Fused MnO2 Tantalum Surface Mount Capacitors
T496 Hi-Rel Fused COTS MnO2 Series and DLA (DSCC)
Drawing 04053
Overview
Applications
The T496 COTS (Commercial-Off-the-Shelf) Series with a builtin fuse design provides excellent protection from short circuit
conditions in applications where damaging high fault currents
exist. This series meets the MIL–PRF–55365 requirements and
is suitable for use in high reliability applications, incorporating
an intensive testing and screening protocol that is customizable
depending on specific customer requirements. The T496 COTS
Series is available in standard and low ESR.
Typical applications include decoupling and filtering in computing,
telecommunications, defense, and industrial end applications
requiring built-in fuse capability.
Benefits
• Meets or exceeds EIA standard 535BAACC
• Halogen-free epoxy
• Patented fuse assembly which protects against short circuit
mode
• DLA (DSCC) Drawing 04053 Available
• Established Reliability Weibull Options B, C, or D
• 100% surge current testing options per MIL–PRF–55365
available
• Capacitance values of 0.15 µF to 470 µF
• Voltage rating of 4 – 50 VDC
• Fuse actuation, 25˚C: within 1 second at fault currents of
4 amps and higher
• Continuous current capability: 0.75 amps
• Post actuation resistance, 25˚C: 10 MΩ, minimum
• Test tabs on side of case bypass the capacitor element to allow
direct testing of the fuse assembly
• RoHS Compliant (100% Sn) and SnPb terminations available
• Standard termination SnPb
• Operating temperature range of -55˚C to +125˚C
• MSL Level = 1
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2062_T496_COTS • 10/19/2012
1
Fused MnO2 Tantalum Surface Mount Capacitors
T496 Hi-Rel Fused COTS MnO2 Series and DLA (DSCC) Drawing 04053
SPICE
For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
Ordering Information
T
496
X
227
M
010
B
T
61
10
Capacitor
Class
Series
Case
Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
Performance
ESR
T=
Tantalum
Fail
Safe
B, C,
D, X
First two digits
represent
significant
figures. Third
digit specifies
number of
zeros.
K = ±10%
M = ±20%
004 = 4 V
006 = 6.3 V
010 = 10 V
015 = 15 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
B = 0.1%/1,000
hours
C = 0.01%/1,000
hours
D = 0.001%/
1,000 hours
Z = Non-Weibull
Graded
04053-
001
B
Drawing Number
Dash Number
Reliability Grade
See Part Number List
B = 0.1%/1,000 hours
C = 0.01%/1,000 hours
D = 0.001%/1,000 hours
Z = Non-Weibull Graded
T = 100% Matte
Tin (Sn) Plated
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
C = Hot Solder
Dipped
K = Solder
Fused
61 = Surge None 10 =
62 = Surge @
Standard
25°C after Weibull 20 = Low
63 = Surge -55°C
and +85°C after
Weibull
64 = Surge -55°C
and +85°C before
Weibull
Packaging
(C-Spec)
Blank = 7"
Reel
7280 = 13"
Reel
Performance Characteristics
Item
Performance Characteristics
Operating Temperature
Rated Capacitance Range
Capacitance Tolerance
Rated Voltage Range
-55°C to 125°C
0.15 μF – 470 μF @ 120 Hz/25°C
K Tolerance (10%), M Tolerance (20%)
4 – 50 V
DF (120 Hz)
Refer to Part Number Electrical Specification Table
ESR (100 kHz)
Refer to Part Number Electrical Specification Table
Leakage Current
≤ 0.01 CV (µA) at rated voltage after 5 minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2062_T496_COTS • 10/19/2012
2
Fused MnO2 Tantalum Surface Mount Capacitors
T496 Hi-Rel Fused COTS MnO2 Series and DLA (DSCC) Drawing 04053
Qualification
Test
Condition
Characteristics
Δ C/C
Endurance
Moisture Resistance
Thermal Shock
Temperature Stability
85°C @ rated voltage, 2,000 hours
125°C @ 2/3 rated voltage, 2,000 hours
65°C to -10°C, 100% RH, 20 cycles, no load
MIL–STD–202, Method 107, Condition B, mounted,
-55°C to 125°C, 1,000 cycles
Extreme temperature exposure at a
succession of continuous steps at +25°C,
-55°C, +25°C, +85°C, +125°C, +25°C
DF
Within initial limits
DCL
Within 1.25 x initial limit
ESR
Within initial limits
Δ C/C
Within +/-15% of initial value
DF
Within 150 x initial limit
DCL
Within 200 x initial limit
Δ C/C
Within ±5% of initial value
DF
Within initial limits
DCL
Within 1.25 x initial limit
ESR
Within initial limits
+25°C
-55°C
+85°C
+125°C
Δ C/C
IL*
±10%
±10%
±20%
DF
IL
IL
1.5 x IL
1.5 x IL
DCL
IL
n/a
10 x IL
12 x IL
Δ C/C
Resistance to Solder Heat
Surge Voltage
Resistance to Solvents
Mechanical Shock/Vibration
Within ±10% of initial value
MIL–STD–202, Method 210, 1 cycle
25°C and 85°C, 1.32 x rated voltage 1,000 cycles
(125°C, 1.2 x rated voltage)
MIL–STD–202, Method 215, Aqueous wash chemical or
equivalent
MIL–STD–202, Method 213, Condition I, 100 G peak
MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
Within ±5% of initial value
DF
Within initial limits
DCL
Within initial limits
Δ C/C
Within ±5% of initial value
DF
Within initial limits
DCL
Within initial limits
ESR
Within initial limits
Δ C/C
Within ±10 of initial value
DF
Within initial limits
DCL
Within initial limits
Δ C/C
Within ±10% of initial value
DF
Within initial limits
DCL
Within initial limits
*IL = Initial limit
Certification
DSCC Drawing 04053
MIL–PRF–55365/8
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2062_T496_COTS • 10/19/2012
3
Fused MnO2 Tantalum Surface Mount Capacitors
T496 Hi-Rel Fused COTS MnO2 Series and DLA (DSCC) Drawing 04053
Electrical Characteristics
Capacitance vs. Frequency
ESR vs. Frequency
1,000
1000
T496B106M016ATE3K5
T496B106M016ATE3K5_IMP
Capacitance (µF)
Impedance, ESR (Ohms)
100
T496D476M016ATE400_IMP
T496X107M016ATE700_IMP
T496B106M016ATE3K5_ESR
T496D476M016ATE400_ESR
T496X107M016ATE700_ESR
10
T496X107M016ATE700
10
1
1
0.1
T496D476M016ATE400
100
0
100
1,000
10,000
100,000
1,000,000
Frequency (Hz)
10,000,000
100
1,000
10,000
100,000
Frequency (Hz)
1,000,000
10,000,000
Dimensions – Millimeters (Inches)
Metric will govern
Termination
cutout at
KEMET’s
option,
either end
Case Size
KEMET
EIA
Component
L*
W*
H*
F* ±0.1 S* ±0.3 B* ±0.15
±(0.004) ±(0.012) (Ref) ±0.006
X (Ref)
P (Ref)
R (Ref)
T (Ref)
A (Min) G (Ref) E (Ref)
B
3.5 ±02
2.8 ±0.2
1.9 ±0.2
3528–21 (0.138
±0.008) (0.110 ±0.008) (0.075 ±0.008) 2.2 (0.087) 0.8 (0.031)
0.4 (0.016)
0.10 ±0.10
(0.004 ±0.004) 0.5 (0.020)
1.0 (0.039) 0.13 (0.005) 1.1 (0.043) 1.8 (0.071) 2.2 (0.087)
C
6.0 ±0.3
3.2 ±0.3
2.5 ±0.3
6032–28 (0.236
±0.03) (0.126 ±0.012) (0.098 ±0.012) 2.2 (0.087) 1.3 (0.051)
0.5 (0.020)
0.10 ±0.10
(0.004 ±0.004) 0.9 (0.035)
1.0 (0.039) 0.13 (0.005) 2.5 (0.098) 2.8 (0.110) 2.4 (0.094)
D
7.3 ±0.3
4.3 ±0.3
2.8 ±0.3
7343–31 (0.287
±0.012) (0.169 ±0.012) (0.110 ±0.012) 2.4 (0.094) 1.3 (0.051)
0.5 (0.020)
0.10 ±0.10
(0.004 ±0.004) 0.9 (0.035)
1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138)
X
7.3 ±0.3
4.3 ±0.3
4.0 ±0.3
7343–43 (0.287
±0.012) (0.169 ±0.012) (0.157 ±0.012) 2.4 (0.094) 1.3 (0.051)
0.5 (0.020)
0.10 ±0.10
(0.004 ±0.004) 1.7 (0.067)
1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138)
Notes: (Ref) – Dimensions provided for reference only. No dimensions provided for B, P or R because low profile cases do not have a bevel or a notch.
* MIL–C–55365/8 specified dimensions
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2062_T496_COTS • 10/19/2012
4
Fused MnO2 Tantalum Surface Mount Capacitors
T496 Hi-Rel Fused COTS MnO2 Series and DLA (DSCC) Drawing 04053
Table 1 – Ratings & Part Number Reference
Rated
Voltage
Rated
Case Code/
Capacitance Case Size
KEMET
Part Number
DC
Leakage
DF
ESR
DLA (DSCC)
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Maximum/
5 Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ +20ºC
100 kHz
Maximum
Drawing
Number
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
68
68
68
100
100
150
150
150
220
220
220
330
330
330
330
330
470
470
4.7
4.7
6.8
6.8
10
10
15
15
22
22
22
22
22
33
33
33
47
47
47
47
47
68
68
68
68
100
100
100
100
100
100
100
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
C/6032-28
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
C/6032-28
C/6032-28
B/3528-21
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
C/6032-28
C/6032-28
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
D/7343-31
D/7343-31
D/7343-31
C/6032-28
T496C686(1)004(2)(3)(4)10
T496C686(1)004(2)(3)(4)20
T496C686M004(2)H4095
T496C107(1)004(2)(3)(4)10
T496C107M004(2)H4095
T496D157(1)004(2)(3)(4)10
T496D157M004(2)H4095
T496C157(1)004(2)(3)(4)10
T496D227(1)004(2)(3)(4)10
T496D227(1)004(2)(3)(4)20
T496D227M004(2)H4095
T496D337(1)004(2)(3)(4)10
T496D337(1)004(2)(3)(4)20
T496D337M004(2)H4095
T496X337(1)004(2)(3)(4)10
T496X337M004(2)H4095
T496X477(1)004(2)(3)(4)10
T496X477M004(2)H4095
T496B475(1)006(2)(3)(4)10
T496B475M006(2)H4095
T496B685(1)006(2)(3)(4)10
T496B685M006(2)H4095
T496B106(1)006(2)(3)(4)10
T496B106M006(2)H4095
T496C156(1)006(2)(3)(4)10
T496C156M006(2)H4095
T496B226(1)006(2)(3)(4)10
T496B226(1)006(2)(3)(4)10
T496B226M006(2)H4095
T496C226(1)006(2)(3)(4)10
T496C226M006(2)H4095
T496C336(1)006(2)(3)(4)10
T496C336(1)006(2)(3)(4)20
T496C336M006(2)H4095
T496C476(1)006(2)(3)(4)10
T496C476(1)006(2)(3)(4)20
T496C476M006(2)H4095
T496D476(1)006(2)(3)(4)10
T496D476M006(2)H4095
T496C686(1)006(2)(3)(4)10
T496C686M006(2)H4095
T496D686(1)006(2)(3)(4)10
T496D686M006(2)H4095
T496X107(1)006(2)(3)(4)10
T496X107(1)006(2)(3)(4)20
T496X107M006(2)H4095
T496D107(1)006(2)(3)(4)10
T496D107(1)006(2)(3)(4)20
T496D107M006(2)H4095
T496C107(1)006(2)(3)(4)10
2.7
2.7
2.7
4.0
4.0
6.0
6.0
6.0
8.8
8.8
8.8
13.2
13.2
13.2
13.2
13.2
18.8
18.8
0.3
0.3
0.4
0.4
0.6
0.6
0.9
0.9
1.4
1.4
1.4
1.4
1.4
2.1
2.1
2.1
3.0
3.0
3.0
3.0
3.0
4.3
4.3
4.3
4.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.0
6.0
6.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
1600
400
1600
1200
1200
800
800
1200
700
400
700
700
400
700
700
700
500
500
3500
3500
3500
3500
3500
3500
2000
2000
3500
1500
3500
2000
2000
2000
600
2000
1600
600
1600
1000
1000
1200
1200
1000
1000
900
300
300
800
400
800
400
N/A
N/A
04053-001(2)
N/A
04053-002(2)
N/A
04053-003(2)
N/A
N/A
N/A
04053-004(2)
N/A
N/A
04053-005(2)
N/A
04053-006(2)
N/A
04053-007(2)
N/A
04053-008(2)
N/A
04053-009(2)
N/A
04053-010(2)
N/A
04053-011(2)
N/A
N/A
04053-012(2)
N/A
04053-013(2)
N/A
N/A
04053-014(2)
N/A
N/A
04053-016(2)
N/A
04053-015(2)
N/A
04053-018(2)
N/A
04053-017(2)
N/A
N/A
04053-019(2)
N/A
N/A
04053-020(2)
N/A
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Maximum/
5 Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ +20ºC
100 kHz
Maximum
Drawing
Number
Rated Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
DLA (DSCC)
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert Insert B (0.1%/1,000 hours), C (0.01%/1,000 hours), D (0.001%/1,000 hours), or Z (Non-Weibull Graded).
(3) To complete KEMET part number, insert C = Hot Solder Dipped, H = Solder Plated, K = Solder Fused, or T = 100% Tin (Sn). Designates Termination Finish.
(4) To complete KEMET part number, insert 61 = No Surge, 62 = 10 cycles Surge +25°C, 63 = 10 cycles Surge -55°C and +85°C after Weibull or 64 = 10 cycles
Surge -55°C and +85°C before Weibull; N/A for DLA (DSCC) 04053 product - 4095 applies.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
Roll Over for
Order Info.
T2062_T496_COTS • 10/19/2012
5
Fused MnO2 Tantalum Surface Mount Capacitors
T496 Hi-Rel Fused COTS MnO2 Series and DLA (DSCC) Drawing 04053
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated
Case Code/
Capacitance Case Size
KEMET
Part Number
DC
Leakage
DF
ESR
DLA (DSCC)
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Maximum/
5 Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ +20ºC
100 kHz
Maximum
Drawing
Number
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
150
150
150
150
220
220
220
220
220
220
330
330
330
3.3
3.3
4.7
4.7
6.8
6.8
10
10
15
15
15
15
15
22
22
22
33
33
33
33
33
33
47
47
47
47
47
47
68
68
68
68
68
100
100
100
100
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
C/6032-28
C/6032-28
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
C/6032-28
C/6032-28
C/6032-28
X/7343-43
X/7343-43
D/7343-31
D/7343-31
D/7343-31
X/7343-43
D/7343-31
D/7343-31
D/7343-31
T496D157(1)006(2)(3)(4)10
T496D157(1)006(2)(3)(4)20
T496D157M006(2)H4095
T496X157(1)006(2)(3)(4)10
T496X227(1)006(2)(3)(4)10
T496X227(1)006(2)(3)(4)20
T496X227M006(2)H4095
T496D227(1)006(2)(3)(4)10
T496D227(1)006(2)(3)(4)20
T496D227M006(2)H4095
T496X337(1)006(2)(3)(4)10
T496X337(1)006(2)(3)(4)10
T496X337M006(2)H4095
T496B335(1)010(2)(3)(4)10
T496B335M010(2)H4095
T496B475(1)010(2)(3)(4)10
T496B475M010(2)H4095
T496B685(1)010(2)(3)(4)10
T496B685M010(2)H4095
T496C106(1)010(2)(3)(4)10
T496C106M010(2)H4095
T496B156(1)010(2)(3)(4)10
T496B156M010(2)H4095
T496C156(1)010(2)(3)(4)10
T496C156(1)010(2)(3)(4)20
T496C156M010(2)H4095
T496C226(1)010(2)(3)(4)10
T496C226(1)010(2)(3)(4)20
T496C226M010(2)H4095
T496D336(1)010(2)(3)(4)10
T496D336(1)010(2)(3)(4)20
T496D336M010(2)H4095
T496C336(1)010(2)(3)(4)10
T496C336(1)010(2)(3)(4)20
T496C336M010(2)H4095
T496D476(1)010(2)(3)(4)10
T496D476(1)010(2)(3)(4)20
T496D476M010(2)H4095
T496C476(1)010(2)(3)(4)10
T496C476(1)010(2)(3)(4)20
T496C476M010(2)H4095
T496X686(1)010(2)(3)(4)10
T496X686M010(2)H4095
T496D686(1)010(2)(3)(4)10
T496D686(1)010(2)(3)(4)20
T496D686M010(2)H4095
T496X107(1)010(2)(3)(4)10
T496D107(1)010(2)(3)(4)10
T496D107(1)010(2)(3)(4)20
T496D107M010(2)H4095
9.5
9.5
9.5
9.5
13.9
13.9
13.9
13.9
13.9
13.9
20.8
20.8
20.8
0.3
0.3
0.5
0.5
0.7
0.7
1.0
1.0
1.5
1.5
1.5
1.5
1.5
2.2
2.2
2.2
3.3
3.3
3.3
3.3
3.3
3.3
4.7
4.7
4.7
4.7
4.7
4.7
6.8
6.8
6.8
6.8
6.8
10.0
10.0
10.0
10.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
8.0
8.0
8.0
700
300
700
300
700
300
700
700
300
700
500
300
500
3500
3500
3500
3500
3500
3500
2000
2000
3500
3500
2000
600
2000
2000
500
2000
1000
400
1000
1600
400
1600
1000
400
1000
1200
400
1200
900
900
800
400
800
400
700
400
700
N/A
N/A
04053-021(2)
N/A
N/A
N/A
04053-023(2)
N/A
N/A
04053-022(2)
N/A
N/A
04053-024(2)
N/A
04053-025(2)
N/A
04053-026(2)
N/A
04053-027(2)
N/A
04053-028(2)
N/A
04053-029(2)
N/A
N/A
04053-030(2)
N/A
N/A
04053-031(2)
N/A
N/A
04053-032(2)
N/A
N/A
04053-033(2)
N/A
N/A
04053-034(2)
N/A
N/A
04053-035(2)
N/A
04053-036(2)
N/A
N/A
04053-037(2)
N/A
N/A
N/A
04053-038(2)
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Maximum/
5 Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ +20ºC
100 kHz
Maximum
Drawing
Number
Rated Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
DLA (DSCC)
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert Insert B (0.1%/1,000 hours), C (0.01%/1,000 hours), D (0.001%/1,000 hours), or Z (Non-Weibull Graded).
(3) To complete KEMET part number, insert C = Hot Solder Dipped, H = Solder Plated, K = Solder Fused, or T = 100% Tin (Sn). Designates Termination Finish.
(4) To complete KEMET part number, insert 61 = No Surge, 62 = 10 cycles Surge +25°C, 63 = 10 cycles Surge -55°C and +85°C after Weibull or 64 = 10 cycles
Surge -55°C and +85°C before Weibull; N/A for DLA (DSCC) 04053 product - 4095 applies.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
Roll Over for
Order Info.
T2062_T496_COTS • 10/19/2012
6
Fused MnO2 Tantalum Surface Mount Capacitors
T496 Hi-Rel Fused COTS MnO2 Series and DLA (DSCC) Drawing 04053
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated
Case Code/
Capacitance Case Size
KEMET
Part Number
DC
Leakage
DF
ESR
DLA (DSCC)
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Maximum/
5 Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ +20ºC
100 kHz
Maximum
Drawing
Number
10
10
10
10
10
10
10
10
10
10
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
20
20
20
150
150
150
150
150
150
220
220
220
220
2.2
2.2
3.3
3.3
3.3
4.7
4.7
4.7
6.8
6.8
6.8
10
10
10
10
10
15
15
15
22
22
22
22
22
22
33
33
33
47
47
47
47
47
47
68
100
100
1.5
1.5
2.2
X/7343-43
X/7343-43
X/7343-43
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
D/7343-31
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
B/3528-21
B/3528-21
B/3528-21
T496X157(1)010(2)(3)(4)10
T496X157(1)010(2)(3)(4)20
T496X157M010(2)H4095
T496D157(1)010(2)(3)(4)10
T496D157(1)010(2)(3)(4)20
T496D157M010(2)H4095
T496X227(1)010(2)(3)(4)10
T496X227(1)010(2)(3)(4)20
T496X227M010(2)H4095
T496D227(1)010(2)(3)(4)10
T496B225(1)016(2)(3)(4)10
T496B225M016(2)H4095
T496B335(1)016(2)(3)(4)10
T496B335(1)016(2)(3)(4)20
T496B335M016(2)H4095
T496B475(1)016(2)(3)(4)10
T496B475(1)016(2)(3)(4)20
T496B475M016(2)H4095
T496C685(1)016(2)(3)(4)10
T496C685(1)016(2)(3)(4)20
T496C685M016(2)H4095
T496B106(1)016(2)(3)(4)10
T496B106M016(2)H4095
T496C106(1)016(2)(3)(4)10
T496C106(1)016(2)(3)(4)20
T496C106M016(2)H4095
T496C156(1)016(2)(3)(4)10
T496C156(1)016(2)(3)(4)20
T496C156M016(2)H4095
T496D226(1)016(2)(3)(4)10
T496D226(1)016(2)(3)(4)20
T496D226M016(2)H4095
T496C226(1)016(2)(3)(4)10
T496C226(1)016(2)(3)(4)20
T496C226M016(2)H4095
T496D336(1)016(2)(3)(4)10
T496D336(1)016(2)(3)(4)20
T496D336M016(2)H4095
T496X476(1)016(2)(3)(4)10
T496X476(1)016(2)(3)(4)20
T496X476M016(2)H4095
T496D476(1)016(2)(3)(4)10
T496D476(1)016(2)(3)(4)20
T496D476M016(2)H4095
T496D686(1)016(2)(3)(4)10
T496X107(1)016(2)(3)(4)10
T496X107M016(2)H4095
T496B155(1)020(2)(3)(4)10
T496B155M020(2)H4095
T496B225(1)020(2)(3)(4)10
15.0
15.0
15.0
15.0
15.0
15.0
22.0
22.0
22.0
22.0
0.4
0.4
0.5
0.5
0.5
0.8
0.8
0.8
1.1
1.1
1.1
1.6
1.6
1.6
1.6
1.6
2.4
2.4
2.4
3.5
3.5
3.5
3.5
3.5
3.5
5.3
5.3
5.3
7.5
7.5
7.5
7.5
7.5
7.5
10.9
16.0
16.0
0.3
0.3
0.4
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
8.0
8.0
6.0
6.0
6.0
700
400
700
700
400
700
500
300
500
300
3500
3500
3500
2100
3500
3500
1600
3500
2000
600
2000
3500
3500
2000
700
2000
2000
600
2000
1000
500
1000
1600
1000
1600
1000
400
1000
900
400
900
800
400
800
400
700
700
5000
5000
3500
N/A
N/A
04053-039(2)
N/A
N/A
04053-040(2)
N/A
N/A
04053-041(2)
N/A
N/A
04053-042(2)
N/A
N/A
04053-043(2)
N/A
N/A
04053-044(2)
N/A
N/A
04053-045(2)
N/A
04053-046(2)
N/A
N/A
04053-047(2)
N/A
N/A
04053-048(2)
N/A
N/A
04053-049(2)
N/A
N/A
04053-050(2)
N/A
N/A
04053-051(2)
N/A
N/A
04053-052(2)
N/A
N/A
04053-053(2)
N/A
N/A
04053-054(2)
N/A
04053-055(2)
N/A
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Maximum/
5 Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ +20ºC
100 kHz
Maximum
Drawing
Number
Rated Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
DLA (DSCC)
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert Insert B (0.1%/1,000 hours), C (0.01%/1,000 hours), D (0.001%/1,000 hours), or Z (Non-Weibull Graded).
(3) To complete KEMET part number, insert C = Hot Solder Dipped, H = Solder Plated, K = Solder Fused, or T = 100% Tin (Sn). Designates Termination Finish.
(4) To complete KEMET part number, insert 61 = No Surge, 62 = 10 cycles Surge +25°C, 63 = 10 cycles Surge -55°C and +85°C after Weibull or 64 = 10 cycles
Surge -55°C and +85°C before Weibull; N/A for DLA (DSCC) 04053 product - 4095 applies.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
Roll Over for
Order Info.
T2062_T496_COTS • 10/19/2012
7
Fused MnO2 Tantalum Surface Mount Capacitors
T496 Hi-Rel Fused COTS MnO2 Series and DLA (DSCC) Drawing 04053
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated
Case Code/
Capacitance Case Size
KEMET
Part Number
DC
Leakage
DF
ESR
DLA (DSCC)
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Maximum/
5 Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ +20ºC
100 kHz
Maximum
Drawing
Number
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
2.2
2.2
3.3
3.3
4.7
4.7
6.8
6.8
6.8
10
10
10
15
15
15
15
22
22
22
33
33
33
33
47
47
47
0.68
0.68
1
1
1
1.5
1.5
1.5
2.2
2.2
3.3
3.3
3.3
4.7
4.7
4.7
4.7
6.8
6.8
6.8
10
10
10
10
B/3528-21
B/3528-21
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
C/6032-28
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
D/7343-31
X/7343-43
X/7343-43
D/7343-31
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
B/3528-21
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
T496B225(1)020(2)(3)(4)20
T496B225M020(2)H4095
T496B335(1)020(2)(3)(4)10
T496B335M020(2)H4095
T496C475(1)020(2)(3)(4)10
T496C475M020(2)H4095
T496C685(1)020(2)(3)(4)10
T496C685(1)020(2)(3)(4)20
T496C685M020(2)H4095
T496C106(1)020(2)(3)(4)10
T496C106(1)020(2)(3)(4)20
T496C106M020(2)H4095
T496D156(1)020(2)(3)(4)10
T496D156(1)020(2)(3)(4)20
T496D156M020(2)H4095
T496C156(1)020(2)(3)(4)10
T496D226(1)020(2)(3)(4)10
T496D226(1)020(2)(3)(4)20
T496D226M020(2)H4095
T496X336(1)020(2)(3)(4)10
T496X336(1)020(2)(3)(4)20
T496X336M020(2)H4095
T496D336(1)020(2)(3)(4)10
T496X476(1)020(2)(3)(4)10
T496X476M020(2)H4095
T496D476(1)020(2)(3)(4)10
T496B684(1)025(2)(3)(4)10
T496B684M025(2)H4095
T496B105(1)025(2)(3)(4)10
T496B105(1)025(2)(3)(4)20
T496B105M025(2)H4095
T496B155(1)025(2)(3)(4)10
T496B155(1)025(2)(3)(4)20
T496B155M025(2)H4095
T496C225(1)025(2)(3)(4)10
T496C225M025(2)H4095
T496C335(1)025(2)(3)(4)10
T496C335(1)025(2)(3)(4)20
T496C335M025(2)H4095
T496B475(1)025(2)(3)(4)10
T496C475(1)025(2)(3)(4)10
T496C475(1)025(2)(3)(4)20
T496C475M025(2)H4095
T496C685(1)025(2)(3)(4)10
T496C685(1)025(2)(3)(4)20
T496C685M025(2)H4095
T496C106(1)025(2)(3)(4)10
T496C106M025(2)H4095
T496D106(1)025(2)(3)(4)10
T496D106(1)025(2)(3)(4)20
0.4
0.4
0.7
0.7
0.9
0.9
1.4
1.4
1.4
2.0
2.0
2.0
3.0
3.0
3.0
3.0
4.4
4.4
4.4
6.6
6.6
6.6
6.6
9.4
9.4
9.4
0.2
0.2
0.3
0.3
0.3
0.4
0.4
0.4
0.6
0.6
0.8
0.8
0.8
1.2
1.2
1.2
1.2
1.7
1.7
1.7
2.5
2.5
2.5
2.5
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
4.0
4.0
4.0
4.0
4.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
1600
3500
3500
3500
2000
2000
2000
600
2000
2000
800
2000
1000
500
1000
500
1000
500
1000
900
400
900
400
300
300
300
6500
6500
5000
3500
5000
5000
1600
5000
3500
3500
2500
2100
2500
4000
2500
1300
2500
2000
600
2000
600
600
1200
600
N/A
04053-056(2)
N/A
04053-057(2)
N/A
04053-058(2)
N/A
N/A
04053-059(2)
N/A
N/A
04053-060(2)
N/A
N/A
04053-061(2)
N/A
N/A
N/A
04053-062(2)
N/A
N/A
04053-063(2)
N/A
N/A
04053-064(2)
N/A
N/A
04053-065(2)
N/A
N/A
04053-066(2)
N/A
N/A
04053-067(2)
N/A
04053-068(2)
N/A
N/A
04053-069(2)
N/A
N/A
N/A
04053-070(2)
N/A
N/A
04053-071(2)
N/A
04053-072(2)
N/A
N/A
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Maximum/
5 Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ +20ºC
100 kHz
Maximum
Drawing
Number
Rated Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
DLA (DSCC)
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert Insert B (0.1%/1,000 hours), C (0.01%/1,000 hours), D (0.001%/1,000 hours), or Z (Non-Weibull Graded).
(3) To complete KEMET part number, insert C = Hot Solder Dipped, H = Solder Plated, K = Solder Fused, or T = 100% Tin (Sn). Designates Termination Finish.
(4) To complete KEMET part number, insert 61 = No Surge, 62 = 10 cycles Surge +25°C, 63 = 10 cycles Surge -55°C and +85°C after Weibull or 64 = 10 cycles
Surge -55°C and +85°C before Weibull; N/A for DLA (DSCC) 04053 product - 4095 applies.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
Roll Over for
Order Info.
T2062_T496_COTS • 10/19/2012
8
Fused MnO2 Tantalum Surface Mount Capacitors
T496 Hi-Rel Fused COTS MnO2 Series and DLA (DSCC) Drawing 04053
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated
Case Code/
Capacitance Case Size
KEMET
Part Number
DC
Leakage
DF
ESR
DLA (DSCC)
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Maximum/
5 Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ +20ºC
100 kHz
Maximum
Drawing
Number
25
25
25
25
25
25
25
25
25
25
25
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
50
50
50
50
50
50
10
15
15
15
15
22
22
22
22
22
22
0.47
0.47
0.47
0.68
0.68
1
1
1
1.5
1.5
1.5
2.2
2.2
2.2
3.3
3.3
3.3
4.7
4.7
4.7
6.8
6.8
6.8
10
10
10
10
15
15
15
15
22
22
0.15
0.15
0.22
0.22
0.22
0.33
D/7343-31
C/6032-28
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
D/7343-31
D/7343-31
D/7343-31
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
D/7343-31
X/7343-43
X/7343-43
X/7343-43
D/7343-31
X/7343-43
X/7343-43
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
T496D106M025(2)H4095
T496C156(1)025(2)(3)(4)10
T496D156(1)025(2)(3)(4)10
T496D156(1)025(2)(3)(4)20
T496D156M025(2)H4095
T496X226(1)025(2)(3)(4)10
T496X226(1)025(2)(3)(4)20
T496X226M025(2)H4095
T496D226(1)025(2)(3)(4)10
T496D226(1)025(2)(3)(4)20
T496D226M025(2)H4095
T496B474(1)035(2)(3)(4)10
T496B474(1)035(2)(3)(4)20
T496B474M035(2)H4095
T496B684(1)035(2)(3)(4)10
T496B684M035(2)H4095
T496B105(1)035(2)(3)(4)10
T496B105(1)035(2)(3)(4)20
T496B105M035(2)H4095
T496C155(1)035(2)(3)(4)10
T496C155(1)035(2)(3)(4)20
T496C155M035(2)H4095
T496C225(1)035(2)(3)(4)10
T496C225(1)035(2)(3)(4)20
T496C225M035(2)H4095
T496C335(1)035(2)(3)(4)10
T496C335(1)035(2)(3)(4)20
T496C335M035(2)H4095
T496D475(1)035(2)(3)(4)10
T496D475(1)035(2)(3)(4)20
T496D475M035(2)H4095
T496D685(1)035(2)(3)(4)10
T496D685(1)035(2)(3)(4)20
T496D685M035(2)H4095
T496X106(1)035(2)(3)(4)10
T496X106(1)035(2)(3)(4)20
T496X106M035(2)H4095
T496D106(1)035(2)(3)(4)10
T496X156(1)035(2)(3)(4)10
T496X156(1)035(2)(3)(4)20
T496X156M035(2)H4095
T496D156(1)035(2)(3)(4)10
T496X226(1)035(2)(3)(4)10
T496X226M035(2)H4095
T496B154(1)050(2)(3)(4)10
T496B154M050(2)H4095
T496B224(1)050(2)(3)(4)10
T496B224(1)050(2)(3)(4)20
T496B224M050(2)H4095
T496B334(1)050(2)(3)(4)10
2.5
3.8
3.8
3.8
3.8
5.5
5.5
5.5
5.5
5.5
5.5
0.2
0.2
0.2
0.2
0.2
0.4
0.4
0.4
0.5
0.5
0.5
0.8
0.8
0.8
1.2
1.2
1.2
1.6
1.6
1.6
2.4
2.4
2.4
3.5
3.5
3.5
3.5
5.3
5.3
5.3
5.3
7.7
7.7
0.1
0.1
0.1
0.1
0.1
0.2
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
4.0
4.0
4.0
4.0
4.0
4.0
1200
750
1000
500
1000
900
400
900
800
400
800
8000
2600
8000
6500
6500
5000
3100
5000
4500
2600
4500
3500
1600
3500
2500
900
2500
1500
700
1500
1300
750
1300
1000
500
1000
400
900
500
900
500
300
300
16000
16000
14000
10000
14000
10000
04053-073(2)
N/A
N/A
N/A
04053-074(2)
N/A
N/A
04053-075(2)
N/A
N/A
04053-076(2)
N/A
N/A
04053-077(2)
N/A
04053-078(2)
N/A
N/A
04053-079(2)
N/A
N/A
04053-080(2)
N/A
N/A
04053-081(2)
N/A
N/A
04053-082(2)
N/A
N/A
04053-083(2)
N/A
N/A
04053-084(2)
N/A
N/A
04053-085(2)
N/A
N/A
N/A
04053-086(2)
N/A
N/A
04053-087(2)
N/A
04053-088(2)
N/A
N/A
04053-089(2)
N/A
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Maximum/
5 Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ +20ºC
100 kHz
Maximum
Drawing
Number
Rated Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
DLA (DSCC)
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert Insert B (0.1%/1,000 hours), C (0.01%/1,000 hours), D (0.001%/1,000 hours), or Z (Non-Weibull Graded).
(3) To complete KEMET part number, insert C = Hot Solder Dipped, H = Solder Plated, K = Solder Fused, or T = 100% Tin (Sn). Designates Termination Finish.
(4) To complete KEMET part number, insert 61 = No Surge, 62 = 10 cycles Surge +25°C, 63 = 10 cycles Surge -55°C and +85°C after Weibull or 64 = 10 cycles
Surge -55°C and +85°C before Weibull; N/A for DLA (DSCC) 04053 product - 4095 applies.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
Roll Over for
Order Info.
T2062_T496_COTS • 10/19/2012
9
Fused MnO2 Tantalum Surface Mount Capacitors
T496 Hi-Rel Fused COTS MnO2 Series and DLA (DSCC) Drawing 04053
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated
Case Code/
Capacitance Case Size
KEMET
Part Number
DC
Leakage
DF
ESR
DLA (DSCC)
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Maximum/
5 Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ +20ºC
100 kHz
Maximum
Drawing
Number
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
0.33
0.33
0.47
0.47
0.47
0.68
0.68
0.68
1
1
1
1.5
1.5
1.5
2.2
2.2
2.2
3.3
3.3
3.3
4.7
4.7
4.7
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
D/7343-31
T496B334(1)050(2)(3)(4)20
T496B334M050(2)H4095
T496C474(1)050(2)(3)(4)10
T496C474(1)050(2)(3)(4)20
T496C474M050(2)H4095
T496C684(1)050(2)(3)(4)10
T496C684(1)050(2)(3)(4)20
T496C684M050(2)H4095
T496C105(1)050(2)(3)(4)10
T496C105(1)050(2)(3)(4)20
T496C105M050(2)H4095
T496C155(1)050(2)(3)(4)10
T496C155(1)050(2)(3)(4)20
T496C155M050(2)H4095
T496D225(1)050(2)(3)(4)10
T496D225(1)050(2)(3)(4)20
T496D225M050(2)H4095
T496D335(1)050(2)(3)(4)10
T496D335(1)050(2)(3)(4)20
T496D335M050(2)H4095
T496X475(1)050(2)(3)(4)10
T496X475(1)050(2)(3)(4)20
T496D475(1)050(2)(3)(4)10
0.2
0.2
0.2
0.2
0.2
0.3
0.3
0.3
0.5
0.5
0.5
0.8
0.8
0.8
1.1
1.1
1.1
1.7
1.7
1.7
2.4
2.4
2.4
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
2600
10000
8000
1900
8000
7000
1700
7000
5500
2700
5500
5000
2000
5000
2500
900
2500
2000
1000
2000
1500
400
1500
N/A
04053-090(2)
N/A
N/A
04053-091(2)
N/A
N/A
04053-092(2)
N/A
N/A
04053-093(2)
N/A
N/A
04053-094(2)
N/A
N/A
04053-095(2)
N/A
N/A
04053-096(2)
N/A
N/A
N/A
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Maximum/
5 Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ +20ºC
100 kHz
Maximum
Drawing
Number
Rated Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
DLA (DSCC)
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert Insert B (0.1%/1,000 hours), C (0.01%/1,000 hours), D (0.001%/1,000 hours), or Z (Non-Weibull Graded).
(3) To complete KEMET part number, insert C = Hot Solder Dipped, H = Solder Plated, K = Solder Fused, or T = 100% Tin (Sn). Designates Termination Finish.
(4) To complete KEMET part number, insert 61 = No Surge, 62 = 10 cycles Surge +25°C, 63 = 10 cycles Surge -55°C and +85°C after Weibull or 64 = 10 cycles
Surge -55°C and +85°C before Weibull; N/A for DLA (DSCC) 04053 product - 4095 applies.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
Roll Over for
Order Info.
T2062_T496_COTS • 10/19/2012 10
Fused MnO2 Tantalum Surface Mount Capacitors
T496 Hi-Rel Fused COTS MnO2 Series and DLA (DSCC) Drawing 04053
Recommended Voltage Derating Guidelines
1.2
-55°C to 125°C
50% of VR
VR
100% of VR
VR
1
0.8
% Working Voltage
% Change in Working DC
Voltage with Temperature
Recommended Maximum
Application Voltage
% Change in Working DC Voltage
with Temperature
67%
0.6
0.4
Recommended Maximum Application
Voltage (As % of Rated Voltage)
33%
0.2
0
-55
25
85
125
Temperature (ºC)
Ripple Current/Ripple Voltage
KEMET Series
and Case Code
EIA
Case Code
Maximum Power
Dissipation (P max)
mWatts @ 25°C
w/+20°C Rise
A
B
C
D
X
E
T428P
R
S
T
U
V
T510X
T510E
3216–18
3528–21
6032–28
7343–31
7343–43
7360–38
7360–38
2012–12
3216–12
3528–12
6032–15
7343–20
7343–43
7360–38
75
85
110
150
165
200
325
25
60
70
90
125
270
285
Temperature Compensation Multipliers
for Maximum Power Dissipation
≤ 25°C
1.00
85°C
0.90
125°C
0.40
T= Environmental Temperature
Using the P max of the device, the maximum allowable rms ripple
current or voltage may be determined.
I(max) = √P max/R
E(max) = √P max*R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation(watts)
R = ESR at specified frequency (ohms)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2062_T496_COTS • 10/19/2012 11
Fused MnO2 Tantalum Surface Mount Capacitors
T496 Hi-Rel Fused COTS MnO2 Series and DLA (DSCC) Drawing 04053
Reverse Voltage
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The
positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse
voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within
these limits.
Temperature
Permissible Transient Reverse Voltage
25°C
85°C
125°C
15% of Rated Voltage
5% of Rated Voltage
1% of Rated Voltage
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Case
EIA
X
Y
C
V1
V2
X
Y
C
V1
V2
X
Y
C
V1
V2
B
3528–21
2.35
2.15
1.45
6.10
4.00
2.25
1.75
1.35
5.00
3.50
2.15
1.35
1.25
4.10
3.20
C
6032–28
2.35
2.65
2.60
8.90
4.40
2.25
2.25
2.50
7.80
3.90
2.15
1.85
2.40
6.90
3.60
D
7343–31
2.55
3.75
2.70
10.20
5.50
2.45
3.35
2.60
9.10
5.00
2.35
2.95
2.50
8.20
4.70
X¹
7343–43
2.55
3.75
2.70
10.20
5.50
2.45
3.35
2.60
9.10
5.00
2.35
2.95
2.50
8.20
4.70
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification
testing based on the conditions outlined in IPC Standard 7351 (IPC–7351).
¹ Height of these chips may create problems in wave soldering.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2062_T496_COTS • 10/19/2012 12
Fused MnO2 Tantalum Surface Mount Capacitors
T496 Hi-Rel Fused COTS MnO2 Series and DLA (DSCC) Drawing 04053
Soldering Process
Please note that although the X/7343–43 case size can withstand
wave soldering, the tall profile (4.3 mm maximum) dictates care in
wave process development.
Hand soldering should be performed with care due to the difficulty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until reflow occurs. Once reflow occurs, the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
During typical reflow operations, a slight darkening of the goldcolored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
Profile Feature
SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (TSmin)
100°C
150°C
Temperature Maximum (TSmax)
150°C
200°C
Time (ts) from Tsmin to Tsmax)
60 – 120 seconds
60 – 120 seconds
3°C/seconds maximum
Ramp-up Rate (TL to TP)
3°C/seconds maximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (tL)
60 – 150 seconds
220°C*
235°C**
60 – 150 seconds
250°C*
260°C**
Peak Temperature (TP)
Time within 5°C of Maximum
Peak Temperature (tP)
Ramp-down Rate (TP to TL)
20 seconds maximum
30 seconds maximum
6°C/seconds maximum
6°C/seconds maximum
Time 25°C to Peak Temperature
6 minutes maximum
8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reflow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
TP
TL
Temperature
KEMET’s families of surface mount capacitors are compatible
with wave (single or dual), convection, IR, or vapor phase reflow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended profile
conditions for convection and IR reflow reflect the profile conditions
of the IPC/J–STD–020D standard for moisture sensitivity testing.
The devices can safely withstand a maximum of three reflow
passes at these conditions.
tP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
tL
Tsmax
Tsmin
25
tS
25ºC to Peak
Time
Construction
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2062_T496_COTS • 10/19/2012 13
Fused MnO2 Tantalum Surface Mount Capacitors
T496 Hi-Rel Fused COTS MnO2 Series and DLA (DSCC) Drawing 04053
Capacitor Marking
KEMET
Fused
MnO2
Rated
Voltage
F+
Polarity
Indicator (+)
227
10 K
230
Picofarad Code
KEMET ID
Date
Code*
* 230 = 30th week of 2012
Date Code *
1 digit = Last number of Year
9 = 2009
0 = 2010
1 =2011
2 = 2012
3 = 2013
4 =2014
3rd and 4th digit = Week of the Year
01 = 1st week of the Year to
52 = 52nd week of the Year
st
Storage
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term
storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may
increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60%
relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of
chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years
of receipt.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2062_T496_COTS • 10/19/2012 14
Fused MnO2 Tantalum Surface Mount Capacitors
T496 Hi-Rel Fused COTS MnO2 Series and DLA (DSCC) Drawing 04053
Tape & Reel Packaging Information
KEMET’s molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in
accordance with EIA Standard 481–1: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging
system is compatible with all tape-fed automatic pick-and-place systems.
8 mm (0.315")
or
12 mm (0.472")
Top Tape Thickness
0.10 mm (0.004")
Maximum Thickness
180 mm (7.0")
or
330 mm (13.0")
Table 3 – Packaging Quantity
Case Code
KEMET
R
I
S
T
M
U
L
W
Z
V
A
B
C
D
Y
X
E/T428P
H
EIA
2012-12
3216-10
3216-12
3528-12
3528-15
6032-15
6032-19
7343-15
7343-17
7343-20
3216-18
3528-21
6032-28
7343-31
7343-40
7343-43
7360-38
7360-20
Tape Width
(mm)
7" Reel*
13" Reel*
8
8
8
8
8
12
12
12
12
12
8
8
12
12
12
12
12
12
2,500
3,000
2,500
2,500
2,000
1,000
1,000
1,000
1,000
1,000
2,000
2,000
500
500
500
500
500
1,000
10,000
12,000
10,000
10,000
8,000
5,000
5,000
3,000
3,000
3,000
9,000
8,000
3,000
2,500
2,000
2,000
2,000
2,500
* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2062_T496_COTS • 10/19/2012 15
Fused MnO2 Tantalum Surface Mount Capacitors
T496 Hi-Rel Fused COTS MnO2 Series and DLA (DSCC) Drawing 04053
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
P2
T
T2
ØDo
Po
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
E1
Ao
F
Ko
W
B1
E2
Bo
S1
P1
T1
Center Lines of Cavity
ØD 1
Cover Tape
B 1 is for tape feeder reference only,
including draft concentric about B o.
Embossment
For cavity size,
see Note 1 Table 4
User Direction of Unreeling
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
D0
8 mm
12 mm
1.5 +0.10/-0.0
(0.059 +0.004/-0.0)
16 mm
D1 Minimum
Note 1
1.0
(0.039)
1.5
(0.059)
E1
P0
P2
1.75 ±0.10
(0.069 ±0.004)
4.0 ±0.10
(0.157 ±0.004)
2.0 ±0.05
(0.079 ±0.002)
R Reference
Note 2
25.0
(0.984)
30
(1.181)
S1 Minimum
Note 3
0.600
(0.024)
T Maximum T1 Maximum
0.600
(0.024)
0.100
(0.004)
Variable Dimensions — Millimeters (Inches)
Tape Size
Pitch
8 mm
Single (4 mm)
12 mm
Single (4 mm) &
Double (8 mm)
16 mm
Triple (12 mm)
B1 Maximum
Note 4
4.35
(0.171)
8.2
(0.323)
12.1
(0.476)
E2 Minimum
F
P1
T2 Maximum
W Maximum
A0,B0 & K0
6.25
(0.246)
10.25
(0.404)
14.25
(0.561)
3.5 ±0.05
(0.138 ±0.002)
5.5 ±0.05
(0.217 ±0.002)
5.5 ±0.05
(0.217 ±0.002)
4.0 ±0.10
(0.157 ±0.004)
8.0 ±0.10
(0.315 ±0.004)
8.0 ±0.10
(0.315 ±0.004)
2.5
(0.098)
4.6
(0.181)
4.6
(0.181)
8.3
(0.327)
12.3
(0.484)
16.3
(0.642)
Note 5
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 5).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2062_T496_COTS • 10/19/2012 16
Fused MnO2 Tantalum Surface Mount Capacitors
T496 Hi-Rel Fused COTS MnO2 Series and DLA (DSCC) Drawing 04053
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
Peel Strength
8 mm
0.1 to 1.0 Newton (10 to 100 gf)
12 and 16 mm
0.1 to 1.3 Newton (10 to 130 gf)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180°
from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
°
T
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Typical Pocket Centerline
Tape
Width (mm)
8,12
16 – 200
Bo
Maximum
Rotation (
20
10
°
T)
Typical Component Centerline
Ao
Figure 3 – Maximum Lateral Movement
8 mm & 12 mm Tape
0.5 mm maximum
0.5 mm maximum
16 mm Tape
°
s
Tape
Maximum
Width (mm) Rotation (
8,12
20
16 – 56
10
72 – 200
5
°
S)
Figure 4 – Bending Radius
Embossed
Carrier
Punched
Carrier
1.0 mm maximum
1.0 mm maximum
R
Bending
Radius
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
R
T2062_T496_COTS • 10/19/2012 17
Fused MnO2 Tantalum Surface Mount Capacitors
T496 Hi-Rel Fused COTS MnO2 Series and DLA (DSCC) Drawing 04053
Figure 5 – Reel Dimensions
Full Radius,
See Note
W3 (Includes
Access Hole at
Slot Location
(Ø 40 mm minimum)
flange distortion
at outer edge)
W2 (Measured at hub)
D
A
N
(See Note)
C
(Arbor hole
diameter)
B
(see Note)
W1 (Measured at hub)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
Note: Drive spokes optional; if used, dimensions B and D shall apply.
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
A
B Minimum
C
D Minimum
8 mm
178 ±0.20
(7.008 ±0.008)
or
330 ±0.20
(13.000 ±0.008)
1.5
(0.059)
13.0 +0.5/-0.2
(0.521 +0.02/-0.008)
20.2
(0.795)
12 mm
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size
N Minimum
W1
W2 Maximum
W3
50
(1.969)
8.4 +1.5/-0.0
(0.331 +0.059/-0.0)
12.4 +2.0/-0.0
(0.488 +0.078/-0.0)
16.4 +2.0/-0.0
(0.646 +0.078/-0.0)
14.4
(0.567)
18.4
(0.724)
22.4
(0.882)
Shall accommodate tape width
without interference
8 mm
12 mm
16 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2062_T496_COTS • 10/19/2012 18
Fused MnO2 Tantalum Surface Mount Capacitors
T496 Hi-Rel Fused COTS MnO2 Series and DLA (DSCC) Drawing 04053
Figure 6 – Tape Leader & Trailer Dimensions
Embossed Carrier
Carrier Tape
Punched Carrier
8 mm & 12 mm only
END
Round Sprocket Holes
START
Top Cover Tape
Elongated Sprocket Holes
(32 mm tape and wider)
Trailer
160 mm Minimum
Components
100 mm
Minimum Leader
400 mm Minimum
Top Cover Tape
Figure 7 – Maximum Camber
Elongated sprocket holes
(32 mm & wider tapes)
Carrier Tape
Round Sprocket Holes
1 mm Maximum, either direction
Straight Edge
250 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2062_T496_COTS • 10/19/2012 19
Fused MnO2 Tantalum Surface Mount Capacitors
T496 Hi-Rel Fused COTS MnO2 Series and DLA (DSCC) Drawing 04053
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Paris, France
Tel: 33-1-4646-1006
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Sasso Marconi, Italy
Tel: 39-051-939111
Shenzhen, China
Tel: 86-755-2518-1306
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Kamen, Germany
Tel: 49-2307-438110
North America
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-460122
2835 KEMET Way
Simpsonville, SC 29681
Southeast
Lake Mary, FL
Tel: 407-855-8886
Espoo, Finland
Tel: 358-9-5406-5000
Northeast
Wilmington, MA
Tel: 978-658-1663
Beijing, China
Tel: 86-10-5829-1711
Shanghai, China
Tel: 86-21-6447-0707
Taipei, Taiwan
Tel: 886-2-27528585
Southeast Asia
Singapore
Tel: 65-6586-1900
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Central
Novi, MI
Tel: 248-994-1030
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2062_T496_COTS • 10/19/2012 20
Fused MnO2 Tantalum Surface Mount Capacitors
T496 Hi-Rel Fused COTS MnO2 Series and DLA (DSCC) Drawing 04053
Other KEMET Resources
Tools
Resource
Location
Configure A Part: CapEdge
http://capacitoredge.kemet.com
SPICE & FIT Software
http://www.kemet.com/spice
Search Our FAQs: KnowledgeEdge
http://www.kemet.com/keask
Product Information
Resource
Location
Products
Technical Resources (Including Soldering Techniques)
RoHS Statement
Quality Documents
http://www.kemet.com/products
http://www.kemet.com/technicalpapers
http://www.kemet.com/rohs
http://www.kemet.com/qualitydocuments
Product Request
Resource
Location
Sample Request
Engineering Kit Request
http://www.kemet.com/sample
http://www.kemet.com/kits
Contact
Resource
Location
Website
Contact Us
Investor Relations
www.kemet.com
http://www.kemet.com/contact
http://www.kemet.com/ir
Call Us
1-877-MyKEMET
Twitter
http://twitter.com/kemetcapacitors
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) are subject to change without notice.
All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we
specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite
experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the
use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur.
Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or
redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2062_T496_COTS • 10/19/2012 21
Fused MnO2 Tantalum Surface Mount Capacitors
T496 Hi-Rel Fused COTS MnO2 Series and DLA (DSCC) Drawing 04053
Digitally signed by Jeannette Calvo
DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corp., ou=Marketing
Communications, cn=Jeannette Calvo, email=jeannettecalvo@kemet.com
Date: 2012.10.22 14:54:26 -04'00'
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2062_T496_COTS • 10/19/2012 22
工商网监
湘ICP备2023018690号
