T493C106K025BH6410

KEMET Part Number: T493C106K025BH6410 (07016-121KBHC, DLA Drawing 07016-121KBHC) T493 HRA, Tantalum, MnO2 Tantalum, HRA, 10 uF, 10%, 25 VDC, SMD, MnO2, Molded, DLA Drawing, B (0.1%/1000 Hrs), 1.5 Ohms, 6032, Height Max = 2.8mm General Information Series: Dielectric: Style: Description: RoHS: Prop 65: REACH: SCIP Number: Termination: Dimensions Footprint AEC-Q200: T493 HRA MnO2 Tantalum SMD Chip SMD, MnO2, Molded, DLA Drawing No WARNING: Cancer and reproductive harm www.p65warnings.ca.gov. SVHC (Pb – CAS 7439-92-1) 1dd2e1b8-26dd-4d52-927c-6f9d519011aa Solder Coated No 6032 L 6mm +/-0.3mm W 3.2mm +/-0.3mm H 2.5mm +/-0.3mm S 1.3mm +/-0.3mm F 2.2mm +/-0.1mm Packaging Specifications Weight: Packaging: Packaging Quantity: 224.2 mg T&R, 178mm 500 Specifications Capacitance: Capacitance Tolerance: 10 uF Temperature Range: 10% 25 VDC (85C), 16.75 VDC (125C) -55/+125°C Rated Temperature: 85°C Dissipation Factor: 6% 120Hz 25C Voltage DC: Failure Rate: Resistance: Leakage Current: Testing and Reliability: B (0.1%/1000 Hrs) 1.5 Ohms (100kHz 25C) 2.5 uA (5min 25°C) 10 Cycles Surge Current Testing At -55C And +85C Before Weibull Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. Generated 4/02/2021 - 0b40e354-2ce2-4ca9-83c0-c5fa3ff0d1a1 © 2006 - 2021 KEMET