SS35V-40033

AC Line Filters Common Mode SS Coils, 35V/H Series Overview Applications The KEMET SS Coils, SS35V/H Type AC line filters are offered in a wide variety of sizes and specifications. • Consumer Electronics • Common mode choke Benefits • Wide variety of sizes and specifications • Inductances up to 30 mH • Rated Currents up to 4.5 A • DC Resistances as low as 0.06 Ω Type t] ed ent (A) 5 0 5 0 5 0 5 DC resistance Inductance Temperature Weight approx.(g) (/line) (mH) rise(K) V H max. min. max. 30 0.48 45 57.0 60.0 17 0.28 45 58.0 61.0 Part Number System 9 0.20 45 56.0 59.0 0.15 45 56.0 59.0 SS 8.2 35 V15 300 4.7 0.10 45 57.0 54.0 Series Core Size (mm) Core Orientation Rated Current AC (A) Inductance (mH) Minimum 3.3 0.08 50 55.0 52.0 SS 35 = 35.0 mm V- = Vertical xx = x.x A xx0 = xx mH 2.2 0.06H- = Horizontal 50 53.0 0xx = x.x mH 50.0 Examples: ing voltage: 2400VAC (2sec between lines) 15 = 1.5 A e than 100M (between lines) • Thermal class: E (120˚C)　 5 to T (T=120–temperature rise) • Inductance measurement condition: 1kHz, 1V, KC530 Examples: 300 = 30 mH 033 = 3.3 mH 30 max. SS35H One world. One KEMET 30±0.5 +1.5 –1.0 LF0034_SS35V-H • 2/3/2020 25 15 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard ø1.2 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 25±0.5 1 AC Line Filters – Common Mode SS Coils, 35V/H Series Dimensions – Millimeters SS35V 30 Maximum 30 30 25 15 4.0 +1.5/-1.0 21 15 ±0.5 15 ±0.5 26.5 Maximum 26.5 Maximum 25 ±0.5 25 ±0.5 35 Maximum 35 Maximum 25 4.0 ±1.0 21 21 ±0.5 21 ±0.5 37 Maximum 37 Maximum 30 ±0.5 30 ±0.5 37 Maximum 37 Maximum 15 4.0 ±1.0 2-Reinforcing 2-Reinforcing terminal terminal 30 Maximum ø1.2 ø1.2 6 – ø1.2 6 – ø1.2 4.0 +1.5/-1.0 41 Maximum 41 Maximum SS35H Environmental Compliance All KEMET AC Line Filters are RoHS Compliant. Table 1 – Ratings & Part Number Reference Part Number SS35H-15300 SS35V-15300 SS35H-20170 SS35V-20170 SS35H-25090 SS35V-25090 SS35H-30082 SS35V-30082 SS35H-35047 SS35V-35047 SS35H-40033 SS35V-40033 SS35H-45022 SS35V-45022 Rated Current AC Inductance (mH) DC Resistance/ Temperature Rise Weight (g) (A) Minimum Line (Ω) Maximum (K) Maximum Approximate 1.5 1.5 2.0 2.0 2.5 2.5 3.0 3.0 3.5 3.5 4.0 4.0 4.5 4.5 30.0 30.0 17.0 17.0 9.0 9.0 8.2 8.2 4.7 4.7 3.3 3.3 2.2 2.2 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 0.48 0.48 0.28 0.28 0.20 0.20 0.15 0.15 0.10 0.10 0.08 0.08 0.06 0.06 45 45 45 45 45 45 45 45 45 45 50 50 50 50 57 60 58 61 56 59 56 59 54 57 52 55 50 53 LF0034_SS35V-H • 2/3/2020 2 • Rated voltage:250VAC • Withstanding voltage: 2400VAC (2sec between lines) • Insulation resistance: at 500VDC, more than 100M (between lines) • Thermal class: E (120˚C)　 • Operating temperature range (˚C): –25 to T (T=120–temperature rise) • Inductance measurement condition: 1kHz, 1V, KC530 Shape and Dimensions SS35V SS35H 2-Reinforcing terminal 21±0.5 Withstanding Voltage 37 max. 30±0.5 SS35V/H 21 4.0±1.0 Rated Voltage Item 25 ø1.2 37 max. 25±0.5 4.0 +1.5 –1.0 6—ø1.2 15 41 max. Performance Characteristics 30 max. AC Line Filters – Common Mode SS Coils, 35V/H Series 30 35 max. 250 VAC 15±0.5 2,400 VAC (2 seconds, between lines) 26.5 max. Insulation Resistance > 100 MΩ at 500 VDC (between lines) Rated Current AC Range Numbering System 1.5 – 4.5 A [mm] Rated Inductance Range SS 35 V - 15 300 Inductance Measurement � � � � � Condition 2.2 – 30.0 mH minimum Thermal Class E (120°C)  Rated current (15 stands for 1.5A) Operating Temperature Range  Inductance (300 stands 30mH) −25°C to +120°C (include selffor temperature rise) Series  Core size 1 kHz  Type (V: vertical, H: horizontal) Frequency Characteristics Frequency characteristic 1M 1 1M 1 6 3 6 3 20170 10K 1 100K 1 25090 6 3 30082 1K 1 100 10 Impedance () 100K 1 Impedance () 6 3 15300 6 3 1 6 3 1 6 3 1 1K 6 3 6 3 1K 1 100 10 3 6 1 10K 3 6 1 100K 3 6 1 1M Frequency (MHz) 3 6 1 10M 3 30M Handling Precautions 35047 10K 1 45022 6 3 40033 1 6 3 1 6 3 1 1K 3 6 1 10K 3 6 1 100K 3 6 1 1M Frequency (MHz) 3 6 1 10M 3 30M AC Line Filters 57 Precautions for product storage AC Line Filters should be stored in normal working environments. While the chokes themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70% relative humidity. Atmospheres should be free of chlorine and sulfur bearing compounds. Temperature fluctuations should be minimized to avoid condensation on the parts. Avoid storage near strong magnetic fields, as this might magnetize the product. For optimized solderability, AC line filters stock should be used promptly and preferably within 6 months of receipt. Product temperature rise values The values listed for temperature rise are the result of self-heating in wires when the rated current (commercial frequency) is applied. When using the product, check and evaluate the value of the core temperature rise under actual operating conditions. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0034_SS35V-H • 2/3/2020 3 AC Line Filters – Common Mode SS Coils, 35V/H Series Export Control For customers in Japan For products that are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export. For customers outside Japan AC line filters should not be used or sold for the use in the development, production, stockpiling, or utilization of any conventional weapons, mass-destruction weapons (nuclear, chemical, biological weapons, or missiles), or any other weapons. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0034_SS35V-H • 2/3/2020 4 AC Line Filters – Common Mode SS Coils, 35V/H Series KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. When providing KEMET products and technologies contained herein to other countries, the customer must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the International Traffi c in Arms Regulations (ITAR), the US Export Administration Regulations (EAR) and the Japan Foreign Exchange and Foreign Trade Act. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0034_SS35V-H • 2/3/2020 5