AC Line Filters
Common Mode SS Coils, 20H Series
Overview
Applications
The KEMET SS Coils, SS20H Type AC line filters are offered
in a wide variety of sizes and specifications.
• Consumer Electronics
• Common mode choke
Benefits
• Wide variety of sizes and specifications
• Inductances up to 66 mH
• Rated Currents up to 2 A
• DC Resistances as low as 0.11 Ω
Part Number System
SS
20
H-
R
03
660
Series
Core Size (mm)
Core Orientation
Core Type
Rated Current AC (A)
Inductance (mH) Minimum
SS
20 = 20.0 mm
H- = Horizontal
Blank = Standard
0x = 0.x A
R = High permeability xx = x.x A
xx0 = xx mH
0xx = x.x mH
Examples:
03 = 0.3 A
13 = 1.3 A
Examples:
660 = 66 mH
052 = 5.2 mH
One world. One KEMET
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
LF0027_SS20H • 1/31/2020
1
AC Line Filters – Common Mode SS Coils, 20H Series
Dimensions – Millimeters
Marking
22 Maximum
13
10
18.5 Maximum
13 ±0.5
3.5 ±1.0
ø0.8
22 Maximum
10 ±0.5
Environmental Compliance
All KEMET AC Line Filters are RoHS Compliant.
Table 1 – Ratings & Part Number Reference
Part Number
Rated Current
AC (A)
Inductance
(mH)
Minimum
DC Resistance/
Line (Ω)
Maximum
Temperature
Rise (K)
Maximum
Marking
Weight (g)
Approximate
SS20H-03510
SS20H-04340
SS20H-05270
SS20H-06150
SS20H-07130
SS20H-08100
SS20H-10080
SS20H-12050
SS20H-13044
SS20H-15029
SS20H-20018
SS20H-R03660
SS20H-R04450
SS20H-R05350
SS20H-R06200
SS20H-R07160
SS20H-R08125
SS20H-R10100
SS20H-R12063
SS20H-R13052
SS20H-R15033
SS20H-R20023
0.3
0.4
0.5
0.6
0.7
0.8
1.0
1.2
1.3
1.5
2.0
0.3
0.4
0.5
0.6
0.7
0.8
1.0
1.2
1.3
1.5
2.0
51.0
34.0
27.0
15.0
13.0
10.0
8.0
5.0
4.4
2.9
1.8
66.0
45.0
35.0
20.0
16.0
12.5
10.0
6.3
5.2
3.3
2.3
3.20
2.00
1.50
0.93
0.75
0.66
0.42
0.36
0.25
0.19
0.11
3.20
2.00
1.50
0.93
0.75
0.66
0.42
0.36
0.25
0.19
0.11
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
03 Lot No.
04 Lot No.
05 Lot No.
06 Lot No.
07 Lot No.
08 Lot No.
10 Lot No.
12 Lot No.
13 Lot No.
15 Lot No.
20 Lot No.
R03 Lot No.
R04 Lot No.
R05 Lot No.
R06 Lot No.
R07 Lot No.
R08 Lot No.
R10 Lot No.
R12 Lot No.
R13 Lot No.
R15 Lot No.
R20 Lot No.
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
LF0027_SS20H • 1/31/2020
2
AC Line Filters – Common Mode SS Coils, 20H Series
Specifications
Item
SS20H
Rated Voltage
250 VAC
Withstanding Voltage
2,400 VAC (2 seconds, between lines)
Insulation Resistance
> 100 MΩ at 500 VDC (between lines)
Rated Current AC Range
0.3 – 2.0 A
Rated Inductance Range
1.8 – 66.0 mH minimum
Inductance Measurement Condition
1 kHz
Thermal Class
E (120°C)
Operating Temperature Range
−25°C to +120°C (include self temperature rise)
Common mode
Frequency
Characteristics
Frequency characteristic
1M 1
1M 1
6
3
03510
03510
10K 1
6
3
07130
0
7130
1K 1
6
3
0
6150
06150
100 1
6
3
0
5270
05270
10 1
6
3
1
1K
3
6
1
3
10K
6
1
3
6
100K
1
3
6
1M
1
10M
Frequency (Hz)
3
2
0018
20018
6
3
15029
6
3
13044
13044
3
6
1
3
10K
6
1
3
6
100K
1
3
6
1M
1
10M
Frequency (Hz)
6
3
3
30M
R
10100
R10100
100K 1
R03660
R03660
Impedance ()
Impedance ()
08100
08100
100 1
1
1K
30M
R04450
R
04450
6
3
R07160
R
07160
1K 1
6
3
R05350
R
05350
100 1
R
06200
R06200
6
3
10 1
1
1K
6
3
1K 1
6
3
100K 1
6
3
10K 1
1M 1
6
3
10K 1
1
0080
10080
6
3
10 1
1M 1
6
3
1
2050
12050
100K 1
Impedance ()
Impedance ()
100K 1
6
3
6
3
04340
04340
6
3
R
12063
R12063
10K 1
6
3
R08125
R08125
1K 1
R
20023
R20023
6
3
100 1
R
15033
R15033
6
3
R13052
R
13052
10 1
3
6
1
10K
3
6
1
100K
3
6
1
1M
Frequency (Hz)
3
6
1
10M
3
30M
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
6
3
1
1K
3
6
1
10K
3
6
1
100K
3
6
1
1M
Frequency (Hz)
3
6
1
10M
3
30M
LF0027_SS20H • 1/31/2020
3
AC Line Filters – Common Mode SS Coils, 20H Series
Handling Precautions
Precautions for product storage
AC Line Filters should be stored in normal working environments. While the chokes themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and
long term storage.
KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70%
relative humidity. Atmospheres should be free of chlorine and sulfur bearing compounds. Temperature fluctuations should
be minimized to avoid condensation on the parts. Avoid storage near strong magnetic fields, as this might magnetize the
product.
For optimized solderability, AC line filters stock should be used promptly and preferably within 6 months of receipt.
Product temperature rise values
The values listed for temperature rise are the result of self-heating in wires when the rated current (commercial frequency)
is applied.
When using the product, check and evaluate the value of the core temperature rise under actual operating conditions.
Export Control
For customers in Japan
For products that are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license
specified by the law is required for export.
For customers outside Japan
AC line filters should not be used or sold for the use in the development, production, stockpiling, or utilization of any
conventional weapons, mass-destruction weapons (nuclear, chemical, biological weapons, or missiles), or any other
weapons.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
LF0027_SS20H • 1/31/2020
4
AC Line Filters – Common Mode SS Coils, 20H Series
KEMET Electronics Corporation Sales Offices
For a complete list of our global sales offi ces, please visit www.kemet.com/sales.
Disclaimer
All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no
obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or
property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
When providing KEMET products and technologies contained herein to other countries, the customer must abide by the procedures and provisions stipulated in all
applicable export laws and regulations, including without limitation the International Traffi c in Arms Regulations (ITAR), the US Export Administration Regulations
(EAR) and the Japan Foreign Exchange and Foreign Trade Act.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
LF0027_SS20H • 1/31/2020
5