1)30(2) R76MN3820(1)50(2) KEMET Internal Part Number Customer Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (2) H = 2.5% (only for C ≥ 1,000 pF), J = 5%, K = 10% (*) Irms value that leads to a ΔT of ≈ 20°C in the hot spot > THS = TAMB + ΔT = 85°C + 20°C = 105°C © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 12 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Table 1 – Ratings & Part Number Reference cont. VDC VAC Cap Value (µF) 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 630 630 630 630 630 630 630 630 630 630 630 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 1 0.39 0.47 0.56 0.68 0.68 0.82 0.82 1 1 1.2 1.2 1.5 1.5 1.8 1.8 2.2 2.2 2.7 1 1 1.2 1.2 1.5 1.5 1.8 1.8 2.2 2.2 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 0.00068 0.00082 0.001 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 VDC VAC Cap Value Dimensions in mm Irms max (*) Rth dV/dt (V/µs) Max K0 (V2/µs) Ipkr Lead Length 2x 4 mm at 100 kHz at 100 kHz 85°C Apk nH mΩ Arms (°C/W) 500 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 2,800 2,800 2,800 2,800 2,800 2,800 2,800 2,800 2,800 2,800 2,800 400,000 240,000 240,000 240,000 240,000 240,000 240,000 240,000 240,000 240,000 240,000 240,000 240,000 240,000 240,000 240,000 240,000 240,000 240,000 144,000 144,000 144,000 144,000 144,000 144,000 144,000 144,000 144,000 144,000 144,000 144,000 144,000 144,000 144,000 144,000 144,000 144,000 3,528,000 3,528,000 3,528,000 3,528,000 3,528,000 3,528,000 3,528,000 3,528,000 3,528,000 3,528,000 3,528,000 500 117 141 168 204 204 246 246 300 300 360 360 450 450 540 540 660 660 810 180 180 216 216 270 270 324 324 396 396 396 486 594 702 846 1,008 1,224 1,476 2 2 3 3 4 5 6 8 9 11 13 16 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 8 8 8 8 8 8 8 8 8 8 8 6 8 7 6 7 7 6 6 6 6 5 5.3 4.2 4.2 5.3 5.3 4.3 4.3 7.1 6 6 5 5 4 4 5 5.3 4.3 4.3 4.3 7.1 5.8 4.9 4.1 3.4 7.0 5.8 936 776 637 531 424 354 289 236 193 163 135 11.5 8.4 9.2 10.6 9.5 10.2 10.9 11.3 11.1 11.5 12.0 11.8 13.9 14.3 12.4 12.8 14.2 14.9 11.7 11.5 12.1 12.2 12.4 13.7 13.9 12.9 12.8 14.3 14.9 14.2 11.7 12.9 14.8 16.2 18.4 13.3 14.6 0.1 0.1 0.2 0.2 0.2 0.3 0.3 0.4 0.5 0.6 0.7 27 35 35 31 31 27 29 27 29 27 26 27 25 23 25 23 23 21 21 27 24 25 24 25 24 23 23 23 21 23 21 21 19 19 17 16 16 98 98 98 98 98 98 98 88 88 88 88 Apk Lead Length 2x 4 mm at 100 kHz at 100 kHz 85°C (°C/W) Ipkr ESL ESR max Irms max (*) Rth T H L 29.5 17.0 17.0 20.0 20.0 15.0 22.0 15.0 22.0 15.0 28.0 15.0 30.0 33.0 30.0 33.0 33.0 37.0 37.0 22.0 15.0 24.0 15.0 24.0 15.0 28.5 19.0 28.5 32.0 19.0 32.0 32.0 40.0 40.0 44.0 45.0 45.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 9.0 9.0 9.0 9.0 26.5 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 22.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 L Lead Spacing (S) H ESR max Lead Spacing (S) 14.5 9.0 9.0 11.0 11.0 24.0 13.0 24.0 13.0 24.0 14.0 24.0 16.0 18.0 16.0 18.0 18.0 22.0 22.0 11.0 24.0 13.0 24.0 13.0 24.0 16.0 24.0 16.0 19.0 24.0 19.0 19.0 20.0 20.0 24.0 30.0 30.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 4.0 4.0 4.0 4.0 T ESL dV/dt (V/µs) Max K0 (V2/µs) KEMET Internal Part Number Customer Part Number 76MN4100(1)30(2) R76MN4100(1)30(2) 76MR3390(1)30(2) R76MR3390(1)30(2) 76MR3470(1)30(2) R76MR3470(1)30(2) 76MR3560(1)30(2) R76MR3560(1)30(2) 76MR3680(1)30(2) R76MR3680(1)30(2) 76MR3680(1)L0(2) R76MR3680(1)L0(2) 76MR3820(1)30(2) R76MR3820(1)30(2) 76MR3820(1)L0(2) R76MR3820(1)L0(2) 76MR4100(1)40(2) R76MR4100(1)40(2) 76MR4100(1)L0(2) R76MR4100(1)L0(2) 76MR4120(1)40(2) R76MR4120(1)40(2) 76MR4120(1)L0(2) R76MR4120(1)L0(2) 76MR4150(1)40(2) R76MR4150(1)40(2) 76MR4150(1)30(2) R76MR4150(1)30(2) 76MR4180(1)40(2) R76MR4180(1)40(2) 76MR4180(1)30(2) R76MR4180(1)30(2) 76MR4220(1)40(2) R76MR4220(1)40(2) 76MR4220(1)30(2) R76MR4220(1)30(2) 76MR4270(1)30(2) R76MR4270(1)30(2) 76MW4100(1)30(2) R76MW4100(1)30(2) 76MW4100(1)L0(2) R76MW4100(1)L0(2) 76MW4120(1)30(2) R76MW4120(1)30(2) 76MW4120(1)L0O2) R76MW4120(1)L0O2) 76MW4150(1)30(2) R76MW4150(1)30(2) 76MW4150(1)L0(2) R76MW4150(1)L0(2) 76MW4180(1)30(2) R76MW4180(1)30(2) 76MW4180(1)L0(2) R76MW4180(1)L0(2) 76MW4220(1)30(2) R76MW4220(1)30(2) 76MW4220(1)30(2) R76MW4220(1)30(2) 76MW4220(1)L0(2) R76MW4220(1)L0(2) 76MW4270(1)30(2) R76MW4270(1)30(2) 76MW4330(1)30(2) R76MW4330(1)30(2) 76MW4390(1)30(2) R76MW4390(1)30(2) 76MW4470(1)30(2) R76MW4470(1)30(2) 76MW4560(1)30(2) R76MW4560(1)30(2) 76MW4680(1)30(2) R76MW4680(1)30(2) 76MW4820(1)30(2) R76MW4820(1)30(2) 76PD0680(1)00(2) R76PD0680(1)00(2) 76PD0820(1)00(2) R76PD0820(1)00(2) 76PD1100(1)00(2) R76PD1100(1)00(2) 76PD1120(1)00(2) R76PD1120(1)00(2) 76PD1150(1)00(2) R76PD1150(1)00(2) 76PD1180(1)00(2) R76PD1180(1)00(2) 76PD1220(1)00(2) R76PD1220(1)00(2) 76PD1270(1)40(2) R76PD1270(1)40(2) 76PD1330(1)40(2) R76PD1330(1)40(2) 76PD1390(1)40(2) R76PD1390(1)40(2) 76PD1470(1)40(2) R76PD1470(1)40(2) KEMET Internal Part Number Customer Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (2) H = 2.5% (only for C ≥ 1,000 pF), J = 5%, K = 10% (*) Irms value that leads to a ΔT of ≈ 20°C in the hot spot > THS = TAMB + ΔT = 85°C + 20°C = 105°C © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 13 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Table 1 – Ratings & Part Number Reference cont. VDC VAC Cap Value (µF) 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 250 250 250 250 250 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 0.0056 0.0068 0.0082 0.01 0.012 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01 0.01 0.012 0.015 0.015 0.018 0.018 0.022 0.027 0.012 0.015 0.018 0.022 0.027 0.033 0.033 0.039 0.047 0.047 0.047 0.056 0.056 0.068 0.068 0.068 0.082 0.082 0.082 0.1 0.1 0.12 0.12 0.047 0.056 0.068 0.082 0.1 VDC VAC Cap Value Dimensions in mm Lead Spacing (S) dV/dt (V/µs) Max K0 (V2/µs) 2,800 2,800 2,800 2,800 2,800 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 1,500 1,500 1,500 1,500 1,500 3,528,000 3,528,000 3,528,000 3,528,000 3,528,000 5,040,000 5,040,000 5,040,000 5,040,000 5,040,000 5,040,000 5,040,000 5,040,000 5,040,000 5,040,000 5,040,000 5,040,000 5,040,000 5,040,000 5,040,000 3,780,000 3,780,000 3,780,000 3,780,000 3,780,000 3,780,000 3,780,000 3,780,000 3,780,000 3,780,000 3,780,000 3,780,000 3,780,000 3,780,000 3,780,000 3,780,000 3,780,000 3,780,000 3,780,000 3,780,000 3,780,000 3,780,000 3,780,000 1,890,000 1,890,000 1,890,000 1,890,000 1,890,000 T H L 4.0 5.0 5.0 6.0 6.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 5.0 5.0 5.0 6.0 5.0 6.0 6.0 6.0 5.0 5.0 5.0 5.0 5.0 6.0 5.0 6.0 6.0 7.5 9.0 7.5 9.0 7.5 8.5 9.0 7.5 8.5 13.0 8.5 10.0 10.0 11.0 6.0 6.0 6.0 6.0 6.0 9.0 10.5 10.5 12.0 12.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 11.0 11.0 11.0 12.0 11.0 12.0 12.0 12.0 11.0 11.0 11.0 11.0 11.0 12.0 11.0 12.0 12.0 13.5 12.5 13.5 12.5 13.5 14.5 12.5 13.5 14.5 12.0 14.5 16.0 16.0 19.0 15.0 15.0 15.0 15.0 15.0 10.0 10.0 10.0 10.5 10.5 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 7.5 7.5 7.5 7.5 7.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 L Lead Spacing (S) T H dV/dt (V/µs) Max K0 (V2/µs) ESL ESR max Irms max (*) Ipkr Lead Length 2x 4 mm at 100 kHz at 100 kHz 85°C Apk nH mΩ Arms (°C/W) 16 19 23 28 34 13 16 19 22 27 33 40 40 48 60 60 72 72 88 108 36 45 54 66 81 99 99 117 141 141 141 168 168 204 204 204 246 246 246 300 300 360 360 71 84 102 123 150 8 8 8 8 8 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 16 16 16 16 16 114 94 78 64 53 193 163 135 114 94 78 64 64 53 42 42 35 35 29 24 53 42 35 29 24 19 19 16 14 14 14 20 20 16 16 16 14 14 14 11 11 13 13 14 20 16 14 11 0.9 1.1 1.3 1.6 1.9 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.1 2.3 2.6 2.7 2.9 3.0 3.3 3.6 2.5 2.8 3.1 3.4 3.8 4.3 4.1 4.7 5.1 5.4 5.5 4.5 4.5 4.9 5.1 5.0 5.4 5.6 5.7 6.1 6.4 5.8 6.1 5.8 4.8 5.3 5.8 6.4 88 78 78 69 69 79 79 79 79 79 79 79 69 69 69 64 69 64 64 64 60 60 60 60 60 56 60 56 56 51 50 51 50 51 48 50 51 48 45 48 44 44 40 43 43 43 43 43 Apk Lead Length 2x 4 mm at 100 kHz at 100 kHz 85°C (°C/W) Ipkr ESL ESR max Irms max (*) Rth Rth KEMET Internal Part Number Customer Part Number 76PD1560(1)40(2) 76PD1680(1)40(2) 76PD1820(1)40(2) 76PD2100(1)30(2) 76PD2120(1)30(2) 76PF1330(1)00(2) 76PF1390(1)00(2) 76PF1470(1)00(2) 76PF1560(1)00(2) 76PF1680(1)00(2) 76PF1820(1)00(2) 76PF2100(1)50(2) 76PF2100(1)30(2) 76PF2120(1)30(2) 76PF2150(1)50(2) 76PF2150(1)30(2) 76PF2180(1)50(2) 76PF2180(1)30(2) 76PF2220(1)30(2) 76PF2270(1)50(2) 76PI2120(1)00(2) 76PI2150(1)00(2) 76PI2180(1)00(2) 76PI2220(1)30(2) 76PI2270(1)30(2) 76PI2330(1)30(2) 76PI2330(1)50(2) 76PI2390(1)30(2) 76PI2470(1)50(2) 76PI2470(1)30(2) 76PI2470(1)70(2) 76PI2560(1)30(2) 76PI2560(1)70(2) 76PI2680(1)50(2) 76PI2680(1)30(2) 76PI2680(1)70(2) 76PI2820(1)50(2) 76PI2820(1)30(2) 76PI2820(1)70(2) 76PI3100(1)50(2) 76PI3100(1)30(2) 76PI3120(1)50(2) 76PI3120(1)30(2) 76PN2470(1)00(2) 76PN2560(1)00(2) 76PN2680(1)00(2) 76PN2820(1)30(2) 76PN3100(1)30(2) R76PD1560(1)40(2) R76PD1680(1)40(2) R76PD1820(1)40(2) R76PD2100(1)30(2) R76PD2120(1)30(2) R76PF1330(1)00(2) R76PF1390(1)00(2) R76PF1470(1)00(2) R76PF1560(1)00(2) R76PF1680(1)00(2) R76PF1820(1)00(2) R76PF2100(1)50(2) R76PF2100(1)30(2) R76PF2120(1)30(2) R76PF2150(1)50(2) R76PF2150(1)30(2) R76PF2180(1)50(2) R76PF2180(1)30(2) R76PF2220(1)30(2) R76PF2270(1)50(2) R76PI2120(1)00(2) R76PI2150(1)00(2) R76PI2180(1)00(2) R76PI2220(1)30(2) R76PI2270(1)30(2) R76PI2330(1)30(2) R76PI2330(1)50(2) R76PI2390(1)30(2) R76PI2470(1)50(2) R76PI2470(1)30(2) R76PI2470(1)70(2) R76PI2560(1)30(2) R76PI2560(1)70(2) R76PI2680(1)50(2) R76PI2680(1)30(2) R76PI2680(1)70(2) R76PI2820(1)50(2) R76PI2820(1)30(2) R76PI2820(1)70(2) R76PI3100(1)50(2) R76PI3100(1)30(2) R76PI3120(1)50(2) R76PI3120(1)30(2) R76PN2470(1)00(2) R76PN2560(1)00(2) R76PN2680(1)00(2) R76PN2820(1)30(2) R76PN3100(1)30(2) KEMET Internal Part Number Customer Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (2) H = 2.5% (only for C ≥ 1,000 pF), J = 5%, K = 10% (*) Irms value that leads to a ΔT of ≈ 20°C in the hot spot > THS = TAMB + ΔT = 85°C + 20°C = 105°C © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 14 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Table 1 – Ratings & Part Number Reference cont. VDC VAC Cap Value (µF) 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 0.12 0.12 0.15 0.15 0.18 0.22 0.22 0.27 0.27 0.33 0.39 0.39 0.47 0.56 0.15 0.18 0.22 0.27 0.33 0.39 0.39 0.47 0.47 0.56 0.56 0.68 0.68 0.82 1 1 1.2 1.5 1.8 0.33 0.39 0.47 0.56 0.68 0.68 0.82 0.82 1 1 1.2 1.2 1.5 1.5 1.8 VDC VAC Cap Value Dimensions in mm Lead Spacing (S) dV/dt (V/µs) Max K0 (V2/µs) 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 1,890,000 1,890,000 1,890,000 1,890,000 1,890,000 1,890,000 1,890,000 1,890,000 1,890,000 1,890,000 1,890,000 1,890,000 1,890,000 1,890,000 1,134,000 1,134,000 1,134,000 1,134,000 1,134,000 1,134,000 1,134,000 1,134,000 1,134,000 1,134,000 1,134,000 1,134,000 1,134,000 1,134,000 1,134,000 1,134,000 1,134,000 1,134,000 1,134,000 567,000 567,000 567,000 567,000 567,000 567,000 567,000 567,000 567,000 567,000 567,000 567,000 567,000 567,000 567,000 T H L 6.0 7.0 7.0 8.5 8.5 8.5 10.0 10.0 11.0 11.0 11.0 13.0 13.0 14.5 9.0 9.0 9.0 9.0 11.0 11.0 24.0 13.0 24.0 13.0 24.0 13.0 24.0 14.0 16.0 18.0 18.0 22.0 22.0 11.0 11.0 11.0 11.0 11.0 24.0 13.0 24.0 16.0 24.0 16.0 24.0 16.0 24.0 19.0 15.0 16.0 16.0 17.0 17.0 17.0 18.5 18.5 20.0 20.0 20.0 22.0 22.0 29.5 17.0 17.0 17.0 17.0 20.0 20.0 15.0 22.0 15.0 22.0 15.0 25.0 15.0 28.0 30.0 33.0 33.0 37.0 37.0 22.0 22.0 22.0 22.0 22.0 15.0 24.0 15.0 28.5 15.0 28.5 19.0 28.5 19.0 32.0 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 L Lead Spacing (S) T H dV/dt (V/µs) Max K0 (V2/µs) ESL ESR max Irms max (*) Ipkr Lead Length 2x 4 mm at 100 kHz at 100 kHz 85°C Apk nH mΩ Arms (°C/W) 180 180 225 225 270 330 330 405 405 495 585 585 705 840 135 162 198 243 297 351 351 423 423 504 504 612 612 738 900 900 1,080 1,350 1,620 149 176 212 252 306 306 369 369 450 450 540 540 675 675 810 16 16 16 16 16 16 16 16 16 16 16 16 16 16 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 16 16 13 11 11 9 9 7 8 8 7 6 16 13 11 9 7 8 8 7 7 6 6 7 7 6 6 5.6 5.3 4.2 5.3 7 8 7 6 7 7 6 6 6 6 5 5 4 4 5.3 4.8 4.9 5.5 5.7 6.3 6.9 7.2 7.9 8.2 9.0 8.5 8.8 9.7 11.4 6.0 6.6 7.3 8.0 9.4 8.8 9.5 10.1 10.4 11.0 11.4 10.1 10.2 11.5 12.1 12.5 12.8 15.1 13.5 10.1 9.5 10.4 11.4 10.3 10.8 11.7 11.9 12.6 12.1 12.9 12.8 14.5 14.4 13.5 43 41 41 38 38 38 36 36 34 34 34 31 31 27 35 35 35 35 31 31 27 29 27 29 27 28 27 26 25 23 23 21 21 27 27 27 27 27 24 25 24 23 24 23 23 23 23 21 Apk Lead Length 2x 4 mm at 100 kHz at 100 kHz 85°C (°C/W) Ipkr ESL ESR max Irms max (*) Rth Rth KEMET Internal Part Number Customer Part Number 76PN3120(1)50(2) 76PN3120(1)30(2) 76PN3150(1)50(2) 76PN3150(1)30(2) 76PN3180(1)30(2) 76PN3220(1)50(2) 76PN3220(1)30(2) 76PN3270(1)50(2) 76PN3270(1)30(2) 76PN3330(1)30(2) 76PN3390(1)50(2) 76PN3390(1)30(2) 76PN3470(1)50(2) 76PN3560(1)30(2) 76PR3150(1)30(2) 76PR3180(1)30(2) 76PR3220(1)30(2) 76PR3270(1)30(2) 76PR3330(1)40(2) 76PR3390(1)30(2) 76PR3390(1)L0(2) 76PR3470(1)30(2) 76PR3470(1)L0(2) 76PR3560(1)30(2) 76PR3560(1)L0(2) 76PR3680(1)40(2) 76PR3680(1)L0(2) 76PR3820(1)30(2) 76PR4100(1)40(2) 76PR4100(1)30(2) 76PR4120(1)30(2) 76PR4150(1)30(2) 76PR4180(1)30(2) 76PW3330(1)30(2) 76PW3390(1)30(2) 76PW3470(1)30(2) 76PW3560(1)30(2) 76PW3680(1)30(2) 76PW3680(1)L0(2) 76PW3820(1)30(2) 76PW3820(1)L0(2) 76PW4100(1)30(2) 76PW4100(1)L0(2) 76PW4120(1)30(2) 76PW4120(1)L0(2) 76PW4150(1)30(2) 76PW4150(1)L0(2) 76PW4180(1)30(2) R76PN3120(1)50(2) R76PN3120(1)30(2) R76PN3150(1)50(2) R76PN3150(1)30(2) R76PN3180(1)30(2) R76PN3220(1)50(2) R76PN3220(1)30(2) R76PN3270(1)50(2) R76PN3270(1)30(2) R76PN3330(1)30(2) R76PN3390(1)50(2) R76PN3390(1)30(2) R76PN3470(1)50(2) R76PN3560(1)30(2) R76PR3150(1)30(2) R76PR3180(1)30(2) R76PR3220(1)30(2) R76PR3270(1)30(2) R76PR3330(1)40(2) R76PR3390(1)30(2) R76PR3390(1)L0(2) R76PR3470(1)30(2) R76PR3470(1)L0(2) R76PR3560(1)30(2) R76PR3560(1)L0(2) R76PR3680(1)40(2) R76PR3680(1)L0(2) R76PR3820(1)30(2) R76PR4100(1)40(2) R76PR4100(1)30(2) R76PR4120(1)30(2) R76PR4150(1)30(2) R76PR4180(1)30(2) R76PW3330(1)30(2) R76PW3390(1)30(2) R76PW3470(1)30(2) R76PW3560(1)30(2) R76PW3680(1)30(2) R76PW3680(1)L0(2) R76PW3820(1)30(2) R76PW3820(1)L0(2) R76PW4100(1)30(2) R76PW4100(1)L0(2) R76PW4120(1)30(2) R76PW4120(1)L0(2) R76PW4150(1)30(2) R76PW4150(1)L0(2) R76PW4180(1)30(2) KEMET Internal Part Number Customer Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (2) H = 2.5% (only for C ≥ 1,000 pF), J = 5%, K = 10% (*) Irms value that leads to a ΔT of ≈ 20°C in the hot spot > THS = TAMB + ΔT = 85°C + 20°C = 105°C © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 15 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Table 1 – Ratings & Part Number Reference cont. VDC VAC Cap Value (µF) 630 630 630 630 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 2.2 2.7 3.3 3.9 0.00022 0.00027 0.00033 0.00039 0.00047 0.00056 0.00068 0.00082 0.001 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.00047 0.00056 0.00068 0.00082 0.001 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0039 0.0047 0.0047 0.0056 0.0056 0.0068 0.0068 0.0082 0.01 0.012 0.015 0.0082 0.0082 0.01 0.01 0.012 0.015 VDC VAC Cap Value Dimensions in mm Lead Spacing (S) dV/dt (V/µs) 450 450 450 450 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,500 6,500 6,500 6,500 6,500 6,500 6,500 6,500 6,500 6,500 6,500 6,500 6,500 6,500 6,500 6,500 6,500 6,500 6,500 6,500 6,500 6,500 6,500 3,500 3,500 3,500 3,500 3,500 3,500 T H L 20.0 20.0 24.0 30.0 3.0 3.0 3.0 3.0 3.0 3.0 4.0 4.0 4.0 4.0 5.0 5.0 5.0 6.0 6.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 5.0 4.0 5.0 4.0 6.0 4.0 6.0 5.0 5.0 5.0 6.0 4.0 5.0 4.0 5.0 5.0 5.0 40.0 40.0 44.0 45.0 8.0 8.0 8.0 8.0 8.0 8.0 9.0 9.0 9.0 9.0 10.5 10.5 10.5 12.0 12.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 11.0 9.0 11.0 9.0 12.0 9.0 12.0 11.0 11.0 11.0 12.0 10.0 11.0 10.0 11.0 11.0 11.0 41.5 41.5 41.5 41.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.5 10.5 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 37.5 37.5 37.5 37.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 L Lead Spacing (S) T H dV/dt (V/µs) Max K0 (V2/µs) ESL ESR max Irms max (*) Ipkr Lead Length 2x 4 mm at 100 kHz at 100 kHz 85°C Apk nH mΩ Arms (°C/W) 20 20 20 20 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 10 10 10 10 10 10 4.3 7.1 5.8 4.9 2,894 2,358 1,929 1,632 1,355 1,137 936 776 637 531 424 354 289 236 193 1,355 1,137 936 776 637 531 424 354 289 236 193 163 163 135 135 114 114 94 94 78 64 53 42 78 78 64 64 53 42 15.7 12.3 14.2 16.0 0.1 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.3 0.3 0.4 0.5 0.6 0.7 0.8 0.2 0.2 0.3 0.3 0.4 0.5 0.6 0.7 0.8 1.0 1.1 1.2 1.3 1.4 1.5 1.5 1.7 1.6 1.8 1.9 2.1 2.3 2.7 2.0 2.1 2.2 2.3 2.5 2.8 19 19 17 16 98 98 98 98 98 98 88 88 88 88 78 78 78 69 69 79 79 79 79 79 79 79 79 79 79 79 79 69 79 69 79 64 79 64 69 69 69 64 65 60 65 60 60 60 Apk Lead Length 2x 4 mm at 100 kHz at 100 kHz 85°C (°C/W) Ipkr ESL ESR max Irms max (*) Rth 567,000 990 567,000 1,215 567,000 1,485 567,000 1,755 12,000,000 1 12,000,000 2 12,000,000 2 12,000,000 2 12,000,000 3 12,000,000 3 12,000,000 4 12,000,000 5 12,000,000 6 12,000,000 7 12,000,000 9 12,000,000 11 12,000,000 13 12,000,000 16 12,000,000 20 13,000,000 3 13,000,000 4 13,000,000 4 13,000,000 5 13,000,000 7 13,000,000 8 13,000,000 10 13,000,000 12 13,000,000 14 13,000,000 18 13,000,000 21 13,000,000 25 13,000,000 25 13,000,000 31 13,000,000 31 13,000,000 36 13,000,000 36 13,000,000 44 13,000,000 44 13,000,000 53 13,000,000 65 13,000,000 78 13,000,000 98 7,000,000 29 7,000,000 29 7,000,000 35 7,000,000 35 7,000,000 42 7,000,000 53 Max K0 (V2/µs) Rth KEMET Internal Part Number Customer Part Number 76PW4220(1)30(2) 76PW4270(1)30(2) 76PW4330(1)30(2) 76PW4390(1)30(2) 76QD0220(1)00(2) 76QD0270(1)00(2) 76QD0330(1)00(2) 76QD0390(1)00(2) 76QD0470(1)00(2) 76QD0560(1)00(2) 76QD0680(1)40(2) 76QD0820(1)40(2) 76QD1100(1)40(2) 76QD1120(1)40(2) 76QD1150(1)40(2) 76QD1180(1)40(2) 76QD1220(1)40(2) 76QD1270(1)00(2) 76QD1330(1)00(2) 76QF0470(1)00(2) 76QF0560(1)00(2) 76QF0680(1)00(2) 76QF0820(1)00(2) 76QF1100(1)00(2) 76QF1120(1)00(2) 76QF1150(1)00(2) 76QF1180(1)00(2) 76QF1220(1)00(2) 76QF1270(1)00(2) 76QF1330(1)30(2) 76QF1390(1)50(2) 76QF1390(1)30(2) 76QF1470(1)50(2) 76QF1470(1)30(2) 76QF1560(1)50(2) 76QF1560(1)30(2) 76QF1680(1)50(2) 76QF1680(1)30(2) 76QF1820(1)50(2) 76QF2100(1)50(2) 76QF2120(1)50(2) 76QF2150(1)50(2) 76QI1820(1)40(2) 76QI1820(1)00(2) 76QI2100(1)40(2) 76QI2100(1)30(2) 76QI2120(1)30(2) 76QI2150(1)40(2) R76PW4220(1)30(2) R76PW4270(1)30(2) R76PW4330(1)30(2) R76PW4390(1)30(2) R76QD0220(1)00(2) R76QD0270(1)00(2) R76QD0330(1)00(2) R76QD0390(1)00(2) R76QD0470(1)00(2) R76QD0560(1)00(2) R76QD0680(1)40(2) R76QD0820(1)40(2) R76QD1100(1)40(2) R76QD1120(1)40(2) R76QD1150(1)40(2) R76QD1180(1)40(2) R76QD1220(1)40(2) R76QD1270(1)00(2) R76QD1330(1)00(2) R76QF0470(1)00(2) R76QF0560(1)00(2) R76QF0680(1)00(2) R76QF0820(1)00(2) R76QF1100(1)00(2) R76QF1120(1)00(2) R76QF1150(1)00(2) R76QF1180(1)00(2) R76QF1220(1)00(2) R76QF1270(1)00(2) R76QF1330(1)30(2) R76QF1390(1)50(2) R76QF1390(1)30(2) R76QF1470(1)50(2) R76QF1470(1)30(2) R76QF1560(1)50(2) R76QF1560(1)30(2) R76QF1680(1)50(2) R76QF1680(1)30(2) R76QF1820(1)50(2) R76QF2100(1)50(2) R76QF2120(1)50(2) R76QF2150(1)50(2) R76QI1820(1)40(2) R76QI1820(1)00(2) R76QI2100(1)40(2) R76QI2100(1)30(2) R76QI2120(1)30(2) R76QI2150(1)40(2) KEMET Internal Part Number Customer Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (2) H = 2.5% (only for C ≥ 1,000 pF), J = 5%, K = 10% (*) Irms value that leads to a ΔT of ≈ 20°C in the hot spot > THS = TAMB + ΔT = 85°C + 20°C = 105°C © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 16 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Table 1 – Ratings & Part Number Reference cont. VDC VAC Cap Value (µF) 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 0.018 0.022 0.022 0.027 0.027 0.027 0.033 0.033 0.033 0.039 0.039 0.047 0.047 0.056 0.068 0.082 0.1 0.12 0.027 0.033 0.039 0.047 0.047 0.056 0.056 0.068 0.068 0.082 0.082 0.1 0.1 0.12 0.12 0.15 0.15 0.18 0.22 0.27 0.33 0.39 0.1 0.12 0.15 0.18 0.18 0.22 0.22 0.27 VDC VAC Cap Value Dimensions in mm Lead Spacing (S) dV/dt (V/µs) Max K0 (V2/µs) 3,500 3,500 3,500 3,500 3,500 3,500 3,500 3,500 3,500 3,500 3,500 3,500 3,500 3,500 3,500 3,500 3,500 3,500 2,100 2,100 2,100 2,100 2,100 2,100 2,100 2,100 2,100 2,100 2,100 2,100 2,100 2,100 2,100 2,100 2,100 2,100 2,100 2,100 2,100 2,100 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 7,000,000 7,000,000 7,000,000 7,000,000 7,000,000 7,000,000 7,000,000 7,000,000 7,000,000 7,000,000 7,000,000 7,000,000 7,000,000 7,000,000 7,000,000 7,000,000 7,000,000 7,000,000 4,200,000 4,200,000 4,200,000 4,200,000 4,200,000 4,200,000 4,200,000 4,200,000 4,200,000 4,200,000 4,200,000 4,200,000 4,200,000 4,200,000 4,200,000 4,200,000 4,200,000 4,200,000 4,200,000 4,200,000 4,200,000 4,200,000 2,000,000 2,000,000 2,000,000 2,000,000 2,000,000 2,000,000 2,000,000 2,000,000 T H L 5.0 6.0 9.0 6.0 7.5 9.0 6.0 7.5 13.0 7.5 8.5 7.5 8.5 8.5 8.5 10.0 11.0 11.0 6.0 6.0 6.0 6.0 7.0 6.0 7.0 7.0 8.5 7.0 10.0 8.5 10.0 8.5 11.0 10.0 13.0 11.0 11.0 13.0 13.0 14.5 9.0 9.0 11.0 13.0 24.0 13.0 24.0 13.0 11.0 12.0 12.5 12.0 13.5 12.5 12.0 13.5 12.0 13.5 14.5 13.5 14.5 14.5 14.5 16.0 19.0 19.0 15.0 15.0 15.0 15.0 16.0 15.0 16.0 16.0 17.0 16.0 18.5 17.0 18.5 17.0 20.0 18.5 22.0 20.0 20.0 22.0 22.0 29.5 17.0 17.0 20.0 22.0 15.0 22.0 15.0 25.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 L Lead Spacing (S) T H dV/dt (V/µs) Max K0 (V2/µs) ESL ESR max Irms max (*) Ipkr Lead Length 2x 4 mm at 100 kHz at 100 kHz 85°C Apk nH mΩ Arms (°C/W) 63 77 77 95 95 95 116 116 116 137 137 165 165 196 238 287 350 420 57 69 82 99 99 118 118 143 143 172 172 210 210 252 252 315 315 378 462 567 693 819 100 120 150 180 180 220 220 270 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 18 18 18 18 18 18 18 18 35 29 29 24 24 24 19 19 19 16 16 14 14 20 16 14 11 13 24 19 16 14 14 20 20 16 16 14 14 11 11 20 20 16 16 13 11 9 7 8 11 20 16 13 13 11 11 9 3.1 3.5 3.7 3.9 4.1 4.1 4.3 4.5 4.8 4.9 5.1 5.4 5.6 4.6 5.1 5.8 6.7 6.1 4.4 4.9 5.3 5.8 6.0 4.8 4.9 5.5 5.6 6.0 6.4 6.8 7.1 5.1 5.4 5.9 6.3 6.7 7.4 8.5 9.4 9.5 7.2 5.4 6.3 7.2 7.5 8.0 8.2 9.0 60 56 50 56 51 50 56 51 45 51 48 51 48 48 48 44 40 40 43 43 43 43 41 43 41 41 38 41 36 38 36 38 34 36 31 34 34 31 31 27 35 35 31 29 27 29 27 28 Apk Lead Length 2x 4 mm at 100 kHz at 100 kHz 85°C (°C/W) Ipkr ESL ESR max Irms max (*) Rth Rth KEMET Internal Part Number Customer Part Number 76QI2180(1)40(2) 76QI2220(1)40(2) 76QI2220(1)70(2) 76QI2270(1)50(2) 76QI2270(1)40(2) 76QI2270(1)70(2) 76QI2330(1)50(2) 76QI2330(1)40(2) 76QI2330(1)70(2) 76QI2390(1)50(2) 76QI2390(1)40(2) 76QI2470(1)50(2) 76QI2470(1)40(2) 76QI2560(1)50(2) 76QI2680(1)50(2) 76QI2820(1)50(2) 76QI3100(1)50(2) 76QI3120(1)50(2) 76QN2270(1)00(2) 76QN2330(1)30(2) 76QN2390(1)30(2) 76QN2470(1)50(2) 76QN2470(1)30(2) 76QN2560(1)50(2) 76QN2560(1)30(2) 76QN2680(1)50(2) 76QN2680(1)30(2) 76QN2820(1)50(2) 76QN2820(1)30(2) 76QN3100(1)50(2) 76QN3100(1)30(2) 76QN3120(1)50(2) 76QN3120(1)30(2) 76QN3150(1)50(2) 76QN3150(1)30(2) 76QN3180(1)50(2) 76QN3220(1)50(2) 76QN3270(1)50(2) 76QN3330(1)50(2) 76QN3390(1)50(2) 76QR3100(1)40(2) 76QR3120(1)40(2) 76QR3150(1)30(2) 76QR3180(1)30(2) 76QR3180(1)L0(2) 76QR3220(1)30(2) 76QR3220(1)L0(2) 76QR3270(1)40(2) R76QI2180(1)40(2) R76QI2220(1)40(2) R76QI2220(1)70(2) R76QI2270(1)50(2) R76QI2270(1)40(2) R76QI2270(1)70(2) R76QI2330(1)50(2) R76QI2330(1)40(2) R76QI2330(1)70(2) R76QI2390(1)50(2) R76QI2390(1)40(2) R76QI2470(1)50(2) R76QI2470(1)40(2) R76QI2560(1)50(2) R76QI2680(1)50(2) R76QI2820(1)50(2) R76QI3100(1)50(2) R76QI3120(1)50(2) R76QN2270(1)00(2) R76QN2330(1)30(2) R76QN2390(1)30(2) R76QN2470(1)50(2) R76QN2470(1)30(2) R76QN2560(1)50(2) R76QN2560(1)30(2) R76QN2680(1)50(2) R76QN2680(1)30(2) R76QN2820(1)50(2) R76QN2820(1)30(2) R76QN3100(1)50(2) R76QN3100(1)30(2) R76QN3120(1)50(2) R76QN3120(1)30(2) R76QN3150(1)50(2) R76QN3150(1)30(2) R76QN3180(1)50(2) R76QN3220(1)50(2) R76QN3270(1)50(2) R76QN3330(1)50(2) R76QN3390(1)50(2) R76QR3100(1)40(2) R76QR3120(1)40(2) R76QR3150(1)30(2) R76QR3180(1)30(2) R76QR3180(1)L0(2) R76QR3220(1)30(2) R76QR3220(1)L0(2) R76QR3270(1)40(2) KEMET Internal Part Number Customer Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (2) H = 2.5% (only for C ≥ 1,000 pF), J = 5%, K = 10% (*) Irms value that leads to a ΔT of ≈ 20°C in the hot spot > THS = TAMB + ΔT = 85°C + 20°C = 105°C © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 17 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Table 1 – Ratings & Part Number Reference cont. VDC VAC Cap Value (µF) 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 0.27 0.33 0.39 0.47 0.56 0.68 0.18 0.22 0.27 0.27 0.33 0.33 0.39 0.39 0.47 0.47 0.56 0.56 0.68 0.82 1 1.2 1.5 1.8 2.2 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0033 0.0033 0.0039 0.0039 0.0047 0.0047 0.0056 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.018 0.022 VDC VAC Cap Value Dimensions in mm Lead Spacing (S) dV/dt (V/µs) 1,000 1,000 1,000 1,000 1,000 1,000 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 8000 8000 8000 8000 8000 8000 8000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 T H L 24.0 14.0 18.0 18.0 22.0 22.0 11.0 11.0 13.0 24.0 13.0 24.0 16.0 24.0 16.0 24.0 16.0 24.0 19.0 20.0 20.0 24.0 24.0 30.0 30.0 4.0 4.0 5.0 5.0 5.0 6.0 6.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 5.0 5.0 5.0 6.0 6.0 7.5 9.0 7.5 15.0 28.0 33.0 33.0 37.0 37.0 22.0 22.0 24.0 15.0 24.0 15.0 28.5 15.0 28.5 19.0 28.5 19.0 32.0 40.0 40.0 44.0 44.0 45.0 45.0 9.0 9.0 11.0 11.0 11.0 12.0 12.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 11.0 11.0 11.0 12.0 12.0 13.5 12.5 13.5 32.0 32.0 32.0 32.0 32.0 32.0 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 13.0 13.0 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 L Lead Spacing (S) T H dV/dt (V/µs) Max K0 (V2/µs) ESL ESR max Irms max (*) Ipkr Lead Length 2x 4 mm at 100 kHz at 100 kHz 85°C Apk nH mΩ Arms (°C/W) 18 18 18 18 18 18 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 9 9 9 9 9 9 9 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 9 7 8 7 6 7 13 11 9 9 7 7 8 8 7 7 6 6 7 6 5.6 5.3 4.2 5.3 4.3 289.4 235.8 192.9 163.2 135.5 113.7 93.6 193 193 163 163 135 135 114 114 94 78 64 53 42 35 35 29 9.1 10.3 10.3 11.3 13.0 11.7 7.5 8.2 9.5 9.6 10.5 10.6 10.4 10.0 11.4 11.4 12.5 12.4 11.7 13.5 13.8 14.8 16.5 15.3 17.0 0.9 1.0 1.2 1.3 1.5 1.7 1.8 1.3 1.3 1.4 1.4 1.5 1.6 1.6 1.7 1.9 2.1 2.3 2.6 2.9 3.3 3.4 3.7 27 26 23 23 21 21 27 27 25 24 25 24 23 24 23 23 23 23 21 19 19 17 17 16 16 79 79 69 69 69 64 64 65 60 65 60 65 60 65 60 60 60 60 56 56 51 50 51 Apk Lead Length 2x 4 mm at 100 kHz at 100 kHz 85°C (°C/W) Ipkr ESL ESR max Irms max (*) Rth 2,000,000 270 2,000,000 330 2,000,000 390 2,000,000 470 2,000,000 560 2,000,000 680 1,000,000 90 1,000,000 110 1,000,000 135 1,000,000 135 1,000,000 165 1,000,000 165 1,000,000 195 1,000,000 195 1,000,000 235 1,000,000 235 1,000,000 280 1,000,000 280 1,000,000 340 1,000,000 410 1,000,000 500 1,000,000 600 1,000,000 750 1,000,000 900 1,000,000 1,100 25,600,000 18 25,600,000 22 25,600,000 26 25,600,000 31 25,600,000 38 25,600,000 45 25,600,000 54 19,200,000 20 19,200,000 20 19,200,000 23 19,200,000 23 19,200,000 28 19,200,000 28 19,200,000 34 19,200,000 34 19,200,000 41 19,200,000 49 19,200,000 60 19,200,000 72 19,200,000 90 19,200,000 108 19,200,000 108 19,200,000 132 Max K0 (V2/µs) Rth KEMET Internal Part Number Customer Part Number 76QR3270(1)L0(2) 76QR3330(1)30(2) 76QR3390(1)30(2) 76QR3470(1)30(2) 76QR3560(1)30(2) 76QR3680(1)30(2) 76QW3180(1)30(2) 76QW3220(1)30(2) 76QW3270(1)30(2) 76QW3270(1)L0(2) 76QW3330(1)30(2) 76QW3330(1)L0(2) 76QW3390(1)30(2) 76QW3390(1)L0(2) 76QW3470(1)30(2) 76QW3470(1)L0(2) 76QW3560(1)30(2) 76QW3560(1)L0(2) 76QW3680(1)30(2) 76QW3820(1)30(2) 76QW4100(1)30(2) 76QW4120(1)30(2) 76QW4150(1)30(2) 76QW4180(1)30(2) 76QW4220(1)30(2) 76TF1220(1)50(2) 76TF1270(1)50(2) 76TF1330(1)50(2) 76TF1390(1)50(2) 76TF1470(1)50(2) 76TF1560(1)50(2) 76TF1680(1)50(2) 76TI1330(1)40(2) 76TI1330(1)30(2) 76TI1390(1)40(2) 76TI1390(1)30(2) 76TI1470(1)40(2) 76TI1470(1)30(2) 76TI1560(1)40(2) 76TI1560(1)30(2) 76TI1680(1)30(2) 76TI1820(1)40(2) 76TI2100(1)40(2) 76TI2120(1)40(2) 76TI2150(1)40(2) 76TI2180(1)40(2) 76TI2180(1)70(2) 76TI2220(1)40(2) R76QR3270(1)L0(2) R76QR3330(1)30(2) R76QR3390(1)30(2) R76QR3470(1)30(2) R76QR3560(1)30(2) R76QR3680(1)30(2) R76QW3180(1)30(2) R76QW3220(1)30(2) R76QW3270(1)30(2) R76QW3270(1)L0(2) R76QW3330(1)30(2) R76QW3330(1)L0(2) R76QW3390(1)30(2) R76QW3390(1)L0(2) R76QW3470(1)30(2) R76QW3470(1)L0(2) R76QW3560(1)30(2) R76QW3560(1)L0(2) R76QW3680(1)30(2) R76QW3820(1)30(2) R76QW4100(1)30(2) R76QW4120(1)30(2) R76QW4150(1)30(2) R76QW4180(1)30(2) R76QW4220(1)30(2) R76TF1220(1)50(2) R76TF1270(1)50(2) R76TF1330(1)50(2) R76TF1390(1)50(2) R76TF1470(1)50(2) R76TF1560(1)50(2) R76TF1680(1)50(2) R76TI1330(1)40(2) R76TI1330(1)30(2) R76TI1390(1)40(2) R76TI1390(1)30(2) R76TI1470(1)40(2) R76TI1470(1)30(2) R76TI1560(1)40(2) R76TI1560(1)30(2) R76TI1680(1)30(2) R76TI1820(1)40(2) R76TI2100(1)40(2) R76TI2120(1)40(2) R76TI2150(1)40(2) R76TI2180(1)40(2) R76TI2180(1)70(2) R76TI2220(1)40(2) KEMET Internal Part Number Customer Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (2) H = 2.5% (only for C ≥ 1,000 pF), J = 5%, K = 10% (*) Irms value that leads to a ΔT of ≈ 20°C in the hot spot > THS = TAMB + ΔT = 85°C + 20°C = 105°C © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 18 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Table 1 – Ratings & Part Number Reference cont. VDC VAC Cap Value (µF) 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 0.022 0.027 0.033 0.039 0.047 0.056 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.068 0.082 0.1 0.12 0.15 0.18 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.12 0.12 0.15 0.15 0.15 0.18 0.18 0.18 0.22 0.22 0.27 0.33 0.39 0.47 0.082 0.1 0.12 0.15 0.18 0.18 VDC VAC Cap Value Dimensions in mm Lead Spacing (S) dV/dt (V/µs) Max K0 (V2/µs) 6,000 6,000 6,000 6,000 6,000 6,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 1,200 1,200 1,200 1,200 1,200 1,200 19,200,000 19,200,000 19,200,000 19,200,000 19,200,000 19,200,000 9,600,000 9,600,000 9,600,000 9,600,000 9,600,000 9,600,000 9,600,000 9,600,000 9,600,000 9,600,000 9,600,000 9,600,000 9,600,000 9,600,000 9,600,000 6,400,000 6,400,000 6,400,000 6,400,000 6,400,000 6,400,000 6,400,000 6,400,000 6,400,000 6,400,000 6,400,000 6,400,000 6,400,000 6,400,000 6,400,000 6,400,000 6,400,000 6,400,000 6,400,000 6,400,000 6,400,000 3,840,000 3,840,000 3,840,000 3,840,000 3,840,000 3,840,000 T H L 13.0 8.5 8.5 10.0 11.0 11.0 6.0 6.0 6.0 6.0 6.0 7.0 7.0 8.5 10.0 8.5 10.0 11.0 13.0 13.0 14.5 9.0 9.0 9.0 9.0 11.0 11.0 11.0 13.0 24.0 13.0 13.0 24.0 13.0 14.0 24.0 14.0 18.0 18.0 18.0 22.0 22.0 11.0 11.0 11.0 11.0 13.0 24.0 12.0 14.5 14.5 16.0 19.0 19.0 15.0 15.0 15.0 15.0 15.0 16.0 16.0 17.0 18.5 17.0 18.5 20.0 22.0 22.0 29.5 17.0 17.0 17.0 17.0 20.0 20.0 20.0 22.0 15.0 22.0 25.0 15.0 25.0 28.0 15.0 28.0 33.0 33.0 33.0 37.0 37.0 22.0 22.0 22.0 22.0 24.0 15.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 41.5 41.5 41.5 41.5 41.5 41.5 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 L Lead Spacing (S) T H dV/dt (V/µs) Max K0 (V2/µs) ESL ESR max Irms max (*) Ipkr Lead Length 2x 4 mm at 100 kHz at 100 kHz 85°C Apk nH mΩ Arms (°C/W) 132 162 198 234 282 336 45 54 66 81 99 117 141 168 204 204 246 300 360 450 540 78 94 112 136 164 200 240 240 240 300 300 300 360 360 360 440 440 540 660 780 940 98 120 144 180 216 216 10 10 10 10 10 10 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 20 20 20 20 20 20 29 24 19 16.3 13.5 19.9 42 35 29 24 19 16 14 20 16 16.4 14 11 20 16 13.3 20 17 20 16 14 11 20 20 20 16 16 16 13 13 13 11 11 9 7 8 7 14 11 20 16 13 13 3.9 4.2 4.7 5.3 6.1 5.0 3.3 3.6 4.0 4.4 4.9 5.5 6.0 5.1 5.8 5.6 6.4 7.3 5.7 6.3 7.4 5.3 5.8 5.4 5.9 6.8 7.6 5.7 5.9 6.1 6.6 6.7 6.8 7.4 7.6 7.5 8.4 9.0 9.9 11.0 10.9 11.9 7.4 8.1 6.1 6.8 7.7 7.9 45 48 48 44 40 40 43 43 43 43 43 41 41 38 36 38 36 34 31 31 27 35 35 35 35 31 31 31 29 27 29 28 27 28 26 27 26 23 23 23 21 21 27 27 27 27 25 24 Apk Lead Length 2x 4 mm at 100 kHz at 100 kHz 85°C (°C/W) Ipkr ESL ESR max Irms max (*) Rth Rth KEMET Internal Part Number Customer Part Number 76TI2220(1)70(2) 76TI2270(1)40(2) 76TI2330(1)40(2) 76TI2390(1)50(2) 76TI2470(1)50(2) 76TI2560(1)50(2) 76TN2150(1)30(2) 76TN2180(1)30(2) 76TN2220(1)30(2) 76TN2270(1)30(2) 76TN2330(1)40(2) 76TN2390(1)40(2) 76TN2470(1)40(2) 76TN2560(1)40(2) 76TN2680(1)40(2) 76TN2680(1)50(2) 76TN2820(1)40(2) 76TN3100(1)40(2) 76TN3120(1)40(2) 76TN3150(1)50(2) 76TN3180(1)50(2) 76TR2390(1)30(2) 76TR2470(1)30(2) 76TR2560(1)30(2) 76TR2680(1)30(2) 76TR2820(1)30(2) 76TR3100(1)30(2) 76TR3120(1)40(2) 76TR3120(1)30(2) 76TR3120(1)L0(2) 76TR3150(1)50(2) 76TR3150(1)40(2) 76TR3150(1)L0(2) 76TR3180(1)50(2) 76TR3180(1)40(2) 76TR3180(1)L0(2) 76TR3220(1)40(2) 76TR3220(1)30(2) 76TR3270(1)30(2) 76TR3330(1)30(2) 76TR3390(1)30(2) 76TR3470(1)30(2) 76TW2820(1)30(2) 76TW3100(1)30(2) 76TW3120(1)30(2) 76TW3150(1)30(2) 76TW3180(1)30(2) 76TW3180(1)L0(2) R76TI2220(1)70(2) R76TI2270(1)40(2) R76TI2330(1)40(2) R76TI2390(1)50(2) R76TI2470(1)50(2) R76TI2560(1)50(2) R76TN2150(1)30(2) R76TN2180(1)30(2) R76TN2220(1)30(2) R76TN2270(1)30(2) R76TN2330(1)40(2) R76TN2390(1)40(2) R76TN2470(1)40(2) R76TN2560(1)40(2) R76TN2680(1)40(2) R76TN2680(1)50(2) R76TN2820(1)40(2) R76TN3100(1)40(2) R76TN3120(1)40(2) R76TN3150(1)50(2) R76TN3180(1)50(2) R76TR2390(1)30(2) R76TR2470(1)30(2) R76TR2560(1)30(2) R76TR2680(1)30(2) R76TR2820(1)30(2) R76TR3100(1)30(2) R76TR3120(1)40(2) R76TR3120(1)30(2) R76TR3120(1)L0(2) R76TR3150(1)50(2) R76TR3150(1)40(2) R76TR3150(1)L0(2) R76TR3180(1)50(2) R76TR3180(1)40(2) R76TR3180(1)L0(2) R76TR3220(1)40(2) R76TR3220(1)30(2) R76TR3270(1)30(2) R76TR3330(1)30(2) R76TR3390(1)30(2) R76TR3470(1)30(2) R76TW2820(1)30(2) R76TW3100(1)30(2) R76TW3120(1)30(2) R76TW3150(1)30(2) R76TW3180(1)30(2) R76TW3180(1)L0(2) KEMET Internal Part Number Customer Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (2) H = 2.5% (only for C ≥ 1,000 pF), J = 5%, K = 10% (*) Irms value that leads to a ΔT of ≈ 20°C in the hot spot > THS = TAMB + ΔT = 85°C + 20°C = 105°C © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 19 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Table 1 – Ratings & Part Number Reference cont. VDC VAC Cap Value (µF) 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 1,600 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 650 650 650 650 650 650 650 650 650 650 650 650 650 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 0.22 0.22 0.27 0.27 0.33 0.33 0.39 0.47 0.56 0.68 0.82 1 1.2 0.0001 0.00012 0.00015 0.00018 0.00022 0.00022 0.00027 0.00027 0.00033 0.00033 0.00039 0.00039 0.00047 0.00047 0.00056 0.00056 0.00068 0.00068 0.00082 0.00082 0.001 0.001 0.0012 0.0012 0.0015 0.0015 0.0018 0.0018 0.0022 0.0022 0.0027 0.0027 0.0033 0.0039 0.0047 VDC VAC Cap Value Dimensions in mm Lead Spacing (S) dV/dt (V/µs) 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 11,000 11,000 11,000 11,000 11,000 11,000 11,000 11,000 11,000 11,000 11,000 11,000 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 T H L 13.0 24.0 13.0 24.0 16.0 24.0 16.0 19.0 20.0 20.0 24.0 24.0 30.0 4.0 4.0 4.0 4.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 4.0 5.0 5.0 5.0 5.0 24.0 15.0 24.0 19.0 28.5 19.0 28.5 32.0 40.0 40.0 44.0 44.0 45.0 10.0 10.0 10.0 10.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 10.0 11.0 11.0 11.0 11.0 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 L Lead Spacing (S) T H dV/dt (V/µs) Max K0 (V2/µs) ESL ESR max Irms max (*) Ipkr Lead Length 2x 4 mm at 100 kHz at 100 kHz 85°C Apk nH mΩ Arms (°C/W) 20 20 20 20 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 11 11 9 9 7 7 8 7 6 7 6 5.6 5.3 6,366 5,305 4,244 3,537 2,894 2,894 2,358 2,358 1,929 1,929 1,632 1,632 1,355 1,355 1,137 1,137 936 936 776 776 637 637 531 531 424 424 354 354 289 289 236 236 193 163 135 8.5 8.7 9.5 9.9 11.1 11.0 10.4 12.0 13.7 12.3 14.1 14.4 15.3 0.0 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.4 0.4 0.4 0.4 0.5 0.5 0.7 0.7 0.8 0.8 1.0 1.0 1.1 1.2 1.3 1.4 1.6 25 24 25 23 23 23 23 21 19 19 17 17 16 65 65 65 65 65 60 65 60 65 60 65 60 65 60 65 60 65 60 65 60 65 60 65 60 65 60 65 60 65 60 65 60 60 60 60 Apk Lead Length 2x 4 mm at 100 kHz at 100 kHz 85°C (°C/W) Ipkr ESL ESR max Irms max (*) Rth 3,840,000 264 3,840,000 264 3,840,000 324 3,840,000 324 3,840,000 396 3,840,000 396 3,840,000 468 3,840,000 564 3,840,000 672 3,840,000 816 3,840,000 984 3,840,000 1,200 3,840,000 1,440 44,000,000 1 44,000,000 1 44,000,000 2 44,000,000 2 44,000,000 2 44,000,000 2 44,000,000 3 44,000,000 3 44,000,000 4 44,000,000 4 44,000,000 4 44,000,000 4 38,000,000 4 38,000,000 4 38,000,000 5 38,000,000 5 38,000,000 6 38,000,000 6 38,000,000 8 38,000,000 8 38,000,000 10 38,000,000 10 38,000,000 11 38,000,000 11 38,000,000 14 38,000,000 14 38,000,000 17 38,000,000 17 38,000,000 21 38,000,000 21 38,000,000 26 38,000,000 26 38,000,000 31 38,000,000 37 38,000,000 45 Max K0 (V2/µs) Rth KEMET Internal Part Number Customer Part Number 76TW3220(1)30(2) 76TW3220(1)L0(2) 76TW3270(1)30(2) 76TW3270(1)L0(2) 76TW3330(1)30(2) 76TW3330(1)L0(2) 76TW3390(1)30(2) 76TW3470(1)30(2) 76TW3560(1)30(2) 76TW3680(1)30(2) 76TW3820(1)30(2) 76TW4100(1)30(2) 76TW4120(1)30(2) 76UI0100(1)40(2) 76UI0120(1)40(2) 76UI0150(1)40(2) 76UI0180(1)40(2) 76UI0220(1)40(2) 76UI0220(1)00(2) 76UI0270(1)40(2) 76UI0270(1)00(2) 76UI0330(1)40(2) 76UI0330(1)00(2) 76UI0390(1)40(2) 76UI0390(1)00(2) 76UI0470(1)40(2) 76UI0470(1)00(2) 76UI0560(1)40(2) 76UI0560(1)00(2) 76UI0680(1)40(2) 76UI0680(1)00(2) 76UI0820(1)40(2) 76UI0820(1)00(2) 76UI1100(1)40(2) 76UI1100(1)30(2) 76UI1120(1)40(2) 76UI1120(1)30(2) 76UI1150(1)40(2) 76UI1150(1)30(2) 76UI1180(1)40(2) 76UI1180(1)30(2) 76UI1220(1)40(2) 76UI1220(1)30(2) 76UI1270(1)40(2) 76UI1270(1)30(2) 76UI1330(1)40(2) 76UI1390(1)40(2) 76UI1470(1)40(2) R76TW3220(1)30(2) R76TW3220(1)L0(2) R76TW3270(1)30(2) R76TW3270(1)L0(2) R76TW3330(1)30(2) R76TW3330(1)L0(2) R76TW3390(1)30(2) R76TW3470(1)30(2) R76TW3560(1)30(2) R76TW3680(1)30(2) R76TW3820(1)30(2) R76TW4100(1)30(2) R76TW4120(1)30(2) R76UI0100(1)40(2) R76UI0120(1)40(2) R76UI0150(1)40(2) R76UI0180(1)40(2) R76UI0220(1)40(2) R76UI0220(1)00(2) R76UI0270(1)40(2) R76UI0270(1)00(2) R76UI0330(1)40(2) R76UI0330(1)00(2) R76UI0390(1)40(2) R76UI0390(1)00(2) R76UI0470(1)40(2) R76UI0470(1)00(2) R76UI0560(1)40(2) R76UI0560(1)00(2) R76UI0680(1)40(2) R76UI0680(1)00(2) R76UI0820(1)40(2) R76UI0820(1)00(2) R76UI1100(1)40(2) R76UI1100(1)30(2) R76UI1120(1)40(2) R76UI1120(1)30(2) R76UI1150(1)40(2) R76UI1150(1)30(2) R76UI1180(1)40(2) R76UI1180(1)30(2) R76UI1220(1)40(2) R76UI1220(1)30(2) R76UI1270(1)40(2) R76UI1270(1)30(2) R76UI1330(1)40(2) R76UI1390(1)40(2) R76UI1470(1)40(2) KEMET Internal Part Number Customer Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (2) H = 2.5% (only for C ≥ 1,000 pF), J = 5%, K = 10% (*) Irms value that leads to a ΔT of ≈ 20°C in the hot spot > THS = TAMB + ΔT = 85°C + 20°C = 105°C © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 20 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Table 1 – Ratings & Part Number Reference cont. VDC VAC Cap Value (µF) 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 0.0056 0.0068 0.0082 0.01 0.01 0.012 0.012 0.015 0.018 0.022 0.027 0.001 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.039 0.047 0.056 0.068 0.082 0.1 0.022 0.027 0.033 0.039 0.047 0.047 0.056 0.056 0.068 0.068 0.082 VDC VAC Cap Value Dimensions in mm Lead Spacing (S) dV/dt (V/µs) Max K0 (V2/µs) 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 9,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 38,000,000 38,000,000 38,000,000 38,000,000 38,000,000 38,000,000 38,000,000 38,000,000 38,000,000 38,000,000 38,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 10,000,000 10,000,000 10,000,000 10,000,000 10,000,000 10,000,000 10,000,000 10,000,000 10,000,000 10,000,000 10,000,000 T H L 6.0 6.0 6.0 7.5 13.0 7.5 8.5 8.5 10.0 10.0 11.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 7.0 7.0 8.5 8.5 10.0 10.0 11.0 11.0 13.0 14.5 9.0 9.0 9.0 11.0 11.0 24.0 13.0 24.0 13.0 24.0 13.0 12.0 12.0 12.0 13.5 12.0 13.5 14.5 14.5 16.0 16.0 19.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 16.0 16.0 17.0 17.0 18.5 18.5 20.0 20.0 22.0 29.5 17.0 17.0 17.0 20.0 20.0 15.0 22.0 15.0 22.0 15.0 25.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 L Lead Spacing (S) T H dV/dt (V/µs) Max K0 (V2/µs) ESL ESR max Irms max (*) Ipkr Lead Length 2x 4 mm at 100 kHz at 100 kHz 85°C Apk nH mΩ Arms (°C/W) 53 65 78 95 95 114 114 143 171 209 257 5 5 7 8 10 12 15 18 21 25 31 37 45 54 68 81 99 122 149 176 176 212 252 306 369 450 55 68 83 98 118 118 140 140 170 170 205 10 10 10 10 10 10 10 10 10 10 10 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 18 18 18 18 18 18 18 18 18 18 18 114 94 78 64 64 53.1 53 42 35.4 28.9 23.6 637 531 424 354 289 236 193 163 135 114 94 78 64 53 42 35 29 24 19 16.3 16 14 20 16.4 13.6 11.1 36 29 24 20 17 17 20 20 16 16 14 1.8 2.0 2.1 2.5 2.6 2.7 2.8 3.1 3.6 4.0 4.6 0.4 0.5 0.7 0.8 1.0 1.2 1.5 1.7 1.8 2.0 2.2 2.4 2.7 2.9 3.3 3.6 4.1 4.5 5.2 5.6 5.9 6.4 5.4 6.0 6.8 8.1 4.0 4.4 4.9 5.6 6.1 6.6 5.9 6.1 6.5 6.7 7.3 56 56 56 51 45 51 48 48 44 44 40 43 43 43 43 43 43 43 43 43 43 43 43 43 43 43 43 41 41 38 38 36 36 34 34 31 27 35 35 35 31 31 27 29 27 29 27 28 Apk Lead Length 2x 4 mm at 100 kHz at 100 kHz 85°C (°C/W) Ipkr ESL ESR max Irms max (*) Rth Rth KEMET Internal Part Number Customer Part Number 76UI1560(1)40(2) 76UI1680(1)40(2) 76UI1820(1)40(2) 76UI2100(1)40(2) 76UI2100(1)70(2) 76UI2120(1)50(2) 76UI2120(1)40(2) 76UI2150(1)40(2) 76UI2180(1)50(2) 76UI2220(1)50(2) 76UI2270(1)50(2) 76UN1100(1)00(2) 76UN1120(1)00(2) 76UN1150(1)00(2) 76UN1180(1)00(2) 76UN1220(1)00(2) 76UN1270(1)00(2) 76UN1330(1)00(2) 76UN1390(1)00(2) 76UN1470(1)00(2) 76UN1560(1)00(2) 76UN1680(1)00(2) 76UN1820(1)30(2) 76UN2100(1)30(2) 76UN2120(1)30(2) 76UN2150(1)40(2) 76UN2180(1)40(2) 76UN2220(1)40(2) 76UN2270(1)40(2) 76UN2330(1)40(2) 76UN2390(1)50(2) 76UN2390(1)40(2) 76UN2470(1)40(2) 76UN2560(1)40(2) 76UN2680(1)50(2) 76UN2820(1)50(2) 76UN3100(1)50(2) 76UR2220(1)30(2) 76UR2270(1)30(2) 76UR2330(1)30(2) 76UR2390(1)20(2) 76UR2470(1)30(2) 76UR2470(1)L0(2) 76UR2560(1)30(2) 76UR2560(1)L0(2) 76UR2680(1)30(2) 76UR2680(1)L0(2) 76UR2820(1)40(2) R76UI1560(1)40(2) R76UI1680(1)40(2) R76UI1820(1)40(2) R76UI2100(1)40(2) R76UI2100(1)70(2) R76UI2120(1)50(2) R76UI2120(1)40(2) R76UI2150(1)40(2) R76UI2180(1)50(2) R76UI2220(1)50(2) R76UI2270(1)50(2) R76UN1100(1)00(2) R76UN1120(1)00(2) R76UN1150(1)00(2) R76UN1180(1)00(2) R76UN1220(1)00(2) R76UN1270(1)00(2) R76UN1330(1)00(2) R76UN1390(1)00(2) R76UN1470(1)00(2) R76UN1560(1)00(2) R76UN1680(1)00(2) R76UN1820(1)30(2) R76UN2100(1)30(2) R76UN2120(1)30(2) R76UN2150(1)40(2) R76UN2180(1)40(2) R76UN2220(1)40(2) R76UN2270(1)40(2) R76UN2330(1)40(2) R76UN2390(1)50(2) R76UN2390(1)40(2) R76UN2470(1)40(2) R76UN2560(1)40(2) R76UN2680(1)50(2) R76UN2820(1)50(2) R76UN3100(1)50(2) R76UR2220(1)30(2) R76UR2270(1)30(2) R76UR2330(1)30(2) R76UR2390(1)20(2) R76UR2470(1)30(2) R76UR2470(1)L0(2) R76UR2560(1)30(2) R76UR2560(1)L0(2) R76UR2680(1)30(2) R76UR2680(1)L0(2) R76UR2820(1)40(2) KEMET Internal Part Number Customer Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (2) H = 2.5% (only for C ≥ 1,000 pF), J = 5%, K = 10% (*) Irms value that leads to a ΔT of ≈ 20°C in the hot spot > THS = TAMB + ΔT = 85°C + 20°C = 105°C © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 21 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Table 1 – Ratings & Part Number Reference cont. VDC VAC Cap Value (µF) 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 0.082 0.1 0.12 0.15 0.18 0.22 0.033 0.039 0.047 0.056 0.068 0.082 0.082 0.1 0.1 0.12 0.12 0.15 0.15 0.18 0.18 0.22 0.27 0.33 0.39 0.47 0.56 VDC VAC Cap Value Dimensions in mm Lead Spacing (S) dV/dt (V/µs) Max K0 (V2/µs) 2,500 2,500 2,500 2,500 2,500 2,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 10,000,000 10,000,000 10,000,000 10,000,000 10,000,000 10,000,000 6,000,000 6,000,000 6,000,000 6,000,000 6,000,000 6,000,000 6,000,000 6,000,000 6,000,000 6,000,000 6,000,000 6,000,000 6,000,000 6,000,000 6,000,000 6,000,000 6,000,000 6,000,000 6,000,000 6,000,000 6,000,000 T H L 24.0 14.0 18.0 18.0 22.0 22.0 11.0 11.0 11.0 11.0 11.0 11.0 24.0 13.0 24.0 13.0 24.0 16.0 24.0 16.0 24.0 19.0 20.0 20.0 24.0 24.0 30.0 15.0 28.0 33.0 33.0 37.0 37.0 22.0 22.0 22.0 22.0 22.0 22.0 15.0 24.0 15.0 24.0 15.0 28.5 19.0 28.5 19.0 32.0 40.0 40.0 44.0 44.0 45.0 32.0 32.0 32.0 32.0 32.0 32.0 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 L Lead Spacing (S) T H dV/dt (V/µs) Max K0 (V2/µs) ESL ESR max Irms max (*) Ipkr Lead Length 2x 4 mm at 100 kHz at 100 kHz 85°C Apk nH mΩ Arms (°C/W) 205 250 300 375 450 550 50 59 71 84 102 123 123 150 150 180 180 225 225 270 270 330 405 495 585 705 840 18 18 18 18 18 18 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 14 11 20 16 13 11 24 20 17 20 16 14 14 11 11 20 20 16 16 13 13 11 9 7 8 7 6 7.4 8.3 6.6 7.4 8.5 9.4 5.5 6.0 6.6 6.1 6.7 7.4 7.8 8.4 8.6 6.3 6.4 7.5 7.4 8.2 8.1 9.4 11.0 12.1 11.9 13.1 14.8 27 26 23 23 21 21 27 27 27 27 27 27 24 25 24 25 24 23 23 23 23 21 19 19 17 17 16 Apk Lead Length 2x 4 mm at 100 kHz at 100 kHz 85°C (°C/W) Ipkr ESL ESR max Irms max (*) Rth Rth KEMET Internal Part Number Customer Part Number 76UR2820(1)L0(2) 76UR3100(1)30(2) 76UR3120(1)30(2) 76UR3150(1)30(2) 76UR3180(1)30(2) 76UR3220(1)30(2) 76UW2330(1)30(2) 76UW2390(1)30(2) 76UW2470(1)30(2) 76UW2560(1)30(2) 76UW2680(1)30(2) 76UW2820(1)30(2) 76UW2820(1)L0(2) 76UW3100(1)30(2) 76UW3100(1)L0(2) 76UW3120(1)30(2) 76UW3120(1)L0(2) 76UW3150(1)30(2) 76UW3150(1)L0(2) 76UW3180(1)30(2) 76UW3180(1)L0(2) 76UW3220(1)30(2) 76UW3270(1)30(2) 76UW3330(1)30(2) 76UW3390(1)30(2) 76UW3470(1)30(2) 76UW3560(1)30(2) R76UR2820(1)L0(2) R76UR3100(1)30(2) R76UR3120(1)30(2) R76UR3150(1)30(2) R76UR3180(1)30(2) R76UR3220(1)30(2) R76UW2330(1)30(2) R76UW2390(1)30(2) R76UW2470(1)30(2) R76UW2560(1)30(2) R76UW2680(1)30(2) R76UW2820(1)30(2) R76UW2820(1)L0(2) R76UW3100(1)30(2) R76UW3100(1)L0(2) R76UW3120(1)30(2) R76UW3120(1)L0(2) R76UW3150(1)30(2) R76UW3150(1)L0(2) R76UW3180(1)30(2) R76UW3180(1)L0(2) R76UW3220(1)30(2) R76UW3270(1)30(2) R76UW3330(1)30(2) R76UW3390(1)30(2) R76UW3470(1)30(2) R76UW3560(1)30(2) KEMET Internal Part Number Customer Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (2) H = 2.5% (only for C ≥ 1,000 pF), J = 5%, K = 10% (*) Irms value that leads to a ΔT of ≈ 20°C in the hot spot > THS = TAMB + ΔT = 85°C + 20°C = 105°C © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 22 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183°C for SnPb eutectic alloy to 217 – 221°C for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170°C). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm), and great care has to be taken during soldering. The recommended solder profiles from KEMET should be used. Please consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760–1 Edition 2 serves as a solid guideline for successful soldering. Please see Figure 1. Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the above recommended limits may result in degradation or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through-hole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle. Manual Soldering Recommendations Wave Soldering Recommendations 300 Following is the recommendation for manual soldering with a soldering iron. 2+3 seconds max 260°C 250 Second Wave First Wave Recommended Soldering Temperature Temperature (°C) 200 400 Soldering Iron Bit Temperature (°C) 350 300 ∆ T < 150°C Cooling Preheating 150 ca. 2°C/second ca. 3.5°C/second typical ca. 5°C/second Tpreheat 100 Typical 250 50 200 150 0 100 0 40 80 120 160 200 240 Time (seconds) 50 0 0 1 2 3 4 5 6 7 8 Soldering Time (seconds) The soldering iron tip temperature should be set at 350°C (+10°C maximum) with the soldering duration not to exceed more than 3 seconds. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 23 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Soldering Process cont. Wave Soldering Recommendations cont. 1. The table indicates the maximum set-up temperature of the soldering process Figure 1 Film Material Double Metallized Polystyrene and Single Metallized Polypropylene Maximum Preheat Temperature Maximum Peak Soldering Temperature Capacitor Capacitor Capacitor Capacitor Pitch Pitch Pitch Pitch ≤ 15 mm > 15 mm ≤ 15 mm > 15 mm 110°C 130°C 260°C 270°C 2. The maximum temperature measured on the capacitor body: Set the temperature so that the maximum temperature is below the limit: Film Material Maximum Temperature Measured on the Capacitor Body Double Metallized Polystyrene and Single Metallized Polypropylene 120°C (for series R76) Sensor Position Duration: < 60 seconds Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as in normal flow soldering without touching the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected components, and pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document, however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than in double wave flow soldering, and great care must be taken so that the parts are not overheated. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 24 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Construction 1 Section Molded Plastic Case Detailed Cross Section Double-Sided Metallized Polyester Film (Fourth Layer) Molded Plastic Self-Extinguishing Case Resin Polypropylene Film (Third Layer) Margin Double-Sided Metallized Polyester Film (Second Layer) Polypropylene Film (First Layer) Metal Contact Layer Metal Contact Layer DING SCHEME OPTIONS Margin Margin Leads Double-sided Metallized Polyester Film Winding Schemes Polypropylene Film Dielectric Double-sided Metallized Polypropylene Polyester Carrier Film Dielectric Film Double-sided Metallized Polyester Carrier Film 2 Sections 1 Section Low Profile Version Double-sided Metallized Polyester Carrier Film Single-sided Metallized Polypropylene Film Polypropylene Film Dielectric Polypropylene Film Dielectric Double-sided Metallized Polyester Carrier Film 3 Sections © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 Polypropylene • www.kemet.com Film/Foil Single-sided Metallized Polypropylene Film 4 Sections F3034_R76 • 8/14/2023 25 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Marking Pitch – 7.5, 10, 15, & 22.5 Marking Variants* FRONT TOP Series Dielectric Capacitance Capacitance Tolerance Voltage Code Dielectric Capacitance Capacitance Tolerance Voltage Code Date Code Can also be style “19-26” (Year, Calendar Week) Manufacturer’s Logo Series Date Code Can also be style “19-26” (Year, Calendar Week) Manufacturer’s Logo Series Dielectric Date Code Can also be style “19-26” (Year, Calendar Week) Optional Pitch 7.5 Manufacturer’s Logo Series Dielectric Date Code *Differences are caused by technology (clichee, laser, or ink) and technic (production line) Slight change in the layout can be possible but this does not affect the content of the information of the current marking. This change will be achieved without impact to product form, fit or function, as the products are equivalent with respect to physical, mechanical, quality and reliability characteristics. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 26 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Marking cont. Pitch – 7.5, 10, 15, 22.5, 27.5, & 37.5 FRONT Marking Variants* TOP Series Manufacturer’s Logo Dielectric Capacitance Rated Voltage Date Code Capacitance Tolerance QA-Number Hot marking imprinting with or without color Series Manufacturer’s Logo Dielectric Capacitance Rated Voltage Date Code Pitch – 22.5, 27.5, & 37.5 Marking Variants* FRONT TOP Series Dielectric Capacitance Tolerance Manufacturer’s Logo Rated Voltage Capacitance Date Code QA-Number * Differences are caused by technology (clichee, laser, or ink) and technic (production line) Slight change in the layout can be possible but this does not affect the content of the information of the current marking. This change will be achieved without impact to product form, fit or function, as the products are equivalent with respect to physical, mechanical, quality and reliability characteristics. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 27 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Marking cont. Manufacturing Date Code (IEC–60062) Year Code Month Code 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 A B C D E F H J K L January February March April May June July August September October 1 2 3 4 5 6 7 8 9 O 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 M N P R S T U V W X A November December N D © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 28 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Packaging Quantities Lead Spacing Thickness Height (mm) (mm) Length Bulk (mm) Short Leads Lead and Packaging Code Bulk Long Leads Standard Reel ø 355 mm Large Reel ø 500 mm Ammo Taped JA - JB JE - JH - SE Z31 - JM2 40 - 50 GY - CK1 CK DQ 1,500 2,000 1,500 1,000 1,750 1,500 1,000 800 - 2,100 1,500 1,200 1,000 - 2,800 2,100 1,600 1,350 7.5 3.0 4.0 5.0 6.0 8.0 9.0 10.5 12.0 10.0 10.0 10.0 10.5 10 4.0 5.0 6.0 9.0 11.0 12.0 13.0 13.0 13.0 2,000 1,300 1,000 2,200 2,000 1,800 1,800 1,500 1,200 750 600 500 1,500 1,250 1,000 1,000 800 680 15 4.0 5.0 6.0 7.5 8.5 9.0 10.0 11.0 13.0 10.0 11.0 12.0 13.5 14.5 12.5 16.0 19.0 12.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 2,500 2,000 1,750 1,000 1,000 1,000 750 450 750 1,500 1,250 1,000 800 650 700 550 400 520 1,500 1,000 900 700 500 520 500 350 490 750 600 500 350 300 270 270 270 200 1,500 1,250 1,000 800 700 650 600 500 480 1,000 800 680 500 440 410 380 340 280 22.5 6.0 7.0 8.5 10.0 11.0 13.0 14.5 15.0 16.0 17.0 18.5 20.0 22.0 29.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 805 700 468 396 360 300 264 450 450 350 350 200 150 120 500 500 300 300 250 200 - 300 250 250 160 160 130 - 700 550 450 350 350 300 - 464 380 280 235 217 - 27.5 9.0 11.0 13.0 13.0 13.0 14.0 16.0 18.0 22.0 24.0 17.0 20.0 12.0 22.0 25.0 28.0 30.0 33.0 37.0 15.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 816 560 672 480 480 352 288 256 168 336           - 408 336 288 288 288 176 144 128 112 144 230 190  150       - 450 350 300 -           - 37.5 11.0 13.0 16.0 19.0 20.0 24.0 24.0 24.0 30.0 22.0 24.0 28.5 32.0 40.0 15.0 19.0 44.0 45.0 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 420 360 216 192 126 252 216 108 90          - 252 216 108 96 84 108 108 72 60          - -          - 1 Only for 7.5 mm lead spacing. 2 Only for > 7.5 mm lead spacing. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 29 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) Lead Spacing 10 & 15 mm Figure 1 — Lead Spacing 7.5 mm P P2 P Lead Spacing 22.5 & 27.5 mm P P1 ∆h ∆h ∆h P2 P ∆h W2 A H0 B Ød W0 P0 F W1 W2 H0 W0 W D0 W1 B W t t P1 F A−B t A Ød P0 D0 A−B P1 P2 t Taping Specification Description Dimensions (mm) Symbol 7.5 10.0 Lead Spacing 15.0 22.5 27.5 Tolerance Lead wire diameter d 0.5 – 0.6 0.6 0.6 – 0.8 0.8 0.8 ±0.05 Taping lead space P 12.7 25.4 25.4 38.1 38.1 ±1 Feed hole lead space * P0 12.7 12.7 12.7 12.7 12.7 ±0.2 ** Centering of the lead wire P1 2.6 7.7 5.2 7.8 5.3 ±0.7 Centering of the body P2 6.35 12.7 12.7 19.05 19.05 ±1.3 F 7.5 10.0 15.0 22.5 27.5 +0.6/−0.1 Component alignment Lead spacing *** ∆h 0 0 0 0 0 ±2 Component deviation ∆p 0 0 0 0 0 ±1 Height of component from tape center H0 **** 18.5 18.5 18.5 18.5 18.5 ±0.5 Carrier tape width W 18 18 18 18 18 +1/−0.5 Hold down tape width W0 6 9 10 10 10 Minimum Hole position W1 9 9 9 9 9 ±0.5 Hold down tape position W2 3 3 3 3 3 Maximum Feed hole diameter D0 4 4 4 4 4 ±0.2 Total Tape thickness t 0.7 0.7 0.7 0.7 0.7 ±0.2 * Available also 15 mm. ** Maximum 1 mm on 20 lead spacing. *** 15 mm and 10 mm taped to 7.5 mm (crimped leads) available upon request. **** H0 = 16.5 mm is available upon request. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 30 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) cont. Ammo Specifications Dimensions (mm) H W T 360 340 59 H T Reel Specifications W Dimensions (mm) D H W 355 500 30 25 55 Maximum D H W © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 31 Film Capacitors – Polypropylene Pulse/High Frequency Capacitors R76, Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer YAGEO Corporation and its affi liates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space fl ight. All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. Additional information about production site flexibility can be found KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3034_R76 • 8/14/2023 32