AC Line Filters
Common Mode SSR Coils, 21NV-M/NH-M Series,
High Impedance Type
Overview
Applications
The KEMET SSR coils are common mode chokes with a
wide variety of characteristics. These gear type coils are
designed with our proprietary high permeability ferrite
S15H cores and are useful in various noise countermeasure
fields.
• Audio-visual equipment
• Office automation equipment
• Digital appliances
• Power supplies
Benefits
• Proprietary S15H ferrite material
• High permeability
• Higher performance due to additional windings
• Large inductance due to non-divided bobbin
• Compact size, low profile, and lightweight
• Operating temperature range from −40°C to +120°C
• UL 94 V–0 flame retardant rated base and bobbin
Part Number System
SSR
21N
V-M
03
1900
Series
Core Size Code
Core Orientation and Bobbin Type
Rated Current
(A)
Inductance (mH)
Minimum
SSR
21N
H-M = Horizontal, bobbin without
sectional winding structure
V-M = Vertical, bobbin without
sectional winding structure
0x = 0.x A
xx = x.x A
xxx0 = xxx mH
xxx = xx.x mH
Examples:
03 = 0.3 A
13 = 1.3 A
Examples:
1900 = 190 mH
064 = 6.4 mH
Built Into Tomorrow
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
LF0046_SSR21NV-M_NH-M • 9/26/2023
1
AC Line Filters – Common Mode SSR Coils, 21NV-M/NH-M Series, High Impedance Type
Magnetic Permeability of Ferrite Material
In order to achieve most efficient noise reduction, it is important to select the material according to the target frequency
band.
Depending on its magnetic permeability, a particular ferrite material will be effective in a certain frequency band.
A schematic representation of the relationship between the magnetic permeability of each material and the corresponding
effective band range is shown in Figure 1. Materials with higher magnetic permeability are effective in the lower frequency
range, while those with lower magnetic permeability are effective in the higher frequency range. Thus, Mn-Zn products are
mainly used for reducing conduction noise, while Ni-Zn products are commonly used for radiation noise countermeasures.
The effective frequency range varies depending on core shape, size and number of windings. This frequency dependence
of the magnetic permeability as shown in the figure serves for reference purposes only and it should be tested on the actual
device to determine its effectiveness.
S18H, S15H, 10H, 7H, 5H, 1400L and 700L are KEMET’s proprietary ferrite material names.
Other materials can also be available on request.
Figure 1 - Relationship between the magnetic permeability of each material and its effective frequency range
20,000
Higher magnetic permeability:
Higher noise suppression effect
in the lower frequency range
Mn-Zn Series
Magnetic Permeability
S18H
S15H
10H
10,000
Lower magnetic permeability:
Higher noise suppression effect
in the higher frequency range
7H
5H
Ni-Zn Series
0
10 kHz
1400L
700L
100 kHz
1 MHz
10 MHz
100 MHz
1 GHz
Effective Frequency Range
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
LF0046_SSR21NV-M_NH-M • 9/26/2023
2
AC Line Filters – Common Mode SSR Coils, 21NV-M/NH-M Series, High Impedance Type
Dimensions – Millimeters
SSR21NH-M
13.0
23.0 Maximum
N2
10.0
N1
N2
3.5±0.5
10±0.5
10±0.5
3.5±0.5
φ0.8
φ0.8
13±0.5
14.5 Maximum
27.0 Maximum
N1
23.0 Maximum
10.0
16.0 Maximum
22.0 Maximum
18.5
SSR21NV-M
18.5±0.5
Environmental Compliance
All KEMET AC line filters are RoHS Compliant.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
LF0046_SSR21NV-M_NH-M • 9/26/2023
3
AC Line Filters – Common Mode SSR Coils, 21NV-M/NH-M Series, High Impedance Type
Performance Characteristics
Item
Performance Characteristics
Rated Voltage
250 VAC
Withstanding Voltage
2,400 VAC (2 seconds, between lines)
Insulation Resistance
> 100 MΩ at 500 VDC (between lines)
Rated Current AC Range
0.3 – 3.5 A
Rated Inductance Range
4.7 – 190.0 mH minimum
Inductance Measurement Condition
10 kHz
Thermal Class
E (120°C)
Operating Temperature Range
−40°C to +120°C (include self temperature rise)
Table 1 – Ratings & Part Number Reference
Part Number
SSR21NH-M031900
SSR21NV-M031900
SSR21NH-M041500
SSR21NV-M041500
SSR21NH-M051350
SSR21NV-M051350
SSR21NH-M061200
SSR21NV-M061200
SSR21NH-M07890
SSR21NV-M07890
SSR21NH-M08680
SSR21NV-M08680
SSR21NH-M10475
SSR21NV-M10475
SSR21NH-M12345
SSR21NV-M12345
SSR21NH-M15220
SSR21NV-M15220
SSR21NH-M18164
SSR21NV-M18164
SSR21NH-M20125
SSR21NV-M20125
SSR21NH-M25103
SSR21NV-M25103
SSR21NH-M30064
SSR21NV-M30064
SSR21NV-M35047
Rated Current Inductance (mH)
(A)
Minimum
0.3
0.3
0.4
0.4
0.5
0.5
0.6
0.6
0.7
0.7
0.8
0.8
1.0
1.0
1.2
1.2
1.5
1.5
1.8
1.8
2.0
2.0
2.5
2.5
3.0
3.0
3.5
DC Resistance/
Line (Ω)
Maximum
Temperature
Rise (K)
Maximum
Wire Diameter
(mm)
Weight (g)
Approximate
2.90
2.90
2.00
2.00
1.90
1.90
1.50
1.50
1.05
1.05
0.80
0.80
0.58
0.58
0.43
0.43
0.26
0.26
0.21
0.21
0.16
0.16
0.12
0.12
0.08
0.08
0.06
45
45
45
45
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
55
0.20
0.20
0.23
0.23
0.23
0.23
0.25
0.25
0.28
0.28
0.30
0.30
0.32
0.32
0.35
0.35
0.40
0.40
0.40
0.40
0.45
0.45
0.50
0.50
0.55
0.55
0.60
13.0
14.5
13.0
14.5
13.0
14.5
13.0
14.5
13.0
14.5
13.0
14.5
13.0
14.5
13.0
14.5
13.0
14.5
13.0
14.5
13.0
14.5
13.0
14.5
13.0
14.5
14.5
190.0
190.0
150.0
150.0
135.0
135.0
120.0
120.0
89.0
89.0
68.0
68.0
47.5
47.5
34.5
34.5
22.0
22.0
16.4
16.4
12.5
12.5
10.3
10.3
6.4
6.4
4.7
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
LF0046_SSR21NV-M_NH-M • 9/26/2023
4
AC Line Filters – Common Mode SSR Coils, 21NV-M/NH-M Series, High Impedance Type
Frequency Characteristics
1M
SSR21NV/NH-M031900
1M
10k
10k
Impedance (Ω)
100k
Impedance (Ω)
100k
1k
100
10
1k
100
10
1
1
1k
1M
10k
100k
Frequency (Hz)
1M
10M
30M
1k
SSR21NV/NH-M051350
1M
10k
10k
Impedance (Ω)
100k
Impedance (Ω)
100k
1k
100
10
10M
30M
1M
10M
30M
1M
10M
30M
1M
10M
30M
SSR21NV/NH-M061200
100
10k
100k
Frequency (Hz)
1M
10M
30M
1k
SSR21NV/NH-M07890
1M
10k
10k
Impedance (Ω)
100k
Impedance (Ω)
1M
1k
100k
1k
100
10
10k
100k
Frequency (Hz)
SSR21NV/NH-M08680
1k
100
10
1
1
1k
10k
100k
Frequency (Hz)
1M
10M
30M
1k
SSR21NV/NH-M10475
1M
100k
10k
10k
Impedance (Ω)
100k
Impedance (Ω)
100k
Frequency (Hz)
1
1k
1M
10k
10
1
1M
SSR21NV/NH-M041500
1k
100
10
10k
100k
Frequency (Hz)
SSR21NV/NH-M12345
1k
100
10
1
1
1k
10k
100k
Frequency (Hz)
1M
10M
30M
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
1k
10k
100k
Frequency (Hz)
LF0046_SSR21NV-M_NH-M • 9/26/2023
5
AC Line Filters – Common Mode SSR Coils, 21NV-M/NH-M Series, High Impedance Type
Frequency Characteristics cont.
1M
SSR21NV/NH-M15220
1M
10k
10k
Impedance (Ω)
100k
Impedance (Ω)
100k
1k
100
10
1k
100
10
1
1
1k
1M
10k
100k
Frequency (Hz)
1M
10M
30M
1k
SSR21NV/NH-M20125
1M
10k
10k
Impedance (Ω)
100k
Impedance (Ω)
100k
1k
100
10
100k
Frequency (Hz)
1M
10M
30M
1M
10M
30M
1M
10M
30M
SSR21NV/NH-M25103
1k
100
1
1k
10k
100k
Frequency (Hz)
1M
10M
30M
1k
SSR21NV/NH-M30064
1M
100k
10k
10k
Impedance (Ω)
100k
Impedance (Ω)
10k
10
1
1M
SSR21NV/NH-M18164
1k
100
10k
100k
Frequency (Hz)
SSR21NV-M35047
1k
100
10
10
1
1
1k
10k
100k
Frequency (Hz)
1M
10M
30M
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
1k
10k
100k
Frequency (Hz)
LF0046_SSR21NV-M_NH-M • 9/26/2023
6
AC Line Filters – Common Mode SSR Coils, 21NV-M/NH-M Series, High Impedance Type
Packaging
Type
Packaging Type
Pieces Per Box
SSR21NH-M
SSR21NV-M
Tray
420
450
Handling Precautions
Precautions for product storage
AC Line Filters should be stored in normal working environments. While the chokes themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and
long term storage.
KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70%
relative humidity. Atmospheres should be free of chlorine and sulfur bearing compounds. Temperature fluctuations should
be minimized to avoid condensation on the parts. Avoid storage near strong magnetic fields, as this might magnetize the
product.
For optimized solderability, AC line filters stock should be used promptly and preferably within 6 months of receipt.
Product temperature rise values
The values listed for temperature rise are the result of self-heating in wires when the rated current (commercial frequency)
is applied.
When using the product, check and evaluate the value of the core temperature rise under actual operating conditions.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
LF0046_SSR21NV-M_NH-M • 9/26/2023
7
AC Line Filters – Common Mode SSR Coils, 21NV-M/NH-M Series, High Impedance Type
KEMET Electronics Corporation Sales Offices
For a complete list of our global sales offi ces, please visit www.kemet.com/sales.
Disclaimer
YAGEO Corporation and its affi liates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space fl ight.
All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no
obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or
property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other
measures may not be required.
When providing KEMET products and technologies contained herein to other countries, the customer must abide by the procedures and provisions stipulated in all
applicable export laws and regulations, including without limitation the International Traffi c in Arms Regulations (ITAR), the US Export Administration Regulations
(EAR) and the Japan Foreign Exchange and Foreign Trade Act.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
LF0046_SSR21NV-M_NH-M • 9/26/2023
8