T493A106M010BH6420

Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO2 (CWR11 Style) Overview The KEMET T493 is designed for the High Reliability Series (HRA) requirements of military and aerospace applications. The T493 is a surface mount product, offering various lead-frame plating options, Weibull grading options, surge current testing, F-Tech (an improved anode manufacturing process), and Simulated Breakdown Voltage (SBDV) screening options to improve long term reliability. Standard, low, and ultra-low ESR options are available. All lots of T493 are conditioned with MIL-PRF-55365 Group A testing. This series is also approved for DLA drawing 07016 (please see part number list specific to this drawing). KEMET’s F-Tech eliminates hidden defects in the dielectric, which continue to grow in the field, causing capacitor failures. Based on the fundamental understanding of degradation mechanisms in tantalum and niobium capacitors, F-Tech incorporates multiple process methodologies. Some minimize the oxygen and carbon content in the anodes, which become contaminants and can lead to the crystallization of the anodic oxide dielectric. This process methodology reduces the contaminants, improving quality of the dielectric. An additional technology provides a stronger mechanical connection point between the tantalum lead wire and tantalum anode, enhancing robustness and product reliability. The benefit of F-Tech is illustrated by a 2,000 hour, 85°C, 1.32 X rated voltage accelerated life test. F-Tech parts see no degradation while standard tantalums have 1.5 orders of magnitude degradation in leakage current. F-Tech is currently available for T493 Series (select D and X case capacitance values in 25 V and higher rated voltage). Please contact KEMET for details on ordering other part types with these capabilities. The KEMET patented Simulated Breakdown Screening (SBDS) is a nondestructive testing technique that simulates the breakdown voltage (BDV) of a capacitor, without the damage to its dielectric or to the general population of capacitors. This screening identifies hidden defects in the dielectric, providing the highest level of dielectric testing. SBDS is based on the simulation of breakdown voltage (BDV), the ultimate test of the dielectric in a capacitor. Low BDV indicates defects in the dielectric, and therefore, a higher probability of failure in the field. High BDV indicates a stronger dielectric and high-reliability performance in the field. This new screening method allows KEMET to identify the breakdown voltage of each individual capacitor and provide only the strongest capacitors from each lot. SBDS is currently available on select part types in the T493 and T497. Please contact KEMET for details on ordering other part types with these capabilities. KEMET offers these technologies per the following options: • F-Tech only • SBDS only • Combination of both F-Tech and SBDS for the ultimate protection Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2007_T493 • 2/14/2020 1 Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO2 (CWR11 Style) Benefits • F-Tech and Simulated Breakdown Voltage (SBDS) screening options available • Tape & Reel standard packaging per EIA 481 • Symmetrical, compliant terminations • Laser-marked case • 100% surge current test available on all case sizes • Termination options B, C, H, K, T, N, and M • Weibull failure options B and C •• All parts tested per Group A of MIL–PRF–55365 • Approved for DLA Drawing 07016 applications* * Defense Logistics Agency (DLA), previously identified as DSCC Applications Typical applications include decoupling and filtering in military and aerospace applications. Environmental Compliance RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Ordering Information T 493 D 227 K 006 C H Capacitor Class Rated Failure Rate/ Capacitance Capacitance Voltage Termination Finish Series Case Size Code (pF) Tolerance Design (VDC) T= Tantalum Military COTS A, B, C, D, E, X First two digits represent significant figures. Third digit specifies number of zeros. J = ±5% K = ±10% M = ±20% 004 = 4 006 = 6.3 010 = 10 016 = 16 020 = 20 025 = 25 035 = 35 050 = 50 063 = 63 A = N/A B = 0.1%/ 1,000 hours C = 0.01%/ 1,000 hours C = Hot solder dipped H = Standard soldercoated (SnPb 5% Pb minimum) B = Gold-plated K = Solder fused T = 100% tin N = Non-magnetic 100% tin (Sn) M = Non-magnetic (SnPb) 61 20 Surge ESR 61 = None 62 = 10 Cycles after Weibull, 25°C 63 = 10 cycles after Weibull, −55°C and 85°C after Weibull 64 = 10 cycles before Weibull,−55° and +85°C 10 = ESR – standard 20 = ESR – low 30 = ESR – ultra-low Packaging (C-Spec) Blank = 7" reel 7280 = 13" reel 7610 = Bulk Bag 7640 = Bulk plastic box WAFL = Waffle pack For detailed part number offerings, please refer to: Table 1A – COTS, Table 1B – DLA Drawing 07016 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2007_T493 • 2/14/2020 2 Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO2 (CWR11 Style) Ordering Information – DLA Drawing 07016 07016- 001 K B H A Drawing Number Dash Number Capacitance Tolerance Reliability Grade Termination Finish Surge See Part Number Table J = ±5% K = ±10% M = ±20% B = 0.1%/1,000 hours C = 0.01%/1,000 hours C = Hot solder dipped H = Standard solder coated (SnPb 5% Pb minimum) B = Gold-plated A = +25°C after Weibull B = −55°C and +85°C after Weibull C = −55°C and +85°C before Weibull Z or no option= No test required For detailed part number offerings, please refer to: Table 1A – COTS, Table 1B – DLA Drawing 07016 Ordering Information – F-Tech & Simulated Breakdown Screening (SBDS) T 493 Capacitor Class Series T= Tantalum Military COTS D 226 K 020 Rated Case Capacitance Capacitance Voltage Tolerance Size Code (pF) (VDC) A, B, C, D, E, X First two digits represent significant figures. Third digit specifies number of zeros. J = ±5% K = ±10% M = ±20% 025 = 25 035 = 35 050 = 50 063 = 63 C H 61 20 Failure Rate/ Design Termination Finish Surge Screening/ESR C = Hot solder dipped H = Standard soldercoated (SnPb 5% Pb minimum) B = Gold-plated K = Solder fused T = 100% tin N = Non-magnetic 100% tin (Sn) M = Non-magnetic (SnPb) 61 = None 62 = 10 Cycles after Weibull, 25°C 63 = 10 cycles after Weibull, −55°C and 85°C after Weibull 64 = 10 cycles before Weibull, −55° and +85°C 11 = F-Tech + SBDS * 12 = SBDS 13 = F-Tech * 21 = Low ESR + 11 22= Low ESR + 12 23 = Low ESR + 13 31= Ultra-low ESR + 11 32 = Ultra-low ESR + 12 33 = Ultra-ow ESR + 13 A = N/A B = 0.1%/ 1,000 hours C = 0.01%/ 1,000 hours Packaging (C-Spec) Blank = 7" Reel 7280 = 13" Reel 7610 = Bulk bag 7640 = Bulk plastic box WAFL = Waffle pack * Select "C", "D" and "X" case sizes in 20 V and higher rated voltage For detailed part number offerings, please refer to: Table 1A – COTS, Table 1B – DLA Drawing 07016 Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range −55° C to 125° C 0.1 – 470 μF at 120 Hz/25°C J tolerance (5%), K tolerance (10%), M tolerance (20%) 4 – 63 V DF (120 Hz) Refer to Part Number Electrical Specification Table ESR (100 kHz) Refer to Part Number Electrical Specification Table Leakage Current ≤ 0.01 CV (µA) at rated voltage after 5 minutes © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2007_T493 • 2/14/2020 3 Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO2 (CWR11 Style) Qualification Test Condition Characteristics Δ C/C Endurance 85°C at rated voltage, 2,000 hours 125°C at 2/3 rated voltage, 2,000 hours Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits Δ C/C Storage Life 125°C at 0 volts, 2,000 hours Temperature Stability MIL–STD–202, Method 107, Condition B, mounted, −55°C to 125°C, 1,000 cycles Extreme temperature exposure at a succession of continuous steps at +25°C, −55°C, +25°C, +85°C, +125°C, +25°C Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits Mechanical Shock/ Vibration Within ±5% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits +25°C −55°C +85°C +125°C Δ C/C IL* ±10% ±10% ±15% DF IL IL 1.5 x IL 1.5 x IL DCL IL N/A 10 x IL 12 x IL Δ C/C Surge Voltage Within ±10% of initial value DF Δ C/C Thermal Shock Within ±10% of initial value DF 25°C and 85°C, 1.32 x rated voltage 1,000 cycles (125°C, 1.2 x rated voltage) MIL–STD–202, Method 213, Condition I, 100 G peak MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz, 20 G peak Within ±5% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits Δ C/C Within ±10% of initial value DF Within initial limits DCL Within initial limits *IL = Initial limit Certification MIL–PRF–55365/8 DLA Drawing 07016 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2007_T493 • 2/14/2020 4 Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO2 (CWR11 Style) Electrical Characteristics ESR vs. Frequency 1,000 T493B106/020_IMP T493E476/035_IMP T493X226/035_IMP T493B106/020_ESR T493E476/035_ESR T493X226/035_ESR Impedance, ESR (Ohms) 100 10 1 0.1 0.01 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 Capacitance vs. Frequency Capacitance (µF) 100 10 T493B106/020 T493E476/035 T493X226/035 1 0.1 100 1,000 10,000 100,000 Frequency (Hz) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 1,000,000 10,000,000 T2007_T493 • 2/14/2020 5 Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO2 (CWR11 Style) Dimensions – Millimeters (Inches) Metric will govern CATHODE (-) END VIEW SIDE VIEW ANODE (+) END VIEW BOTTOM VIEW A B W B H X T S G S Case Size KEMET EIA F E P Termination cutout at KEMET's option, either end R L Typical Weight Component L W H F ±0.1 S ±0.3 B ±0.15 ±(0.004) ±(0.012) (Ref) ±0.006 X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref) (mg) A 3.2±0.2 1.6±0.2 1.6±0.2 3216–18 (0.126±0.008) (0.063±0.008) (0.063±0.008) 1.2 (0.047) 0.8 (0.031) 0.4 (0.016) 0.10±0.10 0.4 0.4 0.13 1.2 1.1 1.3 (0.004±0.004) (0.016) (0.016) (0.005) (0.047) (0.043) (0.051) 58.97 B 3.5±0.2 2.8±0.2 1.9±0.2 3528–21 (0.138±0.008) (0.110±0.008) (0.075±0.008) 2.2 (0.087) 0.8 (0.031) 0.4 (0.016) 0.10±0.10 0.5 1.0 0.13 1.9 1.8 2.2 (0.004±0.004) (0.020) (0.039) (0.005) (0.075) (0.071) (0.087) 102.3 C 6.0±0.3 3.2±0.3 2.5±0.3 6032–28 (0.236±0.012) (0.126±0.012) (0.098±0.012) 2.2 (0.087) 1.3 (0.051) 0.5 (0.020) 0.10±0.10 0.9 1.0 0.13 3.1 2.8 2.4 (0.004±0.004) (0.035) (0.039) (0.005) (0.122) (0.110) (0.094) 224.2 D 7.3±0.3 4.3±0.3 2.8±0.3 7343–31 (0.287±0.012) (0.169±0.012) (0.110±0.012) 4.0±0.3 7.3±0.3 4.3±0.3 7343–43 (0.287±0.012) (0.169±0.012) (0.157±0.012) 7.3±0.3 6.0±0.3 3.6±0.2 7360–38 (0.287±0.012) (0.236±0.012) (0.142±0.008) 2.4 (0.094) 2.4 (0.094) 3.1 (0.120) 1.3 (0.051) 1.3 (0.051) 1.3 (0.051) 0.5 (0.020) 0.5 (0.020) 0.5 (0.020) 0.10±0.10 0.9 1.0 0.13 3.8 3.5 3.5 (0.004±0.004) (0.035) (0.039) (0.005) (0.150) (0.138) (0.138) 0.10±0.10 1.7 1.0 0.13 3.8 3.5 3.5 (0.004±0.004) (0.067) (0.039) (0.005) (0.150) (0.138) (0.138) 0.10±0.10 0.13 3.8 3.5 3.5 N/A (0.005) (0.004±0.004) N/A (0.150) (0.138) (0.138) 412.33 X E 652.04 803.76 Notes: (Ref) – Dimensions provided for reference only. For low profile cases, no dimensions are provided for B, P, or R because these cases do not have a bevel or a notch. These weights are provided as reference. If exact weights are needed, please contact your KEMET Sales Representative © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2007_T493 • 2/14/2020 6 Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO2 (CWR11 Style) Dimensions – Millimeters (Inches) DLA Drawing 07016 SIDE VIEW END VIEW L W Termination cutout at KEMET's option, either end BOTTOM VIEW Solderable Surfaces H P W2 P Case Size Component Typical Weight KEMET H L P ±0.3 (0.012) W W2 ±0.1 (0.004) (mg) A 1.6±0.2 (0.063±0.008) 1.9±0.2 (0.075±0.008) 2.5±0.3 (0.098±0.012) 2.8±0.3 (0.110±0.012) 4.0±0.3 (0.157±0.012) 3.6±0.2 (0.142±0.008) 3.2±0.2 (0.126±0.008) 3.5±0.2 (0.138±0.008) 6.0±0.3 (0.236±0.012) 7.3±0.3 (0.287±0.012) 7.3±0.3 (0.287±0.012) 7.3±0.3 (0.287±0.012) 0.8 (0.031) 0.8 (0.031) 1.3 (0.051) 1.3 (0.051) 1.3 (0.051) 1.3 (0.051) 1.6±0.2 (0.063±0.008) 2.8±0.2 (0.110±0.008) 3.2±0.3 (0.126±0.012) 4.3±0.3 (0.169±0.012) 4.3±0.3 (0.169±0.012) 6.0±0.3 (0.236±0.012) 1.2 (0.047) 2.2 (0.087) 2.2 (0.087) 2.4 (0.094) 2.4 (0.094) 3.1 (0.120)* 58.97 B C D X E 102.3 224.2 412.33 652.04 803.76 * Previously, KEMET’S “W2” dimension was 4.10 (0.161) for the “E” case. These weights are provided as reference. If exact weights are needed, please contact your KEMET Sales Representative © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2007_T493 • 2/14/2020 7 Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO2 (CWR11 Style) Table 1A – Ratings & Part Number Reference Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number VDC at 85°C µF KEMET/EIA (See below for part options) 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 2.2 3.3 4.7 6.8 6.8 10 10 15 15 22 22 22 33 33 33 47 47 68 68 68 100 100 100 100 150 150 220 330 330 1.5 2.2 3.3 4.7 4.7 6.8 6.8 10 10 15 15 15 22 22 22 33 33 47 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 A/3216-18 B/3528-21 A/3216-18 B/3528-21 A/3216-18 B/3528-21 C/6032-28 A/3216-18 B/3528-21 C/6032-28 B/3528-21 C/6032-28 B/3528-21 C/6032-28 D/7343-31 A/3216-18 B/3528-21 C/6032-28 D/7343-31 C/6032-28 D/7343-31 D/7343-31 D/7343-31 X/7343-43 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 A/3216-18 B/3528-21 A/3216-18 B/3528-21 A/3216-18 B/3528-21 C/6032-28 A/3216-18 B/3528-21 C/6032-28 B/3528-21 C/6032-28 B/3528-21 T493A225(1)004(2)(3)(4)(5) T493A335(1)004(2)(3)(4)(5) T493A475(1)004(2)(3)(4)(5) T493A685(1)004(2)(3)(4)(5) T493B685(1)004(2)(3)(4)(5) T493A106(1)004(2)(3)(4)(5) T493B106(1)004(2)(3)(4)(5) T493A156(1)004(2)(3)(4)(5) T493B156(1)004(2)(3)(4)(5) T493A226(1)004(2)(3)(4)(5) T493B226(1)004(2)(3)(4)(5) T493C226(1)004(2)(3)(4)(5) T493A336(1)004(2)(3)(4)(5) T493B336(1)004(2)(3)(4)(5) T493C336(1)004(2)(3)(4)(5) T493B476(1)004(2)(3)(4)(5) T493C476(1)004(2)(3)(4)(5) T493B686(1)004(2)(3)(4)(5) T493C686(1)004(2)(3)(4)(5) T493D686(1)004(2)(3)(4)(5) T493A107(1)004(2)(3)(4)(5) T493B107(1)004(2)(3)(4)(5) T493C107(1)004(2)(3)(4)(5) T493D107(1)004(2)(3)(4)(5) T493C157(1)004(2)(3)(4)(5) T493D157(1)004(2)(3)(4)(5) T493D227(1)004(2)(3)(4)(5) T493D337(1)004(2)(3)(4)(5) T493X337(1)004(2)(3)(4)(5) T493A155(1)006(2)(3)(4(5) T493A225(1)006(2)(3)(4)(5) T493A335(1)006(2)(3)(4)(5) T493A475(1)006(2)(3)(4)(5) T493B475(1)006(2)(3)(4)(5) T493A685(1)006(2)(3)(4)(5) T493B685(1)006(2)(3)(4)(5) T493A106(1)006(2)(3)(4)(5) T493B106(1)006(2)(3)(4)(5) T493A156(1)006(2)(3)(4)(5) T493B156(1)006(2)(3)(4)(5) T493C156(1)006(2)(3)(4)(5) T493A226(1)006(2)(3)(4)(5) T493B226(1)006(2)(3)(4)(5) T493C226(1)006(2)(3)(4)(5) T493B336(1)006(2)(3)(4)(5) T493C336(1)006(2)(3)(4)(5) T493B476(1)006(2)(3)(4)(5) VDC at 85°C µF KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF Standard ESR Low ESR Ultralow ESR µA at +25°C Maximum/ 5 Minutes 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.9 0.9 0.9 1.3 1.3 1.3 1.9 1.9 2.7 2.7 2.7 4 4 4 4 6 6 8.8 13.2 13.2 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.9 0.9 0.9 1.4 1.4 1.4 2.1 2.1 3.0 µA at +25°C Maximum/ 5 Minutes % at +25°C 120 Hz Maximum 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 30.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 % at +25°C 120 Hz Maximum Ω at 25°C 100 kHz Maximum 8.0 8.0 8.0 6.0 5.5 6.0 3.5 4.0 3.5 4.0 3.5 1.8 4.0 3.5 1.8 3.0 1.8 3.5 1.6 0.8 1.4 1.0 1.2 0.8 1.2 0.8 0.9 0.7 0.5 8.0 8.0 8.0 6.0 5.5 6.0 3.5 4.0 3.5 4.0 3.5 1.8 4.0 3.5 1.8 3.0 1.8 3.5 Ω at 25°C 100 kHz Maximum Ω at 25°C 100 kHz Maximum 6.0 4.0 3.5 3.0 2.0 2.0 1.2 1.5 1.2 1.5 0.6 0.5 3.0 0.5 0.5 0.5 0.5 2.0 0.25 0.2 N/A 0.7 0.2 0.2 0.3 0.15 0.7 0.15 0.2 6.0 6.0 6.0 3.5 3.5 2.0 1.2 2.0 1.0 1.5 0.7 0.6 3.0 0.6 0.5 0.6 0.3 2.0 Ω at 25°C 100 kHz Maximum Ω at 25°C 100 kHz Maximum N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 0.50 N/A N/A 0.25 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Ω at 25°C 100 kHz Maximum DC Leakage DF Standard ESR Low ESR Ultra-low ESR Maximum Operating Temp MSL °C Reflow Temp ≤ 260°C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 °C Reflow Temp ≤ 260°C Maximum Operating Temp MSL (1) To complete KEMET part number, insert M for ± 20%, K for ± 10% or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert B (0.1%/1,000 Hours), C (0.01%/1,000 Hours) or A = N/A. Designates Reliability Level. (3) To complete KEMET part number, insert B = Gold-plated, C = Hot solder dipped, H = Solder-plated, K = Solder Fused or T = 100% Tin (Sn). Designates Termination Finish. (4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles −55°C +85°C after Weibull 64 = 10 cycles −55°C +85°C before Weibull or 6(X)11, 6(X)12, 6(X)13, 6(X)21, 6(X)22, 6(X)23, 6(X)31, 6(X)32, 6(X)33. Designates screening options. (5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option. Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2007_T493 • 2/14/2020 8 Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO2 (CWR11 Style) Table 1A – Ratings & Part Number Reference cont. Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number VDC at 85°C µF KEMET/EIA (See below for part options) 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 47 47 68 68 68 100 100 100 150 150 220 220 220 330 330 470 1 1.5 2.2 3.3 3.3 4.7 4.7 6.8 6.8 10 10 10 15 15 15 22 22 33 33 33 47 47 68 68 68 100 100 150 150 220 220 C/6032-28 D/7343-31 B/3528-21 C/6032-28 D/7343-31 B/3528-21 C/6032-28 D/7343-31 C/6032-28 D/7343-31 C/6032-28 D/7343-31 X/7343-43 D/7343-31 X/7343-43 X/7343-43 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 A/3216-18 B/3528-21 A/3216-18 B/3528-21 A/3216-18 B/3528-21 C/6032-28 A/3216-18 B/3528-21 C/6032-28 B/3528-21 C/6032-28 B/3528-21 C/6032-28 D/7343-31 C/6032-28 D/7343-31 C/6032-28 D/7343-31 X/7343-43 C/6032-28 D/7343-31 D/7343-31 X/7343-43 D/7343-31 X/7343-43 T493C476(1)006(2)(3)(4)(5) T493D476(1)006(2)(3)(4)(5) T493B686(1)006(2)(3)(4)(5) T493C686(1)006(2)(3)(4)(5) T493D686(1)006(2)(3)(4)(5) T493B107(1)006(2)(3)(4)(5) T493C107(1)006(2)(3)(4)(5) T493D107(1)006(2)(3)(4)(5) T493C157(1)006(2)(3)(4)(5) T493D157(1)006(2)(3)(4)(5) T493C227(1)006(2)(3)(4)(5) T493D227(1)006(2)(3)(4)(5) T493X227(1)006(2)(3)(4)(5) T493D337(1)006(2)(3)(4)(5) T493X337(1)006(2)(3)(4)(5) T493X477(1)006(2)(3)(4)(5) T493A105(1)010(2)(3)(4)(5) T493A155(1)010(2)(3)(4)(5) T493A225(1)010(2)(3)(4)(5) T493A335(1)010(2)(3)(4)(5) T493B335(1)010(2)(3)(4)(5) T493A475(1)010(2)(3)(4)(5) T493B475(1)010(2)(3)(4)(5) T493A685(1)010(2)(3)(4)(5) T493B685(1)010(2)(3)(4)(5) T493A106(1)010(2)(3)(4)(5) T493B106(1)010(2)(3)(4)(5) T493C106(1)010(2)(3)(4)(5) T493A156(1)010(2)(3)(4)(5) T493B156(1)010(2)(3)(4)(5) T493C156(1)010(2)(3)(4)(5) T493B226(1)010(2)(3)(4)(5) T493C226(1)010(2)(3)(4)(5) T493B336(1)010(2)(3)(4)(5) T493C336(1)010(2)(3)(4)(5) T493D336(1)010(2)(3)(4)(5) T493C476(1)010(2)(3)(4)(5) T493D476(1)010(2)(3)(4)(5) T493C686(1)010(2)(3)(4)(5) T493D686(1)010(2)(3)(4)(5) T493X686(1)010(2)(3)(4)(5) T493C107(1)010(2)(3)(4)(5) T493D107(1)010(2)(3)(4)(5) T493D157(1)010(2)(3)(4)(5) T493X157(1)010(2)(3)(4)(5) T493D227(1)010(2)(3)(4)(5) T493X227(1)010(2)(3)(4)(5) VDC at 85°C µF KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF Standard ESR Low ESR Ultralow ESR µA at +25°C Maximum/ 5 Minutes 3.0 3.0 4.3 4.3 4.3 6.3 6.3 6.3 9.5 9.5 13.9 13.9 13.9 20.8 20.8 29.6 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.7 0.7 1 1 1 1.5 1.5 1.5 2.2 2.2 3.3 3.3 3.3 4.7 4.7 6.8 6.8 6.8 10 10 15 15 22 22 µA at +25°C Maximum/ 5 Minutes % at +25°C 120 Hz Maximum 6.0 6.0 8.0 6.0 6.0 15.0 8.0 8.0 8.0 8.0 10.0 8.0 8.0 8.0 8.0 10.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 4.0 8.0 8.0 8.0 8.0 8.0 8.0 % at +25°C 120 Hz Maximum Ω at 25°C 100 kHz Maximum 1.6 0.8 1.0 1.2 0.8 10.0 1.2 0.8 1.2 0.7 1.2 0.7 0.7 0.5 0.5 0.2 10.0 8.0 8.0 6.0 5.5 6.0 3.5 6.0 3.5 4.0 3.5 1.8 6.0 3.5 1.8 3.0 1.8 3.5 1.6 0.8 1.2 0.8 1.2 0.8 0.5 1.2 0.7 0.7 0.7 0.5 0.5 Ω at 25°C 100 kHz Maximum Ω at 25°C 100 kHz Maximum 0.25 0.22 0.65 0.2 0.2 8.0 0.3 0.15 0.3 0.15 0.3 0.1 0.15 0.15 0.1 0.1 6.0 6.0 6.0 4.0 3.5 3.0 1.5 3.0 1.2 1.8 0.8 0.6 4.0 0.7 0.5 0.7 0.4 2.0 0.3 0.3 0.3 0.2 0.3 0.2 0.15 0.3 0.1 0.1 0.2 0.2 0.1 Ω at 25°C 100 kHz Maximum Ω at 25°C 100 kHz Maximum N/A N/A N/A N/A 0.18 0.70 0.15 N/A 0.20 N/A 0.23 0.10 0.07 0.10 0.07 0.05 N/A N/A N/A N/A N/A N/A 1.3 N/A 0.90 N/A 0.75 N/A 3.2 N/A 0.48 N/A 0.29 N/A N/A N/A N/A 0.08 0.23 0.09 N/A N/A 0.08 0.08 0.09 0.08 0.05 Ω at 25°C 100 kHz Maximum DC Leakage DF Standard ESR Low ESR Ultra-low ESR Maximum Operating Temp MSL °C Reflow Temp ≤ 260°C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 °C Reflow Temp ≤ 260°C Maximum Operating Temp MSL (1) To complete KEMET part number, insert M for ± 20%, K for ± 10% or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert B (0.1%/1,000 Hours), C (0.01%/1,000 Hours) or A = N/A. Designates Reliability Level. (3) To complete KEMET part number, insert B = Gold-plated, C = Hot solder dipped, H = Solder-plated, K = Solder Fused or T = 100% Tin (Sn). Designates Termination Finish. (4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles −55°C +85°C after Weibull 64 = 10 cycles −55°C +85°C before Weibull or 6(X)11, 6(X)12, 6(X)13, 6(X)21, 6(X)22, 6(X)23, 6(X)31, 6(X)32, 6(X)33. Designates screening options. (5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option. Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2007_T493 • 2/14/2020 9 Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO2 (CWR11 Style) Table 1A – Ratings & Part Number Reference cont. Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number VDC at 85°C µF KEMET/EIA (See below for part options) 10 10 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 330 470 0.68 1 1.5 2.2 3.3 3.3 4.7 4.7 6.8 6.8 6.8 10 10 10 15 15 22 22 22 33 33 47 47 68 100 100 150 150 220 0.47 0.68 1 1.5 1.5 2.2 2.2 3.3 3.3 4.7 4.7 4.7 6.8 6.8 10 10 X/7343-43 X/7343-43 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 A/3216-18 B/3528-21 A/3216-18 B/3528-21 C/6032-28 A/3216-18 B/3528-21 C/6032-28 B/3528-21 C/6032-28 B/3528-21 C/6032-28 D/7343-31 C/6032-28 D/7343-31 C/6032-28 D/7343-31 D/7343-31 D/7343-31 X/7343-43 D/7343-31 X/7343-43 X/7343-43 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 A/3216-18 B/3528-21 A/3216-18 B/3528-21 A/3216-18 B/3528-21 C/6032-28 B/3528-21 C/6032-28 B/3528-21 C/6032-28 T493X337(1)010(2)(3)(4)(5) T493X477(1)010(2)(3)(4)(5) T493A684(1)016(2)(3)(4)(5) T493A105(1)016(2)(3)(4)(5) T493A155(1)016(2)(3)(4)(5) T493A225(1)016(2)(3)(4)(5) T493A335(1)016(2)(3)(4)(5) T493B335(1)016(2)(3)(4)(5) T493A475(1)016(2)(3)(4)(5) T493B475(1)016(2)(3)(4)(5) T493A685(1)016(2)(3)(4)(5) T493B685(1)016(2)(3)(4)(5) T493C685(1)016(2)(3)(4)(5) T493A106(1)016(2)(3)(4)(5) T493B106(1)016(2)(3)(4)(5) T493C106(1)016(2)(3)(4)(5) T493B156(1)016(2)(3)(4)(5) T493C156(1)016(2)(3)(4)(5) T493B226(1)016(2)(3)(4)(5) T493C226(1)016(2)(3)(4)(5) T493D226(1)016(2)(3)(4)(5) T493C336(1)016(2)(3)(4)(5) T493D336(1)016(2)(3)(4)(5) T493C476(1)016(2)(3)(4)(5) T493D476(1)016(2)(3)(4)(5) T493D686(1)016(2)(3)(4)(5) T493D107(1)016(2)(3)(4)(5) T493X107(1)016(2)(3)(4)(5) T493D157(1)016(2)(3)(4)(5) T493X157(1)016(2)(3)(4)(5) T493X227(1)016(2)(3)(4)(5) T493A474(1)020(2)(3)(4)(5) T493A684(1)020(2)(3)(4)(5) T493A105(1)020(2)(3)(4)(5) T493A155(1)020(2)(3)(4)(5) T493B155(1)020(2)(3)(4)(5) T493A225(1)020(2)(3)(4)(5) T493B225(1)020(2)(3)(4)(5) T493A335(1)020(2)(3)(4)(5) T493B335(1)020(2)(3)(4)(5) T493A475(1)020(2)(3)(4)(5) T493B475(1)020(2)(3)(4)(5) T493C475(1)020(2)(3)(4)(5) T493B685(1)020(2)(3)(4)(5) T493C685(1)020(2)(3)(4)(5) T493B106(1)020(2)(3)(4)(5) T493C106(1)020(2)(3)(4)(5) VDC at 85°C µF KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF Standard ESR Low ESR Ultralow ESR µA at +25°C Maximum/ 5 Minutes 33 47 0.5 0.5 0.5 0.5 0.5 0.5 0.8 0.8 1.1 1.1 1.1 1.6 1.6 1.6 2.4 2.4 3.5 3.5 3.5 5.3 5.3 7.5 7.5 10.9 16 16 24 24 35.2 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.7 0.7 0.9 0.9 0.9 1.4 1.4 2 2 µA at +25°C Maximum/ 5 Minutes % at +25°C 120 Hz Maximum 10.0 10.0 6.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 8.0 12.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 % at +25°C 120 Hz Maximum Ω at 25°C 100 kHz Maximum 0.5 0.2 12.0 10.0 8.0 6.0 6.0 3.5 6.0 3.5 7.0 3.5 1.9 3.0 3.5 1.8 3.0 1.8 2.2 1.6 0.8 1.2 0.8 1.2 0.8 0.7 0.7 0.7 0.7 0.5 0.5 14.0 12.0 10.0 8.0 6.0 7.0 3.5 7.0 3.5 6.0 3.5 2.4 3.5 1.9 3.0 1.8 Ω at 25°C 100 kHz Maximum Ω at 25°C 100 kHz Maximum 0.1 0.05 8.0 6.0 6.0 4.0 3.5 2.0 3.0 1.5 3.0 1.2 0.8 N/A 0.8 0.6 0.8 0.4 0.8 0.4 0.25 0.3 0.25 0.5 0.2 0.2 0.125 0.1 0.4 0.2 0.2 9.0 8.0 5.5 4.5 4.0 4.0 1.5 4.0 1.3 1.8 1.0 0.6 1.0 0.6 1.0 0.5 Ω at 25°C 100 kHz Maximum Ω at 25°C 100 kHz Maximum 0.05 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 0.75 N/A N/A N/A N/A N/A N/A N/A N/A 0.23 0.15 0.35 0.10 0.15 0.10 0.08 0.15 0.10 0.10 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 0.48 Ω at 25°C 100 kHz Maximum DC Leakage DF Standard ESR Low ESR Ultra-low ESR Maximum Operating Temp MSL °C Reflow Temp ≤ 260°C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 °C Reflow Temp ≤ 260°C Maximum Operating Temp MSL (1) To complete KEMET part number, insert M for ± 20%, K for ± 10% or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert B (0.1%/1,000 Hours), C (0.01%/1,000 Hours) or A = N/A. Designates Reliability Level. (3) To complete KEMET part number, insert B = Gold-plated, C = Hot solder dipped, H = Solder-plated, K = Solder Fused or T = 100% Tin (Sn). Designates Termination Finish. (4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles −55°C +85°C after Weibull 64 = 10 cycles −55°C +85°C before Weibull or 6(X)11, 6(X)12, 6(X)13, 6(X)21, 6(X)22, 6(X)23, 6(X)31, 6(X)32, 6(X)33. Designates screening options. (5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option. Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2007_T493 • 2/14/2020 10 Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO2 (CWR11 Style) Table 1A – Ratings & Part Number Reference cont. Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number VDC at 85°C µF KEMET/EIA (See below for part options) 20 20 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 35 35 35 35 35 15 15 22 22 33 47 47 68 68 0.33 0.47 0.68 0.68 1 1 1.5 1.5 2.2 2.2 2.2 3.3 3.3 4.7 4.7 4.7 6.8 6.8 6.8 10 10 15 15 15 22 22 22 33 33 47 47 68 68 0.1 0.15 0.22 0.33 0.47 C/6032-28 D/7343-31 C/6032-28 D/7343-31 D/7343-31 D/7343-31 X/7343-43 D/7343-31 X/7343-43 A/3216-18 A/3216-18 A/3216-18 B/3528-21 A/3216-18 B/3528-21 A/3216-18 B/3528-21 A/3216-18 B/3528-21 C/6032-28 B/3528-21 C/6032-28 A/3216-18 B/3528-21 C/6032-28 B/3528-21 C/6032-28 D/7343-31 C/6032-28 D/7343-31 C/6032-28 D/7343-31 X/7343-43 C/6032-28 D/7343-31 X/7343-43 D/7343-31 X/7343-43 D/7343-31 X/7343-43 X/7343-43 E/7360-38 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 T493C156(1)020(2)(3)(4)(5) T493D156(1)020(2)(3)(4)(5) T493C226(1)020(2)(3)(4)(5) T493D226(1)020(2)(3)(4)(5) T493D336(1)020(2)(3)(4)(5) T493D476(1)020(2)(3)(4)(5) T493X476(1)020(2)(3)(4)(5) T493D686(1)020(2)(3)(4)(5) T493X686(1)020(2)(3)(4)(5) T493A334(1)025(2)(3)(4)(5) T493A474(1)025(2)(3)(4)(5) T493A684(1)025(2)(3)(4)(5) T493B684(1)025(2)(3)(4)(5) T493A105(1)025(2)(3)(4)(5) T493B105(1)025(2)(3)(4)(5) T493A155(1)025(2)(3)(4)(5) T493B155(1)025(2)(3)(4)(5) T493A225(1)025(2)(3)(4)(5) T493B225(1)025(2)(3)(4)(5) T493C225(1)025(2)(3)(4)(5) T493B335(1)025(2)(3)(4)(5) T493C335(1)025(2)(3)(4)(5) T493A475(1)025(2)(3)(4)(5) T493B475(1)025(2)(3)(4)(5) T493C475(1)025(2)(3)(4)(5) T493B685(1)025(2)(3)(4)(5) T493C685(1)025(2)(3)(4)(5) T493D685(1)025(2)(3)(4)(5) T493C106(1)025(2)(3)(4)(5) T493D106(1)025(2)(3)(4)(5) T493C156(1)025(2)(3)(4)(5) T493D156(1)025(2)(3)(4)(5) T493X156(1)025(2)(3)(4)(5) T493C226(1)025(2)(3)(4)(5) T493D226(1)025(2)(3)(4)(5) T493X226(1)025(2)(3)(4)(5) T493D336(1)025(2)(3)(4)(5) T493X336(1)025(2)(3)(4)(5) T493D476(1)025(2)(3)(4)(5) T493X476(1)025(2)(3)(4)(5) T493X686(1)025(2)(3)(4)(5) T493E686(1)025(2)(3)(4)(5) T493A104(1)035(2)(3)(4)(5) T493A154(1)035(2)(3)(4)(5) T493A224(1)035(2)(3)(4)(5) T493A334(1)035(2)(3)(4)(5) T493A474(1)035(2)(3)(4)(5) VDC at 85°C µF KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF Standard ESR Low ESR Ultralow ESR µA at +25°C Maximum/ 5 Minutes 3 3 4.4 4.4 6.6 9.4 9.4 13.6 13.6 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1.2 1.2 1.2 1.7 1.7 1.7 2.5 2.5 3.8 3.8 3.8 5.5 5.5 5.5 8.3 8.3 11.8 11.8 17 17 0.5 0.5 0.5 0.5 0.5 µA at +25°C Maximum/ 5 Minutes % at +25°C 120 Hz Maximum 6.0 6.0 6.0 6.0 6.0 6.0 4.0 8.0 6.0 4.0 4.0 4.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 4.0 6.0 6.0 10.0 6.0 8.0 8.0 4.0 4.0 4.0 4.0 4.0 % at +25°C 120 Hz Maximum Ω at 25°C 100 kHz Maximum 1.7 1.0 1.2 0.8 0.8 0.7 0.7 0.7 0.7 15.0 14.0 10.0 7.5 8.0 5.0 10.0 5.0 7.0 4.5 3.5 3.5 2.5 3.1 1.5 2.4 2.8 1.9 1.4 1.5 1.0 1.5 1.0 0.7 0.4 0.8 0.7 0.7 0.7 0.7 0.7 0.3 0.1 20.0 19.0 18.0 15.0 14.0 Ω at 25°C 100 kHz Maximum Ω at 25°C 100 kHz Maximum 0.4 0.35 0.4 0.3 0.2 0.2 0.15 0.2 0.15 10.0 9.0 6.0 5.5 4.0 2.0 3.0 1.5 N/A 1.2 2.2 2.0 1.2 N/A 1.0 0.6 0.7 0.6 1.0 0.5 0.4 0.9 0.35 0.2 .275 0.2 0.23 0.4 0.3 0.2 0.3 N/A N/A 10.0 6.0 6.0 6.0 4.0 Ω at 25°C 100 kHz Maximum Ω at 25°C 100 kHz Maximum 0.38 0.28 N/A 0.18 0.15 0.10 0.10 0.15 0.12 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 1.30 N/A 0.75 N/A N/A 0.58 N/A 0.49 N/A 0.45 N/A N/A 0.28 N/A N/A N/A N/A 0.09 0.18 0.12 0.15 N/A N/A N/A N/A N/A N/A N/A Ω at 25°C 100 kHz Maximum DC Leakage DF Standard ESR Low ESR Ultra-low ESR Maximum Operating Temp MSL °C Reflow Temp ≤ 260°C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 °C Reflow Temp ≤ 260°C Maximum Operating Temp MSL (1) To complete KEMET part number, insert M for ± 20%, K for ± 10% or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert B (0.1%/1,000 Hours), C (0.01%/1,000 Hours) or A = N/A. Designates Reliability Level. (3) To complete KEMET part number, insert B = Gold-plated, C = Hot solder dipped, H = Solder-plated, K = Solder Fused or T = 100% Tin (Sn). Designates Termination Finish. (4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles −55°C +85°C after Weibull 64 = 10 cycles −55°C +85°C before Weibull or 6(X)11, 6(X)12, 6(X)13, 6(X)21, 6(X)22, 6(X)23, 6(X)31, 6(X)32, 6(X)33. Designates screening options. (5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option. Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2007_T493 • 2/14/2020 11 Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO2 (CWR11 Style) Table 1A – Ratings & Part Number Reference cont. Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number VDC at 85°C µF KEMET/EIA (See below for part options) 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 0.47 0.68 0.68 1 1 1.5 1.5 1.5 2.2 2.2 3.3 3.3 4.7 4.7 4.7 6.8 6.8 10 10 10 15 15 15 22 22 33 33 47 47 0.1 0.15 0.15 0.22 0.22 0.33 0.47 0.47 0.68 0.68 1 1 1.5 1.5 2.2 2.2 3.3 4.7 B/3528-21 A/3216-18 B/3528-21 A/3216-18 B/3528-21 A/3216-18 B/3528-21 C/6032-28 B/3528-21 C/6032-28 B/3528-21 C/6032-28 B/3528-21 C/6032-28 D/7343-31 C/6032-28 D/7343-31 C/6032-28 D/7343-31 X/7343-43 C/6032-28 D/7343-31 X/7343-43 D/7343-31 X/7343-43 D/7343-31 X/7343-43 X/7343-43 E/7360-38 A/3216-18 A/3216-18 B/3528-21 A/3216-18 B/3528-21 B/3528-21 B/3528-21 C/6032-28 A/3216-18 C/6032-28 B/3528-21 C/6032-28 C/6032-28 D/7343-31 C/6032-28 D/7343-31 D/7343-31 D/7343-31 T493B474(1)035(2)(3)(4)(5) T493A684(1)035(2)(3)(4)(5) T493B684(1)035(2)(3)(4)(5) T493A105(1)035(2)(3)(4)(5) T493B105(1)035(2)(3)(4)(5) T493A155(1)035(2)(3)(4)(5) T493B155(1)035(2)(3)(4)(5) T493C155(1)035(2)(3)(4)(5) T493B225(1)035(2)(3)(4)(5) T493C225(1)035(2)(3)(4)(5) T493B335(1)035(2)(3)(4)(5) T493C335(1)035(2)(3)(4)(5) T493B475(1)035(2)(3)(4)(5) T493C475(1)035(2)(3)(4)(5) T493D475(1)035(2)(3)(4)(5) T493C685(1)035(2)(3)(4)(5) T493D685(1)035(2)(3)(4)(5) T493C106(1)035(2)(3)(4)(5) T493D106(1)035(2)(3)(4)(5) T493X106(1)035(2)(3)(4)(5) T493C156(1)035(2)(3)(4)(5) T493D156(1)035(2)(3)(4)(5) T493X156(1)035(2)(3)(4)(5) T493D226(1)035(2)(3)(4)(5) T493X226(1)035(2)(3)(4)(5) T493D336M035(2)(3)(4)(5) T493X336(1)035(2)(3)(4)(5) T493X476(1)035(2)(3)(4)(5) T493E476(1)035(2)(3)(4)(5) T493A104(1)050(2)(3)(4)(5) T493A154(1)050(2)(3)(4)(5) T493B154(1)050(2)(3)(4)(5) T493A224(1)050(2)(3)(4)(5) T493B224(1)050(2)(3)(4)(5) T493B334(1)050(2)(3)(4)(5) T493B474(1)050(2)(3)(4)(5) T493C474(1)050(2)(3)(4)(5) T493A684(1)050(2)(3)(4)(5) T493C684(1)050(2)(3)(4)(5) T493B105(1)050(2)(3)(4)(5) T493C105(1)050(2)(3)(4)(5) T493C155(1)050(2)(3)(4)(5) T493D155(1)050(2)(3)(4)(5) T493C225(1)050(2)(3)(4)(5) T493D225(1)050(2)(3)(4)(5) T493D335(1)050(2)(3)(4)(5) T493D475(1)050(2)(3)(4)(5) VDC at 85°C µF KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF Standard ESR Low ESR Ultralow ESR µA at +25°C Maximum/ 5 Minutes 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.8 0.8 1.2 1.2 1.6 1.6 1.6 2.4 2.4 3.5 3.5 3.5 5.3 5.3 5.3 7.7 7.7 11.6 11.6 16.5 16.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.8 0.8 1.1 1.1 1.7 2.4 µA at +25°C Maximum/ 5 Minutes % at +25°C 120 Hz Maximum 4.0 4.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 10.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 % at +25°C 120 Hz Maximum Ω at 25°C 100 kHz Maximum 8.0 10.0 6.5 10.0 5.0 7.5 5.0 4.5 4.0 3.5 3.5 2.5 1.5 2.5 1.5 2.0 1.3 2.0 1.0 0.9 0.45 0.8 0.9 0.7 0.7 0.3 0.6 0.25 0.5 20.0 19.0 16.0 18.0 14.0 10.0 9.0 8.0 7.9 7.0 7.0 5.5 4.5 3.5 3.5 2.5 2.0 1.5 Ω at 25°C 100 kHz Maximum Ω at 25°C 100 kHz Maximum 2.5 6.0 2.5 6.0 2.0 N/A 3.0 2.5 2.5 1.5 1.3 0.8 N/A 0.6 0.7 0.9 0.5 1.2 0.3 0.25 N/A 0.3 0.3 0.4 0.3 N/A 0.3 N/A 0.3 10.0 10.0 10.0 N/A 10.0 2.5 2.0 1.8 N/A 1.6 N/A 1.6 1.5 1.0 1.5 0.8 0.8 0.6 Ω at 25°C 100 kHz Maximum Ω at 25°C 100 kHz Maximum 1.5 N/A N/A N/A 1.5 N/A N/A N/A 1.5 0.75 N/A 0.60 N/A 0.45 N/A N/A 0.40 N/A 0.25 0.18 N/A 0.23 0.20 0.20 0.20 N/A 0.18 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 1.3 N/A N/A N/A 0.60 0.70 0.28 Ω at 25°C 100 kHz Maximum DC Leakage DF Standard ESR Low ESR Ultra-low ESR Maximum Operating Temp MSL °C Reflow Temp ≤ 260°C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 °C Reflow Temp ≤ 260°C Maximum Operating Temp MSL (1) To complete KEMET part number, insert M for ± 20%, K for ± 10% or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert B (0.1%/1,000 Hours), C (0.01%/1,000 Hours) or A = N/A. Designates Reliability Level. (3) To complete KEMET part number, insert B = Gold-plated, C = Hot solder dipped, H = Solder-plated, K = Solder Fused or T = 100% Tin (Sn). Designates Termination Finish. (4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles −55°C +85°C after Weibull 64 = 10 cycles −55°C +85°C before Weibull or 6(X)11, 6(X)12, 6(X)13, 6(X)21, 6(X)22, 6(X)23, 6(X)31, 6(X)32, 6(X)33. Designates screening options. (5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option. Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2007_T493 • 2/14/2020 12 Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO2 (CWR11 Style) Table 1A – Ratings & Part Number Reference cont. Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number VDC at 85°C µF KEMET/EIA (See below for part options) 50 50 50 50 50 63 63 4.7 6.8 6.8 10 15 6.8 10 X/7343-43 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 T493X475(1)050(2)(3)(4)(5) T493D685(1)050(2)(3)(4)(5) T493X685(1)050(2)(3)(4)(5) T493X106(1)050(2)(3)(4)(5) T493X156(1)050(2)(3)(4)(5) T493X685(1)063(2)(3)(4)(5) T493X106(1)063(2)(3)(4)(5) VDC at 85°C µF KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF Standard ESR Low ESR Ultralow ESR µA at +25°C Maximum/ 5 Minutes 2.4 3.4 3.4 5 7.5 4.3 6.3 µA at +25°C Maximum/ 5 Minutes % at +25°C 120 Hz Maximum 4.0 6.0 6.0 6.0 6.0 6.0 6.0 % at +25°C 120 Hz Maximum Ω at 25°C 100 kHz Maximum 0.9 0.6 1.0 0.7 1.0 1.0 0.6 Ω at 25°C 100 kHz Maximum Ω at 25°C 100 kHz Maximum 0.3 0.3 0.5 0.4 N/A 0.6 0.4 Ω at 25°C 100 kHz Maximum Ω at 25°C 100 kHz Maximum N/A N/A N/A N/A N/A 0.3 0.2 Ω at 25°C 100 kHz Maximum DC Leakage DF Standard ESR Low ESR Ultra-low ESR Maximum Operating Temp MSL °C Reflow Temp ≤ 260°C 125 125 125 125 125 125 125 1 1 1 1 1 1 1 °C Reflow Temp ≤ 260°C Maximum Operating Temp MSL (1) To complete KEMET part number, insert M for ± 20%, K for ± 10% or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert B (0.1%/1,000 Hours), C (0.01%/1,000 Hours) or A = N/A. Designates Reliability Level. (3) To complete KEMET part number, insert B = Gold-plated, C = Hot solder dipped, H = Solder-plated, K = Solder Fused or T = 100% Tin (Sn). Designates Termination Finish. (4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles −55°C +85°C after Weibull 64 = 10 cycles −55°C +85°C before Weibull or 6(X)11, 6(X)12, 6(X)13, 6(X)21, 6(X)22, 6(X)23, 6(X)31, 6(X)32, 6(X)33. Designates screening options. (5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option. Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2007_T493 • 2/14/2020 13 Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO2 (CWR11 Style) Table 1B – DLA Drawing 07016, Ratings & Part Number Reference Rated Rated Voltage Cap Case Code/ Case Size VDC at 85°C µF KEMET/EIA 4 4 4 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 16 16 16 16 16 16 16 16 16 16 16 16 33 100 100 3.3 4.7 6.8 10 15 22 22 33 47 68 68 100 150 220 330 330 470 470 4.7 6.8 10 10 15 15 22 22 22 33 33 33 47 47 68 68 100 220 220 330 330 470 470 2.2 3.3 3.3 4.7 6.8 6.8 10 10 15 15 22 22 A/3216-18 A/3216-18 B/3528-20 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-20 B/3528-20 C/6032-28 B/3528-20 C/6032-28 C/6032-28 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-20 B/3528-20 B/3528-20 C/6032-28 B/3528-20 B/3528-20 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 C/6032-28 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-20 A/3216-18 B/3528-20 B/3528-20 B/3528-20 B/3528-20 C/6032-28 VDC at 85°C µF KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DLA DC Drawing 07016 Leakage Part Number DF Maximum Standard Operating ESR Temp (See page 2 for Ordering Information) T493A336(1)004(2)(3)(4)20 T493A107(1)004(2)(3)(4)10 T493B107(1)004(2)(3)(4)20 T493A335(1)006(2)(3)(4)10 T493A475(1)006(2)(3)(4)10 T493A685(1)006(2)(3)(4)20 T493A106(1)006(2)(3)(4)10 T493A156(1)006(2)(3)(4)20 T493A226(1)006(2)(3)(4)20 T493B226(1)006(2)(3)(4)20 T493B336(1)006(2)(3)(4)20 T493C476(1)006(2)(3)(4)20 T493B686(1)006(2)(3)(4)10 T493C686(1)006(2)(3)(4)20 T493C107(1)006(2)(3)(4)30 T493D157(1)006(2)(3)(4)10 T493D227(1)006(2)(3)(4)20 T493X337(1)006(2)(3)(4)10 T493X337(1)006(2)(3)(4)20 T493X477M006(2)(3)(4)10 T493X477M006(2)(3)(4)20 T493A475(1)010(2)(3)(4)20 T493A685(1)010(2)(3)(4)20 T493A106(1)010(2)(3)(4)10 T493A106(1)010(2)(3)(4)20 T493A156(1)010(2)(3)(4)30 T493B156(1)010(2)(3)(4)20 T493B226(1)010(2)(3)(4)10 T493B226(1)010(2)(3)(4)20 T493C226(1)010(2)(3)(4)30 T493B336(1)010(2)(3)(4)10 T493B336(1)010(2)(3)(4)20 T493C336(1)010(2)(3)(4)20 T493C476(1)010(2)(3)(4)10 T493C476(1)010(2)(3)(4)20 T493C686(1)010(2)(3)(4)20 T493D686(1)010(2)(3)(4)30 T493C107(1)010(2)(3)(4)10 T493D227(1)010(2)(3)(4)30 T493X227(1)010(2)(3)(4)30 T493X337(1)010(2)(3)(4)20 T493X337(1)010(2)(3)(4)30 T493X477M010(2)(3)(4)10 T493X477M010(2)(3)(4)20 T493A225(1)016(2)(3)(4)30 T493A335(1)016(2)(3)(4)10 T493A335(1)016(2)(3)(4)20 T493A475(1)016(2)(3)(4)10 T493A685(1)016(2)(3)(4)10 T493B685(1)016(2)(3)(4)20 T493A106(1)016(2)(3)(4)10 T493B106(1)016(2)(3)(4)20 T493B156(1)016(2)(3)(4)10 T493B156(1)016(2)(3)(4)20 T493B226(1)016(2)(3)(4)10 T493C226(1)016(2)(3)(4)20 (See page 2 for Ordering Information) (See page 2 for Ordering Information) 07016-001(1)(2)(3)(4) 07016-003(1)(2)(3)(4) 07016-004(1)(2)(3)(4) 07016-006(1)(2)(3)(4) 07016-007(1)(2)(3)(4) 07016-008(1)(2)(3)(4) 07016-009(1)(2)(3)(4) 07016-010(1)(2)(3)(4) 07016-011(1)(2)(3)(4) 07016-012(1)(2)(3)(4) 07016-013(1)(2)(3)(4) 07016-014(1)(2)(3)(4) 07016-015(1)(2)(3)(4) 07016-016(1)(2)(3)(4) 07016-017(1)(2)(3)(4) 07016-019(1)(2)(3)(4) 07016-020(1)(2)(3)(4) 07016-021(1)(2)(3)(4) 07016-022(1)(2)(3)(4) 07016-023M(2)(3)(4) 07016-024M(2)(3)(4) 07016-026(1)(2)(3)(4) 07016-027(1)(2)(3)(4) 07016-028(1)(2)(3)(4) 07016-029(1)(2)(3)(4) 07016-030(1)(2)(3)(4) 07016-032(1)(2)(3)(4) 07016-033(1)(2)(3)(4) 07016-034(1)(2)(3)(4) 07016-035(1)(2)(3)(4) 07016-037(1)(2)(3)(4) 07016-038(1)(2)(3)(4) 07016-039(1)(2)(3)(4) 07016-040(1)(2)(3)(4) 07016-041(1)(2)(3)(4) 07016-042(1)(2)(3)(4) 07016-044(1)(2)(3)(4) 07016-045(1)(2)(3)(4) 07016-049(1)(2)(3)(4) 07016-051(1)(2)(3)(4) 07016-054(1)(2)(3)(4) 07016-055(1)(2)(3)(4) 07016-057M(2)(3)(4) 07016-058M(2)(3)(4) 07016-060(1)(2)(3)(4) 07016-061(1)(2)(3)(4) 07016-062(1)(2)(3)(4) 07016-063(1)(2)(3)(4) 07016-064(1)(2)(3)(4) 07016-065(1)(2)(3)(4) 07016-066(1)(2)(3)(4) 07016-067(1)(2)(3)(4) 07016-068(1)(2)(3)(4) 07016-069(1)(2)(3)(4) 07016-070(1)(2)(3)(4) 07016-071(1)(2)(3)(4) (See page 2 for Ordering Information) µA at +25°C Max/5 Min 1.3 4.0 4.0 0.5 0.5 0.5 0.6 0.9 1.4 1.4 2.1 3.0 4.3 4.3 6.3 9.5 13.9 20.8 20.8 29.6 29.6 0.5 0.7 1.0 1.0 1.5 1.5 2.2 2.2 2.2 3.3 3.3 3.3 4.7 4.7 6.8 6.8 10.0 22.0 22.0 33.0 33.0 47.0 47.0 0.5 0.5 0.5 0.8 1.1 1.1 1.6 1.6 2.4 2.4 3.6 3.5 µA at +25°C Max/5 Min % at +25°C 120 Hz Max 6.0 30.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 6.0 6.0 6.0 8.0 8.0 8.0 10.0 10.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 6.0 8.0 8.0 8.0 8.0 8.0 10.0 10.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 % at +25°C 120 Hz Max Ω at+25°C 100 kHz Max 3.0 1.4 0.9 8.0 6.0 5.0 4.0 3.5 3.0 0.6 0.6 0.3 0.5 0.2 0.15 0.125 0.1 0.1 0.05 0.20 0.05 5.0 4.0 3.0 1.8 3.2 0.6 0.7 0.5 0.3 0.6 0.425 0.5 0.3 0.2 0.3 0.15 0.2 0.15 0.05 0.1 0.05 0.2 0.05 5.5 5.0 3.5 2.0 1.5 1.2 3.0 0.9 0.8 0.5 0.6 0.375 Ω at+25°C 100 kHz Max 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 KEMET Part Number DLA Drawing 07016 Part Number DC Leakage DF Standard ESR Maximum Operating Temp © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com °C °C MSL Reflow Temp ≤ 260°C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp ≤ 260°C MSL T2007_T493 • 2/14/2020 14 Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO2 (CWR11 Style) Table 1B – DLA Drawing 07016, Ratings & Part Number Reference cont. Rated Rated Voltage Cap Case Code/ Case Size VDC at 85°C µF KEMET/EIA 16 16 16 16 16 16 16 16 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 35 35 35 35 35 35 35 35 35 35 35 33 47 68 100 150 150 150 220 1.5 2.2 4.7 4.7 4.7 6.8 10 10 10 15 22 33 47 68 68 0.68 1 1.5 1.5 2.2 2.2 3.3 4.7 4.7 4.7 4.7 6.8 10 10 22 22 22 33 33 47 47 68 0.47 0.68 1 1.5 1.5 2.2 4.7 4.7 6.8 6.8 10 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 E/7360-38 E/7360-38 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-20 B/3528-20 B/3528-20 B/3528-20 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 X/7343-43 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-20 B/3528-20 A/3216-18 B/3528-20 B/3528-20 B/3528-20 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 E/7360-38 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-20 B/3528-20 B/3528-20 D/7343-31 C/6032-28 D/7343-31 C/6032-28 VDC at 85°C µF KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DLA DC Drawing 07016 Leakage Part Number DF Maximum Standard Operating ESR Temp (See page 2 for Ordering Information) T493C336(1)016(2)(3)(4)20 T493C476(1)016(2)(3)(4)30 T493D686(1)016(2)(3)(4)30 T493D107(1)016(2)(3)(4)20 T493D157M016(2)(3)(4)20 T493D157M016(2)(3)(4)30 T493E157(1)016(2)(3)(4)10 T493E227(1)016(2)(3)(4)10 T493A155(1)020(2)(3)(4)20 T493A225(1)020(2)(3)(4)10 T493A475(1)020(2)(3)(4)10 T493A475(1)020(2)(3)(4)20 T493B475(1)020(2)(3)(4)20 T493B685(1)020(2)(3)(4)20 T493B106(1)020(2)(3)(4)10 T493B106(1)020(2)(3)(4)20 T493C106(1)020(2)(3)(4)20 T493C156(1)020(2)(3)(4)20 T493C226(1)020(2)(3)(4)20 T493D336(1)020(2)(3)(4)20 T493D476(1)020(2)(3)(4)20 T493D686(1)020(2)(3)(4)20 T493X686(1)020(2)(3)(4)20 T493A684(1)025(2)(3)(4)10 T493A105(1)025(2)(3)(4)10 T493A155(1)025(2)(3)(4)10 T493A155(1)025(2)(3)(4)20 T493A225(1)025(2)(3)(4)10 T493B225(1)025(2)(3)(4)20 T493B335(1)025(2)(3)(4)20 T493A475(1)025(2)(3)(4)10 T493B475(1)025(2)(3)(4)10 T493B475(1)025(2)(3)(4)20 T493B475(1)025(2)(3)(4)30 T493C685(1)025(2)(3)(4)20 T493C106(1)025(2)(3)(4)10 T493C106(1)025(2)(3)(4)20 T493C226(1)025(2)(3)(4)10 T493C226(1)025(2)(3)(4)20 T493D226(1)025(2)(3)(4)20 T493D336(1)025(2)(3)(4)20 T493D336(1)025(2)(3)(4)30 T493D476(1)025(2)(3)(4)20 T493D476(1)025(2)(3)(4)30 T493E686(1)025(2)(3)(4)10 T493A474(1)035(2)(3)(4)20 T493A684(1)035(2)(3)(4)20 T493A105(1)035(2)(3)(4)20 T493A155(1)035(2)(3)(4)10 T493B155(1)035(2)(3)(4)10 T493B225(1)035(2)(3)(4)30 T493B475(1)035(2)(3)(4)10 T493D475(1)035(2)(3)(4)10 T493C685(1)035(2)(3)(4)10 T493D685(1)035(2)(3)(4)30 T493C106(1)035(2)(3)(4)20 (See page 2 for Ordering Information) (See page 2 for Ordering Information) 07016-074(1)(2)(3)(4) 07016-076(1)(2)(3)(4) 07016-079(1)(2)(3)(4) 07016-080(1)(2)(3)(4) 07016-082M(1)(2)(3)(4) 07016-083M(1)(2)(3)(4) 07016-084(1)(2)(3)(4) 07016-085(1)(2)(3)(4) 07016-086(1)(2)(3)(4) 07016-087(1)(2)(3)(4) 07016-088(1)(2)(3)(4) 07016-089(1)(2)(3)(4) 07016-090(1)(2)(3)(4) 07016-091(1)(2)(3)(4) 07016-092(1)(2)(3)(4) 07016-093(1)(2)(3)(4) 07016-094(1)(2)(3)(4) 07016-096(1)(2)(3)(4) 07016-098(1)(2)(3)(4) 07016-100(1)(2)(3)(4) 07016-102(1)(2)(3)(4) 07016-104(1)(2)(3)(4) 07016-106(1)(2)(3)(4) 07016-108M(1)(2)(3)(4) 07016-109(1)(2)(3)(4) 07016-110(1)(2)(3)(4) 07016-111(1)(2)(3)(4) 07016-112(1)(2)(3)(4) 07016-113(1)(2)(3)(4) 07016-114(1)(2)(3)(4) 07016-115(1)(2)(3)(4) 07016-118(1)(2)(3)(4) 07016-116(1)(2)(3)(4) 07016-119(1)(2)(3)(4) 07016-120(1)(2)(3)(4) 07016-121(1)(2)(3)(4) 07016-122(1)(2)(3)(4) 07016-123(1)(2)(3)(4) 07016-124(1)(2)(3)(4) 07016-125(1)(2)(3)(4) 07016-127(1)(2)(3)(4) 07016-128(1)(2)(3)(4) 07016-130M(1)(2)(3)(4) 07016-131M(1)(2)(3)(4) 07016-132(1)(2)(3)(4) 07016-133M(1)(2)(3)(4) 07016-134M(1)(2)(3)(4) 07016-135(1)(2)(3)(4) 07016-136(1)(2)(3)(4) 07016-137(1)(2)(3)(4) 07016-138(1)(2)(3)(4) 07016-140(1)(2)(3)(4) 07016-141(1)(2)(3)(4) 07016-142(1)(2)(3)(4) 07016-143(1)(2)(3)(4) 07016-144(1)(2)(3)(4) (See page 2 for Ordering Information) µA at +25°C Max/5 Min 5.3 7.5 10.9 16.0 24.0 24.0 24.0 35.2 0.5 0.5 0.9 0.9 0.9 1.4 2.0 0.7 2.0 3.0 4.4 6.6 9.4 13.6 13.6 0.5 0.5 0.5 0.5 0.5 0.6 0.8 1.2 1.7 1.2 1.2 1.7 2.5 2.5 5.5 5.5 5.5 8.3 8.3 11.8 11.8 17.0 0.5 0.5 0.5 0.5 0.5 0.8 1.6 1.6 2.4 2.4 3.5 µA at +25°C Max/5 Min % at +25°C 120 Hz Max 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 % at +25°C 120 Hz Max Ω at+25°C 100 kHz Max 0.3 0.35 0.15 0.125 0.15 0.06 0.05 0.05 6.5 3.0 4.0 1.8 1.0 1.0 1.0 0.5 0.7 0.4 0.4 0.2 0.2 0.2 0.2 10.0 8.0 7.5 3.0 7.0 2.0 2.0 3.1 2.8 1.5 0.7 0.7 0.5 0.3 0.4 0.275 0.2 0.3 0.09 0.25 0.175 0.1 12.0 8.0 7.5 7.5 5.2 2.0 1.5 0.45 0.35 0.4 1.6 Ω at+25°C 100 kHz Max 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 KEMET Part Number DLA Drawing 07016 Part Number DC Leakage DF Standard ESR Maximum Operating Temp © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com °C °C MSL Reflow Temp ≤ 260°C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp ≤ 260°C MSL T2007_T493 • 2/14/2020 15 Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO2 (CWR11 Style) Table 1B – DLA Drawing 07016, Ratings & Part Number Reference cont. Rated Rated Voltage Cap Case Code/ Case Size VDC at 85°C µF KEMET/EIA 35 35 35 35 35 35 35 35 35 50 50 50 50 50 50 50 50 50 50 50 50 50 15 15 15 22 33 33 33 47 47 0.15 0.22 0.47 0.68 1 1.5 1.5 2.2 3.3 4.7 6.8 6.8 6.8 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 E/7360-38 A/3216-18 A/3216-18 B/3528-20 A/3216-18 B/3528-20 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 VDC at 85°C µF KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DLA DC Drawing 07016 Leakage Part Number DF Maximum Standard Operating ESR Temp (See page 2 for Ordering Information) T493C156(1)035(2)(3)(4)10 T493D156(1)035(2)(3)(4)10 T493D156(1)035(2)(3)(4)20 T493D226(1)035(2)(3)(4)20 T493D336M035(2)(3)(4)10 T493D336M035(2)(3)(4)20 T493X336(1)035(2)(3)(4)20 T493X476M035(2)(3)(4)10 T493E476M035(2)(3)(4)10 T493A154(1)050(2)(3)(4)20 T493A224M050(2)(3)(4)10 T493B474(1)050(2)(3)(4)20 T493A684(1)050(2)(3)(4)10 T493B105(1)050(2)(3)(4)10 T493C155(1)050(2)(3)(4)20 T493D155(1)050(2)(3)(4)20 T493D225(1)050(2)(3)(4)20 T493D335(1)050(2)(3)(4)20 T493D475(1)050(2)(3)(4)30 T493D685(1)050(2)(3)(4)10 T493D685(1)050(2)(3)(4)20 T493X685(1)050(2)(3)(4)20 (See page 2 for Ordering Information) (See page 2 for Ordering Information) 07016-146(1)(2)(3)(4) 07016-147(1)(2)(3)(4) 07016-148(1)(2)(3)(4) 07016-149(1)(2)(3)(4) 07016-152M(2)(3)(4) 07016-153M(2)(3)(4) 07016-154M(1)(2)(3)(4) 07016-155M(1)(2)(3)(4) 07016-156M(1)(2)(3)(4) 07016-157M(1)(2)(3)(4) 07016-158M(1)(2)(3)(4) 07016-160(1)(2)(3)(4) 07016-161(1)(2)(3)(4) 07016-163(1)(2)(3)(4) 07016-164(1)(2)(3)(4) 07016-165(1)(2)(3)(4) 07016-166(1)(2)(3)(4) 07016-167(1)(2)(3)(4) 07016-168(1)(2)(3)(4) 07016-169(1)(2)(3)(4) 07016-170(1)(2)(3)(4) 07016-171(1)(2)(3)(4) (See page 2 for Ordering Information) µA at +25°C Max/5 Min 5.3 5.3 5.3 7.7 11.6 11.6 11.6 16.5 16.5 0.5 0.5 0.5 0.5 0.5 0.8 0.8 1.1 1.7 2.4 3.4 3.4 3.4 µA at +25°C Max/5 Min % at +25°C 120 Hz Max 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 4.0 4.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 % at +25°C 120 Hz Max Ω at+25°C 100 kHz Max 0.45 0.3 0.1 0.4 0.3 0.2 0.3 0.25 0.20 15.0 18.0 9.5 7.9 7.0 2.0 1.5 1.2 0.8 0.3 0.6 0.3 0.4 Ω at+25°C 100 kHz Max 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 KEMET Part Number DLA Drawing 07016 Part Number DC Leakage DF Standard ESR Maximum Operating Temp © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com °C °C MSL Reflow Temp ≤ 260°C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp ≤ 260°C MSL T2007_T493 • 2/14/2020 16 Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO2 (CWR11 Style) Recommended Voltage Derating Guidelines 85°C to 125°C VR 67% of VR 50% of VR 33% of VR 120% 100% % Working Voltage % Change in working DC voltage with temperature Recommended maximum application voltage −55°C to 85°C 80% % Change in Working DC Voltage with Temperature 67% 60% 40% 20% 0% −55 Recommended Maximum Application Voltage (As % of Rated Voltage) 25 33% 85 Temperature (ºC) 125 Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device. Permissible AC ripple voltage which may be applied is limited by two criteria: 1. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. 2. The negative peak AC voltage in combination with bias voltage, if any, must not exceed the allowable limits specified for reverse voltage. See the Reverse Voltage section for allowable limits. The maximum power dissipation by case size can be determined using the table at right. The maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. Refer to the table below for temperature compensation requirements. Temperature Compensation Multipliers for Maximum Ripple Current T ≤ 25°C 1.00 T ≤ 85°C 0.90 T ≤ 125°C 0.40 T= Environmental Temperature The maximum power dissipation rating must be reduced with increasing environmental operating temperatures. Refer to the Temperature Compensation Multiplier table for details. KEMET Case Code EIA Case Code Maximum Power Dissipation (Pmax) mWatts at 25°C with +20°C Rise A B C D X E S T U V T510X T510E 3216–18 3528–21 6032–28 7343–31 7343–43 7360–38 3216–12 3528–12 6032–15 7343–20 7343–43 7360–38 75 85 110 150 165 200 60 70 90 125 270 285 Using the Pmax of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = √Pmax/R E(max) = Z √Pmax/R I = rms ripple current (amperes) E = rms ripple voltage (volts) Pmax = maximum power dissipation (watts) R = ESR at specified frequency (ohms) Z = Impedance at specified frequency (ohms) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2007_T493 • 2/14/2020 17 Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO2 (CWR11 Style) Reverse Voltage Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Permissible Transient Reverse Voltage 25°C 85°C 125°C 15% of Rated voltage 5% of Rated voltage 1% of Rated voltage Table 2 – Land Dimensions/Courtyard KEMET Metric Size Code Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Case EIA W L S V1 V2 W L S V1 V2 W L S V1 V2 A 3216–18 1.35 2.20 0.62 6.02 2.80 1.23 1.80 0.82 4.92 2.30 1.13 1.42 0.98 4.06 2.04 B 3528–21 2.35 2.21 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 C 6032–28 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 D 7343–31 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 E 1 7360–38 3.25 2.77 3.67 10.22 7.30 3.13 2.37 3.87 9.12 6.80 3.03 1.99 4.03 8.26 6.54 X1 7343–43 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351). 1 Height of these chips may create problems in wave soldering. 2 Land pattern geometry is too small for silkscreen outline. V1 L L W W V2 S Grid Placement Courtyard © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2007_T493 • 2/14/2020 18 Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO2 (CWR11 Style) Soldering Process The KEMET families of surface mount capacitors are compatible with wave (single or dual), convection, IR, or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J–STD–020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. Please note that although the X/7343–43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Profile Feature SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Minimum (TSmin) 100°C 150°C Temperature Maximum (TSmax) 150°C 200°C Time (ts) from Tsmin to Tsmax) 60 – 120 seconds 60 – 120 seconds Ramp-up Rate (TL to TP) 3°C/second maximum 3°C/second maximum Liquidous Temperature (TL) 183°C 217°C Time Above Liquidous (tL) 60 – 150 seconds 220°C* 235°C** 60 – 150 seconds 250°C* 260°C** 20 seconds maximum 30 seconds maximum 6°C/second maximum 6°C/second maximum 6 minutes maximum 8 minutes maximum Peak Temperature (TP) Time within 5°C of Maximum Peak Temperature (tP) Ramp-down Rate (TP to TL) Time 25°C to Peak Temperature Note: All temperatures refer to the center of the package, measured on the During typical reflow operations, a slight darkening of the gold-colored epoxy may be observed. This slight darkening is normal and not harmful to the product. Marking permanency is not affected by this change. Temperature Hand soldering should be performed with care due to the package body surface that is facing up during assembly reflow. difficulty in process control. If performed, care should be * For Case Size height > 2.5 mm ** For Case Size height ≤ 2.5 mm taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow TP tP Maximum Ramp-up Rate = 3°C/second occurs. Once reflow occurs, the iron should be removed Maximum Ramp-down Rate = 6°C/second TL immediately. “Wiping” the edges of a chip and heating the top tL surface is not recommended. Tsmax Tsmin 25 ts 25°C to Peak Time Storage Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature – reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability, chip stock should be used promptly, preferably within three years of receipt. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2007_T493 • 2/14/2020 19 Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO2 (CWR11 Style) Construction Polarity Stripe (+) Molded Epoxy Case Detailed Cross Section Silver Paint (Fourth Layer) Polarity Bevel (+) Tantalum Wire Leadframe (− Cathode) Washer Tantalum Wire Weld (to attach wire) Carbon (Third Layer) Silver Adhesive Leadframe (+ Anode) Molded Epoxy Case MnO2 (Second Layer) Washer Ta2O5 Dielectric (First Layer) Tantalum Capacitor Marking Date Code * KEMET Military COTS Polarity Indicator (+) 1 digit = last number of year 2 = 2012 3 = 2013 4 = 2014 5 = 2015 6 = 2016 7 = 2017 2nd and 3rd digit = week of the year 01 = 1st week of the year to 52 = 52nd week of the year st Picofarad Code KEMET ID Rated Voltage Date Code* * 230 = 30th week of 2012 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2007_T493 • 2/14/2020 20 Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO2 (CWR11 Style) Tape & Reel Packaging Information KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. Right hand orientation only (+) Embossed carrier (−) Embossment Top tape thickness 0.10 mm (0.004”) maximum thickness 180 mm (7.0”) or 330 mm (13.”) 8 mm (0.315”) or 12 mm (0.472”) Table 3 – Packaging Quantity Case Code KEMET S T M U L W Z V A B C D Q Y X E/T428P H O EIA 3216-12 3528-12 3528-15 6032-15 6032-19 7343-15 7343-17 7343-20 3216-18 3528-21 6032-28 7343-31 7343-12 7343-40 7343-43 7360-38 7360-20 7360-43 Tape Width (mm) 7" Reel* 13" Reel* 8 8 8 12 12 12 12 12 8 8 12 12 12 12 12 12 12 12 2,500 3,000 2,500 1,000 1,000 1,000 1,000 1,000 2,000 2,000 500 500 1,000 500 500 500 1,000 250 10,000 10,000 8,000 5,000 3,000 3,000 3,000 3,000 9,000 8,000 3,000 2,500 3,000 2,000 2,000 2,000 2,500 1,000 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2007_T493 • 2/14/2020 21 Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO2 (CWR11 Style) Figure 1 – Embossed (Plastic) Carrier Tape Dimensions P2 T T2 ØD0 P0 (10 pitches cumulative tolerance on tape ±0.2 mm) A0 E1 F K0 B1 E2 B0 S1 W P1 T1 Center Lines of Cavity B1 is for tape feeder reference only, including draft concentric about B0. Embossment For cavity size, see Note 1, Table 4 ØD1 Cover Tape User Direction of Unreeling Table 4 – Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size 8 mm 12 mm D1 Minimum Note 1 D0 1.5 +0.10/−0.0 (0.059 +0.004/−0.0) 1.0 (0.039) 1.5 (0.059) E1 P0 R Reference S1 Minimum T1 T Maximum Note 2 Note 3 Maximum P2 1.75 ±0.10 4.0 ±0.10 2.0 ±0.05 (0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002) 25.0 (0.984) 30 (1.181) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) Variable Dimensions — Millimeters (Inches) Tape Size Pitch B1 Maximum Note 4 8 mm Single (4 mm) 4.35 (0.171) 6.25 (0.246) 12 mm Single (4 mm) and Double (8 mm) 8.2 (0.323) 10.25 (0.404) E2 Minimum F P1 3.5 ±0.05 2.0 ±0.05 or 4.0 ±0.10 (0.138 ±0.002) (0.079 ±0.002 or 0.157 ±0.004) 2.0 ±0.05 (0.079 ±0.002) or 5.5 ±0.05 4.0 ±0.10 (0.157 ±0.004) or (0.217 ±0.002) 8.0 ±0.10 (0.315 ±0.004) T2 Maximum W Maximum A0, B0 & K0 2.5 (0.098) 8.3 (0.327) 4.6 (0.181) 12.3 (0.484) Note 5 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 4). 3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape (see Figure 3). (e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2007_T493 • 2/14/2020 22 Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO2 (CWR11 Style) Packaging Information Performance Notes 1. Cover tape break force: 1.0 kg minimum. 2. Cover tape peel strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 mm 0.1 to 1.3 newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 2 – Maximum Component Rotation ° T Maximum Component Rotation Top View Maximum Component Rotation Side View Typical Pocket Centerline Tape Width (mm) 8, 12 Bo Maximum Rotation ( 20 ° T) ° s Tape Maximum Width (mm) Rotation ( 8, 12 20 Typical Component Centerline ° S) Ao Figure 3 – Maximum Lateral Movement Figure 4 – Bending Radius 8 mm & 12 mm Tape 0.5 mm maximum 0.5 mm maximum Embossed Carrier Punched Carrier R © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Bending Radius R T2007_T493 • 2/14/2020 23 Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO2 (CWR11 Style) Figure 5 – Reel Dimensions Full Radius, See Note W3 (Includes flange distortion at outer edge) Access Hole at Slot Location (Ø 40 mm minimum) W2 D A (See Note) N C (Arbor hole diameter) B (see Note) (Measured at hub) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 5 – Reel Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178 ±0.20 (7.008 ±0.008) or 330 ±0.20 (13.000 ±0.008) 1.5 (0.059) 13.0 +0.5/−0.2 (0.521 +0.02/−0.008) 20.2 (0.795) 12 mm Variable Dimensions — Millimeters (Inches) Tape Size 8 mm 12 mm N Minimum W1 W2 Maximum W3 50 (1.969) 8.4 +1.5/−0.0 (0.331 +0.059/−0.0) 12.4 +2.0/−0.0 (0.488 +0.078/−0.0) 14.4 (0.567) 18.4 (0.724) Shall accommodate tape width without interference © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2007_T493 • 2/14/2020 24 Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO2 (CWR11 Style) Figure 6 – Tape Leader & Trailer Dimensions Embossed Carrier Punched Carrier 8 mm & 12 mm only END Carrier Tape Round Sprocket Holes START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm minimum Components 100 mm minimum Leader 400 mm minimum Top Cover Tape Figure 7 – Maximum Camber Elongated Sprocket Holes (32 mm & wider tapes) Carrier Tape Round Sprocket Holes 1 mm maximum, either direction Straight Edge 250 mm © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2007_T493 • 2/14/2020 25 Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO2 (CWR11 Style) KEMET Electronics Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2007_T493 • 2/14/2020 26