SS28V-K25075-CH

AC Line Filters Common Mode SS Coils, 28V/H-CH Series Overview Applications The KEMET SS Coils, SS28V/H-CH Type AC line filters are offered in a wide variety of sizes and specifications. • Consumer Electronics • Common mode choke Common mode Benefits • Wide variety of sizes and specifications • Inductances up to 60 mH • Rated Currents up to 2.5 A • DC Resistances as low as 0.16 Ω H Type CH nt] ant] Rated urrent AC(A) 0.8 1.0 1.5 2.0 2.5 0.8 1.0 1.5 2.0 2.5 0.8 1.0 1.5 2.0 2.5 Inductance (mH) min. DC resistance (/line) max. 35 25 System Part Number 10 SS 287.5 V4.5 Core Core Series Size53 (mm) Orientation 41 SS 28 = 28.0 mm V- = Vertical 15.5 H- = Horizontal 11.5 7.5 60 45 17 13 8.0 Temperature rise(K) max. 0.95 45 0.65 45 0.35 50 0.22 45 R 0.16 45 Core Type 0.95 45 0.65 45 Blank = Standard 0.35 50 K = High permeability (μ ≈ 8,000) R0.22 = High permeability (μ ≈ 10,000) 45 0.16 45 0.95 45 0.65 45 0.35 50 0.22 45 0.16 45 Weight approx.(g) V H 29.6 32.0 31.0 33.4 27.6 30.0 32.7 08 600- 30.3 30.5 32.9 Rated Current AC (A) 32.0Inductance (mH) Minimum 29.6 31.0 33.4 0x = 0.x A xx0 = xx mH 27.6 30.0 xx = x.x A 0xx = x.x mH 30.3 32.7 Examples: Examples: 32.9 30.5 08 = 0.8 A 600 = 60 mH 29.6 32.0 15 = 1.5 A 045 = 4.5 mH 31.0 33.4 27.6 30.0 30.3 32.7 32.9 30.5 anding voltage: 2400VAC (2sec between lines) more than 100M (between lines) • Thermal class: E (120˚C)　 –25 to T (T=120–temperature rise) • Inductance measurement condition: 1kHz, 1V, KC530 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com CH Product Type CH One world. One KEMET LF0031_SS28V-H-CH • 1/31/2020 1 AC Line Filters – Common Mode SS Coils, 28V/H-CH Series Dimensions – Millimeters SS28V-CH 24.5 Maximum 24.5 Maximum 24 24 30 Maximum 30 Maximum 20 10 22 Maximum 22 Maximum 30 Maximum 30 Maximum 4.0 ±1.0 10 ±0.510 ±0.5 20 ±0.520 ±0.5 20 13 30 Maximum 30 Maximum 24 ±0.524 ±0.5 10 13 13 ±0.513 ±0.5 ø0.8 ø0.8 4.0 ±1.0 35.5 Maximum 4.0 ±1.0 35.5 Maximum 4.0 ±1.0 ø0.8 ø0.8 SS28H-CH Environmental Compliance All KEMET AC Line Filters are RoHS Compliant. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0031_SS28V-H-CH • 1/31/2020 2 AC Line Filters – Common Mode SS Coils, 28V/H-CH Series Table 1 – Ratings & Part Number Reference Part Number Rated Current AC (A) SS28H-08350-CH SS28V-08350-CH SS28H-10250-CH SS28V-10250-CH SS28H-15100-CH SS28V-15100-CH SS28H-20075-CH SS28V-20075-CH SS28H-25045-CH SS28V-25045-CH SS28H-K08530-CH SS28V-K08530-CH SS28H-K10410-CH SS28V-K10410-CH SS28H-K15155-CH SS28V-K15155-CH SS28H-K20115-CH SS28V-K20115-CH SS28H-K25075-CH SS28V-K25075-CH SS28H-R08600-CH SS28V-R08600-CH SS28H-R10450-CH SS28V-R10450-CH SS28H-R15170-CH SS28V-R15170-CH SS28H-R20130-CH SS28V-R20130-CH SS28H-R25080-CH SS28V-R25080-CH 0.8 0.8 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 0.8 0.8 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 0.8 0.8 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 Inductance (mH) Minimum 35.0 35.0 25.0 25.0 10.0 10.0 7.5 7.5 4.5 4.5 53.0 53.0 41.0 41.0 15.5 15.5 11.5 11.5 7.5 7.5 60.0 60.0 45.0 45.0 17.0 17.0 13.0 13.0 8.0 8.0 DC Resistance/ Line (Ω) Maximum 0.95 0.95 0.65 0.65 0.35 0.35 0.22 0.22 0.16 0.16 0.95 0.95 0.65 0.65 0.35 0.35 0.22 0.22 0.16 0.16 0.95 0.95 0.65 0.65 0.35 0.35 0.22 0.22 0.16 0.16 Temperature Rise (K) Maximum 45 45 45 45 50 50 45 45 45 45 45 45 45 45 50 50 45 45 45 45 45 45 45 45 50 50 45 45 45 45 Weight (g) Approximate 29.6 32.0 31.0 33.4 27.6 30.0 30.3 32.7 30.5 32.9 29.6 32.0 31.0 33.4 27.6 30.0 30.3 32.7 30.5 32.9 29.6 32.0 31.0 33.4 27.6 30.0 30.3 32.7 30.5 32.9 Performance Characteristics Item SS28V/H-CH Rated Voltage 250 VAC Withstanding Voltage 2,400 VAC (2 seconds, between lines) Insulation Resistance > 100 MΩ at 500 VDC (between lines) Rated Current AC Range 0.8 – 2.5 A Rated Inductance Range 4.5 – 60.0 mH minimum Inductance Measurement Condition 1 kHz Thermal Class E (120°C) Operating Temperature Range −25°C to +120°C (include self temperature rise) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0031_SS28V-H-CH • 1/31/2020 3 Common mode AC Line Filters – Common Mode SS Coils, 28V/H-CH Series Frequency Characteristics Frequency characteristic 1M 1M 0 8350 08350 10250 10250 10k 15100 15100 1k 20075 20075 100 1 1k 10k K08530 K08530 10k K15155 K 15155 1k K20115 K 20115 100 K25075 K25075 25046 25046 10 K10410 K10410 100k Impedance (Ω) Impedance (Ω) 100k 10 100k 1M 10M 30M 1M 10M 30M Frequency (Hz) 1 1k 10k 100k 1M Frequency (Hz) 10M 30M 1M R10450 Impedance (Ω) 100k R08600 10k R15170 1k R20130 100 R25080 10 1 1k 10k 100k Frequency (Hz) Handling Precautions Precautions for product storage AC Line Filters should be stored in normal working environments. While the chokes themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70% relative humidity. Atmospheres should be free of chlorine and sulfur bearing compounds. Temperature fluctuations should be minimized to avoid condensation on the parts. Avoid storage near strong magnetic fields, as this might magnetize the product. For optimized solderability, AC line filters stock should be used promptly and preferably within 6 months of receipt. Product temperature rise values The values listed for temperature rise are the result of self-heating in wires when the rated current (commercial frequency) is applied. When using the product, check and evaluate the value of the core temperature rise under actual operating conditions. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com AC Line Filters LF0031_SS28V-H-CH • 1/31/2020 53 4 AC Line Filters – Common Mode SS Coils, 28V/H-CH Series Export Control For customers in Japan For products that are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export. For customers outside Japan AC line filters should not be used or sold for the use in the development, production, stockpiling, or utilization of any conventional weapons, mass-destruction weapons (nuclear, chemical, biological weapons, or missiles), or any other weapons. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0031_SS28V-H-CH • 1/31/2020 5 AC Line Filters – Common Mode SS Coils, 28V/H-CH Series KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. When providing KEMET products and technologies contained herein to other countries, the customer must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the International Traffi c in Arms Regulations (ITAR), the US Export Administration Regulations (EAR) and the Japan Foreign Exchange and Foreign Trade Act. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0031_SS28V-H-CH • 1/31/2020 6