AC Line Filters
Common Mode SS Coils, 35V/H Series
Overview
Applications
The KEMET SS Coils, SS35V/H Type AC line filters are
offered in a wide variety of sizes and specifications.
• Consumer Electronics
• Common mode choke
Benefits
• Wide variety of sizes and specifications
• Inductances up to 30 mH
• Rated Currents up to 4.5 A
• DC Resistances as low as 0.06 Ω
Type
t]
ed
ent
(A)
5
0
5
0
5
0
5
DC resistance
Inductance
Temperature
Weight approx.(g)
(/line)
(mH)
rise(K)
V
H
max.
min.
max.
30
0.48
45
57.0
60.0
17
0.28
45
58.0
61.0
Part Number System
9
0.20
45
56.0
59.0
0.15
45
56.0
59.0
SS 8.2
35
V15
300
4.7
0.10
45
57.0
54.0
Series
Core Size (mm)
Core Orientation
Rated Current AC (A)
Inductance (mH) Minimum
3.3
0.08
50
55.0
52.0
SS
35 = 35.0 mm
V- = Vertical
xx = x.x A
xx0 = xx mH
2.2
0.06H- = Horizontal
50
53.0 0xx = x.x mH 50.0
Examples:
ing voltage: 2400VAC (2sec between lines)
15 = 1.5 A
e than 100M (between lines) • Thermal class: E (120˚C)
5 to T (T=120–temperature rise) • Inductance measurement condition: 1kHz, 1V, KC530
Examples:
300 = 30 mH
033 = 3.3 mH
30 max.
SS35H
One world. One KEMET
30±0.5
+1.5
–1.0
LF0034_SS35V-H • 2/3/2020
25
15
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
ø1.2
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
25±0.5
1
AC Line Filters – Common Mode SS Coils, 35V/H Series
Dimensions – Millimeters
SS35V
30 Maximum
30
30
25
15
4.0 +1.5/-1.0
21
15 ±0.5
15 ±0.5
26.5 Maximum
26.5 Maximum
25 ±0.5
25 ±0.5
35 Maximum
35 Maximum
25
4.0 ±1.0
21
21 ±0.5
21 ±0.5
37 Maximum
37 Maximum
30 ±0.5
30 ±0.5
37 Maximum
37 Maximum
15
4.0 ±1.0
2-Reinforcing
2-Reinforcing
terminal
terminal
30 Maximum
ø1.2 ø1.2
6 – ø1.2
6 – ø1.2
4.0 +1.5/-1.0
41 Maximum
41 Maximum
SS35H
Environmental Compliance
All KEMET AC Line Filters are RoHS Compliant.
Table 1 – Ratings & Part Number Reference
Part Number
SS35H-15300
SS35V-15300
SS35H-20170
SS35V-20170
SS35H-25090
SS35V-25090
SS35H-30082
SS35V-30082
SS35H-35047
SS35V-35047
SS35H-40033
SS35V-40033
SS35H-45022
SS35V-45022
Rated Current AC Inductance (mH) DC Resistance/ Temperature Rise Weight (g)
(A)
Minimum
Line (Ω) Maximum (K) Maximum
Approximate
1.5
1.5
2.0
2.0
2.5
2.5
3.0
3.0
3.5
3.5
4.0
4.0
4.5
4.5
30.0
30.0
17.0
17.0
9.0
9.0
8.2
8.2
4.7
4.7
3.3
3.3
2.2
2.2
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
0.48
0.48
0.28
0.28
0.20
0.20
0.15
0.15
0.10
0.10
0.08
0.08
0.06
0.06
45
45
45
45
45
45
45
45
45
45
50
50
50
50
57
60
58
61
56
59
56
59
54
57
52
55
50
53
LF0034_SS35V-H • 2/3/2020
2
• Rated voltage:250VAC • Withstanding voltage: 2400VAC (2sec between lines)
• Insulation resistance: at 500VDC, more than 100M (between lines) • Thermal class: E (120˚C)
• Operating temperature range (˚C): –25 to T (T=120–temperature rise) • Inductance measurement condition: 1kHz, 1V, KC530
Shape and Dimensions
SS35V
SS35H
2-Reinforcing
terminal
21±0.5
Withstanding Voltage
37 max.
30±0.5
SS35V/H
21
4.0±1.0
Rated Voltage
Item
25
ø1.2
37 max.
25±0.5
4.0 +1.5
–1.0
6—ø1.2
15
41 max.
Performance Characteristics
30 max.
AC Line Filters – Common Mode SS Coils, 35V/H Series
30
35 max.
250 VAC
15±0.5
2,400 VAC (2 seconds, between lines)
26.5 max.
Insulation Resistance
> 100 MΩ at 500 VDC (between lines)
Rated Current
AC Range
Numbering
System
1.5 – 4.5 A
[mm]
Rated Inductance Range
SS 35 V - 15 300
Inductance
Measurement
� �
� � � Condition
2.2 –
30.0 mH minimum
Thermal Class
E (120°C)
Rated current (15 stands for 1.5A)
Operating Temperature Range
Inductance
(300 stands
30mH)
−25°C
to +120°C (include
selffor
temperature
rise)
Series
Core size
1 kHz
Type (V: vertical, H: horizontal)
Frequency
Characteristics
Frequency
characteristic
1M 1
1M 1
6
3
6
3
20170
10K 1
100K 1
25090
6
3
30082
1K 1
100
10
Impedance ()
100K 1
Impedance ()
6
3
15300
6
3
1
6
3
1
6
3
1
1K
6
3
6
3
1K 1
100
10
3
6
1
10K
3
6
1
100K
3
6
1
1M
Frequency (MHz)
3
6
1
10M
3
30M
Handling Precautions
35047
10K 1
45022
6
3
40033
1
6
3
1
6
3
1
1K
3
6
1
10K
3
6
1
100K
3
6
1
1M
Frequency (MHz)
3
6
1
10M
3
30M
AC Line Filters
57
Precautions for product storage
AC Line Filters should be stored in normal working environments. While the chokes themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and
long term storage.
KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70%
relative humidity. Atmospheres should be free of chlorine and sulfur bearing compounds. Temperature fluctuations should
be minimized to avoid condensation on the parts. Avoid storage near strong magnetic fields, as this might magnetize the
product.
For optimized solderability, AC line filters stock should be used promptly and preferably within 6 months of receipt.
Product temperature rise values
The values listed for temperature rise are the result of self-heating in wires when the rated current (commercial frequency)
is applied.
When using the product, check and evaluate the value of the core temperature rise under actual operating conditions.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
LF0034_SS35V-H • 2/3/2020
3
AC Line Filters – Common Mode SS Coils, 35V/H Series
Export Control
For customers in Japan
For products that are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license
specified by the law is required for export.
For customers outside Japan
AC line filters should not be used or sold for the use in the development, production, stockpiling, or utilization of any
conventional weapons, mass-destruction weapons (nuclear, chemical, biological weapons, or missiles), or any other
weapons.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
LF0034_SS35V-H • 2/3/2020
4
AC Line Filters – Common Mode SS Coils, 35V/H Series
KEMET Electronics Corporation Sales Offices
For a complete list of our global sales offi ces, please visit www.kemet.com/sales.
Disclaimer
All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no
obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or
property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
When providing KEMET products and technologies contained herein to other countries, the customer must abide by the procedures and provisions stipulated in all
applicable export laws and regulations, including without limitation the International Traffi c in Arms Regulations (ITAR), the US Export Administration Regulations
(EAR) and the Japan Foreign Exchange and Foreign Trade Act.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
LF0034_SS35V-H • 2/3/2020
5