Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
Overview
The low ESR, surge-robust T495 Series is designed for
demanding applications that require high surge current
and high ripple current capability. This series builds upon
the proven capabilities of our industrial grade tantalum
chip capacitors to offer several advantages such as low
ESR, high ripple current capability, excellent capacitance
stability, and improved resistance to high in-rush currents.
These benefits are achieved though a combination of
proprietary design, materials, and process parameters as
well as high-stress, low impedance electrical conditioning
performed prior to screening. This series is classified as MSL
(Moisture Sensitivity Level) 1 under J STD 020: unlimited
floor life time at ≤30°C/85% RH.
Benefits
• Meets or exceeds EIA Standard 535BAAC
• Taped and reeled per EIA 481
• High surge current capability
• Optional gold-plated terminations
• High ripple current capability
• 100% surge current test on C, D, E, U, V, X sizes
• 100% steady-state accelerated aging
• Capacitance values of 0.1 μF to 1,000 μF
• Tolerances of ±10% and ±20%
• Voltage rating of 2.5 – 50 VDC
• Extended range values
• RoHS Compliant and lead-free terminations
• Operating temperature range of −55˚C to +125˚C
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Applications
Typical applications include decoupling and filtering in automotive end applications, such as DC/DC converters, portable
electronics, telecommunications, and control units requiring high ripple current capability.
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder, Gold plated or Non-magnetic
100% Sn solder.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2009_T495 • 5/3/2017
1
Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
K-SIM
For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET
K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels.
Ordering Information
T
495
X
107
Capacitor
Class
Series
Case
Size
Capacitance
Code (pF)
A,
B,
C,
D,
E,
M,
T,
U,
V,
W,
X
First two
digits
represent
significant
figures. Third
digit specifies
number of
zeros.
T=
Tantalum
Surge
Robust
Low ESR
M
010
A
Capacitance Rated Voltage Failure Rate/
Tolerance
(VDC)
Design
K = ±10%
M = ±20%
2R5 = 2.5
004 = 4
006 = 6.3
010 = 10
016 = 16
020 = 20
025 = 25
035 = 35
050 = 50
A = N/A
T
E045
Termination Finish
ESR
T = 100% Matte Tin
(Sn) plated
H = Standard solder
coated
(SnPb 5% Pb minimum)
G = Gold plated
(A, B, C, D, X only)
N = Non-magnetic 100%
Tin (Sn)
M = Non-magnetic (SnPb)
Last three
digits
specify ESR
in mΩ. (45 =
45 mΩ)
Packaging
(C-Spec)
Blank = 7"
Reel
7280 = 13"
Reel
Performance Characteristics
Item
Performance Characteristics
Operating Temperature
Rated Capacitance Range
Capacitance Tolerance
Rated Voltage Range
−55°C to 125°C
0.47 – 1,000 µF at 120 Hz/25°C
K Tolerance (10%), M Tolerance (20%)
2.5 – 50 V
DF (120 Hz)
Refer to Part Number Electrical Specification Table
ESR (100 kHz)
Refer to Part Number Electrical Specification Table
Leakage Current
≤ 0.01 CV (µA) at rated voltage after 5 minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2009_T495 • 5/3/2017
2
Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
Qualification
Test
Condition
Characteristics
Δ C/C
Endurance
85°C at rated voltage, 2,000 hours.
125°C at 2/3 rated voltage, 2,000 hours.
Within initial limits
DCL
Within 1.25 x initial limit
ESR
Within initial limits
Δ C/C
Storage Life
125°C at 0 volts, 2,000 hours.
Temperature Stability
MIL–STD–202, Method 107, Condition B, mounted,
−55C° to 125° C, 1,000 cycles.
Extreme temperature exposure at a
succession of continuous steps at +25ºC,
−55ºC, +25ºC, +85ºC, +125ºC, +25ºC.
Within initial limits
DCL
Within 1.25 x initial limit
ESR
Within initial limits
Mechanical Shock/
Vibration
Within ±5% of initial value
DF
Within initial limits
DCL
Within 1.25 x initial limit
ESR
Within initial limits
+25°C
−55°C
+85°C
+125°C
Δ C/C
IL*
±10%
±10%
±20%
DF
IL
IL
1.5 x IL
1.5 x IL
DCL
IL
N/A
10 x IL
12 x IL
Δ C/C
Surge Voltage
Within ±10% of initial value
DF
Δ C/C
Thermal Shock
Within ±10% of initial value
DF
85°C, 1.32 x rated voltage 1,000 cycles
(125°C, 1.2 x rated voltage).
Within initial limits
DCL
Within initial limits
ESR
Within initial limits
Δ C/C
MIL–STD–202, Method 213, Condition I, 100 G peak
MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000
Hz, 20 G peak
Within ±5% of initial value
DF
Within ±10% of initial value
DF
Within initial limits
DCL
Within initial limits
*IL = Initial limit
Electrical Characteristics
Capacitance vs. Frequency
ESR vs. Frequency
1,000
10
T495C476M016ATE350_IMP
T495C476M016ATE350
T495D157M016ATE085_IMP
T495D157M016ATE085
T495X227M016ATE100
T495X227M016ATE100_IMP
Capacitance (μF)
Impedance, ESR (Ohms)
100
T495C476M016ATE350_ESR
T495D157M016ATE085_ESR
T495X227M016ATE100_ESR
1
100
10
0.1
0.01
100
1
1,000
10,000
100,000
Frequency (Hz)
1,000,000
10,000,000
100
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
1,000
10,000
100,000
Frequency (Hz)
1,000,000
10,000,000
T2009_T495 • 5/3/2017
3
Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
Dimensions – Millimeters (Inches)
Metric will govern
CATHODE (-) END VIEW
SIDE VIEW
ANODE (+) END VIEW
BOTTOM VIEW
A
B
W
B
H
X
T
S
G
S
Termination cutout
at KEMET's option,
either end
Case Size
KEMET
EIA
Glue pad
shape/design at
KEMET's option
E
P
R
F
L
Typical
Weight
Component
L
W
H
F ±0.1
±(0.004)
S
B ±0.15
(Ref)
±0.006
X (Ref)
P
R
T
A
G
E
(Ref) (Ref) (Ref) (Min) (Ref) (Ref)
(mg)
0.4
(0.016)
0.10±0.10
0.4
0.4
0.13
1.2
1.1
1.3
(0.004±0.004) (0.016) (0.016) (0.005) (0.047) (0.043) (0.051)
58.60
0.4
(0.016)
0.10±0.10
0.5
1.0
0.13
1.9
1.8
2.2
(0.004±0.004) (0.020) (0.039) (0.005) (0.075) (0.071) (0.087)
107.45
2.2
(0.087)
0.80 (0.032)
+0.2 (0.008)
/−0.3(0.011)
0.80 (0.032)
+0.1 (0.004)
/−0.3(0.011)
0.8 (0.031)
±0.3 (0.012)
C
6.0±0.3
3.2±0.3
2.5±0.3
2.2
6032–28 (0.236±0.012)
(0.126±0.012) (0.098±0.012) (0.087)
1.3 (0.051)
±0.3 (0.012)
0.5
(0.020)
U
6.0±0.3
3.2±0.2
6032-15 (0.236±0.012)
(0.110±0.008)
2.2
(0.087)
1.3 (0.051)
±0.3 (0.012)
N/A
D
7.3±0.3
4.3±0.3
2.8±0.3
7343–31 (0.287±0.012)
(0.169±0.012) (0.110±0.012)
2.4
(0.094)
1.3 (0.051)
±0.3 (0.012)
0.5
(0.020)
W
7.3±0.3
4.3±0.3
7343-15 (0.287±0.012)
(0.169±0.012)
2.4
(0.094)
1.3 (0.051)
±0.3 (0.012)
N/A
X
7.3±0.3
4.3±0.3
4.0±0.3
7343-43 (0.287±0.012)
(0.169±0.012) (0.157±0.012)
2.4
(0.094)
1.3 (0.051)
±0.3 (0.012)
E
7.3±0.3
6.0±0.3
3.6±0.2
7360-38 (0.287±0.012)
(0.236±0.012) (0.142±0.008)
4.1
(0.161)
T
3.5±0.2
2.8±0.2
3528-12 (0.138±0.008)
(0.110±0.008)
1.2
(0.047)
2.2
(0.087)
V
7.3±0.3
4.3±0.3
7343-20 (0.287±0.012)
(0.169±0.012)
2.0
(0.079)
2.4
(0.094)
1.3 (0.051)
±0.3 (0.012)
0.80 (0.032)
+0.1 (0.004)
/−0.3(0.011)
1.3 (0.051)
±0.3 (0.012)
A
3.2±0.2
1.6±0.2
1.6±0.2
1.2
3216–18 (0.126±0.008)
(0.063±0.008) (0.063±0.008) (0.047)
B
3.5±0.2
2.8±0.2
1.9±0.2
2.2
3528–21 (0.138±0.008)
(0.110±0.008) (0.075±0.008) (0.087)
M
3.5±0.2
2.8±0.2
3528-15 (0.138±0.008)
(0.110±0.008)
1.5
(0.059)
1.5
(0.059)
1.5
(0.059)
1.9
0.13
(0.005) (0.075)
0.10±0.10
0.9
1.0
0.13
2.9
(0.004±0.004) (0.035) (0.039) (0.005) (0.114)
2.9
0.05
0.13
N/A
N/A (0.005)
(0.002)
(0.114)
0.10±0.10
0.9
1.0
0.13
3.6
(0.004±0.004) (0.035) (0.039) (0.005) (0.142)
1.8
2.2
(0.071) (0.087)
97.99
2.8
2.4
(0.110) (0.094)
224.48
2.8
2.4
(0.110) (0.094)
70.00
3.5
3.5
(0.138) (0.138)
446.84
0.13
3.6
3.5
3.5
(0.005) (0.142) (0.138) (0.138)
248.27
0.5
(0.020)
0.10±0.10
1.7
1.0
0.13
3.6
3.5
3.5
(0.004±0.004) (0.067) (0.039) (0.005) (0.142) (0.138) (0.138)
652.04
0.5
(0.020)
0.10±0.10
(0.004±0.004)
N/A
N/A
0.13
3.6
3.5
3.5
(0.005) (0.142) (0.138) (0.138)
803.76
N/A
0.05
(0.002)
N/A
N/A
0.13
1.9
1.8
2.2
(0.005) (0.075) (0.071) (0.087)
63.89
N/A
0.05
(0.002)
N/A
N/A
3.6
0.13
3.5
3.5
(0.005) (0.142) (0.138) (0.138)
286.40
N/A
0.05
(0.002)
0.05
(0.002)
N/A
N/A
N/A
N/A
Notes: (Ref) – Dimensions provided for reference only. For low profile cases, no dimensions are provided for B, P or R because these cases do not have a bevel or
a notch.
These weights are provided as reference. If exact weights are needed, please contact your KEMET Sales Representative
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2009_T495 • 5/3/2017
4
Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
Table 1 – Ratings & Part Number Reference
Rated Rated
Voltage Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA +20°C
Max/5 Min
2.5
2.5
2.5
2.5
2.5
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6.3
6.3
100
220
470
1000
1000
6.8
22
22
33
47
68
68
100
100
150
150
150
150
220
220
220
330
330
330
330
330
470
470
470
470
470
470
680
680
680
1000
1000
1000
1000
1000
1000
1000
1000
2.2
3.3
T/3528-12
D/7343-31
D/7343-31
X/7343-43
X/7343-43
A/3216-18
C/6032-28
C/6032-28
T/3528-12
T/3528-12
T/3528-12
V/7343-20
B/3528-21
D/7343-31
B/3528-21
C/6032-28
C/6032-28
U/6032-15
D/7343-31
D/7343-31
D/7343-31
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
E/7360-38
E/7360-38
A/3216-18
A/3216-18
T495T107(M)2R5A(2)E3K0
T495D227(1)2R5A(2)E045
T495D477(1)2R5A(2)E035
T495X108(1)2R5A(2)E030
T495X108(1)2R5A(2)E040
T495A685(1)004A(2)E2K0
T495C226(1)004A(2)E2K4
T495C226(1)004A(2)E380
T495T336(1)004A(2)E1K2
T495T476(1)004A(2)E1K0
T495T686(1)004A(2)E1K5
T495V686(1)004A(2)E150
T495B107(1)004A(2)E500
T495D107(1)004A(2)E800
T495B157(M)004A(2)E900
T495C157(1)004A(2)E070
T495C157(1)004A(2)E250
T495U157(1)004A(2)E200
T495D227(1)004A(2)E040
T495D227(1)004A(2)E050
T495D227(1)004A(2)E100
T495C337(1)004A(2)E300
T495C337(1)004A(2)E700
T495D337(1)004A(2)E030
T495D337(1)004A(2)E045
T495D337(1)004A(2)E100
T495D477(1)004A(2)E045
T495D477(1)004A(2)E100
T495X477(1)004A(2)E030
T495X477(1)004A(2)E045
T495X477(1)004A(2)E060
T495X477(1)004A(2)E100
T495X687(1)004A(2)E040
T495X687(1)004A(2)E060
T495X687(1)004A(2)E100
T495X108(1)004A(2)E030
T495X108(1)004A(2)E040
T495X108(1)004A(2)E060
T495X108(1)004A(2)E070
T495X108(1)004A(2)E090
T495X108(1)004A(2)E100
T495E108(1)004A(2)E035
T495E108(1)004A(2)E050
T495A225(1)006ATE5K0
T495A335(1)006ATE3K0
2.5
5.5
11.8
25.0
25.0
0.5
0.9
0.9
1.3
1.9
2.7
2.7
4.0
4.0
6.0
6.0
6.0
6.0
8.8
8.8
8.8
13.2
13.2
13.2
13.2
13.2
18.8
18.8
18.8
18.8
18.8
18.8
27.2
27.2
27.2
40.0
40.0
40.0
40.0
40.0
40.0
40.0
40.0
0.5
0.5
VDC at 85ºC
µF
KEMET/EIA
(See below for
part options)
µA +20ºC
Max/5 Min
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
mΩ at 20°C
mA at +25°C
100 kHz
100 kHz
Max
24.0
3000
153
8.0
45
1826
8.0
35
2070
15.0
30
2345
15.0
40
2031
6.0
2000
194
6.0
2400
214
6.0
380
538
8.0
1200
242
10.0
1000
265
20.0
1500
216
6.0
150
913
8.0
500
412
6.0
800
433
12.0
900
307
12.0
70
1254
8.0
250
663
8.0
200
671
8.0
40
1936
8.0
50
1732
8.0
100
1225
10.0
300
606
12.0
700
396
8.0
30
2236
8.0
45
1826
8.0
100
1225
12.0
45
1826
12.0
100
1225
8.0
30
2345
8.0
45
1915
10.0
60
1658
8.0
100
1285
10.0
40
2031
60
1658
10.0
10.0
100
1285
10.0
30
2345
10.0
40
2031
10.0
60
1658
10.0
70
1535
10.0
90
1354
10.0
100
1285
15.0
35
2390
15.0
50
2000
6.0
5000
122
6.0
3000
158
mΩ at 20ºC
mA at +25ºC
% at +20ºC
100 kHz
100 kHz
120 Hz Max
Max
% at +20°C
120 Hz Max
DF
Maximum
Operating
Temp
Maximum Allowable
Ripple Current
ESR
mA at
+85°C 100
kHz
138
1643
1863
2111
1828
175
193
484
218
239
194
822
371
390
276
1129
597
604
1742
1559
1103
545
356
2012
1643
1103
1643
1103
2111
1724
1492
1157
1828
1492
1157
2111
1828
1492
1382
1219
1157
2151
1800
110
142
mA at
+85ºC 100
kHz
mA at
+125°C 100
kHz
61
730
828
938
812
78
86
215
97
106
86
365
165
173
123
502
265
268
774
693
490
242
158
894
730
490
730
490
938
766
663
514
812
663
514
938
812
663
614
542
514
956
800
49
63
mA at
+125ºC 100
kHz
Maximum Allowable
Ripple Current
°C
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
ºC
Maximum
Operating
Temp
MSL
Reflow
Temp
≤ 260°C
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Reflow
Temp
≤ 260ºC
MSL
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2009_T495 • 5/3/2017
5
Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
Table 1 – Ratings & Part Number Reference cont'd
Rated Rated
Voltage Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA +20°C
Max/5 Min
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.8
6.8
6.8
6.8
10
10
10
10
10
10
15
15
22
22
22
22
22
33
33
33
33
47
47
47
47
47
47
47
47
68
68
68
68
68
100
100
100
100
100
100
100
100
100
100
100
A/3216-18
A/3216-18
A/3216-18
C/6032-28
A/3216-18
A/3216-18
A/3216-18
A/3216-18
B/3528-21
T/3528-12
A/3216-18
T/3528-12
A/3216-18
A/3216-18
A/3216-18
B/3528-21
C/6032-28
A/3216-18
B/3528-21
T/3528-12
C/6032-28
B/3528-21
B/3528-21
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
V/7343-20
B/3528-21
C/6032-28
U/6032-15
D/7343-31
D/7343-31
B/3528-21
B/3528-21
M/3528-15
M/3528-15
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
D/7343-31
V/7343-20
T495A685(1)006ATE1K8
T495A685(1)006ATE2K0
T495A685(1)006A(2)E4K5
T495C685(1)006A(2)E480
T495A106(1)006A(2)E800
T495A106(1)006A(2)E1K0
T495A106(1)006A(2)E1K5
T495A106(1)006A(2)E2K0
T495B106(1)006A(2)E1K0
T495T106(1)006A(2)E1K2
T495A156(1)006A(2)E2K0
T495T156(1)006A(2)E1K0
T495A226(1)006A(2)E500
T495A226(1)006A(2)E900
T495A226(1)006A(2)E1K5
T495B226(1)006A(2)E500
T495C226(1)006A(2)E380
T495A336(1)006A(2)E600
T495B336(1)006A(2)E600
T495T336(1)006A(2)E800
T495C336(1)006A(2)E350
T495B476(1)006A(2)E250
T495B476(1)006A(2)E500
T495B476(1)006A(2)E450
T495B476(1)006A(2)E400
T495C476(1)006A(2)E250
T495C476(1)006A(2)E300
T495C476(1)006A(2)E330
T495V476(1)006A(2)E150
T495B686(1)006A(2)E500
T495C686(1)006A(2)E400
T495U686(1)006A(2)E400
T495D686(1)006A(2)E175
T495D686(1)006A(2)E180
T495B107(1)006A(2)E400
T495B107(M)006A(2)E700
T495M107(1)006A(2)E500
T495M107(1)006A(2)E1K0
T495C107(1)006A(2)E075
T495C107(1)006A(2)E150
T495D107(1)006A(2)E050
T495D107(1)006A(2)E130
T495D107(1)006A(2)E150
T495D107(1)006A(2)E800
T495V107(1)006A(2)E090
0.5
0.5
0.5
0.5
0.6
0.6
0.6
0.6
0.6
0.6
0.9
0.9
1.4
1.4
1.4
1.4
1.4
2.1
2.1
2.1
2.1
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
4.3
4.3
4.3
4.3
4.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
VDC at 85ºC
µF
KEMET/EIA
(See below for
part options)
µA +20ºC
Max/5 Min
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
mΩ at 20°C
mA at +25°C
100 kHz
100 kHz
Max
6.0
1800
204
6.0
2000
194
6.0
4500
129
6.0
480
479
6.0
800
306
6.0
1000
274
6.0
1500
224
6.0
2000
194
6.0
1000
292
6.0
1200
242
6.0
2000
194
6.0
1000
265
6.0
500
387
8.0
900
289
8.0
1500
224
6.0
500
412
6.0
380
538
12.0
600
354
6.0
600
376
6.0
800
296
6.0
350
561
6.0
250
583
6.0
500
583
6.0
450
435
6.0
400
461
6.0
250
663
6.0
300
606
6.0
330
577
6.0
150
913
8.0
500
412
6.0
400
524
6.0
400
474
4.0
175
926
180
913
4.0
15.0
400
461
15.0
700
348
20.0
500
490
20.0
1000
346
8.0
75
1211
8.0
150
856
6.0
50
1732
6.0
130
1074
8.0
150
1000
6.0
800
433
8.0
90
1179
mΩ at 20ºC
mA at +25ºC
% at +20ºC
100 kHz
100 kHz
120 Hz Max
Max
% at +20°C
120 Hz Max
DF
Maximum
Operating
Temp
Maximum Allowable
Ripple Current
ESR
mA at
+85°C 100
kHz
184
175
116
431
275
247
202
175
263
218
175
239
348
260
202
371
484
319
338
266
505
525
525
392
415
597
545
519
822
371
472
427
833
822
415
313
441
311
1090
770
1559
967
900
390
1061
mA at
+85ºC 100
kHz
mA at
+125°C 100
kHz
82
78
52
192
122
110
90
78
117
97
78
106
155
116
90
165
215
142
150
118
224
233
233
174
184
265
242
231
365
165
210
190
370
365
184
139
196
138
484
342
693
430
400
173
472
mA at
+125ºC 100
kHz
Maximum Allowable
Ripple Current
°C
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
ºC
Maximum
Operating
Temp
MSL
Reflow
Temp
≤ 260°C
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Reflow
Temp
≤ 260ºC
MSL
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2009_T495 • 5/3/2017
6
Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
Table 1 – Ratings & Part Number Reference cont'd
Rated Rated
Voltage Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA +20°C
Max/5 Min
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
100
150
150
150
150
150
150
150
150
150
150
150
150
220
220
220
220
220
220
220
220
220
220
220
330
330
330
330
330
330
330
330
330
330
330
330
330
330
470
470
470
470
470
470
470
V/7343-20
C/6032-28
C/6032-28
U/6032-15
V/7343-20
V/7343-20
V/7343-20
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
W/7343-15
X/7343-43
X/7343-43
X/7343-43
V/7343-20
C/6032-28
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
V/7343-20
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
E/7360-38
E/7360-38
D/7343-31
D/7343-31
D/7343-31
D/7343-31
V/7343-20
X/7343-43
X/7343-43
T495V107(1)006A(2)E150
T495C157(1)006A(2)E050
T495C157(M)006A(2)E200
T495U157(1)006A(2)E200
T495V157(1)006A(2)E040
T495V157(1)006A(2)E070
T495V157(1)006A(2)E150
T495D157(1)006A(2)E050
T495D157(1)006A(2)E065
T495D157(1)006A(2)E080
T495D157(1)006A(2)E100
T495D157(1)006A(2)E125
T495X157(1)006A(2)E100
T495C227(1)006A(2)E225
T495C227(1)006A(2)E200
T495C227(1)006A(2)E100
T495D227(1)006A(2)E045
T495D227(1)006A(2)E050
T495D227(1)006A(2)E100
T495W227(1)006A(2)E250
T495X227(1)006A(2)E070
T495X227(1)006A(2)E080
T495X227(1)006A(2)E100
T495V227(1)006ATE150
T495C337(1)006A(2)E200
T495D337(1)006A(2)E040
T495D337(1)006A(2)E045
T495D337(1)006A(2)E050
T495D337(1)006A(2)E070
T495D337(1)006A(2)E100
T495V337(1)006A(2)E150
T495X337(1)006A(2)E045
T495X337(1)006A(2)E050
T495X337(1)006A(2)E065
T495X337(1)006A(2)E080
T495X337(1)006A(2)E100
T495E337(1)006A(2)E060
T495E337(1)006A(2)E100
T495D477(1)006A(2)E045
T495D477(1)006A(2)E100
T495D477(1)006A(2)E125
T495D477(1)006A(2)E150
T495V477(1)006A(2)E150
T495X477(1)006A(2)E030
T495X477(1)006A(2)E045
6.3
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
13.9
13.9
13.9
13.9
13.9
13.9
13.9
13.9
13.9
13.9
13.9
20.8
20.8
20.8
20.8
20.8
20.8
20.8
20.8
20.8
20.8
20.8
20.8
20.8
20.8
29.6
29.6
29.6
29.6
29.6
29.6
29.6
VDC at 85ºC
µF
KEMET/EIA
(See below for
part options)
µA +20ºC
Max/5 Min
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
mΩ at 20°C
mA at +25°C
100 kHz
100 kHz
Max
8.0
150
913
8.0
50
1483
8.0
200
742
8.0
200
671
8.0
40
1768
8.0
70
1336
8.0
150
913
6.0
50
1732
6.0
65
1519
6.0
80
1369
6.0
100
1225
6.0
125
1095
6.0
100
1285
10.0
225
699
10.0
200
742
10.0
100
1049
8.0
45
1826
8.0
50
1732
8.0
100
1225
8.0
250
849
8.0
70
1535
8.0
80
1436
8.0
100
1285
8.0
150
913
18.0
200
742
8.0
40
1936
8.0
45
1826
8.0
50
1732
8.0
70
1464
8.0
100
1225
8.0
150
913
8.0
45
1915
8.0
50
1817
65
1593
8.0
8.0
80
1436
8.0
100
1285
8.0
60
1826
8.0
100
1414
12.0
45
1826
12.0
100
1225
12.0
125
1095
12.0
150
1000
15.0
150
913
10.0
30
2345
10.0
45
1915
mΩ at 20ºC
mA at +25ºC
% at +20ºC
100 kHz
100 kHz
120 Hz Max
Max
% at +20°C
120 Hz Max
DF
Maximum
Operating
Temp
Maximum Allowable
Ripple Current
ESR
mA at
+85°C 100
kHz
822
1335
668
604
1591
1202
822
1559
1367
1232
1103
986
1157
629
668
944
1643
1559
1103
764
1382
1292
1157
822
668
1742
1643
1559
1318
1103
822
1724
1635
1434
1292
1157
1643
1273
1643
1103
986
900
822
2111
1724
mA at
+85ºC 100
kHz
mA at
+125°C 100
kHz
365
593
297
268
707
534
365
693
608
548
490
438
514
280
297
420
730
693
490
340
614
574
514
365
297
774
730
693
586
490
365
766
727
637
574
514
730
566
730
490
438
400
365
938
766
mA at
+125ºC 100
kHz
Maximum Allowable
Ripple Current
°C
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
ºC
Maximum
Operating
Temp
MSL
Reflow
Temp
≤ 260°C
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Reflow
Temp
≤ 260ºC
MSL
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2009_T495 • 5/3/2017
7
Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
Table 1 – Ratings & Part Number Reference cont'd
Rated Rated
Voltage Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA +20°C
Max/5 Min
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
470
470
470
470
470
470
470
470
680
680
680
1000
1000
1000
2.2
2.2
3.3
4.7
4.7
4.7
4.7
4.7
4.7
4.7
6.8
6.8
6.8
6.8
10
10
10
10
10
10
10
10
10
10
15
15
15
15
15
15
15
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
E/7360-38
E/7360-38
E/7360-38
X/7343-43
X/7343-43
X/7343-43
X/7343-43
E/7360-38
E/7360-38
A/3216-18
A/3216-18
A/3216-18
A/3216-18
A/3216-18
A/3216-18
A/3216-18
A/3216-18
B/3528-21
B/3528-21
A/3216-18
B/3528-21
B/3528-21
B/3528-21
A/3216-18
A/3216-18
A/3216-18
A/3216-18
B/3528-21
B/3528-21
B/3528-21
B/3528-21
C/6032-28
T/3528-12
A/3216-18
A/3216-18
B/3528-21
B/3528-21
T/3528-12
B/3528-21
C/6032-28
T495X477(1)006A(2)E050
T495X477(1)006A(2)E060
T495X477(1)006A(2)E065
T495X477(1)006A(2)E100
T495X477(1)006A(2)E125
T495E477(1)006A(2)E040
T495E477(1)006A(2)E055
T495E477(1)006A(2)E100
T495X687(1)006A(2)E100
T495X687(1)006A(2)E060
T495X687(1)006A(2)E045
T495X108(1)006A(2)E100
T495E108(1)006A(2)E050
T495E108(1)006A(2)E040
T495A225(1)010A(2)E1K8
T495A225(1)010A(2)E7K0
T495A335(1)010A(2)E2K0
T495A475(1)010A(2)E1K2
T495A475(1)010A(2)E1K3
T495A475(1)010A(2)E1K4
T495A475(1)010A(2)E1K8
T495A475(1)010A(2)E2K0
T495B475(1)010A(2)E1K3
T495B475(1)010A(2)E1K5
T495A685(1)010A(2)E1K8
T495B685(1)010A(2)E900
T495B685(1)010A(2)E1K1
T495B685(1)010A(2)E1K2
T495A106(1)010A(2)E1K8
T495A106(1)010A(2) E2K0
T495A106(1)010A(2) E2K5
T495A106(1)010A(2) E3K8
T495B106(1)010A(2) E600
T495B106(1)010A(2)E750
T495B106(1)010A(2) E1K2
T495B106(1)010A(2)E3K0
T495C106(1)010AT E400
T495T106(1)010AT E1K5
T495A156(1)010AT E1K0
T495A156(1)010AT E1K8
T495B156(1)010AT E600
T495B156(1)010AT E900
T495T156(1)010AT E1K2
T495B156(1)010A(2)E500
T495C156(1)010A(2)E375
29.6
29.6
29.6
29.6
29.6
29.6
29.6
29.6
42.8
42.8
42.8
63.0
63.0
63.0
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.7
0.7
0.7
0.7
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.5
1.5
1.5
1.5
1.5
1.5
1.5
VDC at 85ºC
µF
KEMET/EIA
(See below for
part options)
µA +20ºC
Max/5 Min
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
mΩ at 20°C
mA at +25°C
100 kHz
100 kHz
Max
10.0
50
1817
10.0
60
1658
10.0
65
1593
10.0
100
1285
10.0
125
1149
12.0
40
2236
10.0
55
1907
10.0
100
1414
12.0
100
1285
12.0
60
1658
12.0
45
1915
20.0
100
1285
15.0
50
2000
15.0
40
2236
6.0
1800
204
6.0
7000
104
6.0
2000
194
6.0
1200
250
6.0
1300
240
6.0
1400
231
6.0
1800
204
6.0
2000
194
15.0
1300
256
6.0
1500
238
6.0
1800
204
6.0
900
307
6.0
1100
278
6.0
1200
266
6.0
1800
204
6.0
2000
194
6.0
2500
173
6.0
3800
140
6.0
600
376
750
337
6.0
6.0
1200
266
6.0
3000
168
6.0
400
524
6.0
1500
216
6.0
1000
274
6.0
1800
204
6.0
600
376
6.0
900
307
6.0
1200
242
6.0
500
412
6.0
375
542
mΩ at 20ºC
mA at +25ºC
% at +20ºC
100 kHz
100 kHz
120 Hz Max
Max
% at +20°C
120 Hz Max
DF
Maximum
Operating
Temp
Maximum Allowable
Ripple Current
ESR
mA at
+85°C 100
kHz
1635
1492
1434
1157
1034
2012
1716
1273
1157
1492
1724
1157
1800
2012
184
94
175
225
216
208
184
175
230
214
184
276
250
239
184
175
156
126
338
303
239
151
472
194
247
184
338
276
218
371
488
mA at
+85ºC 100
kHz
mA at
+125°C 100
kHz
727
663
637
514
460
894
763
566
514
663
766
514
800
894
82
42
78
100
96
92
82
78
102
95
82
123
111
106
82
78
69
56
150
135
106
67
210
86
110
82
150
123
97
165
217
mA at
+125ºC 100
kHz
Maximum Allowable
Ripple Current
°C
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
ºC
Maximum
Operating
Temp
MSL
Reflow
Temp
≤ 260°C
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Reflow
Temp
≤ 260ºC
MSL
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2009_T495 • 5/3/2017
8
Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
Table 1 – Ratings & Part Number Reference cont'd
Rated Rated
Voltage Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA +20°C
Max/5 Min
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
15
15
22
22
22
22
22
22
22
22
22
22
22
22
22
22
33
33
33
33
33
47
47
47
47
47
47
47
47
47
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
C/6032-28
C/6032-28
A/3216-18
A/3216-18
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
B/3528-21
B/3528-21
B/3528-21
V/7343-20
V/7343-20
B/3528-21
B/3528-21
C/6032-28
U/6032-15
D/7343-31
D/7343-31
D/7343-31
D/7343-31
V/7343-20
B/3528-21
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
C/6032-28
V/7343-20
V/7343-20
V/7343-20
V/7343-20
D/7343-31
D/7343-31
D/7343-31
D/7343-31
T495C156(1)010A(2)E400
T495C156(1)010A(2)E475
T495A226(1)010AT E1K2
T495A226(1)010AT E1K5
T495B226(1)010AT E400
T495B226(1)010AT E500
T495B226(1)010AT E700
T495B226(1)010AT E800
T495B226(1)010A(2)E2K3
T495C226(1)010A(2)E200
T495C226(1)010A(2)E245
T495C226(1)010A(2)E290
T495C226(1)010A(2)E300
T495C226(1)010A(2)E345
T495C226(1)010A(2)E350
T495C226(1)010A(2)E380
T495B336(1)010A(2)E450
T495B336(1)010A(2)E550
T495B336(1)010A(2)E650
T495V336(1)010A(2)E100
T495V336(1)010A(2)E150
T495B476(1)010A(2)E500
T495B476(1)010A(2)E650
T495C476(1)010A(2)E300
T495U476(1)010A(2)E400
T495D476(1)010A(2)E080
T495D476(1)010A(2)E090
T495D476(1)010A(2)E100
T495D476(1)010A(2)E200
T495V476(1)010A(2)E200
T495B686(1)010A(2)E600
T495B686(1)010A(2)E750
T495B686(M)010A(2)E900
T495C686(1)010A(2)E080
T495C686(1)010A(2)E200
T495C686(1)010A(2)E225
T495C686(1)010A(2)E250
T495V686(1)010A(2)E070
T495V686(1)010A(2)E100
T495V686(1)010A(2)E140
T495V686(1)010A(2)E200
T495D686(1)010A(2)E070
T495D686(1)010A(2)E090
T495D686(1)010A(2)E100
T495D686(1)010A(2)E150
1.5
1.5
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
3.3
3.3
3.3
3.3
3.3
4.7
4.7
4.7
4.7
4.7
4.7
4.7
4.7
4.7
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
VDC at 85ºC
µF
KEMET/EIA
(See below for
part options)
µA +20ºC
Max/5 Min
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
mΩ at 20°C
mA at +25°C
100 kHz
100 kHz
Max
6.0
400
524
6.0
475
481
8.0
1200
250
8.0
1500
224
6.0
400
461
6.0
500
412
6.0
700
348
6.0
800
326
6.0
2300
192
6.0
200
742
6.0
245
670
6.0
290
616
6.0
300
606
6.0
345
565
6.0
350
561
6.0
380
538
6.0
450
435
6.0
550
393
6.0
650
362
6.0
100
1118
6.0
150
913
6.0
500
412
6.0
650
362
6.0
300
606
6.0
400
474
4.0
80
1369
6.0
90
1291
6.0
100
1225
4.0
200
866
6.0
200
791
8.0
600
376
8.0
750
337
8.0
900
307
80
1173
6.0
6.0
200
742
6.0
225
699
6.0
250
663
6.0
70
1336
6.0
100
1118
6.0
140
945
6.0
200
791
6.0
70
1464
6.0
90
1291
6.0
100
1225
6.0
150
1000
mΩ at 20ºC
mA at +25ºC
% at +20ºC
100 kHz
100 kHz
120 Hz Max
Max
% at +20°C
120 Hz Max
DF
Maximum
Operating
Temp
Maximum Allowable
Ripple Current
ESR
mA at
+85°C 100
kHz
472
433
225
202
415
371
313
293
173
668
603
554
545
509
505
484
392
354
326
1006
822
371
326
545
427
1232
1162
1103
779
712
338
303
276
1056
668
629
597
1202
1006
851
712
1318
1162
1103
900
mA at
+85ºC 100
kHz
mA at
+125°C 100
kHz
210
192
100
90
184
165
139
130
77
297
268
246
242
226
224
215
174
157
145
447
365
165
145
242
190
548
516
490
346
316
150
135
123
469
297
280
265
534
447
378
316
586
516
490
400
mA at
+125ºC 100
kHz
Maximum Allowable
Ripple Current
°C
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
ºC
Maximum
Operating
Temp
MSL
Reflow
Temp
≤ 260°C
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Reflow
Temp
≤ 260ºC
MSL
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2009_T495 • 5/3/2017
9
Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
Table 1 – Ratings & Part Number Reference cont'd
Rated Rated
Voltage Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA +20°C
Max/5 Min
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
68
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
150
150
150
150
150
150
150
150
150
150
150
150
220
220
220
220
220
220
220
220
220
220
220
220
X/7343-43
B/3528-21
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
U/6032-15
W/7343-15
V/7343-20
V/7343-20
V/7343-20
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
C/6032-28
V/7343-20
V/7343-20
V/7343-20
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
V/7343-20
V/7343-20
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
T495X686(1)010A(2)E150
T495B107(M)010A(2)E350
T495B107(M)010A(2)E500
T495B107(M)010A(2)E700
T495C107(1)010A(2)E100
T495C107(1)010A(2)E150
T495C107(1)010A(2)E180
T495C107(1)010A(2)E200
T495C107(1)010A(2)E250
T495U107(1)010A(2)E150
T495W107(1)010A(2)E200
T495V107(1)010A(2)E100
T495V107(1)010A(2)E150
T495V107(1)010A(2)E200
T495D107(1)010A(2)E050
T495D107(1)010A(2)E065
T495D107(1)010A(2)E080
T495D107(1)010A(2)E100
T495D107(1)010A(2)E120
T495D107(1)010A(2)E125
T495X107(1)010A(2)E100
T495C157(1)010A(2)E200
T495V157(1)010A(2)E100
T495V157(1)010A(2)E150
T495V157(1)010A(2)E200
T495D157(1)010A(2)E050
T495D157(1)010A(2)E060
T495D157(1)010A(2)E080
T495D157(1)010A(2)E100
T495X157(1)010A(2)E070
T495X157(1)010A(2)E080
T495X157(1)010A(2)E085
T495X157(1)010A(2)E100
T495D227(1)010A(2)E045
T495D227(1)010A(2)E050
T495D227(1)010A(2)E075
T495D227(1)010A(2)E100
T495D227(1)010A(2)E125
T495V227(1)010A(2)E150
T495V227(1)010A(2)E200
T495X227(1)010A(2)E045
T495X227(1)010A(2)E050
T495X227(1)010A(2)E060
T495X227(1)010A(2)E070
T495X227(1)010A(2)E080
6.8
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
VDC at 85ºC
µF
KEMET/EIA
(See below for
part options)
µA +20ºC
Max/5 Min
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
mΩ at 20°C
mA at +25°C
100 kHz
100 kHz
Max
4.0
150
1049
12.0
350
493
30.0
500
412
30.0
700
348
8.0
100
1050
8.0
150
856
8.0
180
782
8.0
200
742
8.0
250
663
8.0
150
775
8.0
200
949
8.0
100
1118
8.0
150
913
8.0
200
791
8.0
50
1732
8.0
65
1519
8.0
80
1369
8.0
100
1225
8.0
120
1118
8.0
125
1095
6.0
100
1285
10.0
200
742
8.0
100
1118
8.0
150
913
8.0
200
791
8.0
50
1732
8.0
60
1581
8.0
80
1369
8.0
100
1225
8.0
70
1535
8.0
80
1436
8.0
85
1393
8.0
100
1285
45
1826
8.0
9.0
50
1732
8.0
75
1414
8.0
100
1225
8.0
125
1095
10.0
150
913
10.0
200
791
8.0
45
1915
8.0
50
1817
8.0
60
1658
8.0
70
1535
8.0
80
1436
mΩ at 20ºC
mA at +25ºC
% at +20ºC
100 kHz
100 kHz
120 Hz Max
Max
% at +20°C
120 Hz Max
DF
Maximum
Operating
Temp
Maximum Allowable
Ripple Current
ESR
mA at
+85°C 100
kHz
944
444
371
313
945
812
704
668
597
698
854
1006
822
712
1559
1367
1232
1103
1006
986
1157
668
1006
822
712
1559
1423
1232
1103
1382
1292
1254
1157
1643
1559
1273
1103
986
822
712
1724
1635
1492
1382
1292
mA at
+85ºC 100
kHz
mA at
+125°C 100
kHz
420
197
165
139
420
542
313
297
265
310
380
447
365
316
693
608
548
490
447
438
514
297
447
365
316
693
632
548
490
614
574
557
514
730
693
566
490
438
365
316
766
727
663
614
574
mA at
+125ºC 100
kHz
Maximum Allowable
Ripple Current
°C
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
ºC
Maximum
Operating
Temp
MSL
Reflow
Temp
≤ 260°C
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Reflow
Temp
≤ 260ºC
MSL
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2009_T495 • 5/3/2017
10
Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
Table 1 – Ratings & Part Number Reference cont'd
Rated Rated
Voltage Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA +20°C
Max/5 Min
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
220
330
330
330
330
330
330
330
330
330
330
330
330
470
470
470
470
470
470
470
470
470
1.0
1.5
2.2
2.2
3.3
3.3
4.7
4.7
4.7
4.7
4.7
6.8
6.8
10
10
10
10
10
10
15
15
15
15
X/7343-43
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
E/7360-38
E/7360-38
E/7360-38
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
E/7360-38
E/7360-38
E/7360-38
A/3216-18
A/3216-18
A/3216-18
A/3216-18
A/3216-18
B/3528-21
A/3216-18
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
C/6032-28
A/3216-18
B/3528-21
B/3528-21
B/3528-21
B/3528-21
T/3528-12
A/3216-18
B/3528-21
B/3528-21
B/3528-21
T495X227(1)010A(2)E100
T495D337(1)010A(2)E100
T495D337(1)010A(2)E125
T495D337(1)010A(2)E150
T495X337(1)010A(2)E035
T495X337(1)010A(2)E040
T495X337(1)010A(2)E050
T495X337(1)010A(2)E060
T495X337(1)010A(2)E080
T495X337(1)010A(2)E100
T495E337(1)010A(2)E040
T495E337(1)010A(2)E060
T495E337(1)010A(2)E100
T495X477(1)010A(2)E045
T495X477(1)010A(2)E050
T495X477(1)010A(2)E060
T495X477(1)010A(2)E080
T495X477(1)010A(2)E100
T495X477(1)010A(2)E200
T495E477(1)010A(2)E040
T495E477(1)010A(2)E060
T495E477(1)010A(2)E100
T495A105(1)016A(2)E5K0
T495A155(1)016A(2)E5K0
T495A225(1)016A(2)E2K5
T495A225(1)016A(2)E1K8
T495A335(1)016A(2)E3K0
T495B335(1)016A(2)E2K0
T495A475(1)016A(2)E2K0
T495B475(1)016A(2)E700
T495B475(1)016A(2)E800
T495B475(1)016A(2)E1K0
T495B475(1)016A(2)E1K5
T495B685(1)016A(2)E1K2
T495C685(1)016A(2)E750
T495A106(1)016A(2)E1K7
T495B106(1)016A(2)E500
T495B106(1)016A(2)E650
T495B106(1)016A(2)E800
T495B106(1)016A(2)E2K5
T495T106(M)016A(2)E4K0
T495A156(1)016A(2)E2K5
T495B156(1)016A(2)E500
T495B156(1)016A(2)E650
T495B156(1)016A(2)E800
22.0
33.0
33.0
33.0
33.0
33.0
33.0
33.0
33.0
33.0
33.0
33.0
33.0
47.0
47.0
47.0
47.0
47.0
47.0
47.0
47.0
47.0
0.5
0.5
0.5
0.5
0.5
0.5
0.8
0.8
0.8
0.8
0.8
1.1
1.1
1.6
1.6
1.6
1.6
1.6
1.6
2.4
2.4
2.4
2.4
VDC at 85ºC
µF
KEMET/EIA
(See below for
part options)
µA +20ºC
Max/5 Min
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
mΩ at 20°C
mA at +25°C
100 kHz
100 kHz
Max
8.0
100
1285
8.0
100
1225
10.0
125
1095
10.0
150
1000
10.0
35
2171
10.0
40
2031
10.0
50
1817
10.0
60
1658
10.0
80
1436
10.0
100
1285
8.0
40
2236
10.0
60
1826
10.0
100
1414
10.0
45
1915
10.0
50
1817
10.0
60
1658
10.0
80
1436
10.0
100
1285
10.0
200
908
10.0
40
2236
10.0
60
1826
10.0
100
1414
6.0
5000
122
6.0
5000
122
6.0
2500
173
6.0
1800
204
6.0
3000
158
6.0
2000
206
6.0
2000
194
6.0
700
348
6.0
800
326
6.0
1000
292
6.0
1500
238
1200
266
6.0
6.0
750
383
6.0
1700
210
6.0
500
412
6.0
650
362
6.0
800
326
6.0
2500
184
8.0
4000
132
8.0
2500
173
6.0
500
412
6.0
650
362
6.0
800
326
mΩ at 20ºC
mA at +25ºC
% at +20ºC
100 kHz
100 kHz
120 Hz Max
Max
% at +20°C
120 Hz Max
DF
Maximum
Operating
Temp
Maximum Allowable
Ripple Current
ESR
mA at
+85°C 100
kHz
1157
1103
986
900
1954
1828
1635
1492
1292
1157
2012
1643
1273
1724
1635
1492
1292
1157
817
2012
1643
1273
110
110
156
184
142
185
175
313
293
263
214
239
345
189
371
326
293
166
119
156
371
326
293
mA at
+85ºC 100
kHz
mA at
+125°C 100
kHz
514
490
438
400
868
812
727
663
574
514
894
730
566
766
727
663
574
514
363
894
730
566
49
49
69
82
63
82
78
139
130
117
95
106
153
84
165
145
130
74
53
69
165
145
130
mA at
+125ºC 100
kHz
Maximum Allowable
Ripple Current
°C
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
ºC
Maximum
Operating
Temp
MSL
Reflow
Temp
≤ 260°C
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Reflow
Temp
≤ 260ºC
MSL
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2009_T495 • 5/3/2017
11
Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
Table 1 – Ratings & Part Number Reference cont'd
Rated Rated
Voltage Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA +20°C
Max/5 Min
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
15
22
22
22
22
22
22
33
33
33
33
33
33
33
33
33
33
33
33
33
47
47
47
47
47
47
47
68
68
68
68
68
68
68
68
68
68
100
100
100
100
100
100
100
100
C/6032-28
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
U/6032-15
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
U/6032-15
U/6032-15
B/3528-21
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
C/6032-28
C/6032-28
C/6032-28
V/7343-20
V/7343-20
V/7343-20
D/7343-31
D/7343-31
D/7343-31
X/7343-43
C/6032-28
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
V/7343-20
T495C156(1)016A(2)E400
T495B226(1)016A(2)E600
T495B226(1)016A(2)E700
T495C226(1)016A(2)E300
T495C226(1)016A(2)E350
T495C226(1)016A(2)E500
T495U226(1)016A(2)E500
T495C336(1)016A(2)E200
T495C336(1)016A(2)E225
T495C336(1)016A(2)E230
T495C336(1)016A(2)E275
T495C336(1)016A(2)E300
T495U336(1)016A(2)E200
T495U336(1)016A(2)E400
T495B336(1)016A(2)E350
T495D336(1)016A(2)E150
T495D336(1)016A(2)E175
T495D336(1)016A(2)E200
T495D336(1)016A(2)E225
T495D336(1)016A(2)E250
T495C476(1)016A(2)E300
T495C476(1)016A(2)E350
T495D476(1)016A(2)E080
T495D476(1)016A(2)E100
T495D476(1)016A(2)E150
T495D476(1)016A(2)E180
T495D476(1)016A(2)E800
T495C686(1)016A(2)E250
T495C686(1)016A(2)E200
T495C686(1)016A(2)E180
T495V686(1)016A(2)E180
T495V686(1)016A(2)E250
T495V686(1)016A(2)E300
T495D686(1)016A(2)E070
T495D686(1)016A(2)E100
T495D686(1)016A(2)E150
T495X686(1)016A(2)E150
T495C107(1)016A(2)E200
T495D107(1)016A(2)E060
T495D107(1)016A(2)E100
T495D107(1)016A(2)E125
T495D107(1)016A(2)E130
T495D107(1)016A(2)E150
T495D107(1)016A(2)E800
T495V107(1)016A(2)E250
2.4
3.5
3.5
3.5
3.5
3.5
3.5
5.3
5.3
5.3
5.3
5.3
5.3
5.3
5.3
5.3
5.3
5.3
5.3
5.3
7.5
7.5
7.5
7.5
7.5
7.5
7.5
10.9
10.9
10.9
10.9
10.9
10.9
10.9
10.9
10.9
10.9
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
VDC at 85ºC
µF
KEMET/EIA
(See below for
part options)
µA +20ºC
Max/5 Min
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
mΩ at 20°C
mA at +25°C
100 kHz
100 kHz
Max
6.0
400
524
6.0
600
376
6.0
700
348
6.0
300
606
6.0
350
561
6.0
500
469
6.0
500
424
6.0
200
742
6.0
225
699
6.0
230
692
6.0
275
632
6.0
300
606
6.0
200
671
6.0
400
474
6.0
350
493
6.0
150
1000
6.0
175
926
6.0
200
866
4.0
225
816
6.0
250
775
6.0
300
606
6.0
350
561
6.0
80
1369
6.0
100
1225
6.0
150
1000
6.0
180
913
6.0
800
433
6.0
250
663
6.0
200
742
6.0
180
782
6.0
180
833
6.0
250
707
6.0
300
645
70
1464
6.0
6.0
100
1225
6.0
150
1000
5.0
150
1049
10.0
200
742
8.0
60
1581
8.0
100
1225
8.0
125
1095
8.0
130
1074
8.0
150
1000
8.0
800
433
8.0
250
707
mΩ at 20ºC
mA at +25ºC
% at +20ºC
100 kHz
100 kHz
120 Hz Max
Max
% at +20°C
120 Hz Max
DF
Maximum
Operating
Temp
Maximum Allowable
Ripple Current
ESR
mA at
+85°C 100
kHz
472
338
313
545
505
422
382
668
629
623
569
545
604
427
444
900
833
779
734
698
545
505
1232
1103
900
822
390
597
668
704
750
636
581
1318
1103
900
944
668
1423
1103
986
967
900
390
636
mA at
+85ºC 100
kHz
mA at
+125°C 100
kHz
210
150
139
242
224
188
170
297
280
277
253
242
268
190
197
400
370
346
326
310
242
224
548
490
400
365
173
265
297
313
333
283
258
586
490
400
420
297
632
490
438
430
400
173
283
mA at
+125ºC 100
kHz
Maximum Allowable
Ripple Current
°C
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
ºC
Maximum
Operating
Temp
MSL
Reflow
Temp
≤ 260°C
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Reflow
Temp
≤ 260ºC
MSL
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2009_T495 • 5/3/2017
12
Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
Table 1 – Ratings & Part Number Reference cont'd
Rated Rated
Voltage Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA +20°C
Max/5 Min
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
100
100
150
150
150
150
150
150
150
150
150
220
220
220
220
220
220
220
220
1
1
2.2
4.7
4.7
4.7
4.7
6.8
10
10
10
10
10
10
10
15
15
15
15
22
22
22
22
33
33
33
X/7343-43
X/7343-43
B/3528-21
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
D/7343-31
D/7343-31
D/7343-31
X/7343-43
E/7360-38
E/7360-38
E/7360-38
E/7360-38
A/3216-18
A/3216-18
A/3216-18
A/3216-18
A/3216-18
B/3528-21
B/3528-21
C/6032-28
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
V/7343-20
C/6032-28
D/7343-31
D/7343-31
T495X107(1)016A(2)E080
T495X107(1)016A(2)E100
T495B157(1)016A(2)E800
T495D157(M)016A(2)E060
T495D157(1)016A(2)E085
T495D157(1)016A(2)E100
T495D157(1)016A(2)E125
T495D157(1)016A(2)E130
T495D157(1)016A(2)E150
T495X157(1)016A(2)E075
T495X157(1)016A(2)E100
T495D227(1)016A(2)E150
T495D227(1)016A(2)E200
T495D227(1)016A(2)E220
T495X227(1)016A(2)E100
T495E227(1)016A(2)E050
T495E227(1)016A(2)E075
T495E227(1)016A(2)E100
T495E227(1)016A(2)E150
T495A105(1)020A(2)E3K0
T495A105(1)020A(2)E5K0
T495A225(1)020A(2)E3K0
T495A475(1)020A(2)E1K8
T495A475(1)020A(2)E2K0
T495B475(1)020A(2)E750
T495B475(1)020A(2)E1K0
T495C685(1)020A(2)E480
T495B106(1)020A(2)E1K0
T495B106(1)020A(2)E800
T495C106(1)020A(2)E300
T495C106(1)020A(2)E350
T495C106(1)020A(2)E400
T495C106(1)020A(2)E450
T495C106(1)020A(2)E475
T495C156(1)020A(2)E375
T495C156(1)020A(2)E400
T495D156(1)020A(2)E275
T495D156(1)020A(2)E1K2
T495D226(1)020A(2)E180
T495D226(1)020A(2)E200
T495D226(1)020A(2)E225
T495V226(1)020A(2)E400
T495C336(1)020A(2)E200
T495D336(1)020A(2)E100
T495D336(1)020A(2)E150
16.0
16.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
35.2
35.2
35.2
35.2
35.2
35.2
35.2
35.2
0.5
0.5
0.5
0.9
0.9
0.9
0.9
1.4
2.0
2.0
2.0
2.0
2.0
2.0
2.0
3.0
3.0
3.0
3.0
4.4
4.4
4.4
4.4
6.6
6.6
6.6
VDC at 85ºC
µF
KEMET/EIA
(See below for
part options)
µA +20ºC
Max/5 Min
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
mΩ at 20°C
mA at +25°C
100 kHz
100 kHz
Max
8.0
80
1436
8.0
100
1285
6.0
800
326
12.0
60
1581
8.0
85
1328
8.0
100
1225
8.0
125
1095
8.0
130
1074
8.0
150
1000
8.0
75
1483
8.0
100
1285
12.0
150
1000
12.0
200
866
12.0
220
826
8.0
100
1285
12.0
50
2000
8.0
75
1633
7.2
100
1414
7.2
150
1155
4.0
3000
158
4.0
5000
122
6.0
3000
158
6.0
1800
204
6.0
2000
194
6.0
750
337
6.0
1000
292
6.0
480
479
6.0
1000
292
6.0
800
326
6.0
300
606
6.0
350
561
6.0
400
524
6.0
450
494
475
481
6.0
6.0
375
542
6.0
400
524
4.0
275
739
4.0
1200
354
4.0
180
913
4.0
200
866
4.0
225
816
6.0
400
559
6.0
200
742
6.0
100
1225
6.0
150
1000
mΩ at 20ºC
mA at +25ºC
% at +20ºC
100 kHz
100 kHz
120 Hz Max
Max
% at +20°C
120 Hz Max
DF
Maximum
Operating
Temp
Maximum Allowable
Ripple Current
ESR
mA at
+85°C 100
kHz
1292
1157
293
1423
1195
1103
986
967
900
1335
1157
900
779
743
1157
1800
1470
1273
1040
142
110
142
184
175
303
263
431
263
293
545
505
472
445
433
488
472
665
319
822
779
734
503
668
1103
900
mA at
+85ºC 100
kHz
mA at
+125°C 100
kHz
574
514
130
632
531
490
438
430
400
593
514
400
346
330
514
800
653
566
462
63
49
63
82
78
135
117
192
117
130
242
224
210
198
192
217
210
296
142
365
346
326
224
297
490
400
mA at
+125ºC 100
kHz
Maximum Allowable
Ripple Current
°C
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
ºC
Maximum
Operating
Temp
MSL
Reflow
Temp
≤ 260°C
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Reflow
Temp
≤ 260ºC
MSL
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2009_T495 • 5/3/2017
13
Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
Table 1 – Ratings & Part Number Reference cont'd
Rated Rated
Voltage Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA +20°C
Max/5 Min
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
25
25
25
25
25
25
25
25
25
25
25
25
25
33
33
47
47
47
47
47
47
47
47
47
47
47
47
68
68
68
68
68
68
68
68
68
68
100
100
100
100
100
100
100
150
0.47
0.47
1
1
1
1
1.5
2.2
2.2
3.3
3.3
4.7
4.7
D/7343-31
X/7343-43
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
C/6032-28
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
D/7343-31
X/7343-43
X/7343-43
E/7360-38
E/7360-38
E/7360-38
E/7360-38
E/7360-38
A/3216-18
A/3216-18
A/3216-18
A/3216-18
A/3216-18
A/3216-18
A/3216-18
B/3528-21
C/6032-28
B/3528-21
C/6032-28
C/6032-28
C/6032-28
T495D336(1)020A(2)E200
T495X336(1)020A(2)E200
T495D476(1)020A(2)E075
T495D476(1)020A(2)E100
T495D476(1)020A(2)E150
T495D476(1)020A(2)E175
T495D476(1)020A(2)E200
T495D476(1)020A(2)E250
T495X476(1)020A(2)E065
T495X476(1)020A(2)E070
T495X476(1)020A(2)E100
T495X476(1)020A(2)E125
T495X476(1)020A(2)E130
T495X476(1)020A(2)E150
T495C686(1)020A(2)E250
T495D686(1)020A(2)E070
T495D686(1)020A(2)E100
T495D686(1)020A(2)E150
T495D686(1)020A(2)E200
T495D686(1)020A(2)E300
T495X686(1)020A(2)E120
T495X686(1)020A(2)E130
T495X686(1)020A(2)E150
T495X686(1)020A(2)E200
T495D107(1)020A(2)E200
T495X107(1)020A(2)E100
T495X107(1)020A(2)E150
T495E107(1)020A(2)E060
T495E107(1)020A(2)E085
T495E107(1)020A(2)E100
T495E107(1)020A(2)E200
T495E157(1)020A(2)E080
T495A474(1)025A(2)E4K5
T495A474(1)025A(2)E7K0
T495A105(1)025A(2)E2K5
T495A105(1)025A(2)E3K0
T495A105(1)025A(2)E4K0
T495A105(1)025A(2)E5K0
T495A155(1)025A(2)E3K0
T495B225(1)025A(2)E1K2
T495C225(1)025A(2)E1K3
T495B335(1)025A(2)E1K2
T495C335(1)025A(2)E750
T495C475(1)025A(2)E530
T495C475(1)025A(2)E575
6.6
6.6
9.4
9.4
9.4
9.4
9.4
9.4
9.4
9.4
9.4
9.4
9.4
9.4
13.6
13.6
13.6
13.6
13.6
13.6
13.6
13.6
13.6
13.6
20.0
20.0
20.0
20.0
20.0
20.0
20.0
30.0
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.6
0.8
0.8
1.2
1.2
VDC at 85ºC
µF
KEMET/EIA
(See below for
part options)
µA +20ºC
Max/5 Min
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
mΩ at 20°C
mA at +25°C
100 kHz
100 kHz
Max
6.0
200
866
6.0
200
908
6.0
75
1414
6.0
100
1225
6.0
150
1000
6.0
175
926
6.0
200
866
6.0
250
775
8.0
65
1593
6.0
70
1535
6.0
100
1285
6.0
125
1149
6.0
130
1127
4.0
150
1049
8.0
250
663
6.0
70
1464
6.0
100
1225
6.0
150
1000
6.0
200
866
6.0
300
707
6.0
120
1173
6.0
130
1127
6.0
150
1049
6.0
200
908
6.0
200
866
6.0
100
1285
8.0
150
1049
8.0
60
1826
8.0
85
1534
8.0
100
1414
8.0
200
1000
8.0
80
1581
4.0
4500
129
7000
104
4.0
4.0
2500
173
4.0
3000
158
4.0
4000
137
4.0
5000
122
6.0
3000
158
4.0
1200
266
6.0
1300
291
6.0
1200
266
6.0
750
383
6.0
530
456
6.0
575
437
mΩ at 20ºC
mA at +25ºC
% at +20ºC
100 kHz
100 kHz
120 Hz Max
Max
% at +20°C
120 Hz Max
DF
Maximum
Operating
Temp
Maximum Allowable
Ripple Current
ESR
mA at
+85°C 100
kHz
779
817
1273
1103
900
833
779
698
1434
1382
1157
1034
1014
944
597
1318
1103
900
779
636
1056
1014
944
817
779
1157
944
1643
1381
1273
900
1423
116
94
156
142
123
110
142
239
262
239
345
410
393
mA at
+85ºC 100
kHz
mA at
+125°C 100
kHz
346
363
566
490
400
370
346
310
637
614
514
460
451
420
265
586
490
400
346
283
469
451
420
363
346
514
420
730
614
566
400
632
52
42
69
63
55
49
63
106
116
106
153
182
175
mA at
+125ºC 100
kHz
Maximum Allowable
Ripple Current
°C
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
ºC
Maximum
Operating
Temp
MSL
Reflow
Temp
≤ 260°C
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Reflow
Temp
≤ 260ºC
MSL
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2009_T495 • 5/3/2017
14
Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
Table 1 – Ratings & Part Number Reference cont'd
Rated Rated
Voltage Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA +20°C
Max/5 Min
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
4.7
4.7
4.7
4.7
4.7
6.8
6.8
6.8
6.8
6.8
10
10
10
10
10
15
15
15
15
15
15
22
22
22
22
22
22
22
33
33
33
33
33
33
33
33
33
33
33
47
47
47
47
47
47
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
B/3528-21
C/6032-28
C/6032-28
C/6032-28
D/7343-31
C/6032-28
D/7343-31
D/7343-31
D/7343-31
V/7343-20
X/7343-43
C/6032-28
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
X/7343-43
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
T495B475(1)025A(2)E700
T495B475(1)025A(2)E750
T495B475(1)025A(2)E800
T495B475(1)025A(2)E900
T495B475(1)025A(2)E1K0
T495B685(1)025A(2)E1K0
T495B685(1)025A(2)E1K5
T495C685(1)025A(2)E400
T495C685(1)025A(2)E490
T495C685(1)025A(2)E500
T495B106(1)025A(2)E750
T495C106(1)025A(2)E275
T495C106(1)025A(2)E300
T495C106(1)025A(2)E450
T495D106(1)025A(2)E1K2
T495C156(1)025A(2)E300
T495D156(1)025A(2)E100
T495D156(1)025A(2)E230
T495D156(1)025A(2)E275
T495V156(1)025A(2)E500
T495X156(1)025A(2)E200
T495C226(1)025A(2)E275
T495C226(1)025A(2)E280
T495C226(1)025A(2)E300
T495C226(1)025A(2)E900
T495D226(1)025A(2)E200
T495D226(1)025A(2)E230
T495X226(1)025A(2)E225
T495D336(1)025A(2)E090
T495D336(1)025A(2)E100
T495D336(1)025A(2)E150
T495D336(1)025A(2)E200
T495D336(1)025A(2)E225
T495D336(1)025A(2)E230
T495D336(1)025A(2)E300
T495X336(1)025A(2)E100
T495X336(1)025A(2)E175
T495X336(1)025A(2)E180
T495X336(1)025A(2)E200
T495X476(1)025A(2)E080
T495X476(1)025A(2)E100
T495X476(1)025A(2)E120
T495X476(1)025A(2)E150
T495X476(1)025A(2)E185
T495X476(1)025A(2)E200
1.2
1.2
1.2
1.2
1.2
1.7
1.7
1.7
1.7
1.7
2.5
2.5
2.5
2.5
2.5
3.8
3.8
3.8
3.8
3.8
3.8
5.5
5.5
5.5
5.5
5.5
5.5
5.5
8.3
8.3
8.3
8.3
8.3
8.3
8.3
8.3
8.3
8.3
8.3
11.8
11.8
11.8
11.8
11.8
11.8
VDC at 85ºC
µF
KEMET/EIA
(See below for
part options)
µA +20ºC
Max/5 Min
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
mΩ at 20°C
mA at +25°C
100 kHz
100 kHz
Max
6.0
700
348
6.0
750
337
6.0
800
326
6.0
900
307
6.0
1000
292
6.0
1000
292
6.0
1500
238
6.0
400
524
6.0
490
474
6.0
500
469
6.0
750
337
6.0
275
632
6.0
300
606
6.0
450
494
6.0
1200
354
6.0
300
606
6.0
100
1225
4.0
230
808
6.0
275
739
6.0
500
500
4.0
200
908
6.0
275
632
6.0
280
627
8.0
300
606
6.0
900
350
6.0
200
866
6.0
230
808
4.0
225
856
6.0
90
1291
6.0
100
1225
6.0
150
1000
6.0
200
866
6.0
225
816
230
808
6.0
6.0
300
707
4.0
100
1285
4.0
175
971
4.0
180
957
4.0
200
908
6.0
80
1436
6.0
100
1285
6.0
120
1173
6.0
150
1049
6.0
185
944
6.0
200
908
mΩ at 20ºC
mA at +25ºC
% at +20ºC
100 kHz
100 kHz
120 Hz Max
Max
% at +20°C
120 Hz Max
DF
Maximum
Operating
Temp
Maximum Allowable
Ripple Current
ESR
mA at
+85°C 100
kHz
313
303
293
276
263
263
214
472
427
422
303
569
545
445
319
545
1103
727
665
450
817
569
564
545
315
779
727
770
1162
1103
900
779
734
727
636
1157
874
861
817
1292
1157
1056
944
850
817
mA at
+85ºC 100
kHz
mA at
+125°C 100
kHz
139
135
130
123
117
117
95
210
190
188
135
253
242
198
142
242
490
323
296
200
363
253
251
242
140
346
323
342
516
490
400
346
326
323
283
514
388
383
363
574
514
469
420
378
363
mA at
+125ºC 100
kHz
Maximum Allowable
Ripple Current
°C
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
ºC
Maximum
Operating
Temp
MSL
Reflow
Temp
≤ 260°C
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Reflow
Temp
≤ 260ºC
MSL
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2009_T495 • 5/3/2017
15
Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
Table 1 – Ratings & Part Number Reference cont'd
Rated Rated
Voltage Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
% at +20°C
120 Hz Max
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA +20°C
Max/5 Min
25
25
25
25
25
25
25
25
25
25
25
25
25
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
47
47
47
47
47
68
68
68
68
68
68
100
100
0.33
0.47
0.47
0.47
0.47
0.47
1
1
1
1
1
2.2
2.2
2.2
2.2
3.3
3.3
3.3
3.3
3.3
4.7
4.7
4.7
4.7
4.7
4.7
6.8
6.8
6.8
6.8
6.8
6.8
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
E/7360-38
A/3216-18
A/3216-18
B/3528-21
B/3528-21
B/3528-21
B/3528-21
A/3216-18
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
C/6032-28
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
D/7343-31
C/6032-28
D/7343-31
D/7343-31
D/7343-31
V/7343-20
X/7343-43
T495D476(1)025A(2)E100
T495D476(1)025A(2)E120
T495D476(1)025A(2)E130
T495D476(1)025A(2)E150
T495D476(1)025A(2)E250
T495D686(1)025A(2)E150
T495D686(1)025A(2)E200
T495X686(1)025A(2)E125
T495X686(1)025A(2)E130
T495X686(1)025A(2)E150
T495X686(1)025A(2)E200
T495X107(1)025A(2)E150
T495E107(1)025A(2)E100
T495A334(1)035A(2)E6K0
T495A474(1)035A(2)E4K0
T495B474(1)035A(2)E1K5
T495B474(1)035A(2)E2K2
T495B474(1)035A(2)E2K5
T495B474(1)035A(2)E11K
T495A105(1)035A(2)E3K0
T495B105(1)035A(2)E1K5
T495B105(1)035A(2)E1K7
T495B105(1)035A(2)E2K0
T495B105(1)035A(2)E7K0
T495B225(1)035A(2)E1K5
T495B225(1)035A(2)E2K0
T495B225(1)035A(2)E4K0
T495C225(1)035A(2)E750
T495B335(1)035A(2)E1K0
T495B335(1)035A(2)E900
T495C335(1)035A(2)E525
T495C335(1)035A(2)E550
T495C335(1)035A(2)E600
T495B475(1)035A(2)E850
T495B475(1)035A(2)E1K0
T495C475(1)035A(2)E450
T495C475(1)035A(2)E500
T495C475(1)035A(2)E600
T495D475(1)035A(2)E300
T495C685(1)035A(2)E1K8
T495D685(1)035A(2)E150
T495D685(1)035A(2)E300
T495D685(1)035A(2)E400
T495V685(1)035A(2)E600
T495X685(1)035A(2)E300
11.8
11.8
11.8
11.8
11.8
17.0
17.0
17.0
17.0
17.0
17.0
25.0
25.0
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.8
0.8
0.8
0.8
1.2
1.2
1.2
1.2
1.2
1.6
1.6
1.6
1.6
1.6
1.6
2.4
2.4
2.4
2.4
2.4
2.4
VDC at 85ºC
µF
KEMET/EIA
(See below for
part options)
µA +20ºC
Max/5 Min
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
ESR
mΩ at 20°C
mA at +25°C
100 kHz
100 kHz
Max
6.0
100
1225
6.0
120
1118
6.0
130
1074
6.0
150
1000
6.0
250
775
10.0
150
1000
10.0
200
866
6.0
125
1149
6.0
130
1127
6.0
150
1049
6.0
200
908
10.0
150
1049
8.0
100
1414
4.0
6000
112
4.0
4000
137
4.0
1500
238
4.0
2200
197
4.0
2500
184
4.0
11000
88
4.0
3000
158
4.0
1500
238
4.0
1700
224
4.0
2000
206
4.0
7000
110
6.0
1500
238
6.0
2000
206
6.0
4000
146
6.0
750
383
6.0
1000
292
6.0
900
307
6.0
525
458
6.0
550
447
6.0
600
428
850
316
6.0
6.0
1000
292
6.0
450
494
6.0
500
469
6.0
600
428
6.0
300
707
6.0
1800
247
6.0
150
1000
6.0
300
707
6.0
400
612
6.0
600
456
4.0
300
742
mΩ at 20ºC
mA at +25ºC
% at +20ºC
100 kHz
100 kHz
120 Hz Max
Max
DF
Maximum
Operating
Temp
Maximum Allowable
Ripple Current
ESR
mA at
+85°C 100
kHz
1103
1006
967
900
698
900
779
1034
1014
944
817
944
1273
101
123
214
177
166
79
142
214
202
185
99
214
185
131
345
263
276
412
402
385
284
263
445
422
385
636
222
900
636
551
410
668
mA at
+85ºC 100
kHz
mA at
+125°C 100
kHz
490
447
430
400
310
400
346
460
451
420
363
420
566
45
55
95
79
74
35
63
95
90
82
44
95
82
58
153
117
123
183
179
171
126
117
198
188
171
283
99
400
283
245
182
297
mA at
+125ºC 100
kHz
Maximum Allowable
Ripple Current
°C
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
ºC
Maximum
Operating
Temp
MSL
Reflow
Temp
≤ 260°C
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Reflow
Temp
≤ 260ºC
MSL
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2009_T495 • 5/3/2017
16
Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
Table 1 – Ratings & Part Number Reference cont'd
Rated Rated
Voltage Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA +20°C
Max/5 Min
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
50
10
10
10
10
10
10
10
10
10
10
10
10
10
15
15
15
15
15
15
15
15
22
22
22
22
22
22
22
22
22
22
22
22
33
33
33
33
33
33
33
47
47
47
47
1
C/6032-28
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
V/7343-20
X/7343-43
X/7343-43
X/7343-43
X/7343-43
C/6032-28
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
E/7360-38
X/7343-43
X/7343-43
X/7343-43
X/7343-43
C/6032-28
T495C106(1)035A(2)E400
T495D106(1)035A(2)E120
T495D106(1)035A(2)E125
T495D106(1)035A(2)E130
T495D106(1)035A(2)E250
T495D106(1)035A(2)E260
T495D106(1)035A(2)E300
T495D106(1)035A(2)E1K0
T495V106(1)035A(2)E600
T495X106(1)035A(2)E175
T495X106(1)035A(2)E200
T495X106(1)035A(2)E250
T495X106(1)035A(2)E260
T495C156(1)035A(2)E350
T495D156(1)035A(2)E225
T495D156(1)035A(2)E260
T495D156(1)035A(2)E300
T495X156(1)035A(2)E200
T495X156(1)035A(2)E225
T495X156(1)035A(2)E250
T495X156(1)035A(2)E260
T495D226(1)035A(2)E125
T495D226(1)035A(2)E200
T495D226(1)035A(2)E250
T495D226(1)035A(2)E260
T495D226(1)035A(2)E300
T495X226(1)035A(2)E125
T495X226(1)035A(2)E130
T495X226(1)035A(2)E180
T495X226(1)035A(2)E200
T495X226(1)035A(2)E260
T495X226(1)035A(2)E275
T495X226(1)035A(2)E300
T495D336(1)035A(2)E200
T495D336(1)035A(2)E300
T495X336(1)035A(2)E100
T495X336(1)035A(2)E175
T495X336(1)035A(2)E250
T495X336(1)035A(2)E260
T495E336(1)035A(2)E200
T495X476(1)035A(2)E185
T495X476(1)035A(2)E200
T495X476(1)035A(2)E230
T495X476(1)035A(2)E300
T495C105(1)050A(2)E1K3
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
5.3
5.3
5.3
5.3
5.3
5.3
5.3
5.3
7.7
7.7
7.7
7.7
7.7
7.7
7.7
7.7
7.7
7.7
7.7
7.7
11.6
11.6
11.6
11.6
11.6
11.6
11.6
16.5
16.5
16.5
16.5
0.5
VDC at 85ºC
µF
KEMET/EIA
(See below for
part options)
µA +20ºC
Max/5 Min
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
mΩ at 20°C
mA at +25°C
100 kHz
100 kHz
Max
6.0
400
524
4.0
120
1118
6.0
125
1095
6.0
130
1074
6.0
250
775
6.0
260
760
6.0
300
707
6.0
1000
387
6.0
600
456
6.0
175
971
6.0
200
908
4.0
250
812
4.0
260
797
6.0
350
561
6.0
225
816
6.0
260
760
6.0
300
707
6.0
200
908
6.0
225
856
6.0
250
812
6.0
260
797
6.0
125
1095
6.0
200
866
6.0
250
775
6.0
260
760
6.0
300
707
6.0
125
1149
6.0
130
1127
6.0
180
957
6.0
200
908
6.0
260
797
6.0
275
775
6.0
300
742
200
866
6.0
6.0
300
707
6.0
100
1285
6.0
175
971
6.0
250
812
6.0
260
797
6.0
200
1000
8.0
185
944
8.0
200
908
8.0
230
847
8.0
300
742
4.0
1300
291
mΩ at 20ºC
mA at +25ºC
% at +20ºC
100 kHz
100 kHz
120 Hz Max
Max
% at +20°C
120 Hz Max
DF
Maximum
Operating
Temp
Maximum Allowable
Ripple Current
ESR
mA at
+85°C 100
kHz
472
1006
986
967
698
684
636
348
410
874
817
731
717
505
734
684
636
817
770
731
717
986
779
698
684
636
1034
1014
861
817
717
698
668
779
636
1157
874
731
717
900
850
817
762
668
262
mA at
+85ºC 100
kHz
mA at
+125°C 100
kHz
210
447
438
430
310
304
283
155
182
388
363
325
319
224
326
304
283
363
342
325
319
438
346
310
304
283
460
451
383
363
319
310
297
346
283
514
388
325
319
400
378
363
339
297
116
mA at
+125ºC 100
kHz
Maximum Allowable
Ripple Current
°C
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
ºC
Maximum
Operating
Temp
MSL
Reflow
Temp
≤ 260°C
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Reflow
Temp
≤ 260ºC
MSL
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2009_T495 • 5/3/2017
17
Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
Table 1 – Ratings & Part Number Reference cont'd
Rated Rated
Voltage Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA +20°C
Max/5 Min
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
1
2.2
3.3
4.7
4.7
4.7
6.8
6.8
6.8
6.8
6.8
6.8
10
10
10
15
15
15
C/6032-28
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
T495C105(1)050A(2)E1K6
T495D225(1)050A(2)E600
T495D335(1)050A(2)E700
T495D475(1)050A(2)E275
T495D475(1)050A(2)E300
T495X475(1)050A(2)E300
T495D685(1)050A(2)E190
T495D685(1)050A(2)E200
T495D685(1)050A(2)E275
T495D685(1)050A(2)E300
T495D685(1)050A(2)E400
T495X685(1)050A(2)E300
T495X106(1)050A(2)E250
T495X106(1)050A(2)E260
T495X106(1)050A(2)E300
T495X156(1)050A(2)E200
T495X156(1)050A(2)E250
T495X156(1)050A(2)E300
0.5
1.1
1.7
2.4
2.4
2.4
3.4
3.4
3.4
3.4
3.4
3.4
5.0
5.0
5.0
7.5
7.5
7.5
VDC at 85ºC
µF
KEMET/EIA
(See below for
part options)
µA +20ºC
Max/5 Min
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
mΩ at 20°C
mA at +25°C
100 kHz
100 kHz
Max
4.0
1600
262
6.0
600
500
6.0
700
463
6.0
275
739
6.0
300
707
4.0
300
742
6.0
190
889
6.0
200
866
6.0
275
739
6.0
300
707
6.0
400
612
6.0
300
742
8.0
250
812
6.0
260
797
6.0
300
742
6.0
200
908
6.0
250
812
6.0
300
742
mΩ at 20ºC
mA at +25ºC
% at +20ºC
100 kHz
100 kHz
120 Hz Max
Max
% at +20°C
120 Hz Max
DF
Maximum
Operating
Temp
Maximum Allowable
Ripple Current
ESR
mA at
+85°C 100
kHz
236
450
417
665
636
668
800
779
665
636
551
668
731
717
668
817
731
668
mA at
+85ºC 100
kHz
mA at
+125°C 100
kHz
105
200
185
296
283
297
356
346
296
283
245
297
325
319
297
363
325
297
mA at
+125ºC 100
kHz
Maximum Allowable
Ripple Current
°C
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
ºC
Maximum
Operating
Temp
MSL
Reflow
Temp
≤ 260°C
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Reflow
Temp
≤ 260ºC
MSL
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =
Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2009_T495 • 5/3/2017
18
Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
Recommended Voltage Derating Guidelines
85°C to 125°C
120%
VR
67% of VR
100%
50% of VR
33% of VR
% Working Voltage
% Change in Working
DC Voltage with
Temperature
Recommended
Maximum Application
Voltage
−55°C to 85°C
80%
% Change in Working DC Voltage
with Temperature
67%
60%
40%
20%
0%
−55
Recommended Maximum
Application Voltage
(As % of Rated Voltage)
25
33%
85
Temperature (ºC)
125
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to
equivalent series resistance (ESR) and the power dissipation
capabilities of the device. Permissible AC ripple voltage
which may be applied is limited by two criteria:
1. The positive peak AC voltage plus the DC bias voltage,
if any, must not exceed the DC voltage rating of the
capacitor.
2. The negative peak AC voltage in combination with
bias voltage, if any, must not exceed the allowable limits
specified for reverse voltage. See the Reverse Voltage
section for allowable limits.
The maximum power dissipation by case size can be
determined using the table at right. The maximum power
dissipation rating stated in the table must be reduced with
increasing environmental operating temperatures. Refer to
the table below for temperature compensation requirements.
Temperature Compensation Multipliers
for Maximum Ripple Current
T ≤ 25°C
1.00
T ≤ 85°C
0.90
T ≤ 125°C
0.40
T= Environmental Temperature
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature
Compensation Multiplier table for details.
KEMET
Case Code
EIA
Case Code
Maximum Power
Dissipation (P max)
mWatts at 25°C
w/+20°C Rise
A
B
C
D
X
E
S
T
U
V
T510X
T510E
3216–18
3528–21
6032–28
7343–31
7343–43
7360–38
3216–12
3528–12
6032–15
7343–20
7343–43
7360–38
75
85
110
150
165
200
60
70
90
125
270
285
Using the P max of the device, the maximum allowable rms
ripple current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
R = ESR at specified frequency (ohms)
Z = Impedance at specified frequency (ohms)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2009_T495 • 5/3/2017
19
Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
Reverse Voltage
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong
polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small
degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated
continuously in reverse mode, even within these limits.
Temperature
Permissible Transient Reverse Voltage
25°C
85°C
125°C
15% of Rated Voltage
5% of Rated Voltage
1% of Rated Voltage
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Case
EIA
W
L
S
V1
V2
W
L
S
V1
V2
W
L
S
V1
V2
A
3216–18
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
B
3528–21
2.35
2.21
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
M
3528-15
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
C
6032–25
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
U
6032–15
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
D
7343–31
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
E1
7360–38
4.25
2.77
3.67
10.22
7.30
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
T
3528–12
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
V
7343–20
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
X
7343–43
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
1
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow
solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.
Density Level C: For high component desity product applications. Before adapting the minimum land pattern variations the user should perform
qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351).
¹ Height of these chips may create problems in wave soldering.
2
Land pattern geometry is too small for silkscreen outline.
V1
L
L
W
W
V2
S
Grid Placement Courtyard
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2009_T495 • 5/3/2017
20
Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
Soldering Process
KEMET’s families of surface mount capacitors are compatible
with wave (single or dual), convection, IR, or vapor phase
reflow techniques. Preheating of these components is
recommended to avoid extreme thermal stress. KEMET's
recommended profile conditions for convection and IR
reflow reflect the profile conditions of the IPC/J–STD–020D
standard for moisture sensitivity testing. The devices can
safely withstand a maximum of three reflow passes at these
conditions.
Please note that although the X/7343–43 case size can
withstand wave soldering, the tall profile (4.3 mm maximum)
dictates care in wave process development.
Profile Feature
SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (TSmin)
100°C
150°C
Temperature Maximum (TSmax)
150°C
200°C
Time (ts) from Tsmin to Tsmax)
60 – 120 seconds
60 – 120 seconds
Ramp-up Rate (TL to TP)
3°C/seconds maximum 3°C/seconds maximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (tL)
60 – 150 seconds
220°C*
235°C**
60 – 150 seconds
250°C*
260°C**
Peak Temperature (TP)
Time within 5°C of Maximum 20 seconds maximum 30 seconds maximum
Peak Temperature (tP)
Ramp-down Rate (TP to TL) 6°C/seconds maximum 6°C/seconds maximum
Time 25°C to Peak
6 minutes maximum
8 minutes maximum
Temperature
Note: All temperatures refer to the center of the package, measured on the
During typical reflow operations, a slight darkening of the
gold-colored epoxy may be observed. This slight darkening is
normal and not harmful to the product. Marking permanency
is not affected by this change.
Temperature
Hand soldering should be performed with care due to the
package body surface that is facing up during assembly reflow.
difficulty in process control. If performed, care should be
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
taken to avoid contact of the soldering iron to the molded
case. The iron should be used to heat the solder pad, applying
solder between the pad and the termination, until reflow
TP
tP
Maximum Ramp Up Rate = 3ºC/second
occurs. Once reflow occurs, the iron should be removed
Maximum Ramp Down Rate = 6ºC/second
TL
immediately. “Wiping” the edges of a chip and heating the top
tL
surface is not recommended.
Tsmax
Tsmin
25
ts
25ºC to Peak
Time
Storage
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in
other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres,
and long term storage. In addition, packaging materials will be degraded by high temperature–reels may soften or warp
and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum
storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on
the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability chip stock
should be used promptly, preferably within three years of receipt.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2009_T495 • 5/3/2017
21
Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
Construction
Polarity Stripe (+)
Molded Epoxy
Case
Detailed Cross Section
Silver Paint
(Fourth Layer)
Polarity
Bevel (+)
Tantalum Wire
Leadframe
(− Cathode)
Washer
Tantalum Wire
Weld
(to attach wire)
Carbon
(Third Layer)
Silver Adhesive
Leadframe
(+ Anode)
Molded Epoxy
Case
MnO2
(Second Layer)
Washer
Ta2O5 Dielectric
(First Layer)
Tantalum
Capacitor Marking
Date Code *
1st digit = Last number of Year
2 = 2012
3 = 2013
4 = 2014
5 = 2015
6 = 2016
7 = 2017
2nd and 3rd digit = Week of the
Year
01 = 1st week of the Year to
52 = 52nd week of the Year
Polarity
Indicator (+)
Picofarad
Code
KEMET
ID
Rated
Voltage
Date
Code*
* 230 = 30th week of 2012
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2009_T495 • 5/3/2017
22
Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
Tape & Reel Packaging Information
KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with
EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system
is compatible with all tape-fed automatic pick-and-place systems.
8 mm (0.315")
or
12 mm (0.472")
Top Tape Thickness
0.10 mm (0.004")
Maximum Thickness
180 mm (7.0")
or
330 mm (13.0")
Table 3 – Packaging Quantity
Case Code
KEMET
S
T
M
U
L
W
Z
V
A
B
C
D
Q
Y
X
E/T428P
H
EIA
3216-12
3528-12
3528-15
6032-15
6032-19
7343-15
7343-17
7343-20
3216-18
3528-21
6032-28
7343-31
7343-12
7343-40
7343-43
7360-38
7360-20
Tape Width
(mm)
7" Reel*
13" Reel*
8
8
8
12
12
12
12
12
8
8
12
12
12
12
12
12
12
2,500
2,500
2,000
1,000
1,000
1,000
1,000
1,000
2,000
2,000
500
500
1,000
500
500
500
1,000
10,000
10,000
8,000
5,000
3,000
3,000
3,000
3,000
9,000
8,000
3,000
2,500
3,000
2,000
2,000
2,000
2,500
* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2009_T495 • 5/3/2017
23
Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
P2
T
T2
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
Po
ØDo
E1
Ao
F
Ko
B1
E2
Bo
S1
W
P1
T1
Center Lines of Cavity
ØD
Cover Tape
B 1 is for tape feeder reference only,
including draft concentric about B
o.
Embossment
For cavity size,
see Note 1 Table 4
1
User Direction of Unreeling
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
D0
8 mm
12 mm
16 mm
1.5+0.10/−0.0
(0.059+0.004/−0.0)
D1 Minimum
Note 1
1.0
(0.039)
1.5
(0.059)
E1
P0
P2
2.0±0.05
(0.079±0.002)
1.75±0.10
4.0±0.10
(0.069±0.004) (0.157±0.004)
2.0±0.1
(0.079±0.059)
R Reference S1 Minimum
T1
T Maximum
Note 2
Note 3
Maximum
25.0
(0.984)
0.600
0.600
0.100
30
(0.024)
(0.024)
(0.004)
(1.181)
Variable Dimensions — Millimeters (Inches)
B1 Maximum
Tape Size
Pitch
Note 4
4.35
8 mm
Single (4 mm)
(0.171)
Single (4 mm)
8.2
12 mm
& Double (8
(0.323)
mm)
12.1
16 mm
Triple (12 mm)
(0.476)
E2 Minimum
F
6.25
(0.246)
3.5±0.05
(0.138±0.002)
10.25
(0.404)
14.25
(0.561)
P1
2.0±0.05 or 4.0±0.10
(0.079±0.002 or 0.157±0.004)
2.0±0.05 (0.079±0.002) or
5.5±0.05
4.0±0.10 (0.157±0.004) or
(0.217±0.002)
8.0±0.10 (0.315 ±0.004)
7.5±0.10
4.0±0.10 (0.157±0.004)
(0.295±0.004) to 12.0±0.10 (0.472±0.004)
T2 Maximum W Maximum A0, B0 & K0
2.5
(0.098)
8.3
(0.327)
4.6
(0.181)
12.3
(0.484)
8.0 (0.315)
16.3
(0.642)
Note 5
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment
location and hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 4).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see
Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2009_T495 • 5/3/2017
24
Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
Peel Strength
8 mm
0.1 to 1.0 Newton (10 to 100 gf)
12 and 16 mm
0.1 to 1.3 Newton (10 to 130 gf)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be
165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of
300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
°
T
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Typical Pocket Centerline
Tape
Maximum
Width (mm) Rotation (
8,12
20
16 – 200
10
Bo
°
T)
Typical Component Centerline
Ao
Figure 3 – Maximum Lateral Movement
8 mm & 12 mm Tape
0.5 mm maximum
0.5 mm maximum
°
s
Tape
Width (mm)
8,12
16 – 56
72 – 200
Maximum
Rotation (
20
10
5
Figure 4 – Bending Radius
Embossed
Carrier
16 mm Tape
°
S)
Punched
Carrier
1.0 mm maximum
1.0 mm maximum
R
Bending
Radius
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
R
T2009_T495 • 5/3/2017
25
Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
Figure 5 – Reel Dimensions
Full Radius,
See Note
W3
(Includes
flange distortion
at outer edge)
Access Hole at
Slot Location
(Ø 40 mm minimum)
W2
D
A
(See Note)
N
C
(Arbor hole
diameter)
B
(see Note)
(Measured at hub)
W1
(Measured at hub)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
Note: Drive spokes optional; if used, dimensions B and D shall apply.
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
A
B Minimum
C
D Minimum
8 mm
178±0.20
(7.008±0.008)
or
330±0.20
(13.000±0.008)
1.5
(0.059)
13.0+0.5/−0.2
(0.521+0.02/−0.008)
20.2
(0.795)
12 mm
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size
N Minimum
W1
W2 Maximum
W3
50
(1.969)
8.4+1.5/−0.0
(0.331+0.059/−0.0)
12.4+2.0/−0.0
(0.488+0.078/−0.0)
16.4+2.0/−0.0
(0.646+0.078/−0.0)
14.4
(0.567)
18.4
(0.724)
22.4
(0.882)
Shall accommodate tape
width without interference
8 mm
12 mm
16 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2009_T495 • 5/3/2017
26
Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
Figure 6 – Tape Leader & Trailer Dimensions
Embossed Carrier
Punched Carrier
8 mm & 12 mm only
END
Carrier Tape
Round Sprocket Holes
START
Top Cover Tape
Elongated Sprocket Holes
(32 mm tape and wider)
Trailer
160 mm Minimum
Components
100 mm
Minimum Leader
400 mm Minimum
Top Cover Tape
Figure 7 – Maximum Camber
Elongated Sprocket Holes
(32 mm & wider tapes)
Carrier Tape
Round Sprocket Holes
2 mm Maximum, either direction for 8 mm wide tape
Straight Edge
250 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2009_T495 • 5/3/2017
27
Tantalum Surface Mount Capacitors – Low ESR
T495 Series Surge Robust MnO2
KEMET Electronics Corporation Sales Offices
For a complete list of our global sales offi ces, please visit www.kemet.com/sales.
Disclaimer
All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no
obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or
property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2009_T495 • 5/3/2017
28