Tantalum Through-Hole Capacitors – Molded Axial
T322 (CX01) & T323 (CX05)
Overview
The T322 and T323 (CX01 and CX05) capacitors are a
complete line of extended range molded solid tantalum
capacitors designed specifically for high-speed automatic
insertion applications. These capacitors offer an
extremely high capacitance-to-volume ratio while still
maintaining excellent performance characteristics.
Supplied in six axial lead tubular case sizes, these
capacitors are idealy suited for use in printed wiring
boards and all applications requiring a high degree of
packaging density. These capacitors can be supplied
in bulk packaging or lead-taped on reels. The T322/
T323 capacitor dimensions and tight lead wire-to-body
concentricity permit installation by the same automatic
insertion equipment used for diodes and resistors.
These capacitors are available in working voltages of
2, 4, 6, 10, 15, 20, 25, 35, and 50 volts. The operating
temperature ranges from -55°C to +85°C at full rated
voltage and with 2/3 85°C rated voltage at 125°C.
The gold-colored epoxy permits laser marking with
outstanding permanency and legibility. T323 capacitors
are qualified under MIL-PRF-49137/1 and 5 as Military
Style CX01 and CX05.
Benefits
Applications
• Taped and reeled per EIA Specification RS–296
• Laser-marked case
• Qualified to MIL–PRF–49137/1 and 5
(CX01 and CX05 Style)
• Capacitance values of 0.1 to 330 μF
• Tolerances of ±5%, ±10% and ±20%
(M and K only tolerances available for T323 Series)
• Voltage rating of 2 – 50 VDC
• Operating temperature range of −55°C to +85°C
• Case sizes: A, B, C, D, E, F
Typical applications include decoupling, blocking, bypassing
and filtering in commercial computers, data processing,
communications, and other electronic equipment. This
product is well-suited for decoupling required by high
speed computers due to its low ESR/impedance at high
frequencies.
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
One world. One KEMET
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2039_T322_AXIAL_T323 • 2/24/2020
1
Tantalum Through-Hole Capacitors – Molded Axial
T322 (CX01) & T323 (CX05)
Ordering Information
T
32X
Capacitor
Class
Series
T=
Tantalum
A
105
M
035
Case Capacitance Code Capacitance Rated Voltage
Size
(pF)
Tolerance
(VDC)
Axial molded polar
solid tantalum.
Insert appropriate
number to replace
letter "X" = 322
or 323 (CX01 or
CX05).
A
B
C
D
E
F
First two digits
represent
significant
figures. Third digit
specifies number
of zeros to follow.
J = ±5%*
K = ±10%
M = ±20%
002 = 2
004 = 4
006 = 6
010 = 10
015 = 15
020 = 20
025 = 25
035 = 35
050 = 50
A
T
Failure Rate/
Military Product
Termination
Finish
Not Applicable
S = Standard
(solder-coated
nickel)
T = 100% tin
(Sn)- plated
Packaging
Blank = Bulk
7200 = Reel
* J Tolerance available in T322 series only
MIL–PRF–49137/1/5 (CX01 and CX05 Style)
CX
05
D
475
K
Capacitor Class
Series
Rated Voltage
(VDC)
Capacitance
Code (pF)
Capacitance
Tolerance
CX = MIL-PRF
01 = T323
05 = T323
D=6
F = 10
H = 15
J = 20
K = 25
M = 35
N = 50
First two digits
K = ±10%
represent significant M = ±20%
figures. Third digit
specifies number of
zeros to follow.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2039_T322_AXIAL_T323 • 2/24/2020
2
Tantalum Through-Hole Capacitors – Molded Axial
T322 (CX01) & T323 (CX05)
Performance Characteristics
Item
Performance Characteristics
Operating Temperature
−55°C to 125°C
Rated Capacitance Range
0.1 – 330 μF at 120 Hz/25°C
Capacitance Tolerance
J Tolerance (5%), K Tolerance (10%), M Tolerance (20%)
Rated Voltage Range
2 – 50 V
DF (120 Hz at 25°C)
Refer to Part Number Electrical Specification Table
ESR and Impedance (100 kHz at 25°C)
Refer to Part Number Electrical Specification Table (for reference only)
Refer to Part Number Electrical Specification Table
(rated voltage up to +85°C and 2/3 of rated voltage applied at 125°C)
Leakage Current
Dimensions – Inches (Millimeters)
Metric will govern
SIDE VIEW
1.50±0.250
(38.10±6.35)
END VIEW
L
1.50±0.250
(38.10±6.35)
D
W
Case Size
D Maximum
L Maximum
W
A
0.095 (2.41)
0.260 (6.60)
0.020 (0.51)
B
0.110 (2.79)
0.290 (7.37)
0.020 (0.51)
C
0.180 (4.57)
0.345 (8.76)
0.020 (0.51)
D
0.180 (4.57)
0.420 (10.67)
0.020 (0.51)
E
0.280 (7.11)
0.530 (13.46)
0.025 (0.64)
F
0.300 (7.62)
0.710 (18.03)
0.025 (0.64)
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2039_T322_AXIAL_T323 • 2/24/2020
3
Tantalum Through-Hole Capacitors – Molded Axial
T322 (CX01) & T323 (CX05)
Table 1 – Ratings & Part Number Reference
Rated
Voltage
Rated
Cap
(V) 85°C
µF
2
2
2
2
2
2
2
2
2
2
2
2
2
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6.8
8.2
10.0
12.0
15.0
18.0
22.0
27.0
33.0
39.0
47.0
56.0
68.0
4.7
5.6
6.8
8.2
10.0
12.0
15.0
18.0
22.0
27.0
33.0
39.0
47.0
56.0
68.0
3.3
3.9
4.7
4.7
4.7
5.6
5.6
5.6
6.8
6.8
6.8
8.2
8.2
8.2
10.0
10.0
10.0
12.0
12.0
12.0
15.0
15.0
15.0
18.0
22.0
27.0
33.0
33.0
(V) 85°C
µF
Rated Voltage
Rated Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
A
A
A
B
B
B
B
B
B
C
C
C
C
A
A
A
B
B
B
B
B
B
C
C
C
C
D
D
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
C
C
C
C
C
(See below for
part options)
T322A685(1)002A(2)
T322A825(1)002A(2)
T322A106(1)002A(2)
T322B126(1)002A(2)
T322B156(1)002A(2)
T322B186(1)002A(2)
T322B226(1)002A(2)
T322B276(1)002A(2)
T322B336(1)002A(2)
T322C396(1)002A(2)
T322C476(1)002A(2)
T322C566(1)002A(2)
T322C686(1)002A(2)
T322A475(1)004A(2)
T322A565(1)004A(2)
T322A685(1)002A(2)
T322B825(1)004A(2)
T322B106(1)004A(2)
T322B126(1)004A(2)
T322B156(1)004A(2)
T322B186(1)004A(2)
T322B226(1)004A(2)
T322C276(1)004A(2)
T322C336(1)004A(2)
T322C396(1)004A(2)
T322C476(1)004A(2)
T322D566(1)004A(2)
T322D686(1)004A(2)
T322A335(1)006A(2)
T322A395(1)006A(2)
T322A475J006A(2)
T322A475K006A(2)
T322A475M006A(2)
T322B565J006A(2)
T322B565K006A(2)
T322B565M006A(2)
T322B685J006A(2)
T322B685K006A(2)
T322B685M006A(2)
T322B825J006A(2)
T322B825K006A(2)
T322B825M006A(2)
T322B106J006A(2)
T322B106K006A(2)
T322B106M006A(2)
T322B126J006A(2)
T322B126K006A(2)
T322B126M006A(2)
T322B156J006A(2)
T322B156K006A(2)
T322B156M006A(2)
T322C186(1)006A(2)
T322C226(1)006A(2)
T322C276(1)006A(2)
T322C336J006A(2)
T322C336K006A(2)
(see below for
part options)
µA at 25°C
Max/5 Minimum
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.8
0.9
1.1
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.7
0.9
1.1
1.2
1.5
1.8
2.2
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.6
0.6
0.7
0.7
0.7
0.9
1.1
1.3
1.5
1.5
µA at 25°C
Max/5 Minimum
% at 25°C
120 Hz Maximum
10
10
10
10
10
10
10
10
10
10
10
10
10
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
% at 25°C
120 Hz Maximum
KEMET Part Number
DC
Leakage
DF
Case Code/
Case Size
CX01 & CX05 Capacitors per
MIL–PRF–49137/1 & 5
Military Part Number
KEMET Part Number
CX05D475K
CX05D475M
T323A475K006A(2)
T323A475M006A(2)
CX01D565K
CX01D565M
T323B565K006A(2)
T323B565M006A(2)
CX01D685K
CX01D685M
T323B685K006A(2)
T323B685M006A(2)
CX01D825K
CX01D825M
T323B825K006A(2)
T323B825M006A(2)
CX01D106K
CX01D106M
T323B106K006A(2)
T323B106M006A(2)
CX01D126K
CX01D126M
T323B126K006A(2)
T323B126M006A(2)
CX05D156K
CX05D156M
T323B156K006A(2)
T323B156M006A(2)
CX05D336K
T323C336K006A(2)
Military Part Number
KEMET Part Number
CX01 & CX05 Capacitors per
MIL–PRF–49137/1 & 5
(1) To complete KEMET part number, insert M for ±20%, K for ±10% or J for 5%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, S = Standard Solder coated (SnPb 5% Pb minimum).
Designates termination finish.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2039_T322_AXIAL_T323 • 2/24/2020
4
Tantalum Through-Hole Capacitors – Molded Axial
T322 (CX01) & T323 (CX05)
Table 1 – Ratings & Part Number Reference cont.
Rated
Voltage
Rated
Cap
(V) 85°C
µF
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
15
15
33.0
39.0
47.0
47.0
47.0
56.0
68.0
82.0
100.0
120.0
150.0
180.0
220.0
270.0
330.0
2.2
2.7
3.3
3.3
3.3
3.9
4.7
5.6
6.8
8.2
10.0
10.0
10.0
12.0
15.0
18.0
22.0
22.0
22.0
27.0
27.0
27.0
33.0
33.0
33.0
39.0
39.0
39.0
47.0
47.0
47.0
56.0
68.0
82.0
100.0
120.0
150.0
180.0
220.0
1.5
1.8
(V) 85°C
µF
Rated Voltage
Rated Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
C
D
D
D
D
D
D
E
E
E
E
E
E
F
F
A
A
A
A
A
B
B
B
B
B
B
B
B
C
C
C
C
C
C
D
D
D
D
D
D
D
D
D
D
D
D
E
E
E
E
E
E
F
F
A
A
(See below for
part options)
T322C336M006A(2)
T322D396(1)006A(2)
T322D476J006A(2)
T322D476K006A(2)
T322D476M006A(2)
T322D566(1)006A(2)
T322D686(1)006A(2)
T322E826(1)006A(2)
T322E107(1)006A(2)
T322E127(1)006A(2)
T322E157(1)006A(2)
T322E187(1)006A(2)
T322E227(1)006A(2)
T322F277(1)006A(2)
T322F337(1)006A(2)
T322A225(1)010A(2)
T322A275(1)010A(2)
T322A335J010A(2)
T322A335K010A(2)
T322A335M010A(2)
T322B395(1)010A(2)
T322B475(1)010A(2)
T322B565(1)010A(2)
T322B685(1)010A(2)
T322B825(1)010A(2)
T322B106J010A(2)
T322B106K010A(2)
T322B106M010A(2)
T322C126(1)010A(2)
T322C156(1)010A(2)
T322C186(1)010A(2)
T322C226J010A(2)
T322C226K010A(2)
T322C226M010A(2)
T322D276J010A(2)
T322D276K010A(2)
T322D276M010A(2)
T322D336J010A(2)
T322D336K010A(2)
T322D336M010A(2)
T322D396J010A(2)
T322D396K010A(2)
T322D396M010A(2)
T322D476J010A(2)
T322D476K010A(2)
T322D476M010A(2)
T322E566(1)010A(2)
T322E686(1)010A(2)
T322E826(1)010A(2)
T322E107(1)010A(2)
T322E127(1)010A(2)
T322E157(1)010A(2)
T322F187(1)010A(2)
T322F227(1)010A(2)
T322A155(1)015A(2)
T322A185(1)015A(2)
(see below for
part options)
µA at 25°C
Max/5 Minimum
1.5
1.9
2.3
2.3
2.3
2.7
3.3
3.9
4.8
5.0
5.0
8.6
10.0
10.0
10.0
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.7
0.8
0.8
0.8
1.0
1.2
1.4
1.5
1.5
1.5
2.2
2.2
2.2
2.6
2.6
2.6
3.1
3.1
3.1
3.8
3.8
3.8
4.4
5.0
5.0
8.0
9.6
10.0
10.0
10.0
0.5
0.5
µA at 25°C
Max/5 Minimum
% at 25°C
120 Hz Maximum
6
6
6
6
6
6
6
8
8
8
8
8
8
8
8
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
4
6
6
6
6
6
6
6
6
8
8
8
8
8
8
4
4
% at 25°C
120 Hz Maximum
KEMET Part Number
DC
Leakage
DF
Case Code/
Case Size
CX01 & CX05 Capacitors per
MIL–PRF–49137/1 & 5
Military Part Number
KEMET Part Number
CX05D336M
T323C336M006A(2)
CX05D476K
CX05D476M
T323D476K006A(2)
T323D476M006A(2)
CX05F335K
CX05F335M
T323A335K010A(2)
T323A335M010A(2)
CX05F106K
CX05F106M
T323B106K010A(2)
T323B106M010A(2)
CX05F226K
CX05F226M
T323C226K010A(2)
T323C226M010A(2)
CX05F276K
CX05F276M
T323D276K010A(2)
T323D276M010A(2)
CX05F336K
CX05F336M
T323D336K010A(2)
T323D336M010A(2)
CX05F396K
CX05F396M
T323D396K010A(2)
T323D396M010A(2)
CX05F476K
CX05F476M
T323D476K010A(2)
T323D476M010A(2)
Military Part Number
KEMET Part Number
CX01 & CX05 Capacitors per
MIL–PRF–49137/1 & 5
(1) To complete KEMET part number, insert M for ±20%, K for ±10% or J for 5%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, S = Standard Solder coated (SnPb 5% Pb minimum).
Designates termination finish.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2039_T322_AXIAL_T323 • 2/24/2020
5
Tantalum Through-Hole Capacitors – Molded Axial
T322 (CX01) & T323 (CX05)
Table 1 – Ratings & Part Number Reference cont.
Rated
Voltage
Rated
Cap
(V) 85°C
µF
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
2.2
2.2
2.2
2.7
3.3
3.9
4.7
5.6
6.8
6.8
6.8
8.2
10.0
12.0
15.0
15.0
15.0
18.0
22.0
22.0
22.0
27.0
33.0
33.0
33.0
39.0
47.0
56.0
68.0
82.0
100.0
120.0
150.0
1.0
1.2
1.5
1.5
1.5
1.8
2.2
2.7
3.3
3.9
4.7
4.7
4.7
5.6
6.8
8.2
10.0
12.0
12.0
12.0
15.0
15.0
15.0
(V) 85°C
µF
Rated Voltage
Rated Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
A
A
A
B
B
B
B
B
B
B
B
C
C
C
C
C
C
D
D
D
D
D
D
D
D
E
E
E
E
E
E
F
F
A
A
A
A
A
B
B
B
B
B
B
B
B
C
C
C
C
D
D
D
D
D
D
(See below for
part options)
T322A225J015A(2)
T322A225K015A(2)
T322A225M015A(2)
T322B275(1)015A(2)
T322B335(1)015A(2)
T322B395(1)015A(2)
T322B475(1)015A(2)
T322B565(1)015A(2)
T322B685J015A(2)
T322B685K015A(2)
T322B685M015A(2)
T322C825(1)015A(2)
T322C106(1)015A(2)
T322C126(1)015A(2)
T322C156J015A(2)
T322C156K015A(2)
T322C156M015A(2)
T322D186(1)015A(2)
T322D226J015A(2)
T322D226K015A(2)
T322D226M015A(2)
T322D276(1)015A(2)
T322D336J015A(2)
T322D336K015A(2)
T322D336M015A(2)
T322E396(1)015A(2)
T322E476(1)015A(2)
T322E566(1)015A(2)
T322E686(1)015A(2)
T322E826(1)015A(2)
T322E107(1)015A(2)
T322F127(1)015A(2)
T322F157(1)015A(2)
T322A105(1)020A(2)
T322A125(1)020A(2)
T322A155J020A(2)
T322A155K020A(2)
T322A155M020A(2)
T322B185(1)020A(2)
T322B225(1)020A(2)
T322B275(1)020A(2)
T322B335(1)020A(2)
T322B395(1)020A(2)
T322B475J020A(2)
T322B475K020A(2)
T322B475M020A(2)
T322C565(1)020A(2)
T322C685(1)020A(2)
T322C825(1)020A(2)
T322C106(1)020A(2)
T322D126J020A(2)
T322D126K020A(2)
T322D126M020A(2)
T322D156J020A(2)
T322D156K020A(2)
T322D156M020A(2)
(see below for
part options)
µA at 25°C
Max/5 Minimum
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.7
0.8
0.8
0.8
1.0
1.2
1.4
1.5
1.5
1.5
2.2
2.6
2.6
2.6
3.2
4.0
4.0
4.0
4.7
5.0
6.7
8.2
9.8
10.0
10.0
10.0
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.8
0.8
0.8
0.9
1.1
1.3
1.6
1.9
1.9
1.9
2.4
2.4
2.4
µA at 25°C
Max/5 Minimum
% at 25°C
120 Hz Maximum
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
6
6
% at 25°C
120 Hz Maximum
KEMET Part Number
DC
Leakage
DF
Case Code/
Case Size
CX01 & CX05 Capacitors per
MIL–PRF–49137/1 & 5
Military Part Number
KEMET Part Number
CX05H225K
CX05H225M
T323A225K015A(2)
T323A225M015A(2)
CX05H685K
CX05H685M
T323B685K015A(2)
T323B685M015A(2)
CX05H156K
CX05H156M
T323C156K015A(2)
T323C156M015A(2)
CX05H226K
CX05H226M
T323D226K015A(2)
T323D226M015A(2)
CX05H336K
CX05H336M
T323D336K015A(2)
T323D336M015A(2)
CX05J155K
CX05J155M
T323A155K020A(2)
T323A155M020A(2)
CX05J475K
CX05J475M
T323B475K020A(2)
T323B475M020A(2)
CX05J126K
CX05J126M
T323D126K020A(2)
T323D126M020A(2)
CX05J156K
CX05J156M
T323D156K020A(2)
T323D156M020A(2)
Military Part Number
KEMET Part Number
CX01 & CX05 Capacitors per
MIL–PRF–49137/1 & 5
(1) To complete KEMET part number, insert M for ±20%, K for ±10% or J for 5%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, S = Standard Solder coated (SnPb 5% Pb minimum).
Designates termination finish.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2039_T322_AXIAL_T323 • 2/24/2020
6
Tantalum Through-Hole Capacitors – Molded Axial
T322 (CX01) & T323 (CX05)
Table 1 – Ratings & Part Number Reference cont.
Rated
Voltage
Rated
Cap
(V) 85°C
µF
20
20
20
20
20
20
20
20
20
20
20
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
35
35
35
35
18.0
22.0
27.0
33.0
39.0
47.0
56.0
68.0
82.0
100.0
120.0
0.47
0.56
0.68
0.82
1.0
1.0
1.0
1.2
1.5
1.5
1.5
1.8
1.8
1.8
2.2
2.2
2.2
2.7
3.3
3.3
3.3
3.9
4.7
5.6
6.8
6.8
6.8
8.2
10.0
10.0
10.0
12.0
15.0
18.0
22.0
27.0
33.0
39.0
47.0
56.0
68.0
0.1
0.12
0.15
0.18
(V) 85°C
µF
Rated Voltage
Rated Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
D
D
E
E
E
E
E
E
F
F
F
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
C
C
C
C
C
C
C
C
C
C
D
D
E
E
E
E
E
E
F
F
A
A
A
A
(See below for
part options)
T322D186(1)020A(2)
T322D226(1)020A(2)
T322E276(1)020A(2)
T322E336(1)020A(2)
T322E396(1)020A(2)
T322E476(1)020A(2)
T322E566(1)020A(2)
T322E686(1)020A(2)
T322F826(1)020A(2)
T322F107(1)020A(2)
T322F127(1)020A(2)
T322A474(1)025A(2)
T322A564(1)025A(2)
T322A684(1)025A(2)
T322A824(1)025A(2)
T322A105J025A(2)
T322A105K025A(2)
T322A105M025A(2)
T322B125(1)025A(2)
T322B155J025A(2)
T322B155K025A(2)
T322B155M025A(2)
T322B185J025A(2)
T322B185K025A(2)
T322B185M025A(2)
T322B225J025A(2)
T322B225K025A(2)
T322B225M025A(2)
T322B275(1)025A(2)
T322B335J025A(2)
T322B335K025A(2)
T322B335M025A(2)
T322C395(1)025A(2)
T322C475(1)025A(2)
T322C565(1)025A(2)
T322C685J025A(2)
T322C685K025A(2)
T322C685M025A(2)
T322C825(1)025A(2)
T322C106J025A(2)
T322C106K025A(2)
T322C106M025A(2)
T322D126(1)025A(2)
T322D156(1)025A(2)
T322E186(1)025A(2)
T322E226(1)025A(2)
T322E276(1)025A(2)
T322E336(1)025A(2)
T322E396(1)025A(2)
T322E476(1)025A(2)
T322F566(1)025A(2)
T322F686(1)025A(2)
T322A104(1)035A(2)
T322A124(1)035A(2)
T322A154(1)035A(2)
T322A184(1)035A(2)
(see below for
part options)
µA at 25°C
Max/5 Minimum
2.9
3.5
4.3
5.0
6.2
7.5
8.9
10.0
10.0
10.0
10.0
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.7
0.7
0.7
0.8
0.9
1.1
1.4
1.4
1.4
1.4
1.5
1.5
1.5
2.4
3.0
3.6
4.4
5.4
6.6
7.9
9.4
10.0
10.0
0.5
0.5
0.5
0.5
µA at 25°C
Max/5 Minimum
% at 25°C
120 Hz Maximum
6
6
6
6
6
6
6
6
8
8
8
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
6
3
3
3
3
% at 25°C
120 Hz Maximum
KEMET Part Number
DC
Leakage
DF
Case Code/
Case Size
CX01 & CX05 Capacitors per
MIL–PRF–49137/1 & 5
Military Part Number
KEMET Part Number
CX05K105K
CX05K105M
T323A105K025A(2)
T323A105M025A(2)
CX05K155K
CX05K155M
T323B155K025A(2)
T323B155M025A(2)
CX05K185K
CX05K185M
T323B185K025A(2)
T323B185M025A(2)
CK05K225K
CK05K225M
T323B225K025A(2)
T323B225M025A(2)
CX05K335K
CX05K335M
T323B335K025A(2)
T323B335M025A(2)
CX05K685K
CX05K685M
T323C685K025A(2)
T323C685M025A(2)
CX05K106K
CX05K106M
T323C106K025A(2)
T323C106M025A(2)
Military Part Number
KEMET Part Number
CX01 & CX05 Capacitors per
MIL–PRF–49137/1 & 5
(1) To complete KEMET part number, insert M for ±20%, K for ±10% or J for 5%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, S = Standard Solder coated (SnPb 5% Pb minimum).
Designates termination finish.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2039_T322_AXIAL_T323 • 2/24/2020
7
Tantalum Through-Hole Capacitors – Molded Axial
T322 (CX01) & T323 (CX05)
Table 1 – Ratings & Part Number Reference cont.
Rated
Voltage
Rated
Cap
(V) 85°C
µF
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
50
0.22
0.27
0.33
0.33
0.33
0.39
0.47
0.47
0.47
0.56
0.56
0.56
0.68
0.68
0.68
0.82
0.82
0.82
1.0
1.0
1.0
1.2
1.2
1.2
1.5
1.5
1.5
1.8
2.2
2.7
3.3
3.3
3.3
3.9
3.9
3.9
4.7
4.7
4.7
5.6
6.8
6.8
6.8
8.2
10.0
10.0
10.0
12.0
15.0
18.0
22.0
27.0
33.0
39.0
47.0
0.1
(V) 85°C
µF
Rated Voltage
Rated Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
C
C
C
C
C
C
C
C
C
C
C
C
D
D
D
D
D
D
D
D
E
E
E
E
E
E
F
F
A
(See below for
part options)
T322A224(1)035A(2)
T322A274(1)035A(2)
T322A334J035A(2)
T322A334K035A(2)
T322A334M035A(2)
T322A394(1)035A(2)
T322A474J035A(2)
T322A474K035A(2)
T322A474M035A(2)
T322B564J035A(2)
T322B564K035A(2)
T322B564M035A(2)
T322B684J035A(2)
T322B684K035A(2)
T322B684M035A(2)
T322B824J035A(2)
T322B824K035A(2)
T322B824M035A(2)
T322B105J035A(2)
T322B105K035A(2)
T322B105K035A(2)
T322B125J035A(2)
T322B125K035A(2)
T322B125M035A(2)
T322B155J035A(2)
T322B155K035A(2)
T322B155M035A(2)
T322C185(1)035A(2)
T322C225(1)035A(2)
T322C275(1)035A(2)
T322C335J035A(2)
T322C335K035A(2)
T322C335M035A(2)
T322C395J035A(2)
T322C395K035A(2)
T322C395M035A(2)
T322C475J035A(2)
T322C475K035A(2)
T322C475M035A(2)
T322C565M035A(2)
T322D685J035A(2)
T322D685K035A(2)
T322D685M035A(2)
T322D825(1)035A(2)
T322D106J035A(2)
T322D106K035A(2)
T322D106M035A(2)
T322E126(1)035A(2)
T322E156(1)035A(2)
T322E186(1)035A(2)
T322E226(1)035A(2)
T322E276(1)035A(2)
T322E336(1)035A(2)
T322F396(1)035A(2)
T322F476(1)035A(2)
T322A104J050A(2)
(see below for
part options)
µA at 25°C
Max/5 Minimum
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.8
0.9
0.9
0.9
1.1
1.1
1.1
1.3
1.3
1.3
1.6
1.9
1.9
1.9
2.3
2.8
2.8
2.8
3.3
4.2
5.0
6.2
7.5
9.2
10.0
10.0
0.5
µA at 25°C
Max/5 Minimum
% at 25°C
120 Hz Maximum
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
3
% at 25°C
120 Hz Maximum
KEMET Part Number
DC
Leakage
DF
Case Code/
Case Size
CX01 & CX05 Capacitors per
MIL–PRF–49137/1 & 5
Military Part Number
KEMET Part Number
CX05M334K
CX05M334M
T323A334K035A(2)
T323A334M035A(2)
CX05M474K
CX05M474K
T323A474K035A(2)
T323A474M035A(2)
CX01M564K
CX01M564M
T323B564K035A(2)
T323B564M035A(2)
CX01M684K
CX01M684M
T323B684K035A(2)
T323B684M035A(2)
CX01M824K
CX01M824M
T323B824K035A(2)
T323B824M035A(2)
CX01M105K
CX01M105M
T323B105K035A(2)
T323B105M035A(2)
CX01M125K
CX01M125M
T323B125K035A(2)
T323B125M035A(2)
CX05M155K
CX05M155M
T323B155K035A(2)
T323B155M035A(2)
CX05M335K
CX05M335M
T323C335K035A(2)
T323C335M035A(2)
CX05M395K
CX05M395M
T323C395K035A(2)
T323C395M035A(2)
CX05M475K
CX05M475M
T323C475K035A(2)
T323C475M035A(2)
CX05M685K
CX05M685M
T323D685K035A(2)
T323D685M035A(2)
CX05M106K
CX05M106M
T323D106K035A(2)
T323D106M035A(2)
Military Part Number
KEMET Part Number
CX01 & CX05 Capacitors per
MIL–PRF–49137/1 & 5
(1) To complete KEMET part number, insert M for ±20%, K for ±10% or J for 5%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, S = Standard Solder coated (SnPb 5% Pb minimum).
Designates termination finish.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2039_T322_AXIAL_T323 • 2/24/2020
8
Tantalum Through-Hole Capacitors – Molded Axial
T322 (CX01) & T323 (CX05)
Table 1 – Ratings & Part Number Reference cont.
Rated
Voltage
Rated
Cap
(V) 85°C
µF
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
0.1
0.1
0.12
0.15
0.15
0.15
0.18
0.22
0.22
0.22
0.27
0.33
0.33
0.33
0.39
0.39
0.39
0.47
0.47
0.47
0.56
0.68
0.68
0.68
0.82
1.0
1.0
1.0
1.2
1.5
1.5
1.5
1.8
2.2
2.2
2.2
2.7
3.3
3.3
3.3
3.9
4.7
4.7
4.7
5.6
6.8
8.2
10.0
12.0
15.0
18.0
22.0
27.0
(V) 85°C
µF
Rated Voltage
Rated Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
C
C
C
C
C
C
C
C
D
D
D
D
D
D
D
D
E
E
E
E
F
F
F
F
F
(See below for
part options)
T322A104K050A(2)
T322A104M050A(2)
T322A124(1)050A(2)
T322A154J050A(2)
T322A154K050A(2)
T322A154M050A(2)
T322A184(1)050A(2)
T322A224J050A(2)
T322A224K050A(2)
T322A224M050A(2)
T322A274(1)050A(2)
T322B334J050A(2)
T322B334K050A(2)
T322B334M050A(2)
T322B394J050A(2)
T322B394K050A(2)
T322B394M050A(2)
T322B474J050A(2)
T322B474K050A(2)
T322B474M050A(2)
T322B564(1)050A(2)
T322B684J050A(2)
T322B684K050A(2)
T322B684M050A(2)
T322B824(1)050A(2)
T322B105J050A(2)
T322B105K050A(2)
T322B105M050A(2)
T322C125(1)050A(2)
T322C155J050A(2)
T322C155K050A(2)
T322C155M050A(2)
T322C185(1)050A(2)
T322C225J050A(2)
T322C225K050A(2)
T322C225M050A(2)
T322D275(1)050A(2)
T322D335J050A(2)
T322D335K050A(2)
T322D335M050A(2)
T322D395(1)050A(2)
T322D475J050A(2)
T322D475K050A(2)
T322D475M050A(2)
T322E565(1)050A(2)
T322E685(1)050A(2)
T322E825(1)050A(2)
T322E106(1)050A(2)
T322F126(1)050A(2)
T322F156(1)050A(2)
T322F186(1)050A(2)
T322F226(1)050A(2)
T322F276M050A(2)
(see below for
part options)
µA at 25°C
Max/5 Minimum
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.6
0.6
0.7
0.9
0.9
0.9
1.1
1.3
1.3
1.3
1.6
1.9
1.9
1.9
2.2
2.7
3.2
4.0
4.8
6.0
7.2
8.8
8.0
µA at 25°C
Max/5 Minimum
% at 25°C
120 Hz Maximum
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
% at 25°C
120 Hz Maximum
KEMET Part Number
DC
Leakage
DF
Case Code/
Case Size
CX01 & CX05 Capacitors per
MIL–PRF–49137/1 & 5
Military Part Number
KEMET Part Number
CX05N104K
CX05N104M
T323A104K050A(2)
T323A104M050A(2)
CX05N154K
CX05N154M
T323A154K050A(2)
T323A154M050A(2)
CX05N224K
CX05N224M
T323A224K050A(2)
T323A224M050A(2)
CX05N334K
CX05N334M
T323B334K050A(2)
T323B334M050A(2)
CX05N394K
CX05N394M
T323B394K050A(2)
T323B394M050A(2)
CX05N474K
CX05N474M
T323B474K050A(2)
T323B474M050A(2)
CX05N684K
CX05N684M
T323B684K050A(2)
T323B684M050A(2)
CX05N105K
CX05N105M
T323B105K050A(2)
T323B105M050A(2)
CX05N155K
CX05N155M
T323C155K050A(2)
T323C155M050A(2)
CX05N225K
CX05N225M
T323C225K050A(2)
T323C225M050A(2)
CX05N335K
CX05N335M
T323D335K050A(2)
T323D335M050A(2)
CX05N475K
CX05N475M
T323D475K050A(2)
T323D475M050A(2)
Military Part Number
KEMET Part Number
CX01 & CX05 Capacitors per
MIL–PRF–49137/1 & 5
(1) To complete KEMET part number, insert M for ±20%, K for ±10% or J for 5%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, S = Standard Solder coated (SnPb 5% Pb minimum).
Designates termination finish.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2039_T322_AXIAL_T323 • 2/24/2020
9
Tantalum Through-Hole Capacitors – Molded Axial
T322 (CX01) & T323 (CX05)
Recommended Voltage Derating Guidelines
85°C to 125°C
VR
66% of VR
120%
100%
% Working Voltage
% Change in Working
DC Voltage with
Temperature
−55°C to 85°C
80%
60%
% Change in working DC voltage
with temperature
67%
40%
20%
0%
-55
25
45
85
Temperature (°C)
105
125
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to
Maximum Power Dissipation
Case Size
(Pmax) Watts at 25°C
equivalent series resistance (ESR) and the power dissipation
A
0.060
capabilities of the device. Permissible AC ripple voltage that
B
0.070
may be applied is limited by following criteria:
C
0.080
1. Dissipated power must not exceed the limits specified
D
0.090
for the Series.
E
0.100
2. The positive peak AC voltage plus the DC bias voltage,
F
0.110
if any, must not exceed the DC voltage rating of the
capacitor.
Using the P max of the device, the maximum allowable rms
3. The negative peak AC voltage in combination with
ripple current or voltage may be determined.
bias voltage, if any, must not exceed the allowable limits
specified for reverse voltage.
I(max) = √P max/R
E(max) = Z √P max/R
Thermal capacities for the various case sizes have been
determined empirically and are listed below. The “ripple
voltage” permissible may be calculated from the impedance
and ESR data shown in the respective product section.
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
R = ESR at specified frequency (ohms)
Z = Impedance at specified frequency (ohms)
Temperature Compensation Multipliers
for Maximum Power Dissipation
T ≤ 25°C
1.00
T ≤ 85°C
0.90
T ≤ 125°C
0.40
T= Environmental Temperature
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature
Compensation Multiplier table for details.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2039_T322_AXIAL_T323 • 2/24/2020
10
Tantalum Through-Hole Capacitors – Molded Axial
T322 (CX01) & T323 (CX05)
Optimum Solder Wave Profile
Solder Wave Peak
Temperature 260ºC
Entrance to Solder Wave
Degrees – Cº
Flux Zone
250
225
200
175
150
125
100
75
50
25
Exit from Solder Wave
(Time in Wave – 2 to 4 Seconds)
Preheat Zone
Hot Air Debridging
Exit from
Solder
Machine
80ºC
to 120ºC
Entrance
to Solder
Machine
Free
Air
Cool
Bottom Side
Temperature
Range
Entrance to
In-Line Cleaner
Exit from
In-Line Cleaner
(time in cleaner
may be less)
Immersion in
Cleaning
Vapor
150ºC
Maximum
Top Side
Nominal
0
1
2
3
Time (Minutes)
4
5
6
Reverse Voltage
Although these are polar capacitors, some degree of transient voltage reversal is permissible, as seen below.
The capacitors should not be operated continuously in reverse mode, even within these limits.
Temperature (°C)
Pecentage of Rated Voltage
+25
+85
+125
15
5
1
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2039_T322_AXIAL_T323 • 2/24/2020
11
Tantalum Through-Hole Capacitors – Molded Axial
T322 (CX01) & T323 (CX05)
Construction
Detailed Cross Section
Silver Paint
(Fourth Layer)
Tantalum Wire
Silver
Adhesive
Molded Epoxy
Case
Lead
Wire (−)
Carbon
(Third Layer)
Tantalum
Wire
Lead
Wire (+)
MnO2
(Second Layer)
Ta2O5 Dielectric
(First Layer)
Tantalum
Capacitor Marking
Capacitance Code
Polarity
Voltage
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Tolerance
KEMET Trademark
Date Code (YY/WW)
T2039_T322_AXIAL_T323 • 2/24/2020
12
Tantalum Through-Hole Capacitors – Molded Axial
T322 (CX01) & T323 (CX05)
Storage
Tantalum hermetically sealed capacitors should be stored in normal working environments. While the capacitors themselves
are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity,
corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature
– reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature
not exceed 40°C and maximum storage humidity not exceed 60% relative humidity. Temperature fluctuations should be
minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds.
For optimized solderability capacitors stock should be used promptly, preferably within three years of receipt.
Tape & Reel Packaging Information
KEMET offers standard reeling of Solid Tantalum Capacitors for automatic insertion or lead forming machines per
EIA Specification RS–296.
Table 2 – Packaging Quantity
Case Size
Standard Bulk Standard Reel
Reel C-Spec
Quantity
Quantity
Ammo Pack
Quantity
Ammo Pack
C-Spec
A
300
4,500
2,000
C–7293
B
250
4,000
2,000
Class I
C
100
2,500
1,000
C–7442
D
100
2,500
1,000
Class II
E
100
500
250
C–7443
F
100
500
250
Class III
C–7200
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2039_T322_AXIAL_T323 • 2/24/2020
13
Tantalum Through-Hole Capacitors – Molded Axial
T322 (CX01) & T323 (CX05)
Figure 2
Figure 3
12"
(30.48cm)
*
0.059" to 0.315"
Greater Than
Component
Length
White (+)
(Anode)
Blue (−)
(Cathode)
0.047" Maximum
(1.20)
Hub
0.655"±0.010
Hole
(15.9 ±0.25)
*
3 1 /4 "
(82.6)
1/ "
8
(3.18)
See Table 3
"B"
See Table 3
"A"
0.250" Nominal
(6.35)
Table 3 – Tape Dimensions
Dimensions in Inches (& Millimeters)
BODY DIAMETER
A
PITCH
±0.020 (0.5)
≤ 0.197 (5.0)
0.200 (5.0)
0.198 (5.0) to 0.394 (10.0)
0.400 or (10.0)
B
INSIDE TAPE SPACING
2.063 (52.4)
+0.079, −0.039 (+2.0, −1.0)
2.874 (73)
+/0.059
Capacitors are reeled so that positive leads are oriented as shown in Figure 3. Kraft paper (50 lbs. test minimum) is inserted
between the layers of capacitors wound on reels for component pitch ≤ 0.200" sizes and corrugated paper (70 lbs. test
minimum), single faced is inserted for component pitch ≥ 0.400" sizes. Capacitor lead length may extend only a maximum
of 0.031" (0.8 mm) beyond the tape’s edges. Capacitors are centered in a row between the two tapes and will deviate only
±0.031" (0.79 mm) from the row center.
Figures 1 and 2 show the KEMET standard chipboard tape reel.
A minimum of 36" (91.5 cm) leader tape is provided at each end of the reeled capacitors.
Universal splicing clips are used to connect the tape.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2039_T322_AXIAL_T323 • 2/24/2020
14
Tantalum Through-Hole Capacitors – Molded Axial
T322 (CX01) & T323 (CX05)
KEMET Electronics Corporation Sales Offices
For a complete list of our global sales offi ces, please visit www.kemet.com/sales.
Disclaimer
All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes
no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury
or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2039_T322_AXIAL_T323 • 2/24/2020
15
工商网监
湘ICP备2023018690号
