SC-10-18J

AC Line Filters Common Mode SC Coils, SC-J Series, Terminal Base Type Overview Applications The KEMET SC-J coils are common mode chokes with a wide variety of characteristics. These toroidal coils are designed with our proprietary ferrite cores and are useful in various noise countermeasure fields. • Audio-visual equipment • Home appliances • Power supplies Benefits • Proprietary 5H, 7H and 10H ferrite materials and equivalents • Suitable for ≥ 150 kHz range • Wide variety of sizes and specifications • Operating temperature range from −40°C to +105°C or +120°C • UL94 V–0 flame retardant rated base and cap Part Number System SCSeries SC 10Dimension Code (See Dimensions) Blank 22 Rated Current (A) 0x = x A x0 = x0 A xx = xx A Examples: 02 = 2 A 10 = 10 A 15 = 15 A Thermal Class Blank E = Class E Note: With exceptions, see Table 1 for details. Note: With exceptions, see Table 1 for details. 20 J Inductance (mH) Minimum Terminal Base Type Internal Control Code J Blank A B M MI N P x0 = x mH xx = x.x mH 0x = 0.x mH xxx = xx.x mH Examples: 20 = 2 mH 15 = 1.5 mH 05 = 0.5 mH 115 = 11.5 mH Note: With exceptions, see Table 1 for details. Built Into Tomorrow © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0006_SC-J • 9/25/2023 1 AC Line Filters – Common Mode SC Coils, SC-J Series, Terminal Base Type Magnetic Permeability of Ferrite Material In order to achieve most efficient noise reduction, it is important to select the material according to the target frequency band. Depending on its magnetic permeability, a particular ferrite material will be effective in a certain frequency band. A schematic representation of the relationship between the magnetic permeability of each material and the corresponding effective band range is shown in Figure 1. Materials with higher magnetic permeability are effective in the lower frequency range, while those with lower magnetic permeability are effective in the higher frequency range. Thus, Mn-Zn products are mainly used for reducing conduction noise, while Ni-Zn products are commonly used for radiation noise countermeasures. The effective frequency range varies depending on core shape, size and number of windings. This frequency dependence of the magnetic permeability as shown in the figure serves for reference purposes only and it should be tested on the actual device to determine its effectiveness. S18H, S15H, 10H, 7H, 5H, 1400L and 700L are KEMET’s proprietary ferrite material names. Other materials can also be available on request. Figure 1 - Relationship between the magnetic permeability of each material and its effective frequency range 20,000 Higher magnetic permeability: Higher noise suppression effect in the lower frequency range Mn-Zn Series Magnetic Permeability S18H S15H 10H 10,000 Lower magnetic permeability: Higher noise suppression effect in the higher frequency range 7H 5H Ni-Zn Series 0 10 kHz 1400L 700L 100 kHz 1 MHz 10 MHz 100 MHz 1 GHz Effective Frequency Range © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0006_SC-J • 9/25/2023 2 AC Line Filters – Common Mode SC Coils, SC-J Series, Terminal Base Type Dimensions – Millimeters OD T (a) Part Name SC-02-10J SC-02-20J SC-02-30J SC-02-50J SC-02-70J SC-02-100J SC-02-E115J SC-02-E120J SC-02-300J SC22-025-290J SC-03-28J SC-03-30J SC-03-55J SC-03-67J SC-03-85J SC-04-20JN SC-05-50J SC-05-80J SC22-04-100J SC-04-200J SC-04-E17J SC-04-E50J SC-05-06J SC-05-10J SC-05-15J SC-05-21J SC-05-20J SC-05-27J SC-05-30J SC22-05-30J SC22-05-70J SC-05-100J SC-06-10J-B SC-06-35J SC-06-40J SC-06-60J SC22-06-60J SC-07-10J SC-07-30JM SC-07-42J 1 (b) Dimensions (mm) OD T H (Maximum) (Maximum) (Maximum) 25.0 25.0 25.0 25.0 25.0 25.0 25.0 24.0 33.0 30.0 25.0 25.0 25.0 24.0 25.0 25.0 34.0 34.0 30.0 34.0 23.5 23.5 25.0 25.0 25.0 34.0 34.0 25.0 34.0 28.0 28.0 34.0 25.0 34.0 35.0 34.0 29.5 34.0 33.0 34.0 20.0 20.0 20.0 20.0 20.0 20.0 15.4 16.0 23.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 23.0 23.0 22.0 23.0 19.4 19.4 20.0 20.0 20.0 23.0 23.0 20.0 23.0 18.5 18.5 23.0 20.0 24.0 25.0 25.0 20.5 23.0 23.0 24.0 27.0 27.0 27.0 27.0 27.0 27.0 27.5 25.0 33.0 29.0 27.0 27.0 27.0 26.0 27.0 27.0 33.0 33.0 32.0 33.0 24.0 24.0 27.0 27.0 27.0 33.0 33.0 27.0 33.0 29.0 29.0 33.0 27.0 33.0 33.0 33.0 29.5 33.0 33.0 33.0 N2 L N1 (b) H (a) Pin Pitch1 (Reference) L a b 5.00±2.0 5.00±2.0 5.00±2.0 5.00±2.0 5.00±2.0 5.00±2.0 3.50±1.0 3.50±1.5 7.00±2.0 5.00±2.0 5.00±2.0 5.00±2.0 5.00±2.0 5.00±1.0 5.00±2.0 5.00±2.0 5.00±2.0 5.00±2.0 3.50±1.0 5.00±2.0 3.30±1.0 3.30±1.0 10.00±2.0 5.00±2.0 3.40±1.0 5.00±2.0 5.00±2.0 5.00±2.0 5.00±2.0 5.00±2.0 5.00±2.0 5.00±2.0 4.50±1.0 3.50±1.0 5.00±1.0 5.00±2.0 5.00±2.0 5.00±1.5 3.75±1.0 4.50±1.0 10 10 10 10 10 10 13 13 18 10 10 10 10 10 10 10 18 18 18 18 20 20 10 10 22 18 18 10 18 10 10 18 10 12 18 18 10 18 18 18 15 15 15 15 15 15 11 11 16 15 15 15 15 15 15 15 16 16 16 16 16.5 16.5 15 15 19 16 16 15 16 15 15 16 15 17 16 16 15 16 16 16 Pin pitch listed above for reference only. Values not guaranteed. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0006_SC-J • 9/25/2023 3 AC Line Filters – Common Mode SC Coils, SC-J Series, Terminal Base Type Dimensions – Millimeters cont. OD T (a) Part Name SC-07-70J SC-07-90J SC-07-50J SC-08-E075J SC-08-20J SC-08-30J SC-08-44J SC-08-100JM SC-10-E035J SC-10-10J SC-10-14J SC-10-15J-MI SC-10-18J SC-10-20J SC-10-30J SC-10-E55J SC-11-16J SC-11-20J SC-12-E035J SC-12-15J SC-14-12J SC-15-02J SC-15-05J SC-15-07J SC-15-09J SC-15-10J SC-15-12J-MI SC-15-E37J SC-18-05J SC-18-10J SC-18-085J SC-18-095J SC-18-E12J SC-18-E15J SC-18-25J SC-20-01J-A SC-20-03J SC-20-05J-P SC-20-E085JM SC-20-E18J 1 (b) Dimensions (mm) OD T H (Maximum) (Maximum) (Maximum) 35.0 34.0 34.0 25.0 34.0 34.0 35.0 41.0 25.0 34.0 34.0 34.0 34.0 42.0 34.0 44.0 35.0 35.0 25.0 42.0 34.0 34.0 34.0 36.0 36.0 44.0 35.0 44.0 44.0 35.0 36.0 36.0 50.0 44.0 44.0 35.0 35.0 36.0 46.0 50.0 25.0 23.0 24.0 16.0 23.0 23.0 23.0 32.0 16.0 23.0 24.0 23.0 24.0 29.0 24.0 30.0 23.0 23.0 16.0 29.0 24.0 23.0 23.0 25.0 25.0 30.0 25.0 30.0 30.0 24.0 25.0 25.0 31.0 30.0 30.0 24.0 24.0 25.0 32.0 31.0 35.0 33.0 33.0 25.5 33.0 33.0 33.0 40.0 24.0 33.0 33.0 34.0 33.0 44.0 33.0 44.0 33.0 33.0 25.5 44.0 33.0 33.0 33.0 35.0 35.0 44.0 35.0 44.0 44.0 33.0 35.0 35.0 50.0 44.0 44.0 34.0 34.0 35.0 46.0 53.0 N2 L N1 (b) H (a) Pin Pitch1 (Reference) L a b 5.00±2.0 5.00±2.0 4.10±1.5 3.50±1.0 7.00±2.0 5.00±2.0 5.00±2.0 3.50±1.0 4.00±1.5 5.00±2.0 5.00±2.0 3.75±1.0 7.00±2.0 5.00±2.0 5.00±2.0 5.00±2.0 5.00±2.0 5.00±2.0 4.00±1.5 5.00±2.0 5.00±2.0 5.00±2.0 5.00±2.0 5.00±2.0 5.00±2.0 5.00±2.0 3.75±1.0 5.00±2.0 5.00±2.0 5.00±2.0 5.00±2.0 5.00±2.0 4.10±1.0 5.00±2.0 4.50±1.0 4.50±1.0 4.50±1.0 5.00±2.0 5.00±2.0 5.00±2.0 18 18 18 19.5 12 18 18 18 19.5 12 12 12 18 18 18 18 18 18 19.5 18 18 18 18 18 18 18 18 18 18 18 18 18 40 18 18 18 18 18 18 40 16 16 16 11 17 16 16 16 11 17 17 17 16 22 16 22 16 16 11 22 16 16 16 16 16 22 16 22 22 16 16 16 25 12 22 16 16 16 22 25 Pin pitch listed above for reference only. Values not guaranteed. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0006_SC-J • 9/25/2023 4 AC Line Filters – Common Mode SC Coils, SC-J Series, Terminal Base Type Environmental Compliance All KEMET AC line filters are RoHS Compliant. Performance Characteristics Item Performance Characteristics Rated Voltage Withstanding Voltage Insulation Resistance Rated Current Range Rated Inductance Range Inductance Measurement Condition Thermal Class 250 VAC/VDC 2,400 V (2 seconds, between lines) > 100 MΩ at 500 VDC (between lines) 2 – 20 A 0.15 – 30 mH minimum 1 kHz, 10 kHz, 16kHz, and 100 kHz A (105°C) and E (120°C) Operating Temperature Range −40°C to +105°C (include self temperature rise) and −40°C to +120°C (include self temperature rise) Table 1 – Ratings & Part Number Reference Part Number Rated Current (A) Inductance (mH) Minimum DC Resistance/ Line (mΩ) Maximum Temperature Rise (K) Maximum Wire Diameter (mm) Thermal Class Weight (g) Approximate SC-02-10J SC-02-20J SC-02-30J SC-02-50J SC-02-70J SC-02-100J SC-02-E115J SC-02-E120J SC-02-300J SC22-025-290J 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.5 1.0000 4 2.0000 4 3.0000 4 5.0000 4 7.0000 1 10.0000 4 11.5000 2 12.0000 2 30.0000 1 29.0000 2 100.0 110.0 110.0 120.0 110.0 220.0 155.0 180.0 300.0 250.0 40.0 40.0 40.0 40.0 40.0 55.0 55.0 70.0 45.0 65.0 0.60 0.60 0.60 0.60 0.60 0.50 0.50 0.55 0.60 0.60 E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) 15.0 15.0 16.0 20.0 18.2 18.0 13.0 13.0 36.9 31.4 Part Number Rated Current (A) Inductance (mH) DC Resistance/Line Temperature Rise Minimum (mΩ) Maximum (K) Maximum Wire Diameter (mm) Thermal Class Weight (g) Approximate Inductance Measurement Condition: 1 kHz Inductance Measurement Condition: 10 kHz 3 Inductance Measurement Condition: 16 kHz 4 Inductance Measurement Condition: 100 kHz 1 2 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0006_SC-J • 9/25/2023 5 AC Line Filters – Common Mode SC Coils, SC-J Series, Terminal Base Type Table 1 – Ratings & Part Number Reference cont. Part Number Rated Current (A) Inductance (mH) Minimum DC Resistance/ Line (mΩ) Maximum Temperature Rise (K) Maximum Wire Diameter (mm) Thermal Class Weight (g) Approximate SC-03-28J SC-03-30J SC-03-55J SC-03-67J SC-03-85J SC-04-20JN SC-05-50J SC-05-80J SC22-04-100J SC-04-200J SC-04-E17J SC-04-E50J SC-05-06J SC-05-10J SC-05-15J SC-05-20J SC-05-21J SC-05-27J SC-05-30J SC22-05-30J SC22-05-70J SC-05-100J SC-06-10J-B SC-06-35J SC-06-40J SC-06-60J SC22-06-60J SC-07-10J SC-07-30JM SC-07-42J SC-07-70J SC-07-90J SC-07-50J SC-08-E075J SC-08-20J 3.0 3.0 3.0 3.0 3.0 4.0 4.0 4.0 4.0 4.0 4.3 4.3 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 6.0 6.0 6.0 6.0 6.0 7.0 7.0 7.0 7.0 7.0 7.3 8.0 8.0 2.8000 2 3.0000 4 5.5000 4 6.7000 4 8.5000 2 2.0000 4 5.0000 4 8.0000 4 10.0000 2 20.3000 1 1.7850 2 5.1800 2 0.6000 4 1.0000 4 1.5000 4 2.0000 4 2.0000 4 2.7000 1 3.0000 4 3.0000 2 7.0000 2 10.5000 3 1.0000 1 3.5000 2 4.0000 1 6.0000 2 6.0000 2 1.0000 4 3.0000 2 4.2000 4 7.0000 1 9.0000 2 5.0000 2 0.7500 2 2.0000 4 55.0 110.0 110.0 105.0 110.0 50.0 80.0 90.0 71.0 150.0 31.8 56.4 27.0 50.0 40.0 70.0 40.0 40.0 70.0 50.0 60.0 100.0 30.0 50.0 40.0 60.0 46.0 24.0 39.0 42.0 40.0 50.0 27.0 12.7 50.0 40.0 50.0 60.0 65.0 60.0 50.0 60.0 60.0 50.5 55.0 45.0 70.0 40.0 40.0 45.0 40.0 35.0 57.0 55.0 50.0 75.0 55.0 45.0 51.0 50.0 70.0 83.0 45.0 50.0 65.0 65.0 85.0 55.0 55.0 45.0 0.70 0.65 0.65 0.65 0.65 0.80 0.80 0.80 0.80 0.80 0.70 0.70 0.80 0.80 0.80 0.80 1.00 0.80 0.80 0.80 0.80 0.90 0.85 1.00 1.10 1.00 0.90 1.00 1.00 1.10 1.10 1.00 1.20 0.90 1.20 E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) 18.7 19.6 22.0 21.0 22.0 20.4 32.0 42.0 30.0 43.2 16.5 19.2 16.7 20.0 18.7 25.0 38.6 19.4 30.0 30.6 31.9 40.8 18.9 40.0 47.9 44.1 29.0 34.3 43.0 45.2 45.0 45.8 53.0 16.4 45.6 Part Number Rated Current (A) Inductance (mH) DC Resistance/Line Temperature Rise Minimum (mΩ) Maximum (K) Maximum Wire Diameter (mm) Thermal Class Weight (g) Approximate Inductance Measurement Condition: 1 kHz Inductance Measurement Condition: 10 kHz 3 Inductance Measurement Condition: 16 kHz 4 Inductance Measurement Condition: 100 kHz 1 2 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0006_SC-J • 9/25/2023 6 AC Line Filters – Common Mode SC Coils, SC-J Series, Terminal Base Type Table 1 – Ratings & Part Number Reference cont. Part Number Rated Current (A) Inductance (mH) Minimum DC Resistance/ Line (mΩ) Maximum Temperature Rise (K) Maximum Wire Diameter (mm) Thermal Class Weight (g) Approximate SC-08-30J SC-08-44J SC-08-100JM SC-10-E035J SC-10-10J SC-10-14J SC-10-15J-MI SC-10-18J SC-10-20J SC-10-30J SC-10-E55J SC-11-16J SC-11-20J SC-12-E035J SC-12-15J SC-14-12J SC-15-02J SC-15-05J SC-15-07J SC-15-09J SC-15-10J SC-15-12J-MI SC-15-E37J SC-18-05J SC-18-085J SC-18-095J SC-18-E12J SC-18-E15J SC-18-25J SC-20-01J-A SC-20-03J SC-20-05J-P SC-18-10J SC-20-E085JM SC-20-E18J 8.0 8.0 8.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 11.0 11.0 12.0 12.0 14.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 18.0 18.0 18.0 18.0 18.0 18.0 20.0 20.0 20.0 20.0 20.0 20.0 3.0000 4 4.4000 4 13.0000 4 0.3500 2 1.0000 4 1.4000 4 1.5000 4 1.6000 1 2.0000 4 3.0000 4 5.5000 2 1.6000 2 2.0000 2 0.3500 2 1.5000 4 1.2000 2 0.2000 4 0.5000 4 0.7020 4 0.9000 4 1.0000 4 1.2000 2 3.7000 2 0.5000 4 0.8500 2 0.9500 2 1.2000 2 1.5000 2 2.5000 2 0.1500 1 0.3000 1 0.4875 4 0.7000 4 1.2000 2 1.8000 2 54.0 25.0 50.0 8.0 20.0 18.0 15.7 20.0 22.0 30.0 24.0 13.0 14.0 8.0 18.0 12.2 6.0 8.0 10.0 20.0 12.0 6.2 16.0 7.0 6.0 5.5 9.0 8.0 10.0 4.0 4.0 3.6 20.0 6.0 6.8 55.0 50.0 70.0 46.0 40.0 65.0 65.0 55.0 50.0 75.0 70.0 45.0 50.0 60.0 50.0 55.0 45.0 60.0 60.0 65.0 55.0 60.0 92.0 50.0 75.0 56.0 65.0 60.0 60.0 50.0 50.0 60.0 72.0 46.0 65.0 1.00 1.20 1.30 1.00 1.30 1.30 1.30 1.30 1.40 1.20 1.40 1.20 1.40 1.10 1.50 1.50 1.60 1.50 1.60 1.50 1.70 1.60 1.50 1.80 1.60 1.70 1.70 1.70 1.70 1.80 1.80 1.80 1.70 2.10 2.00 E (120°C) E (120°C) E (120°C) E (120°C) A (105°C) E (120°C) E (120°C) E (120°C) A (105°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) A (105°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) A (105°C) E (120°C) E (120°C) A (105°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) 40.9 46.1 93.0 11.0 42.0 43.9 45.0 45.2 70.0 65.0 82.0 35.0 44.1 11.0 70.0 45.0 43.0 40.0 46.4 45.5 75.0 45.2 82.4 60.0 45.0 45.0 110.0 80.0 77.0 39.6 39.4 44.2 45.4 90.0 115.0 Part Number Rated Current (A) Inductance (mH) DC Resistance/Line Temperature Rise Minimum (mΩ) Maximum (K) Maximum Wire Diameter (mm) Thermal Class Weight (g) Approximate Inductance Measurement Condition: 1 kHz Inductance Measurement Condition: 10 kHz 3 Inductance Measurement Condition: 16 kHz 4 Inductance Measurement Condition: 100 kHz 1 2 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0006_SC-J • 9/25/2023 7 AC Line Filters – Common Mode SC Coils, SC-J Series, Terminal Base Type Frequency Characteristics 1M SC-02-10J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 1k 100 10 1 1 1k 1M 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-02-30J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M SC-02-50J 100 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-02-70J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 1M 1k 100k 1k 100 10 10k Frequency (Hz) SC-02-100J 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-02-E115J 1M 100k 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k Frequency (Hz) 1 1k 1M 10k 10 1 1M SC-02-20J 1k 100 10 10k Frequency (Hz) SC-02-E120J 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 1k 10k Frequency (Hz) LF0006_SC-J • 9/25/2023 8 AC Line Filters – Common Mode SC Coils, SC-J Series, Terminal Base Type Frequency Characteristics cont. 1M SC-02-300J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 1k 100 10 1 1 1k 1M 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-03-28J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M SC-03-30J 100 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-03-55J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 1M 1k 100k 1k 100 10 10k Frequency (Hz) SC-03-67J 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-03-85J 1M 100k 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k Frequency (Hz) 1 1k 1M 10k 10 1 1M SC22-025-290J 1k 100 10 10k Frequency (Hz) SC-04-20JN 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 1k 10k Frequency (Hz) LF0006_SC-J • 9/25/2023 9 AC Line Filters – Common Mode SC Coils, SC-J Series, Terminal Base Type Frequency Characteristics cont. 1M SC-05-50J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 1k 100 10 1 1 1k 1M 10k 100k Frequency (Hz) 1M 10M 30M 1k SC22-04-100J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M SC-04-200J 100 10k 100k Frequency (Hz) 1M 10M 1k 30M SC-04-E17J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 1M 1k 100k 1k 100 10 10k Frequency (Hz) SC-04-E50J 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-05-06J 1M 100k 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k Frequency (Hz) 1 1k 1M 10k 10 1 1M SC-05-80J 1k 100 10 10k Frequency (Hz) SC-05-10J 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 1k 10k Frequency (Hz) LF0006_SC-J • 9/25/2023 10 AC Line Filters – Common Mode SC Coils, SC-J Series, Terminal Base Type Frequency Characteristics cont. 1M SC-05-15J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 1k 100 10 1 1 1k 1M 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-05-20J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 1k 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M SC-05-27J 100 10k 100k Frequency (Hz) 1M 10M 1k 30M SC-05-30J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 1M 1k 100k 1k 100 10k Frequency (Hz) SC22-05-30J 1k 100 10 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M 1k SC22-05-70J 1M 100k 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k Frequency (Hz) 1 1 1M 10k 10 10 1M SC-05-21J 1k 100 10 10k Frequency (Hz) SC-05-100J 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 1k 10k Frequency (Hz) LF0006_SC-J • 9/25/2023 11 AC Line Filters – Common Mode SC Coils, SC-J Series, Terminal Base Type Frequency Characteristics cont. 1M SC-06-10J-B 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 1k 100 10 1 1 1k 1M 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-06-40J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 1k 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M SC-06-60J 100 10k 100k Frequency (Hz) 1M 10M 30M 1k SC22-06-60J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 1M 1k 100k 1k 100 10 10k Frequency (Hz) SC-07-10J 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-07-30JM 1M 100k 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k Frequency (Hz) 1 1 1M 10k 10 10 1M SC-06-35J 1k 100 10k Frequency (Hz) SC-07-42J 1k 100 10 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 1k 10k Frequency (Hz) LF0006_SC-J • 9/25/2023 12 AC Line Filters – Common Mode SC Coils, SC-J Series, Terminal Base Type Frequency Characteristics cont. 1M SC-07-70J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 1k 100 10 10 1 1 1k 1M 10k 100k Frequency (Hz) 1M 10M 1k 30M SC-07-50J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M SC-08-E075J 100 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-08-20J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 1M 1k 100k 1k 100 10 10k Frequency (Hz) SC-08-30J 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-08-44J 1M 100k 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k Frequency (Hz) 1 1k 1M 10k 10 1 1M SC-07-90J 1k 100 10 10k Frequency (Hz) SC-08-100JM 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 1k 10k Frequency (Hz) LF0006_SC-J • 9/25/2023 13 AC Line Filters – Common Mode SC Coils, SC-J Series, Terminal Base Type Frequency Characteristics cont. 1M SC-10-E035J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 1k 100 10 1 1 1k 1M 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-10-14J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M SC-10-15J-MI 100 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-10-18J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 1M 1k 100k 1k 100 10 10k Frequency (Hz) SC-10-20J 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-10-30J 1M 100k 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k Frequency (Hz) 1 1k 1M 10k 10 1 1M SC-10-10J 1k 100 10 10k Frequency (Hz) SC-10-E55J 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 1k 10k Frequency (Hz) LF0006_SC-J • 9/25/2023 14 AC Line Filters – Common Mode SC Coils, SC-J Series, Terminal Base Type Frequency Characteristics cont. 1M SC-11-16J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 1k 100 10 1 1 1k 1M 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-12-E035J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M SC-12-15J 100 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-14-12J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 1M 1k 100k 1k 100 10 10k Frequency (Hz) SC-15-02J 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-15-05J 1M 100k 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k Frequency (Hz) 1 1k 1M 10k 10 1 1M SC-11-20J 1k 100 10 10k Frequency (Hz) SC-15-07J 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 1k 10k Frequency (Hz) LF0006_SC-J • 9/25/2023 15 AC Line Filters – Common Mode SC Coils, SC-J Series, Terminal Base Type Frequency Characteristics cont. 1M SC-15-09J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 1k 100 10 1 1 1k 1M 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-15-12J-MI 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 1k 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M SC-15-E37J 100 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-18-05J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 1M 1k 100k 1k 100 10k Frequency (Hz) SC-18-10J 1k 100 10 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 1k 30M SC-18-085J 1M 100k 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k Frequency (Hz) 1 1 1M 10k 10 10 1M SC-15-10J 1k 100 10 10k Frequency (Hz) SC-18-095J 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 1k 10k Frequency (Hz) LF0006_SC-J • 9/25/2023 16 AC Line Filters – Common Mode SC Coils, SC-J Series, Terminal Base Type Frequency Characteristics cont. 1M SC-18-E12J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 1k 100 10 1 1 1k 1M 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-18-25J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M SC-20-01J-A 100 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-20-03J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 1M 1k 100k 1k 100 10k Frequency (Hz) SC-20-05J-P 1k 100 10 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-20-E085JM 1M 100k 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k Frequency (Hz) 1 1k 1M 10k 10 1 1M SC-18-E15J 1k 100 10 10k Frequency (Hz) SC-20-E18J 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 1k 10k Frequency (Hz) LF0006_SC-J • 9/25/2023 17 AC Line Filters – Common Mode SC Coils, SC-J Series, Terminal Base Type Packaging Type SC-02-10J SC-02-20J SC-02-30J SC-02-50J SC-02-70J SC-02-100J SC-02-E115J SC-02-E120J SC-02-300J SC22-025-290J SC-03-28J SC-03-30J SC-03-55J SC-03-67J SC-03-85J SC-04-20JN SC-05-50J SC-05-80J SC22-04-100J SC-04-200J SC-04-E17J SC-04-E50J SC-05-06J SC-05-10J SC-05-15J SC-05-21J SC-05-20J SC-05-27J SC-05-30J SC22-05-30J SC22-05-70J SC-05-100J SC-06-10J-B SC-06-35J SC-06-40J SC-06-60J SC22-06-60J SC-07-10J SC-07-30JM SC-07-42J Packaging Type Pieces Per Box 400 150 200 400 200 Tray 360 400 200 400 200 150 180 400 180 200 150 200 180 200 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Type SC-07-70J SC-07-90J SC-07-50J SC-08-E075J SC-08-20J SC-08-30J SC-08-44J SC-08-100JM SC-10-E035J SC-10-10J SC-10-14J SC-10-15J-MI SC-10-18J SC-10-20J SC-10-30J SC-10-E55J SC-11-16J SC-11-20J SC-12-E035J SC-12-15J SC-14-12J SC-15-02J SC-15-05J SC-15-07J SC-15-09J SC-15-10J SC-15-12J-MI SC-15-E37J SC-18-05J SC-18-10J SC-18-085J SC-18-095J SC-18-E12J SC-18-E15J SC-18-25J SC-20-01J-A SC-20-03J SC-20-05J-P SC-20-E085JM SC-20-E18J Packaging Type Pieces Per Box 200 150 200 160 150 200 180 200 160 200 160 200 Tray 150 160 200 160 180 75 160 200 180 200 45 60 160 200 180 60 LF0006_SC-J • 9/25/2023 18 AC Line Filters – Common Mode SC Coils, SC-J Series, Terminal Base Type Handling Precautions Precautions for product storage AC Line Filters should be stored in normal working environments. While the chokes themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70% relative humidity. Atmospheres should be free of chlorine and sulfur bearing compounds. Temperature fluctuations should be minimized to avoid condensation on the parts. Avoid storage near strong magnetic fields, as this might magnetize the product. For optimized solderability, AC line filters stock should be used promptly and preferably within 6 months of receipt. Product temperature rise values The values listed for temperature rise are the result of self-heating in wires when the rated current (commercial frequency) is applied. When using the product, check and evaluate the value of the core temperature rise under actual operating conditions. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0006_SC-J • 9/25/2023 19 AC Line Filters – Common Mode SC Coils, SC-J Series, Terminal Base Type KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer YAGEO Corporation and its affi liates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space fl ight. All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. When providing KEMET products and technologies contained herein to other countries, the customer must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the International Traffi c in Arms Regulations (ITAR), the US Export Administration Regulations (EAR) and the Japan Foreign Exchange and Foreign Trade Act. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0006_SC-J • 9/25/2023 20