SC-15-20JH

AC Line Filters Common Mode SC Coils, SC-JH Series, Terminal Base Type Overview Applications The KEMET SC-JH coils are common mode chokes with a wide variety of characteristics. These toroidal coils are designed with our proprietary ferrite cores and are useful in various noise countermeasure fields. • Audio-visual equipment • Home appliances • Power supplies Benefits • Proprietary 5H, 7H, 10H, and 700L ferrite material and equivalents • Suitable for ≥ 150 kHz range • High frequency (700L) • Wide variety of sizes and specifications • Operating temperature range from -25°C to +105°C or +120°C • UL 94 V–2 or V–0 flame retardant rated base and cap Part Number System SCSeries SC Dimension Code (See Dimensions) Blank 22 10- 20 JH Rated Current (A) Inductance (mH) Minimum Terminal Base Type Internal Control Code JH Blank P Thermal Class x0 = x0 A xx = xx A Blank E = Class E Examples: 10 = 10 A 15 = 15 A Note: With exceptions, see Table 1 for details. x0 = x mH xx = x.x mH xxx = x.xx mH Examples: 20 = 2 mH 15 = 1.5 mH 200 = 2.00 mH Note: JR is the same terminal base type as JH Note: With exceptions, see Table 1 for details. One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0010_SC-JH • 11/12/2019 1 AC Line Filters – Common Mode SC Coils, SC-JH Series, Terminal Base Type Magnetic Permeability of Ferrite Material In order to achieve most efficient noise reduction, it is important to select the material according to the target frequency band. Depending on its magnetic permeability, a particular ferrite material will be effective in a certain frequency band. A schematic representation of the relationship between the magnetic permeability of each material and the corresponding effective band range is shown in Figure 1. Materials with higher magnetic permeability are effective in the lower frequency range, while those with lower magnetic permeability are effective in the higher frequency range. Thus, Mn-Zn products are mainly used for reducing conduction noise, while Ni-Zn products are commonly used for radiation noise countermeasures. The effective frequency range varies depending on core shape, size and number of windings. This frequency dependence of the magnetic permeability as shown in the figure serves for reference purposes only and it should be tested on the actual device to determine its effectiveness. S18H, S15H, 10H, 7H, 5H, 1400L and 700L are KEMET’s proprietary ferrite material names. Other materials can also be available on request. Figure 1 - Relationship between the magnetic permeability of each material and its effective frequency range 20,000 Higher magnetic permeability: Higher noise suppression effect in the lower frequency range Mn-Zn Series Magnetic Permeability S18H S15H 10H 10,000 Lower magnetic permeability: Higher noise suppression effect in the higher frequency range 7H 5H Ni-Zn Series 0 10 kHz 1400L 700L 100 kHz 1 MHz 10 MHz 100 MHz 1 GHz Effective Frequency Range © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0010_SC-JH • 11/12/2019 2 AC Line Filters – Common Mode SC Coils, SC-JH Series, Terminal Base Type Dimensions – Millimeters Figure 1 Figure 2 OD H OD L H L (a) (a) (a) N2 N1 (b) N1 Figure 3 Figure 4 OD H L (a) OD H N2 (b) (b) T (b) (a) L (a) (a) N1 N2 (b) (b) N2 T N1 (b) (b) (a1) (a2) Figure 5 Figure 6 OD H OD L H L (a) (a) (a) N2 N1 N2 (b) (b) T N1 (b) T (b) (a) Figure 7 OD H L (a) N1 Part Name SC-030-E110JH-P SC-030-E150JH-P SC-040-E063JH-P SC-040-E092JH-P SC22-05-30JH SC-05-E45JH SC-05-492JH SC22-05-70JH SC-05-700JH SC-05-812JH SC-06-182JH SC-06-E200JH SC-06-382JH SC-06-462JH SC22-06-70JH SC-07-E030JH-P SC-07-276JH SC-07-E042JH SC-09-E075JH SC-09-209JH 1 N2 (b) (b) (a) Dimensions (mm) OD T H (Maximum) (Maximum) (Maximum) 31.0 31.0 31.0 31.0 29.0 25.0 34.0 28.0 34.0 34.0 35.0 25.0 35.0 35.0 28.0 24.0 35.0 34.0 24.0 34.0 32.0 32.0 32.0 32.0 31.0 23.0 32.5 33.0 32.5 32.5 25.0 32.5 32.5 24.5 32.5 24.5 32.0 15.0 14.5 15.0 15.0 23.0 21.0 18.0 19.5 18.0 18.0 18.0 20.5 18.0 18.0 19.5 15.0 18.0 27.0 15.0 18.5 Pin Pitch1 (Reference) L a b 3.5±1.0 3.5±1.0 3.5±1.0 3.5±1.0 5.0±2.0 3.5±1.0 3.5±1.0 5.0±2.0 3.5±1.0 3.5±1.0 3.5±1.0 3.5±1.0 3.5±1.0 3.5±1.0 5.0±2.0 3.5±1.0 3.5±1.0 4.5±1.0 3.5±1.0 3.5±1.0 25 25 25 25 14 a1:10, a2:14 11 20 11 11 11 10 11 11 20 12 11 11 12 11 27.5 27.5 27.5 27.5 22 19 28 14 28 28 28 19 28 28 14 20 28 28 20 28 Figure Fig. 4 Fig. 4 Fig. 4 Fig. 4 Fig. 2 Fig. 3 Fig. 5 Fig. 7 Fig. 5 Fig. 5 Fig. 5 Fig. 2 Fig. 5 Fig. 5 Fig. 7 Fig. 6 Fig. 5 Fig. 1 Fig. 6 Fig. 5 Pin pitch listed above for reference only. Values not guaranteed. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0010_SC-JH • 11/12/2019 3 AC Line Filters – Common Mode SC Coils, SC-JH Series, Terminal Base Type Dimensions – Millimeters cont. Figure 1 Figure 2 OD H OD L H L (a) (a) (a) N2 N1 (b) N1 Figure 3 Figure 4 OD H L (a) OD H N2 (b) (b) T (b) (a) L (a) (a) N1 N2 (b) (b) N2 T N1 (b) (b) (a1) (a2) Figure 5 Figure 6 OD H OD L H L (a) (a) (a) N2 N1 N2 (b) (b) T N1 (b) T (b) (a) Figure 7 OD H L (a) N1 Part Name SC-10-20JH SC-10-55JH SC-10-E80JH SC-12-15JH SC-12-100JH SC-14-15JH SC-15-05JH SC-15-10JH SC-15-12JH SC-15-20JH SC-15-35JH SC-15-E50JH SC-17-E27JH SC-18-15JH SC-18-E15JH SC-20-10JH SC-20-10JR SC-20-20JH SC-20-E20JH SC-30-12JH 1 N2 (b) (b) (a) Dimensions (mm) OD T H (Maximum) (Maximum) (Maximum) 42.0 51.0 53.0 42.0 65.0 42.0 44.0 44.0 44.0 51.0 51.0 42.0 44.0 51.0 51.0 51.0 51.0 51.0 51.0 65.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 - 30.0 34.0 35.0 30.0 40.0 28.0 32.0 32.0 32.0 34.0 34.0 30.0 32.0 34.0 34.0 34.0 34.0 34.0 34.0 40.0 Pin Pitch1 (Reference) L a b 5.0±2.0 5.0±2.0 4.5±1.5 5.0±2.0 5.0±2.0 5.0±2.0 5.0±2.0 5.0±2.0 5.0±2.0 5.0±2.0 5.0±2.0 5.0±2.0 5.0±1.0 5.0±2.0 5.0±2.0 5.0±2.0 5.0±2.0 5.0±2.0 5.0±2.0 4.6±1.5 17 26 26 17 35 17 17 17 17 26 15 17 17 26 26 15 15 26 26 55 30 30 30 30 44 30 30 30 30 30 35 30 30 30 30 35 35 30 30 20 Figure Fig. 2 Fig. 1 Fig. 1 Fig. 2 Fig. 1 Fig. 2 Fig. 2 Fig. 2 Fig. 2 Fig. 1 Fig. 1 Fig. 2 Fig. 2 Fig. 1 Fig. 1 Fig. 1 Fig. 1 Fig. 1 Fig. 1 Fig. 1 Pin pitch listed above for reference only. Values not guaranteed. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0010_SC-JH • 11/12/2019 4 AC Line Filters – Common Mode SC Coils, SC-JH Series, Terminal Base Type Environmental Compliance All KEMET AC line filters are RoHS Compliant. Performance Characteristics Item Performance Characteristics Rated Voltage Withstanding Voltage Insulation Resistance Rated Current Range Rated Inductance Range Inductance Measurement Condition Thermal Class 250 VAC/VDC 2,400 V (2 seconds, between lines) > 100 MΩ at 500 VDC (between lines) 3 – 30 A 0.03 – 15 mH minimum 1 kHz, 10 kHz, and 100 kHz A (105°C) and E (120°C) Operating Temperature Range −25°C to +105°C (include self temperature rise) and −25°C to +120°C (include self temperature rise) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0010_SC-JH • 11/12/2019 5 AC Line Filters – Common Mode SC Coils, SC-JH Series, Terminal Base Type Table 1 – Ratings & Part Number Reference Part Number Rated Current (A) Inductance (mH) Minimum DC Resistance/ Line (mΩ) Maximum Temperature Rise (K) Maximum Wire Diameter (mm) Thermal Class Weight (g) Approximate SC-030-E110JH-P SC-030-E150JH-P SC-040-E063JH-P SC-040-E092JH-P SC22-05-30JH SC-05-E45JH SC-05-492JH SC22-05-70JH SC-05-700JH SC-05-812JH SC-06-182JH SC-06-E200JH SC-06-382JH SC-06-462JH SC22-06-70JH SC-07-E030JH-P SC-07-276JH SC-07-E042JH SC-09-E075JH SC-09-209JH SC-10-20JH SC-10-55JH SC-10-E80JH SC-12-15JH SC-12-100JH SC-14-15JH SC-15-05JH SC-15-10JH SC-15-12JH SC-15-20JH SC-15-35JH SC-15-E50JH SC-17-E27JH SC-18-15JH SC-18-E15JH SC-20-10JH SC-20-10JR SC-20-20JH SC-20-E20JH SC-30-12JH 3 3 4 4 5 5 5 5 5 5 6 6 6 6 6 7 7 7 9 9 10 10 10 12 12 14 15 15 15 15 15 15 17 18 18 20 20 20 20 30 10.99 3 15.00 2 6.30 2 9.17 2 3.00 2 4.50 3 4.90 2 7.00 2 7.00 2 8.10 2 1.80 2 2.00 2 3.80 2 4.60 2 7.00 2 0.03 3 2.76 2 4.20 3 0.75 2 2.09 2 2.00 3 5.50 1 8.00 2 1.50 3 10.00 3 1.50 3 0.50 3 1.00 3 1.20 2 2.00 3 3.50 1 5.20 2 2.75 3 1.50 3 1.50 3 1.00 3 1.00 3 2.00 3 2.00 3 1.20 3 42.0 160.0 58.8 79.2 60.0 50.0 45.0 60.0 55.0 65.0 30.0 21.5 40.0 45.0 70.0 20.0 24.0 42.0 9.0 17.4 22.0 30.0 40.0 18.0 32.0 14.0 8.0 12.0 12.0 12.0 20.0 19.3 14.0 10.0 10.0 8.0 8.0 10.0 10.0 6.0 60 80 56 67 60 85 65 85 75 75 40 55 65 110 75 60 65 65 60 74 45 65 75 45 78 55 40 50 55 45 80 85 110 55 55 50 50 80 80 40 0.70 0.60 0.80 0.75 0.80 0.70 0.90 0.80 0.90 0.90 1.10 0.90 1.00 1.00 0.90 0.80 1.10 1.10 1.10 1.20 1.40 1.40 1.40 1.50 1.60 1.60 1.70 1.70 1.70 1.80 1.60 1.50 1.60 1.90 1.90 2.00 2.00 1.90 1.90 2.60 E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) E (120°C) A (105°C) A (105°C) E (120°C) A (105°C) A (105°C) A (105°C) A (105°C) A (105°C) A (105°C) A (105°C) A (105°C) E (120°C) E (120°C) A (105°C) E (120°C) A (105°C) A (105°C) A (105°C) E (120°C) A (105°C) 26.5 22.0 25.0 26.5 23.4 19.0 30.0 27.0 29.7 34.0 26.0 19.0 29.0 31.0 21.1 15.0 32.0 53.0 13.0 31.0 72.0 112.3 118.8 71.0 190.0 78.6 65.3 73.0 73.0 115.0 114.3 83.8 83.1 117.0 114.0 110.0 109.0 114.1 119.4 188.0 Inductance Measurement Condition: 1 kHz Inductance Measurement Condition: 10 kHz 3 Inductance Measurement Condition: 100 kHz 1 2 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0010_SC-JH • 11/12/2019 6 AC Line Filters – Common Mode SC Coils, SC-JH Series, Terminal Base Type Frequency Characteristics 1M SC-030-E110JH-P 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 1k 100 10 1 1 1k 1M 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-040-E063JH-P 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M SC-040-E092JH-P 100 10k 100k Frequency (Hz) 1M 10M 30M 1k SC22-05-30JH 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 1M 1k 100k 1k 100 10 10k Frequency (Hz) SC-05-E45JH 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-05-492JH 1M 100k 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k Frequency (Hz) 1 1k 1M 10k 10 1 1M SC-030-E150JH-P 1k 100 10 10k Frequency (Hz) SC22-05-70JH 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 1k 10k Frequency (Hz) LF0010_SC-JH • 11/12/2019 7 AC Line Filters – Common Mode SC Coils, SC-JH Series, Terminal Base Type Frequency Characteristics cont. 1M SC-05-700JH 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 1k 100 10 10 1 1 1k 1M 10k 100k Frequency (Hz) 1M 10M 1k 30M SC-06-182JH 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M SC-06-E200JH 100 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-06-382JH 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 1M 1k 100k 1k 100 10 10k Frequency (Hz) SC-06-462JH 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 1k 30M SC22-06-70JH 1M 100k 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k Frequency (Hz) 1 1k 1M 10k 10 1 1M SC-05-812JH 1k 100 10 10k Frequency (Hz) SC-07-E030JH-P 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 1k 10k Frequency (Hz) LF0010_SC-JH • 11/12/2019 8 AC Line Filters – Common Mode SC Coils, SC-JH Series, Terminal Base Type Frequency Characteristics cont. 1M SC-07-276JH 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 1k 100 10 10 1 1 1k 1M 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-09-E075JH 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M SC-09-209JH 100 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-10-20JH 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 1M 1k 100k 1k 100 10 10k Frequency (Hz) SC-10-55JH 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 1k 30M SC-10-E80JH 1M 100k 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k Frequency (Hz) 1 1k 1M 10k 10 1 1M SC-07-E042JH 1k 100 10 10k Frequency (Hz) SC-12-15JH 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 1k 10k Frequency (Hz) LF0010_SC-JH • 11/12/2019 9 AC Line Filters – Common Mode SC Coils, SC-JH Series, Terminal Base Type Frequency Characteristics cont. 1M SC-12-100JH 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 1k 100 10 1 1 1k 1M 10k 100k Frequency (Hz) 1M 10M 1k 30M SC-15-05JH 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M SC-15-10JH 100 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-15-12JH 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 1M 1k 100k 1k 100 10 10k Frequency (Hz) SC-15-20JH 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-15-35JH 1M 100k 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k Frequency (Hz) 1 1k 1M 10k 10 1 1M SC-14-15JH 1k 100 10 10k Frequency (Hz) SC-15-E50JH 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 1k 10k Frequency (Hz) LF0010_SC-JH • 11/12/2019 10 AC Line Filters – Common Mode SC Coils, SC-JH Series, Terminal Base Type Frequency Characteristics cont. 1M SC-17-E27JH 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 1k 100 10 1 1 1k 1M 10k 100k Frequency (Hz) 1M 10M 1k 30M SC-18-E15JH 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M SC-20-10JH 100 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-20-10JR 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 1M 1k 100k 1k 100 10 10k Frequency (Hz) SC-20-20JH 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M 1k SC-20-E20JH 1M 100k 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k Frequency (Hz) 1 1k 1M 10k 10 1 1M SC-18-15JH 1k 100 10 10k Frequency (Hz) SC-30-12JH 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 1k 10k Frequency (Hz) LF0010_SC-JH • 11/12/2019 11 AC Line Filters – Common Mode SC Coils, SC-JH Series, Terminal Base Type Packaging Type Packaging Type SC-030-E110JH-P SC-030-E150JH-P SC-040-E063JH-P SC-040-E092JH-P SC22-05-30JH SC-05-E45JH SC-05-492JH SC22-05-70JH SC-05-700JH SC-05-812JH SC-06-182JH SC-06-E200JH SC-06-382JH SC-06-462JH SC22-06-70JH SC-07-E030JH-P SC-07-276JH SC-07-E042JH SC-09-E075JH SC-09-209JH Pieces Per Box 180 250 200 180 200 Tray 180 200 180 250 180 150 250 180 Type SC-10-20JH SC-10-55JH SC-10-E80JH SC-12-15JH SC-12-100JH SC-14-15JH SC-15-05JH SC-15-10JH SC-15-12JH SC-15-20JH SC-15-35JH SC-15-E50JH SC-17-E27JH SC-18-15JH SC-18-E15JH SC-20-10JH SC-20-10JR SC-20-20JH SC-20-E20JH SC-30-12JH Packaging Type Pieces Per Box 100 45 Tray 100 48 60 Handling Precautions Precautions for product storage AC Line Filters should be stored in normal working environments. While the chokes themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70% relative humidity. Atmospheres should be free of chlorine and sulfur bearing compounds. Temperature fluctuations should be minimized to avoid condensation on the parts. Avoid storage near strong magnetic fields, as this might magnetize the product. For optimized solderability, AC line filters stock should be used promptly and preferably within 6 months of receipt. Product temperature rise values The values listed for temperature rise are the result of self-heating in wires when the rated current (commercial frequency) is applied. When using the product, check and evaluate the value of the core temperature rise under actual operating conditions. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0010_SC-JH • 11/12/2019 12 AC Line Filters – Common Mode SC Coils, SC-JH Series, Terminal Base Type KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. When providing KEMET products and technologies contained herein to other countries, the customer must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the International Traffi c in Arms Regulations (ITAR), the US Export Administration Regulations (EAR) and the Japan Foreign Exchange and Foreign Trade Act. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0010_SC-JH • 11/12/2019 13