SSR10H-14140

AC Line Filters Common Mode SSR Coils, 10V/H Series, High Impedance Type Overview Applications The KEMET SSR coils are common mode chokes with a wide variety of characteristics. These gear type coils are designed with our proprietary high permeability ferrite S15H cores and are useful in various noise countermeasure fields. • Audio-visual equipment • Office automation equipment • Digital appliances • Power supplies Benefits • Proprietary S15H ferrite material • High permeability • Large inductance due to non-divided bobbin • Compact size, low profile, and lightweight • Operating temperature range from −40°C to +120°C • UL 94 V–0 flame retardant rated base and bobbin Part Number System SSR 10 V- 04 910 Series Core Size Code Core Orientation and Bobbin Type Rated Current (A) Inductance (mH) Minimum SSR 10 H = Horizontal, bobbin without sectional winding structure V = Vertical, bobbin without sectional winding structure 0x = 0.x A xx = x.x A xxx = xx.x mH 0xx = x.x mH Examples: 04 = 0.4 A 13 = 1.3 A Examples: 910 = 91.0 mH 016 = 1.6 mH Built Into Tomorrow © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0042_SSR10V-H • 9/26/2023 1 AC Line Filters – Common Mode SSR Coils, 10V/H Series, High Impedance Type Magnetic Permeability of Ferrite Material In order to achieve most efficient noise reduction, it is important to select the material according to the target frequency band. Depending on its magnetic permeability, a particular ferrite material will be effective in a certain frequency band. A schematic representation of the relationship between the magnetic permeability of each material and the corresponding effective band range is shown in Figure 1. Materials with higher magnetic permeability are effective in the lower frequency range, while those with lower magnetic permeability are effective in the higher frequency range. Thus, Mn-Zn products are mainly used for reducing conduction noise, while Ni-Zn products are commonly used for radiation noise countermeasures. The effective frequency range varies depending on core shape, size and number of windings. This frequency dependence of the magnetic permeability as shown in the figure serves for reference purposes only and it should be tested on the actual device to determine its effectiveness. S18H, S15H, 10H, 7H, 5H, 1400L and 700L are KEMET’s proprietary ferrite material names. Other materials can also be available on request. Figure 1 - Relationship between the magnetic permeability of each material and its effective frequency range 20,000 Higher magnetic permeability: Higher noise suppression effect in the lower frequency range Mn-Zn Series Magnetic Permeability S18H S15H 10H 10,000 Lower magnetic permeability: Higher noise suppression effect in the higher frequency range 7H 5H Ni-Zn Series 0 10 kHz 1400L 700L 100 kHz 1 MHz 10 MHz 100 MHz 1 GHz Effective Frequency Range © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0042_SSR10V-H • 9/26/2023 2 AC Line Filters – Common Mode SSR Coils, 10V/H Series, High Impedance Type Dimensions – Millimeters SSR10H 13.0 17.0 18.0 Maximum N2 N1 N2 3.5±0.5 10±0.5 17±0.5 3.5±0.5 φ0.7 φ0.7 13±0.5 13.5 Maximum 21.0 Maximum 13.0 Maximum N1 22.0 Maximum 10.0 23.5 Maximum 12.0 SSR10V 12±0.5 Environmental Compliance All KEMET AC Line Filters are RoHS Compliant. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0042_SSR10V-H • 9/26/2023 3 AC Line Filters – Common Mode SSR Coils, 10V/H Series, High Impedance Type Performance Characteristics Item Performance Characteristics Rated Voltage 250 VAC Withstanding Voltage 2,400 VAC (2 seconds, between lines) Insulation Resistance > 100 MΩ at 500 VDC (between lines) Rated Current Range 0.4 – 3.0 A Rated Inductance Range 1.6 – 91.0 mH minimum Inductance Measurement Condition 10 kHz Thermal Class E (120°C) Operating Temperature Range −40°C to +120°C (include self temperature rise) Table 1 – Ratings & Part Number Reference Part Number SSR10H-04910 SSR10V-04910 SSR10H-05595 SSR10V-05595 SSR10H-06475 SSR10V-06475 SSR10H-07330 SSR10V-07330 SSR10H-08220 SSR10V-08220 SSR10H-10170 SSR10V-10170 SSR10H-11140 SSR10V-11140 SSR10H-13097 SSR10V-13097 SSR10H-14140 SSR10H-17058 SSR10V-17058 SSR10V-21038 SSR10H-22034 SSR10V-22034 SSR10H-30016 SSR10V-30016 Rated Current Inductance (mH) (A) Minimum 0.4 0.4 0.5 0.5 0.6 0.6 0.7 0.7 0.8 0.8 1.0 1.0 1.1 1.1 1.3 1.3 1.4 1.7 1.7 2.1 2.2 2.2 3.0 3.0 DC Resistance/ Line (Ω) Maximum Temperature Rise (K) Maximum Wire Diameter (mm) Weight (g) Approximate 2.80 2.80 1.70 1.70 1.30 1.30 0.90 0.90 0.65 0.65 0.48 0.48 0.37 0.37 0.27 0.27 0.40 0.18 0.18 0.15 0.11 0.11 0.06 0.06 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 80 60 60 65 60 60 65 65 0.20 0.20 0.23 0.23 0.25 0.25 0.28 0.28 0.30 0.30 0.32 0.32 0.35 0.35 0.37 0.37 0.35 0.40 0.40 0.40 0.45 0.45 0.50 0.50 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 91.0 91.0 59.5 59.5 47.5 47.5 33.0 33.0 22.0 22.0 17.0 17.0 14.0 14.0 9.7 9.7 14.0 5.8 5.8 3.8 3.4 3.4 1.6 1.6 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0042_SSR10V-H • 9/26/2023 4 AC Line Filters – Common Mode SSR Coils, 10V/H Series, High Impedance Type Frequency Characteristics 1M SSR10V/H-04910 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 1k 100 10 1 1 1k 1M 10k 100k Frequency (Hz) 1M 10M 30M 1k SSR10V/H-06475 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 10M 30M 1M 10M 30M 1M 10M 30M 1M 10M 30M SSR10V/H-07330 100 10k 100k Frequency (Hz) 1M 10M 30M 1k SSR10V/H-08220 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 1M 1k 100k 1k 100 10 10k 100k Frequency (Hz) SSR10V/H-10170 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M 1k SSR10V/H-11140 1M 100k 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k Frequency (Hz) 1 1k 1M 10k 10 1 1M SSR10V/H-05595 1k 100 10 10k 100k Frequency (Hz) SSR10V/H-13097 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 1k 10k 100k Frequency (Hz) LF0042_SSR10V-H • 9/26/2023 5 AC Line Filters – Common Mode SSR Coils, 10V/H Series, High Impedance Type Frequency Characteristics cont. 1M SSR10H-14140 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 1k 100 10 1 1 1k 1M 10k 100k Frequency (Hz) 1M 10M 30M 1k SSR10V-21038 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 10k 100k Frequency (Hz) 1M 10M 30M 1M 10M 30M SSR10V/H-22034 1k 100 10 1 1 1k 1M SSR10V/H-17058 10k 100k Frequency (Hz) 1M 10M 30M 1M 10M 30M 1k 10k 100k Frequency (Hz) SSR10V/H-30016 Impedance (Ω) 100k 10k 1k 100 10 1 1k 10k 100k Frequency (Hz) Packaging Type Packaging Type Pieces Per Box SSR10H SSR10V Tray 300 600 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0042_SSR10V-H • 9/26/2023 6 AC Line Filters – Common Mode SSR Coils, 10V/H Series, High Impedance Type Handling Precautions Precautions for product storage AC Line Filters should be stored in normal working environments. While the chokes themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70% relative humidity. Atmospheres should be free of chlorine and sulfur bearing compounds. Temperature fluctuations should be minimized to avoid condensation on the parts. Avoid storage near strong magnetic fields, as this might magnetize the product. For optimized solderability, AC line filters stock should be used promptly and preferably within 6 months of receipt. Product temperature rise values The values listed for temperature rise are the result of self-heating in wires when the rated current (commercial frequency) is applied. When using the product, check and evaluate the value of the core temperature rise under actual operating conditions. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0042_SSR10V-H • 9/26/2023 7 AC Line Filters – Common Mode SSR Coils, 10V/H Series, High Impedance Type KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer YAGEO Corporation and its affi liates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space fl ight. All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. When providing KEMET products and technologies contained herein to other countries, the customer must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the International Traffi c in Arms Regulations (ITAR), the US Export Administration Regulations (EAR) and the Japan Foreign Exchange and Foreign Trade Act. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0042_SSR10V-H • 9/26/2023 8