T495D107K016ATA100

Tantalum Surface Mount Capacitors – Automotive Grade T495 Automotive Grade Surge Robust Low ESR MnO2 Overview The low ESR, surge-robust T495 Automotive, is designed for demanding applications that require high surge current and high ripple current capability. The T495 automotive products build upon the proven capabilities of our industrial grade tantalum chip capacitors to offer several advantages such as low ESR, high ripple current capability, excellent capacitance stability, and improved resistance to high in-rush currents. These benefits are achieved through a combination of proprietary design, materials, and process parameters, as well as high-stress, low impedance electrical conditioning performed prior to screening. The T495 automotive is classified as moisture sensitivity level (MSL)1 under J STD 020, with unlimited floorlife time at ≤ 30°C/85% RH. Benefits • Comply with the automotive AEC–Q200 certification • Meets or exceeds EIA standard 535BAAC • Tape & Reel standard packaging per EIA 481 • High surge current capability • Optional gold-plated terminations • High ripple current capability • 100% surge current test • 100% steady-state accelerated aging • Capacitance values of 0.33 – 680 μF • Tolerances of ±10% and ±20% • Voltage rating of 6.3 – 50 VDC • Extended range values • RoHS compliant and lead-free terminations • Operating temperature range of −55°C to +125°C Applications Typical applications include decoupling and filtering in automotive end applications, such as DC/DC converters, portable electronics, telecommunications, and control units requiring high ripple current capability. Environmental Compliance RoHS compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder, Gold-plated or Non-magnetic 100% Sn solder. One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2052_T495_AUTO • 4/13/2020 1 Tantalum Surface Mount Capacitors – Automotive Grade T495 Series Automotive Grade Surge Robust Low ESR MnO 2 K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Ordering Information T 495 X 107 Capacitor Class Series Case Size Capacitance Code (pF) A B C D E T V X First two digits represent significant figures. Third digit specifies number of zeros. T= Tantalum Surge Robust Low ESR M 010 Capacitance Rated Voltage Tolerance (VDC) K = ±10% M = ±20% 2R5 = 2.5 004 = 4 006 = 6.3 010 = 10 016 = 16 020 = 20 025 = 25 035 = 35 050 = 50 A T A080 Failure Rate/ Design Termination Finish ESR T = 100% Matte tin (Sn)-plated H = Standard solder coated (SnPb 5% Pb minimum) G = Gold-plated (A, B, C, D, X only) N = Non-magnetic 100% tin (Sn) M = Non-magnetic (SnPb) A = AUTO grade product 080 = Maximum ESR in mΩ at room temperature (80 mΩ) A= N/A Packaging (C-Spec) Blank = 7" reel 7280 = 13" reel Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range −55°C to 125°C 0.33 – 680 µF at 120 Hz/25°C K tolerance (10%), M tolerance (20%) 6.3 – 50 V DF (120 Hz) Refer to Part Number Electrical Specification Table ESR (100 kHz) Refer to Part Number Electrical Specification Table Leakage Current ≤ 0.01 CV (µA) at rated voltage after 5 minutes © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2052_T495_AUTO • 4/13/2020 2 Tantalum Surface Mount Capacitors – Automotive Grade T495 Series Automotive Grade Surge Robust Low ESR MnO 2 Qualification Test Condition Characteristics Δ C/C Endurance 85°C at rated voltage, 2,000 hours 125°C at 2/3 rated voltage, 2,000 hours Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits Δ C/C Storage Life 125°C at 0 volts, 2,000 hours Temperature Stability MIL–STD–202, Method 107, Condition B, mounted, −55°C to 125° C, 1,000 cycles Extreme temperature exposure at a succession of continuous steps at +25°C, −55°C, +25°C, +85°C, +125°C, +25°C. Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits Mechanical Shock/ Vibration Within ±5% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits +25°C −55°C +85°C +125°C Δ C/C IL* ±10% ±10% ±20% DF IL IL 1.5 x IL 1.5 x IL DCL IL N/A 10 x IL 12 x IL Δ C/C Surge Voltage Within ±10% of initial value DF Δ C/C Thermal Shock Within ±10% of initial value DF 85°C, 1.32 x rated voltage 1,000 cycles (125°C, 1.2 x rated voltage). MIL–STD–202, Method 213, Condition I, 100 G peak MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz, 20 G peak Within ±5% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits Δ C/C Within ±10% of initial value DF Within initial limits DCL Within initial limits *IL = Initial limit Certification KEMET’s Internal Qualification Plan for this Tantalum series of capacitors follows AEC–Q200 guidelines. Standard catalog part types ordered without a specific automotive designator, i.e., suffix AUTO or four digit customer specific designator (C Spec), are not considered KEMET automotive grade tantalum capacitors. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2052_T495_AUTO • 4/13/2020 3 Tantalum Surface Mount Capacitors – Automotive Grade T495 Series Automotive Grade Surge Robust Low ESR MnO 2 Electrical Characteristics Capacitance vs. Frequency ESR vs. Frequency 1,000 100 T495C476M016ATE350 T495D157M016ATE085_IMP T495D157M016ATE085 T495X227M016ATE100_IMP T495X227M016ATE100 T495C476M016ATE350_ESR Capacitance (μF) Impedance, ESR (Ohms) T495C476M016ATE350_IMP 10 T495D157M016ATE085_ESR T495X227M016ATE100_ESR 1 100 10 0.1 0.01 100 1,000 10,000 100,000 1,000,000 Frequency (Hz) 1 10,000,000 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 Dimensions – Millimeters (Inches) Metric will govern CATHODE (-) END VIEW SIDE VIEW ANODE (+) END VIEW BOTTOM VIEW A B W B H X E T S G S Termination cutout at KEMET's option, either end Case Size KEMET EIA P R Glue pad shape/design at KEMET's option F L Total Weight Component L W H F ±0.1 ±(0.004) S B ±0.15 (Ref) ±0.006 X (Ref) P R T A G E (Ref) (Ref) (Ref) (Min) (Ref) (Ref) (mg) A 3.2±0.2 1.6±0.2 1.6 ±0.2 3216–18 (0.126±0.008) (0.063±0.008) (0.063 ±0.008) 1.2 (0.047) 0.80 (0.032) +0.2 (0.008)/−0.3(0.011) 0.4 (0.016) 0.10±0.10 0.4 0.4 0.13 1.2 1.1 1.3 (0.004±0.004) (0.016) (0.016) (0.005) (0.047) (0.043) (0.051) 58.60 B 3.5±0.2 2.8±0.2 1.9 ±0.2 3528–21 (0.138±0.008) (0.110±0.008) (0.075 ±0.008) 2.2 (0.087) 0.80 (0.032) +0.1 (0.004)/−0.3(0.011) 0.4 (0.016) 0.10±0.10 0.5 1.0 0.13 1.9 1.8 2.2 (0.004±0.004) (0.020) (0.039) (0.005) (0.075) (0.071) (0.087) 107.45 C 6.0±0.3 3.2±0.3 2.5 ±0.3 6032–28 (0.236±0.012) (0.126±0.012) (0.098 ±0.012) 2.2 (0.087) 1.3 (0.051) ±0.3 (0.012) 0.5 (0.020) 0.10±0.10 0.9 1.0 0.13 2.9 2.8 2.4 (0.004±0.004) (0.035) (0.039) (0.005) (0.114) (0.110) (0.094) 224.48 D 7.3±0.3 4.3±0.3 2.8 ±0.3 7343–31 (0.287±0.012) (0.169±0.012) (0.110 ±0.012) 2.4 (0.094) 1.3 (0.051) ±0.3 (0.012) 0.5 (0.020) 0.10±0.10 0.9 1.0 0.13 3.6 3.5 3.5 (0.004±0.004) (0.035) (0.039) (0.005) (0.142) (0.138) (0.138) 446.84 X 7.3±0.3 4.3±0.3 4.0 ±0.3 7343-43 (0.287±0.012) (0.169±0.012) (0.157 ±0.012) 2.4 (0.094) 1.3 (0.051) ±0.3 (0.012) 0.5 (0.020) 0.10±0.10 1.7 1.0 0.13 3.6 3.5 3.5 (0.004±0.004) (0.067) (0.039) (0.005) (0.142) (0.138) (0.138) 652.04 Notes: (Ref) – Dimensions provided for reference only. For low profile cases, no dimensions are provided for B, P or R because these cases do not have a bevel or a notch. These weights are provided as reference. If exact weights are needed, please contact your KEMET Sales Representative. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2052_T495_AUTO • 4/13/2020 4 Tantalum Surface Mount Capacitors – Automotive Grade T495 Series Automotive Grade Surge Robust Low ESR MnO 2 Table 1 – Ratings & Part Number Reference Rated Rated Voltage Cap Case Code/ Case Size KEMET Part Number DC Leakage VDC at 85°C µF KEMET/EIA (See below for part options) µA at +20°C Max/5 Min 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 10 10 10 10 10 10 10 10 2.2 3.3 4.7 6.8 10 10 10 15 22 22 22 22 33 33 33 47 68 68 68 100 100 100 100 100 150 150 150 220 220 220 220 330 330 330 470 470 680 1.5 2.2 3.3 4.7 4.7 4.7 6.8 6.8 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 A/3216-18 A/3216-18 B/3528-21 C/6032-28 C/6032-28 A/3216-18 B/3528-21 C/6032-28 B/3528-21 B/3528-21 C/6032-28 D/7343-31 B/3528-21 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 C/6032-28 D/7343-31 D/7343-31 X/7343-43 D/7343-31 D/7343-31 X/7343-43 D/7343-31 X/7343-43 X/7343-43 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 A/3216-18 B/3528-21 T495A225(1)006A(2)A5K0 T495A335(1)006A(2)A3K0 T495A475(1)006A(2)A3K5 T495A685(1)006A(2)A2K0 T495A106(1)006A(2)A2K0 T495A106(1)006A(2)A4K0 T495B106(1)006A(2)A1K0 T495A156(1)006A(2)A2K0 T495A226(1)006A(2)A1K5 T495B226(1)006A(2)A500 T495C226(1)006A(2)A380 T495C226(1)006A(2)A2K0 T495A336(1)006A(2)A1K0 T495B336(1)006A(2)A600 T495C336(1)006A(2)A350 T495B476(1)006A(2)A500 T495B686(1)006A(2)A500 T495C686(1)006A(2)A400 T495D686(1)006A(2)A180 T495B107(M)006A(2)A700 T495C107(1)006A(2)A1K2 T495C107(1)006A(2)A150 T495D107(1)006A(2)A150 T495D107(1)006A(2)A130 T495D157(1)006A(2)A100 T495D157(1)006A(2)A125 T495X157(1)006A(2)A100 T495C227(1)006A(2)A225 T495D227(1)006A(2)A100 T495D227(1)006A(2)A800 T495X227(1)006A(2)A100 T495D337(1)006A(2)A100 T495D337(1)006A(2)A800 T495X337(1)006A(2)A100 T495D477(1)006A(2)A150 T495X477(1)006A(2)A100 T495X687(1)006A(2)A100 T495A155(1)010A(2)A5K0 T495A225(1)010A(2)A2K0 T495A335(1)010A(2)A5K5 T495A475(1)010A(2)A2K0 T495A475(1)010A(2)A4K5 T495B475(1)010A(2)A1K5 T495A685(1)010A(2)A2K0 T495B685(1)010A(2)A1K2 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.9 1.4 1.4 1.4 1.4 2.1 2.1 2.1 3.0 4.3 4.3 4.3 6.3 6.3 6.3 6.3 6.3 9.5 9.5 9.5 13.9 13.9 13.9 13.9 20.8 20.8 20.8 29.6 29.6 42.8 0.5 0.5 0.5 0.5 0.5 0.5 0.7 0.7 VDC at 85°C µF KEMET/EIA (See below for part options) µA at +20°C Max/5 Min Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current (rms) % at +20°C mΩ at 20°C mA at mA at +25°C mA at +85°C 120 Hz 100 kHz +125°C 100 100 kHz 100 kHz Max Max kHz 6 5000 122 110 49 6 3000 158 142 63 6 3500 146 131 58 6 2000 194 175 78 6 2000 194 175 78 6 4000 137 130 87 6 1000 292 263 117 6 2000 194 175 78 6 1500 224 202 90 6 500 412 371 165 6 380 538 484 215 6 2000 234 222 148 12 1000 274 247 110 6 600 376 338 150 6 350 561 505 224 6 500 412 371 165 8 500 412 371 165 6 400 524 472 210 4 180 913 822 365 15 700 348 313 139 8 1200 303 287 191 8 150 856 770 342 8 150 1000 900 400 8 130 1074 1019 679 6 100 1225 1103 490 6 125 1095 986 438 6 100 1285 1157 514 10 225 699 629 280 8 100 1225 1103 490 8 800 433 411 274 8 100 1285 1157 514 8 100 1225 1103 490 8 800 433 411 274 1285 1157 514 8 100 12 150 1000 900 400 10 100 1285 1157 514 12 100 1285 1157 514 6 5000 122 110 49 6 2000 194 175 78 6 5500 117 105 47 6 2000 194 175 78 6 4500 129 122 82 6 1500 238 214 95 6 1800 204 184 82 6 1200 266 239 106 % at +20°C mΩ at 20°C mA at mA at +25°C mA at +85°C 120 Hz 100 kHz +125°C 100 100 kHz 100 kHz Max Max kHz DF ESR Maximum Allowable Ripple Current (rms) Maximum Operating MSL Temp °C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 °C Maximum Operating Temp Reflow Temp ≤ 260°C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp ≤ 260°C MSL (1) To complete KEMET part number, insert M for ± 20% or K for ± 10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2052_T495_AUTO • 4/13/2020 5 Tantalum Surface Mount Capacitors – Automotive Grade T495 Series Automotive Grade Surge Robust Low ESR MnO 2 Table 1 – Ratings & Part Number Reference cont. Rated Rated Voltage Cap Case Code/ Case Size KEMET Part Number DC Leakage VDC at 85°C µF KEMET/EIA (See below for part options) µA at +20°C Max/5 Min 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 6.8 10 10 10 10 15 15 15 22 22 22 22 22 22 22 33 33 33 33 33 47 47 47 47 47 47 68 68 68 68 68 100 100 100 100 100 100 150 150 220 220 220 220 220 330 B/3528-21 A/3216-18 B/3528-21 B/3528-21 C/6032-28 A/3216-18 B/3528-21 C/6032-28 A/3216-18 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 B/3528-21 B/3528-21 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 X/7343-43 B/3528-21 C/6032-28 D/7343-31 C/6032-28 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 X/7343-43 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 T495B685(1)010A(2)A1K1 T495A106(1)010A(2)A2K0 T495B106(1)010A(2)A3K0 T495B106(1)010A(2)A1K2 T495C106(1)010A(2)A400 T495A156(1)010A(2)A1K8 T495B156(1)010A(2)A900 T495C156(1)010A(2)A475 T495A226(1)010A(2)A1K5 T495B226(1)010A(2)A2K3 T495B226(1)010A(2)A1K5 T495C226(1)010A(2)A1K6 T495C226(1)010A(2)A380 T495C226(1)010A(2)A350 T495C226(1)010A(2)A245 T495B336(1)010A(2)A650 T495B336(1)010A(2)A1K5 T495C336(1)010A(2)A1K5 T495C336(1)010A(2)A380 T495C336(1)010A(2)A300 T495B476(1)010A(2)A650 T495B476(1)010A(2)A500 T495C476(1)010A(2)A1K4 T495C476(1)010A(2)A300 T495D476(1)010A(2)A080 T495D476(1)010A(2)A200 T495D686(1)010A(2)A100 T495X686(1)010A(2)A150 T495B686(1)010A(2)A900 T495C686(1)010A(2)A200 T495D686(1)010A(2)A080 T495C107(1)010A(2)A1K2 T495D107(1)010A(2)A080 T495D107(1)010A(2)A100 T495D107(1)010A(2)A800 T495X107(1)010A(2)A150 T495X107(1)010A(2)A100 T495D157(1)010A(2)A100 T495X157(1)010A(2)A100 T495D227(1)010A(2)A100 T495D227(1)010A(2)A125 T495D227(1)010A(2)A800 T495X227(1)010A(2)A100 T495X227(1)010A(2)A600 T495D337(1)010A(2)A100 0.7 1.0 1.0 1.0 1.0 1.5 1.5 1.5 2.2 2.2 2.2 2.2 2.2 2.2 2.2 3.3 3.3 3.3 3.3 3.3 4.7 4.7 4.7 4.7 4.7 4.7 6.8 6.8 6.8 6.8 6.8 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 22.0 22.0 22.0 22.0 22.0 33.0 VDC at 85°C µF KEMET/EIA (See below for part options) µA at +20°C Max/5 Min Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current (rms) % at +20°C mΩ at 20°C mA at mA at +25°C mA at +85°C 120 Hz 100 kHz +125°C 100 100 kHz 100 kHz Max Max kHz 6 1100 278 264 176 6 2000 194 175 78 6 3000 97 88 39 6 1200 266 239 106 6 400 524 472 210 6 1800 204 184 82 6 900 307 276 123 6 475 481 433 192 8 1500 224 202 90 6 2300 192 173 77 6 1500 238 226 150 6 1600 111 100 44 6 380 538 484 215 6 350 561 505 224 6 245 670 636 423 6 650 362 326 145 6 1500 111 100 44 6 1500 271 257 171 6 380 538 484 215 6 300 606 545 242 6 650 362 326 145 6 500 412 371 165 6 1400 280 266 177 6 300 606 545 242 4 80 1369 1232 548 4 200 866 779 346 6 100 1225 1103 490 4 150 1049 944 420 8 900 307 276 123 6 200 742 668 297 6 80 1369 1232 548 8 1200 303 287 191 8 80 1369 1232 548 1225 1103 490 8 100 8 800 433 411 274 6 150 1049 944 420 6 100 1285 1157 514 8 100 1225 1103 490 8 100 1285 1157 514 8 100 1225 1103 490 8 125 1095 986 438 10 800 433 411 274 8 100 1285 1157 514 8 600 524 497 829 10 100 1225 1103 490 % at +20°C mΩ at 20°C mA at mA at +25°C mA at +85°C 120 Hz 100 kHz +125°C 100 100 kHz 100 kHz Max Max kHz DF ESR Maximum Allowable Ripple Current (rms) Maximum Operating MSL Temp °C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 °C Maximum Operating Temp Reflow Temp ≤ 260°C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp ≤ 260°C MSL (1) To complete KEMET part number, insert M for ± 20% or K for ± 10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2052_T495_AUTO • 4/13/2020 6 Tantalum Surface Mount Capacitors – Automotive Grade T495 Series Automotive Grade Surge Robust Low ESR MnO 2 Table 1 – Ratings & Part Number Reference cont. Rated Rated Voltage Cap Case Code/ Case Size KEMET Part Number DC Leakage VDC at 85°C µF KEMET/EIA (See below for part options) µA at +20°C Max/5 Min 10 10 10 10 10 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 330 330 330 470 470 1 1 1.5 2.2 2.2 3.3 3.3 3.3 4.7 4.7 4.7 4.7 6.8 10 10 10 10 15 15 15 22 22 22 22 22 33 33 33 33 33 33 47 47 47 47 47 47 47 68 68 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 A/3216-18 A/3216-18 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 A/3216-18 B/3528-21 C/6032-28 B/3528-21 B/3528-21 C/6032-28 C/6032-28 D/7343-31 B/3528-21 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 C/6032-28 D/7343-31 T495D337(1)010A(2)A125 T495D337(1)010A(2)A150 T495X337(1)010A(2)A100 T495X477(1)010A(2)A100 T495X477(1)010A(2)A200 T495A105(1)016A(2)A5K0 T495A105(1)016A(2)A10K T495A155(1)016A(2)A5K0 T495A225(1)016A(2)A2K5 T495A225(1)016A(2)A6K5 T495A335(1)016A(2)A3K0 T495A335(1)016A(2)A5K0 T495B335(1)016A(2)A2K0 T495A475(1)016A(2)A2K0 T495A475(1)016A(2)A4K0 T495B475(1)016A(2)A1K5 T495B475(1)016A(2)A3K5 T495B685(1)016A(2)A1K2 T495B106(1)016A(2)A1K6 T495B106(1)016A(2)A2K5 T495C106(1)016A(2)A450 T495C106(1)016A(2)A2K0 T495A156(1)016A(2)A2K5 T495B156(1)016A(2)A800 T495C156(1)016A(2)A400 T495B226(1)016A(2)A1K8 T495B226(1)016A(2)A700 T495C226(1)016A(2)A1K5 T495C226(1)016A(2)A350 T495D226(1)016A(2)A1K1 T495B336(1)016A(2)A350 T495C336(1)016A(2)A1K4 T495C336(1)016A(2)A300 T495D336(1)016A(2)A200 T495D336(1)016A(2)A250 T495D336(1)016A(2)A1K0 T495C476(1)016A(2)A1K4 T495C476(1)016A(2)A350 T495D476(1)016A(2)A100 T495D476(1)016A(2)A120 T495D476(1)016A(2)A150 T495D476(1)016A(2)A180 T495D476(1)016A(2)A300 T495C686(1)016A(2)A250 T495D686(1)016A(2)A150 33.0 33.0 33.0 47.0 47.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.8 0.8 0.8 0.8 1.1 1.6 1.6 1.6 1.6 2.4 2.4 2.4 3.5 3.5 3.5 3.5 3.5 5.3 5.3 5.3 5.3 5.3 5.3 7.5 7.5 7.5 7.5 7.5 7.5 7.5 10.9 10.9 VDC at 85°C µF KEMET/EIA (See below for part options) µA at +20°C Max/5 Min Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current (rms) % at +20°C mΩ at 20°C mA at mA at +25°C mA at +85°C 120 Hz 100 kHz +125°C 100 100 kHz 100 kHz Max Max kHz 10 125 1095 986 438 10 150 1000 900 400 10 100 1285 1157 514 10 100 1285 1157 514 10 200 908 817 363 6 5000 122 110 49 4 10000 87 82 55 6 5000 122 110 49 6 2500 173 156 69 6 6500 107 102 68 6 3000 158 142 63 6 5000 122 116 77 6 2000 206 185 82 6 2000 194 175 78 6 4000 137 130 87 6 1500 238 214 95 6 3500 156 148 99 6 1200 266 239 106 6 1600 230 207 92 6 2500 184 166 74 8 450 494 445 198 6 2000 234 222 148 8 2500 173 156 69 6 800 326 293 130 6 400 524 497 262 6 1800 217 206 137 6 700 348 313 139 6 1500 271 257 171 6 350 561 505 224 6 1100 1000 949 632 6 350 493 444 197 6 1400 280 266 177 6 300 606 545 242 866 779 346 6 200 6 250 775 698 310 6 1000 387 367 245 6 1400 280 266 177 6 350 561 505 224 6 100 1225 1162 775 6 120 1118 1006 447 6 150 1000 900 400 6 180 913 822 365 6 800 433 390 173 6 250 663 597 265 6 150 1000 900 400 % at +20°C mΩ at 20°C mA at mA at +25°C mA at +85°C 120 Hz 100 kHz +125°C 100 100 kHz 100 kHz Max Max kHz DF ESR Maximum Allowable Ripple Current (rms) Maximum Operating MSL Temp °C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 °C Maximum Operating Temp Reflow Temp ≤ 260°C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp ≤ 260°C MSL (1) To complete KEMET part number, insert M for ± 20% or K for ± 10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2052_T495_AUTO • 4/13/2020 7 Tantalum Surface Mount Capacitors – Automotive Grade T495 Series Automotive Grade Surge Robust Low ESR MnO 2 Table 1 – Ratings & Part Number Reference cont. Rated Rated Voltage Cap Case Code/ Case Size KEMET Part Number DC Leakage VDC at 85°C µF KEMET/EIA (See below for part options) µA at +20°C Max/5 Min 16 16 16 16 16 16 16 16 16 16 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 25 25 25 68 100 100 100 100 100 150 150 150 220 1 1.5 2.2 2.2 2.2 3.3 4.7 4.7 4.7 6.8 6.8 10 10 10 15 15 15 22 22 22 22 33 33 33 47 47 47 47 68 68 100 100 1 1 1.5 X/7343-43 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 D/7343-31 X/7343-43 X/7343-43 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 B/3528-21 A/3216-18 B/3528-21 B/3528-21 B/3528-21 C/6032-28 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 X/7343-43 D/7343-31 X/7343-43 A/3216-18 A/3216-18 B/3528-21 T495X686(1)016A(2)A150 T495D107(1)016A(2)A100 T495D107(1)016A(2)A130 T495D107(1)016A(2)A150 T495X107(1)016A(2)A100 T495X107(1)016A(2)A800 T495D157(1)016A(2)A130 T495D157(1)016A(2)A150 T495X157(1)016A(2)A100 T495X227(1)016A(2)A100 T495A105(1)020A(2)A5K0 T495A155(1)020A(2)A4K5 T495A225(1)020A(2)A3K0 T495A225(1)020A(2)A6K0 T495B225(1)020A(2)A1K5 T495B335(1)020A(2)A1K5 T495A475(1)020A(2)A2K0 T495B475(1)020A(2)A1K0 T495B475(1)020A(2)A3K0 T495B685(1)020A(2)A1K0 T495C685(1)020A(2)A480 T495B106(1)020A(2)A1K0 T495C106(1)020A(2)A1K6 T495C106(1)020A(2)A475 T495C156(1)020A(2)A1K5 T495C156(1)020A(2)A400 T495D156(1)020A(2)A275 T495C226(1)020A(2)A1K4 T495D226(1)020A(2)A1K0 T495D226(1)020A(2)A200 T495D226(1)020A(2)A180 T495D336(1)020A(2)A200 T495D336(1)020A(2)A800 T495X336(1)020A(2)A200 T495D476(1)020A(2)A250 T495D476(1)020A(2)A800 T495X476(1)020A(2)A150 T495X476(1)020A(2)A100 T495D686(1)020A(2)A300 T495X686(1)020A(2)A120 T495D107(1)020A(2)A200 T495X107(1)020A(2)A150 T495A105(1)025A(2)A5K0 T495A105(1)025A(2)A8K0 T495B155(1)025A(2)A1K5 10.9 16.0 16.0 16.0 16.0 16.0 24.0 24.0 24.0 35.2 0.5 0.5 0.5 0.5 0.5 0.7 0.9 0.9 0.9 1.4 1.4 2.0 2.0 2.0 3.0 3.0 3.0 4.4 4.4 4.4 4.4 6.6 6.6 6.6 9.4 9.4 9.4 9.4 13.6 13.6 20.0 20.0 0.5 0.5 0.5 VDC at 85°C µF KEMET/EIA (See below for part options) µA at +20°C Max/5 Min Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current (rms) % at +20°C mΩ at 20°C mA at mA at +25°C mA at +85°C 120 Hz 100 kHz +125°C 100 100 kHz 100 kHz Max Max kHz 8 150 1049 944 420 8 100 1225 1162 775 8 130 1074 967 430 8 150 1000 900 400 8 100 1285 1157 514 8 800 454 431 287 8 130 1074 967 430 8 150 1000 900 400 8 100 1285 1157 514 8 100 1285 1157 514 4 5000 122 110 49 6 4500 129 116 52 6 3000 158 142 63 6 6000 119 106 71 6 1500 238 214 95 6 1500 238 214 95 6 2000 194 175 78 6 1000 292 263 117 6 3000 168 160 106 6 1000 292 263 117 6 480 479 431 192 6 1000 292 263 117 6 1600 262 249 166 6 475 481 433 192 6 1500 271 257 171 6 400 524 472 210 4 275 739 665 296 6 1400 280 266 177 6 1000 387 367 245 4 200 870 783 348 4 180 913 822 365 6 200 866 779 346 6 800 433 411 274 908 817 363 8 200 6 250 775 698 310 6 800 433 411 274 4 150 1049 944 420 4 100 1285 1219 812 6 300 707 636 283 6 120 1173 1056 469 8 200 870 783 348 8 150 1049 944 420 4 5000 122 110 49 6 8000 97 92 61 6 1500 238 214 95 % at +20°C mΩ at 20°C mA at mA at +25°C mA at +85°C 120 Hz 100 kHz +125°C 100 100 kHz 100 kHz Max Max kHz DF ESR Maximum Allowable Ripple Current (rms) Maximum Operating MSL Temp °C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 °C Maximum Operating Temp Reflow Temp ≤ 260°C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp ≤ 260°C MSL (1) To complete KEMET part number, insert M for ± 20% or K for ± 10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2052_T495_AUTO • 4/13/2020 8 Tantalum Surface Mount Capacitors – Automotive Grade T495 Series Automotive Grade Surge Robust Low ESR MnO 2 Table 1 – Ratings & Part Number Reference cont. Rated Rated Voltage Cap Case Code/ Case Size KEMET Part Number DC Leakage VDC at 85°C µF KEMET/EIA (See below for part options) µA at +20°C Max/5 Min 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 35 35 35 35 35 35 35 35 35 35 35 35 2.2 2.2 3.3 3.3 4.7 4.7 4.7 6.8 6.8 10 10 10 10 15 15 15 22 22 22 22 33 33 33 47 47 47 47 47 47 68 68 68 100 0.33 0.47 0.47 0.68 1 1 1.5 2.2 2.2 3.3 3.3 4.7 B/3528-21 C/6032-28 B/3528-21 C/6032-28 B/3528-21 B/3528-21 C/6032-28 B/3528-21 C/6032-28 B/3528-21 C/6032-28 C/6032-28 D/7343-31 C/6032-28 D/7343-31 X/7343-43 C/6032-28 D/7343-31 D/7343-31 X/7343-43 D/7343-31 D/7343-31 X/7343-43 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 D/7343-31 X/7343-43 X/7343-43 X/7343-43 A/3216-18 A/3216-18 B/3528-21 A/3216-18 A/3216-18 B/3528-21 B/3528-21 B/3528-21 C/6032-28 B/3528-21 C/6032-28 B/3528-21 T495B225(1)025A(2)A1K2 T495C225(1)025A(2)A1K3 T495B335(1)025A(2)A1K2 T495C335(1)025A(2)A750 T495B475(1)025A(2)A1K0 T495B475(1)025A(2)A3K2 T495C475(1)025A(2)A575 T495B685(1)025A(2)A1K5 T495C685(1)025A(2)A500 T495B106(1)025A(2)A750 T495C106(1)025A(2)A450 T495C106(1)025A(2)A1K6 T495D106(1)025A(2)A125 T495C156(1)025A(2)A300 T495D156(1)025A(2)A275 T495X156(1)025A(2)A200 T495C226(1)025A(2)A900 T495D226(1)025A(2)A200 T495D226(1)025A(2)A800 T495X226(1)025A(2)A230 T495D336(1)025A(2)A200 T495D336(1)025A(2)A800 T495X336(1)025A(2)A200 T495D476(1)025A(2)A120 T495D476(1)025A(2)A150 T495D476(1)025A(2)A250 T495X476(1)025A(2)A800 T495X476(1)025A(2)A120 T495X476(1)025A(2)A100 T495D686(1)025A(2)A200 T495X686(1)025A(2)A200 T495X686(1)025A(2)A150 T495X107(1)025A(2)A150 T495A334(1)035A(2)A7K0 T495A474(1)035A(2)A7K0 T495B474(1)035A(2)A2K5 T495A684(1)035A(2)A6K0 T495A105(1)035A(2)A7K0 T495B105(1)035A(2)A2K0 T495B155(1)035A(2)A2K0 T495B225(1)035A(2)A2K0 T495C225(1)035A(2)A750 T495B335(1)035A(2)A1K0 T495C335(1)035A(2)A600 T495B475(1)035A(2)A1K0 0.6 0.6 0.8 0.8 1.2 1.2 1.2 1.7 1.7 2.5 2.5 2.5 2.5 3.8 3.8 3.8 5.5 5.5 5.5 5.5 8.3 8.3 8.3 11.8 11.8 11.8 11.6 11.8 11.8 17.0 17.0 17.0 25.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.8 0.8 1.2 1.2 1.6 VDC at 85°C µF KEMET/EIA (See below for part options) µA at +20°C Max/5 Min Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current (rms) % at +20°C mΩ at 20°C mA at mA at +25°C mA at +85°C 120 Hz 100 kHz +125°C 100 100 kHz 100 kHz Max Max kHz 6 1200 266 239 106 6 1300 291 262 116 6 1200 266 239 106 6 750 383 345 153 6 1000 292 263 117 6 3200 163 155 103 6 575 437 393 175 6 1500 238 214 95 6 500 469 422 188 6 750 340 306 136 6 450 494 445 198 6 1600 262 249 166 6 1200 354 319 142 6 300 606 545 242 6 275 739 665 296 4 200 908 817 363 6 900 350 315 140 6 200 866 779 346 6 800 433 411 274 4 230 847 762 339 6 200 866 779 346 6 800 433 411 274 4 200 908 817 363 6 120 1118 1006 447 6 150 1000 900 400 6 250 775 735 490 6 800 454 431 287 6 120 1173 1056 469 6 100 1285 1157 514 10 200 866 779 346 6 200 908 817 363 6 150 1049 995 663 10 150 1049 944 420 104 94 42 4 7000 4 7000 104 94 42 4 2500 184 166 74 4 6000 112 101 45 4 7000 104 94 42 4 2000 206 185 82 6 2000 206 185 82 6 2000 206 185 82 6 750 383 345 153 6 1000 292 263 117 6 600 428 385 171 6 1000 292 263 117 % at +20°C mΩ at 20°C mA at mA at +25°C mA at +85°C 120 Hz 100 kHz +125°C 100 100 kHz 100 kHz Max Max kHz DF ESR Maximum Allowable Ripple Current (rms) Maximum Operating MSL Temp °C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 °C Maximum Operating Temp Reflow Temp ≤ 260°C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp ≤ 260°C MSL (1) To complete KEMET part number, insert M for ± 20% or K for ± 10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2052_T495_AUTO • 4/13/2020 9 Tantalum Surface Mount Capacitors – Automotive Grade T495 Series Automotive Grade Surge Robust Low ESR MnO 2 Table 1 – Ratings & Part Number Reference cont. Rated Rated Voltage Cap Case Code/ Case Size KEMET Part Number DC Leakage VDC at 85°C µF KEMET/EIA (See below for part options) µA at +20°C Max/5 Min 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 50 50 50 50 50 50 50 50 50 50 50 50 50 4.7 4.7 4.7 6.8 6.8 6.8 10 10 10 15 15 15 15 22 22 22 22 22 22 33 33 47 0.47 1 1 1.5 2.2 3.3 4.7 4.7 4.7 6.8 10 10 15 C/6032-28 C/6032-28 D/7343-31 C/6032-28 D/7343-31 X/7343-43 D/7343-31 D/7343-31 X/7343-43 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 D/7343-31 X/7343-43 X/7343-43 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 D/7343-31 X/7343-43 X/7343-43 X/7343-43 T495C475(1)035A(2)A700 T495C475(1)035A(2)A2K0 T495D475(1)035A(2)A300 T495C685(1)035A(2)A350 T495D685(1)035A(2)A400 T495X685(1)035A(2)A300 T495D106(1)035A(2)A250 T495D106(1)035A(2)A260 T495X106(1)035A(2)A260 T495D156(1)035A(2)A260 T495D156(1)035A(2)A225 T495X156(1)035A(2)A260 T495X156(1)035A(2)A800 T495D226(1)035A(2)A200 T495D226(1)035A(2)A260 T495D226(1)035A(2)A300 T495X226(1)035A(2)A200 T495X226(1)035A(2)A260 T495X226(1)035A(2)A275 T495D336(1)035A(2)A300 T495X336(1)035A(2)A260 T495X476(1)035A(2)A300 T495C474(1)050A(2)A7K2 T495C105(1)050A(2)A1K6 T495C105(1)050A(2)A4K8 T495C155(1)050A(2)A1K5 T495D225(1)050A(2)A800 T495D335(1)050A(2)A700 T495D475(1)050A(2)A300 T495D475(1)050A(2)A1K2 T495X475(1)050A(2)A300 T495D685(1)050A(2)A400 T495X106(1)050A(2)A300 T495X106(1)050A(2)A800 T495X156(1)050A(2)A300 1.6 1.6 1.6 2.4 2.4 2.4 3.5 3.5 3.5 5.3 5.3 5.3 5.3 7.7 7.7 7.7 7.7 7.7 7.7 11.6 11.6 16.5 0.5 0.5 0.5 0.8 1.1 1.7 2.4 2.4 2.4 3.4 5.0 5.0 7.5 VDC at 85°C µF KEMET/EIA (See below for part options) µA at +20°C Max/5 Min Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current (rms) % at +20°C mΩ at 20°C mA at mA at +25°C mA at +85°C 120 Hz 100 kHz +125°C 100 100 kHz 100 kHz Max Max kHz 6 700 396 356 158 6 2000 234 222 148 6 300 707 636 283 6 350 561 505 224 6 400 612 551 245 4 300 742 668 297 6 250 775 698 310 6 260 760 720 480 4 260 797 717 319 6 260 760 684 304 6 225 816 775 516 6 260 797 717 319 6 800 454 431 287 6 200 866 779 346 6 260 760 684 304 6 300 707 636 283 6 200 908 817 363 6 260 797 717 319 6 275 775 735 490 6 300 707 636 283 6 260 797 717 319 8 300 742 668 297 4 7200 124 117 78 4 1600 262 236 105 4 4800 151 144 96 6 1500 271 244 108 6 800 433 390 173 6 700 463 417 185 6 300 707 636 283 6 1200 354 335 224 4 300 742 704 469 6 400 612 551 245 6 300 742 668 297 454 431 287 6 800 6 300 742 668 297 % at +20°C mΩ at 20°C mA at mA at +25°C mA at +85°C 120 Hz 100 kHz +125°C 100 100 kHz 100 kHz Max Max kHz DF ESR Maximum Allowable Ripple Current (rms) Maximum Operating MSL Temp °C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 °C Maximum Operating Temp Reflow Temp ≤ 260°C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp ≤ 260°C MSL (1) To complete KEMET part number, insert M for ± 20% or K for ± 10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2052_T495_AUTO • 4/13/2020 10 Tantalum Surface Mount Capacitors – Automotive Grade T495 Series Automotive Grade Surge Robust Low ESR MnO 2 Recommended Voltage Derating Guidelines 85°C to 125°C 120% VR 67% of VR 100% 50% of VR 33% of VR % Working Voltage % Change in working DC voltage with temperature Recommended maximum application voltage −55°C to 85°C 80% % Change in Working DC Voltage with Temperature 67% 60% 40% 20% 0% −55 Recommended Maximum Application Voltage (As % of Rated Voltage) 25 33% 85 Temperature (ºC) 125 Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device. Permissible AC ripple voltage which may be applied is limited by two criteria: 1. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. 2. The negative peak AC voltage in combination with bias voltage, if any, must not exceed the allowable limits specified for reverse voltage. See the Reverse Voltage section for allowable limits. The maximum power dissipation by case size can be determined using the table at right. The maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. Refer to the table below for temperature compensation requirements. Temperature Compensation Multipliers for Maximum Ripple Current T ≤ 25°C 1.00 T ≤ 85°C 0.90 T ≤ 125°C 0.40 T= Environmental Temperature The maximum power dissipation rating must be reduced with increasing environmental operating temperatures. Refer to the Temperature Compensation Multiplier table for details. KEMET Series and Case Code EIA Case Code Maximum Power Dissipation (P max) mWatts at 25°C with +20°C Rise A 3216–18 75 B C D X E S T U V T510X 3528–21 6032–28 7343–31 7343–43 7360–38 3216–12 3528–12 6032–15 7343–20 7343–43 85 110 150 165 200 60 70 90 125 270 T510E 7360–38 285 Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = √P max/R E(max) = Z √P max/R I = rms ripple current (amperes) E = rms ripple voltage (volts) P max = maximum power dissipation (watts) R = ESR at specified frequency (ohms) Z = Impedance at specified frequency (ohms) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2052_T495_AUTO • 4/13/2020 11 Tantalum Surface Mount Capacitors – Automotive Grade T495 Series Automotive Grade Surge Robust Low ESR MnO 2 Reverse Voltage Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Permissible Transient Reverse Voltage 25°C 85°C 125°C 15% of Rated Voltage 5% of Rated Voltage 1% of Rated Voltage Table 2 – Land Dimensions/Courtyard KEMET Metric Size Code Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Case EIA W L S V1 V2 W L S V1 V2 W L S V1 V2 A 3216–18 1.35 2.20 0.62 6.02 2.80 1.23 1.80 0.82 4.92 2.30 1.13 1.42 0.98 4.06 2.04 B 3528–21 2.35 2.21 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 C 6032–28 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 D 7343–31 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 E 1 7360–38 4.25 2.77 3.67 10.22 7.30 4.13 2.37 3.87 9.12 6.80 4.03 1.99 4.03 8.26 6.54 T 3528–12 2.35 2.20 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 V 7343–21 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 X1 7343–43 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351). 1 Height of these chips may create problems in wave soldering. 2 Land pattern geometry is too small for silkscreen outline. V1 L L W W V2 S Grid Placement Courtyard © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2052_T495_AUTO • 4/13/2020 12 Tantalum Surface Mount Capacitors – Automotive Grade T495 Series Automotive Grade Surge Robust Low ESR MnO 2 Soldering Process The KEMET families of surface mount capacitors are compatible with wave (single or dual), convection, IR, or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J–STD–020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. Please note that although the X/7343–43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Profile Feature SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Minimum (TSmin) 100°C 150°C Temperature Maximum (TSmax) 150°C 200°C Time (t s) from Tsmin to Tsmax) 60 – 120 seconds 60 – 120 seconds Ramp-up Rate (TL to TP) 3°C/second maximum 3°C/second maximum Liquidous Temperature (TL) 183°C 217°C Time Above Liquidous (t L) 60 – 150 seconds 220°C* 235°C** 60 – 150 seconds 250°C* 260°C** 20 seconds maximum 30 seconds maximum 6°C/second maximum 6°C/second maximum 6 minutes maximum 8 minutes maximum Peak Temperature (TP) Time within 5°C of Maximum Peak Temperature (t P) Ramp-down Rate (TP to TL) Time 25°C to Peak Temperature Note: All temperatures refer to the center of the package, measured on the During typical reflow operations, a slight darkening of the gold-colored epoxy may be observed. This slight darkening is normal and not harmful to the product. Marking permanency is not affected by this change. Temperature Hand soldering should be performed with care due to the package body surface that is facing up during assembly reflow. difficulty in process control. If performed, care should be * For Case Size height > 2.5 mm ** For Case Size height ≤ 2.5 mm taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow TP tP Maximum Ramp-up Rate = 3°C/second occurs. Once reflow occurs, the iron should be removed Maximum Ramp-down Rate = 6°C/second TL immediately. “Wiping” the edges of a chip and heating the top tL surface is not recommended. Tsmax Tsmin 25 ts 25°C to Peak Time Storage Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature – reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability, chip stock should be used promptly, preferably within three years of receipt. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2052_T495_AUTO • 4/13/2020 13 Tantalum Surface Mount Capacitors – Automotive Grade T495 Series Automotive Grade Surge Robust Low ESR MnO 2 Construction Polarity Stripe (+) Molded Epoxy Case Detailed Cross Section Silver Paint (Fourth Layer) Polarity Bevel (+) Tantalum Wire Leadframe (− Cathode) Washer Tantalum Wire Weld (to attach wire) Carbon (Third Layer) Silver Adhesive Leadframe (+ Anode) Molded Epoxy Case MnO2 (Second Layer) Washer Ta2O5 Dielectric (First Layer) Tantalum Capacitor Marking Date Code * Polarity Indicator (+) Picofarad Code 1st digit = last number of year 6 = 2016 7 = 2017 8 = 2018 9 = 2019 0 = 2020 2nd and 3rd digit = week of the year 01 = 1st week of the year to 52 = 52nd week of the year KEMET ID Rated Voltage Date Code* * 908 = 8th week of 2019 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2052_T495_AUTO • 4/13/2020 14 Tantalum Surface Mount Capacitors – Automotive Grade T495 Series Automotive Grade Surge Robust Low ESR MnO 2 Tape & Reel Packaging Information KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. Right hand orientation only (+) Embossed carrier (−) Embossment Top tape thickness 0.10 mm (0.004”) maximum thickness 180 mm (7.0”) or 330 mm (13.”) 8 mm (0.315”) or 12 mm (0.472”) Table 3 – Packaging Quantity Case Code KEMET S T M U L W Z V A B C D Q Y X E/T428P H O EIA 3216-12 3528-12 3528-15 6032-15 6032-19 7343-15 7343-17 7343-20 3216-18 3528-21 6032-28 7343-31 7343-12 7343-40 7343-43 7360-38 7360-20 7360-43 Tape Width (mm) 7" Reel* 13" Reel* 8 8 8 12 12 12 12 12 8 8 12 12 12 12 12 12 12 12 2,500 3,000 2,500 1,000 1,000 1,000 1,000 1,000 2,000 2,000 500 500 1,000 500 500 500 1,000 250 10,000 10,000 8,000 5,000 3,000 3,000 3,000 3,000 9,000 8,000 3,000 2,500 3,000 2,000 2,000 2,000 2,500 1,000 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2052_T495_AUTO • 4/13/2020 15 Tantalum Surface Mount Capacitors – Automotive Grade T495 Series Automotive Grade Surge Robust Low ESR MnO 2 Figure 1 – Embossed (Plastic) Carrier Tape Dimensions P2 T T2 ØD0 P0 (10 pitches cumulative tolerance on tape ±0.2 mm) A0 E1 F K0 B1 E2 B0 S1 W P1 T1 Center Lines of Cavity B1 is for tape feeder reference only, including draft concentric about B0. Embossment For cavity size, see Note 1, Table 4 ØD1 Cover Tape User Direction of Unreeling Table 4 – Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size 8 mm 12 mm D1 Minimum Note 1 D0 1.5 +0.10/−0.0 (0.059 +0.004/−0.0) 1.0 (0.039) 1.5 (0.059) E1 P0 R Reference S1 Minimum T1 T Maximum Note 2 Note 3 Maximum P2 1.75 ±0.10 4.0 ±0.10 2.0 ±0.05 (0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002) 25.0 (0.984) 30 (1.181) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) Variable Dimensions — Millimeters (Inches) Tape Size Pitch B1 Maximum Note 4 8 mm Single (4 mm) 4.35 (0.171) 6.25 (0.246) 12 mm Single (4 mm) and Double (8 mm) 8.2 (0.323) 10.25 (0.404) E2 Minimum F P1 3.5 ±0.05 2.0 ±0.05 or 4.0 ±0.10 (0.138 ±0.002) (0.079 ±0.002 or 0.157 ±0.004) 2.0 ±0.05 (0.079 ±0.002) or 5.5 ±0.05 4.0 ±0.10 (0.157 ±0.004) or (0.217 ±0.002) 8.0 ±0.10 (0.315 ±0.004) T2 Maximum W Maximum A0, B0 & K0 2.5 (0.098) 8.3 (0.327) 4.6 (0.181) 12.3 (0.484) Note 5 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 4). 3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape (see Figure 3). (e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2052_T495_AUTO • 4/13/2020 16 Tantalum Surface Mount Capacitors – Automotive Grade T495 Series Automotive Grade Surge Robust Low ESR MnO 2 Packaging Information Performance Notes 1. Cover tape break force: 1.0 kg minimum. 2. Cover tape peel strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 mm 0.1 to 1.3 newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 2 – Maximum Component Rotation ° T Maximum Component Rotation Top View Maximum Component Rotation Side View Typical Pocket Centerline Tape Width (mm) 8, 12 Bo Maximum Rotation ( 20 ° T) ° s Tape Maximum Width (mm) Rotation ( 8, 12 20 Typical Component Centerline ° S) Ao Figure 3 – Maximum Lateral Movement Figure 4 – Bending Radius 8 mm & 12 mm Tape 0.5 mm maximum 0.5 mm maximum Embossed Carrier Punched Carrier R © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Bending Radius R T2052_T495_AUTO • 4/13/2020 17 Tantalum Surface Mount Capacitors – Automotive Grade T495 Series Automotive Grade Surge Robust Low ESR MnO 2 Figure 5 – Reel Dimensions Full Radius, See Note W3 (Includes flange distortion at outer edge) Access Hole at Slot Location (Ø 40 mm minimum) W2 D A (See Note) N C (Arbor hole diameter) B (see Note) (Measured at hub) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 5 – Reel Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178 ±0.20 (7.008 ±0.008) or 330 ±0.20 (13.000 ±0.008) 1.5 (0.059) 13.0 +0.5/−0.2 (0.521 +0.02/−0.008) 20.2 (0.795) 12 mm Variable Dimensions — Millimeters (Inches) Tape Size 8 mm 12 mm N Minimum W1 W2 Maximum W3 50 (1.969) 8.4 +1.5/−0.0 (0.331 +0.059/−0.0) 12.4 +2.0/−0.0 (0.488 +0.078/−0.0) 14.4 (0.567) 18.4 (0.724) Shall accommodate tape width without interference © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2052_T495_AUTO • 4/13/2020 18 Tantalum Surface Mount Capacitors – Automotive Grade T495 Series Automotive Grade Surge Robust Low ESR MnO 2 Figure 6 – Tape Leader & Trailer Dimensions Embossed Carrier Punched Carrier 8 mm & 12 mm only END Carrier Tape Round Sprocket Holes START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm minimum Components 100 mm minimum Leader 400 mm minimum Top Cover Tape Figure 7 – Maximum Camber Elongated Sprocket Holes (32 mm & wider tapes) Carrier Tape Round Sprocket Holes 1 mm maximum, either direction Straight Edge 250 mm © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2052_T495_AUTO • 4/13/2020 19 Tantalum Surface Mount Capacitors – Automotive Grade T495 Series Automotive Grade Surge Robust Low ESR MnO 2 KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2052_T495_AUTO • 4/13/2020 20