SMP253MA4330MTR24

Class Y2 Impregnated Metallized Paper EMI Suppression Capacitors SMP253, Class Y2, 250 VAC SMD (Automotive Grade) Overview Applications Multilayer, metallized paper, encapsulated and impregnated in self-extinguishing material that meets the requirements of UL 94 V–0. For worldwide use as an electromagnetic interference suppressor in all Y2 applications, line-to-earth. Benefits • High dv/dt capability • Impregnated paper that ensures excellent stability and reliability properties, particularly in applications with continuous operation • Approvals: ENEC, cULus • Rated voltage: 250 VAC 50/60 Hz, maximum recommended DC voltage 1,500 VDC • Capacitance range: 0.001 – 0.0047 µF • Size code: 5045, 12.7 mm • Capacitance tolerance: ±20% • Automotive (AEC-Q200) grade Customer Part Number System SMP253 M A 4100 M TR24 Series Rated Voltage (VAC) Chip Length (mm) Capacitance Code (pF) Capacitance Tolerance Packaging Y2, Metallized Paper M = 250 A = 12.7 The last three digits represent significant figures. The first digit specifies the total number of digits. M = ±20% See Table 1 KEMET Internal Part Number System P 101 AA 102 M 250 V Capacitor Class Series Chip Size Capacitance Code (pF) Capacitance Tolerance Rated Voltage (VAC) Packaging P = Paper Y2, Metallized Paper See Dimension Table First two digits represent significant figures. Third digit specifies number of zeros. M = ±20% 250 = 250 See Ordering Options Table Built Into Tomorrow © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3018_SMP253_Y2_250 • 9/5/2023 1 Class Y2 Impregnated Metallized Paper EMI Suppression Capacitors – SMP253, Class Y2, 250 VAC SMD (Automotive Grade) Benefits cont. • Climatic category: 40/100/56/B, IEC 60068–1 • Tape & Reel packaging in accordance with IEC 60286–3 • RoHS compliance and lead-free terminations • Operating temperature range of −40°C to +100°C • 100% screening factory test at 3,000 VDC • Highest possible safety regarding active and passive flammability • Excellent self-healing properties ensure long life, even when subjected to frequent overvoltages • Good resistance to ionization due to impregnated dielectric • High dv/dt capability • Impregnated paper that ensures excellent stability and reliability, particularly in applications with continuous operation Ordering Options Table Packaging Type KEMET Packaging Code Legacy Packaging Code V A TR24 BULK Y TV24 Standard Lead and Packaging Options Tape & Reel (Standard Reel) Bulk (Bag) Other Lead and Packaging Options Tape & Reel (Vertical Orientation Standard Reel) Dimensions – Millimeters Chip Size W T L F EIA Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 5045 11.5 −0 /+0.6 6.5 −0/+0.4 12.7 −0/+0.4 0.5 Nominal © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3018_SMP253_Y2_250 • 9/5/2023 2 Class Y2 Impregnated Metallized Paper EMI Suppression Capacitors – SMP253, Class Y2, 250 VAC SMD (Automotive Grade) Performance Characteristics Rated Voltage 250 VAC 50/60 Hz Capacitance Range 0.001 – 0.0047 µF Capacitance Tolerance Temperature Range ±20% −40°C to +100°C Climatic Category 40/100/56/B Approvals ENEC, cULus Dissipation Factor Test Voltage Between Terminals Insulation Resistance Maximum Values at +23°C 1 kHz 1.3% The 100% screening factory test is carried out at 3,000 VDC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. This test may not be repeated due to potential capacitor damage. KEMET is not liable for any failures that result from repeating the test. Between Terminals 12,000 MΩ Qualification Automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AEC–Q200, Stress Test Qualification for Passive Components. For additional information regarding the Automotive Electronics Council and AEC–Q200, please visit their website at www.aecouncil.com. Cleaning/Storage and Moisture Recommendations Cleaning Suggestions To clean the PCB assembly KEMET recommends to use a suitable solvent like Isopropyl alcohol, deionized water or neutral pH detergents. Aggressive solvents shall not be used. For any different cleaning solvent used please contact KEMET Technical Services to analyze the potential impact on KEMET products. Storage and Moisture Recommendations KEMET SMD film capacitors are supplied in a moisture barrier bag (MBB) Class 1. We can guarantee a 24 month shelf life (temperature ≤ 40°C/relative humidity ≤ 90%). After the MBB has been opened, components may stay in areas with controlled temperature and humidity (temperature ≤ 30°C/relative humidity ≤ 60%) for 168 hours (MSL 3). For longer periods of time and/or higher temperature and/or higher relative humidity values, it is absolutely necessary to protect the components against humidity. If the reel inside the MBB is partially used, KEMET recommends to re-use the same MBB or to avoid areas without controlled temperature and humidity (see above). If the above conditions are not respected, components require baking (minimum time: 48 hours at 55 ±5°C, ≤ 5% RH) before the reflow. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3018_SMP253_Y2_250 • 9/5/2023 3 Class Y2 Impregnated Metallized Paper EMI Suppression Capacitors – SMP253, Class Y2, 250 VAC SMD (Automotive Grade) Environmental Test Data Test IEC Publication Procedure Impulse Voltage and Endurance IEC 60384–14 Vibration IEC 60068–2–6 Test Fc Bump IEC 60068–2–27 Test Eb 4,000 bumps at 390 m/s2 Rapid Change of Temperature IEC 60068–2–14 Test Na Upper and lower rated temperature 5 cycles Active Flammability IEC 60384–14 Passive Flammability IEC 60384–14 IEC 60695–11–5 Humidity IEC 60068–2–3 Test Ca +40°C and 90 – 95% R.H. Damp Heat Steady State IEC 60068-2-78 Test Cab +40 ±2°C and 93 ±3% R.H., 56 days 1.7 x VR VAC 50 Hz, once every hour increse to 1,000 VAC for 0.1 second, 1,000 hours at upper rated temperature. 3 directions at 2 hours each 10 – 500 Hz at 0.75 mm or 98 m/s2 VR + 20 surge pulses at 5 kV (pulse every 5 seconds) Needle-flame test Approvals Certification Body Mark Specification File Number IMQ S.p.A. EN/IEC 60384–14 CA08.00226 UL UL 60384 and CAN/CSA E60384–14 E97797 Environmental Compliance All KEMET EMI capacitors are RoHS compliant. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3018_SMP253_Y2_250 • 9/5/2023 4 Class Y2 Impregnated Metallized Paper EMI Suppression Capacitors – SMP253, Class Y2, 250 VAC SMD (Automotive Grade) Table 1 – Ratings & Part Number Reference Capacitance Value (µF) Maximum Dimensions in mm dV/dt (V/µs) KEMET Part Number Customer Part Number 12.7 2,000 P101AA102M250(1) SMP253MA4100M(1) 12.7 2,000 P101AA152M250(1) SMP253MA4150M(1) 6.5 12.7 2,000 P101AA222M250(1) SMP253MA4220M(1) W −0/+0.6 T −0/+0.4 L −0/+0.4 0.0010 11.5 6.5 0.0015 11.5 6.5 0.0022 11.5 0.0025 11.5 6.5 12.7 2,000 P101AA252M250(1) SMP253MA4250M(1) 0.0033 11.5 6.5 12.7 2,000 P101AA332M250(1) SMP253MA4330M(1) 0.0039 11.5 6.5 12.7 2,000 P101AA392M250(1) SMP253MA4390M(1) 0.0047 11.5 6.5 12.7 2,000 P101AA472M250(1) SMP253MA4470M(1) Capacitance Value (µF) W (mm) T (mm) L (mm) dV/dt (V/µs) KEMET Part Number Customer Part Number (1) Insert packaging code. See Ordering Options Table for available options. Soldering Process © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 280 Max. 250°C 240 223°C Temperature (°C) Reflow soldering temperature is measured on the top body surface of the component. Use the recommended soldering profiles for convection reflow ovens and IR reflow ovens. If a vapor phase reflow oven is used, consult KEMET. Exceeding the manufacturer’s process recommendations may harm the component. KEMET is not liable for any defect caused by exceeding recommendations. According to international standards, the maximum temperature capability must be measured on the top surface of a component. The international standards do not define how the thermocouple should be fastened on the component. Our recommendation for attaching the thermocouple to the top surface of the component is to glue it with high-temperature resistant glue. 200 170°C 160 150°C 120 Min. 30 seconds, Max. 50 seconds, above 217°C 80 40 0 0 30 60 90 120 150 180 210 240 270 300 330 Time (s) F3018_SMP253_Y2_250 • 9/5/2023 5 Class Y2 Impregnated Metallized Paper EMI Suppression Capacitors – SMP253, Class Y2, 250 VAC SMD (Automotive Grade) Construction Detailed Cross Section Terminals Metallized Impregnated Paper (First Layer) Molded Plastic Case Self-Extinguishing Resin Margin Leadframe Metallized Impregnated Paper (Second Layer) Metal Contact Layer Metal Contact Layer Margin Molded Plastic Case Marking Manufacturer’s Logo Series Rated Voltage Capacitor Class Manufacturing Date Code Approvals Packaging Quantities Chip Size EIA Thickness (mm) Height (mm) Length (mm) 5045 11.5 6.5 12.7 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Standard Reel (330 mm) Horizontal Orientation Vertical Orientation 600 400 F3018_SMP253_Y2_250 • 9/5/2023 6 Class Y2 Impregnated Metallized Paper EMI Suppression Capacitors – SMP253, Class Y2, 250 VAC SMD (Automotive Grade) Carrier Taping & Packaging (IEC 60286–3) +0.1 Ø1.5 −0 W2 K0 D W 4.0 ±0.1 1.75 ±0.1 2.0 ±0.05 Horizontal Taping Orientation A0 P1 EIA Size Code Horizontal Mounting 5045 Direction of Unreeling W1 Dimensions in mm Taping Specification A0 P1 B0 K0 D W1 W2 B H L W Nominal Nominal Nominal −0/+0.3 +/−0.1 Nominal Nominal Nominal ±2.0 −0/+2 Maximum 11.5 6.5 12.7 24.0 16.0 11.9 13.1 6.8 330 24.4 30.0 W2 Vertical Taping Orientation A0 B0 W P1 K0 D Side View W1 EIA Size Code Vertical Mounting 5026 (5045) Dimensions in mm Taping Specification B0 K0 D W1 W2 H L W Nominal Nominal Nominal −0/+0.3 +/−0.1 Nominal Nominal Nominal ±2.0 −0/+2 Maximum 12.7 6.5 11.5 24.0 16.0 6.9 13.1 11.8 330 24.4 30.0 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com P1 A0 B F3018_SMP253_Y2_250 • 9/5/2023 7 Class Y2 Impregnated Metallized Paper EMI Suppression Capacitors – SMP253, Class Y2, 250 VAC SMD (Automotive Grade) KEMET Electronics Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer YAGEO Corporation and its affiliates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space flight. All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. Additional information about production site flexibility can be found KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3018_SMP253_Y2_250 • 9/5/2023 8