SOLID TANTALUM CHIP CAPACITORS
T493 SERIES—Military COTS
Features FEATURES
• Standard Cases Sizes A - X per EIA535BAAC • Termination Finishes offered per MIL-PRF-55365: Gold Plated, Hot Solder Dipped, Solder Plated, Solder Fused, 100% Tin • Weibull Grading Available: B (0.1%/1000hrs) and C (0.01%/1000hrs) • Surge Current Testing Available per MIL-PRF-55365: 10 cycles @ +25°C; 10 cycles @ -55°C and +85°C • Standard and Low ESR Options • Operating Temperature Range: -55°C to +125°C • Capacitance: 0.1 to 330µF • Voltage: 4 to 50 Volts
OUTLINE DRAWING Outline Drawing
CATHODE (-) END VIEW W SIDE VIEW B B H K X S T G S
Termination Notch at KEMETs Option, Either End
ANODE (+) END VIEW
BOTTOM VIEW
E A L
F
DIMENSIONS- MILLIMETERS (INCHES) Dimensions - Millimeters (Inches)
Case Size Case Size KEMET EIA KEMET EIA/IECQ A 3216-18 L W H K ±0.20
L
3.2 ± 0.2 (.126 ± .008) 3.2 ± 0.2
W
H
B ±0.15±0.3 B ±0.15 P (Ref) R (Ref) F±0.20 S ±0.3 ±0.1 ±0.1 X (Ref) (Ref) ±(.006) K ±(.008) F ±(.004) S ±(.012) (Ref) ±.006 X(Ref) 1.2 0.8 (.047) 0.9(.031) 1.2 2.2 (.035) (.087) 1.1 2.2 (.043) (.087) 1.4 2.4 (.055) (.094) 1.5 2.4 (.094) (.059) 4.1 2.3 (.161) (.091) 0.4 (.016)0.8 0.10 ± 0.10 (.004 ± .004) 0.4 0.4 0.4 (.016) (.016) 0.10 ± 0.10 0.5 (.004 ± 1.0 .004) (.020) (.039)
A (Min) 1.4 (.055) 0.13
G (Ref) 1.1 (.043)
E (Ref) 1.3
T(Ref) A(Min) G(ref) E(ref) 1.4(.051) 1.3 1.1 1.8 (.055) 2.2 (.043) (.051) (.071) 2.1(.087) 2.2 1.8 2.8 2.4 (.083) (.071) (.087) (.110) (.094) 3.1 2.8 2.4 3.5 3.5 (.122) (.110) (.094) (.138) (.138) 3.8 3.5 3.5 3.5 3.5 (.138) (.138) (.150) (.138) (.138) 3.5 3.5 3.5 3.5 3.8 (.138) (.138) (.150) (.138) (.138)
A
B
3216-18
3528-21 C D X E
1.6 ± 0.2 1.6 ± 0.2 0.9 (.063 ± .008) (.063 ± .008) ± 0.2 1.6 ± 0.2 1.6 (.035)
B C D X
3.5 ± 2.8 ± 0.2 1.9 ± 0.1 1.1 (.126 ± 0.2 .008) (.063 ± .008) (.063 ± .008) (.138 ± .008) (.110 ± .008) (.075 ± .008) (.043) 3.5 ± 0.2 2.8 ± 0.2 1.9 ± 0.2 6032-28 6.0 ± 0.3 3.2 ± 0.3 2.5 ± 0.3 1.4 (.138 ± .012) (.126 ± .12).008) ± .012) ± .008) .008) (.110 ± (.075 (.055) (.236 ± .098 6032-28 6.0 ± 0.3 3.2 ± 2.5 7343-31 7.3 ± 0.3 4.3 ± 0.3 0.3 2.8 ± 0.3 ± 0.3 1.5 (.236 ± .012) (.169 ± .012) (.110 (.098 ± .012) (.287 ± .012) (.126 ± .012) ± .012) (.059) 7343-31 7.3 ± 0.3 4.3 ± 2.8 7343-43 7.3 ± 0.3 4.3 ± 0.3 0.3 4.0 ± 0.3 ± 0.3 2.3 (.287 .012) (.169 ± .012) ± .012) (.091) (.287 ± .012) (.169 ± .012) (.157 (.110 ± .012) 7260-38 7.3 ± 0.3 6.0 ± 0.3 0.3 3.6 ± 0.2 ± 0.3 2.3 7343-43 7.3 ± 0.3 4.3 ± 4.0 (.287 ± .01 (.287 ± .012)2) (.236± .012) (.142 (.157 ± .012) (.169 ± .012) ± .008) (.091)
3528-21
0.8 (.047) 0.4 (.031) 0.10 ± 0.10 (.016) (.031) (.016) (.004 ± .004)
2.2 1.3 (.087) (.051) 1.3 2.2 (.087) (.051) 1.3 2.4 (.051) (.094) 1.3 2.4 (.051) (.094)
0.8 0.4 0.5 0.10 ± 0.10 (.031) (.004 ± .004) (.016) (.020) 0.5 0.5 1.3 0.10 ± 0.10 (.051) (.004 ± .004) (.020) (.020) 1.3 ± 0.10 0.5 0.10 0.5 (.020) (.051) (.004 ± .004) (.020) 0.5 1.3 0.10 ± 0.10 0.5 (.020) (.051) ±(.020) (.004 .004)
2.1 (.005) (.083) 0.10 ± 0.10 0.13 0.9 1.0 3.1 (.004 ± .004) (.005) (.0235) (.039) (.122) 0.10 ± 1.0 0.10 0.13 0.9 3.8 (.004 ± .004) (.005) (.0235) (.039) (.150) 0.10 ± 0.103.8 0.13 1.7 1.0 (.067) (.039) (.150) (.004 ± .004) (.005) 0.9 3.8 0.10 ± 1.0 0.10 0.13 (.035) (.004 (.039) ± .004) (.150) (.005)
Notes:
1. Metric dimensions govern. 2. (ref) - Dimensions provided for reference only.
COMPONENT MARKING Component Marking
(+) KEMET T493 COTS Rated Voltage
+ 336 20 K 515 315
Polarity Indicator Picofarad Code KEMET ID
1st Digit = Year 2nd & 3rd Digit + Week 315 = 15th Week of 2003 “515 = 15th week of 2005
Print Week Code
22
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
SOLID TANTALUM CHIP CAPACITORS
T493 SERIES—Military COTS
T
Tantalum Series
T493 Military Commercial Off-The-Shelf
493
ORDERING INFORMATION
D 227 K 006 C H 6120
ESR/Surge Designator
First 2 Numbers 61 = Surge - None 62 = Surge - 10 Cycles, +25°C 64 = Surge - 10 cycles, -55°C and +85°C Second 2 Numbers 10 = ESR - Standard 20 = ESR - Low 30 = ESR - Ultra-low
Note: For order entry purposes the last 4-digits of the part number will be entered in the KEMET Customer Specification (C-Spec)Field.
Case Size
A, B, C, D, X
Capacitance Picofarad Code
First two digits represent significant figures. Third digit specifies number of zeros to follow.
Capacitance Tolerances
M = ±10% K = ±10% J = ±5% (For 5% tolerance contact KEMET sales rep.)
Termination Finish
B - Gold plated C - Hot solder dipped H - Solder plated K - Solder fused T - 100% Tin
Voltage
As shown
Reliability Level
A = Non-ER; B = 0.1%/K hrs.; C = 0.01%/K hrs.
T493 RATINGS AND PART NUMBER REFERENCE
CapaciCapaci- Case Case tance tance Size Size μF µF KEMET KEMET PartPart Number Number Std. ESR Std. ESR Low ESR Low ESR DCL DCL DF % % DF Ohms Ohms Ohms Ohms μA @ @@ +25ºC µA @ +25ºC @+25°C @+25°C @+25°C @+25°C 25ºC 25ºC 120 120 Hz Hz 100 kHz 100 kHz 100 kHz 100 kHz Max Max MaxMax Max Max Max Max 6.0 6.0 4.0 4.0 3.5 3.5 3.0 3.0 2.0 2.0 2.0 2.0 1.2 1.2 1.5 1.5 1.2 1.2 1.5 1.5 0.6 0.6 0.5 0.5 3.0 3.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 2.0 2.0 0.25 0.25 0.2 0.2 0.7 0.7 0.2 0.2 0.2 0.2 0.3 0.3 0.15 0.15 0.7 0.7 0.15 0.15 0.2 0.2 Ultra-Low Ultra-Low ESR, Ohms ESR, Ohms @+25°C @+25°C 100 kHz 100 kHz Max Max N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 0.50 0.50 N/A N/A N/A N/A 0.25 0.25 N/A N/A N/A N/A N/A N/A N/A N/A
2.2 2.2 3.3 3.3 4.7 4.7 6.8 6.8 6.8 6.8 10.010.0 10.010.0 15.015.0 15.015.0 22.022.0 22.022.0 22.022.0 33.033.0 33.033.0 33.033.0 47.047.0 47.047.0 68.068.0 68.068.0 68.068.0 #100.0 #100.0 100.0 100.0 100.0 100.0 #150.0 #150.0 150.0 150.0 220.0 220.0 330.0 330.0 330.0 330.0 1.5 1.5 2.2 2.2 3.3 3.3 4.7 4.7 4.7 4.7 6.8 6.8 6.8 6.8 10.010.0 10.010.0 15.015.0 15.015.0 15.015.0 22.022.0 22.022.0 22.022.0
A A A A B A B A B A B C A B C B C B C D *B C D *C D D D X A A A A B A B A B A B C A B C
A A A A B A B A B A B C A B C B C B C D B C D C D D D X A A A A B A B A B A B C A B C
4 4 Volt Rating at +85ºC (2.7 Volt Rating at +125ºC) Volt Rating at +85ºC (2.7 Volt Rating at +125ºC) T493A225(1)004(2)(3)(4)(5) 0.5 0.5 6.0 6.0 8.08.0 T493A225(1)004(2)(3)(4)(5) T493A335(1)004(2)(3)(4)(5) 0.5 0.5 6.0 6.0 8.08.0 T493A335(1)004(2)(3)(4)(5) T493A475(1)004(2)(3)(4)(5) 0.5 0.5 6.0 6.0 8.08.0 T493A475(1)004(2)(3)(4)(5) T493A685(1)004(2)(3)(4)(5) 0.5 0.5 6.0 6.0 6.06.0 T493A685(1)004(2)(3)(4)(5) T493B685(1)004(2)(3)(4)(5) 0.5 0.5 6.0 6.0 5.55.5 T493B685(1)004(2)(3)(4)(5) T493A106(1)004(2)(3)(4)(5) 0.5 0.5 6.0 6.0 6.06.0 T493A106(1)004(2)(3)(4)(5) T493B106(1)004(2)(3)(4)(5) 0.5 0.5 6.0 6.0 3.53.5 T493B106(1)004(2)(3)(4)(5) T493A156(1)004(2)(3)(4)(5) 0.6 0.6 6.0 6.0 4.04.0 T493A156(1)004(2)(3)(4)(5) T493B156(1)004(2)(3)(4)(5) 0.6 0.6 6.0 6.0 3.53.5 T493B156(1)004(2)(3)(4)(5) T493A226(1)004(2)(3)(4)(5) 0.9 0.9 6.0 6.0 4.04.0 T493A226(1)004(2)(3)(4)(5) T493B226(1)004(2)(3)(4)(5) 0.9 0.9 6.0 6.0 3.53.5 T493B226(1)004(2)(3)(4)(5) T493C226(1)004(2)(3)(4)(5) 0.9 0.9 6.0 6.0 1.81.8 T493C226(1)004(2)(3)(4)(5) T493A336(1)004(2)(3)(4)(5) 1.3 1.3 6.0 6.0 4.04.0 T493A336(1)004(2)(3)(4)(5) T493B336(1)004(2)(3)(4)(5) 1.3 1.3 6.0 6.0 3.53.5 T493B336(1)004(2)(3)(4)(5) T493C336(1)004(2)(3)(4)(5) 1.3 1.3 6.0 6.0 1.81.8 T493C336(1)004(2)(3)(4)(5) T493B476(1)004(2)(3)(4)(5) 1.9 1.9 6.0 6.0 3.03.0 T493B476(1)004(2)(3)(4)(5) T493C476(1)004(2)(3)(4)(5) 1.9 1.9 6.0 6.0 1.81.8 T493C476(1)004(2)(3)(4)(5) T493B686(1)004(2)(3)(4)(5) 2.7 2.7 6.0 6.0 3.53.5 T493B686(1)004(2)(3)(4)(5) T493C686(1)004(2)(3)(4)(5) 2.7 2.7 6.0 6.0 1.61.6 T493C686(1)004(2)(3)(4)(5) T493D686(1)004(2)(3)(4)(5) 2.7 2.7 6.0 6.0 0.80.8 T493D686(1)004(2)(3)(4)(5) T493B107(1)004(2)(3)(4)(5) 4.0 4.0 8.0 8.0 1.01.0 T493B107(1)004(2)(3)(4)(5) T493C107(1)004(2)(3)(4)(5) 4.0 4.0 8.0 8.0 1.21.2 T493C107(1)004(2)(3)(4)(5) T493D107(1)004(2)(3)(4)(5) 4.0 4.0 8.0 8.0 0.80.8 T493D107(1)004(2)(3)(4)(5) T493C157(1)004(2)(3)(4)(5) 6.0 6.0 8.0 8.0 1.21.2 T493C157(1)004(2)(3)(4)(5) T493D157(1)004(2)(3)(4)(5) T493D157(1)004(2)(3)(4)(5) 6.0 6.0 8.0 8.0 0.80.8 T493D227(1)004(2)(3)(4)(5) T493D227(1)004(2)(3)(4)(5) 8.8 8.8 8.0 8.0 0.90.9 T493D337(1)004(2)(3)(4)(5) T493D337(1)004(2)(3)(4)(5) 13.2 13.2 8.0 8.0 0.70.7 T493X337(1)004(2)(3)(4)(5) T493X337(1)004(2)(3)(4)(5) 13.2 13.2 8.0 8.0 0.50.5 6 6 Volt Rating at +85ºC (4 Volt Rating at +125ºC) Volt Rating at +85ºC (4 Volt Rating at +125ºC) T493A155(1)006(2)(3)(4(5) T493A155(1)006(2)(3)(4(5) 0.5 0.5 6.0 6.0 8.08.0 T493A225(1)006(2)(3)(4)(5) T493A225(1)006(2)(3)(4)(5) 0.5 0.5 6.0 6.0 8.08.0 T493A335(1)006(2)(3)(4)(5) T493A335(1)006(2)(3)(4)(5) 0.5 0.5 6.0 6.0 8.08.0 T493A475(1)006(2)(3)(4)(5) T493A475(1)006(2)(3)(4)(5) 0.5 0.5 6.0 6.0 6.06.0 T493B475(1)006(2)(3)(4)(5) T493B475(1)006(2)(3)(4)(5) 0.5 0.5 6.0 6.0 5.55.5 T493A685(1)006(2)(3)(4)(5) T493A685(1)006(2)(3)(4)(5) 0.5 0.5 6.0 6.0 6.06.0 T493B685(1)006(2)(3)(4)(5) T493B685(1)006(2)(3)(4)(5) 0.5 0.5 6.0 6.0 3.53.5 T493A106(1)006(2)(3)(4)(5) T493A106(1)006(2)(3)(4)(5) 0.6 0.6 6.0 6.0 4.04.0 T493B106(1)006(2)(3)(4)(5) T493B106(1)006(2)(3)(4)(5) 0.6 0.6 6.0 6.0 3.53.5 T493A156(1)006(2)(3)(4)(5) T493A156(1)006(2)(3)(4)(5) 0.9 0.9 6.0 6.0 4.04.0 T493B156(1)006(2)(3)(4)(5) T493B156(1)006(2)(3)(4)(5) 0.9 0.9 6.0 6.0 3.53.5 T493C156(1)006(2)(3)(4)(5) T493C156(1)006(2)(3)(4)(5) 0.9 0.9 6.0 6.0 1.81.8 T493A226(1)006(2)(3)(4)(5) T493A226(1)006(2)(3)(4)(5) 1.4 1.4 6.0 6.0 4.04.0 T493B226(1)006(2)(3)(4)(5) T493B226(1)006(2)(3)(4)(5) 1.4 1.4 6.0 6.0 3.53.5 T493C226(1)006(2)(3)(4)(5) T493C226(1)006(2)(3)(4)(5) 1.4 1.4 6.0 6.0 1.81.8
6.0 6.0 6.0 6.0 6.0 6.0 3.5 3.5 3.5 3.5 2.0 2.0 1.2 1.2 2.0 2.0 1.0 1.0 1.5 1.5 0.7 0.7 0.6 0.6 3.0 3.0 0.6 0.6 0.5 0.5
N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
(1) To complete KEMET part number, insert M for ±20% or K for ±10% capacitance tolerance. To request ±5% tolerance,contact KEMET sales representative. (2) To complete KEMET part number, insert A for Non-ER; B for 0.1%/1000 Hrs.; or C for 0.01%/1000 Hrs. Reliability Level. (3) To complete KEMET part number, insert B for Gold Plated (50 µ inch minimum); C for Hot Solder Dipped (60 µ inch minimum); H for Solder Plated (100 µ inch minimum); K for Solder Fused (60 µ inch minimum Termination Finish or T for 100% Tin. (4) To complete KEMET part number for Surge Current testing, insert 61 for none; 62 for 10 cycles +25°C; or 64 for 10 cycles, -55°C & +85°C. (5) To complete KEMET part number, insert 10 for Standard ESR; 20 for Low ESR or 30 for Ultra-low ESR Option.
* Extended Values
#Maximum Capacitance Change @ 125°C = +15%
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300*
23
Solid Tantalum Surface Mount
SOLID TANTALUM CHIP CAPACITORS
T493 SERIES—Military COTS
T493 RATINGS AND PART NUMBER REFERENCE
Capacitance µF Case Size KEMET Part Number DCL µA @ 25ºC Max DF % @ +25ºC 120 Hz Max Std. ESR Ohms @+25°C 100 kHz Max Low ESR Ohms @+25°C 100 kHz Max 0.6 0.3 2.0 0.25 0.22 0.65 0.2 0.2 8.0 0.3 0.15 0.3 0.15 0.3 0.1 0.15 0.15 0.1 6.0 6.0 6.0 4.0 3.5 3.0 1.5 3.0 1.2 1.8 0.8 0.6 4.0 0.7 0.5 0.7 0.4 2.0 0.3 0.3 0.3 0.2 0.3 0.2 0.15 0.3 0.1 0.1 0.2 0.2 0.1 0.1 8.0 6.0 6.0 4.0 3.5 2.0 3.0 1.5 3.0 1.2 0.8 0.8 0.6 0.8 0.4 0.8 0.4 0.3 Ultra-Low ESR, Ohms @+25°C 100 kHz Max N/A N/A N/A 0.25 N/A N/A N/A 0.18 0.70 0.15 N/A 0.20 N/A 0.23 0.10 0.07 0.10 0.07 N/A N/A N/A N/A N/A N/A 1.3 N/A 0.90 N/A 0.75 N/A 3.2 N/A 0.48 N/A 0.29 N/A N/A N/A N/A 0.08 0.23 0.09 0.15 N/A 0.08 0.08 0.09 0.08 0.05 0.05 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 0.75 N/A N/A 0.80 N/A N/A N/A N/A
33.0 33.0 47.0 47.0 47.0 68.0 68.0 68.0 #100.0 100.0 100.0 #150.0 150.0 #220.0 220.0 220.0 330.0 330.0 1.0 1.5 2.2 3.3 3.3 4.7 4.7 6.8 6.8 10.0 10.0 10.0 #15.0 15.0 15.0 22.0 22.0 33.0 33.0 33.0 47.0 47.0 68.0 68.0 68.0 #100.0 100.0 150.0 150.0 #220.0 220.0 330.0 0.68 1.0 1.5 2.2 3.3 3.3 4.7 4.7 #6.8 6.8 6.8 10.0 10.0 #15.0 15.0 #22.0 22.0 22.0
B C B C D B C D B C D C D C D X D X A A A A B A B A B A B C A B C B C B C D C D C D X C D D X D X X A A A A A B A B A B C B C B C B C D
6 Volt Rating at +85ºC (4 Volt Rating at +125ºC) cont. T493B336(1)006(2)(3)(4)(5) 2.0 6.0 3.0 T493C336(1)006(2)(3)(4)(5) 2.0 6.0 1.8 T493B476(1)006(2)(3)(4)(5) 2.9 6.0 3.5 T493C476(1)006(2)(3)(4)(5) 2.9 6.0 1.6 T493D476(1)006(2)(3)(4)(5) 2.9 6.0 0.8 T493B686(1)006(2)(3)(4)(5) 4.1 8.0 1.0 T493C686(1)006(2)(3)(4)(5) 4.1 6.0 1.2 T493D686(1)006(2)(3)(4)(5) 4.1 6.0 0.8 T493B107(1)006(2)(3)(4)(5) 6.3 15.0 10.0 T493C107(1)006(2)(3)(4)(5) 6.0 8.0 1.2 T493D107(1)006(2)(3)(4)(5) 6.0 8.0 0.8 T493C157(1)006(2)(3)(4)(5) 9.0 8.0 1.2 T493D157(1)006(2)(3)(4)(5) 9.0 8.0 0.7 T493C227(1)006(2)(3)(4)(5) 13.2 10.0 1.2 T493D227(1)006(2)(3)(4)(5) 13.2 8.0 0.7 T493X227(1)006(2)(3)(4)(5) 13.2 8.0 0.7 T493D337(1)006(2)(3)(4)(5) 19.8 8.0 0.5 T493X337(1)006(2)(3)(4)(5) 19.8 8.0 0.5 T493A105(1)010(2)(3)(4)(5) 0.5 4.0 10.0 T493A155(1)010(2)(3)(4)(5) 0.5 6.0 8.0 T493A225(1)010(2)(3)(4)(5) 0.5 6.0 8.0 T493A335(1)010(2)(3)(4)(5) 0.5 6.0 6.0 T493B335(1)010(2)(3)(4)(5) 0.5 6.0 5.5 T493A475(1)010(2)(3)(4)(5) 0.5 6.0 6.0 T493B475(1)010(2)(3)(4)(5) 0.5 6.0 3.5 T493A685(1)010(2)(3)(4)(5) 0.7 6.0 6.0 T493B685(1)010(2)(3)(4)(5) 0.7 6.0 3.5 T493A106(1)010(2)(3)(4)(5) 1.0 6.0 4.0 T493B106(1)010(2)(3)(4)(5) 1.0 6.0 3.5 T493C106(1)010(2)(3)(4)(5) 1.0 6.0 1.8 T493A156(1)010(2)(3)(4)(5) 1.5 8.0 6.0 T493B156(1)010(2)(3)(4)(5) 1.5 6.0 3.5 T493C156(1)010(2)(3)(4)(5) 1.5 6.0 1.8 T493B226(1)010(2)(3)(4)(5) 2.2 6.0 3.0 T493C226(1)010(2)(3)(4)(5) 2.2 6.0 1.8 T493B336(1)010(2)(3)(4)(5) 3.3 6.0 3.5 T493C336(1)010(2)(3)(4)(5) 3.3 6.0 1.6 T493D336(1)010(2)(3)(4)(5) 3.3 6.0 0.8 T493C476(1)010(2)(3)(4)(5) 4.7 6.0 1.2 T493D476(1)010(2)(3)(4)(5) 4.7 6.0 0.8 T493C686(1)010(2)(3)(4)(5) 6.8 6.0 1.2 T493D686(1)010(2)(3)(4)(5) 6.8 6.0 0.8 T493X686(1)010(2)(3)(4)(5) 5.4 4.0 0.5 T493C107(1)010(2)(3)(4)(5) 10.0 8.0 1.2 T493D107(1)010(2)(3)(4)(5) 10.0 8.0 0.7 T493D157(1)010(2)(3)(4)(5) 15.0 8.0 0.7 T493X157(1)010(2)(3)(4)(5) 15.0 8.0 0.7 T493D227(1)010(2)(3)(4)(5) 22.0 8.0 0.5 T493X227(1)010(2)(3)(4)(5) 22.0 8.0 0.5 T493X337(1)010(2)(3)(4)(5) 33.0 10.0 0.5 16 Volt Rating at +85ºC (10 Volt Rating at +125ºC) T493A684(1)016(2)(3)(4)(5) 1.1 6.0 12.0 T493A105(1)016(2)(3)(4)(5) 0.5 4.0 10.0 T493A155(1)016(2)(3)(4)(5) 0.5 6.0 8.0 T493A225(1)016(2)(3)(4)(5) 0.5 6.0 6.0 T493A335(1)016(2)(3)(4)(5) 0.5 6.0 6.0 T493B335(1)016(2)(3)(4)(5) 0.5 6.0 3.5 T493A475(1)016(2)(3)(4)(5) 0.8 6.0 6.0 T493B475(1)016(2)(3)(4)(5) 0.8 6.0 3.5 T493A685(1)016(2)(3)(4)(5) 1.1 6.0 7.0 T493B685(1)016(2)(3)(4)(5) 1.1 6.0 3.5 T493C685(1)016(2)(3)(4)(5) 1.1 6.0 1.9 T493B106(1)016(2)(3)(4)(5) 1.6 6.0 3.5 T493C106(1)016(2)(3)(4)(5) 1.6 6.0 1.8 T493B156(1)016(2)(3)(4)(5) 2.4 6.0 3.0 T493C156(1)016(2)(3)(4)(5) 2.4 6.0 1.8 T493B226(1)016(2)(3)(4)(5) 3.5 6.0 2.2 T493C226(1)016(2)(3)(4)(5) 3.6 6.0 1.6 T493D226(1)016(2)(3)(4)(5) 3.6 6.0 0.8
24
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
(1) To complete KEMET part number, insert M for ±20% or K for ±10% capacitance tolerance. To request ±5% tolerance,contact KEMET sales representative. (2) To complete KEMET part number, insert A for Non-ER; B for 0.1%/1000 Hrs.; or C for 0.01%/1000 Hrs. Reliability Level. (3) To complete KEMET part number, insert B for Gold Plated (50 µ inch minimum); C for Hot Solder Dipped (60 µ inch minimum); H for Solder Plated (100 µ inch minimum); K for Solder Fused (60 μ inch minimum Termination Finish or T for 100% Tin. (4) To complete KEMET part number for Surge Current testing, insert 61 for none; 62 for 10 cycles +25°C; or 64 for 10 cycles, -55°C & +85°C. (5) To complete KEMET part number, insert 10 for Standard ESR; 20 for Low ESR or 30 for Ultra-low ESR Option. * Extended Values #Maximum Capacitance Change @ 125°C = +15%
SOLID TANTALUM CHIP CAPACITORS
T493 SERIES—Military COTS
T493 RATINGS AND PART NUMBER REFERENCE
Capacitance µF Case Size KEMET Part Number DCL µA @ 25ºC Max DF % @ +25ºC 120 Hz Max Std. ESR Ohms @+25°C 100 kHz Max Low ESR Ohms @+25°C 100 kHz Max 0.3 0.25 0.5 0.2 0.2 0.125 0.1 0.2 9.0 8.0 5.5 4.5 4.0 4.0 1.5 4.0 1.3 1.8 1.0 0.6 1.0 0.6 1.0 0.5 0.4 0.35 0.4 0.3 0.2 0.2 0.15 0.2 0.15 10.0 9.0 6.0 5.5 4.0 2.0 3.0 1.5 1.2 2.2 2.0 1.2 1.0 0.6 0.6 1.0 0.5 0.4 0.9 0.35 0.2 0.2 0.23 0.4 0.3 0.2 0.3 Ultra-Low ESR, Ohms @+25°C 100 kHz Max 0.23 0.15 0.35 0.10 0.15 0.10 0.08 0.10 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 1.0 0.48 0.38 0.28 N/A 0.18 0.15 0.10 0.10 0.15 0.12 N/A N/A N/A N/A N/A N/A N/A N/A N/A 1.30 N/A 0.75 N/A 0.58 0.49 N/A 0.45 N/A N/A 0.28 0.20 0.20 0.23 0.09 0.18 0.12 0.15
33.0 33.0 #47.0 47.0 68.0 #100.0 100.0 #150.0 0.47 0.68 1.0 1.5 1.5 2.2 2.2 #3.3 3.3 #4.7 4.7 4.7 #6.8 6.8 #10.0 10.0 15.0 15.0 #22.0 22.0 33.0 47.0 47.0 #68.0 68.0 0.33 0.47 0.68 0.68 1.0 1.0 1.5 1.5 2.2 2.2 3.3 3.3 #4.7 4.7 6.8 6.8 10.0 10.0 #15.0 15.0 15.0 22.0 22.0 33.0 33.0 †47.0 †47.0
C D C D D D X X A A A A B A B A B A B C B C B C C D C D D D X D X A A A B A B A B B C B C B C C D C D C D X D X D X D X
16 Volt Rating at +85ºC (10 Volt Rating at +125ºC) cont. T493C336(1)016(2)(3)(4)(5) 5.3 6.0 1.2 T493D336(1)016(2)(3)(4)(5) 5.3 6.0 0.8 T493C476(1)016(2)(3)(4)(5) 7.5 6.0 1.2 T493D476(1)016(2)(3)(4)(5) 7.5 6.0 0.8 T493D686(1)016(2)(3)(4)(5) 10.9 6.0 0.7 T493D107(1)016(2)(3)(4)(5) 16.0 8.0 0.7 T493X107(1)016(2)(3)(4)(5) 16.0 8.0 0.7 T493X157(1)016(2)(3)(4)(5) 24.0 8.0 0.5 20 Volt Rating at +85ºC (13 Volt Rating at +125ºC) T493A474(1)020(2)(3)(4)(5) 0.5 4.0 14.0 T493A684(1)020(2)(3)(4)(5) 0.5 4.0 12.0 T493A105(1)020(2)(3)(4)(5) 0.5 4.0 10.0 T493A155(1)020(2)(3)(4)(5) 0.5 6.0 8.0 T493B155(1)020(2)(3)(4)(5) 0.5 6.0 6.0 T493A225(1)020(2)(3)(4)(5) 0.5 6.0 7.0 T493B225(1)020(2)(3)(4)(5) 0.5 6.0 3.5 T493A335(1)020(2)(3)(4)(5) 0.7 6.0 7.0 T493B335(1)020(2)(3)(4)(5) 0.7 6.0 3.5 T493A475(1)020(2)(3)(4)(5) 1.0 8.0 6.0 T493B475(1)020(2)(3)(4)(5) 1.0 6.0 3.5 T493C475(1)020(2)(3)(4)(5) 1.0 6.0 2.4 T493B685(1)020(2)(3)(4)(5) 1.4 6.0 3.5 T493C685(1)020(2)(3)(4)(5) 1.4 6.0 1.9 T493B106(1)020(2)(3)(4)(5) 2.0 6.0 3.0 T493C106(1)020(2)(3)(4)(5) 2.0 6.0 1.8 T493C156(1)020(2)(3)(4)(5) 3.0 6.0 1.7 T493D156(1)020(2)(3)(4)(5) 3.0 6.0 1.0 T493C226(1)020(2)(3)(4)(5) 4.4 6.0 1.2 T493D226(1)020(2)(3)(4)(5) 4.4 6.0 0.8 T493D336(1)020(2)(3)(4)(5) 6.6 6.0 0.8 T493D476(1)020(2)(3)(4)(5) 9.4 6.0 0.7 T493X476(1)020(2)(3)(4)(5) 7.5 4.0 0.7 T493D686(1)020(2)(3)(4)(5) 13.6 8.0 0.7 T493X686(1)020(2)(3)(4)(5) 13.6 6.0 0.7 25 Volt Rating at +85ºC (17 Volt Rating at +125ºC) T493A334(1)025(2)(3)(4)(5) 0.5 4.0 15.0 T493A474(1)025(2)(3)(4)(5) 0.5 4.0 14.0 T493A684(1)025(2)(3)(4)(5) 0.5 4.0 10.0 T493B684(1)025(2)(3)(4)(5) 0.5 4.0 7.5 T493A105(1)025(2)(3)(4)(5) 0.5 4.0 8.0 T493B105(1)025(2)(3)(4)(5) 0.5 4.0 5.0 T493A155(1)025(2)(3)(4)(5) 0.5 6.0 10.0 T493B155(1)025(2)(3)(4)(5) 0.5 6.0 5.0 T493B225(1)025(2)(3)(4)(5) 0.6 6.0 4.5 T493C225(1)025(2)(3)(4)(5) 0.6 6.0 3.5 T493B335(1)025(2)(3)(4)(5) 0.9 6.0 3.5 T493C335(1)025(2)(3)(4)(5) 0.9 6.0 2.5 T493B475(1)025(2)(3)(4)(5) 1.2 6.0 1.5 T493C475(1)025(2)(3)(4)(5) 1.2 6.0 2.4 T493C685(1)025(2)(3)(4)(5) 1.7 6.0 1.9 T493D685(1)025(2)(3)(4)(5) 1.7 6.0 1.4 T493C106(1)025(2)(3)(4)(5) 2.5 6.0 1.5 T493D106(1)025(2)(3)(4)(5) 2.5 6.0 1.0 T493C156(1)025(2)(3)(4)(5) 3.8 6.0 1.5 T493D156(1)025(2)(3)(4)(5) 3.8 6.0 1.0 T493X156(1)025(2)(3)(4)(5) 3.0 6.0 0.7 T493D226(1)025(2)(3)(4)(5) 5.5 6.0 0.8 T493X226(1)025(2)(3)(4)(5) 4.4 4.0 0.7 T493D336(1)025(2)(3)(4)(5) 8.3 6.0 0.7 T493X336(1)025(2)(3)(4)(5) 8.3 6.0 0.7 T493D476(1)025(2)(3)(4)(5) 11.8 10.0 0.7 T493X476(1)025(2)(3)(4)(5) 11.8 6.0 0.7
(1) To complete KEMET part number, insert M for ±20% or K for ±10% capacitance tolerance. To request ±5% tolerance,contact KEMET sales representative. (2) To complete KEMET part number, insert A for Non-ER; B for 0.1%/1000 Hrs.; or C for 0.01%/1000 Hrs. Reliability Level. (3) To complete KEMET part number, insert B for Gold Plated (50 µ inch minimum); C for Hot Solder Dipped (60 µ inch minimum); H for Solder Plated (100 µ inch minimum); K for Solder Fused (60 μ inch minimum Termination Finish or T for 100% Tin. (4) To complete KEMET part number for Surge Current testing, insert 61 for none; 62 for 10 cycles +25°C; or 64 for 10 cycles, -55°C & +85°C. (5) To complete KEMET part number, insert 10 for Standard ESR; 20 for Low ESR or 30 for Ultra-low ESR Option.
* Extended Values
#Maximum Capacitance Change @ 125°C = +15% † Maximum Capacitance Change @ 125°C = +20%
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
25
Solid Tantalum Surface Mount
SOLID TANTALUM CHIP CAPACITORS
T493 SERIES—Military COTS
T493 RATINGS AND PART NUMBER REFERENCE
Capacitance µF Case Size KEMET Part Number DCL µA @ 25ºC Max DF % @ +25ºC 120 Hz Max Std. ESR Ohms @+25°C 100 kHz Max Low ESR Ohms @+25°C 100 kHz Max 10.0 6.0 6.0 6.0 4.0 2.5 6.0 2.5 6.0 2.0 3.0 2.5 2.5 1.5 1.3 0.8 0.6 0.7 0.9 0.5 1.2 0.3 0.25 0.3 0.3 0.4 0.3 0.3 0.3 10.0 10.0 10.0 10.0 2.5 2.0 1.8 1.6 1.6 1.5 1.0 1.5 0.8 0.8 0.6 0.3 0.5 Ultra-Low ESR, Ohms @+25°C 100 kHz Max N/A N/A N/A N/A N/A 1.5 N/A N/A N/A 1.5 N/A N/A 1.5 0.75 N/A 0.60 0.45 N/A N/A 0.40 N/A 0.25 0.18 0.23 0.20 0.20 0.20 0.18 N/A N/A N/A N/A N/A N/A N/A N/A N/A 1.3 N/A N/A N/A 0.60 0.70 0.28 0.30 N/A
0.10 0.15 0.22 0.33 0.47 0.47 0.68 0.68 1.0 1.0 1.5 1.5 2.2 2.2 #3.3 3.3 4.7 4.7 6.8 6.8 #10.0 10.0 10.0 15.0 15.0 #22.0 22.0 #33.0 #47.0 0.10 0.15 0.15 0.22 0.33 0.47 0.47 0.68 1.0 1.5 1.5 2.2 2.2 3.3 4.7 4.7 6.8
A A A A A B A B A B B C B C B C C D C D C D X D X D X X E A A B B B B C C C C D C D D D X X
35 Volt Rating at +85ºC (23 Volt Rating at +125ºC) T493A104(1)035(2)(3)(4)(5) 0.5 4.0 20.0 T493A154(1)035(2)(3)(4)(5) 0.5 4.0 19.0 T493A224(1)035(2)(3)(4)(5) 0.5 4.0 18.0 T493A334(1)035(2)(3)(4)(5) 0.5 4.0 15.0 T493A474(1)035(2)(3)(4)(5) 0.5 4.0 14.0 T493B474(1)035(2)(3)(4)(5) 0.5 4.0 8.0 T493A684(1)035(2)(3)(4)(5) 0.5 4.0 10.0 T493B684(1)035(2)(3)(4)(5) 0.5 4.0 6.5 T493A105(1)035(2)(3)(4)(5) 0.5 4.0 10.0 T493B105(1)035(2)(3)(4)(5) 0.5 4.0 5.0 T493B155(1)035(2)(3)(4)(5) 0.5 6.0 5.0 T493C155(1)035(2)(3)(4)(5) 0.5 6.0 4.5 T493B225(1)035(2)(3)(4)(5) 0.8 6.0 4.0 T493C225(1)035(2)(3)(4)(5) 0.8 6.0 3.5 T493B335(1)035(2)(3)(4)(5) 1.2 6.0 3.5 T493C335(1)035(2)(3)(4)(5) 1.2 6.0 2.5 T493C475(1)035(2)(3)(4)(5) 1.7 6.0 2.5 T493D475(1)035(2)(3)(4)(5) 1.7 6.0 1.5 T493C685(1)035(2)(3)(4)(5) 2.4 6.0 2.0 T493D685(1)035(2)(3)(4)(5) 2.4 6.0 1.3 T493C106(1)035(2)(3)(4)(5) 3.5 6.0 2.0 T493D106(1)035(2)(3)(4)(5) 3.5 6.0 1.0 T493X106(1)035(2)(3)(4)(5) 2.8 4.0 0.9 T493D156(1)035(2)(3)(4)(5) 5.3 6.0 0.8 T493X156(1)035(2)(3)(4)(5) 5.3 6.0 0.9 T493D226(1)035(2)(3)(4)(5) 7.7 6.0 0.7 T493X226(1)035(2)(3)(4)(5) 7.7 6.0 0.7 T493X336(1)035(2)(3)(4)(5) 11.6 6.0 0.6 T493E476(1)035(2)(3)(4)(5) 16.5 10.0 0.5 50 Volt Rating at +85ºC (33 Volt Rating at +125ºC) T493A104(1)050(2)(3)(4)(5) 0.5 4.0 20.0 T493A154(1)050(2)(3)(4)(5) 0.5 4.0 19.0 T493B154(1)050(2)(3)(4)(5) 0.5 4.0 16.0 T493B224(1)050(2)(3)(4)(5) 0.5 4.0 14.0 T493B334(1)050(2)(3)(4)(5) 0.5 4.0 10.0 T493B474(1)050(2)(3)(4)(5) 0.5 4.0 9.0 T493C474(1)050(2)(3)(4)(5) 0.5 4.0 8.0 T493C684(1)050(2)(3)(4)(5) 0.5 4.0 7.0 T493C105(1)050(2)(3)(4)(5) 0.5 4.0 5.5 T493C155(1)050(2)(3)(4)(5) 0.8 6.0 4.5 T493D155(1)050(2)(3)(4)(5) 0.8 6.0 3.5 T493C225(1)050(2)(3)(4)(5) 1.1 6.0 3.5 T493D225(1)050(2)(3)(4)(5) 1.1 6.0 2.5 T493D335(1)050(2)(3)(4)(5) 1.7 6.0 2.0 T493D475(1)050(2)(3)(4)(5) 2.4 6.0 1.5 T493X475(1)050(2)(3)(4)(5) 1.9 4.0 0.9 T493X685(1)050(2)(3)(4)(5) 3.5 6.0 1.0
(1) To complete KEMET part number, insert M for ±20% or K for ±10% capacitance tolerance. To request ±5% tolerance,contact KEMET sales representative. (2) To complete KEMET part number, insert A for Non-ER; B for 0.1%/1000 Hrs.; or C for 0.01%/1000 Hrs. Reliability Level. (3) To complete KEMET part number, insert B for Gold Plated (50 µ inch minimum); C for Hot Solder Dipped (60 µ inch minimum); H for Solder Plated (100 µ inch minimum); K for Solder Fused (60 μ inch minimum Termination Finish or T for 100% Tin. (4) To complete KEMET part number for Surge Current testing, insert 61 for none; 62 for 10 cycles +25°C; or 64 for 10 cycles, -55°C & +85°C. (5) To complete KEMET part number, insert 10 for Standard ESR; 20 for Low ESR or 30 for Ultra-low ESR Option.
* Extended Values
#Maximum Capacitance Change @ 125°C = +15%
26
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
TANTALUM AND ALUMINUM CHIP CAPACITORS
Packaging Information
Tape & Reel Packaging
KEMET’s Molded Tantalum and Aluminum Chip Capacitor families are packaged in 8 mm and 12 mm plastic tape on 7" and 13" reels, in accordance with EIA Standard 481-1: Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape fed automatic pick and place systems.
Right Hand Orientation Only
Embossed Carrier
(+)
(–)
Embossment
Top Tape Thickness .10mm (.004") Max Thickness
8mm ±.30 8mm (0.315") (.315 ±.012") or or 12mm (0.472") 12mm ±.30 (.472 ±.012")
178mm (7.00") 180mm (7.0") oror 330mm (13.00") 330mm (13.0")
Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556.
QUANTITIES PACKAGED PER REEL
Case Code KEMET EIA R 2012-12 S 3216-12 T 3528-12 U 6032-15 W 7343-15 V 7343-20 A 3216-18 B 3528-21 C 6032-28 D 7343-31 Y 7343-40 X 7343-43 E 7260-38 Tape Width-mm 8 8 8 12 12 12 8 8 12 12 12 12 12 7" Reel* 2,500 2,500 2,500 1,000 1,000 1,000 2,000 2,000 500 500 500 500 500 13" Reel* 10,000 10,000 10,000 5,000 3,000 3,000 9,000 8,000 3,000 2,500 2,000 2,000 2,000
* No c-spec required for 7" reel packaging. C-7280 required for 13" reel packaging. * Standard reel packaging is not mandatory. * Bulk packaging also available using C-7610.
92
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
Packaging
TANTALUM, CERAMIC AND ALUMINUM CHIP CAPACITORS
Packaging Information
Performance Notes
1. Cover Tape Break Force: 1.0 Kg Minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 Newton to 1.0 Newton (10g to 100g) 12 mm 0.1 Newton to 1.3 Newton (10g to 130g) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute. 3. Reel Sizes: Molded tantalum capacitors are available on either 180 mm (7") reels (standard) or 330 mm (13") reels (with C-7280). Note that 13” reels are preferred. 4. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556.
Embossed Carrier Tape Configuration: Figure 1
Table 1 — EMBOSSED TAPE DIMENSIONS (Metric will govern) Constant Dimensions — Millimeters (Inches)
Tape Size 8 mm and 12 mm D0 E P0 4.0 ±0.10 (0.157 ±0.004) P2 2.0 ±0.05 (0.079 ±0.002) T Max 0.600 (0.024) T1 Max 0.100 (0.004) 1.5 1.75 ±0.10 +0.10 -0.0 (0.059 (0.069 ±0.004) +0.004, -0.0) Pitch Single (4 mm) B1 Max. Note 1 4.4 (0.173) 12 mm Double (8 mm) 8.2 (0.323) D1 Min. Note 2 1.0
Variable Dimensions — Millimeters (Inches)
Tape Size 8 mm F 3.5 ±0.05 P1 4.0 ±0.10 R Min. Note 3 25.0 T2 Max 2.5 (0.098) W 8.0 ±0.30 (.315 ±0.012) A0B0K0 Note 4
(0.039) (0.138 ±0.002) 1.5 5.5 ±0.05 (0.059) (0.217 ±0.002)
(0.157 ±0.004) (0.984) 8.0 ±0.10 30.0 (0.315 ±0.004) (1.181)
4.6 12.0 ±0.30 (0.181) (0.472 ±0.012)
NOTES
1. B1 dimension is a reference dimension for tape feeder clearance only. 2. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 3. Tape with components shall pass around radius “R” without damage (see sketch A). The minimum trailer length (Fig. 2) may require additional length to provide R min. for 12 mm embossed tape for reels with hub diameters approaching N min. (Table 2) 4. The cavity defined by A0, B0, and K0 shall be configured to surround the part with sufficient clearance such that the chip does not protrude beyond the sealing plane of the cover tape, the chip can be removed from the cavity in a vertical direction without mechanical restriction, rotation of the chip is limited to 20 degrees maximum in all 3 planes, and lateral movement of the chip is restricted to 0.5 mm maximum in the pocket (not applicable to vertical clearance.)
94
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
TANTALUM, CERAMIC AND ALUMINUM CHIP CAPACITORS
Packaging Information Embossed Carrier Tape Configuration (cont.)
20°
Sketch D: Tape Camber (Top View)
1mm (0.039) Max.
250mm (9.843) Allowable camber to be 1 mm/250 mm.
1mm (0.039) Max.
400mm (15.75) Min.
Figure 2: Tape Leader & Trailer Dimensions (Metric Dimensions Will Govern)
Figure 3: Reel Dimensions (Metric Dimensions will govern)
Table 2 – REEL DIMENSIONS (Metric will govern)
Tape Size 8 mm A Max 330.0 (12.992) B* Min 1.5 (0.059) C 13.0 ± 0.20 (0.512 ± 0.008) D* Min 20.2 (0.795) N Min 50.0 (1.969) See Note 3 Table 1 W1 8.4 +1.5, -0.0 (0.331 +0.059, -0.0) 12.4 +2.0, -0.0 (0.488 +0.078, -0.0) W2 Max 14.4 (0.567) W3 7.9 Min (0.311) 10.9 Max (0.429) 11.9 Min (0.469) 15.4 Max (0.606)
12 mm
330.0 (12.992)
1.5 (0.059)
13.0 ± 0.20 (0.512 ± 0.008)
20.2 (0.795)
18.4 (0.724)
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
95
Packaging
