Tantalum Surface Mount Capacitors – Fused
T496 Fused MnO2
Overview
The T496 tantalum chip capacitors offer a "fail safe" design.
The built-in fuse element offers excellent protection from
damaging short circuit conditions in applications where
damaging high fault currents exist. Protection from costly
circuit damage due to reversed installation is offered with
this device. This series is classified as MSL (Moisture
Sensitivity Level) 1 under J STD 020: unlimited floor life time
at ≤ 30°C/85% RH.
Benefits
• Meets or exceeds EIA Standard 535BAAC
• Patented fuse assembly
• Optional gold-plated terminations
• Built-in fuse protects against short circuit mode
• 100% surge current test on C, D, and X sizes
• Halogen-free epoxy
• Capacitance values of 0.15 to 330 μF
• Tolerances of ±10% and ±20%
• Voltage rating of 4 – 50 VDC
• Fuse activation, 25°C: within 1 second at fault currents
of 4 amps and higher
• Continuous current capability: 0.75 amps
• Post actuation resistance, 25°C: 10 MΩ, minimum
• Test tabs on side of case bypass the capacitor element to
allow direct testing of the fuse assembly
• RoHS compliant and lead-free terminations
• Operating temperature range of −55°C to +125°C
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Applications
Typical applications include decoupling and filtering in computing and telecommunications end applications, such as highend servers requiring built-in fuse capability.
Environmental Compliance
RoHS compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
Built Into Tomorrow
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2010_T496 • 1/6/2021
1
Tantalum Surface Mount Capacitors – Fused
T496 Fused MnO2
K-SIM
For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET
K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels.
Ordering Information
T
496
X
227
Capacitor
Class
Series
Case
Size
Capacitance
Code (pF)
T=
Tantalum
Fail
Safe
B
C
D
X
First two digits
represent
significant
figures. Third digit
specifies number
of zeros.
M
010
A
Capacitance Rated Voltage Failure Rate/
Tolerance
(VDC)
Design
K = ±10%
M = ±20%
004 = 4
006 = 6.3
010 = 10
016 = 16
020 = 20
025 = 25
035 = 35
050 = 50
A = N/A
T
E500
Termination
Finish
ESR
T = 100% Matte
tin (Sn)-plated
H = Standard
solder coated
(SnPb 5% Pb
minimum)
E = ESR
Last three
digits specify
ESR in mΩ
(500 = 500
mΩ)
Packaging
(C-Spec)
Blank = 7" reel
7280 = 13" reel
Performance Characteristics
Item
Performance Characteristics
Operating Temperature
Rated Capacitance Range
Capacitance Tolerance
Rated Voltage Range
−55°C to 125°C
0.15 – 477 µF at 120 Hz/25°C
K tolerance (10%), M tolerance (20%)
4 – 50 V
DF (120 Hz)
Refer to Part Number Electrical Specification Table
ESR (100 kHz)
Refer to Part Number Electrical Specification Table
Leakage Current
≤ 0.01 CV (µA) at rated voltage after 5 minutes
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2010_T496 • 1/6/2021
2
Tantalum Surface Mount Capacitors – Fused
T496 Fused MnO2
Qualification
Test
Condition
Characteristics
Δ C/C
Endurance
85°C at rated voltage, 2,000 hours
125°C at 2/3 rated voltage, 2,000 hours
Within initial limits
DCL
Within 1.25 x initial limit
ESR
Within initial limits
Δ C/C
Storage Life
125°C at 0 volts, 2,000 hours
Temperature Stability
MIL–STD–202, Method 107, Condition B, mounted,
−55°C to 125°C, 1,000 cycles
Extreme temperature exposure at a
succession of continuous steps at +25°C,
−55°C, +25°C, +85°C, +125°C, +25°C
Within initial limits
DCL
Within 1.25 x initial limit
ESR
Within initial limits
Mechanical Shock/
Vibration
Within ±5% of initial value
DF
Within initial limits
DCL
Within 1.25 x initial limit
ESR
Within initial limits
+25°C
−55°C
+85°C
+125°C
Δ C/C
IL*
±10%
±10%
±20%
DF
IL
IL
1.5 x IL
1.5 x IL
DCL
IL
N/A
10 x IL
12 x IL
Δ C/C
Surge Voltage
Within ±10% of initial value
DF
Δ C/C
Thermal Shock
Within ±10% of initial value
DF
85°C, 1.32 x rated voltage 1,000 cycles
(125°C, 1.2 x rated voltage)
MIL–STD–202, Method 213, Condition I, 100 G Peak
MIL–STD–202, Method 204, Condition D, 10 Hz to
2,000 Hz, 20 G peak
Within ±5% of initial value
DF
Within initial limits
DCL
Within initial limits
ESR
Within initial limits
Δ C/C
Within ±10% of initial value
DF
Within initial limits
DCL
Within initial limits
*IL = Initial limit
Certification
DLA Drawing 04053
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2010_T496 • 1/6/2021
3
Tantalum Surface Mount Capacitors – Fused
T496 Fused MnO2
Electrical Characteristics
Capacitance vs. Frequency
ESR vs. Frequency
1,000
1,000
T496B106M016ATE3K5
T496B106M016ATE3K5_IMP
Capacitance (µF)
Impedance, ESR (Ohms)
100
T496D476M016ATE400_IMP
T496X107M016ATE700_IMP
T496B106M016ATE3K5_ESR
T496D476M016ATE400_ESR
T496X107M016ATE700_ESR
10
T496D476M016ATE400
100
T496X107M016ATE700
10
1
1
0
0.1
100
1,000
10,000
100,000
1,000,000
Frequency (Hz)
10,000,000
100
1,000
10,000
100,000
Frequency (Hz)
1,000,000
10,000,000
Dimensions – Millimeters (Inches)
Metric will govern
CATHODE (-) END VIEW
ANODE (+)/CATHODE (−)
END VIEW
B case Only
SIDE VIEW
B
W
F
E
X
T
S
G
S
Termination cutout
at KEMET's option,
either end
Case Size
EIA
A
B
H
KEMET
BOTTOM VIEW
P
P
R
R
L
Typical
Weight
Component
L
W
H
B ±0.15
F ±0.1 S ±0.3
±(0.004) ±(0.012) (Ref) ±0.006
X
(Ref)
P
R
T
A
G
E
(Ref) (Ref) (Ref) (Min) (Ref) (Ref)
(mg)
B
3.5 ±0.2
2.8 ±0.2
1.9 ±0.2
2.2
3528–21 (0.138
±0.008) (0.110 ±0.008) (0.075 ±0.008) (0.087)
0.8
(0.031)
0.4
(0.016)
0.10 ±0.10
0.4
1.5
0.13
1.9
1.8
2.2
(0.004 ±0.004) (0.016) (0.059) (0.005) (0.075) (0.071) (0.087)
107.45
C
6.0 ±0.3
3.2 ±0.3
2.5 ±0.3
6032–28 (0.236
±0.012) (0.126 ±0.012) (0.098 ±0.012)
2.2
(0.087)
1.3
(0.051)
0.5
(0.020)
0.10 ±0.10
0.9
1.0
0.13
3.1
2.8
2.4
(0.004 ±0.004) (0.035) (0.039) (0.005) (0.122) (0.110) (0.094)
224.48
D
7.3 ±0.3
4.3 ±0.3
2.8 ±0.3
7343–31 (0.287
±0.012) (0.169 ±0.012) (0.110 ±0.012)
2.4
(0.094)
1.3
(0.051)
0.5
(0.020)
0.10 ±0.10
0.9
1.0
0.13
3.8
3.5
3.5
(0.004 ±0.004) (0.035) (0.039) (0.005) (0.150) (0.138) (0.138)
446.84
X
7.3±0.3
4.0±0.3
4.0±0.3
7343–43 (0.287±0.012)
(0.169±0.012) (0.157±0.012)
2.4
(0.094)
1.3
(0.051)
0.5
(0.020)
0.10±0.10
1.7
1.0
0.13
3.8
3.5
3.5
(0.004±0.004) (0.067) (0.039) (0.005) (0.150) (0.138) (0.138)
652.04
Notes: (Ref) – Dimensions provided for reference only.
These weights are provided as reference. If exact weights are needed, please contact your KEMET Sales Representative
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2010_T496 • 1/6/2021
4
Tantalum Surface Mount Capacitors – Fused
T496 Fused MnO2
Table 1 – Ratings & Part Number Reference
Rated Rated
Voltage Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Max/5 Min
4
4
4
4
4
4
4
4
4
4
4
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
10
10
10
10
10
10
10
68
68
100
150
150
220
220
330
330
330
470
4.7
6.8
10
15
22
22
22
33
33
47
47
47
68
68
100
100
100
100
100
150
150
150
220
220
220
220
330
330
3.3
4.7
6.8
10
15
15
15
C/6032-28
C/6032-28
C/6032-28
D/7343-31
C/6032-28
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
B/3528-21
B/3528-21
B/3528-21
C/6032-28
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
D/7343-31
C/6032-28
D/7343-31
X/7343-43
X/7343-43
D/7343-31
D/7343-31
C/6032-28
X/7343-43
D/7343-31
D/7343-31
X/7343-43
X/7343-43
D/7343-31
D/7343-31
X/7343-43
X/7343-43
B/3528-21
B/3528-21
B/3528-21
C/6032-28
B/3528-21
C/6032-28
C/6032-28
T496C686(1)004A(2)E1K6
T496C686(1)004A(2)E400
T496C107(1)004A(2)E1K2
T496D157(1)004A(2)E800
T496C157(1)004A(2)E1K2
T496D227(1)004A(2)E700
T496D227(1)004A(2)E400
T496D337(1)004A(2)E700
T496D337(1)004A(2)E400
T496X337(1)004A(2)E700
T496X477(1)004A(2)E500
T496B475(1)006A(2)E3K5
T496B685(1)006A(2)E3K5
T496B106(1)006A(2)E3K5
T496C156(1)006A(2)E2K0
T496B226(1)006A(2)E3K5
T496B226(1)006A(2)E1K5
T496C226(1)006A(2)E2K0
T496C336(1)006A(2)E2K0
T496C336(1)006A(2)E600
T496C476(1)006A(2)E1K6
T496C476(1)006A(2)E600
T496D476(1)006A(2)E1K0
T496C686(1)006A(2)E1K2
T496D686(1)006A(2)E1K0
T496X107(1)006A(2)E900
T496X107(1)006A(2)E300
T496D107(1)006A(2)E800
T496D107(1)006A(2)E400
T496C107(1)006A(2)E400
T496X157(1)006A(2)E300
T496D157(1)006A(2)E700
T496D157(1)006A(2)E300
T496X227(1)006A(2)E700
T496X227(1)006A(2)E300
T496D227(1)006A(2)E700
T496D227(1)006A(2)E300
T496X337(1)006A(2)E500
T496X337(1)006A(2)E300
T496B335(1)010A(2)E3K5
T496B475(1)010A(2)E3K5
T496B685(1)010A(2)E3K5
T496C106(1)010A(2)E2K0
T496B156(1)010A(2)E3K5
T496C156(1)010A(2)E2K0
T496C156(1)010A(2)E600
2.7
2.7
4.0
6.0
6.0
8.8
8.8
13.2
13.2
13.2
18.8
0.3
0.4
0.6
0.9
1.4
1.4
1.4
2.1
2.1
3.0
3.0
3.0
4.3
4.3
6.3
6.3
6.3
6.3
6.3
9.5
9.5
9.5
13.9
13.9
13.9
13.9
20.8
20.8
0.3
0.5
0.7
1.0
1.5
1.5
1.5
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Max/5 Min
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
% at +25°C mΩ at +25°C
120 Hz % Max 100 kHz Max
6.0
6.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
1600
400
1200
800
1200
700
400
700
400
700
500
3500
3500
3500
2000
3500
1500
2000
2000
600
1600
600
1000
1200
1000
900
300
800
400
400
300
700
300
700
300
700
300
500
300
3500
3500
3500
2000
3500
2000
600
% at +25°C mΩ at +25°C
120 Hz % Max 100 kHz Max
DF
ESR
Maximum Allowable
Ripple Current (rms)
mA
at +25°C
100 kHz
262
524
303
433
303
463
612
463
612
486
574
156
156
156
235
156
238
235
235
428
262
428
387
303
387
428
742
433
612
524
742
463
707
486
742
463
707
574
742
156
156
156
235
156
235
428
mA
at +25°C
100 kHz
mA
at +85°C
100 kHz
236
472
273
390
273
417
551
417
551
437
517
140
140
140
212
140
214
212
212
385
236
385
348
273
348
385
668
390
551
472
668
417
636
437
668
417
636
517
668
140
140
140
212
140
212
385
mA
at +85°C
100 kHz
mA
at +125°C
100 kHz
105
210
121
173
121
185
245
185
245
194
230
62
62
62
94
62
95
94
94
171
105
171
155
121
155
171
297
173
245
210
297
185
283
194
297
185
283
230
297
62
62
62
94
62
94
171
mA
at +125°C
100 kHz
Maximum Allowable
Ripple Current (rms)
Maximum
Operating
Temp
MSL
°C
Reflow Temp
≤ 260°C
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
°C
Reflow Temp
≤ 260°C
Maximum
Operating
Temp
MSL
1) To complete KEMET part number, insert M for ± 20% or K for ± 10%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination
Finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2010_T496 • 1/6/2021
5
Tantalum Surface Mount Capacitors – Fused
T496 Fused MnO2
Table 1 – Ratings & Part Number Reference cont.
Rated Rated
Voltage Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Max/5 Min
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
22
22
33
33
33
33
47
47
47
47
68
68
68
100
100
100
150
150
150
150
220
220
220
2.2
3.3
3.3
4.7
4.7
6.8
6.8
10
10
10
15
15
22
22
22
22
33
33
47
47
47
47
68
C/6032-28
C/6032-28
D/7343-31
D/7343-31
C/6032-28
C/6032-28
D/7343-31
D/7343-31
C/6032-28
C/6032-28
X/7343-43
D/7343-31
D/7343-31
X/7343-43
D/7343-31
D/7343-31
X/7343-43
X/7343-43
D/7343-31
D/7343-31
X/7343-43
X/7343-43
D/7343-31
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
C/6032-28
C/6032-28
B/3528-21
C/6032-28
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
C/6032-28
C/6032-28
D/7343-31
D/7343-31
X/7343-43
X/7343-43
D/7343-31
D/7343-31
D/7343-31
T496C226(1)010A(2)E2K0
T496C226(1)010A(2)E500
T496D336(1)010A(2)E1K0
T496D336(1)010A(2)E400
T496C336(1)010A(2)E1K6
T496C336(1)010A(2)E400
T496D476(1)010A(2)E1K0
T496D476(1)010A(2)E400
T496C476(1)010A(2)E1K2
T496C476(1)010A(2)E400
T496X686(1)010A(2)E900
T496D686(1)010A(2)E800
T496D686(1)010A(2)E400
T496X107(1)010A(2)E400
T496D107(1)010A(2)E700
T496D107(1)010A(2)E400
T496X157(1)010A(2)E700
T496X157(1)010A(2)E400
T496D157(1)010A(2)E700
T496D157(1)010A(2)E400
T496X227(1)010A(2)E500
T496X227(1)010A(2)E300
T496D227(1)010A(2)E300
T496B225(1)016A(2)E3K5
T496B335(1)016A(2)E3K5
T496B335(1)016A(2)E2K1
T496B475(1)016A(2)E3K5
T496B475(1)016A(2)E1K6
T496C685(1)016A(2)E2K0
T496C685(1)016A(2)E600
T496B106(1)016A(2)E3K5
T496C106(1)016A(2)E2K0
T496C106(1)016A(2)E700
T496C156(1)016A(2)E2K0
T496C156(1)016A(2)E600
T496D226(1)016A(2)E1K0
T496D226(1)016A(2 E500
T496C226(1)016A(2)E1K6
T496C226(1)016A(2)E1K0
T496D336(1)016A(2)E1K0
T496D336(1)016A(2)E400
T496X476(1)016A(2)E900
T496X476(1)016A(2)E400
T496D476(1)016A(2)E800
T496D476(1)016A(2)E400
T496D686(1)016A(2)E400
2.2
2.2
3.3
3.3
3.3
3.3
4.7
4.7
4.7
4.7
6.8
6.8
6.8
10.0
10.0
10.0
15.0
15.0
15.0
15.0
22.0
22.0
22.0
0.4
0.5
0.5
0.8
0.8
1.1
1.1
1.6
1.6
1.6
2.4
2.4
3.5
3.5
3.5
3.5
5.3
5.3
7.5
7.5
7.5
7.5
10.9
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Max/5 Min
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
% at +25°C mΩ at +25°C
120 Hz % Max 100 kHz Max
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
2000
500
1000
400
1600
400
1000
400
1200
400
900
800
400
400
700
400
700
400
700
400
500
300
300
3500
3500
2100
3500
1600
2000
600
3500
2000
700
2000
600
1000
500
1600
1000
1000
400
900
400
800
400
400
% at +25°C mΩ at +25°C
120 Hz % Max 100 kHz Max
DF
ESR
Maximum Allowable
Ripple Current (rms)
mA
at +25°C
100 kHz
235
469
387
612
262
524
387
612
303
524
428
433
612
642
463
612
486
642
463
612
574
742
707
156
156
201
156
230
235
428
156
235
396
235
428
387
548
262
332
387
612
428
642
433
612
612
mA
at +25°C
100 kHz
mA
at +85°C
100 kHz
212
422
348
551
236
472
348
551
273
472
385
390
551
578
417
551
437
578
417
551
517
668
636
140
140
181
140
207
212
385
140
212
356
212
385
348
493
236
299
348
551
385
578
390
551
551
mA
at +85°C
100 kHz
mA
at +125°C
100 kHz
94
188
155
245
105
210
155
245
121
210
171
173
245
257
185
245
194
257
185
245
230
297
283
62
62
80
62
92
94
171
62
94
158
94
171
155
219
105
133
155
245
171
257
173
245
245
mA
at +125°C
100 kHz
Maximum Allowable
Ripple Current (rms)
Maximum
Operating
Temp
MSL
°C
Reflow Temp
≤ 260°C
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
°C
Reflow Temp
≤ 260°C
Maximum
Operating
Temp
MSL
1) To complete KEMET part number, insert M for ± 20% or K for ± 10%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination
Finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2010_T496 • 1/6/2021
6
Tantalum Surface Mount Capacitors – Fused
T496 Fused MnO2
Table 1 – Ratings & Part Number Reference cont.
Rated Rated
Voltage Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Max/5 Min
16
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
35
35
35
100
1.5
2.2
2.2
3.3
4.7
6.8
6.8
10
10
15
15
15
22
22
33
33
33
47
47
0.68
1
1
1.5
1.5
2.2
3.3
3.3
4.7
4.7
4.7
6.8
6.8
10
10
10
15
15
15
22
22
22
22
0.47
0.47
0.68
X/7343-43
B/3528-21
B/3528-21
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
C/6032-28
D/7343-31
D/7343-31
X/7343-43
X/7343-43
D/7343-31
X/7343-43
D/7343-31
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
B/3528-21
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
C/6032-28
D/7343-31
D/7343-31
X/7343-43
X/7343-43
D/7343-31
D/7343-31
B/3528-21
B/3528-21
B/3528-21
T496X107(1)016A(2)E700
T496B155(1)020A(2)E5K0
T496B225(1)020A(2)E3K5
T496B225(1)020A(2)E1K6
T496B335(1)020A(2)E3K5
T496C475(1)020A(2)E2K0
T496C685(1)020A(2)E2K0
T496C685(1)020A(2)E600
T496C106(1)020A(2)E2K0
T496C106(1)020A(2)E800
T496D156(1)020A(2)E1K0
T496D156(1)020A(2)E500
T496C156(1)020A(2)E500
T496D226(1)020A(2)E1K0
T496D226(1)020A(2)E500
T496X336(1)020A(2)E900
T496X336(1)020A(2)E400
T496D336(1)020A(2)E400
T496X476(1)020A(2)E300
T496D476(1)020A(2)E300
T496B684(1)025A(2)E6K5
T496B105(1)025A(2)E5K0
T496B105(1)025A(2)E3K5
T496B155(1)025A(2)E5K0
T496B155(1)025A(2)E1K6
T496C225(1)025A(2)E3K5
T496C335(1)025A(2)E2K5
T496C335(1)025A(2)E2K1
T496B475(1)025A(2)E4K0
T496C475(1)025A(2)E2K5
T496C475(1)025A(2)E1K3
T496C685(1)025A(2)E2K0
T496C685(1)025A(2)E600
T496C106(1)025A(2)E600
T496D106(1)025A(2)E1K2
T496D106(1)025A(2)E600
T496C156(1)025A(2)E750
T496D156(1)025A(2)E1K0
T496D156(1)025A(2)E500
T496X226(1)025A(2)E900
T496X226(1)025A(2)E400
T496D226(1)025A(2)E800
T496D226(1)025A(2)E400
T496B474(1)035A(2)E8K0
T496B474(1)035A(2)E2K6
T496B684(1)035A(2)E6K5
16.0
0.3
0.4
0.4
0.7
0.9
1.4
1.4
2.0
2.0
3.0
3.0
3.0
4.4
4.4
6.6
6.6
6.6
9.4
9.4
0.2
0.3
0.3
0.4
0.4
0.6
0.8
0.8
1.2
1.2
1.2
1.7
1.7
2.5
2.5
2.5
3.8
3.8
3.8
5.5
5.5
5.5
5.5
0.2
0.2
0.2
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Max/5 Min
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
% at +25°C mΩ at +25°C
120 Hz % Max 100 kHz Max
8.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
4.0
4.0
4.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
4.0
4.0
4.0
700
5000
3500
1600
3500
2000
2000
600
2000
800
1000
500
500
1000
500
900
400
400
300
300
6500
5000
3500
5000
1600
3500
2500
2100
4000
2500
1300
2000
600
600
1200
600
750
1000
500
900
400
800
400
8000
2600
6500
% at +25°C mΩ at +25°C
120 Hz % Max 100 kHz Max
DF
ESR
Maximum Allowable
Ripple Current (rms)
mA
at +25°C
100 kHz
486
130
156
230
156
235
235
428
235
371
387
548
469
387
548
428
642
612
742
707
114
130
156
130
230
177
210
229
146
210
291
235
428
428
354
500
383
387
548
428
642
433
612
103
181
114
mA
at +25°C
100 kHz
mA
at +85°C
100 kHz
437
117
140
207
140
212
212
385
212
334
348
493
422
348
493
385
578
551
668
636
103
117
140
117
207
159
189
206
131
189
262
212
385
385
319
450
345
348
493
385
578
390
551
93
163
103
mA
at +85°C
100 kHz
mA
at +125°C
100 kHz
194
52
62
92
62
94
94
171
94
148
155
219
188
155
219
171
257
245
297
283
46
52
62
52
92
71
84
92
58
84
116
94
171
171
142
200
153
155
219
171
257
173
245
41
72
46
mA
at +125°C
100 kHz
Maximum Allowable
Ripple Current (rms)
Maximum
Operating
Temp
MSL
°C
Reflow Temp
≤ 260°C
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
°C
Reflow Temp
≤ 260°C
Maximum
Operating
Temp
MSL
1) To complete KEMET part number, insert M for ± 20% or K for ± 10%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination
Finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2010_T496 • 1/6/2021
7
Tantalum Surface Mount Capacitors – Fused
T496 Fused MnO2
Table 1 – Ratings & Part Number Reference cont.
Rated Rated
Voltage Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Max/5 Min
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
1
1
1.5
1.5
2.2
2.2
3.3
3.3
4.7
4.7
6.8
6.8
10
10
10
15
15
15
22
0.15
0.22
0.22
0.33
0.33
0.47
0.47
0.68
0.68
1
1
1.5
1.5
2.2
2.2
3.3
3.3
4.7
4.7
4.7
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
D/7343-31
X/7343-43
X/7343-43
D/7343-31
X/7343-43
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
D/7343-31
T496B105(1)035A(2)E5K0
T496B105(1)035A(2)E3K1
T496C155(1)035A(2)E4K5
T496C155(1)035A(2)E2K6
T496C225(1)035A(2)E3K5
T496C225(1)035A(2)E1K6
T496C335(1)035A(2)E2K5
T496C335(1)035A(2)E900
T496D475(1)035A(2)E1K5
T496D475(1)035A(2)E700
T496D685(1)035A(2)E1K3
T496D685(1)035A(2)E750
T496X106(1)035A(2)E1K0
T496X106(1)035A(2)E500
T496D106(1)035A(2)E400
T496X156(1)035A(2)E900
T496X156(1)035A(2)E500
T496D156(1)035A(2)E500
T496X226(1)035A(2)E300
T496B154(1)050A(2)E16K
T496B224(1)050A(2)E14K
T496B224(1)050A(2)E10K
T496B334(1)050A(2)E10K
T496B334(1)050A(2)E2K6
T496C474(1)050A(2)E8K0
T496C474(1)050A(2)E1K9
T496C684(1)050A(2)E7K0
T496C684(1)050A(2)E1K7
T496C105(1)050A(2)E5K5
T496C105(1)050A(2)E2K7
T496C155(1)050A(2)E5K0
T496C155(1)050A(2)E2K0
T496D225(1)050A(2)E2K5
T496D225(1)050A(2)E900
T496D335(1)050A(2)E2K0
T496D335(1)050A(2)E1K0
T496X475(1)050A(2)E1K5
T496X475(1)050A(2)E400
T496D475(1)050A(2)E400
0.4
0.4
0.5
0.5
0.8
0.8
1.2
1.2
1.6
1.6
2.4
2.4
3.5
3.5
3.5
5.3
5.3
5.3
7.7
0.1
0.1
0.1
0.2
0.2
0.2
0.2
0.3
0.3
0.5
0.5
0.8
0.8
1.1
1.1
1.7
1.7
2.4
2.4
2.4
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Max/5 Min
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
% at +25°C mΩ at +25°C
120 Hz % Max 100 kHz Max
4.0
4.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
5000
3100
4500
2600
3500
1600
2500
900
1500
700
1300
750
1000
500
400
900
500
500
300
16000
14000
10000
10000
2600
8000
1900
7000
1700
5500
2700
5000
2000
2500
900
2000
1000
1500
400
400
% at +25°C mΩ at +25°C
120 Hz % Max 100 kHz Max
DF
ESR
Maximum Allowable
Ripple Current (rms)
mA
at +25°C
100 kHz
130
166
156
206
177
262
210
350
316
463
340
447
406
574
612
428
574
548
742
73
78
92
92
181
117
241
125
254
141
202
148
235
245
408
274
387
332
642
612
mA
at +25°C
100 kHz
mA
at +85°C
100 kHz
117
149
140
185
159
236
189
315
284
417
306
402
365
517
551
385
517
493
668
66
70
83
83
163
105
217
113
229
127
182
133
212
221
367
247
348
299
578
551
mA
at +85°C
100 kHz
mA
at +125°C
100 kHz
52
66
62
82
71
105
84
140
126
185
136
179
162
230
245
171
230
219
297
29
31
37
37
72
47
96
50
102
56
81
59
94
98
163
110
155
133
257
245
mA
at +125°C
100 kHz
Maximum Allowable
Ripple Current (rms)
Maximum
Operating
Temp
MSL
°C
Reflow Temp
≤ 260°C
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
°C
Reflow Temp
≤ 260°C
Maximum
Operating
Temp
MSL
1) To complete KEMET part number, insert M for ± 20% or K for ± 10%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination
Finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2010_T496 • 1/6/2021
8
Tantalum Surface Mount Capacitors – Fused
T496 Fused MnO2
Recommended Voltage Derating Guidelines
85°C to 125°C
VR
67% of VR
50% of VR
33% of VR
120%
100%
% Working Voltage
% Change in working DC
voltage with temperature
Recommended maximum
application voltage
−55°C to 85°C
80%
% Change in Working DC Voltage
with Temperature
67%
60%
40%
20%
0%
−55
Recommended Maximum
Application Voltage
(As % of Rated Voltage)
25
33%
85
Temperature (ºC)
125
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to
equivalent series resistance (ESR) and the power dissipation
capabilities of the device. Permissible AC ripple voltage
which may be applied is limited by two criteria:
1. The positive peak AC voltage plus the DC bias voltage,
if any, must not exceed the DC voltage rating of the
capacitor.
2. The negative peak AC voltage in combination with
bias voltage, if any, must not exceed the allowable limits
specified for reverse voltage. See the Reverse Voltage
section for allowable limits.
The maximum power dissipation by case size can be
determined using the table at right. The maximum power
dissipation rating stated in the table must be reduced with
increasing environmental operating temperatures. Refer to
the table below for temperature compensation requirements.
Temperature Compensation Multipliers
for Maximum Ripple Current
T ≤ 25°C
1.00
T ≤ 85°C
0.90
T ≤ 125°C
0.40
T = Environmental Temperature
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature
Compensation Multip
KEMET
Case Code
EIA
Case Code
Maximum Power
Dissipation (P max)
mWatts at 25°C
w/+20°C Rise
A
B
C
D
X
E
S
T
U
V
T510X
T510E
3216–18
3528–21
6032–28
7343–31
7343–43
7360–38
3216–12
3528–12
6032–15
7343–20
7343–43
7360–38
75
85
110
150
165
200
60
70
90
125
270
285
Using the P max of the device, the maximum allowable rms
ripple current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
R = ESR at specified frequency (ohms)
Z = Impedance at specified frequency (ohms)
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2010_T496 • 1/6/2021
9
Tantalum Surface Mount Capacitors – Fused
T496 Fused MnO2
Reverse Voltage
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong
polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small
degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated
continuously in reverse mode, even within these limits.
Temperature
Permissible Transient Reverse Voltage
25°C
85°C
125°C
15% of Rated Voltage
5% of Rated Voltage
1% of Rated Voltage
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Case
EIA
W
L
S
V1
V2
W
L
S
V1
V2
W
L
S
V1
V2
B
3528–21
2.35
2.21
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
C
6032–28
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
D
7343–31
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
X1
7343–43
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow
solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform
qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351).
1
Height of these chips may create problems in wave soldering.
2
Land pattern geometry is too small for silkscreen outline.
V1
L
L
W
W
V2
S
Grid Placement Courtyard
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2010_T496 • 1/6/2021
10
Tantalum Surface Mount Capacitors – Fused
T496 Fused MnO2
Soldering Process
The KEMET families of surface mount capacitors are
compatible with wave (single or dual), convection, IR, or vapor
phase reflow techniques. Preheating of these components
is recommended to avoid extreme thermal stress. KEMET's
recommended profile conditions for convection and IR
reflow reflect the profile conditions of the IPC/J–STD–020D
standard for moisture sensitivity testing. The devices can
safely withstand a maximum of three reflow passes at these
conditions.
Please note that although the X/7343–43 case size can
withstand wave soldering, the tall profile (4.3 mm maximum)
dictates care in wave process development.
Profile Feature
SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (TSmin)
100°C
150°C
Temperature Maximum (TSmax)
150°C
200°C
Time (ts) from Tsmin to Tsmax)
60 – 120 seconds
60 – 120 seconds
Ramp-up Rate (TL to TP)
3°C/second maximum
3°C/second maximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (tL)
60 – 150 seconds
220°C*
235°C**
60 – 150 seconds
250°C*
260°C**
20 seconds maximum
30 seconds maximum
6°C/second maximum
6°C/second maximum
6 minutes maximum
8 minutes maximum
Peak Temperature (TP)
Time within 5°C of Maximum
Peak Temperature (tP)
Ramp-down Rate (TP to TL)
Time 25°C to Peak
Temperature
Note: All temperatures refer to the center of the package, measured on the
During typical reflow operations, a slight darkening of the
gold-colored epoxy may be observed. This slight darkening is
normal and not harmful to the product. Marking permanency
is not affected by this change.
Temperature
Hand soldering should be performed with care due to the
package body surface that is facing up during assembly reflow.
difficulty in process control. If performed, care should be
* For Case Size height > 2.5 mm
** For Case Size height ≤ 2.5 mm
taken to avoid contact of the soldering iron to the molded
case. The iron should be used to heat the solder pad, applying
solder between the pad and the termination, until reflow
TP
tP
Maximum Ramp-up Rate = 3°C/second
occurs. Once reflow occurs, the iron should be removed
Maximum Ramp-down Rate = 6°C/second
TL
immediately. “Wiping” the edges of a chip and heating the top
tL
surface is not recommended.
Tsmax
Tsmin
25
ts
25°C to Peak
Time
Storage
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in
other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres,
and long term storage. In addition, packaging materials will be degraded by high temperature – reels may soften or warp
and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40°C and maximum
storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation
on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability, chip
stock should be used promptly, preferably within three years of receipt.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2010_T496 • 1/6/2021
11
Tantalum Surface Mount Capacitors – Fused
T496 Fused MnO2
Construction
Polarity Stripe (+)
Molded Epoxy
Case
Detailed Cross Section
Silver Paint
(Fourth Layer)
Polarity
Bevel (+)
Tantalum Wire
Leadframe
(− Cathode)
Washer
Tantalum Wire
Weld
(to attach wire)
Fuse
Carbon
(Third Layer)
Silver Adhesive
Leadframe
(+ Anode)
Molded Epoxy
Case
MnO2
(Second Layer)
Washer
Ta2O5 Dielectric
(First Layer)
Tantalum
Capacitor Marking
Date Code *
KEMET
Fused MnO2
Polarity
Indicator (+)
1 digit = last number of year
2 = 2012
3 = 2013
4 = 2014
5 = 2015
6 = 2016
7 = 2017
2nd and 3rd digit = week of the
year
01 = 1st week of the year to
52 = 52nd week of the year
st
Picofarad
Code
KEMET
ID
Rated
Voltage
Date
Code*
* 230 = 30th week of 2012
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2010_T496 • 1/6/2021
12
Tantalum Surface Mount Capacitors – Fused
T496 Fused MnO2
Tape & Reel Packaging Information
KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with
EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system
is compatible with all tape-fed automatic pick-and-place systems.
Right hand
orientation
only
(+)
Embossed carrier
(−)
Embossment
Top tape thickness
0.10 mm (0.004”)
maximum thickness
180 mm (7.0”) or
330 mm (13.”)
8 mm (0.315”) or
12 mm (0.472”)
Table 3 – Packaging Quantity
Case Code
KEMET
S
T
M
U
L
W
Z
V
A
B
C
D
Q
Y
X
E/T428P
H
O
EIA
3216-12
3528-12
3528-15
6032-15
6032-19
7343-15
7343-17
7343-20
3216-18
3528-21
6032-28
7343-31
7343-12
7343-40
7343-43
7360-38
7360-20
7360-43
Tape Width
(mm)
7" Reel*
13" Reel*
8
8
8
12
12
12
12
12
8
8
12
12
12
12
12
12
12
12
2,500
3,000
2,500
1,000
1,000
1,000
1,000
1,000
2,000
2,000
500
500
1,000
500
500
500
1,000
250
10,000
10,000
8,000
5,000
3,000
3,000
3,000
3,000
9,000
8,000
3,000
2,500
3,000
2,000
2,000
2,000
2,500
1,000
* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2010_T496 • 1/6/2021
13
Tantalum Surface Mount Capacitors – Fused
T496 Fused MnO2
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
P2
T
T2
ØD0
P0
(10 pitches cumulative
tolerance on tape ±0.2 mm)
A0
E1
F
K0
B1
E2
B0
S1
W
P1
T1
Center Lines of Cavity
B1 is for tape feeder reference only,
including draft concentric about B0.
Embossment
For cavity size,
see Note 1, Table 4
ØD1
Cover Tape
User Direction of Unreeling
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
8 mm
12 mm
D1 Minimum
Note 1
D0
1.5 +0.10/−0.0
(0.059 +0.004/−0.0)
1.0
(0.039)
1.5
(0.059)
E1
P0
R Reference S1 Minimum
T1
T Maximum
Note 2
Note 3
Maximum
P2
1.75 ±0.10
4.0 ±0.10
2.0 ±0.05
(0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002)
25.0
(0.984)
30
(1.181)
0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
Variable Dimensions — Millimeters (Inches)
Tape Size
Pitch
B1 Maximum
Note 4
8 mm
Single (4 mm)
4.35
(0.171)
6.25
(0.246)
12 mm
Single (4 mm)
and Double
(8 mm)
8.2
(0.323)
10.25
(0.404)
E2 Minimum
F
P1
3.5 ±0.05
2.0 ±0.05 or 4.0 ±0.10
(0.138 ±0.002) (0.079 ±0.002 or 0.157 ±0.004)
2.0 ±0.05 (0.079 ±0.002) or
5.5 ±0.05
4.0 ±0.10 (0.157 ±0.004) or
(0.217 ±0.002)
8.0 ±0.10 (0.315 ±0.004)
T2 Maximum W Maximum A0, B0 & K0
2.5
(0.098)
8.3
(0.327)
4.6
(0.181)
12.3
(0.484)
Note 5
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment
location and hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 4).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape (see Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2010_T496 • 1/6/2021
14
Tantalum Surface Mount Capacitors – Fused
T496 Fused MnO2
Packaging Information Performance Notes
1. Cover tape break force: 1.0 kg minimum.
2. Cover tape peel strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
Peel Strength
8 mm
0.1 to 1.0 newton (10 to 100 gf)
12 mm
0.1 to 1.3 newton (10 to 130 gf)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be
165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of
300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
°
T
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Typical Pocket Centerline
Tape
Width (mm)
8, 12
Bo
Maximum
Rotation (
20
°
T)
°
s
Tape
Maximum
Width (mm) Rotation (
8, 12
20
Typical Component Centerline
°
S)
Ao
Figure 3 – Maximum Lateral Movement
Figure 4 – Bending Radius
8 and 12 mm Tape
0.5 mm maximum
0.5 mm maximum
Embossed
Carrier
Punched
Carrier
R
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Bending
Radius
R
T2010_T496 • 1/6/2021
15
Tantalum Surface Mount Capacitors – Fused
T496 Fused MnO2
Figure 5 – Reel Dimensions
Full Radius,
See Note
W3
(Includes
flange distortion
at outer edge)
Access Hole at
Slot Location
(Ø 40 mm minimum)
W2
D
A
(See Note)
N
C
(Arbor hole
diameter)
B
(see Note)
(Measured at hub)
W1
(Measured at hub)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
Note: Drive spokes optional; if used, dimensions B and D shall apply.
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
A
B Minimum
C
D Minimum
8 mm
178 ±0.20
(7.008 ±0.008)
or
330 ±0.20
(13.000 ±0.008)
1.5
(0.059)
13.0 +0.5/−0.2
(0.521 +0.02/−0.008)
20.2
(0.795)
12 mm
Variable Dimensions — Millimeters (Inches)
Tape Size
8 mm
12 mm
N Minimum
W1
W2 Maximum
W3
50
(1.969)
8.4 +1.5/−0.0
(0.331 +0.059/−0.0)
12.4 +2.0/−0.0
(0.488 +0.078/−0.0)
14.4
(0.567)
18.4
(0.724)
Shall accommodate tape
width without interference
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2010_T496 • 1/6/2021
16
Tantalum Surface Mount Capacitors – Fused
T496 Fused MnO2
Figure 6 – Tape Leader & Trailer Dimensions
Embossed Carrier
Carrier Tape
Punched Carrier
8 and 12 mm only
END
Round Sprocket Holes
START
Top Cover Tape
Elongated Sprocket Holes
(32 mm tape and wider)
Trailer
160 mm minimum
Components
100 mm
minimum Leader
400 mm minimum
Top Cover Tape
Figure 7 – Maximum Camber
Elongated Sprocket Holes
(32 mm and wider tapes)
Carrier Tape
Round Sprocket Holes
1 mm maximum, either direction
Straight Edge
250 mm
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2010_T496 • 1/6/2021
17
Tantalum Surface Mount Capacitors – Fused
T496 Fused MnO2
KEMET Electronics Corporation Sales Offices
For a complete list of our global sales offi ces, please visit www.kemet.com/sales.
Disclaimer
All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes
no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury
or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2010_T496 • 1/6/2021
18
工商网监
湘ICP备2023018690号
